ser

Composer Amaal Mallik to aid COVID-19 relief efforts with ‘Music for Magic’

Every day there is something or the other happening in the entertainment industry the proceeds of which are being given away for fighting the corona crisis.



  • IMC News Feed

ser

Cyber Criminals Conduct Business Email Compromise through Exploitation of Cloud-Based Email Services, Costing US Businesses More Than $2 Billion




ser

Police say 2 Waterloo Regional Police Service badges stolen

Waterloo regional police two police badges were stolen from a home in Cambridge.



  • News/Canada/Kitchener-Waterloo

ser

TransLink suspends service reductions, rescinds layoffs

TransLink is suspending the service reductions it planned for later this month and is rescinding layoff notices to around 1,500 employees.



  • News/Canada/British Columbia

ser

Backcountry users reminded to use caution as SAR teams see increase in incidents

Adventure Smart says search and rescue incidents increased 35 per cent last week, compared to the same time last year — and during the COVID-19 pandemic, SAR teams have to do extra work for each call.



  • News/Canada/British Columbia

ser

Drive-thru egg delivery and Sunday services online make remote Easter celebrations possible

As British Columbians maintain physical distancing recommendations during the COVID-19 pandemic, this year’s Easter celebrations will have to change. In Kamloops, B.C., organizations are working to make sure Easter is as fun and social as it can be. 



  • News/Canada/British Columbia

ser

Serving God through coffee shops and carpentry

Jose, an Argentinian worker serving in Southeast Asia, tells of how he entered overseas service and what he has seen God do through his not-so-typical ministry.




ser

MLSE in contact with Ontario about Toronto serving as NHL hub city, Doug Ford says

Ontario Premier Doug Ford says the Toronto Maple Leafs' parent company has been in contact with the province about the possibility of Canada's biggest city serving as a so-called "hockey pod" for teams should the NHL resume its season.



  • Sports/Hockey/NHL

ser

Curling considers 'radical' new rules to preserve tradition and speed up games

The sport is considering radical rule changes as it tries to balance centuries of tradition with the modern need to move things along.



  • Sports/Olympics/Winter Sports/Curling

ser

A clinic on wheels: St. Joe's goes mobile to serve patients living with schizophrenia

Front-line nurses from the West 5th campus use a special van to meet patients with mental health problems — primarily those living with schizophrenia— and treat them by doing their blood work.



  • News/Canada/Hamilton

ser

SOLIDWORKS Electrical Formula SAE Tutorial: Inserting and Creating a Line Diagram Symbol

The SOLIDWORKS Electrical Formula SAE Tutorial Series will show how to use SOLIDWORKS Electrical and use its different functions. In the second video, we will learn how to insert and create a line diagram symbol.

Author information

Ajay Vaidya

I am the SOLIDWORKS Education Brand Advocacy Digital Marketing Intern in Waltham, MA. I go to Marywood University, Scranton, PA. Currently, I am studying Management Information Systems. During my free time, I love to play the keyboard, guitar, and ukulele. I can speak 8 languages!

The post SOLIDWORKS Electrical Formula SAE Tutorial: Inserting and Creating a Line Diagram Symbol appeared first on SOLIDWORKS Education Blog.




ser

Reverse Engineering to Fix the Laser Cutter

In this blog, Nick Zhang explains how he used reverse engineering to fix the laser cutter

Author information

Nick Zhang

I am a SOLIDWORKS intern working at the 3DEXPERIENCE Lab in Waltham, Massachusetts. I am a rising senior at The Pennsylvania State University, pursuing a bachelor's degree in Mechanical Engineering. My interests include boxing, swimming, and volleyball.

The post Reverse Engineering to Fix the Laser Cutter appeared first on SOLIDWORKS Education Blog.




ser

Aero Design Series – Stock Wheel – Part 1: Intro and Initial Mockup

In this case, we will be reproducing a wheel in SOLIDWORKS based on measurements of the actual part. This tutorial series will span the full design process, from initial mockup all the way to final details.

