DNREC will hold a community information session on Tuesday, Sept. 24 to discuss the upcoming dredging and beach and dune replenishment project on the north side of the Indian River inlet. The session will run from 5 to 7:30 p.m. at Bethany Beach Town Hall at 214 Garfield Parkway, and the public can stop by at any time to join the conversation about the north side of the inlet.

DNREC encourages nonprofit groups, conservation districts, community organizations and homeowners’ associations to submit project proposals to be considered for matching grant funds from DNREC’s Community Water Quality Improvement Grants program. Funding for grant award projects in this cycle is expected to range from $25,000 to $75,000

A series of community engagement sessions in late October is planned to gather input on updating the state’s Climate Action Plan.

  Wilmington Based Non-Profit, Four Youth, Awarded Funding   Statewide, DEL. (October 2, 2024) – The National Endowment for the Arts (NEA) is pleased to announce 112 organizations recommended for awards under ArtsHERE—a new pilot program in partnership with South Arts and in collaboration with the other five U.S. Regional Arts Organizations—designed to expand access […]

Additionally, Workplace Safety Program eligibility changes will help more companies stay safe and save money Insurance Commissioner Trinidad Navarro announced today that workers’ compensation insurance rates will decrease for the eighth year in a row, effective December 1. The voluntary market is expected to decrease average loss costs by 8.4%, and the residual market will […]

Attorney General Kathy Jennings‘ Fraud and Consumer Protection Division has issued an open letter to Delaware landlords regarding commonly seen illegal lease provisions in residential leases. The letter puts landlords on notice that their residential leases must comply with Delaware’s Residential Landlord/Tenant Code. Attorney General Jennings stated: “Landlords have tremendous power over their tenants. The […]

Following the successful completion of the application review, we are pleased to announce that 727 applications will advance to the lottery stage and will include all categories except the Open Retail category, for which we plan to have a separate lottery in December. The Licensing Lottery will be broadcast live on Facebook Live on October […]

Dover, DE – On October 24, 2024, the Office of the Marijuana Commissioner (OMC) held a public license lottery to determine the selection of applicants across several categories, including cultivation, manufacturing, retail, and testing, for Delaware’s regulated marijuana industry. This lottery marks a critical milestone in ensuring a fair and transparent licensing process, providing equal […]

DOVER, Del. (October 28, 2024)—The Delaware Forest Service is offering $910K in funding for local communities through four grants launching on November 1, 2024. While the application period for the Inflation Reduction Act (IRA) Sub-Grant for Disadvantaged Communities is already open, three more grants will become available. Delaware Forest Service’s Urban & Community Forestry Coordinator […]

DEPARTMENT OF JUSTICE: Fraud and Consumer Protection Division

DEPARTMENT OF EDUCATION: Office of the Secretary

DEPARTMENT OF SAFETY AND HOMELAND SECURITY: Office of the Marijuana Commissioner

DEPARTMENT OF EDUCATION: Professional Standards Board

Noted Kannada actor and director Guruprasad was found dead in his Bengaluru apartment today, the police said.

A political controversy has broken out over an alleged racist remark by Karnataka Minister BZ Zameer Ahmed Khan against Union Minister and JD(S) leader HD Kumaraswamy.

Karnataka Minister BZ Zameer Ahmed Khan tendered an apology on Tuesday for referring to Union Minister and JD(S) leader HD Kumaraswamy as "Kaalia", which the NDA had slammed as a "racist" slur.

The city of Heidelberg, Germany is known for its romantic cityscape, which attracts tourists from all over the world. It also has the youngest population in Germany, thanks largely to the many students at one of Europe's oldest and largest universities. Perhaps less well known is that Heidelberg is twinned [...]

The post Smart City Heidelberg: SAS Hackathon complements city's digital transformation journey appeared first on Government Data Connection.

Government employees charged with monitoring environmental compliance face a downpour of information, wading through countless reports and stacks of paperwork to accomplish their mission. To help these dedicated public servants increase productivity, agencies should consider a broader set of tools to control pollution, enforce regulations and improve compliance. Although foundational [...]

