id

Understanding Bokeh in Photography: A Complete Guide

Bokeh. Have you heard this term used in conversations while looking at a photo, listened while someone proclaimed that the bokeh in a photo was good or bad, but you’ve been too embarrassed to ask just what it is? Its something every photographer should understand because it affects your image. And whether you know it or not, you’ve probably evaluated the bokeh in your own photos.

Well hide your shame no longer. After reading this article, you will be able to hold your head high and raise your nose as you talk about the bokeh in your next photo.

Table Of Contents:

Continue reading Understanding Bokeh in Photography: A Complete Guide



  • Photography Tips & Tricks
  • bokeh
  • depth of field

id

Playing It Safe? How to Step Outside Your Comfort Zone

It’s incredibly easy to settle into the comfort of the familiar—the same routines, the usual habits, and the paths well-trodden. But somewhere in the back of your mind, isn’t there a small voice urging you to shake things up, to take a risk, to venture into uncharted territory?  Maybe you’ve experienced this feeling while watching someone fully immerse themselves in their craft on stage—whether through music, dance, or a bold stand-up routine. Isn’t it absolutely thrilling? I’ve always been captivated by those moments. There’s something magnetic about witnessing someone throw caution to the wind and dive headfirst into their passion. It’s like watching a rockstar being born right in front of your eyes. This bravery, this unfiltered expression of self, isn’t just reserved for the few. It’s something we all possess. But it demands that we stop playing it so damn safe. Step Outside Your Comfort Zone The truth is, comfort zones are often padded with fear—fear of failure, fear of judgment, fear of the unknown. Yet, every major breakthrough in creativity and personal growth sprouts from stepping beyond these boundaries. Jon Batiste, a maestro of emotion and authenticity, once expressed the dual reality of embracing potential failure with unwavering...

The post Playing It Safe? How to Step Outside Your Comfort Zone first appeared on Chase Jarvis.

The post Playing It Safe? How to Step Outside Your Comfort Zone appeared first on Chase Jarvis.




id

Ryan Holiday: Stoic Values to Change Your Life

In this episode, Ryan Holiday explores the timeless wisdom of Stoicism and its relevance to contemporary challenges. A frequent guest and renowned author, Ryan discusses his latest book, “Right Thing. Right Now.: The Necessity of Doing What’s Right – Even When It Isn’t Easy,” the third installment in his Stoic Virtue series. Emphasizing justice as the cornerstone of courage, wisdom, and self-discipline, Ryan draws on historical examples from Marcus Aurelius to Gandhi to illustrate the transformative power of ethical living. Some highlights we explore: How to make a meaningful impact by focusing your efforts on specific problems. The development of the Stoic Virtue series and its modern relevance. Practical advice for navigating ethical decisions in complex situations. How to make stoic principles more relatable. How one balances speed and quality in the creative process. And much more! Enjoy! FOLLOW RYAN HOLIDAY: instagram | twitter | website Listen to the Podcast Subscribe  

The post Ryan Holiday: Stoic Values to Change Your Life first appeared on Chase Jarvis.

The post Ryan Holiday: Stoic Values to Change Your Life appeared first on Chase Jarvis.




id

Cal Newport on The Dark Side of Modern Productivity

In this episode, Cal Newport shares his revolutionary approach to productivity from his new book, Slow Productivity: The Lost Art of Accomplishment Without Burnout. Cal, a computer science professor at Georgetown and author of Deep Workand Digital Minimalism, explores how principles from historical figures like Newton, Galileo, and Jane Austen can help us thrive in today’s fast-paced world. We discuss his ‘lost art’ approach, debunk the myth of multitasking, and examine how technology impacts our focus and mental well-being. Some highlights we explore: How Newton’s work habits can be integrated into modern productivity practices. Why focusing on single tasks is more effective than multitasking. Advice on reducing social media’s impact to regain focus. Techniques from Cal’s new book to accomplish more without burning out. And more! Enjoy! FOLLOW CAL NEWPORT: twitter | youtube | website Listen to the Podcast Subscribe  

The post Cal Newport on The Dark Side of Modern Productivity first appeared on Chase Jarvis.

The post Cal Newport on The Dark Side of Modern Productivity appeared first on Chase Jarvis.




id

The Dark Side of Productivity Myths Exposed

In this episode, Oliver Burkeman gets real with me about the power of embracing limits to unlock a richer, more productive life. We talk about his book, Meditations for Mortals, and unpack why so much of traditional time management is flawed. Instead of chasing perfection, Oliver shows how small, intentional steps and accepting our constraints can actually lead to more freedom and fulfillment. His take on “imperfectionism” and the value of presence offers a fresh way to tackle life’s demands. Some highlights we explore: Shifting from private doubts to taking small, meaningful actions Using “imperfectionism” to overcome perfectionism’s trap Letting go of control to reduce stress and gain momentum Enjoy! FOLLOW OLIVER BURKEMAN: twitter | website Listen to the Podcast Subscribe

The post The Dark Side of Productivity Myths Exposed first appeared on Chase Jarvis.

The post The Dark Side of Productivity Myths Exposed appeared first on Chase Jarvis.




id

Leveraging Automated Market Analyzers: A Developer’s Guide to Building Financial Tools with Web Technologies

Building financial tools has never been more accessible. With the rise of web technologies, developers can create powerful market analyzers that are quick, responsive, and packed with features that were previously only available to large trading platforms. Here, we outline [...]

Read Article

The post Leveraging Automated Market Analyzers: A Developer’s Guide to Building Financial Tools with Web Technologies first appeared on CSS Reset.




id

How to Create a Phone Widget App Icon in Figma

Welcome back to another Figma based tutorial, in which we’re going to take a quick look behind the process of creating a phone widget app icon, using nothing more than a couple of basic geometric shapes. So, assuming you already have the software up and running let’s jump straight into it! Tutorial Details: Phone Widget […]

The post How to Create a Phone Widget App Icon in Figma appeared first on Vectips.




id

Famoid

Famoid is the best option to get all social media services in one platform. High quality & Safe services. The brand new way to be a Famous!




id

iPhone vs Android – Which One’s Better?

