New online training course for AXIEM EM Simulator in AWR Microwave Office is available.(read more)

The Cadence Palladium Emulation Platform is a hardware system that implements the design, accelerating its execution and verification. Itoffers the highest performance and fastest bring-up times for pre-silicon validation of billion-gate designs, using a custom processor built by Cadence.

This Palladium Introduction course is based on the Palladium 23.03 ISR4 version and covers the following modules:

• Introduction
• Palladium flow
• Running a design on the Palladium system

This course starts with an “Introduction” module that explains Palladium and other verification platforms to show its place in the big picture. It also compares Palladium with Protium and simulation and discusses its usage and limitations.

The “Palladium Flow” module includes two stages at a high level, which are Compile and Run. Then, it covers these stages in detail. First, it covers the ICE compile flow and IXCOM compile flow steps in detail. Then it explains Run, which is common for both ICE and IXCOM modes.

The third module, “Running Design on the Palladium System,” covers all the items required for running your design on the Palladium system, including:

• Software stack requirements
• Basic concepts required to understand the flow
• Compute machine requirements

In addition, this course contains labs for both the ICE and IXCOM flows with detailed steps to exercise the features provided by the Palladium system. The lab explains a practical example of multiple counters and exercising their signals for force, monitor, and deposit features, along with frequency calculation using a real-time clock. The course is available on the Cadence support page:

There is also a Digital Badge available. You will find the Badge exam opportunity when you enroll in the Online training or after you have taken the training as "live" training.

For questions and inquiries, or issues with registration, reach out to us at Cadence Training. Want to stay up to date on webinars and courses? Subscribe to Cadence Training emails. To view our complete training offerings, visit the Cadence Training website.

Related Training Bytes

• Palladium: What Are Verification Platforms
• Palladium: What Is Processor Based Emulation
• Palladium: Comparing Emulation (Z2) and Prototyping (X2)
• Palladium: What Are ICE and IXCOM Compile Flow
• Palladium: How to Process a Design to Run on Palladium
• Palladium: XCOM Compile Flow (TB+RTL to Palladium Database)
• Palladium: ICE Compile Flow (RTL to Palladium Database)
• Palladium: Legacy ICE Compile Flow
• Palladium: Cadence Software Releases for Palladium and Protium Flow
• Palladium: Setting of PATHs for Using Palladium
• Palladium: Z2 Hardware Structure (Blade and Boards)
• Palladium: What Is Sourceless and Loadless nets
• Palladium: Design Clocks
• Palladium: Step Count and Step Clock
• Palladium: Steps for Running the Design on Palladium Z2

Related Courses

• Verilog Language and Application Training
• SystemVerilog for Design and Verification
• Xcelium Simulator

Related Blogs

• Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users
• It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!
• Training Insights - Free Online Courses on Cadence Learning and Support Portal