Author information

Matthew Gruber is an alumni of Concordia University's Aero Design and Design/Build/Fly teams in 2015 through 2017, having joined after gaining an interest in helicopters and airplanes from living in Alaska.

Now is in his 3rd year in the airframe stress group of the 525 helicopter program at Bell and with 1 year of internships at Bombardier behind him, he credits the hands-on learning and team project experiences in SAE and D/B/F as the most formative in his path towards aerospace engineering. Being able to create in programs like SolidWorks and then to build into realization is one of the most rewarding aspects of engineering.

In his spare time, Matt likes backcountry snowboarding with his family dogs, bicycling for commuting, mountain trails and touring, looking for music and hanging out with friends and family.

For fun, for practice, and for a connection with the education and University communities and you the students, Matt is stoked to bring you these aero design video series.

The post Aero Design Series – Stock Wheel – Part 1: Intro and Initial Mockup appeared first on SOLIDWORKS Education Blog.




ser

Aero Design Series- Stock Wheel – Part 2: Front Plane Sketch and Revolve

Welcome to the #Aero Design Video Series created by Matthew Gruber! This is the second tutorial in the 10 part series where we will go from the initial mockup to a detailed front plane sketch and revolve feature.

Author information

Matthew Gruber is an alumni of Concordia University's Aero Design and Design/Build/Fly teams in 2015 through 2017, having joined after gaining an interest in helicopters and airplanes from living in Alaska.

Now is in his 3rd year in the airframe stress group of the 525 helicopter program at Bell and with 1 year of internships at Bombardier behind him, he credits the hands-on learning and team project experiences in SAE and D/B/F as the most formative in his path towards aerospace engineering. Being able to create in programs like SolidWorks and then to build into realization is one of the most rewarding aspects of engineering.

In his spare time, Matt likes backcountry snowboarding with his family dogs, bicycling for commuting, mountain trails and touring, looking for music and hanging out with friends and family.

For fun, for practice, and for a connection with the education and University communities and you the students, Matt is stoked to bring you these aero design video series.

The post Aero Design Series- Stock Wheel – Part 2: Front Plane Sketch and Revolve appeared first on SOLIDWORKS Education Blog.




ser

Aero Design Series – Stock Wheel – Part 3: Saving and Renaming

Welcome to the first in a line of Aero Design Video Series created by Matthew Gruber in collaboration with SOLIDWORKS and SolidXPerts! This first series is for beginners using SOLIDWORKS for the SAE Aero Design and Design/Build/Fly competitions. In this tutorial, we will learn focus on saving and renaming parts.

Author information

Matthew Gruber is an alumni of Concordia University's Aero Design and Design/Build/Fly teams in 2015 through 2017, having joined after gaining an interest in helicopters and airplanes from living in Alaska.

Now is in his 3rd year in the airframe stress group of the 525 helicopter program at Bell and with 1 year of internships at Bombardier behind him, he credits the hands-on learning and team project experiences in SAE and D/B/F as the most formative in his path towards aerospace engineering. Being able to create in programs like SolidWorks and then to build into realization is one of the most rewarding aspects of engineering.

In his spare time, Matt likes backcountry snowboarding with his family dogs, bicycling for commuting, mountain trails and touring, looking for music and hanging out with friends and family.

For fun, for practice, and for a connection with the education and University communities and you the students, Matt is stoked to bring you these aero design video series.

The post Aero Design Series – Stock Wheel – Part 3: Saving and Renaming appeared first on SOLIDWORKS Education Blog.




ser

Aero Design Series – Stock Wheel – Part 4: Right Plane Cutouts

In this Aero Design Video Series tutorial, we will learn how to do right plane cutouts that form the spokes of the wheel.

Author information

Matthew Gruber is an alumni of Concordia University's Aero Design and Design/Build/Fly teams in 2015 through 2017, having joined after gaining an interest in helicopters and airplanes from living in Alaska.

