An OM worker and local team of believers visit indigenous Cabecar communities in the mountains of Talamanca, Costa Rica.

After years of living among a remote unreached people group, OMers see God draw the first local believers to Himself.

Rapid erosion caused by a geological act of “piracy” tens of thousands of years ago may have raised Earth’s crust and elevated Mount Everest by as much as 50 metres

Saline drops and sprays have already been linked to reduced cold symptoms in adults and now a study suggests they also work in children

Hong Kong : Chinese University Press, [1984]

From its origin in the Deccan to its present location in the Tower of London, the Kohinoor has had a turbulent journey

This has never happened to me before: I enjoyed the sequel more than the original! Be assured, though, My Side of the Mountain

is very good. Young Sam Gribley goes off to live in the wilderness quite comfortably in a huge hollow tree. He trains a young falcon he named Frightful:

"Every day I worked to train Frightful. It was a long process, I would put her on her stump with a long leash and step back a few feet with some meat in my hand. Then I would whistle. The whistle was supposed eventually to mean food to her. So I would whistle, show her the meat, and after many false flaps she would finally fly to my hand. I would pet her and feed her. She could fly fairly well, so now I made sure that she never ate unless he flew to my fist.

"One day at breakfast I whistled for Frightful. I had no food, she wasn't even hungry, but she came to me anyway. I was thrilled. She had learned a whistle meant 'come.'

"I looked into her steely eyes that morning and thought I saw a gentle recognition. She puffed up her feathers as she sat on my hand. I call this a 'feather word.' It means she is content."

I also enjoyed this, from near the end of the book: "I returned to my patch on the mountain, talking to myself all the way. I talk to myself a lot, but everyone does. The human being, even in the midst of people, spends nine-tenths of his time alone with the private voices of his own head. Living alone on a mountain is not much different, except that your speaking voice gets rusty, I talked inside my head all the way home, thinking up schemes, holding conversations with Bando and Dad and Matt Spell...
"I cooked supper, and then sat down by my little fire and called a forum. It is very sociable inside my head, and I have perfected the art of getting a lot of people arguing together in silence or in a forum, as I prefer to call it. I can get four people all talking at once, and a fifth can be present, but generally I can't get him to talk. Usually these forums discuss such things as a storm and whether or not it is coming, how to make a spring suit, and how to enlarge my house without destroying the life in the tree. Tonight, however, they discussed what to do about Matt Spell. Dad kept telling me to go right down to the city and make sure he published nothing, not even a made-up story. Bando said, no, it's all right, he still doesn't know where you live, and then Matt walked into the conversation and said that he wanted to spend his spring vacation with me, and that he promised not to do anything untoward. Matt kept using 'untoward' - I don't know where he got that expression, but he liked it and kept using it - that's how I knew Matt was speaking; everything was 'untoward.'"

What I liked there was that it seemed that author Jean Craighead George described how her stories got generated. Characters in her head interacted, and she transcribed what took place onto paper. I could be wrong, but maybe.

The sequel that I liked even more is called On the Far Side of the Mountain. There's a third book, Frightful's Mountain, but I have not read it yet. It's here at my desk, so it won't be long.

The catastrophic impact of COVID-19 on long-term care facilities likely was exacerbated by the outdated design and crowded conditions found in some seniors’ homes, experts say.

Massachusetts man Bill Giguere is relieved after he lost his wedding band on a Mount Hancock in New Hampshire last Thursday but got it back after Tom Gately saw his Facebook plea.

Studies investigating the effects of pregnant women’s low level exposure to polychlorinated biphenyls (PCBs) on the weight of their newborn babies have produced conflicting results. However, new research, which involved 8000 pregnant women across Europe, adds to the mounting body of evidence that PCB exposure does in fact reduce birth weight.

While activists against mountaintop removal grow, miners of the region defend their practices as a way of life.

Rainforest Action Network decides enough is enough with Obama's broken promises on mountaintop mining and stages dramatic protest in front of the EPA.

The new facility is Southern Company's fourth in the state, and another example of the company's commitment to renewable energy.

