The Delaware Department of Agriculture is urging farmers to participate in the two major mid-year surveys, the June Agricultural Survey and the June Area Survey, conducted by USDA’s National Agricultural Statistics Service (NASS). NASS will survey nearly 400 farmers across Delaware to determine crop production and supply levels in 2017. “As an $8 billion industry, agriculture plays a major role in Delaware’s economy,” said Secretary of Agriculture Michael Scuse. “The information that our farmers provide is critical to helping everyone – from fellow farmers to lawmakers to extension professionals – make decisions that will impact our industry. It is critical that NASS has the most accurate data, so I urge Delaware farmers to participate in the June Surveys.”

Delaware Secretary of Agriculture Michael Scuse is reminding farmers to complete the small grain production survey that has been sent out to nearly 300 producers by the USDA’s National Agricultural Statistics Service (NASS). The agency is taking a comprehensive look into the 2017 production and supply of small grains, which include wheat, oats, barley, and rye. 

During the next several weeks, U.S. Department of Agriculture’s National Agricultural Statistics Service (NASS) will conduct two major mid-year surveys, the June Agricultural Survey and the June Area Survey. The agency will contact around 350 producers across Delaware to determine crop acreage and stock levels as of June 1, 2018.

As the 2018 growing season officially comes to an end, the U.S. Department of Agriculture’s National Agricultural Statistics Service (NASS) will contact producers in Delaware to gather final year-end crop production numbers and the amount of grain and oilseeds they store on their farms. At the same time, NASS will survey grain facility operators to determine year-end grain and oilseed stocks.

About 1 in 6 Americans gets sick every year from foodborne illnesses. Under the Food Safety Modernization Act (FSMA), FDA and the USDA work closely to trace the cause and origin of these illnesses. Traceability is key so the origin is quickly detected, and a recall enacted, preventing others from becoming ill. Preparation and planning are necessary for produce growers and businesses in the supply chain to successfully navigate a product recall. The Delaware Department of Agriculture’s Produce Safety Program will present the United Fresh Recall Ready Workshop on January 22, 2020 at Dover Downs from 8 a.m. to 5 p.m.

Many of us are currently working from home and getting adjusted to this new way of working. If you’re an employee working on the shop floor of a manufacturing facility, however, working from home is not an option. Among the many hard decisions manufacturing leaders have had to make during [...]

Increase employee safety with production planning optimization  was published on SAS Voices by Chris Hartmann

The Delaware Division of Public Health (DPH) is advising Delawareans of a multistate outbreak of Listeria infections linked to deli ham. Several companies have recalled ham products that could be contaminated with Listeria monocytogenes bacteria and could make people sick.

The Division of Public Health (DPH) is advising Delawareans of a multi-state outbreak of Salmonella Reading infections linked to raw turkey products. According to the CDC, 164 people infected with the outbreak strain of Salmonella Reading have been reported in 35 states, including one person in Delaware. Of the cases reported nationally, 63 people have been hospitalized. No Delawareans have been hospitalized.

Protecting the Health of our Young People, and our State’s Future, by Raising the Minimum Sales Age of Tobacco Products from 18 to 21 Op-ed by Karyl T. Rattay, MD, MS, Director, Division of Public Health, Delaware Department of Health and Social Services It’s a fact that most smokers start using tobacco as youth: Eighty-nine […]

The Delaware Division of Public Health (DPH) is reminding Delawareans to avoid consuming raw dairy products as it announces a confirmed case of brucellosis caused by Brucella melitensis in a 46-year-old Sussex County woman.

Specific steps will be taken to keep the workforce healthy and organisational provisions to prevent the spread of COVID-19 in the workplace. Production at our three Skoda Auto Czech sites has been suspended since 18 March 2020.

Volkswagen has shared this 100-point plan with its more than 40,000 suppliers and logistics partners throughout the world.

The Bee Apiary at Rolls-Royce was opened in the year 2017 and the six hives are christened quite interestingly as these are named as Phantom, Wraith, Dawn, Cullinan, Ghost and Spirit of Ecstasy.

Operations at the Ferrari factories in Maranello and Modena will resume after the tragic coronavirus lockdown in Italy.

In order to ensure a safer workplace environment, BMW Chennai plant has implemented several precautionary measures including remodelling of plant layout, individual protective gear for all employees and more.

Hyundai Motor India claims that it is ensuring 100 percent social distancing compliance in accordance with the standard operating procedure. 

Earlier in April, Ferrari had started to produce respirator valves and fittings for protective masks at its Maranello plant as one of its initiatives in support of health workers treating coronavirus patients.