The post Time for government agencies to embed data and AI into environmental compliance appeared first on Government Data Connection.

M6 Financial Forecasting Competition The Makridakis Open Forecasting Center has announced the M6 Financial Forecasting Competition, to begin in February 2022. This will be a "live" competition running through February 2023, with a focus on forecasts of stock price (returns) and risk, and on investment decisions based on the forecasts. [...]

The post M6 Financial Forecasting Competition announced appeared first on The Business Forecasting Deal.

US President-elect Donald Trump has named Mike Waltz, a Congressman from Florida and co-chair of the India Caucus, as the new National Security Adviser.

1. Battered Reliance Shares To Make A Comeback? This Analyst Sees 29% Upside Ahead  Benzinga India
2. Reliance Industries shares may see 30% upside according to CLSA, who cites this key trigger  CNBCTV18
3. RIL shares are down 20% from record high, oversold on charts; here's what analysts say  Business Today
4. Six of India’s top 10 most valuable firms shed Rs 1.55 lakh crore in market value  Moneycontrol
5. Reliance Industries Share Price Today on 13-11-2024: Reliance Industries share price are down by -0.63%, Nifty down by -0.8%  Mint

1. 26 die as bus plunges into Indus in Diamer  DAWN.com
2. 14 Dead As Bus With Wedding Guests Falls Into River In Pak, Bride Survives  NDTV
3. A bus carrying wedding guests falls into a river in northern Pakistan, killing 18  The Times of India
4. Tragic Gilgit-Baltistan Bus Accident Claims 26 Lives During Wedding Journey  Oneindia
5. 14 Drown, 12 Missing In Pakistan After Bus Plunges Into River In PoK's Gilgit-Baltistan  News18

1. Delhi: India's capital chokes as air pollution turns 'severe'  BBC.com
2. Several flights diverted due to low visibility conditions at Delhi airport  The Times of India
3. Delhi's toxic air: Why you should not take your cough lightly  India Today
4. Delhi air pollution: Visibility near-zero amid thick smog; CPCB says AQI 'very poor', IQAir shows 'hazardous' | Details  Hindustan Times
5. Delhi's IGI airport sees flight diversions as season's first dense fog hits national capital  Moneycontrol

The ASUS ROG Phone 9 has recently been spotted on Geekbench where it appears to be powered by the new Qualcomm chipset.

The post ASUS ROG Phone 9 spotted on Geekbench with Qualcomm’s latest chipset appeared first on Phandroid.

Atlas Biomed's website is no longer active and the phone number listed is dead as well.

Zomato witnesses approximately 400,000 cancelled orders monthly which prompted it to launch the initiative.

US-based comedian Austin Nasso is going viral online for his hilarious impersonation of US-President-elect Donald Trump during a fictional visit to India.

Microsoft announced it has acquired Semantic Machines, a conversational AI startup providing chatbots and AI chat apps founded in 2014 having $20.9 million in funding from investors. The acquisition will help Microsoft catch up with Amazon Alexa, though the latter is more focused on enabling consumer applications of conversational AI.

Microsoft will use Semantic Machine’s acquisition to establish a conversational AI center of excellence in Berkeley to help it innovate in natural language interfaces.

Microsoft has been stepping up its products in conversational AI. It launched the digital assistant Cortana in 2015, as well as social chatbots like XiaoIce. The latest acquisition can help Microsoft beef up its ‘enterprise AI’ offerings.

As the use of NLP (natural language processing) increases in IoT products and services, more startups are getting traction from investors and established players. In June last year, Josh.ai, avoice-controlled home automation software has raised $8M.

Followed by it was SparkCognition that raised $32.5M Series B for its NLP-based threat intelligence platform.

