A remarkable result in probability theory is the "three-sigma rule," which is a generic name for theorems that bound the probability that a univariate random variable will appear near the center of its distribution. This article discusses the familiar three-sigma rule for the normal distribution, a less-familiar rule for unimodal [...]

The post The three-sigma rule appeared first on The DO Loop.

PCI-SIG DevCon 2024 – 32^nd Anniversary

For more than a decade, Cadence has been well-known in the industry for its strong commitment and support for PCIe technology. We recognize the importance of ensuring a robust PCIe ecosystem and appreciate the leadership PCI-SIG provides. To honor the 32^nd anniversary of the PCI-SIG Developer’s Conference, Cadence is announcing a complete PCIe 7.0 IP solution for HPC/AI markets.

Why Are Standards Like PCIe So Important?

From the simplest building blocks like GPIOs to the most advanced high-speed interfaces, IP subsystems are the lifeblood of the chipmaking ecosystem. A key enabler for IP has been the collaboration between industry and academia in the creation of standards and protocols for interfaces. PCI-SIG drives some of the key definitions and compliance specifications and ensures the interoperability of interface IP.

HPC/AI markets continue to demand high throughput, low latency, and power efficiency. This is fueling technology advancements, ensuring the sustainability of PCIe technology for generations to come. As a close PCI-SIG member, we gain valuable early insights into the evolving specs and the latest compliance standards. PCIe 7.0 specifications and beyond will enable the market to scale, and we look forward to helping our customers build best-in-class cutting-edge SoCs using Cadence IP solutions.

Figure 1. Evolution of PCIe Data Rates (source PCI-SIG)

What’s New This Year at DevCon?

At DevCon ’24, the PCIe 7.0 standard will take center stage, and Cadence is showing off a full suite of IP subsystem solutions for PCIe 7.0 this year.

What Sets Cadence Apart?

At Cadence, we believe in building a full subsystem for our testchips with eight lanes of PHY along with a full 8-lane controller. Adding a controller to our testchip significantly increases the efficiency and granularity in characterization and stress testing and enables us to demonstrate interoperability with real-world systems. We are also able to test the entire protocol stack as an 8-lane solution that encompasses many of the applications our customers use in practice. This approach significantly reduces the risks in our customers’ SoC designs.

Figure 2: Piper - Cadence PHY IP for PCIe 7.0

Figure 3: Industry’s first IP subsystem for PCIe 7.0

Which Market Is This For?

At a time when accelerated computing has gone mainstream, PCIe links are going to take on a role of higher importance in systems. Direct GPU-to-GPU communication is crucial for scaling out complex computational tasks across multiple graphics processing units (GPUs) or accelerators within servers or computing pods. There is a growing recognition within the industry of a need for scalable, open architecture in high-performance computing. As AI and data-intensive applications evolve, the demand for such technologies will likely increase, positioning PCIe 7.0 as a critical component in the next generation of interface IP.

Here's a recent article describing a potential use case for PCIe 7.0.

Figure 4: Example use case for PCIe 7.0

Why Are Optical Links Important?

It takes multiple buildings of data centers to train AI/ML models today. These buildings are increasingly being distributed across geographies, requiring optical fiber networks that are great at handling the increased bandwidth over long distances. However, these optical modules soon hit a power wall where all the budgeted power is used to drive the signal from point A to point B, and there is not enough power left to run the actual CPUs and GPUs. Such scenarios create a need for non-retimed, linear topologies. Linear Pluggable Optics (LPO) links can significantly reduce module power consumption and latency when compared to traditional Digital Signal Processing (DSP) based retimed optical solutions, which is critical for accelerating AI performance. Swapping from DSP-based solutions to LPO results in significant cost savings that help drive down expenditure due to lower power and cooling requirements, but this requires a robust high-performance ASIC to drive the optics rather than retimers/DSP.

To showcase the robustness of Cadence IP, we have demonstrated that our subsystem testchip board for PCIe 7.0 can successfully transmit and receive 128GT/s signals through a non-retimed opto-electrical link configured in an external loopback mode with multiple orders of margin to spare.

Figure 5: Example of ASIC driving linear optics

Compliance Is Key

For PCIe 6.0, the official compliance program has not started yet; this is typical for the SIG where the official compliance follows a few years after the spec is ratified to give enough time for the ecosystem to have initial products ready, and for test and equipment vendors to get their hardware/software up and running. At this time, PCIe Gen6 implementations can only be officially certified up to PCIe 5.0 level (the highest official compliance test suite that the SIG supports). We have taken our PCIe 6.0 IP subsystem solution to the SIG for multiple process nodes, and they are all listed as compliant. You can run this query on the pcisig.com website under the Developers->Integrators list by making the following selections:

Due to space limitations, not all combinations could be tested at the May workshop (e.g., N3 root port) – this will be tested in the next workshop.

Also, the SIG just held an “FYI” compliance event this week to bring together the ecosystem for confidential testing (no results were reported, and data cannot be shared outside without violating the PCI-SIG NDA). We participated in the event with multiple systems and can report that our systems have done quite well. The test ecosystem is not mature yet, and a few more FYI workshops will be conducted before the official compliance for 6.0 is launched. We have collaborated with all the key test vendors for electrical and protocol testing throughout the year. As early as the middle of last year, we were able to provide test cards to all these vendors to demo PCIe 6.0 capabilities in their booths at various events. Many of them recorded these videos, and they can be found online.

• Cadence Subsystem IP for PCIe 6.0: Protocol and Electrical Testing
• Cadence Subsystem IP for CXL Protocol Test Demo
• Cadence Subsystem IP for CXL2.0/3.0 Protocol Test Demo
• Cadence Subsystem IP for PCIe 6.0: Protocol Stack Demo

More at the PCI-SIG Developers Conference

Check us out at the PCI-SIG Developer’s conference on June 12 and 13 to see the following demonstrations:

• Robust performance of Cadence IP for PCIe 7.0 transmitting and receiving 128GT/s signals over non-retimed optics
• Capabilities of Cadence IP for PCIe 7.0 measured using oscilloscope instrumentation detailing its stable electrical performance and margin
• The reliability of Cadence IP for PCIe 6.0 interface using Test Equipment to characterize the PHY receiver quality
• A PCI-SIG-compliant Cadence IP subsystem for PCIe 6.0 optimized for both power and performance

As a leader in PCI Express, Anish Mathew of Cadence will share his valuable insights on an important topic: “Impact of UIO ECN on PCIe Controller Design and Performance,” highlighting the strides made by the Cadence design team in achieving this implementation.

Figure 6: Cadence UIO Implementation Summary

Summary

Cadence showcased PCIe 7.0-ready IP at PCI-SIG Developers Conference 2023 and continues to lead in PCIe IP development, offering complete solutions in advanced nodes for PCIe 7.0 that will be generally available early next year. With a full suite of solutions encompassing PHYs, Controllers, Software, and Verification IP, Cadence is proud to be a member of the PCI-SIG community and is heavily invested in PCIe. Cadence was the first IP provider to bring complete subsystem solutions for PCIe 3.0, 4.0, 5.0, and 6.0 with industry-leading PPA and we are proud to continue this trend with our latest IP subsystem solution for PCIe 7.0, which sets new benchmarks for power, performance, area, and time to market.

The market is trending towards integrating and stacking multiple chiplets into a single package to meet the growing demands of speed, connectivity, and intelligence.  However, designing and signing off chiplets and packages individually is time-...(read more)

In the rapidly evolving landscape of automotive electronics, traditional monolithic design approaches are giving way to something more flexible and powerful—chiplets. These modular microchips, which are themselves parts of a whole silicon system, offer unparalleled potential for improving system performance, reducing manufacturing costs, and accelerating time-to-market in the automotive sector. However, the transition to working with chiplets in automotive electronics is not without its challenges.

