Aleksei Chebeliuk, accompanied by a magnificent live orchestra, will perform a carefully curated selection of classical masterpieces. The repertoire will include the genius works of legends such as Chopin, Vivaldi, Beethoven, Bach, Mozart and more.

Hello,

When I draw a Fluid Guard Ring in Virtuoso, the layout is not visible, and instead, "do_something=nil" appears.

When I check the details with Q, it shows the same information as a regular NFGR guard ring, and Ctrl+F also displays the instance name, just like with a regular NFGR. 

Additionally, the Pcells of Fluid Guard Rings from previous projects appear broken. 

The version I’m currently using is not different from the one used in the past. Even when I access the same version as the one used during the project, the Pcells still appear broken.

These two issues are occurring, and I’m not sure what to check. I would greatly appreciate it if you could assist me in resolving this issue.

//

I am scripting gds streamin using 'strmin', which works fine so far.

But, as it apparently doesn't have an option to specify where the cds.lib file is, I have to run it from the directory where the cds.lib file is, or I guess I could create a dummy one to source that one.

Is there a way to tell strmin where the cds.lib file is?

Read on to know about the Operating Point Parameters Summary window that gives you a one-stop view of the categorized and tabulated details on all operating point parameters in your design. This window improves your review cycle with its many benefits.(read more)

Designers have long recognized the need to analyze the reliability of ICs. Two commonly used approaches for performing reliability analysis include calculating the change in device degradation and relying on safe operating checks in circuit simulators. 

With the advent of the ever-increasing use of ICs in mission-critical applications, the need for reliable reliability analysis has become of paramount importance. Over the years, you have been using reliability analysis in Virtuoso ADE Assembler and Virtuoso ADE Explorer to measure and review aging effects, such as device characteristic degradations, model parameter changes, self-heating effects, and so on.

Reliability analysis can be performed using two modes: Spectre native and RelXpert. The reliability analysis analyzes the effect of time on circuit performance drift and predicts the reliability of designs in terms of performance. In ADE Assembler, you can run the reliability simulation for fresh test (when time is zero), stress test (to generate degradation data), and aged test (at specific intervals, such as one year, three years, or 10 years). In the stress test, extreme environmental conditions are used to stress devices before aging analysis.

The following figure shows the reliability simulation flow.

The Reliability Options form has the following four tabs: 

• Basic: Enables you to specify analysis type, aging options, start and stop time of reliability simulation, and options related to device masking, degradation ratio, and lifetime calculation. 

• Modeling: Enables you to choose the modeling type you want to use during reliability simulation. 

• Degradation: Enables you to specify the options to print device and subcircuit degradation information into a .bt0 file. 

• Output: Enables you to specify the degradation reports to be generated and methods to filter degradation results in the reports.

While the Basic and the Output tabs are used by design engineers, the Modeling and the Degradation tabs are primarily used by model developers.

Reviewing degradation reports in text or XML formats can be a tiresome exercise because degradation data can be large and can contain a large number of instances due to advanced technology nodes and post-layout simulations. For you to work effectively and interactively with these reports, the new reliability report is based on the SQLite database, which adds the benefit of improved performance and capabilities of sorting and filtering reliability data using SQLite operators.

As they say, watching this in action might help you more than reading about it, so please take a look at our Training Bytes video channel, which offers many helpful videos on how to run Reliability Analysis in Virtuoso Studio.

All the related videos are linked together in a channel so that you can easily access and watch as many as you like.

Reliability Analysis in Virtuoso Studio

Want to Learn More?

For lab instructions and a downloadable design, enroll for the online training courses of your interest on

Reliability Analysis in Virtuoso Studio vIC23.1 (Online)

 Training is also available as "Blended" or "live" class.

Digital Badge Available

You can become Cadence Certified once you complete the course (s) and share your knowledge and certifications on social media channels. Go straight to the course exam at the Learning and Support Portal.