I read this line on a website. “Apple diehard fans would be tempted to buy a live pig if it had the familiar logo branded on its backside”. Ha! I wondered what that might look like, so I tried to draw a picture in my mind and this was the outcome. Jokes aside people, I...




id

Create a Responsive WordPress Theme – Video Tutorial – 2

I am pretty excited to bring you the Part 2 of the ongoing Video Series on How to create a Responsive WordPress Theme. As in the previous video, I will be explaining how to code each webpage element using Bootstrap Framework and integrate it into WordPress. You can also download the updated theme files that...




id

Create a Responsive WordPress Theme – Video Tutorial – 3

This is the third part of the Video Tutorial Series on How to Create a Responsive WordPress Theme using the Bootstrap Framework. In this part, I have demonstrated how to create a full width parallax image section, a recent blog posts section and a footer. An updated zip file with the related theme files are...




id

How to Create Green Screen Videos with CapCut

Improvements in cameras and image filtering have made it easy to create videos with green screen effects from the comfort of your phone (without requiring a real green screen). I use CapCut in the example below, but you’ll find similar functionality within Instagram and any other reputable video creation app. Sometime during 2023, I started […]



  • Improve Your Site

id

A Digital Nomad’s Guide to Australia on a Subclass 600 Visa

In an era where remote work continues to thrive, the concept of being a digital nomad has gained significant traction. As boundaries blur and opportunities become global, many adventurous souls seek to combine work with travel, exploring new destinations while maintaining their professional endeavours. Australia, with its stunning landscapes, vibrant cities, and thriving economy, often […]

The post A Digital Nomad’s Guide to Australia on a Subclass 600 Visa appeared first on Australian Visa Experts.




id

Fossils Woven on a Bed of Embroidery

Loin d’effectuer un travail archéologique (quoique…), Rachel Crisp alias @bluesunthreads créé des broderies inspirées par la nature. L’artiste, photographe et guide touristique réalise des œuvres sur lesquelles figurent des crânes de dinosaures, entourés de végétation. Travaillant sur plusieurs formats l’artiste donne l’impression, grâce à son travail sur la texture, que ces os reposent sur le […]




id

When is the last time you said “I’m sorry”?

In December of 2012, I officially became a parent. Thinking back on those first years of my daughter’s life (before our other kids), it’s amazing the things you remember and forget (until something reminds you). Now that she’s a bit older, I see that one of the easy things to forget is what a handful …

The post When is the last time you said “I’m sorry”? appeared first on Nathan Rice.




id

The introvert’s guide to navigating a professional world designed for extroverts

About a month into the economic shutdown that came as a result of the COVID-19 pandemic, I started to notice something that was, let’s say, peculiar. At least peculiar to me. I’m an introvert. I certainly don’t deny that. The “stay at home” orders were really not a problem for me or my family. I …

The post The introvert’s guide to navigating a professional world designed for extroverts appeared first on Nathan Rice.





id

Pushing Creative Boundaries With Experimental Video Effects

Video effects have revolutionized how we experience visual forms of entertainment. They're used in almost every type of show, commercial, or film available ...




id

Introducing The Best Free Video Editing App Of All Time: CapCut

CapCut is a multifaceted one of the best free video editing mobile application that offers many features and tools to elevate the quality of your influencer ...




id

Harry Potter And The Forbidden Party

Step into a realm where the magical world of Harry Potter collides with the captivating aesthetics of HBO's Euphoria, giving birth to an AI-generated Hogwar ...




id

18 Clever Logo Design Ideas: Fresh Showcase Of Creativity

The gallery features a collection of 18 cleverly implemented logo design ideas that highlight the art of logo creation. These logos showcase not only smart ...




id

Plugin: Responsive WordPress Grid Layout Plugin

Grid Layout Shock is the most complete responsive WordPress grid layout plugin. You can select between 8 box styles preloaded to costumize your own grid layout. You can select the components that you want to show, if you want to show the title, the image, the excerpt of the text or neither, you can do […]




id

How to Make a Grid in Adobe Illustrator (Rectangular and Polar)

Are you looking for a way to create an effective grid system in Adobe Illustrator? If so, then you've come to the right place! This quick tutorial will teach you how to make a comprehensive and visually appealing grid using the popular vector graphics software. While creating grids manually can be time-consuming, with this tutorial,...

The post How to Make a Grid in Adobe Illustrator (Rectangular and Polar) appeared first on Bittbox.




id

Guide to the Free Transform Tool in Adobe Illustrator

Who doesn't want their designs to stand out? If you want to make your design unique, you have to go beyond the same old shapes. In such case, the Free Transform Tool is what you need. This tool allows you to manipulate your objects and shapes in many ways. This tutorial will provide you with...

The post Guide to the Free Transform Tool in Adobe Illustrator appeared first on Bittbox.




id

Presentation Slides: Frontend 2010, Norway

On Sep 2nd, 2010, I spoke at a design conference called Frontend 2010 (hosted by IXD) in Oslo, Norway. Below is the slide of my presentation. You may read the recap on Web Designer Wall or download the presentation at SlideShare.





id

22 passive income ideas to achieve financial freedom

Earn while you sleep: Realistic passive income ideas you can pursue part time! Ditch the 9-5 with the right idea, hard work, & these essential tools.




id

WooCommerce stores are revving up for Black Friday: The 2024 holiday trends survey

As ecommerce revs up for the holidays, it's time to prepare. Brand new survey data for Black Friday 2024 stats and trends from your friends at Woo.




id

2024 Black Friday trends: Top strategies from Woo stores and partners

Black Friday trends: Understand the best practices and favorite tools for your WooCommerce store's Black Friday marketing strategy.




id

Prepare your checkout for the holidays: 5 ways to reduce cart abandonment with Amazon Pay

Make the most of the holiday shopping season — convert more visitors into customers. Quick changes that can make a big difference in 5 steps.




id

Competitive analysis — What to do before you commit to your next great business idea

Planning a new online business? Conduct a competitive analysis to understand your market, beat your rivals, and position your brand for success.




id

Florida to Colorado with 4Runner and Liteboat Rowing Shell

In late November, I embarked on an 8-day trip from Colorado to Florida and back. The primary goal was to bring home a rowing shell and, of course, capture as many pictures and video clips as possible. I drove my […]






id

Tidy Birds and Neat Bees: on Conscientiousness in Animals

By Mikel Maria Delgado Aeon Human personality theory has long revolved around what we know as the ‘Big Five’ – five dimensions of personality that cover a large swathe of how humans behave across time and contexts. These dimensions are … Continue reading




id

Is your idea worth doing?

Have you ever been asked to get creative? Or told to think outside the box? If so, you might have had one of two reactions (or maybe a combination of the two):

  1. Hooray! No restrictions. Let’s go! 
  2. Yikes! The possibilities are endless. Where do I start?

Regardless of how you might react, it’s crucial to keep the original ask in mind — not “get creative,” but the reason you were charged with getting creative or thinking outside of the box in the first place. Losing sight of the goal or falling into the trap of thinking that a strategic approach isn’t actually “creative” are the fastest ways to the land of no progress and stifled creativity. 

I think the best ideas come out of a harmonious combination of strategic and creative thinking. I’m not the only one; product designers often have a foundations-first approach to their work where they consider a baseline strategy before jumping into high-fidelity mock-ups. Strategists leverage innovation workshops to both strategically and creatively problem solve. And developers weigh cost and functionality tradeoffs when designing and building reproducible and deployable systems.