Designers must now grapple with a new set of considerations, such as die-to-die interconnect standards, complex processes, and the integration of diverse IPs. Advanced toolsets and standardized design approaches are required to meet these challenges head-on and elevate the potential of chiplets in automotive innovation. In the following discourse, we will explore in detail the significance of chiplets in the context of automotive electronics, the obstacles designers face when working with this paradigm, and how Cadence comprehensive suite of IPs, tools, and flows is pioneering solutions to streamline the chiplet design process.

Unveiling Chiplets in Automotive Electronics

For automotive electronics, chiplets offer a methodology to modularize complex functionalities, integrate different chiplets into a package, and significantly enhance scalability and manufacturability. By breaking down semiconductor designs into a collection of chiplets, each fulfilling specific functions, automotive manufacturers can mix and match chiplets to rapidly prototype new designs, update existing ones, and specialize for the myriad of use cases found in vehicles today.

The increasing significance of chiplets in automotive electronics comes as a response to several industry-impacting phenomena. The most obvious among these is the physical restriction of Moore's Law, as large die sizes lead to poor yields and escalating production costs. Chiplets with localized process specialization can offer superior functionality at a more digestible cost, maintaining a growth trajectory where monolithic designs cannot. Furthermore, chiplets support the assembly of disparate technologies onto a single subsystem, providing a comprehensive yet adaptive solution to the diverse demands present in modern vehicles, such as central computing units, advanced driver-assistance systems (ADAS), infotainment units, and in-vehicle networks. This chiplet-based approach to functional integration in automotive electronics necessitates intricate design, optimization, and validation strategies across multiple domains.

The Complexity Within Chiplets

Yet, with the promise of chiplets comes a series of intricate design challenges. Chiplets necessitate working across multiple substrates and technologies, rendering the once-familiar 2-dimensional design space into the complex reality of multi-layered, sometimes even three-dimensional domains. The intricacies embedded within this design modality mandate devoting considerable attention to partitioning trade-offs, signal integrity across multiple substrates, thermal behavior of stacked dies, and the emergence of new assembly design kits to complement process design kits (PDKs).

To effectively address these complexities, designers must wield sophisticated tools that facilitate co-design, co-analysis, and the creation of a robust virtual platform for architectural exploration. Standardizations like the Universal Chip Interconnect Express (UCIe) have been influential, providing a die-to-die interconnect foundation for chiplets that is both standardized and automotive-ready. The availability of UCIe PHY and controller IP from Cadence and other leading developers further eases the integration of chiplets in automotive designs.

The Role of Foundries and Packaging in Chiplets

Foundries have also pivoted their services to become a vital part of the chiplet process, providing specialized design kits that cater to the unique requirements of chiplets. In tandem, packaging has morphed from being a mere logistical afterthought to a value-added aspect of chiplets. Organizations now look to packaging to deliver enhanced performance, reduced power consumption, and the integrity required by the diverse range of technologies encompassed in a single chip or package. This shift requires advanced multiscale design and analysis strategies that resonate across a spectrum of design domains.

Tooling Up for Chiplets with Cadence

Cadence exemplifies the rise of comprehensive tooling and workflows to facilitate chiplet-based automotive electronics design. Their integrations address the challenges that chiplet-based SoCs present, ensuring a seamless design process from the initial concept to production. The Cadence suite of tools is tailored to work across design domains, ensuring coherence and efficiency at every step of the chiplet integration process.

For instance, Cadence Virtuoso RF subflows have become critical in navigating radio frequency (RF) challenges within the chiplets, while tools such as the Integrity 3D-IC Platform and the Allegro Advanced Multi-Die Package Design Solution have surfaced to enable comprehensive multi-die package designs. The Integrity Signal Planner extends its capabilities into the chiplet ecosystem, providing a centralized platform where system-wide signal integrity can be proactively managed. Sigrity and Celsius, on the other hand, offer universally applicable solutions that take on the challenges of chiplets in signal integrity and thermal considerations, irrespective of the design domain. Each of these integrated analysis solutions underscores the intricate symphony between technology, design, and packaging essential in unlocking the potential of chiplets for automotive electronics.

Cadence portfolio includes solutions for system analysis, optimization, and signoff to complement these domain-specific tools, ensuring that the challenges of chiplet designs don't halt progress toward innovative automotive electronics. Cadence enables designers to engage in power- and thermal-aware design practices through their toolset, a necessity as automotive systems become increasingly sophisticated and power-efficient.

A Standardized Approach to Success with Chiplets

Cadence’s support for UCIe underscores the criticality of standardized approaches for heterogeneous integration by conforming to UCIe standards, which numerous industry stakeholders back. By co-chairing the UCIe Automotive working group, Cadence ensures that automotive designs have a universal and standardized Die-to-Die (D2D) high-speed interface through which chiplets can intercommunicate, unleashing the true potential of modular design.

Furthermore, Cadence champions the utilization of virtual platforms by providing transaction-level models (TLMs) for their UCIe D2D IP to simulate the interaction between chiplets at a higher level of abstraction. Moreover, individual chiplets can be simulated within a chiplet-based SoC context leveraging virtual platforms. Utilizing UVM or SCE-MI methodologies, TLMs, and virtual platforms serve as first lines of defense in identifying and addressing issues early in the design process before physical silicon even enters the picture.

Navigating With the Right Tools

The road to chiplet-driven automotive electronics is one paved with complexity, but with a commitment to standards, it is a path that promises significant rewards. By leveraging Cadence UCIe Design and Verification IP, tools, and methodologies, automotive designers are empowered to chart a course toward chiplets and help to establish a chiplet ecosystem. With challenges ranging from die-to-die interconnect to standardization, heterogeneous integration, and advanced packaging, the need for a seamless integrated flow and highly automated design approaches has never been more apparent. Companies like Cadence are tackling these challenges, providing the key technology for automotive designers seeking to utilize chiplets for the next-generation E/E architecture of vehicular technology.

In summary, chiplets have the potential to revolutionize the automotive electronics industry, breathing new life into the way vehicles are designed, manufactured, and operated. By understanding the significance of chiplets and addressing the challenges they present, automotive electronics is poised for a paradigm shift—one that combines the art of human ingenuity with the power of modular and scalable microchips to shape a future that is not only efficient but truly intelligent.

Learn more about how Cadence can help to enable automakers and OEMs with various aspects of automotive design.

Hi,

Is there any way to instruct the tool to reduce the low metals effort and route more on top layers? 

Hi all, 

I have made a custom cell in Innovus that I will be instantiating into a bigger block, which I will also be using Innovus to do the Place & Route. 

I understand that I can generate a *.lef file and a *.lib file using Innovus. However, I need to also create a *.db file (these format of files are often used in DC Compiler synthesis tool). 

Is there a way to create the *.db file from Innovus? Or, is there a tool that I can use to create this *.db file? 

Thank you for your time. 

Is there a skill command for "Assign Layout Instance terminals", this form appears when i click on define device correspondence and Bind the devices.

Also,

Problem Statement : i have a schematic with a couple of transistor symbols and and i alos have a corresponding layout view with respective layout transistors but they all are inside a pCell(created by me) i.e layout transistor called inside a custom Pcell. Now i have multiple symbols in schematic view and a single instance(pCell) in layout view. 
Is there a way how i can bind these schematic symbols with layout symbols inside the pCell(custom)? Even if i have to use cph commands i'm fine with it. need help here.

The idea here is to establish XL connectivity between the schematic symbols and corresponding layout transistors(inside the pCell).