Now is in his 3rd year in the airframe stress group of the 525 helicopter program at Bell and with 1 year of internships at Bombardier behind him, he credits the hands-on learning and team project experiences in SAE and D/B/F as the most formative in his path towards aerospace engineering. Being able to create in programs like SolidWorks and then to build into realization is one of the most rewarding aspects of engineering.

In his spare time, Matt likes backcountry snowboarding with his family dogs, bicycling for commuting, mountain trails and touring, looking for music and hanging out with friends and family.

For fun, for practice, and for a connection with the education and University communities and you the students, Matt is stoked to bring you these aero design video series.

The post Aero Design Series – Stock Wheel – Part 4: Right Plane Cutouts appeared first on SOLIDWORKS Education Blog.




ser

Residential property prices: detailed series (nominal)

Close to 300 series at various frequencies for 60 countries have been updated.




ser

Debt service ratios for the private non-financial sector

Advanced preliminary release for Q4 2019 quarterly data on debt service ratios (DSRs) for the private non-financial sector (PNFS) for 32 countries have been updated. DSRs for PNFS breakdown sectors, ie for households and for non-financial corporations are also available for 17 countries.




ser

The Best Video Streaming Services for 2020

Cord cutters have more choices than just Netflix and Hulu. We break down the best video streaming services for your money, whether you're looking to completely replace cable or watch the latest original content on-demand.




ser

Trump and His Infallible Advisers

Beware men who never admit having been wrong.




ser

'Expanding Empathy' lecture series moves online

The 2020 "Expanding Empathy" lecture series has moved online and added a lecture on "The Altruistic Brain," as well as a panel discussion on empathy in the time of COVID-19, both to be held on April 29 via Zoom.




ser

Lecture series to address how to make sense of COVID-19 projections

David Dowdy, associate professor in the Department of Epidemiology at the Johns Hopkins Bloomberg School of Public Health, will deliver the presentation “Simple Principles for Interpreting Complex Models: How to Make Sense of COVID-19 Projections,” at 4 p.m. via Zoom webinar on Thursday, April 30, as the next presentation in its Dean’s Lecture Series: Perspectives on the Pandemic.




ser

New iOS feature automatically sends medical information to emergency services



Apple's latest iOS 13.5 beta release includes a new Health app feature that allows iPhone and Apple Watch users to automatically send Medical ID information to first responders.




ser

Hands on: Brydge Pro+ firmware updated improves iPadOS user experience



Brydge on Wednesday launched a new update to improve its Brydge Pro+ keyboard with trackpad that recently starting shipping for iPad Pro. AppleInsider goes hands-on with the latest firmware to see how Brydge's improvements have strengthened the user experience of its flagship product.




ser

A year after media doubting, Apple's Services save a difficult year



Last March, analysts and tech bloggers dumped out arrogant contempt over Apple's latest product introduction. This year, those new offerings helped save Apple's Q2 earnings and are projected to bolster its June quarter performance despite the pandemic.




ser

Apple Watch Series 5 gets $100 price cut at Amazon, matching record low prices



Amazon has reissued its popular Apple Watch deal, dropping the Series 5 Watches with Cellular to $399 after a $100 price cut. Multiple styles are on sale and in stock.




ser

Mother's Day weekend deals: $100 off Apple Watch Series 5, iPod touch from $95, 16" MacBook Pros $2,024



Mother's Day may be tomorrow, but you can still grab a great deal on Apple hardware with prices starting at just $95. Take advantage of the return of the popular $100 discount on Apple Watch Series 5 styles, plus a new $375 markdown on 16-inch MacBook Pros and flash deals on iPod touch models.




ser

Getting closer

OM Montenegro holds a programme for local friends to learn and talk about God.




ser

A summer of service

Student Amy from the USA used her summer vacation to serve with OM in Montenegro and Serbia, sharing God's love with the young and old.