It appears Microsoft’s acquisition of Semantic Machines was motivated by the latter’s strong AI team. The team includes technology entrepreneur Daniel Roth who sold his previous startups Voice Signal Technologies and Shaser BioScience for $300M and $100M respectively. Other team members include Stanford AI Professor Percy Liang, developer of Google Assistant Core AI technology and former Apple chief speech scientist Larry Gillick.

Siemens Building Technologies division announced it will acquire Enlighted Inc., a smart IoT building technology provider. The transaction is expected to close in Q3’18.

Enlighted Inc.’s core element is an advanced lighting control application. It is based on a patented, software-defined smart sensor that collects and monitors real-time occupancy, light levels, temperatures and energy usage.

The sensor can gauge temperature, light level, motion, energy, and has Bluetooth connectivity.

The Enlighted system works by collecting temperature, light and motion data via its smart sensors. A gateway device carries the information to Energy Manager, a secure browser-based interface to create profiles and adjust settings of the entire Enlighted Advanced Lighting Control System. The Energy manager operates as an analytics device.

The whole system consists of multi-function sensors, distributed computing, a network, and software applications run by Enlighted Inc.

Enlighted Inc.’s main target market is commercial real estate. Key use cases of its intelligent Lighting Control System are energy efficiency, controlling heating, ventilation and air conditioning, and building utilization reports.

Use the Postscapes 'Connected Products Framework' to understand the smart home and buildings eco-system.

Smart Lock Company LockState raised $5.8M Series A in new investment to fund its aggressive sales and marketing and partner development plan. The company previously raised $740K seed round and $1M in a round led by angel investors. The lead investor in latest round was Iron Gate Capital. Other investors include Kozo Keikaku Engineering Inc, Nelnet and Service Provider Capital.

The company’s Wi-Fi-enabled RemoteLock is used by 1000s of Airbnb and other vacation rental hosts. It helps hosts remotely provide access to guests. Locking/unlocking codes can be generated via a host’s computer or smartphone.

RemoteLock’s prices start at $299 which is its algorithmic ResortLock. The most pricey lock by LockState is its ‘RemoteLock 7i Black WiFi Commercial Smart Lock’ which costs $479.

Another core product of LockState is its cloud-based remote access platform for internet-enabled locks. It implies users can remotely manage their (internet-enabled) locks via LockState’s cloud platform.

Unlike smartphones and watches, customers don’t look forward to upgrading their smart locks or buying one when new models are launched. Thus, smart lock companies offset this disadvantage by partnering with property management and short-term rental companies to get new customers.

LockState has partnered with vacation rental brands like Airbnb, HomeAway, and other listing partners to automate guest access.

Igloohome a Singapore-based smart lock company also raised an investment of $4M in April this year.

[SAPS] - A former company Director (57) is expected to appear in the Thabamoopo Magistrates Court in Lebowakgomo on 11 November 2024 for allegedly defrauding a pensioner an amount of R378 000.00 in the name of business.

[Namibian] Russian company Rosatom and South African AllWeld Nuclear and Industrial are joining forces to promote the sustainable development of nuclear energy in Africa.

[COSATU] The Congress of South African Trade Unions (COSATU) welcomes the slight drop in the expanded unemployment rate from 42.6% in the second quarter to 41.9% in the third quarter of this year.

PCI-SIG DevCon 2024 – 32^nd Anniversary

For more than a decade, Cadence has been well-known in the industry for its strong commitment and support for PCIe technology. We recognize the importance of ensuring a robust PCIe ecosystem and appreciate the leadership PCI-SIG provides. To honor the 32^nd anniversary of the PCI-SIG Developer’s Conference, Cadence is announcing a complete PCIe 7.0 IP solution for HPC/AI markets.

Why Are Standards Like PCIe So Important?

From the simplest building blocks like GPIOs to the most advanced high-speed interfaces, IP subsystems are the lifeblood of the chipmaking ecosystem. A key enabler for IP has been the collaboration between industry and academia in the creation of standards and protocols for interfaces. PCI-SIG drives some of the key definitions and compliance specifications and ensures the interoperability of interface IP.