Department of Natural Resources and Environmental Control Secretary Shawn M. Garvin announced today that the Department has granted approval to Croda, Inc. to resume ethylene oxide (EO) production at the company’s Atlas Point facility. Croda received DNREC approval by fulfilling its obligations to improve safety at the facility through actions required by DNREC’s accidental release program. DNREC issued its requirements after investigating the Nov. 25, 2018 accidental release of EO, the volatile chemical substance used in the manufacturing of Croda’s products.

The union said it was unfair to direct BSNL alone to buy local 4G equipment, largely untested and of substandard quality, from inexperienced companies while letting private operators buy from global players.

These channel partnerships have been done in a phased manner, with Flipkart being the first e-commerce platform to enable the availability of its essential products in Mumbai, Bengaluru and Delhi.

The United States is on track to cut 1.7 million barrels of oil production per day, according to Reuters calculations of state and company data shared on Thursday.
Read Full Article at RT.com

  Too many distractions can bring down your productivity, but so can boredom, a whole pile of brainless and repetitive tasks and so on and so forth. Here we’ve compiled a list of apps and Chrome e...

The agricultural output in the economy grew by 3.5% in the third quarter (Q3) of FY20, against 3.1% in Q2 of FY20.

The Volvo XC90 SUV presented this week is the first production car that in combination with Uber’s self-driving system is capable of fully driving itself.

Technology will play a crucial role in developing the EV ecosystem including in design, simulation, manufacturing and developing the overall vehicle cycle.

Manufacturers have been told to commence production before July 31, 2020.

A fully Keynesian approach will need to be taken by the government. People are losing jobs and production activity has come to a standstill due to the lockdown.

Amber Solutions, an IoT product company that sells smart outlets, switches and circuit breakers closed Series A Preferred Stock round of financing that equals $3.3M in gross proceeds. Amber will use the funds to support the commercial development of Amber's core technologies.

One of Amber’s product is solid-state circuit interrupter (GFCI) that basically stops harmful levels of electricity from passing through a person. It operates as a safety device alerting the homeowner of electrocution incidents in real time.

Amber Solutions’ core markets are builders that prepare smart home/smart building ready infrastructure, certified electrical contractors or remodelers, and electrical manufacturers.

Other latest funding news include Owlet’s $24M Series B, Axonize’s $6M Series A round and addition of Deutsche Telekom as its strategic investor, and $30M Series B raised by Palo Alto-based Armis.

Arduino’s MKR family of products got two new wireless connectivity boards added to its range of products. These include MKR WiFi 1010 and MKR NB 1500, both aimed at streamlining IoT product/service development.

Arduino’s blog notes that “the Arduino MKR WiFi 1010 is the new version of the MKR1000 with ESP32 module on board made by U-BLOX.”

MKR WiFi 1010: For prototyping of WI-FI based IoT applications

The core difference of MKR WiFi 1010 compared to MKR WiFi 1000 is that the former can be put to use in production-grade IoT apps and it has ESP32-based module manufactured by u-blox. The former enables to add 2.4GHz WiFi and Bluetooth capability to the application. Additionally, it comes with a programmable dual-processor system (an ARM processor and a dual-core Espressif IC).

MKR NB 1500: For on-field monitoring systems and remote-controlled LTE-enabled modules

The Arduino MKR NB 1500 is based on new low-power NB-IoT (narrowband IoT) standard. This makes it appropriate for IoT apps running over cellular/LTE networks.

Key use cases of this board are remote monitoring systems and remote-controlled LTE-enabled modules. It supports AT&T, T-Mobile USA, Telstra, Verizon over the Cat M1/NB1 deployed bands 2, 3, 4, 5, 8, 12, 13, 20 and 28.

Arduino also pitches this board to be used in IoT apps which used to rely on alternative IoT networks such as LoRa and Sigfox. It promises to save power compared to GSM or 3G cellular-based connections.

The PCI-SIG finalized the PCIe 4.0 specification with doubling the data to 16GT/s from 8GT/s in PCIe 3.0 in 2017. Products implementing this technology have begun to hit the market in 2019. Earlier this year, AMD announced it X570 chipset would support the PCIe 4.0 interface and Phison also introduced the world’s first PCIe 4.0 SSD.  With the increasing companies are working on PCIe 4.0 related product development, Cadence, as the key and leading PCIe IP solution vendor in the market, has strived for continuous enhancement of its PCIe 4.0 to be the best in the class IP solution. From our initial PCIe 4.0 solution in 4 years ago (revealed in 2015), we have made many advancements and improvements adding features such as Multi-link with any lane assignment, U.2/U.3 connector, and Automotive support. The variety of applications that PCIe4 finds a home in require extensive robustness and reliability testing over and above the compliance tests mandated by the standard body, i.e., PCI-SIG.