ser

SER-8583

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8583:




ser

SER-8581

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8581:




ser

SER-8582R

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8582R:




ser

SER-8586

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8586:




ser

SER-8590

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8590:




ser

SER-8592

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8592:




ser

SER-8595

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8595:




ser

SER-8594

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8594:




ser

SER-8584

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8584:




ser

SER-8596

PLEASE CLICK ON LINK TO VIEW PDF OF SER-8596:




ser

White House hosts service for National Day of Prayer

Washington D.C., May 7, 2020 / 04:30 pm (CNA).- The White House service for the National Day of Prayer on Thursday focused on protection from the coronavirus pandemic. President Trump said Americans will continue to pray for divine assistance as the nation faces “unforeseen and seemingly unbearable hardships.”

Sister Eneyda Martinez of the Poor Sisters of St. Joseph community in Alexandria, Virginia was one of the religious leaders present to lead attendees in prayer.

“Merciful Savior, heal and comfort the sick so that with health restored, they may give you praise. Divine Physician, accompany our caregivers, so that serving you with patience they may heal wisely. And through wisdom, guide our leaders, so that through seeking remedies they may follow your light,” Sister Eneyda Martinez prayed at the service in the White House’s Rose Garden.

The National Day of Prayer was designated by Congress in 1952, and scheduled in 1988 to be observed annually on the first Thursday in the month of May.

In attendance at the White House service were President Trump and First Lady Melania Trump, as well as Vice President Mike Pence and Second Lady Karen Pence, and Paula White, and other religious leaders from Catholic, Christian, and Mormon churches, and Jewish and Hindu faiths.

The prayer service emphasized prayer for protection from the coronavirus pandemic, as well as prayer for the sick and their families, and health care workers.

“Christ, the Anointed, protect us in body and in spirit, so that free from harm we may be delivered from all affliction,” prayed Sister Eneyda Martinez.

Vice President Pence urged Americans to be “persistent in prayer,” especially for the families of the dead, those sick with the virus, and health care workers, many who have “literally taken the place of loved ones” in being the only close contacts of COVID-19 patients.

On Thursday morning, Trump issued a proclamation, noting the importance of prayer during the pandemic.

“During the past weeks and months, our heads have bowed at places outside of our typical houses of worship, whispering in silent solitude for God to renew our spirit and carry us through unforeseen and seemingly unbearable hardships,” Trump stated.

“Even though we have been unable to gather together in fellowship with our church families, we are still connected through prayer and the calming reassurance that God will lead us through life's many valleys.”

The U.S. Centers for Disease Control was reportedly drafting guidance for states to reopen public accommodations and religious services, but according to the Associated Press on Thursday, the document was buried by the administration.

That document reportedly advised against churches holding services if they were not in a “community no longer requiring significant mitigation.”

However, if that and other certain conditions were in place, churches should take precautions such as ensuring social distancing, wearing of masks by congregants, and intensifying cleaning of churches, the CDC document reportedly said.

State orders have varied in their restrictions on public gatherings during the pandemic; a Kansas stay-at-home order allowed religious gatherings of 10 or fewer people, while Illinois prohibited all religious gatherings.

After every U.S. diocese stopped public Masses during March, Catholic dioceses have started offering public Masses, beginning with the diocese of Las Cruces, New Mexico, with several other dioceses following suit in ensuing days.

Officials from the CDC and the White House spoke with four of the bishops on April 28 and 29 about the resumption of public religious services.




ser

Data contradicts Harvard professor's assertions about homeschooling

Denver Newsroom, May 7, 2020 / 05:29 pm (CNA).- A Notre Dame sociologist is using data to challenge a Harvard Law professor’s assertions that homeschooling is “dangerous”, and detrimental to society.

The controversy stems from a recent paper by professor Elizabeth Bartholet in which she calls for a presumptive ban on homeschooling in the United States.

Bartholet, as quoted in a Harvard Magazine piece based on her paper, points to unspecified “surveys of homeschoolers” to assert that “up to 90 percent” of homeschooling families are “driven by conservative Christian beliefs, and seek to remove their children from mainstream culture.”