Thanks,

Shankar

A new Python library has been written to facilitate an interface between Python and AWR software using a command structure that adheres more closely to Python coding conventions. This library is labeled "pyawr-utils" and it is installed using the standard Python pip command. Comprehensive documentation for installing and using pyawr-utils is available.(read more)

When starting a new design, it's important to take the time to consider design recommendations that prevent problems that can arise later in the design cycle. This two-part compilation of guidelines for starting a new design is the result of years of Cadence AWR Design Environment platform Support experience with designs. Pre-design decisions for user interface, simulation, layout, and library configuration lay the groundwork for a successful and efficient AWR design. This blog covers the user interface (UI) and simulation considerations designers should note prior to starting a design.(read more)

Cadence AWR Design Environment Software Featured in Multiple Training Course Options: Live and Virtual Starting in October(read more)

The Cadence AWR Design Environment V22.1 production release is now available for download at Cadence Downloads with design environment, AWR Microwave Office, AWR VSS, AWR Analyst, and other enhancements.(read more)

AWR V22.1 software introduces the Pointer-Hybrid optimization method which uses a combination of optimization methods, switching back and forth between methods to efficiently find the lowest optimization error function cost. The optimization algorithm automatically determines when to switch to a different optimization method, making this a superior method over manual selection of algorithms. This method is particularly robust in regards to finding the global minima without getting stuck in a local minima well.(read more)

When starting a new design, it's important to take the time to consider design recommendations that prevent problems that can arise later in the design cycle. This two-part compilation of guidelines for starting a new design is the result of years of Cadence AWR Design Environment platform Support experience with designs. Pre-design decisions for user interface, simulation, layout, and library configuration lay the groundwork for a successful and efficient AWR design. This blog, part 2, covers the layout and component library considerations designers should note prior to starting a design.(read more)

A training webinar on Microwave Office will be given June 27, 2023. The emphasis will be on EM simulation.(read more)

A recording of a training webinar on Microwave Office is available. Topics show the design environment, with special emphasis placed on electromagnetic (EM) simulation. Normal 0 false false false EN-US JA X-NONE ...(read more)

By David Vye, Senior Product Marketing Manager, AWR, Cadence When designing multi-octave high-power amplifiers, it is a challenge to achieve both broadband gain and power matching using a combination of lumped and distributed techniques. One approach...(read more)

New online training course for AXIEM EM Simulator in AWR Microwave Office is available.(read more)

i want to read from text file two values  on two ports , i wrote  that  code, and i have that error that shown in the image below . and also the data in text file is shown as screenshot

module read_file (a,b);

electrical a,b;
integer in_file_0,data_value, valid, count0,int_value;

analog begin
@(initial_step) begin
in_file_0 = $fopen("/home/hh1667/ee610/my_library/read_file/data2.txt","r");

valid = $fscanf (in_file_0, "%b,%b" ,int_value,count0);
end

V(a) <+ int_value;
V(b) <+ count0;

end

endmodule

Hi Cadence, 

I use simvision 20.09-s007 but my computer screen resolution is very high. As a result, the texts are too small. 

In ~/.simvision/Xdefaults I changed that number to 16, from 12. But the signal names in the waveform traces don't reflect the change. 

Simvision*Font: -adobe-helvetica-medium-r-normal--16-*-*-*-*-*-*-*

Other .font changes seem to reflect on the simvision correctly, except the signal names. 

How do I fix that? I dont mind a single variable to change all the texts fonts to 16. 

Thank you!

PS: I found the answer with another post. I change Preference/Waveform/Display/Signal Height. 

Hi, have two designs and would like to copy paste one area of circuit from the old design to the new design, best way/approach and guidance please..

Hello,

I am trying to load some of the signals of the design saved in the signals.svwf to the waveform windown via the tcl file, I am using the following commands but nothing works, Can you please help 

 -submit waveform loadsignals -using "Waveform 2" FB1.svwf but it gives me the below error

-submit waveform new -reuse -name Waveforms

I want to use a transmission gate in my design, but it is not available as a standard cell for Genus RTL synthesis. How can I perform an analysis of area, power, and critical path delay that includes the transmission gate alongside standard cells?

Could you provide guidance or a methodology for integrating custom cells, like the transmission gate, into the synthesis flow for accurate analysis?

I am trying to understand the Linting process. I know that mainly JasperGold is the tool for this purpose. Though I think JasperGold is more suited for later stages of the design. As a RTL Design Engineer, I want to make sure that if another tool has the capability of doing Linting earlier in the flow. for example, does Xcelium, Genus or Confomal support linting. I have seen some contradicting information online regarding this topic, though I can't find anything related to Linting on any of these tools.

Thanks

The rising customer expectations, intermingling fields and high performance needs can be satisfied with the system based design. An intelligent Systems Design strategy can offer a quicker route to an optimum design and helps to increase designers' productivity and analyzes efficiency by providing the ability to explore the entire design space. Cadence Intelligent System Strategy enables a system design revolution and reduces project schedules with optimized continuous integration.(read more)

At what stage in the design cycle do you start to think about the PCB material costs? What about the costs to assemble the PCB? Once a design becomes successful, should you then redesign it to achieve a scalable product? Placing components and routi...(read more)

OrCAD X is the next-generation integrated PCB design platform. It brings to you a powerful cloud-enabled design solution that includes design and library data management integrated with the proven PCB design and analysis product portfolio of Cad...(read more)

Explore Impacts of Finite Interconnect Impedance on PDN Characterization

Over the past few decades, many details have been worked out in the power distribution network (PDN) in the frequency and time domains. We have simulation tools that can analyze the physical structure from DC to very high frequencies, including spatial variations of the behavior. We also have frequency- and time-domain test methods to measure the steady-state and transient behavior of the built-up systems.

All of these pieces in our current toolbox have their own assumptions, limitations, and artifacts, and they constantly raise the challenging question that designers need to answer: How to select the design process, simulation, measurement tools, and processes so that we get reasonable answers within a reasonable time frame with a reasonable budget.

Read this award-winning DesignCon 2024 paper titled “Impact of Finite Interconnect Impedance Including Spatial and Domain Comparison of PDN Characterization.” Led by Samtec’s Istvan Novak and written with a team of nine authors from Cadence, Amazon, and Samtec, the paper discusses a series of continually evolving challenges with PDN requirements for cutting-edge designs.

Read the full paper now: “Impact of Finite Interconnect Impedance Including Spatial and Domain Comparison of PDN Characterization.”

Power network design and analysis of 3D-ICs is a major challenge due to the complex nature and large size of the power network. In addition, designers must deal with the complexity of routing power through the interposer, multiple dies, through-silicon vias (TSVs), and through-dielectric vias (TDVs).
Cadence’s Integrity 3D-IC Platform and Voltus IC Power Integrity Solution provide a fully integrated solution for early planning and analysis of 3D-IC power networks, 3D-IC chip-centric power integrity signoff, and hierarchical methods that significantly improve capacity and performance of power integrity (PI) signoff while maintaining a very high level of accuracy at signoff. This blog summarizes the typical design challenges faced by today’s 3D-IC designers, as discussed in our recent webinar, “Addressing 3D-IC Power Integrity Design Challenges.” Please click here to view the full webinar.

Major Trends in Advanced Chip Design

From chips to chiplets, stacked die, 3D-ICs, and more, three major trends are impacting advanced semiconductor packaging design. The first is heterogenous integration, which we define as a disaggregated approach to designing systems on chip (SoCs) from multiple chiplets. This approach is similar to system-in-package (SiP) design, except that instead of integrating multiple bare die – including 3D stacking – on a single substrate, multiple IPs are integrated in the form of chiplets on a single substrate.

The second major trend is around new silicon manufacturing techniques that leverage silicon vias (TSVs) and high-density fanout RDL. These advancements mean that silicon is becoming a more attractive material for packaging, especially when high bandwidth and form factor become key attributes in the end design. This brings new design and verification challenges to most packaging engineers who typically work with organic and ceramic substrate materials.

Finally, on the ecosystem side, all the large semiconductor foundries now offer their own versions of advanced packaging. This brings new ways of supporting design teams with technologies like reference flows and PDKs, concepts that have typically been lacking in the packaging community. Cadence has worked with many of the leading foundries and outsourced semiconductor assembly and test facilities (OSATs) to develop multi-chip(let) packaging reference flows and package assembly design kits. The downside is that, with the time restrictions designers are under today, there isn’t enough time to simulate the details of these flows and PDKs further.