Problem solving, creative thinking, and focus are universal components of work-life – and life-life. Leveraging a tool to help you do all three isn’t a cop out, it's a way to help you get to the fun stuff (the ideas worth doing) faster. 

One tool that can help you confidently pursue your idea is an Impact and Feasibility Matrix, which will help you focus and narrow in. Your focus will keep you on track, and narrowing in on what ideas are worth doing will illuminate the way forward. Let’s dive in… 

Focus

Step one is keeping your goal in mind. To do so, revisit these questions often:

  • How does this help solve the problem?
  • How does this contribute to an ideal outcome?

Narrow In

Step two is identifying which creative idea is worth pursuing. One way I like to narrow in and confidently move forward is by plotting ideas on an Impact + Feasibility matrix

Impact is:

  • Reach. What percentage of your audience or stakeholders will be impacted by your idea?
  • Relevance. Does your idea target your key audience? 
  • Longevity. How long will your idea impact your team? 

Feasibility is:

  • Costs. What are your hard costs? This includes both the time investment and monetary investment. 
  • Ease. How easy is your idea to execute? Is this something you can tackle on your own? Will you need to outsource your idea to a partner or vendor? 

The answers to all of these will be unique to your role, the problem you are trying to solve, and your organization. That said, somewhere between impact and feasibility, usually in the upper right quadrant of the matrix, is your sweet spot. This is true regardless of role, problem, or organization. Ideas in the sweet spot are usually worth doing. They reach a relevant audience for your targeted time frame, they are achievable, and within budget.  

Your impact and feasibility matrix will be unique to each problem you are trying to solve. Let’s take a look at some real examples. 

Examples

Problem: Help a newly distributed team settle in to working remotely. 

In the spring of 2020, many organizations (Viget included), were charged with supporting newly distributed teams. Throughout that year, we focused on surprising our team in new ways (think care packages containing branded sweatpants), removing barriers to communication, and improving access to resources (we implemented People Team office hours which we still keep to this day). We did send everyone their favorite candy and had local folks help deliver monitors to their teammates. We still don’t have Viget branded dog swag – maybe one day. 

Problem: Help team members get to know each other during weekly company-wide meetings. 

Each week, we host a company-wide all hands meeting. It’s a tradition we’ve kept since we were founded in 1999. The meeting has evolved over the years and so has our strategy for connection. This is a matrix we revisit often, some ideas we tweak and try again and others like requiring cameras-on or implementing a roll call isn’t something we would consider doing. 

To Sum It Up

The next time you find yourself spinning your wheels, or better yet, the next time you're tasked with thinking outside the box, focus first and plot your ideas on the impact/feasibility matrix. Doing so will help keep you on track and quickly narrow in on which ideas are worth pursuing. 




id

A Guide to Accessibility Resources for Global Accessibility Awareness Day

Global Accessibility Awareness Day (GAAD) is May 16, 2024! GAAD was created to help bring attention and awareness to digital inclusivity. No matter your role on a project team, digital accessibility should always be a priority from start to finish. Why is accessibility so important?

  • Over 1 billion people worldwide have a disability, and that number is growing every day
  • 15% of people with disabilities say they never go online, compared to 5% of people without disabilities, according to Pew Research Center
  • According to a survey by Click-Away Pound, 71% of disabled users are forced to leave a website if they find it difficult to use

Digital accessibility directly impacts people’s ability to access information, buy products, apply for jobs, engage in discussion, and everything else that people do online that is becoming critical for modern life. Accessible spaces even benefit people without disabilities, as it allows anyone to take in content though their preferred method (reading the captions on a video instead of listening in a noisy environment, for example), and often breeds innovation as engineers work to find the best way to be sure everyone can access information equally.

The World Wide Web Consortium (W3C) has developed the Web Content Accessibility Guidelines (WCAG) in an effort to standardize digital accessibility. However, many websites unfortunately fail to meet these standards, leading to a lesser-quality user experience. WebAIM’s yearly report has highlighted some surprising statistics about WCAG across the top 1,000,000 home pages:

  • The most common accessibility failure across home pages is low contrast text
  • 98.1% of home pages have at least one WCAG 2.0 failure
  • On average, there are 56.8 accessibility errors per page (this increased 13.6% from 2023!) 
  • 16.8% of home pages had more than one <h1> tag

As you can see, there is still a lot of work that needs to be done to create a more accessible web for everyone. If you’re interested in learning more about digital accessibility and how to improve accessibility on your own projects, there are plenty of resources and online courses available. Resources range from free, to paid courses, to professional certifications. Below are some courses and resources that we recommend.

Free Courses and Resources

If you’re looking to introduce yourself to digital accessibility, these free resources are a great place to start:  

  • A11ycasts with Rob Dodson - A series of video tutorials on YouTube that highlights topics including semantics, focus, the correct way to use a button, and a11y testing
  • The Beginner’s Guide to Web Accessibility - An article by Dequeue University that summarizes why digital accessibility should be a priority, and how to determine if your website is accessible
  • Common Mistakes with Using Colour in Accessibility - Digital designer Andrée Lange provides insights into how to take color contrast into consideration when designing for the web
  • Deque Accessibility Resources - Dequeue offers a variety of free accessibility resources, including webinars, blog posts, and their accessibility testing browser extension, axe DevTools
  • HTML Semantics and Accessibility Cheat Sheet - WebAIM provides a list of the most common HTML tags that have an impact on digital accessibility
  • MDN Accessibility Tutorials - MDN is an open-source project documenting web technologies, which also includes an informative section on web accessibility documentation and best practices
  • Section 508 ICT Testing Baseline - Outlines minimal accessibility testing requirements for federal agencies subject to Section 508
  • WCAG 2.2 Quick Reference - WCAG are a series of web accessibility guidelines released and maintained by the W3C, with 2.2 being the current version of the guidelines. This page provides a reference to standards that websites should meet in order to meet current accessibility standards
  • Web.dev Learn Accessibility Course - A series of informative articles ranging from beginning a11y topics, to more advanced topics including animation and motion

Deep Dives with Paid Tutorials

If you’re a developer who has experience in accessibility and want to dig more into the topic, these comprehensive tutorials will help you improve your a11y knowledge:

  • Accessible Web Academy - Accessible Web Academy includes more focused a11y courses for designers, developers, content creators, and marketers looking to target specific topics 
  • Inclusive Components - There is a free online summary of Heydon Pickering’s Inclusive Components, but you can also purchase an eBook on the topic. Heydon’s blog provides examples of a pattern library that bakes accessibility into each component
  • Practical Accessibility by Sara Soueidan - Sara Souedien is a prolific front-end developer who specializes in accessibility. Her course, Practical Accessibility, is a comprehensive guide for all developers, from those looking to familiarize themselves with accessibility, to experienced developers looking to expand their a11y knowledge.