“Some” homeschooling parents are “‘extreme religious ideologues’ who question science and promote female subservience and white supremacy,” she writes.

David Sikkink, associate professor in the Department of Sociology at the University of Notre Dame, analyzed surveys of homeschooling families— including a 2016 government survey—  and found that these families are not overwhelmingly Christian nor religious, and are not as universally closed-off to the outside world as Bartholet asserts.

In the analysis Sikkink conducted, just 16% of homeschooling parents said they were homeschooling primarily for religious reasons. The number one reason homeschooling parents cited was a concern about school environment, such as safety, drugs, or negative peer pressure.

Eleven percent of parents reported homeschooling because their child has special needs.

While approximately half of the homeschooling parents surveyed mentioned religion as a factor in their decision to homeschool, Sikkink notes that the parents who cited religion as a reason were, on the whole, more highly educated than those parents who did not.

In terms of Bartholet’s assertion that some homeschooling parents “believe that women should be totally subservient to men and educated in ways that promote such subservience,” Sikkink’s analysis did not find evidence that religious households oppose higher education for girls.

Among the homeschooling families in the survey who use a religious curriculum, there was no difference in their self-reported educational expectations— i.e., what education level they expected their children to reach—  for their male children vs. their female children.

Several past studies have shown that homeschool students typically outperform their public and private school counterparts on things like standardized tests and college performance. A 2016 study from the National Council on Measurement in Education showed that, when adjusted for demographic factors, homeschool students were on par academically with their demographically-similar peers.

Moreover, the data Sikkink analyzed suggests that after family background and demographic controls are accounted for, about 64% of homeschoolers “completely agree” that they have much in life to be thankful for, compared to 53% of public schoolers.

On feelings of helplessness, or lack or goals or direction in life, homeschoolers do not substantially differ from their public school counterparts, the analysis suggests.

In the Arizona Law Review, Bartholet argues that while homeschool children may perform as well as their peers on standardized tests or in college, they are also often isolated from their peers and denied experiences and exposures that would make them more productive citizens.

Bartholet claims in her article that “a very large proportion of homeschooling parents are ideologically committed to isolating their children from the majority culture and indoctrinating them in views and values that are in serious conflict with that culture.”

“Isolated families,” she asserts, “constitute a significant part of the homeschooling world.”

In contrast, Sikkink’s analysis found that among the schooling groups surveyed, homeschooling families had the highest level of “community involvement” of all school sectors.

“Community involvement” activities included attending sporting events, attending concerts, going to the zoo or aquarium, going to a museum, going to a library, visiting a bookstore, or attending an event sponsored by a community, religious, or ethnic group.

Homeschooling graduates are almost identical to their public school counterparts in likelihood to vote in federal and local elections, Sikkink found.

Furthermore, the total number of volunteer and community service hours for homeschooling graduates is very similar to or slightly higher than public school graduates, the analysis found.

Bartholet asserts that some homeschoolers “engage in homeschooling to promote racist ideologies and avoid racial intermingling.”

In contrast: “The reality is that about 41% of homeschooled children are racial and ethnic minorities,” Sikkink writes.

“When asked about four closest friends, about 37% of young adult homeschoolers...mention someone of a different race or ethnicity—exactly the same as public schoolers.”

This diversity also extends to schooling practices— increasingly, Sikkink says, homeschooling adopts new forms, including “hybrids” that combine the benefits of home and institutional schooling.

“About 57 percent of homeschoolers are using some form of instruction outside the family,” Sikkink told CNA in an email.

“That includes using tutors, private or public schools, colleges or universities, or homeschooling coops. That percentage would be higher if we included those who reported obtaining curriculum from formal institutions, such as public schools.”

Moreover, about a third of homeschooling parents obtain their curriculum or books from a public school or school district.

“Altogether, 46% of homeschoolers have some pedagogical relationship with public schools,” Sikkink asserts.