PCIe 4.0 TX Eye-Diagram, Loop-back Test (Long-reach) and RX JTOL Margin Test

Cadence IP team has also implemented additional "stress tests" in conjunction to its already comprehensive IP characterization plan, covering electrical, functional, ESD, Latch-up, HTOL, and yield sorting. Take the Receiver Jitter Tolerance Test (JTOL) for instance. JTOL is a key index to test the quality of the receiver of a system. This test use data generator/analyzer to send data to a SerDes receiver which is then looped back through the transmitter back to the instrument. The data received is compared to the data generated and the errors are counted. The data generator introduce jitter into the transmit data pattern to see how well the receiver functions under non-ideal conditions. While PCI-SIG compliance can be obtained on a single lane implementation, real world scenarios require wider implementations under atypical operating conditions. Cadence’s PCIe 4.0 IP was tested against to additional stressed conditions, such as different combination of multi-lanes operations, “temperature drift” conditions, e.g., bring up the chip at room temperature and check the JTOL at high temperature. 

PCIe 4.0 Sub-system Stress Test Setup

Besides complying with electrical parameters and protocol requirements, real world systems have idiosyncrasies of their own. Cadence IP team also built a versatile “System test” setup in house to perform a system level stress test of its PCIe 4.0 sub-system. The Cadence PCIe 4.0 sub-system is connected to a large number of server and desktop motherboards. This set up is tested with 1000s of cycles of repeated stress under varying operating conditions. Stress tests include speed change from 2.5G all the way to 16G and down, link enable/disable, cold boot, warm boot, entering and exiting low power states, and BER test sweeping presets across different channels. Performing this level of stress test verifies that our IP will operate to spec robustly and reliably when presented with the occasional corner cases in the real world.

More Information

For the demonstration of Cadence PCIe4 PHY Receiver Test and Sub-system Stress Test, see the video:

• PCIe 4.0 Sub-system Stress Test
• PCIe 4.0 PHY Receiver JTOL Test

For more information on Cadence's PCIe IP offerings, see our PCI Express page.

For more information on PCIe in general, and on the various PCI standards, see the PCI-SIG website.

Related Posts

• Blog: PCIe Gen4: It’s Official, We’re Compliant
• Blog: PCIe 3.0 Still Shines While PCIe Keeps Evolving
• Blog: The PCIe 4.0 Era Continues at PCI-SIG Developers Conference 2016

All engineers can enhance their mixed-signal low-power structural verification productivity by learning while doing with a PIEA RAK (Power Intent Export Assistant Rapid Adoption Kit). They can verify the mixed-signal chip by a generating macromodel for their analog block automatically, and run it through Conformal Low Power (CLP) to perform a low power structural check.  

The power structure integrity of a mixed-signal, low-power block is verified via Conformal Low Power integrated into the Virtuoso Schematic Editor Power Intent Export Assistant (VSE-PIEA). Here is the flow.

Applying the flow iteratively from lower to higher levels can verify the power structure.

Cadence customers can learn more in a Rapid Adoption Kit (RAK) titled IC 6.1.5 Virtuoso Schematic Editor XL PIEA, Conformal Low Power: Mixed-Signal Low Power Structural Verification.

• To read the overview presentation, click on following link: PIEA Overview
• To download this PIEA RAK click on following link: PIEA RAK Download

The RAK includes Rapid Adoption Kit with demo design (instructions are provided on how to setup the user environment). It Introduces the Power Intent Export Assistant (PIEA) feature that has been implemented in the Virtuoso IC615 release.  The power intent extracted is then verified by calling Conformal Low Power (CLP) inside the Virtuoso environment.

• Last Update: 11/15/2012.
• Validated with IC 6.1.5 and CLP 11.1

The RAK uses a sample test case to go through PIEA + CLP flow as follows:

• Setup for PIEA
• Perform power intent extraction
• CPF Import: It is recommended to Import macro CPF, as oppose to designing CPF for sub-blocks. If you choose to import design CPF files please make sure the design CPF file has power domain information for all the top level boundary ports
• Generate macro CPF and design CPF
• Perform low power verification by running CLP

It is also recommended to go through older RAKs as prerequisites.