Advanced Knowledge with Certifications

As the world’s population and number of disabled users continues to grow, it’s clear that implementing digital accessibility in your products is more important than ever. By implementing the information from these lists, you can help users of all abilities access the content that you share, ensuring a better internet for everyone.




id

Self-Host Your Identity Provider with authentik

Authentication! What a hassle!

Evans, where's that SAML from Earth!?

You start off simple enough — username / password authentication in your application. Then, well, someone mentions that traditional passwords are a security vulnerability, so maybe we should use one-time passwords. That inevitably leads to discussions about magic links and multi-factor authentication. Next thing you know, one dev is in a corner, rocking back and forth and muttering something about SAML, and another dev just left — walked out the door, never to be seen again.

Well, not to worry, we've got just the tool for you.

authentik is an open-source identity provider written in Python. I'm going to focus on the self-hosted version, but they also offer a paid enterprise plan if you want some extra support.

Self-Hosting

The philosophy of open-source tools and self-hosting is a big, complex topic for another post. In the world of SaaS products, you likely don't need to self-host. I quite like hosted identity providers like Clerk and Auth0. They're good and appropriate solutions for different types of apps and companies.

But I just love to self-host tools. Tinkering and toying with Docker, reverse proxies, and sometimes even server hardware is a lot of fun to me. It does add complexity in some (or many) places, but a little extra complexity means you've got a little more control over your tooling.

Self-hosting also allows me to disconnect from the Internet and still be able to work on features and enhancements in my projects. As long as I've already installed the relevant packages or pulled the right Docker images, I can keep working if I'm in a place where I can't (or don't want to) connect to the Internet. This is a small thing, but really important to me.

authentik makes it really easy to self-host your application. Right out of the gates, they provide a Docker Compose example and a Kubernetes example. Getting authentik running took me about 10 minutes using the Docker Compose example. Most of that was reading. This can make authentik a great tool during the proof-of-concept or beta phase of your application, getting authentication out of the way so you can focus on building the cool and unique features of your app.

Integrations

One of the great things that authentik has waiting for you is a bunch of documentation on integrating with a lot of tools you probably already use. These integrations range from other self-hosted apps like Outline (another favorite of mine) to cloud providers like AWS and even platforms like WordPress.

authentik's integration docs show you how to set up authentik for your existing providers and applications, so no need to dig around for the right configuration. Sure, if you're building your own application, you don't have the luxury of a README (until you write one, of course!), but don't worry — all the documentation you'll need for your choice of providers is at your fingertips. Personally, I'm fan of the OAuth2 provider for most my pet projects, but I also find the Proxy Provider to be a really great tool if you want to secure a static site that doesn't have any means of authenticating users.

Customization

This is a pretty nice default login screen, but maybe a mountain road isn't your vibe. You can change this background, add your own company logo, and add your own CSS. Just add your static files to your authentik deployment and modify to your heart's content.

But actually, that's not even the cool part of the customization to me.

authentik has the concepts of Flows and Stages that are used to determine what steps a user should take to log in, log out, and more. First, you define Stages that represent a single step of authentication — something like requiring a user to enter their username or a password. There's a whole lot to choose from. Once you've set up your Stages, you'll create a Flow, stringing those Stages together until you have a complete process to authenticate, register, or even delete a user. Flows can be imported and exported as .yaml files, making it easy to keep your Flows and Stages synced between different environments.

authentik comes with a pretty reasonable set of default Flows and Stages. If you're setting authentik up just to try it out, you might not need to add anything. They do have a couple of example Flows to get you started, though.

Flows and Stages can feel pretty intimidating. On your dev server, I'd recommend basically deleting all of the default Flows and Stages and building up new ones from scratch. It's the easiest way to learn how these pieces fit together. If you accidentally break something in dev, you can always just drop your database and spin up a fresh install.

Conclusion

authentik is an awesome tool and I've only scratched the surface of what it can do for you. As a self-hosted identity provider, it gives you a lot of control on how your services are authenticated. It's great for local development and beyond, and it has a lot of ready-to-go integrations for services you might already use.

If you're interested in further reading, I'd definitely recommend checking out the docs on Outposts and External Sources.

Hopefully this has given you some inspiration to spin up a local instance of authentik and try it out! It will definitely simplify your authentication needs.

Here's your SAML, Mr. Horrible Gelatinous Blob!




id

Fluid Breakout Layout with CSS Grid

So you're building a site and you've got a nice containing element around your content — but wait! Not all the content is the same width! That nice, neat tube of content is not so much a straight tube as a pile of different sized bricks.

It's a common layout problem, but how do we account for these 'breakout' widths in the layout? There's a couple ways we could go about it:

  • Encapsulate each component and set widths and margins. (Works fine if you have full control but can be fiddly).
  • Force the component out of the containing element with negative margins. (Works fine if there's only a little deviation).
  • Use CSS Grid to build a fluid universal grid! (????).

That last one is what we'll be exploring: how to use CSS Grid definitions to allow for consistent component sizing across all breakpoints — no media queries required!

This is a technique that's based on Ryan Mulligan's 'Layout Breakouts' which is based on Josh Comeau's 'Full-Bleed Layout' and is especially useful when creating a fully fluid layout. This also pairs well with fluid type techniques resulting in layouts that TRULY scale with the viewport size.

Setting Up the Grid #

Here's the layout we're going to be building:

If we break apart the design, we've got 4 possible widths for components:

  • Full-Width
  • Feature
  • Popout
  • Content

We've also go some special side-anchored elements that 'stick' to one of the screen edges but also honor the other element widths. We'll come back to these later on.

Now that we've categorized the widths, lets start drawing column edges and defining areas:

  1. Left margin / Full-Width
  2. Left Feature
  3. Left Popout
  4. Center Content
  5. Right Popout
  6. Right Feature
  7. Right margin / Full-Width

That's a lot of columns!

Yet on mobile, we only need 3 columns, just left margin (1), center content (4), and right margin (7). We want some of these intermediate columns to disappear!

Fortunately, CSS Grid gives us some powerful tools to create the measurements needed—yes, even for the disappearing columns! We won't even have to write any media queries for this one. We can make just ONE definition that works at all sizes.

We'll store our measurements as CSS variables for easy use later on:

:root {
  --gap: clamp(1rem, 4vw, 2rem);
  --full: minmax(var(--gap), 1fr);
  --feature: minmax(0, 12vw);
  --popout: minmax(0, 2rem);
  --content: min(clamp(30rem, 52vw, 60rem), 100% - var(--gap) * 2);
}

Let's break these down.

--gap: clamp(1rem, 4vw, 2rem);

gap will be our side margin, allowing it to stretch up to 2rem at max, with a preferred width of 4vw, but never going below 1rem.