Bartholet argues that homeschooling puts children at risk of abuse by their parents, while if children were in public schools, they would be among teachers who are mandatory reporters of any suspected abuse that may be taking place.

“The issue is, do we think that parents should have 24/7, essentially authoritarian control over their children from ages zero to 18? I think that’s dangerous,” Bartholet asserts in the Harvard Magazine piece.

“I think it’s always dangerous to put powerful people in charge of the powerless, and to give the powerful ones total authority.”

Sikkink says Bartholet’s image of a child confined to the home “24/7...from ages zero to 18” is not consistent with the data.

“When we look at the use of homeschooling for each year of the child's upbringing, we only find a small percentage that report that the child was homeschooled for all their years of schooling,” Sikkink told CNA in an email.

Many of these students are part-time public schoolers— about 25% of homeschoolers receive some instruction in public schools during their school-age careers, he wrote.

Homeschooling regulations vary widely by state. Sikkink told CNA he hopes future studies will examine the effects of state-level variation in regulation on homeschooling quality.

“The question of schooling oversight remains, of course, but it would be short-sighted not to keep homeschooling and other creative schooling options in the mix, including the hybrid models that cross sector boundaries,” Sikkink concludes.

 

Subsequent to the publication of this story, Sikkink told CNA he had revised his assessment of the percentage of homeschoolers using instruction outside the family, from 64% to 57%. The story has been updated to reflect that assessment.




ser

Home Project Series: Site Plan

Do you enjoy making home improvements? Do you have a flare for design and have some SOLIDWORKS skills? Perhaps, you just want to install a fence? Depending on when and where you purchased your home it may have a fence

Author information

TPM, Inc. is the Carolina’s largest 3D CAD provider and a leading technology company proud of its reputation of providing cutting-edge solutions to the engineering and design community for the past 40 years. Founded in 1973, TPM Inc. serves more than 3,000 customers across the Southeast each year. Inspired by our founder, Jerry Cooper, we are committed to offering our clients the best: 3D Design Software, 3D Printing and Scanning Options, Data and Document Management Solutions, Large-Format Graphics, Wide-Format Plotters and Office Equipment, and Reprographics.

The post Home Project Series: Site Plan appeared first on SOLIDWORKS Tech Blog.




ser

Chinese Communist Party 'is the most serious virus of all,' human rights activist says

Washington D.C., Apr 24, 2020 / 02:00 pm (CNA).- The Chinese Communist Party (CCP) covered up the spread of the new coronavirus within the country, suppressing the real rate of infection and violating the rights of its citizens as it did so, a Chinese human rights activist told a forum at The Catholic University of America on Friday.

“It is time to recognize the threat the Chinese Communist Party poses to all humanity. The CCP represses and manipulates information to strengthen its hold on power, regardless of the toll on human lives,” human rights lawyer Chen Guangcheng said April 24 during an online forum on the CCP and the new coronavirus.

The forum was hosted by Faith & Law in partnership with the Institute for Human Ecology at the Catholic University of America. Guanchen is Distinguished Visiting Fellow at Catholic University’s Institute for Policy Research and Catholic Studies.

Guangcheng is a blind human rights lawyer from China, who received sanctuary in the U.S. in 2012 after he was targeted by the CCP for his advocacy work. Guangcheng has sharply criticized the party for its human rights abuses, including from its one-child family planning policy.

He was sent to prison and subject to house arrest, during which he claims he and his family were repeatedly beaten and denied medical treatment.

On Friday, the lawyer warned audience members against suggestions that other countries should emulate China’s authoritarian response to the new coronavirus (COVID-19).

There are currently more than 2.7 million confirmed cases of COVID-19 in the world.

The city of Wuhan is recognized as the epicenter of the global pandemic, and the government on Jan. 23 instituted a strict lockdown in the city of 11 million people. Guangchang cited reports of Chinese families being barricaded inside their own homes, and the group Human Rights Watch compiled stories of residents reportedly dying from lack of access to care during the lockdown.