For those who must make the best electro/thermal/physical decisions to achieve the best power/performance/area/cost (PPAC), factors can include accurate die size estimations, thermal feasibility, die-to-die interconnect planning, interposer planning (silicon/organic), front-to-front and front-to-back (F2F/F2B) planning, layer stack and electromigration/ IR drop (EMIR)/TSV planning, IO bandwidth feasibility, and system-level architecture selection.

3D-IC Power Network Design and Analysis

The key to success in 3D-IC design is early power integrity planning and analysis. Cadence’s Integrity 3D-IC platform is a high-capacity 3D-IC platform that enables 3D design planning, implementation, and system analysis in a single, unified cockpit. Cadence’s Voltus IC Power Integrity Solution is a comprehensive full chip electromigration, IR drop, and power analysis solution. With its fully distributed architecture and hierarchical analysis capabilities, Voltus provides very fast analysis and has the capacity to handle the largest designs in the industry. Typically, 3D-IC PDN design and analysis is performed in four phases, as shown in Figure 1.

Phase 1 - Perform early power delivery network (PDN) exploration with each fabric’s PDN cascaded in system PI with early circuit models.

Phase 2 – Plan 3D-IC PDNs in Cadence’s Integrity 3D-IC platform, including micro bumps, TSVs, and through dielectric vias (TDVs), power grid synthesis for dies, and early rail analysis and optimization.

Phase 3 – Perform full chip-centric signoff in Voltus with detailed die, interposer, and package models, including chip die models, while keeping some dies flat.

Phase 4 – Perform full system-level signoff with Cadence’s Sigrity SystemPI using detailed extracted package models from Sigrity XtractIM, board models from Sigrity PowerSI or Clarity 3D Solver, interposer models from XtractIM or Voltus, and chip power models from Voltus.

Figure 1. 3D-IC PDN design and analysis phases

3D-IC Chip-Centric Signoff

The integration of Integrity 3D-IC and Voltus enables chip-centric early analysis and signoff. Figure 2 and Figure 3 highlight the chip centric early PI optimization and signoff flows. In early analysis, the on-chip power networks are synthesized, and the micro bumps and TSVs can be placed and optimized. In the signoff stage, all the detailed design data is used for power analysis, and detailed models are extracted and used for package, interposer, and on-die power networks.

Figure 2. Early chip-centric PI analysis and optimization flow

Figure 3. Chip-centric 3D-IC PI signoff

Hierarchical 3D-IC PI Analysis

To improve the capacity and performance of 3D-IC PI analysis, Voltus enables hierarchical analysis using chiplet models. Chiplet models can be reduced chip models in spice format or more accurate xPGV models which are highly accurate proprietary models generated by Voltus. With xPGV models, the hierarchical PI analysis has almost the same accuracy as flat analysis but offers 10X or higher benefit in runtime and memory requirements.

Conclusion

This blog has highlighted the major design trends enabled by advanced 3D packaging and the design challenges arising from these advancements. The design of power delivery networks is one of these major challenges. We have discussed Cadence solutions to overcome this PI challenge. To learn more, view our recent webinar, "Addressing 3D-IC Power Integrity Design Challenges" and visit the Voltus web page.

When it comes to system integration, PCB designers need to collaborate with the signal analysis or integrity team to run pre-route or post-route analysis and modify constraints, floorplan, or topology based on the results. Allegro PCB Edito...(read more)

Melika Roshandell, Cadence product marketing director for the Celsius Thermal Solver, recently published an article in Designing Electronics discussing how the use of modern thermal analysis techniques can help engineers meet the challenges of today’s complex electronic designs, which require ever more functionality and performance to meet consumer demand.

Today’s modern electronic designs require ever more functionality and performance to meet consumer demand. These requirements make scaling traditional, flat, 2D-ICs very challenging. With the recent introduction of 3D-ICs into the electronic design industry, IC vendors need to optimize the performance and cost of their devices while also taking advantage of the ability to combine heterogeneous technologies and nodes into a single package. While this greatly advances IC technology, 3D-IC design brings about its own unique challenges and complexities, a major one of which is thermal management.

To overcome thermal management issues, a thermal solution that can handle the complexity of the entire design efficiently and without any simplification is necessary. However, because of the nature of 3D-ICs, the typical point tool approach that dissects the design space into subsections cannot adequately address this need. This approach also creates a longer turnaround time, which can impact critical decision-making to optimize design performance. A more effective solution is to utilize a solver that not only can import the entire package, PCB, and chiplets but also offers high performance to run the entire analysis in a timely manner.

Celsius Thermal Management Solutions

Cadence offers the Celsius Thermal Solver, a unique technology integrated with both IC and package design tools such as the Cadence Innovus Implementation System, Allegro PCB Designer, and Voltus IC Power Integrity Solution. The Celsius Thermal Solver is the first complete electrothermal co-simulation solution for the full hierarchy of electronic systems from ICs to physical enclosures. Based on a production-proven, massively parallel architecture, the Celsius Thermal Solver also provides end-to-end capabilities for both in-design and signoff methodologies and delivers up to 10X faster performance than legacy solutions without sacrificing accuracy.

By combining finite element analysis (FEA) for solid structures with computational fluid dynamics (CFD) for fluids (both liquid and gas, as well as airflow), designers can perform complete system analysis in a single tool. For PCB and IC packaging, engineering teams can combine electrical and thermal analysis and simulate the flow of both current and heat for a more accurate system-level thermal simulation than can be achieved using legacy tools. In addition, both static (steady-state) and dynamic (transient) electrical-thermal co-simulations can be performed based on the actual flow of electrical power in advanced 3D structures, providing visibility into real-world system behavior.

Designers are already co-simulating the Celsius Thermal Solver with Celsius EC Solver (formerly Future Facilities’ 6SigmaET electronics thermal simulation software), which provides state-of-the-art intelligence, automation, and accuracy. The combined workflow that ties Celsius FEA thermal analysis with Celsius EC Solver CFD results in even higher-accuracy models of electronics equipment, allowing engineers to test their designs through thermal simulations and mitigate thermal design risks.

Conclusion

As systems become more densely populated with heat-dissipating electronics, the operating temperatures of those devices impact reliability (device lifetime) and performance. Thermal analysis gives designers an understanding of device operating temperatures related to power dissipation, and that temperature information can be introduced into an electrothermal model to predict the impact on device performance. The robust capabilities in modern thermal management software enable new system analyses and design insights. This empowers electrical design teams to detect and mitigate thermal issues early in the design process—reducing electronic system development iterations and costs and shortening time to market.

To learn more about Cadence thermal analysis products, visit the Celsius Thermal Solver product page and download the Cadence Multiphysics Systems Analysis Product Portfolio.

Cadence is super excited to announce SPB 23.1 release —Your freedom to design boldly!  

These tools help engineers build better PCBs faster with the new 3D engine and optimized interface.  

We have been hard at work to bring you this release and believe that it will help you take control of the PCB design process with the powerful new features in Allegro X APD like: 

• Packaging Support in 3DX Canvas 

• 3DX Wire DRCs 

• Aligning Components by Offset 

• Text Wizard Enhancements 

• Device File Reuse for Existing Components for Netlist and Logic Import 

Watch this space to know all about What’s New in SPB 23.1.  

Regards 

Team PCBTech 

Cadence Design System 

For individuals, small businesses, or teams, START YOUR FREE TRIAL. 

Starting SPB 23.1, Allegro Package Designer Plus (APD+) has been rebranded as Allegro X Advanced Package Designer (Allegro X APD).

The splash screen for Allegro X APD will appear as shown below, instead of showing APD+ 2023:

For the Windows Start menu in 23.1, it will display as Allegro X APD 2023 instead of APD+ 2023, as shown below

23.1 Start menu 

In the Product Choices window for 23.1, you will see Allegro X Advanced Package Designer in the place of Allegro Package Designer +, as shown below: 

23.1 product title

Have you heard that starting SPB 23.1, Allegro Package Designer Plus (APD+) will be renamed as Allegro X Advanced Package Designer (Allegro X APD)? 