HPC/AI markets continue to demand high throughput, low latency, and power efficiency. This is fueling technology advancements, ensuring the sustainability of PCIe technology for generations to come. As a close PCI-SIG member, we gain valuable early insights into the evolving specs and the latest compliance standards. PCIe 7.0 specifications and beyond will enable the market to scale, and we look forward to helping our customers build best-in-class cutting-edge SoCs using Cadence IP solutions.

Figure 1. Evolution of PCIe Data Rates (source PCI-SIG)

What’s New This Year at DevCon?

At DevCon ’24, the PCIe 7.0 standard will take center stage, and Cadence is showing off a full suite of IP subsystem solutions for PCIe 7.0 this year.

What Sets Cadence Apart?

At Cadence, we believe in building a full subsystem for our testchips with eight lanes of PHY along with a full 8-lane controller. Adding a controller to our testchip significantly increases the efficiency and granularity in characterization and stress testing and enables us to demonstrate interoperability with real-world systems. We are also able to test the entire protocol stack as an 8-lane solution that encompasses many of the applications our customers use in practice. This approach significantly reduces the risks in our customers’ SoC designs.

Figure 2: Piper - Cadence PHY IP for PCIe 7.0

Figure 3: Industry’s first IP subsystem for PCIe 7.0

Which Market Is This For?

At a time when accelerated computing has gone mainstream, PCIe links are going to take on a role of higher importance in systems. Direct GPU-to-GPU communication is crucial for scaling out complex computational tasks across multiple graphics processing units (GPUs) or accelerators within servers or computing pods. There is a growing recognition within the industry of a need for scalable, open architecture in high-performance computing. As AI and data-intensive applications evolve, the demand for such technologies will likely increase, positioning PCIe 7.0 as a critical component in the next generation of interface IP.

Here's a recent article describing a potential use case for PCIe 7.0.

Figure 4: Example use case for PCIe 7.0

Why Are Optical Links Important?

It takes multiple buildings of data centers to train AI/ML models today. These buildings are increasingly being distributed across geographies, requiring optical fiber networks that are great at handling the increased bandwidth over long distances. However, these optical modules soon hit a power wall where all the budgeted power is used to drive the signal from point A to point B, and there is not enough power left to run the actual CPUs and GPUs. Such scenarios create a need for non-retimed, linear topologies. Linear Pluggable Optics (LPO) links can significantly reduce module power consumption and latency when compared to traditional Digital Signal Processing (DSP) based retimed optical solutions, which is critical for accelerating AI performance. Swapping from DSP-based solutions to LPO results in significant cost savings that help drive down expenditure due to lower power and cooling requirements, but this requires a robust high-performance ASIC to drive the optics rather than retimers/DSP.

To showcase the robustness of Cadence IP, we have demonstrated that our subsystem testchip board for PCIe 7.0 can successfully transmit and receive 128GT/s signals through a non-retimed opto-electrical link configured in an external loopback mode with multiple orders of margin to spare.

Figure 5: Example of ASIC driving linear optics

Compliance Is Key

For PCIe 6.0, the official compliance program has not started yet; this is typical for the SIG where the official compliance follows a few years after the spec is ratified to give enough time for the ecosystem to have initial products ready, and for test and equipment vendors to get their hardware/software up and running. At this time, PCIe Gen6 implementations can only be officially certified up to PCIe 5.0 level (the highest official compliance test suite that the SIG supports). We have taken our PCIe 6.0 IP subsystem solution to the SIG for multiple process nodes, and they are all listed as compliant. You can run this query on the pcisig.com website under the Developers->Integrators list by making the following selections:

Due to space limitations, not all combinations could be tested at the May workshop (e.g., N3 root port) – this will be tested in the next workshop.

