Read on to know about the Operating Point Parameters Summary window that gives you a one-stop view of the categorized and tabulated details on all operating point parameters in your design. This window improves your review cycle with its many benefits.(read more)

Designers have long recognized the need to analyze the reliability of ICs. Two commonly used approaches for performing reliability analysis include calculating the change in device degradation and relying on safe operating checks in circuit simulators. 

With the advent of the ever-increasing use of ICs in mission-critical applications, the need for reliable reliability analysis has become of paramount importance. Over the years, you have been using reliability analysis in Virtuoso ADE Assembler and Virtuoso ADE Explorer to measure and review aging effects, such as device characteristic degradations, model parameter changes, self-heating effects, and so on.

Reliability analysis can be performed using two modes: Spectre native and RelXpert. The reliability analysis analyzes the effect of time on circuit performance drift and predicts the reliability of designs in terms of performance. In ADE Assembler, you can run the reliability simulation for fresh test (when time is zero), stress test (to generate degradation data), and aged test (at specific intervals, such as one year, three years, or 10 years). In the stress test, extreme environmental conditions are used to stress devices before aging analysis.

The following figure shows the reliability simulation flow.

The Reliability Options form has the following four tabs: 

• Basic: Enables you to specify analysis type, aging options, start and stop time of reliability simulation, and options related to device masking, degradation ratio, and lifetime calculation. 

• Modeling: Enables you to choose the modeling type you want to use during reliability simulation. 

• Degradation: Enables you to specify the options to print device and subcircuit degradation information into a .bt0 file. 

• Output: Enables you to specify the degradation reports to be generated and methods to filter degradation results in the reports.

While the Basic and the Output tabs are used by design engineers, the Modeling and the Degradation tabs are primarily used by model developers.

Reviewing degradation reports in text or XML formats can be a tiresome exercise because degradation data can be large and can contain a large number of instances due to advanced technology nodes and post-layout simulations. For you to work effectively and interactively with these reports, the new reliability report is based on the SQLite database, which adds the benefit of improved performance and capabilities of sorting and filtering reliability data using SQLite operators.

As they say, watching this in action might help you more than reading about it, so please take a look at our Training Bytes video channel, which offers many helpful videos on how to run Reliability Analysis in Virtuoso Studio.

All the related videos are linked together in a channel so that you can easily access and watch as many as you like.

Reliability Analysis in Virtuoso Studio

Want to Learn More?

For lab instructions and a downloadable design, enroll for the online training courses of your interest on

Reliability Analysis in Virtuoso Studio vIC23.1 (Online)

 Training is also available as "Blended" or "live" class.

Digital Badge Available

You can become Cadence Certified once you complete the course (s) and share your knowledge and certifications on social media channels. Go straight to the course exam at the Learning and Support Portal.

Note: Some of the above links are accessible only to Cadence customers who have a valid login ID for the Cadence Learning and Support Portal.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID in order to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up-to-date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Niyati Singh

On behalf of the Cadence Training team

Virtuoso Studio IC23.1 ISR7 production release is now available for download.(read more)

This blog describes an efficient way to name the histories saved by the simulation runs in Virtuoso ADE Assembler.(read more)

Virtuoso Studio IC23.1 ISR8 production release is now available for download.(read more)

This blog explores how Virtuoso Studio Net Tracer can help you perform a design review.

We’ll use the net connectivity option, which allows the user to get a clean highlighted net. You can use the Net Tracer tool to highlight the nets. You can find the Net Tracer command under the connectivity pulldown menu in the layout window.

Trace manager and the ability to display different islands on the same net with other colors, you can identify and connect the unconnected islands as you wish.

The Net Tracer utility traces the nets in the physical view (layout). The trace is a highlighted net, which is a non-selectable object. The Net Tracer utility is available from Virtuoso Layout Suite XL onwards. You can use this utility based on your specific needs and preferences.

For a better understanding of the Net Tracer feature, let’s see one scenario between the circuit designer and layout engineer for a layout design review.

Circuit designer: Can we go through the routed input nets “inm” and “inp”?

Layout engineer: From the below layout view where they are highlighted using the XL connectivity, today I will use Net Tracer utility for the design review.

Circuit designer: I have never heard of this feature. Let's see how it works.

Layout engineer: Sure, now we turn on the Net Tracer toolbar using the below option.

You see the Net Tracer options form here:

As you can see on my screen, I have opened the layout view and engaged the Net Tracer utility.

Net Tracer allows shapes to be traced on a net in two tracing modes, namely, physical and logical, where shapes on the same net are physically or logically connected.

Physical tracing gathers all the shapes physically connected on the same net.

Logical tracing gathers all the shapes assigned to the same net. It highlights the net as in the source design (schematic). It will highlight shapes on the same net, even if they are isolated shapes that are not physically connected.

For this scenario, let us use physical tracing for input nets “inm” and “inp."

Highlighted nets are shown below:

Net “inm”                    Net “inp”                   Nets “inm” and “inp” 

Net Tracer has features like physical and logical tracing, preview, step-by-step mode, ease of tracing a net on a shape out of multiple underlying shapes, and so on.

Let us explore logical tracing for output nets “outm” and “outp”:

Here, you can see how to enable true color and halo before enabling logical tracing to identify the metal route. After enabling the true color halo, enable the logical trace.

Here, I am opening the trace manager to search “outm” and “outp” and click trace. That will trace the particular nets as shown.

Net Tracer has a preview feature, which is helpful in terms of the number of previewed objects. This preview capability hints at how the trace would appear when you create it. This useful feature in Virtuoso Studio highlights both completed and incomplete nets, helping the user better understand the status of the highlighted nets.

Circuit designer: Thanks for the design review. You have done good work. Net Tracer clearly shows both types of tracing, and it was even easy for the circuit designer to understand.

Layout engineer: Let me share the link to the Net Tracer RAK, where other layout engineers can explore many more amazing features of the Net Tracer.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up to date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

For any questions, general feedback, or future blog topic suggestions, please leave a comment.

Become Cadence Certified

Cadence Training Services now offers digital badges for this training course. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can highlight your expertise by adding these digital badges to your email signature or any social media platform, such as Facebook or LinkedIn. To become Cadence Certified, you can find additional information here.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Sandhya.

On behalf of the Cadence Training team

Virtuoso Studio IC23.1 ISR9 production release is now available for download.(read more)

Virtuoso Studio IC23.1 ISR10 production release is now available for download.(read more)