Allegro X APD offers multiple new features and enhancements on topics like Via Structures, Wirebond, Etchback, Text Wizards, 3D Canvas, and more. 

This post presents the new 3DX Canvas introduced in SPB 23.1. This can be invoked from Allegro X APD (from the menu item View > 3DX Canvas). 

Some of the key benefits of the new canvas: 

• This canvas addresses the scale and complexity in large modern package designs. It provides highly efficient visual representation and implementation of packages. 
  
• The new architecture enables high-performance 3D incremental updates by utilizing GPU for fast rendering. 
  
  
• Real-time 3D incremental updates are supported, which means that the 3D view is in sync with all changes to the database. 
  
  
• The new canvas provides 3D visualization support for packaging objects such as wire bonds, ball, die bump/pillar geometries, die stacks, etch back, and plating bar. 
  
  
• This release also introduces the interactive measurement tool for a 3D view of packages. Once you open 3DX Canvas, press the Alt key and you can select the objects you want to measure. 
  
• 3DX Canvas provides new 3D DRC Bond Wire Clearances with Real 3D DRC Checks. True 3D DRC in Constraint Manager has been introduced. If you open Constraint Manager, there will be a new worksheet added. Following DRC checks are supported: 

  Wire to Wire 
  Wire to Finger 
  Wire to Shape 
  Wire to Cline 
  Wire to Component

Power and Ground rings are exposed rings of metal surrounding a die that supply power/ground to the die and create a low-impedance path for the current flow. These rings ensure stable power distribution and reduce noise. Allegro X Package Designer Plus has a utility called Power/Ground Ring Generator which lets you define and place one or more shapes in the form of a ring around a die.

 To run the PWR/GND Generator Wizard, go to Route > Power/Ground Ring Generator or type "pring wizard" in the APD command window to invoke the Wizard.

This Wizard lets you define and place one or more shapes in the form of a ring around a die. The Power/Ground Ring Wizard creates up to 12 rings (shapes) at a time. If you require more rings, you can run the Power/Ground Ring Wizard as many times as needed. This command displays a wizard in which you can specify:

• The number of rings to be generated
• The creation of the first ring as a die flag (Die flag is the boundary of the die like the power ring.)
  • If you create a die flag and the first ring is the same net as the flag, you can enter a negative distance to overlap the ring and the die flag.
• Multiple options for placement of the rings with respect to:
  • Origination point
  • Distance from the edge of the die
  • Distance from the nearest die pin on each die side
• The reference designator of the die with which the rings will be used
• The distance between rings
• The width of each ring
• The corner types on each ring (arc, chamfer, and right-angle)
• An assigned net name for each ring
• A label for each ring

The rings are basic in nature. For other shape geometries or split rings, choose Shape > Polygon or Shape > Compose/Decompose Shape from the menu in the design window.

Depending on the options selected, the Power/Ground Ring Wizard UI changes, representing how the rings will be created. Verify the Wizard settings to ensure that the rings are created as intended.

1. When the Power/Ground Ring Wizard appears, set the number of rings to 2, accept the other defaults, and click Next. You can set Create first ring as die flag to create a basic die flag.

         2. Define Ring 1 and the net associated with it.

              a) Browse and choose Vss in the Net Names dialog box.

            b) Click OK.

            c) Specify the label as VSS.

            d) Click Next.

             The first ring should appear in your design. It is associated with the proper net; in this case, VSS.

2. For the second ring, choose the net as Vdd and specify the label as VDD.
3. Click Next.
4. Click Finish in the Result Verification screen to complete the process.

The completed rings appear as shown below.

Now, when you click on Power and Ground Die Pin and add wirebonds, you will see that the wirebonds are placed directly on the Power and Ground rings.

When things go wrong with your package design flow, it can sometimes be difficult to understand the cause of the issue. This can be something like a die component is wrongly identified as a BGA, a via stack has an alignment issue, or there are duplicate bondwires. These are just a few examples of issues; there can be many more. When interactive messages and log files do not help determine the problem, the Package Design Integrity Check tool becomes very handy. This feature lets you run integrity checks, which ensures that the database is configured correctly. 

To invoke the command from Allegro X Advanced Package Designer, use the Tools > Package Design Integrity menu. 

Or type package integrity at the Command  prompt. 

The Package Design Integrity Checks dialog box includes all categories and checks currently registered for the currently running product. You can enable all these categories and checks or only the one that you want to run. This utility can fix errors automatically (where possible). Errors and warnings are written to the “package_design_check.log” file.  

The utility can also be extended with your own custom rules based on your specific flows and needs. 

The Cadence Palladium Emulation Platform is a hardware system that implements the design, accelerating its execution and verification. Itoffers the highest performance and fastest bring-up times for pre-silicon validation of billion-gate designs, using a custom processor built by Cadence.

This Palladium Introduction course is based on the Palladium 23.03 ISR4 version and covers the following modules:

• Introduction
• Palladium flow
• Running a design on the Palladium system

This course starts with an “Introduction” module that explains Palladium and other verification platforms to show its place in the big picture. It also compares Palladium with Protium and simulation and discusses its usage and limitations.

The “Palladium Flow” module includes two stages at a high level, which are Compile and Run. Then, it covers these stages in detail. First, it covers the ICE compile flow and IXCOM compile flow steps in detail. Then it explains Run, which is common for both ICE and IXCOM modes.

The third module, “Running Design on the Palladium System,” covers all the items required for running your design on the Palladium system, including:

• Software stack requirements
• Basic concepts required to understand the flow
• Compute machine requirements

In addition, this course contains labs for both the ICE and IXCOM flows with detailed steps to exercise the features provided by the Palladium system. The lab explains a practical example of multiple counters and exercising their signals for force, monitor, and deposit features, along with frequency calculation using a real-time clock. The course is available on the Cadence support page:

There is also a Digital Badge available. You will find the Badge exam opportunity when you enroll in the Online training or after you have taken the training as "live" training.

For questions and inquiries, or issues with registration, reach out to us at Cadence Training. Want to stay up to date on webinars and courses? Subscribe to Cadence Training emails. To view our complete training offerings, visit the Cadence Training website.

Related Training Bytes

• Palladium: What Are Verification Platforms
• Palladium: What Is Processor Based Emulation
• Palladium: Comparing Emulation (Z2) and Prototyping (X2)
• Palladium: What Are ICE and IXCOM Compile Flow
• Palladium: How to Process a Design to Run on Palladium
• Palladium: XCOM Compile Flow (TB+RTL to Palladium Database)
• Palladium: ICE Compile Flow (RTL to Palladium Database)
• Palladium: Legacy ICE Compile Flow
• Palladium: Cadence Software Releases for Palladium and Protium Flow
• Palladium: Setting of PATHs for Using Palladium
• Palladium: Z2 Hardware Structure (Blade and Boards)
• Palladium: What Is Sourceless and Loadless nets
• Palladium: Design Clocks
• Palladium: Step Count and Step Clock
• Palladium: Steps for Running the Design on Palladium Z2

Related Courses

• Verilog Language and Application Training
• SystemVerilog for Design and Verification
• Xcelium Simulator

Related Blogs

• Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users
• It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!
• Training Insights - Free Online Courses on Cadence Learning and Support Portal