Also, the SIG just held an “FYI” compliance event this week to bring together the ecosystem for confidential testing (no results were reported, and data cannot be shared outside without violating the PCI-SIG NDA). We participated in the event with multiple systems and can report that our systems have done quite well. The test ecosystem is not mature yet, and a few more FYI workshops will be conducted before the official compliance for 6.0 is launched. We have collaborated with all the key test vendors for electrical and protocol testing throughout the year. As early as the middle of last year, we were able to provide test cards to all these vendors to demo PCIe 6.0 capabilities in their booths at various events. Many of them recorded these videos, and they can be found online.

• Cadence Subsystem IP for PCIe 6.0: Protocol and Electrical Testing
• Cadence Subsystem IP for CXL Protocol Test Demo
• Cadence Subsystem IP for CXL2.0/3.0 Protocol Test Demo
• Cadence Subsystem IP for PCIe 6.0: Protocol Stack Demo

More at the PCI-SIG Developers Conference

Check us out at the PCI-SIG Developer’s conference on June 12 and 13 to see the following demonstrations:

• Robust performance of Cadence IP for PCIe 7.0 transmitting and receiving 128GT/s signals over non-retimed optics
• Capabilities of Cadence IP for PCIe 7.0 measured using oscilloscope instrumentation detailing its stable electrical performance and margin
• The reliability of Cadence IP for PCIe 6.0 interface using Test Equipment to characterize the PHY receiver quality
• A PCI-SIG-compliant Cadence IP subsystem for PCIe 6.0 optimized for both power and performance

As a leader in PCI Express, Anish Mathew of Cadence will share his valuable insights on an important topic: “Impact of UIO ECN on PCIe Controller Design and Performance,” highlighting the strides made by the Cadence design team in achieving this implementation.

Figure 6: Cadence UIO Implementation Summary

Summary

Cadence showcased PCIe 7.0-ready IP at PCI-SIG Developers Conference 2023 and continues to lead in PCIe IP development, offering complete solutions in advanced nodes for PCIe 7.0 that will be generally available early next year. With a full suite of solutions encompassing PHYs, Controllers, Software, and Verification IP, Cadence is proud to be a member of the PCI-SIG community and is heavily invested in PCIe. Cadence was the first IP provider to bring complete subsystem solutions for PCIe 3.0, 4.0, 5.0, and 6.0 with industry-leading PPA and we are proud to continue this trend with our latest IP subsystem solution for PCIe 7.0, which sets new benchmarks for power, performance, area, and time to market.

Hi everyone. 

I'm very a new cadence user. I'm not good at using it and quite lost in finding a way to get the results. With the topic, I would like to ask you for some suggestions to improve my cadence skills.

I have some digital decision logic. Some are combinational logic, some are sequential logic that I would like to import or generate random input combination to the inputs of my decision logic to get the maximum, minimum, and average delay power dissipation and area when feeding the different input combination.

My logic has 8-bit, 16-bit, and 32-bit input. The imported data tends to be decimal numbers.

I would like to ask you:

- which tool(s) are the most appropriate to import and feed the different combination to my decision logic?

- which tool is the most appropriate to synthesis with different number of input? - I have used Genus Synthesis Solution so far. However with my skill right now I can only let Genus synthesize my Verilog code one setup at a time. I'm not sure if I there is anyway I can feed a lot of input at a time and get those results (min, max, average of delay, power dissipation and area)

- which language or scripts I should pick up to use and achieve these results?

-where can I find information to solve my problem? which information shall I look for?

Thank you so much for your time!!

Best Regards

Is there a skill command for "Assign Layout Instance terminals", this form appears when i click on define device correspondence and Bind the devices.

Also,

Problem Statement : i have a schematic with a couple of transistor symbols and and i alos have a corresponding layout view with respective layout transistors but they all are inside a pCell(created by me) i.e layout transistor called inside a custom Pcell. Now i have multiple symbols in schematic view and a single instance(pCell) in layout view. 
Is there a way how i can bind these schematic symbols with layout symbols inside the pCell(custom)? Even if i have to use cph commands i'm fine with it. need help here.

The idea here is to establish XL connectivity between the schematic symbols and corresponding layout transistors(inside the pCell).