--full: minmax(var(--gap), 1fr);

We're going to use the minmax() function for these next three measurements to say: "If there's room in the CSS Grid, you can expand out to here but then don't go smaller than the minimum".

The full area is going to expand from left edge to right edge (remember we have to split the areas to allow for the other columns) and will double as our margin, so we'll pop in our gap value as our minimum and tell it that it can expand up to 1fr, or basically as much space as the rest of the grid will allow it.

--feature: minmax(0, 12vw);
--popout: minmax(0, 2rem);

The feature and popout both have a minimum value of 0. This is what powers our disappearing columns! As other areas of the grid expand, these will collapse when there's no longer any room for them, essentially taking up no space.

--content: min(clamp(30rem, 52vw, 60rem), 100% - var(--gap) * 2);

And then finally, our content area is our most complex measurement. It's saying, take the minimum value of either:

  1. A fluid measurement that can be 30-60rem (with the help of clamp())
  2. OR full width minus our gap value (but doubled for both left and right values).

These measurements can be changed to fit the needs of your layout. Specifically the feature and popout maximum values and the first content value. For example, our use of vw for the feature means it will fluidly expand out as the screen grows whereas the popout will remain only 2rem larger on each side than the content column.

Now we can assemble these measurements in a CSS grid column definition. We'll name our column edges with [custom-ident] and use the -start and -end endings to help make assignment easier later on.

.grid-breakout {
  display: grid;
  grid-template-columns: [full-start] var(--full)
    [feature-start] var(--feature)
    [popout-start] var(--popout)
    [content-start] var(--content) [content-end]
    var(--popout) [popout-end]
    var(--feature) [feature-end]
    var(--full) [full-end];
}

The definition is complex, but if we visualize the start and end lines of our columns as well as the measurements, it looks like this:

You can see we have our middle content column, our disappearing feature and popout columns, and finally our full columns that double as our margin.

To finish off the definitions, we need to create column assignments. Because we named our columns with custom identifiers and specified the start and stop lines, we don't have to fiddle with grid numbers. We can assign them directly like:

.full {
  grid-column: full;
}

.feature {
  grid-column: feature;
}

.popout {
  grid-column: popout;
}

.content {
  grid-column: content;
}

And if we want to create a default assignment for elements in the grid (which is especially useful if you don't have full control over the markup) you can create one like this:

.grid-breakout > * {
  grid-column: content;
}

Now you can attach any of these classes to components in your grid and have them snap to the width you want.

Watch the screen capture below as the grid scales down. You can see the feature and popout columns disappearing as everything transitions to a mobile width, and then expands back up.

You can see a demo of the base setup here:

Nesting Grids #

Now let's go back to our header element. You can see that though the header is full-width, we actually want its inner content to honor the feature width.

Fortunately, because of the flexible nature of this grid definition, we can repeat the definition and then continue using the same column names on the inner structure. Because our grid only goes one layer deep we're free to replicate as much as we need or even break out and use different layout methods for the component interiors.

<main class="grid-breakout">
  <section class="full grid-breakout">
     <div class="feature">
        <!-- inner content -->
     </div>
  </section>
</main>

You can see it in action here:

Anchoring Left and Right #

Remember those side-anchored components? This is where we need to get a little tricky to line everything up.

Going back to our diagram, we want an element to span MOST of the way across the page, but end at the opposite feature edge. We can reuse our column definitions for the first part.

.feature-left {
  grid-template-columns: full-start / feature-end;
}

Great! That gives us exactly what we want... except for when we try to nest the grids.

Our original grid definition assumes that our content, while different widths, is centered in the window. We have to rethink our inner grid definition a little bit.

We're shaving off one end of the grid, specifically a full definition. So two things need to happen:

  1. We need to adjust our content width to now account for only having one gap.
  2. We need our new grid end to stop at the edge of the feature column.

We can achieve this with a new measurement and a new grid definition:

:root {
  /* previous definitions... */
  --content-inset: min(clamp(30rem, 52vw, 60rem), 100% - var(--gap));
}

.grid-breakout-feature-left {
  display: grid;
  grid-template-columns:
    [full-start] var(--full)
    [feature-start] var(--feature)
    [popout-start] var(--popout)
    [content-start] var(--content-inset) [content-end]
    var(--popout) [popout-end]
    var(--feature) [feature-end full-end];
}

We've replaced the inner content measurement with the new value and combined the feature and full ends with the final line of the template column definition:

[feature-end full-end]

This will allow redefinition inside the new side-anchored component. You will notice that you'll need to supply your own padding for the inner as they no longer have that final margin to prevent it from reaching the new grid edge.

<main class="grid-breakout">
  <section class="feature-left grid-breakout-feature-left">
    <div class="feature">
      <!-- inner content -->
    </div>
  </section>
</main>

If you want to reverse this to be anchored to the right, you can flip the grid definition, moving the double start to the top like:

.grid-breakout-feature-right {
  display: grid;
  grid-template-columns:
    [full-start feature-start] var(--feature)
    [popout-start] var(--popout)
    [content-start] var(--content-inset) [content-end]
    var(--popout) [popout-end]
    var(--feature) [feature-end]
    var(--full) [full-end];
}

You can see a demo of the side-anchored component here:

But What About Tailwind! #

We love using Tailwind at Viget as a Team Accelerator™, and it's straightforward to implement these measurements and definitions in your Tailwind config.

/** @type {import('tailwindcss').Config} */
import plugin from "tailwindcss/plugin";

export default {
  // the rest of your other definitions
  theme: {
    // the rest of your theme definitions
    extend: {
      gridColumn: {
        content: "content",
        popout: "popout",
        feature: "feature",
        full: "full",
        "feature-left": "full-start / feature-end",
      },
      gridTemplateColumns: {
        breakout: `[full-start] var(--full)
            [feature-start] var(--feature)
            [popout-start] var(--popout)
            [content-start] var(--content) [content-end]
            var(--popout) [popout-end]
            var(--feature) [feature-end]
            var(--full) [full-end]`,
        "breakout-feature-left": `[full-start] var(--full)
            [feature-start] var(--feature)
            [popout-start] var(--popout)
            [content-start] var(--content-inset) [content-end]
            var(--popout) [popout-end]
            var(--feature) [feature-end full-end];`,
      },
    },
  },
  plugins: [
    plugin(function ({ addBase }) {
      addBase({
        ":root": {
          // grid sizing variables
          "--gap": "clamp(1rem, 4vw, 2rem)",
          "--full": "minmax(var(--gap), 1fr)",
          "--content": "min(clamp(30rem, 52vw, 60rem), 100% - var(--gap) * 2)",
          "--popout": "minmax(0, 2rem)",
          "--feature": "minmax(0, 12vw)",
          "--content-inset": "min(clamp(30rem, 52vw, 60rem), 100% - var(--gap))",
        },
        // force unspecified content blocks into 'content' grid
        ".grid-cols-breakout > *": {
          "grid-column": "content",
        },
      });
    }),
  ],
};

Everything is effectively the same, but you'll call your grid classes like grid-cols-breakout to set the grid, and your columns like col-feature per Tailwind naming conventions.