The Sigrity and Systems Analysis (SIGRITY/SYSANLS) 2024.1 release is now available for download at Cadence Downloads . For the list of CCRs fixed in this release, see the README.txt file in the installation hierarchy. SIGRITY/SYSANLS 2024.1 Here is a list of some of the key updates in the SIGRITY/SYSANLS 2024.1 release: For more details about these and all the other new and enhanced features introduced in this release , refer to the following document: Sigrity Release Overview and Common Tools What's New . Supported Platforms and Operating Systems Platform and Architecture X86_64 (lnx86) Windows (64 bit) Development OS RHEL 8.4 Windows Server 2022 Supported OS RHEL 8.4 and above RHEL 9 SLES 15 (SP3 and above) Windows 10 Windows 11 Windows Server 2019 Windows Server 2022 Systems Analysis 2024.1 Clarity 3D Solver Clarity 3D Layout Structure Optimization Workflow : A new workflow, Clarity 3D Layout Structure Optimization Workflow, has been added to Clarity 3D Layout. This workflow integrates Allegro PCB Designer with Clarity 3D Layout for high-speed structure optimization. Component Geometry Model Editor : The new Clarity 3D Layout editor lets you set up ports, solder bumps/balls/extrusions, and two-terminal and multi-terminal circuits using a single GUI. Coaxial Open Port Option Added to Port Setup Wizard : The Coaxial Open Port option lets you create ports for each target net pin and reference net pin in Clarity 3D Layout. The nearby reference net pins are then used as a reference for each target net pin, reducing the number of ports needed. In addition, the ports of unused reference net pins are shorted to the ground. Parametric Import Option Added : Two new options, Parametric Import and Default Import , have been added to the Tools – Launch Clarity3DWorkbench menu. The Parametric Import option lets you import the design along with its parameters into Clarity 3D Workbench. The Default Import option lets you ignore the parameters when importing the design into Clarity 3D Workbench. Component Library Added to Generate 3D Components : Clarity 3D Workbench now includes a new component library that lets you use predefined 3D component templates or add existing 3D components to create 3D designs and simulation models. AI-Powered Content Search Capability : Clarity 3D Workbench and Clarity 3D Transient Solver now support an AI-powered capability for searching the content and displaying relevant information. Expression Parser to Handle Undefined Parameters : Clarity 3D Workbench and Clarity 3D Transient Solver support writing expressions or equations containing undefined parameters in the Property window to describe a simulation variable. The improved expression parser automatically detects any undefined parameter in an expression and prompts users to specify their values. This capability lets you define a model or a simulation variable as a function instead of specifying static values. For detailed information, refer to Clarity 3D Layout User Guide and Clarity 3D Workbench User Guide on the Cadence Support portal. Clarity 3D Transient Solver Mesh Processing Improved to Simulate Large Use Cases : Clarity 3D Transient Solver leverages a new meshing algorithm that enhances overall mesh processing, specifically for large designs and use cases. The new algorithm dramatically improves the mesh quality, minimum mesh size, number of mesh key points, total mesh number, and memory usage. Advanced Material Processing Engine : The material processing capability has been enhanced to handle thin outer metal, which previously resulted in open and short issues in some designs. In addition, the material processing engine offers improved mode extraction for particular use cases, including waveguide and coaxial designs. Characteristic Impedance Calculation Improved : The solver engine now uses a new analytical calculation method to calculate the characteristic impedance of coaxial designs with improved accuracy. For detailed information, refer to Clarity 3D Transient Solver User Guide on the Cadence Support portal. Celsius Studio Celsius Interchange Model Introduced : Celsius Studio now supports Celsius Interchange Model generation, which is a 3D model derived from detailed physical designs for multi-physics and multi-scale analysis. This Celsius Interchange Model file ( .cim ) serves as a design information carrier across Celsius Studio tools, enabling a variety of simulation and analysis tasks . Celsius 3DIC Thermal Workflow Improvements : The Thermal Simulation workflows in Celsius 3DIC have been significantly enhanced. Key improvements include: Advanced Power Setup with Transient Power Function and Multi Mode options Enhanced GUI for the Mesh Control and Simulation Control tabs Improved meshing capabilities Celsius Interchange Model ( .cim ) generation Material library support for block and connections Import of Heat Transfer Coefficients (HTCs) from a CFD file Bump creation through the Bump Array Wizard Layer Stackup CSV file generation Celsius 3DIC Warpage and Stress Workflow Enhancements : The Warpage and Stress workflow in Celsius 3DIC has undergone significant improvements, such as: Improved multi-stage warpage simulation flow for 3DIC packaging process Enhanced GUI for the Mesh Control , Simulation Control , and Stress Boundary Conditions tabs Support for large deformations and temperature profiles Bump creation through the Bump Array Wizard New constraint types Enhanced meshing capabilities Geometric Nonlinearity Support in Warpage and Stress Analysis : Large deformation analysis is now supported in warpage and stress studies. This study uses the Total Lagrangian approach to model geometric nonlinearities in simulation, which allows accurate prediction of final deformations. Thermal Network Extraction and Simulation : In the solid extraction flow in Celsius 3D Workbench, you can now import area-based power map files to create terminals. For designs with multiple blocks, this capability allows automatic terminal creation, eliminating the need to manually create and set up 2D sheets individually. Additionally, thermal throttling feature is now supported in Celsius Thermal Network. This makes it ideal for preliminary analyses or when a quick estimation is required. It runs significantly faster than 3D models, allowing for quicker iterations and more efficient decision-making. For detailed information, refer to the Celsius 3DIC User Guide , Celsius Layout User Guide and Celsius 3D Workbench User Guide on the Cadence Support portal. Sigrity 2024.1 Layout Workbench Improved Graphical User Interface : A new option, Use Improved User Interface , has been added in the Themes page of the Options dialog box in the Layout Workbench GUI. In the new GUI, the toolbar icons and menu options have been enhanced and rearranged. For detailed information, refer to Layout Workbench User Guide on the Cadence Support portal. Broadband SPICE Python Script Integration with Command Line for Simulation Tasks : Broadband SPICE lets you run Python scripts directly from the command line for performing simulation and analysis. The new -py and *.py options make it easier to integrate Python scripts with the command-line operations. This update streamlines the process of automating and customizing simulations from the command line, which makes your simulation tasks faster and easier. For detailed information, refer to Broadband SPICE User Guide on the Cadence Support portal. Celsius PowerDC Block Power Assignment (BPA) File Format Support : PowerDC now supports the BPA file format. Similar to the Pin Location (PLOC) file, the BPA file is a current assignment file that defines the total current of a power grid cell, which is then equally distributed across the power pins within the cell. This provides better control over the power distribution. Ability to Run Multiple IR Drop Cases Sequentially : You can now select multiple result sinks from the Current-Limited IR Drop flow and run IR Drop analysis for them sequentially. PowerDC automatically runs the simulations in sequence after you select multiple result sinks. This saves time by automating the process. Enhanced Support for Mixed Conversion Devices : PowerDC now supports mixing different conversion devices, such as switching regulators and linear regulators within a single DC-DC/LDO instance. This enhancement offers added flexibility by letting you configure each instance in your design according to your specific needs. For detailed information, refer to PowerDC User Guide on the Cadence Support portal. PowerSI Monte Carlo Method Added : A new option, Monte Carlo Method, has been added in the Optimality dialog box. This option lets you create multiple random samples to depict variations in the input parameters and assess the output. Channel Check Optimization Added : The S-Parameter Assessment workflow in PowerSI now supports Channel Check Optimization . It uses the AI-driven Multidisciplinary Analysis and Optimization (MDAO) technology that lets you optimize your design quickly and efficiently with no accuracy loss. For detailed information, refer to PowerSI User Guide on the Cadence Support portal. SPEEDEM Multi-threaded Matrix Solver Support Added : The Enable Multi-threaded Matrix Solver check box has been added that lets you accelerate the simulation speed for high-performance computing. This check box provides two options, Automatic and Always, to include the -lhpc4 or -lhpc5 parameter, respectively, in the SPEEDEM Simulator (SPDSIM) before running the simulation. For detailed information, refer to the SPEEDEM User Guide on the Cadence Support portal. XtractIM Options to Skip or Calculate Special DC-R Simulation Results : The Skip DC_R of Each Path and Only DC_R of Each Path options have been added to the Setup menu. Skip DC_R of Each Path : This option lets you skip the calculation of the DC-R result during the simulation. Other results, such as SPICE T-model , RL_C of Each Path , Coupling of Each Path , etc., are still calculated. Only DC_R of Each Path : This option lets you calculate the DC-R result only during the simulation. Other results, such as SPICE T-model , RL_C of Each Path , Coupling of Each Path , etc., are not calculated. Color Assignment for Pin Matching : The MCP Auto Connection window includes the Display Color Editor , which lets you assign a color for pin matching. It helps you easily identify the matching pins in the left and right sections of the MCP Auto Connection window . Ability to Save Simulations Individually : The Save each simulation individually check box has been added to the Tools - Options - Edit Options - Simulation (Basic) - General form. Select this check box and run the simulation to generate a simulation results folder containing files and logs with a timestamp for each simulation. Reuse of SPD File Settings : The XtractIM setup check box lets you import an existing package setup to reuse the configurations and settings from one .spd file to another. For detailed information, refer to XtractIM User Guide on the Cadence Support portal. Documentation Enhancements Cloud-Based Help System Upgraded The cloud-based help system, Doc Assistant, has been upgraded to version 24.10, which contains several new features and enhancements over the previous 2.03 version. Sigrity Release Team Please send your questions and feedback to sigrity_rmt@cadence.com .