• Conformal Low Power, RTL Compiler and Incisive: Low Power Verification for Beginners
• Conformal Low Power: CPF Macro Models
• Conformal Low Power and RTL Compiler: Low Power Verification for Advanced Users

To access all these RAKs, visit our RAK Home Page to access Synthesis, Test and Verification flow

Note: To access above docs, use your Cadence credentials to logon to the Cadence Online Support (COS) web site. Cadence Online Support website https://support.cadence.com/ is your 24/7 partner for getting help and resolving issues related to Cadence software. If you are signed up for e-mail notifications, you can receive new solutions, Application Notes (Technical Papers), Videos, Manuals, and more.

You can send us your feedback by adding a comment below or using the feedback box on Cadence Online Support.

Sumeet Aggarwal

When I run simulation with irun, it may use may license features. How can I know which feature(s) a product use? I get below message in cdnshelp:

-------------------------------------------------------------

Which Products Are in the License File?

One Cadence product can require more than one license (FEATURE). The product to feature mapping in the license file lists the licenses each product needs.

For example, if the license file lists these features for the NC-VHDL Simulator:

Product Name: Cadence(R) NC-VHDL Simulator
#
Type: Floating Exp Date: 31-jul-2006 Qty: 1
#
Feature: NC_VHDL_Simulator [Version: 9999.999]
#
Feature: Affirma_sim_analysis_env [Version: 9999.999]

-------------------------------------------------------------------

But, in my license file, I can't find such info. There is only "FEATURE" lines in my license file. How can I get product to feature mapping info?

Thanks!

Product Key Explorer version 4.2.2.0 Key denial of service proof of concept exploit.

•Dassault Systèmes collaborated with SATS, Asia’s leading food solutions and gateway services provider, to boost operational efficiency, minimize food waste •Growth in airline passenger travel underscores need for sustainable excellence in aerospace industry-related commercial services •Digital twin experience with the 3DEXPERIENCE platform bridges the gap between the virtual and real for in-flight catering production

•Customers can seamlessly extend their design to manufacturing ecosystem to the cloud with the integrated 3DEXPERIENCE.WORKS portfolio, enabling new levels of functionality, collaboration, agility and operational efficiency •Latest release of 3D design and engineering portfolio features hundreds of enhancements, new capabilities and workflows to accelerate and improve product development •Over six million SOLIDWORKS users can innovate products faster with better performance and streamlined...

•Survey of 3,000 consumers in the U.S., China and France examines views on personalization in healthcare, mobility, retail, and home and city environments •Personalization in healthcare, prioritized over other categories, will require AI, 5G and home assistant technologies to achieve, according to respondents •Consumers will pay on average 25.3% more for personalization, but they expect a savings in return •Generation X, millennials, and Generation Z are more willing to pay and share data...

Here is the short answer to the question of how many Microsoft products you can request: You can get 50 of each kind of product in a two-year period — but there are some exceptions.

See Microsoft products

What do you mean by "each kind of product"?

The Microsoft Donation Program divides products into categories called title groups. See the current list of 37. A title group contains products that serve essentially the same purpose, like PowerPoint and PowerPoint for Mac.

You can get products from 10 title groups in your two-year cycle.

When does this two-year cycle start and end? Is it the calendar year?

No. Your nonprofit has its own two-year cycle. Your first cycle started the day you requested your first Microsoft product through TechSoup. You can see when your current cycle ends on your Microsoft Donation Center page.

Outlook and PowerPoint are both title groups. Does that mean we can get 50 of each product?

That's right. They can be all the Windows version, all the Mac version, or a mixture of the two. And you will be able to request products from eight more title groups.

What are the exceptions you mentioned?

They have to do with servers. Microsoft offers two licensing models for its server products.

• Core-based licensing. This licensing is based on the number of cores in the physical processors of your server machines. The product page on TechSoup will tell you whether the server uses this type of licensing. You can request up to 50 of these products from each title group, the same as desktop products. But you might have to request more than one product to fully license all the processors in your server.
• Non-core-based licensing. You can request a total of five server products that do not use core-based licensing. They can be from a single title group or from different title groups, but the total cannot be more than five.

A lot of the title groups are for CALs and MLs. What are the limits for these?

You can get 50 from each title group.

CALs, or client access licenses, give you access to a server from a device like your desktop computer.

MLs, or management licenses, let your device be managed by a management server.

Where can I find out more?

This article goes into a lot more detail and gives examples of how the various allotments work together.

spanhidden

Canada's Atlantic Ocean-bordering provinces are making the most of their coastal resources, using decades of knowhow to balance economic growth with sustainability.