Forwards to a Fluid Future! #

And there you have it! A media-query-less fluid breakout layout defined with CSS grid!

While the setup is more complicated at first glance, I've found that the more fluid your layout rules are, the FEWER rules you have to write overall! Especially when paired with fluid type, dynamic viewport units, and all the amazing features that are landing in CSS — it's truly a fluid future!



  • Code
  • Front-end Engineering

id

Agency Partnerships: A Rising Tide Lifts All Boats

For agencies like ours, success doesn’t come from being an expert at everything—a big part of it is complementing our expertise and working hand-in-hand with like-minded partners who share our values and standards.

These partnerships haven't just boosted what we can do, they've created opportunities for us to engage with new clients. Here's how these collaborations have made us—and our partners—stronger:

  1. Incremental Value: We have a deep respect for expertise. We believe If you try to be an expert at everything, it’s difficult to be exceptional at anything. By teaming up with partners who bring different skills and services to the table, we get access to all sorts of proficiencies we wouldn't have on our own, adding value to prospective and existing clients. Instead of “That’s not our area of expertise”, now it’s “Yes, we can help with that.” These alliances empower us to deliver a higher level of service and comprehensive results for our clients.
  2. Mutual Scalability: Sometimes, there’s a ton of demand for what we do, and it's hard to keep up. Strategic partnerships mean we can call in reinforcements when we need them. By tapping into our partners' talent pools, we can handle even the most time-sensitive client demands without sacrificing quality or speed. And it’s mutual. When our team has time available, we are the reinforcements instead.
  3. More Leads, More Growth: In a crowded market, having a steady stream of clients is crucial. Naturally, every knock on our door can’t be a great fit. Through our partnerships, we've built a network of agencies that share our values, quality standards, and culture. By working closely together and passing leads back and forth, we've created a symbiotic ecosystem where projects flow smoothly, keeping all of us busy and growing.
  4. Reaching New Frontiers: Exploring new markets or industries can be risky, especially if you don't know the terrain. That's where partnerships come in handy. With an experienced partner on your team, it cracks open a door to reach new customers that may have otherwise been too difficult to open on your own. By teaming up with others who know the ropes in different areas (e.g. machine learning, hardware prototyping, reputation management, etc.), we can expand our reach, and establish ourselves in new segments with confidence.
  5. Getting Creative Together: Innovation flourishes when different minds come together under a set of constraints. By teaming up with partners who bring fresh ideas to the table, whether through smaller things like adding feedback to a partner’s open-source library, or bigger things like discussing AI’s impact on the web, we create a space where new approaches can flourish. (And, well, it’s our namesake after all).
  6. Professional Development: Values like “learn & grow” are part of a rewarding career at Viget. The symbiotic ecosystem created in our partner network provides opportunities for knowledge sharing. Partners help us solidify new skills including teaching others. Our own expertise shared with our peers gets reciprocated—each agency broadening the other’s horizons and leveling up one another’s teams. 

In the end, strategic partnerships are an important ingredient in our recipe for success. They give us access to all sorts of perks we wouldn't have on our own, and they help us build a community of successful agencies and contractors who all value the power of teamwork. 




id

RIP a Livecast #637 – 24 and Stupid

We kicked things off by talking about the new member of Noa's family. We then discussed the MTV Video Music Awards, and Madonna's "controversial" look. We also discussed Megan Fox […]



  • RIP a Livecast

id

GENE SIMMONS Says VAN HALEN "Destroyed" BLACK SABBATH On Tour: "Tony Iommi Admitted It, And So Did Ozzy"

There will never be another Eddie Van Halen.




id

A Guide for Writing Brochures and Uploading Them to Your Website

Even though digital types of content have taken over the marketing landscape, brochures still hold an enduring relevance as a powerful communication device. These portable companions, often overlooked in the modern age, hold the potential to inform, inspire, and captivate, which is why they’re an indispensable asset for any business. Exploring the Evolving Role of […]




id

Rekomendasi Provider Slot Online Paling Populer

Tidak di pungkiri saat ini permainan slot sudah berkembang pesat, dimana para penggemarnya dapat mainkan slot tersebut secara online. Tidak perlu lagi pergi ke casino untuk mainkan slot ini, cukup menggunakan smartphone atau laptop yang terhubung ke internet sudah dapat bermain sepuasnya. Kelebihan dari permainan slot online ini lebih variatif dengan tema-tema permainan yang berbeda-beda. […]




id

Cocktails with Don Draper, Dinner and Drinks at Oakland’s New Mid-Century Modern, Bardo Lounge and Supper Club

If, like me, you are a fan of all things mid-century modern, then you won’t want to miss Oakland’s newest Lakeshore addition, Bardo Lounge and Supper Club. Like a vintage trip with Don Draper back in time, you’ll enjoy all the little touches that make for a perfect night out for some excellent cocktails along …




id

Why Twitter’s Paid Subscription Model May Be a Smart Move

Boom! And just like that Elon Musk dropped a game changer. After several months of encouraging people to pay $7/month in the form of $84/year, Elon announced yesterday that starting April 15th, only verified Twitter accounts will be eligible to be in the “For You” tab. This was also after he announced that everyone who …




id

Innovative Branding and Visual identity using Google Slides assets

Innovative Branding and Visual identity using Google Slides assets

abduzeedo

Montag School’s branding fuses corporate trust with creative appeal, using Google Slides assets to reach diverse audiences.

Creating a brand identity for an educational institution like Montag School requires balancing the rigorous standards of corporate audiences with the appeal needed to engage a younger, learning-focused crowd. In this project by Monga Design, Montag School’s visual branding comes to life with a thoughtful, dual-purpose approach that reaches across the boundaries of institutional professionalism and educational creativity.

Montag School’s goal was to represent itself as a trustworthy, contemporary leader in personalized education. This meant moving away from conventional, corporate-heavy design toward a more flexible and approachable brand image. The resulting visual identity integrates both institutional authority and a fresh, dynamic appeal, capturing the trustworthiness expected in corporate circles while aligning with the openness and innovation desired in education.

One of the project’s standout qualities is its focus on balance. By addressing both institutional credibility and the youthful appeal needed for online and in-person classes, the branding reinforces Montag’s positioning as a leader in educational innovation. The design combines strong visual cues—such as clean lines and modern typography—with a vibrant color palette, adding depth to both the brand’s academic and professional facets.