Note: Some of the above links are accessible only to Cadence customers who have a valid login ID for the Cadence Learning and Support Portal.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID in order to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up-to-date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Niyati Singh

On behalf of the Cadence Training team

Virtuoso Studio IC23.1 ISR7 production release is now available for download.(read more)

This blog describes an efficient way to name the histories saved by the simulation runs in Virtuoso ADE Assembler.(read more)

Virtuoso Studio IC23.1 ISR8 production release is now available for download.(read more)

This blog explores how Virtuoso Studio Net Tracer can help you perform a design review.

We’ll use the net connectivity option, which allows the user to get a clean highlighted net. You can use the Net Tracer tool to highlight the nets. You can find the Net Tracer command under the connectivity pulldown menu in the layout window.

Trace manager and the ability to display different islands on the same net with other colors, you can identify and connect the unconnected islands as you wish.

The Net Tracer utility traces the nets in the physical view (layout). The trace is a highlighted net, which is a non-selectable object. The Net Tracer utility is available from Virtuoso Layout Suite XL onwards. You can use this utility based on your specific needs and preferences.

For a better understanding of the Net Tracer feature, let’s see one scenario between the circuit designer and layout engineer for a layout design review.

Circuit designer: Can we go through the routed input nets “inm” and “inp”?

Layout engineer: From the below layout view where they are highlighted using the XL connectivity, today I will use Net Tracer utility for the design review.

Circuit designer: I have never heard of this feature. Let's see how it works.

Layout engineer: Sure, now we turn on the Net Tracer toolbar using the below option.

You see the Net Tracer options form here:

As you can see on my screen, I have opened the layout view and engaged the Net Tracer utility.

Net Tracer allows shapes to be traced on a net in two tracing modes, namely, physical and logical, where shapes on the same net are physically or logically connected.

Physical tracing gathers all the shapes physically connected on the same net.

Logical tracing gathers all the shapes assigned to the same net. It highlights the net as in the source design (schematic). It will highlight shapes on the same net, even if they are isolated shapes that are not physically connected.

For this scenario, let us use physical tracing for input nets “inm” and “inp."

Highlighted nets are shown below:

Net “inm”                    Net “inp”                   Nets “inm” and “inp” 

Net Tracer has features like physical and logical tracing, preview, step-by-step mode, ease of tracing a net on a shape out of multiple underlying shapes, and so on.

Let us explore logical tracing for output nets “outm” and “outp”:

Here, you can see how to enable true color and halo before enabling logical tracing to identify the metal route. After enabling the true color halo, enable the logical trace.

Here, I am opening the trace manager to search “outm” and “outp” and click trace. That will trace the particular nets as shown.

Net Tracer has a preview feature, which is helpful in terms of the number of previewed objects. This preview capability hints at how the trace would appear when you create it. This useful feature in Virtuoso Studio highlights both completed and incomplete nets, helping the user better understand the status of the highlighted nets.

Circuit designer: Thanks for the design review. You have done good work. Net Tracer clearly shows both types of tracing, and it was even easy for the circuit designer to understand.

Layout engineer: Let me share the link to the Net Tracer RAK, where other layout engineers can explore many more amazing features of the Net Tracer.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up to date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

For any questions, general feedback, or future blog topic suggestions, please leave a comment.

Become Cadence Certified

Cadence Training Services now offers digital badges for this training course. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can highlight your expertise by adding these digital badges to your email signature or any social media platform, such as Facebook or LinkedIn. To become Cadence Certified, you can find additional information here.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Sandhya.

On behalf of the Cadence Training team

Virtuoso Studio IC23.1 ISR9 production release is now available for download.(read more)

Virtuoso Studio IC23.1 ISR10 production release is now available for download.(read more)

I want to use PSpice model (download from TI) in Virtuoso , but it can not work. Please help me to check the error message, Thanks

ADE-> Setup-> simulation files->Pspice  Files  /TPS628502-Q1_TRANS.LIB

Parse error before token ']' in expression '[[STEADY_STATE]*0.6]'. If '[[STEADY_STATE]*0.6]'  is a spice expression, quotes are required for the expression.

ERROR(SFE-46): An instance of 'TPS628502-Q1_TRANS'  can have at most 8 terminals (but has 9).