Allegro X System Capture offers a complete ecosystem for library development. This post introduces the latest DE-HDL Library Development using System Capture course in which you learn how to create different library objects. As a librarian, you often work with numerous libraries. Your tasks include creating or modifying symbols for libraries. To use Allegro X System Capture to create a library, you can follow the steps in the following flowchart: Let’s go through each step in detail. Setting the CDS_SITE Variable Before you start library development for a new project, set the CDS_SITE system environment variable. This step is required to access libraries and other configuration files. Creating a Project in Allegro X System Capture The next step is to create a project in Allegro X System Capture. Adding a Library to the Project Symbol development consists of creating symbol graphics, electrical data, and properties used by different tools in the PCB design flow. To add a library to a project, first create a library in the Libraries pane of the Project e xplorer. Creating Library Symbols The library development process supports the creation of various types of symbols. Creating a Symbol with Multiple Views You can generate multiple views of the same symbol using the Duplicate command. For example, a discrete symbol, such as a resistor, can have multiple views, as shown in the following image: Creating a Split Symbol For advanced designs, you often need to create library symbols and break them into multiple sections to support the design process. When a symbol shows all the logical pins in the physical package, it is called a single-section or flat symbol. Many large ICs have several pins and the symbols need to fit on a single schematic page. One workaround is to use vector pin names on a symbol to reduce its size, although manufacturers prefer schematics that show each pin. You can divide these high-pin count devices into smaller pieces, where each piece is a separate version of the part. Such parts are referred to as split parts or multi-section symbols. For multi-section symbols, you can create two types of split parts—symmetrical and asymmetrical. Symmetrical Split Symbols A symmetrical split symbol has only one symbol graphic, which holds two or more identical logic symbols, each with its own unique physical pin numbers. You can create a symmetrical split symbol using the Duplicate Section icon in the canvas window. Each symbol section contains the same set of pins but different pin numbers, as shown in the following image: Asymmetrical Split Symbols An asymmetrical split symbol is a symbol whose physical package contains one or more unique schematic symbols. You can create an asymmetrical split symbol by clicking the New Section icon in the canvas window. Asymmetrical symbols have a unique set of logical pins, as shown in the following image: Creating Symbols Using the Spreadsheet Interface To simplify the development of large symbols, Allegro X System Capture has a Spreadsheet Interface . You can copy from a spreadsheet into the interface. This saves time and helps minimize errors introduced by manual entry. In conclusion, the DE-HDL library development using Allegro X System Capture course involves several critical steps and supports various symbol creation techniques. This course helps librarians create and modify symbols effortlessly and deepens their understanding of library development within Allegro X System Capture. To learn more about this topic, enroll in the DE-HDL Library Development using Allegro X System Capture course on the Cadence Support portal . Click the training byte link now or visit Cadence Support and search for training bytes under Video Library. If you find the post useful and want to delve deeper into training details, enroll in the following online training course for lab instructions and a downloadable design: DE-HDL Library Development using Allegro X System Capture (Online). You can become Cadence Certified once you complete the course. Cadence Training Services now offers free Digital Badges for all popular online training courses. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can add the digital badge to your email signature or any social media channels, such as Facebook or LinkedIn, to highlight your expertise. To find out more, see the blog post Take a Cadence Masterclass and Get a Badge . You might also be interested in the training Learning Map that guides you through recommended course flows as well as tool experience and knowledge-level training modules. To find information on how to get an account on the Cadence Learning and Support portal, see here . SUBSCRIBE to the Cadence training newsletter to be updated about upcoming training, webinars, and much more. If you have any questions about courses, schedules, online training, blended/virtual live training, or public, or onsite live training, reach out to us at Cadence Training .

If you have seen any images or demonstrations of the 17.4-2019 release, the GUI may look ...(read more)

The Allegro PCB Editor Basic Techniques course provides all the essential training required to start working with Allegro® PCB Editor. The course covers all the design tasks, including padstack and symbol creation, logic import, constraints setup...(read more)

This blog informs about the new badge certification available for Cadence Certus Closure Solution, that grants credit to your proficiency.(read more)

If I talk about my life, it was much simpler when I used to live with my parents. They took good care of whatever I wanted - in fact, they still do. But now, I am living alone, and sometimes I buy...

[[ Click on the title to access the full blog on the Cadence Community site. ]]

You must deal with many reports in your daily life – for your health, financial accounts, credit, your child’s academic records, and the count goes on. Ever noticed that these reports contain many details, most of which you don’t wa...(read more)

Imagine you are on a vacation with your family, and suddenly, your phone starts buzzing. You pick it up and what are you looking at is a bunch of pending, unanswered e-mails. You start recollecting the checklist you had made before taking off only to realize that you haven’t put on the automatic replies! (read more)

What is a Power Distribution Network (PDN) after all but resistance, inductance, and capacitance in the PCB and components? And, of course, it is there to deliver the right current and voltage to each component on your PCB. But is that all? Are there oth...(read more)

So, what if you can figure out all that can go wrong when your product is being assembled early on? Not guess but know and correct at an early stage – not wait for the fabricator or manufacturer to send you a long report of what needs to change. That’s why Design for Assembly (DFA) rules(read more)