Thanks,

Shankar

When starting a new design, it's important to take the time to consider design recommendations that prevent problems that can arise later in the design cycle. This two-part compilation of guidelines for starting a new design is the result of years of Cadence AWR Design Environment platform Support experience with designs. Pre-design decisions for user interface, simulation, layout, and library configuration lay the groundwork for a successful and efficient AWR design. This blog, part 2, covers the layout and component library considerations designers should note prior to starting a design.(read more)

A training webinar on Microwave Office will be given June 27, 2023. The emphasis will be on EM simulation.(read more)

Hello,

I am trying to load some of the signals of the design saved in the signals.svwf to the waveform windown via the tcl file, I am using the following commands but nothing works, Can you please help 

 -submit waveform loadsignals -using "Waveform 2" FB1.svwf but it gives me the below error

-submit waveform new -reuse -name Waveforms

hi

How can I tell the LEC tool to ignore a combination of Primary input bus in both Golden and revised.

For example in both Golden and revised there is 

input [3:0] data_in

I want LEC not to check the case that data_in[3:0] == 4'b1000

To stay ahead in competition in chip design real-time collaborations ensure traceability, speedy innovations at reduced the cost.(read more)

Community engagement is a dynamic concept that does not adhere to a singular, universal approach. Its various forms, methods, and objectives can vary significantly depending on the specific context, goals, and desired outcomes. Whether you seek assis...(read more)

Power network design and analysis of 3D-ICs is a major challenge due to the complex nature and large size of the power network. In addition, designers must deal with the complexity of routing power through the interposer, multiple dies, through-silicon vias (TSVs), and through-dielectric vias (TDVs).
Cadence’s Integrity 3D-IC Platform and Voltus IC Power Integrity Solution provide a fully integrated solution for early planning and analysis of 3D-IC power networks, 3D-IC chip-centric power integrity signoff, and hierarchical methods that significantly improve capacity and performance of power integrity (PI) signoff while maintaining a very high level of accuracy at signoff. This blog summarizes the typical design challenges faced by today’s 3D-IC designers, as discussed in our recent webinar, “Addressing 3D-IC Power Integrity Design Challenges.” Please click here to view the full webinar.

Major Trends in Advanced Chip Design

From chips to chiplets, stacked die, 3D-ICs, and more, three major trends are impacting advanced semiconductor packaging design. The first is heterogenous integration, which we define as a disaggregated approach to designing systems on chip (SoCs) from multiple chiplets. This approach is similar to system-in-package (SiP) design, except that instead of integrating multiple bare die – including 3D stacking – on a single substrate, multiple IPs are integrated in the form of chiplets on a single substrate.

The second major trend is around new silicon manufacturing techniques that leverage silicon vias (TSVs) and high-density fanout RDL. These advancements mean that silicon is becoming a more attractive material for packaging, especially when high bandwidth and form factor become key attributes in the end design. This brings new design and verification challenges to most packaging engineers who typically work with organic and ceramic substrate materials.

Finally, on the ecosystem side, all the large semiconductor foundries now offer their own versions of advanced packaging. This brings new ways of supporting design teams with technologies like reference flows and PDKs, concepts that have typically been lacking in the packaging community. Cadence has worked with many of the leading foundries and outsourced semiconductor assembly and test facilities (OSATs) to develop multi-chip(let) packaging reference flows and package assembly design kits. The downside is that, with the time restrictions designers are under today, there isn’t enough time to simulate the details of these flows and PDKs further.

For those who must make the best electro/thermal/physical decisions to achieve the best power/performance/area/cost (PPAC), factors can include accurate die size estimations, thermal feasibility, die-to-die interconnect planning, interposer planning (silicon/organic), front-to-front and front-to-back (F2F/F2B) planning, layer stack and electromigration/ IR drop (EMIR)/TSV planning, IO bandwidth feasibility, and system-level architecture selection.