Allegro X System Capture offers a complete ecosystem for library development. This post introduces the latest DE-HDL Library Development using System Capture course in which you learn how to create different library objects. As a librarian, you often work with numerous libraries. Your tasks include creating or modifying symbols for libraries. To use Allegro X System Capture to create a library, you can follow the steps in the following flowchart: Let’s go through each step in detail. Setting the CDS_SITE Variable Before you start library development for a new project, set the CDS_SITE system environment variable. This step is required to access libraries and other configuration files. Creating a Project in Allegro X System Capture The next step is to create a project in Allegro X System Capture. Adding a Library to the Project Symbol development consists of creating symbol graphics, electrical data, and properties used by different tools in the PCB design flow. To add a library to a project, first create a library in the Libraries pane of the Project e xplorer. Creating Library Symbols The library development process supports the creation of various types of symbols. Creating a Symbol with Multiple Views You can generate multiple views of the same symbol using the Duplicate command. For example, a discrete symbol, such as a resistor, can have multiple views, as shown in the following image: Creating a Split Symbol For advanced designs, you often need to create library symbols and break them into multiple sections to support the design process. When a symbol shows all the logical pins in the physical package, it is called a single-section or flat symbol. Many large ICs have several pins and the symbols need to fit on a single schematic page. One workaround is to use vector pin names on a symbol to reduce its size, although manufacturers prefer schematics that show each pin. You can divide these high-pin count devices into smaller pieces, where each piece is a separate version of the part. Such parts are referred to as split parts or multi-section symbols. For multi-section symbols, you can create two types of split parts—symmetrical and asymmetrical. Symmetrical Split Symbols A symmetrical split symbol has only one symbol graphic, which holds two or more identical logic symbols, each with its own unique physical pin numbers. You can create a symmetrical split symbol using the Duplicate Section icon in the canvas window. Each symbol section contains the same set of pins but different pin numbers, as shown in the following image: Asymmetrical Split Symbols An asymmetrical split symbol is a symbol whose physical package contains one or more unique schematic symbols. You can create an asymmetrical split symbol by clicking the New Section icon in the canvas window. Asymmetrical symbols have a unique set of logical pins, as shown in the following image: Creating Symbols Using the Spreadsheet Interface To simplify the development of large symbols, Allegro X System Capture has a Spreadsheet Interface . You can copy from a spreadsheet into the interface. This saves time and helps minimize errors introduced by manual entry. In conclusion, the DE-HDL library development using Allegro X System Capture course involves several critical steps and supports various symbol creation techniques. This course helps librarians create and modify symbols effortlessly and deepens their understanding of library development within Allegro X System Capture. To learn more about this topic, enroll in the DE-HDL Library Development using Allegro X System Capture course on the Cadence Support portal . Click the training byte link now or visit Cadence Support and search for training bytes under Video Library. If you find the post useful and want to delve deeper into training details, enroll in the following online training course for lab instructions and a downloadable design: DE-HDL Library Development using Allegro X System Capture (Online). You can become Cadence Certified once you complete the course. Cadence Training Services now offers free Digital Badges for all popular online training courses. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can add the digital badge to your email signature or any social media channels, such as Facebook or LinkedIn, to highlight your expertise. To find out more, see the blog post Take a Cadence Masterclass and Get a Badge . You might also be interested in the training Learning Map that guides you through recommended course flows as well as tool experience and knowledge-level training modules. To find information on how to get an account on the Cadence Learning and Support portal, see here . SUBSCRIBE to the Cadence training newsletter to be updated about upcoming training, webinars, and much more. If you have any questions about courses, schedules, online training, blended/virtual live training, or public, or onsite live training, reach out to us at Cadence Training .

hi,

     I save the waveform file of the oscilloscope as CSV file format.

     Now, I need to use this waveform file as the source of the low-pass filter .

     I searched and read the PSPICE help documents, and did not find any  methods. 

     How to realize it?

     Are there any reference documents or examples?

     Thanks!

Hi,

I need to design EPC8002 eGaN switch in cadence. Can someone provide me step by step guide on hoe to add EPC8002 into my cadence. I am working on BCD180.

Thank you 

Ihsan

Designers have long recognized the need to analyze the reliability of ICs. Two commonly used approaches for performing reliability analysis include calculating the change in device degradation and relying on safe operating checks in circuit simulators. 

With the advent of the ever-increasing use of ICs in mission-critical applications, the need for reliable reliability analysis has become of paramount importance. Over the years, you have been using reliability analysis in Virtuoso ADE Assembler and Virtuoso ADE Explorer to measure and review aging effects, such as device characteristic degradations, model parameter changes, self-heating effects, and so on.

Reliability analysis can be performed using two modes: Spectre native and RelXpert. The reliability analysis analyzes the effect of time on circuit performance drift and predicts the reliability of designs in terms of performance. In ADE Assembler, you can run the reliability simulation for fresh test (when time is zero), stress test (to generate degradation data), and aged test (at specific intervals, such as one year, three years, or 10 years). In the stress test, extreme environmental conditions are used to stress devices before aging analysis.

The following figure shows the reliability simulation flow.

The Reliability Options form has the following four tabs: 

• Basic: Enables you to specify analysis type, aging options, start and stop time of reliability simulation, and options related to device masking, degradation ratio, and lifetime calculation. 

• Modeling: Enables you to choose the modeling type you want to use during reliability simulation. 

• Degradation: Enables you to specify the options to print device and subcircuit degradation information into a .bt0 file. 

• Output: Enables you to specify the degradation reports to be generated and methods to filter degradation results in the reports.

While the Basic and the Output tabs are used by design engineers, the Modeling and the Degradation tabs are primarily used by model developers.

Reviewing degradation reports in text or XML formats can be a tiresome exercise because degradation data can be large and can contain a large number of instances due to advanced technology nodes and post-layout simulations. For you to work effectively and interactively with these reports, the new reliability report is based on the SQLite database, which adds the benefit of improved performance and capabilities of sorting and filtering reliability data using SQLite operators.

As they say, watching this in action might help you more than reading about it, so please take a look at our Training Bytes video channel, which offers many helpful videos on how to run Reliability Analysis in Virtuoso Studio.

All the related videos are linked together in a channel so that you can easily access and watch as many as you like.

Reliability Analysis in Virtuoso Studio

Want to Learn More?

For lab instructions and a downloadable design, enroll for the online training courses of your interest on

Reliability Analysis in Virtuoso Studio vIC23.1 (Online)

 Training is also available as "Blended" or "live" class.

Digital Badge Available

You can become Cadence Certified once you complete the course (s) and share your knowledge and certifications on social media channels. Go straight to the course exam at the Learning and Support Portal.

Note: Some of the above links are accessible only to Cadence customers who have a valid login ID for the Cadence Learning and Support Portal.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID in order to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up-to-date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Niyati Singh

On behalf of the Cadence Training team

During a mixed-signal simulation, the analog engine usually dominates the simulation time and resources. If you need to run only the analog engine in several windows, or if you would like to to run multiple tests of the same circuit with different stimuli or test pattern, then you need to run the simulation multiple times. View this blog to know more about the the two advanced technologies that Spectre AMS Designer provides to help you improve the efficiency of your mixed-signal designs and to increase the simulation speed.(read more)

Read this blog to know how you can easily create and insert connect modules using Spectre AMS Designer with the Verilog-AMS standard language defined by Accellera. (read more)

This blog explores how Virtuoso Studio Net Tracer can help you perform a design review.