*****************************************************************************
.SUBCKT TPS628502-Q1_TRANS COMP_FSET EN FB GND PG SW SYNC_MODE VIN
+ PARAMS: STEADY_STATE=0
V_U9_V45 U9_N16725824 0 5
E_U9_ABM22 U9_N16725392 0 VALUE { V(FREQ)*1e-12 }
X_U9_U161 U9_N16849713 U9_N16846056 one_shot PARAMS: T=20

Hi

I have a rather strange question - is there a way to tell layout XL to NOT place the error/warning markers on a design when I open a cell?  I do a lot of my layout by using arrays from placed instances and create mosaics that completely ignore the metadata that Layout XL uses with its bindings with schematic (and instances get deleted etc. but I do like using it to generate all my pins etc.) and it's just really annoying when I open a design that I know is LVS clean and since the connectivity metadata is all screwed up (because I did not use it to actually complete the layout) I have a design that's just blinking at me at every gate, source and drain.  I typically delete them at the high level heirarchically but the second I go in and modify something and come back up it places all of them again.  I know that if I flatten all the p cells it goes away but sometimes it's nice to have that piece of metadata but that's about it.  Is there a way to "break" the features of XL like this?  I realize what a weird question this is but it's becoming more of an issue since we moved to IC 23 from IC 6 where there is no longer a layout L that I can use free from these annoyances that can't use any of the connectivity metadata.

Thanks

Chris

I have been involved in the Virtuoso RF Solution for the last four years. Most of the customers I work with have a SiP package already in progress. They often ask "How do I get my SiP design into Virtuoso RF Solution?" I am excited about new functionality in the latest ICADVM20.1 ISR25 release. It is a new GUI under the Tools menu called Enablement. (read more)

The ICADVM20.1 ISR26 and IC6.1.8 ISR26 production releases are now available for download.(read more)

This blog describes how to efficiently use Virtuoso Visualization and Analysis XL.(read more)

In my last blog, Getting Your Existing SiP File Into Virtuoso RF, I talked about the new enhancements in ICADVM20.1 ISR25 for Virtuoso RF Solution. At the end of the blog, I told you about the Fully Assisted Roundtrip flow, which includes importing SiP files that are compatible with the Virtuoso RF Solution assisted import flow into the Virtuoso platform. Let's examine how the Fully Assisted Roundtrip flow works in this blog.(read more)

The ICADVM20.1 ISR27 and IC6.1.8 ISR27 production releases are now available for download.(read more)

This blog helps in demonstrating the use of Pin to trunk routing style which helps in enhancing the layout experience.(read more)

The world of electronics design thrives on efficient tools that bridge the gap between concept and silicon. Virtuoso Digital Implementation is a powerful ally for mixed-signal designs, which integrate both analog and digital components. This blog post will examine Virtuoso Digital Implementation's capabilities and explore how it can streamline your mixed-signal design workflow.

Virtuoso Digital Implementation in a Nutshell

Virtuoso Digital Implementation is a license package within the Cadence Virtuoso Design Platform. It offers a streamlined RTL-to-GDSII flow to implement smaller digital blocks within a mixed-signal design environment. Here's what makes Virtuoso Digital Implementation stand out:

• Focus on Small Digital Blocks: Optimized for digital blocks with an instance count of up to 50,000 (expandable to 150,000 with specific configurations), Virtuoso Digital Implementation is ideal for integrating digital logic into your analog-centric design.
• Leveraging Industry Leaders: Virtuoso Digital Implementation utilizes cut-down versions of the renowned Cadence Genus Synthesis Solution and Innovus Implementation System under the hood. This ensures you get access to proven technologies for logic optimization and place-and-route.
• Seamless Integration with the Virtuoso Environment: Virtuoso Digital Implementation's key advantage is its tight integration with the Virtuoso Layout Suite. You can launch the synthesis and place-and-route tools directly from the Virtuoso environment, eliminating the need to switch between platforms.

Benefits of Using Virtuoso Digital Implementation

 By incorporating Virtuoso Digital Implementation into your mixed-signal design flow, you can get several benefits:

• Simplified Workflow: Virtuoso Digital Implementation offers a centralized environment for both digital block implementation and layout editing within the Virtuoso environment. This reduces context switching and streamlines the design process.
• Faster Time-to-Market: Virtuoso Digital Implementation's streamlined workflow can significantly reduce design turnaround times, allowing you to get your product to market quicker.
• Improved Design Quality: Leveraging industry-leading synthesis and place-and-route engines from Cadence ensures high-quality digital block implementation within your mixed-signal design.