3D-IC Power Network Design and Analysis

The key to success in 3D-IC design is early power integrity planning and analysis. Cadence’s Integrity 3D-IC platform is a high-capacity 3D-IC platform that enables 3D design planning, implementation, and system analysis in a single, unified cockpit. Cadence’s Voltus IC Power Integrity Solution is a comprehensive full chip electromigration, IR drop, and power analysis solution. With its fully distributed architecture and hierarchical analysis capabilities, Voltus provides very fast analysis and has the capacity to handle the largest designs in the industry. Typically, 3D-IC PDN design and analysis is performed in four phases, as shown in Figure 1.

Phase 1 - Perform early power delivery network (PDN) exploration with each fabric’s PDN cascaded in system PI with early circuit models.

Phase 2 – Plan 3D-IC PDNs in Cadence’s Integrity 3D-IC platform, including micro bumps, TSVs, and through dielectric vias (TDVs), power grid synthesis for dies, and early rail analysis and optimization.

Phase 3 – Perform full chip-centric signoff in Voltus with detailed die, interposer, and package models, including chip die models, while keeping some dies flat.

Phase 4 – Perform full system-level signoff with Cadence’s Sigrity SystemPI using detailed extracted package models from Sigrity XtractIM, board models from Sigrity PowerSI or Clarity 3D Solver, interposer models from XtractIM or Voltus, and chip power models from Voltus.

Figure 1. 3D-IC PDN design and analysis phases

3D-IC Chip-Centric Signoff

The integration of Integrity 3D-IC and Voltus enables chip-centric early analysis and signoff. Figure 2 and Figure 3 highlight the chip centric early PI optimization and signoff flows. In early analysis, the on-chip power networks are synthesized, and the micro bumps and TSVs can be placed and optimized. In the signoff stage, all the detailed design data is used for power analysis, and detailed models are extracted and used for package, interposer, and on-die power networks.

Figure 2. Early chip-centric PI analysis and optimization flow

Figure 3. Chip-centric 3D-IC PI signoff

Hierarchical 3D-IC PI Analysis

To improve the capacity and performance of 3D-IC PI analysis, Voltus enables hierarchical analysis using chiplet models. Chiplet models can be reduced chip models in spice format or more accurate xPGV models which are highly accurate proprietary models generated by Voltus. With xPGV models, the hierarchical PI analysis has almost the same accuracy as flat analysis but offers 10X or higher benefit in runtime and memory requirements.

Conclusion

This blog has highlighted the major design trends enabled by advanced 3D packaging and the design challenges arising from these advancements. The design of power delivery networks is one of these major challenges. We have discussed Cadence solutions to overcome this PI challenge. To learn more, view our recent webinar, "Addressing 3D-IC Power Integrity Design Challenges" and visit the Voltus web page.

Melika Roshandell, Cadence product marketing director for the Celsius Thermal Solver, recently published an article in Designing Electronics discussing how the use of modern thermal analysis techniques can help engineers meet the challenges of today’s complex electronic designs, which require ever more functionality and performance to meet consumer demand.

Today’s modern electronic designs require ever more functionality and performance to meet consumer demand. These requirements make scaling traditional, flat, 2D-ICs very challenging. With the recent introduction of 3D-ICs into the electronic design industry, IC vendors need to optimize the performance and cost of their devices while also taking advantage of the ability to combine heterogeneous technologies and nodes into a single package. While this greatly advances IC technology, 3D-IC design brings about its own unique challenges and complexities, a major one of which is thermal management.

To overcome thermal management issues, a thermal solution that can handle the complexity of the entire design efficiently and without any simplification is necessary. However, because of the nature of 3D-ICs, the typical point tool approach that dissects the design space into subsections cannot adequately address this need. This approach also creates a longer turnaround time, which can impact critical decision-making to optimize design performance. A more effective solution is to utilize a solver that not only can import the entire package, PCB, and chiplets but also offers high performance to run the entire analysis in a timely manner.