The mountain pika is sensitive to temperature change. Warmer mountains and less snowpack are problems for this rabbit relative.

Goal to raise 1.96 Million for Non-Profit: Treasures of Africa.

Rick Ridgeway, vice president of environmental initiatives at Patagonia.

J. Martinez & Company fine coffees would like to discuss what exactly it is that makes Jamaica Blue Mountain coffee so incredibly good.

Bengaluru: The Union Cabinet’s decision to freeze the DA of its employees till July 2021 and Kerala’s decision to absorb a month’s salary of its employees to the CM’s relief fund to fight Covid-19 has put pressure on chief minister BS Yediyurappa to bite the bullet.The chief minister or the Karnataka Cabinet is yet to take a call on reworking pay and compensation package of its employees in the face of a sharp drop in revenues, and enormous pressure on the finance department to meet the rising demand for funds for Covid-19-related activities and the farm sector.The chief minister had told ET last week that he will take a decision in two weeks after assessing the situation.Karnataka’s salary and pension bill per month comes to about Rs 5,500 crore, and the state has been able to hold on because of the impressive GST collections last month on account of good business climate in February. The commercial tax department does not have any hopes of decent collections over the next two months because of the host of relief announced by the ministry of finance to dealers on GST remittances. The department can hope to have considerable collections only in June. All other major revenue sources for the Karnataka government such as liquor sales, property and vehicles registration are nearly dry.Several IT companies such as TCS, Infosys and Wipro have deferred annual increments.

Changes in forest management have detrimentally affected the economic health of small communities in the Blue Mountain region of Oregon over the past few decades. A build-up of small trees threatens the ecological health of these forests and increases wildland fire hazard. Hoping to boost their economies and also restore these forests, local leaders are interested in the economic value of timber that might be available from thinning treatments on these lands.

In the mid-1990s, forest managers on the Malheur National Forest were concerned about their prescribed fire program. Although they have only a few weeks of acceptable conditions available in the spring and fall, they were worried that spring-season prescribed burning might be exacerbating black stain root disease and having negative effects on understory plants.

The work described in this report was initiated during the Interior Columbia Basin Ecosystem Management Project (ICBEMP). The ICBEMP produced a broad-scale scientific assessment of ecological, biophysical, social, and economic conditions for the interior Columbia River basin and portions of the Klamath and Great Basins. The broad-scale assessment made extensive use of potential vegetation (PV) information. This report (1) discusses certain concepts and terms as related to PV, (2) describes how a PV framework developed for the broad-scale ICBEMP assessment area was stepped down to the level of a single section in the national hierarchy of terrestrial ecological units, (3) describes how fine-scale potential vegetation types (PVTs) identified for the Blue Mountains section were aggregated into the midscale portion of the PV hierarchy, and (4) describes the PVT composition for each of the midscale hierarchical units (physiognomic class, potential vegetation group, plant association group).

Quaking aspen (Populus tremuloides Michx.) is a valuable species that is declining in the Blue Mountains of northeastern Oregon. This publication is a compilation of over 20 years of aspen management experience by USDA Forest Service workers in the Blue Mountains.

The Blue Mountains Adaptation Partnership was developed to identify climate change issues relevant to resource management in the Blue Mountains region, to find solutions that can minimize negative effects of climate change, and to facilitate transition of diverse ecosystems to a warmer climate.

In frequent-fire forests of the interior Western United States, historical (prefire suppression) conditions are often used as a reference to set management objectives, guide prescriptions, and monitor treatment effectiveness. We quantified the historical size, density, composition, and spatial patterns of dry mixed-conifer forests in the Blue Mountains of Oregon to establish reference conditions that could be used for ongoing forest-restoration efforts.

AsiaWire China Mobile Hong Kong and Huawei have jointly taken 5G connectivity to the highest-altitude base station to the north...