Leveraging Google Slides for Visual Consistency

An innovative aspect of this project is the use of Google Slides as a foundational tool for asset creation. This choice reflects an understanding of Montag’s operational needs and the educational landscape’s demands for accessibility and efficiency. By designing custom graphics within Google Slides, Monga Design created a versatile, cost-effective solution for maintaining consistent visuals across various educational materials. Google Slides not only provides easy customization but also aligns with the widespread use of this tool in both corporate and learning environments, allowing Montag to produce branded materials in-house without requiring extensive software training.

Montag School’s branding thoughtfully considers its diverse target audiences. For in-company courses and corporate conventions, the brand maintains a polished, professional tone, ensuring credibility and trust in a business context. Simultaneously, for students attending online and in-person classes, the brand incorporates a more engaging, youthful look. The graphics, colors, and animations appeal to students by creating an approachable and modern learning environment.

Monga Design introduced animations for key assets to add a layer of interactivity to Montag’s branding. These animations, crafted by Clint Studio, enhance the brand’s visual appeal while ensuring they resonate with both young learners and seasoned professionals. This visual dynamism strengthens the brand’s reach by making it adaptable to the changing demands of the educational landscape.

The design team approached this branding project with a detailed, collaborative process. Their “Visual Thermometer” meeting—a strategy to explore visual possibilities rather than set rigid creative guidelines—proved essential for crafting a design that was both client-centered and creative. By aligning client preferences with design expertise, they established a visual identity that resonates on multiple levels, providing a cohesive experience for all audiences.

Montag School’s branding successfully bridges the gap between education and business, providing a clear, attractive, and credible visual identity that aligns with the brand’s values. By balancing a contemporary, accessible aesthetic with the professionalism expected in corporate circles, Montag School positions itself as a modern leader in education, with a visual identity that can grow with its expanding audience.

For more on this project, you can view the video case here.

Branding and visual identity artifacts

Credits

  • Visual identity: Monga Design → Mateus Yuzo and Michel Refatti
  • Motion: Clint Studio → Gustavo Brazzalle, Lucas José Galego e Luciano Burger




id

GitHub x BUCK: Crafting a Dynamic Visual Identity for Universe ’24

GitHub x BUCK: Crafting a Dynamic Visual Identity for Universe ’24

abduzeedo

Learn how BUCK redefined branding and visual identity for GitHub Universe ’24 with monumental design inspired by code.

The annual GitHub Universe event is a celebration of innovation, bringing together some of the brightest minds in software development. This year, GitHub partnered with BUCK, a renowned global creative company, to reimagine the event’s visual identity. Inspired by the theme “The World’s Fair of Software,” BUCK transformed GitHub Universe ’24 into a visually immersive experience that blended the past and future of software culture. Here’s a look at how this collaboration pushed the boundaries of branding and visual identity.

The Creative Vision: Merging Tradition and Progress

GitHub Universe ‘24 marked a milestone as the event’s tenth edition. This special occasion called for a branding overhaul that both paid homage to GitHub’s legacy and celebrated the event’s ongoing evolution. BUCK’s approach was rooted in capturing the spirit of World’s Fairs, where innovation and collaboration take center stage. Ward Graumans, BUCK’s Creative Director, emphasized their intent: “We aimed to create a look that celebrates this milestone while pushing the brand forward.”

The visual system developed by BUCK didn’t just rehash previous designs. Instead, it evolved into a toolkit that incorporated new elements while staying true to GitHub’s core identity. Central to the branding were what BUCK called “Monuments of Progress.” These unique structures were a reinterpretation of their prior 2D shape library, elevated to represent key GitHub values. Each monument carried icons, mascots, and insider references from the developer community, merging playful aesthetics with thoughtful design.

Key Elements of the Visual Identity

BUCK crafted a comprehensive design system that tied together various aspects of GitHub’s event branding. The system integrated fresh color palettes, new typography, and updated logos, all influenced by the visual language of coding. The Monuments of Progress became the standout feature, serving both as iconic standalone pieces and as the basis for hero visuals. This creative concept was not just about aesthetics; it reinforced the event’s narrative, with each visual element acting as a beacon of innovation.

Beyond static design, BUCK brought these monuments to life through animations and dynamic visuals. They created a suite of digital assets, from social media content to an introductory film that illuminated the event stages. This multimedia approach ensured that GitHub Universe ’24 had a cohesive yet lively visual identity, both online and in person.

Collaboration and Execution

The development of this branding system was a collaborative effort between BUCK, GitHub’s in-house design studio, event producers, and external partners. The process involved tight communication and shared creative insights. According to Adam Walden, VP of Brand and Corporate Marketing at GitHub, “BUCK continues to bring taste, craft, story, and incredible attention to detail to everything we do together.” This close-knit collaboration resulted in a unified event experience that resonated across different platforms.

The team at BUCK didn’t just stop at creating a one-off design for the event. Instead, they developed a branding system with longevity, allowing GitHub to use these assets beyond Universe ’24. This evergreen toolkit ensures a lasting impact on GitHub’s branding efforts, providing flexibility for future campaigns and event rollouts.

Impact and Legacy

GitHub Universe ’24’s branding is more than a visual facelift; it’s an invitation to engage and explore. By drawing from coding elements and honoring the developer community, BUCK and GitHub have created a design system that feels both cutting-edge and familiar. The Monuments of Progress symbolize GitHub’s role as a hub of innovation, while the refined color schemes and typography elevate the brand’s visual language.

This collaboration sets a new standard for event branding in the tech industry. BUCK’s creative solutions not only reflect GitHub’s ethos but also celebrate the people and projects that make the developer ecosystem thrive. It’s a testament to the power of thoughtful design and the impact of a strong, cohesive visual identity.

The reimagined visual identity for GitHub Universe ’24 exemplifies how branding can serve as a narrative tool. BUCK’s designs invite viewers to think of software development not just as code, but as a world full of creativity and progress. As GitHub continues to grow, this branding system will be a cornerstone of its visual storytelling, inspiring developers and designers alike.

GitHub Universe ’24, with its bold and vibrant identity, proves that a well-crafted brand can amplify the spirit of an event. BUCK’s collaboration with GitHub has set a high bar, showing how design, when rooted in community and culture, can make an event feel like a true celebration of innovation.

Branding and visual identity artifacts

About GitHub

GitHub is the most widely adopted Copilot-powered developer platform to build, scale, and deliver secure software. Over 100 million developers, including more than 90% of the Fortune 100 companies, use GitHub to collaborate and more than 77,000 organizations have adopted GitHub Copilot.

About BUCK

BUCK is a global creative company that combines design, technology, and storytelling to create compelling experiences for brands. Founded in 2004, BUCK has built a reputation for outstanding craftsmanship and innovation through collaboration with a wide range of clients across the cultural and technology spheres, including Nike, Apple, Netflix, IBM, Airbnb, and Google. Recognized as an industry leader, BUCK’s trophy case includes two Emmys, multiple gold Cannes Lions, Clios, pencils, cubes, and over 200 other awards from the most prestigious competitions in the world.