“Whole families have been found dead in their apartments because they could not get out,” he said, noting that despite the CCP’s claim that it has the virus under control, lockdowns are currently in force in the city of Harbin.

“This is despite the authorities ordering everyone back to work and telling the outside world that they have the virus under control,” Guangcheng said. “The resurgence is directly related to the CCP hiding the truth, and cracking down on people who tried to share information on the virus.”

He also claimed that the CCP has been using the crisis caused by the pandemic to crack down on dissent, detaining human rights activists at separate “so-called quarantine sites.”

The wife of one human rights lawyer—who had just been released from prison told The Guardian that she feared the government was putting her husband under house arrest near where he was imprisoned, 400 kilometers away from her, under the guise of a quarantine.

According to World Health Organization (WHO) statistics, China’s number of COVID-19 cases rose considerably through January and February to 79,389 on Feb. 29 with 2,838 deaths, before its daily increase in case numbers slowed to a trickle in March including just one new reported case on March 22 in the country of more than 1.4 billion people.

Just 3,352 deaths were reported on April 16 before the reported number jumped to 4,642 the next day.

“There is nothing about the CCP’s numbers that are believable,” Guangcheng said. “What people are calculating is that roughly 700,000 may have died in China—in terms of people who have been infected, no one knows the numbers.”

For instance, he said, during the Wuhan lockdown citizen journalists claimed that the situation was far worse than the CCP was reporting; they recorded people collapsing in the streets and hearses and vans carrying body bags at all hours of the day.

“In summary, the CCP is the biggest and most serious virus of all, with over 193,000 people dead worldwide from the coronavirus,” the lawyer said. “There should be no question of the regime’s threat.”



  • Asia - Pacific

ser

Is Donald Trump Serious?

He says yes. His positions on the issues suggest otherwise.




ser

BIZ-Quartalsbericht September 2017: Verbesserte Aussichten und niedrige Inflation beleben die Risikoübernahme

German translation of the BIS press release about the BIS Quarterly Review, September 2017




ser

Fin24.com | Lockdown | African governments must balance saving lives and preserving economies

The African Union Development Agency says countries should think about how they choose the lesser of the two evils because strict lockdowns have severe consequences.




ser

Fin24.com | UIF will be under 'very serious' strain, warns labour minister

Minister of Employment and Labour Thulas Nxesi said on Thursday afternoon that the Unemployment Insurance Fund was going to be under "very serious strain" and that he foresaw a period where there would be heavy dependence on the state.




ser

Master and Expand Your SOLIDWORKS Skills with LIVE Design series

Don't miss tuning in for our LIVE Design web series to see our own SOLIDWORKS experts as they model a variety of products and provide design Tips, training, and more ways to increase your design knowledge.

Author information

Dassault Systèmes SolidWorks Corp. offers complete 3D software tools that let you create, simulate, publish, and manage your data. SolidWorks products are easy to learn and use, and work together to help you design products better, faster, and more cost-effectively. The SolidWorks focus on ease-of-use allows more engineers, designers and other technology professionals than ever before to take advantage of 3D in bringing their designs to life.

The post Master and Expand Your SOLIDWORKS Skills with LIVE Design series appeared first on The SOLIDWORKS Blog.




ser

ECAD Solutions Town Hall Mini-Series

Learn how you can unite your electrical and mechanical design teams with collaboration tools in SOLIDWORKS ECAD tools.

Author information

JP Emanuele

JP is a Territory Technical Manager, SOLIDWORKS Electrical, North America.

The post ECAD Solutions Town Hall Mini-Series appeared first on The SOLIDWORKS Blog.




ser

Learn the Value of Simulation in our Webinar Series

Don't miss registering for our simulation webinar series to learn how you can improve your design decision-making with simulation tools.

Author information

Ramesh Lakshmipathy

Senior Territory Technical Manager at Dassault Systemes SOLIDWORKS

The post Learn the Value of Simulation in our Webinar Series appeared first on The SOLIDWORKS Blog.