Celsius Thermal Management Solutions

Cadence offers the Celsius Thermal Solver, a unique technology integrated with both IC and package design tools such as the Cadence Innovus Implementation System, Allegro PCB Designer, and Voltus IC Power Integrity Solution. The Celsius Thermal Solver is the first complete electrothermal co-simulation solution for the full hierarchy of electronic systems from ICs to physical enclosures. Based on a production-proven, massively parallel architecture, the Celsius Thermal Solver also provides end-to-end capabilities for both in-design and signoff methodologies and delivers up to 10X faster performance than legacy solutions without sacrificing accuracy.

By combining finite element analysis (FEA) for solid structures with computational fluid dynamics (CFD) for fluids (both liquid and gas, as well as airflow), designers can perform complete system analysis in a single tool. For PCB and IC packaging, engineering teams can combine electrical and thermal analysis and simulate the flow of both current and heat for a more accurate system-level thermal simulation than can be achieved using legacy tools. In addition, both static (steady-state) and dynamic (transient) electrical-thermal co-simulations can be performed based on the actual flow of electrical power in advanced 3D structures, providing visibility into real-world system behavior.

Designers are already co-simulating the Celsius Thermal Solver with Celsius EC Solver (formerly Future Facilities’ 6SigmaET electronics thermal simulation software), which provides state-of-the-art intelligence, automation, and accuracy. The combined workflow that ties Celsius FEA thermal analysis with Celsius EC Solver CFD results in even higher-accuracy models of electronics equipment, allowing engineers to test their designs through thermal simulations and mitigate thermal design risks.

Conclusion

As systems become more densely populated with heat-dissipating electronics, the operating temperatures of those devices impact reliability (device lifetime) and performance. Thermal analysis gives designers an understanding of device operating temperatures related to power dissipation, and that temperature information can be introduced into an electrothermal model to predict the impact on device performance. The robust capabilities in modern thermal management software enable new system analyses and design insights. This empowers electrical design teams to detect and mitigate thermal issues early in the design process—reducing electronic system development iterations and costs and shortening time to market.

To learn more about Cadence thermal analysis products, visit the Celsius Thermal Solver product page and download the Cadence Multiphysics Systems Analysis Product Portfolio.

Starting SPB 23.1, in Allegro X PCB Editor and Allegro X Advanced Package Designer, you can align components by using offset mode. Earlier only spacing mode was available.

Follow these steps to Align Components using Offset Mode:

1. Set Application Mode to Placement Edit.
2. Drag the components that need to be aligned and right-click and choose Align Components.
3. Now, in the Options tab, you will notice Spacing Section with Equal Offset. You can equally and individually offset the components by using the +/- buttons for increment or decrement.

Have you ever encountered ERROR(SPMHNI-67) while importing logic? If yes, you might already know that you had to export libraries of the design and make sure that paths (devpath, padpath, and psmpath) include the location of exported files.  

Starting in SPB23.1, if you go to File > Import > Logic/Netlist and click on the Other tab, you will see an option, Reuse device files for existing components. 

After selecting this option, ERROR(SPMHNI-67) will no longer be there in the log file, because the tool will automatically extract device files and seamlessly use them for newly imported data. In other words, SPB_23.1 lets you reuse the device / component definitions already in the design without first having to dump libraries manually. An excellent improvement, don’t you think?  

Starting SPB 23.1, Allegro X APD lets you import/export the symbol and component properties by using Die Text-In/Out wizards. 

Exporting the symbol 

You can export the symbol by using File > Export > Die Text-Out Wizard. 

In the Die Text-Out Wizard window, you can see the newly added options, that is, Component Properties and Symbol Properties. 

This entire information including the properties will be saved in a text file. 

Importing the symbol 

You can import the same text file in Allegro X APD by using Die Text-In Wizard. 

Choose the text file you want to import. 

Symbol properties added in the text file will be visible in the Die Text-In Wizard window. 

Hi，

There are mang components in BGA ball side of flipchip package.

Are there DFA check space of compont body or pin soldermask to BGA ball or BGA PAD or bga  soldermask in allegro APD?

I only find space of compont to compont in APD DFA.