BUCK is in Residence, a collective of beautifully curated companies with the shared goal of empowering creative potential.




id

Graphic Hunters: Pushing the Boundaries of Sports Visual Identity

Graphic Hunters: Pushing the Boundaries of Sports Visual Identity

abduzeedo

Explore how Graphic Hunters’ visual identity redefines sports branding through innovative design inspired by fashion and art.

Graphic Hunters, a Dutch studio dedicated to sports branding, isn’t playing by the typical design rulebook. Instead, their newly crafted visual identity steps outside the confines of traditional sports aesthetics, introducing elements drawn from fashion and high design. The result is a high-impact, versatile identity that positions Graphic Hunters as a creative club worth joining—whether as a client or a collaborator.

A New Playbook for Sports Branding

At the heart of Graphic Hunters’ approach is the idea that the sports industry deserves a more refined and exclusive visual experience. This belief is woven into every part of their branding, which Monga Design and Vogau led with a clear vision. The goal was to create a system that balances functionality with creative exploration, breaking conventions while still delivering practical, adaptable solutions for various applications.

This innovative take on visual identity isn’t just about aesthetics; it’s a strategy aimed at redefining the brand’s place in the market. Graphic Hunters has always described itself as a team hungry for new challenges, and now, their brand identity reflects that spirit. The new look aims to make the studio stand out in the sports arena and beyond, appealing to clients and team members who value originality and impact.

Graphic Hunters’ identity combines familiar elements from the sports world—like motion and heat—with unexpected treatments. The design team drew inspiration from fashion and abstract art to create a visual language that transcends typical sports branding. This cross-pollination of ideas manifests in several core elements:

1. Typographic Experimentation: Instead of relying on traditional sports typefaces, the team played with a variety of fonts that feel bold and contemporary. Typography serves as both structure and disruption, bringing energy to each layout.

2. Photographic Treatments: The identity includes photographs that have been creatively manipulated, breaking up the grid and adding an element of surprise. This technique turns static images into dynamic design features, echoing the constant motion of sports.

3. Grid System and Stickers: To keep the brand’s applications cohesive yet flexible, a structured grid underpins the design. However, this is cleverly offset by playful elements like stickers and graphical interventions, which keep the brand feeling fresh and exciting.

One of the biggest challenges was making the visual system adaptable yet creatively open. Sports branding often leans into themes of power and motion, but Graphic Hunters wanted to do more. The result is a brand that’s equally at home on a team jersey or a digital campaign, seamlessly moving between refined, impactful moments and bold, playful expressions. This adaptability speaks to the studio’s ethos of being a “creative club,” where everyone is encouraged to push the boundaries.

Another essential aspect was research. The design team explored references beyond the sports realm, looking at high fashion and experimental graphic design. This broader inspiration palette allowed Graphic Hunters to create something genuinely unique for the industry. The identity’s experimental typography and abstract motifs capture the feeling of heat and energy—core elements of sports—while grounding them in a sophisticated design language.

Elevating Sports Design Beyond the Field

By combining these unexpected references with a strong foundation of sports elements, Graphic Hunters has crafted a visual identity that is both striking and functional. It stands as a testament to the idea that sports design can be more than bold fonts and action shots. It can be a narrative of innovation and exclusivity, appealing to an audience that appreciates both the adrenaline of sports and the sophistication of high design.

Graphic Hunters’ reimagined branding proves that sports-focused design can be just as experimental and refined as any high-fashion brand. It’s a visual identity that elevates the sports studio into a space where design meets performance, art meets action, and innovation becomes the new norm. As the brand continues to grow, this identity will serve as a powerful statement of their ambition: to bring high-impact, original design to the world of sports, one project at a time.

Branding and visual identity artifacts

Credits

  • Authors: Monga DesignVogau and Clint Studio
  • Visual identity: Monga Design (Mateus Yuzo, Michel Refatti) and Vogau (Carlos Eduardo Marin, Gabriela Colebrusco Peres)
  • Motion: Clint Studio (Bruno Vitalino, Danilo Coelho, Gustavo Brazzalle, Lucas José Galego, Luciano Burger




id

Explore ChainGPT Labs’ Web3 Brand Identity & Web Design

Explore ChainGPT Labs’ Web3 Brand Identity & Web Design

abduzeedo

Discover ChainGPT Labs’ unique Web3 branding and web design with seamless 3D animations and a modern interface.

ChainGPT Labs stands as an ambitious venture, propelling innovation in the blockchain and Web3 startup world. A project backed by the ChainGPT team, this platform provides strategic funding, incubation, and acceleration services tailored for the Web3 ecosystem. To visually represent such a forward-thinking initiative, a distinctive and cohesive brand identity was crucial.

The design challenge was clear: introduce ChainGPT Labs as a part of the existing ChainGPT ecosystem while ensuring it had its unique presence. The team behind this creative endeavor adopted a strategy that balanced modernity with a recognizable brand connection.

Typeface Selection and Visual Cohesion

One of the design cornerstones is the typographic identity. The chosen typeface blends sleek, experimental, and monospace styles, reminiscent of sci-fi aesthetics yet grounded enough to maintain clarity. This combination brings a futuristic yet approachable vibe, mirroring ChainGPT Labs’ mission of bridging advanced technology with user-friendly design.

The website, crafted with a focus on interaction, features seamless 3D animations. These animations not only add depth but also engage users in an immersive digital experience. The modern, functional interface ensures smooth navigation while highlighting essential content. The design isn’t just about aesthetics; it delivers on usability, ensuring every visual element contributes to a cohesive narrative.

3D Animations: Bringing Ideas to Life

3D animation plays a pivotal role in elevating the digital experience. Each animation is thoughtfully integrated, making the browsing experience lively without compromising performance. These elements align with Web3’s ethos, suggesting a digital landscape that’s both dynamic and innovative.

Balancing Innovation and Brand Familiarity

Designers also needed to ensure that ChainGPT Labs felt like an extension of ChainGPT’s established identity. The visual ecosystem leans into bold aesthetics while subtly referencing familiar brand cues. Strategic use of color, shape, and layout ties the Labs’ identity back to its origins, achieving a harmonious balance between innovation and brand recognition.

Why It Matters for Design Enthusiasts

For graphic and interface designers, ChainGPT Labs offers an inspiring case study in brand expansion. The project exemplifies how visual elements can maintain brand consistency while pushing creative boundaries. This thoughtful integration of typography, 3D animation, and a user-focused interface marks a new chapter for digital design in the Web3 space.

For a full breakdown of the design elements, visit the work of Sigma Software Design at https://sigmasoftware.design/.

Visit the website at labs.chaingpt.org

Web design artifacts