Who Should Consider Virtuoso Digital Implementation?

 Virtuoso Digital Implementation is a valuable tool for anyone working on mixed-signal designs with smaller digital blocks. It's particularly well-suited for:

• Analog IC designers who need to integrate digital logic into their designs.
• Circuit design teams working on mixed-signal applications like data converters, power management ICs, and RF transceivers.

Virtuoso Digital Implementation provides a compelling solution for designers working on mixed-signal projects. Its streamlined workflow, tight integration with the Virtuoso design platform, and access to proven digital design tools can significantly improve design efficiency and time-to-market. Virtuoso Digital Implementation is worth considering if you're looking to optimize your mixed-signal design flow.

I am here to help and guide you on how to learn more about Virtuoso Digital Implementation flow.

Welcome to Virtuoso Digital Implementation, an online course recently released. This course teaches implementing digital blocks using Cadence tools based on the Virtuoso Digital Implementation flow. Also, you can download a lab database after the lecture and get hands-on experience in each stage.

Want to Enroll in this Course?

We organize this Virtuoso Digital Implementation training for you as a "Blended" or "Live" training. Please reach out to Cadence Training for further information.

Register for the Online Training with the following steps:

• Log on to cadence.com with your registered Cadence ID and password.
• Select Learning from the menu > Online Courses.
• Search for Virtuoso Digital Implementation using the search bar.
• Select the course and click Enroll.

And don't forget to obtain your Digital Badge after completing the training!

Related Resources

Online Courses

• Cadence RTL-to-GDSII Flow v6.0
• Virtuoso Digital Implementation Training

Training Byte Videos

• How Do You Run Placement Optimization in the Innovus Implementation System?
• How to Run the Synthesis Without DFT?
• How to Run the Synthesis Flow with DFT?
• Creating Power Rings, Power Stripes, and Power Rails in the Innovus Implementation System
• How to Run Power Analysis and Analyze the Results in Innovus?

Happy Learning!

Legal Internships, Interview for legal Internships, Tips to successfully land a legal internship. Internship for law students, interview for law internships.

Hello,

I created a floorplan view in Virtuoso ( it contains pins and blockages). I am trying to run PnR in Innovus for floorplan created in Virtuoso. I used  set vars(oa_fp)    "Library_name cell_name view_name"   to read view from virtuoso. I am able to see pins in Innovus but not the blockages. Can i know how do i get the blockages created in virtuoso to Innovus.

Regards,
Amuu 

I'm trying to generate IBIS models for the parts that I'm designing.  I'm designing using CADENCE Virtuoso.  

I'm wondering if there is a tutorial for generating IBIS models in CADENCE Virtuoso.   Please pardon me if my question is broad.      

Hello, i have a realy mistick thing going with copying libraries in cadence virtuoso,

When i copy straight forwart the whole library it gives me a warning that accsess was denied,but when i go into the library and copy it as a single file, then it goes fine.

another problem is it doesnt show in the massage console  ALL the files which could not be copied.(which is the much bigger problem,becuase i would have to pass threw all the subdirectories to verify if all files are there)

Is there a way to see which files wasnt able to be copied?

Thanks. 

Hello , i am trying to extract netlist from a circuit  in assembler

I have found the manual shown bellow , however there is no such option in tools in assembler.

how do i view the NETLIST of this circuit?

Thanks.

ASSEMBLER VIEW menu

Hello, I have a problem with a certain type of transistor,my hyrarchy has a lot components an sub components and visually inspecting them is very hard.

is there a way like in other cadence layout viewer tools , to enter the name of the component or a NET somewhere and it will focus on it visualy or give the hyrarchy path to it?

Thanks.

Hello, i am trying to produce a gain circles on a simple transistor as shown bellow.

i have defined the range from 1 til 30 dB and i dont get any circle just dots in infinity?

Where did i go wrong?
Thanks.