We’ll use the net connectivity option, which allows the user to get a clean highlighted net. You can use the Net Tracer tool to highlight the nets. You can find the Net Tracer command under the connectivity pulldown menu in the layout window.

Trace manager and the ability to display different islands on the same net with other colors, you can identify and connect the unconnected islands as you wish.

The Net Tracer utility traces the nets in the physical view (layout). The trace is a highlighted net, which is a non-selectable object. The Net Tracer utility is available from Virtuoso Layout Suite XL onwards. You can use this utility based on your specific needs and preferences.

For a better understanding of the Net Tracer feature, let’s see one scenario between the circuit designer and layout engineer for a layout design review.

Circuit designer: Can we go through the routed input nets “inm” and “inp”?

Layout engineer: From the below layout view where they are highlighted using the XL connectivity, today I will use Net Tracer utility for the design review.

Circuit designer: I have never heard of this feature. Let's see how it works.

Layout engineer: Sure, now we turn on the Net Tracer toolbar using the below option.

You see the Net Tracer options form here:

As you can see on my screen, I have opened the layout view and engaged the Net Tracer utility.

Net Tracer allows shapes to be traced on a net in two tracing modes, namely, physical and logical, where shapes on the same net are physically or logically connected.

Physical tracing gathers all the shapes physically connected on the same net.

Logical tracing gathers all the shapes assigned to the same net. It highlights the net as in the source design (schematic). It will highlight shapes on the same net, even if they are isolated shapes that are not physically connected.

For this scenario, let us use physical tracing for input nets “inm” and “inp."

Highlighted nets are shown below:

Net “inm”                    Net “inp”                   Nets “inm” and “inp” 

Net Tracer has features like physical and logical tracing, preview, step-by-step mode, ease of tracing a net on a shape out of multiple underlying shapes, and so on.

Let us explore logical tracing for output nets “outm” and “outp”:

Here, you can see how to enable true color and halo before enabling logical tracing to identify the metal route. After enabling the true color halo, enable the logical trace.

Here, I am opening the trace manager to search “outm” and “outp” and click trace. That will trace the particular nets as shown.

Net Tracer has a preview feature, which is helpful in terms of the number of previewed objects. This preview capability hints at how the trace would appear when you create it. This useful feature in Virtuoso Studio highlights both completed and incomplete nets, helping the user better understand the status of the highlighted nets.

Circuit designer: Thanks for the design review. You have done good work. Net Tracer clearly shows both types of tracing, and it was even easy for the circuit designer to understand.

Layout engineer: Let me share the link to the Net Tracer RAK, where other layout engineers can explore many more amazing features of the Net Tracer.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up to date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

For any questions, general feedback, or future blog topic suggestions, please leave a comment.

Become Cadence Certified

Cadence Training Services now offers digital badges for this training course. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can highlight your expertise by adding these digital badges to your email signature or any social media platform, such as Facebook or LinkedIn. To become Cadence Certified, you can find additional information here.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Sandhya.

On behalf of the Cadence Training team

As the title suggests I am unable to perform design sync between OrCAD Capture and Allegro. When I add a layout and try to sync to it I am given ERROR(ORCAP-2426): Cannot run Design Sync because of errors. See session log for error details.

Session Log

[ORPCBFLOW] : Invoking ECO dialog.
INFO(ORNET-1176): Netlisting the design
INFO(ORNET-1178): Design Name:
C:USERSDDOYLEDOCUMENTSCADENCEBOARDSREMOTE POWER DEVICECAPTUREREMOTE_POWER_DEVICE.DSN
Netlist Directory:
c:usersddoyledocumentscadenceoards emote power devicelayoutallegro
Configuration File:
C:CadenceSPB_17.4 ools/capture/allegro.cfg
pstswp.exe - pst - d "C:USERSDDOYLEDOCUMENTSCADENCEBOARDSREMOTE POWER DEVICECAPTUREREMOTE_POWER_DEVICE.DSN"- n "c:usersddoyledocumentscadenceoards emote power devicelayoutallegro" - c "C:CadenceSPB_17.4 ools/capture/allegro.cfg" - v 3 - l 31 - s "" - j "PCB Footprint" - hpath "HPathForCollision"
Spawning... pstswp.exe - pst - d "C:USERSDDOYLEDOCUMENTSCADENCEBOARDSREMOTE POWER DEVICECAPTUREREMOTE_POWER_DEVICE.DSN"- n "c:usersddoyledocumentscadenceoards emote power devicelayoutallegro" - c "C:CadenceSPB_17.4 ools/capture/allegro.cfg" - v 3 - l 31 - s "" - j "PCB Footprint" - hpath "HPathForCollision"
{ Using PSTWRITER 17.4.0 d001Dec-14-2021 at 09:00:49 }

INFO(ORCAP-36080): Scanning netlist files ...

Loading... c:usersddoyledocumentscadenceoards emote power devicelayoutallegropstchip.dat

Loading... c:usersddoyledocumentscadenceoards emote power devicelayoutallegropstchip.dat

Loading... c:usersddoyledocumentscadenceoards emote power devicelayoutallegropstxprt.dat

Loading... c:usersddoyledocumentscadenceoards emote power devicelayoutallegropstxnet.dat
packaging the design view...
Exiting... pstswp.exe - pst - d "C:USERSDDOYLEDOCUMENTSCADENCEBOARDSREMOTE POWER DEVICECAPTUREREMOTE_POWER_DEVICE.DSN"- n "c:usersddoyledocumentscadenceoards emote power devicelayoutallegro" - c "C:CadenceSPB_17.4 ools/capture/allegro.cfg" - v 3 - l 31 - s "" - j "PCB Footprint" - hpath "HPathForCollision"
INFO(ORNET-1179): *** Done ***

This issue started to occur after I changed parts that exist on previously created PCBs. I changed the following leading up to this:

1. Added height in Allegro to many of my components using the Setup->Area->Package Height tool.

2. Changed the reference designator category in OrCAD Capture to TP for several components on board.

Any advice here would be most welcome. Thanks!

Hi All

I followed tutorial video below for using Design link

https://www.youtube.com/watch?v=f9JmFF8lqA0

and I followed the video with embedded board design file which should be same one on video

I did every set. but  at 2:55 of video, Steve have the tabs of both design names on top of Constraint Manager in video

but my one didn't exist them

which one would be different?

there was some comment on command windows but I think they would not be problem here

regard

Hi

I have a rather strange question - is there a way to tell layout XL to NOT place the error/warning markers on a design when I open a cell?  I do a lot of my layout by using arrays from placed instances and create mosaics that completely ignore the metadata that Layout XL uses with its bindings with schematic (and instances get deleted etc. but I do like using it to generate all my pins etc.) and it's just really annoying when I open a design that I know is LVS clean and since the connectivity metadata is all screwed up (because I did not use it to actually complete the layout) I have a design that's just blinking at me at every gate, source and drain.  I typically delete them at the high level heirarchically but the second I go in and modify something and come back up it places all of them again.  I know that if I flatten all the p cells it goes away but sometimes it's nice to have that piece of metadata but that's about it.  Is there a way to "break" the features of XL like this?  I realize what a weird question this is but it's becoming more of an issue since we moved to IC 23 from IC 6 where there is no longer a layout L that I can use free from these annoyances that can't use any of the connectivity metadata.

Thanks

Chris

Hello,

I am aware of command script .svcf file that saves signals and loads them in while opening Simvision.

I am wondering, if there is a way for saving signals while we are in an interactive session and loading them next time when we open Simvision interactively.

Any ideas on how to do this?

Thank you in advance.

Swetha. C