Hello, i have built a matching network of 13dB gain and  NF as shown bellow step by step.(including all the plots and matlab )

its just not working at all,i am doing it exacly by the thoery

taking a point inside the circle-> converting its gamma to Z_source->converting gamma_s into gamma_L with the formulla bellow as shown in the matlab->converting the gamma_L into Z_L-> building the matching network for conjugate of Z_L and Z_c.Its just not working.

where did i got  wrong?

Thanks.

gamma_s=75.8966*exp(deg2rad(280.88)*i);
z_s=gamma2z(gamma_s,50);
s11=0.99875-0.03202*i
s12=721.33*10^(-6)+8.622*10^(-3)*i
s21=-188.37*10^(-3)+30.611*10^(-3)*i
s22=875.51*10^(-3)-100.72*10^(-3)*i
gamma_L=conj((s22+(s12*s21*gamma_s)/(1-s11*gamma_s)))
z_L=gamma2z(gamma_L,50)

Hello, There is a manual in matlab of matching LNA  shown in the link bellow.

In it as shown in the plot bellow they mention input and output circle plots.

Is there such option of input and output circle in cadence virtuoso?

https://www.mathworks.com/help/rf/examples/designing-matching-networks-part-1-networks-with-an-lna-and-lumped-elements.html

For a project, we depend on capturing warnings. This works fine in Virtuoso but behaves differently in Allegro.

In our observations

Virtuoso:

>>> warn("Hello")

*WARNING* Hello

Allegro:

>>> warn("Hello")

*WARNING* Hello

But when we capture the warning:

Virtuoso:

>>> warn("Hello") getWarn()

"Hello"

Allegro:

>>> warn("Hello") getWarn()

"*WARNING* Hello"

This is a Problem for because we put an empty String in the warn and depend on the fact that no Warning results in an empty String but on Allegro the output always begins with *WARNING*

Is there a way to make the behavior consistent in both versions?

Hi all,

Is there any tutorial which explains the process of plotting the ISF function for a certain oscillator ?

Thank you.

Hi ,

     I have designed analog IP in cadence ADE and simulated in spectre. All corner results looks good. when i run monte carlo 1000 runs have high current in 125C two runs. Simulated with same setup in different user, all clean.Need to know what type sampling method used and why its not clean with my setup.

Thanks,

Anbarasu

Bumps are central to the Virtuoso MultiTech Framework solution. Bumps provide a connection between stacked ICs, interposers, packages, and boards. Bump locations, connectivity, and other attributes are the basis for creating TILPs, which we combine to create system-level layouts.(read more)

Here is another blog in the multi-part series that aims at providing in-depth details of electromagnetic analysis in the Virtuoso RF solution. Read to learn about the nuances of port setup for electromagnetic analysis.(read more)

The IC6.1.8 ISR10 and ICADVM18.1 ISR10 production releases are now available for download.(read more)

If you have one of those Die layouts, which doesn’t have bumps, but rather uses pad shapes and labels to identify I/O locations, then you might be feeling a bit left out of all of this jazz and tango. Hence, today, I am writing to tell you that, fear not, we have a solution for your Die as well.(read more)

We have all heard the sayings “Less is more” and “Keep it simple”. Electromagnetic simulation is an activity where following that advice has enormous payoffs. In this blog I’ll talk about some of my experiences with how Virtuoso RF Solution’s shape simplification feature has helped my customers get significant performance improvements with minimal impacts on accuracy. (read more)

Hello everyone, today I’d like to talk to you about the recent enhancements to Die export in the Virtuoso RF Solution, most of which were released in ICADVM 18.1 ISR10. What’s the background for these enhancements? Exporting an abstract of a Die, which basically represents the outer boundary of the Die with I/O locations, as an intermediate file to exchange information between various Cadence tools (i.e., the Innovus, Virtuoso, and Allegro platforms) is not a new feature. This capability existed even prior to the Virtuoso RF Solution. However, the entire functionality was rewritten from scratch when we first started developing the Virtuoso RF Solution because the previous feature was deemed archaic, its performance and capacity needed to be enhanced, and use model needed to be modernized. This effort has been made in various phases, with the last round being completed and released in ICADVM18.1 ISR10.(read more)