A fastening assembly includes a connecting member, a mounting member mounted to the connecting member, and a sliding member. The mounting member includes a first fixing portion. The sliding member is slidably received in the mounting member and the connecting member. The sliding member includes a first end exposed out of the first fixing portion, and a second end slidably received in the connecting member. The second end of the sliding member is operable to be extended out of or substantially coplanar with an end of the connecting member. The fastening assembly can be utilized to mount a heat sink to a board.

A surface mounting varistor for high voltages and current pulses without any risk of burning a mounting board is provided. A covering material for a varistor 1 has a duplex (two layer) structure made from a first mold layer 13 and a second mold layer 15, and a leg with a predetermined height is formed on the bottom of the covering material. As a result, a space (void) formed between a varistor element 2 and a mounting board 20 when the varistor 1 is mounted on the board 20 allows avoidance of the risk of burning the board 20, even if the varistor short-circuits.

A surface-mountable over-current protection device comprises one PTC material layer, first and second connecting conductors, first and second electrodes and an insulating layer. The PTC material layer has a resistivity less than 0.2 Ω-cm, and comprises crystalline polymer and conductive filler dispersed therein. The first and second connecting conductors are capable of effectively dissipating heat generated from the PTC material layer. The first and second electrodes are electrically connected to first and second surfaces of the PTC material layer through the first and second connecting conductors, respectively. The dissipation factor depending on the ratio of the total area of the electrodes and the conductors to the area of the PTC material layer is greater than 0.6. At 25° C., the value of the hold current of the device divided by the product of the area of the PTC material layer and the number of the PTC material layer is greater than 1A/mm2.

A surface mountable over-current protection device having upper and lower surfaces comprises a PTC device, first and second electrodes, and first and second circuits. The PTC device comprises a PTC material layer and first and second conductive layers. The PTC material layer is disposed between the conductive layers and comprises crystalline polymer and conductive filler dispersed therein. The first electrode comprises a pair of first metal foils, whereas the second electrode comprises a pair of second metal foils. The first circuit connects the first electrode and conductive layer, and has a first planar line extending horizontally. The second circuit connects the second electrode and conductive layer, and has a second planar line extending horizontally. At least one of the planar lines has a thermal resistance sufficient to mitigate heat dissipation by which the over-current protection device undergoes a test at 25° C. and 8 amperes can trip within 60 seconds.

A surface-mountable over-current protection device comprises a PTC material layer, first and second conductive layers, first and second electrodes, first and second electrically conductive connecting members. The PTC material layer has a resistivity less than 0.18 Ω-cm. The conductive layers are in contact with opposite surfaces of the PTC material layer. The first electrode comprises pair of first metal foils and is insulated from the second conductive layer. The second electrode comprises a pair of second metal foils and is insulated from the first conductive layer. The first electrically conductive connecting member connects to the first metal foils and conductive layer. The second electrically conductive connecting member connects to the second metal foils and conductive layer. The first electrically conductive connecting member comprises 40%-100% by area of the first lateral surface, and the second electrically conductive connecting member comprises 40%-100% by area of the second lateral surface.

A surface mountable over-current protection device comprises one PTC material layer, first and second conductive layers, first and second electrodes, and an insulating layer. The PTC material layer comprises crystalline polymer and conductive filler dispersed therein. The first and second conductive layers are disposed on first and second planar surfaces of the PTC material layer, respectively. The first and second electrodes are electrically connected to the first and second conductive layers. The insulating layer is disposed between the first and the second electrodes for insulation. At the melting point of the crystalline polymer, the CTE of the crystalline polymer is greater than 100 times the CTE of the first or second conductive layer, and the first and/or second conductive layers has a thickness which is large enough to obtain a resistance jump value R3/Ri less than 1.4.

Systems, methods and apparatus are provided through which in some implementations an expandable or adjustable snap-in cam or other friction device having a mechanically lockable drawer, shelf or divider in a cabinet, pantry, kitchen cupboard mount includes no screws or other permanent mounting.

Apparatus, systems and methods of 50 CFM exhaust and ventilation fans for bathrooms with grill covers having removable light lens covers, and flaps/ears that allow the housings to mount directly to joists and/or other structural members inside of a ceiling or inside of a wall. The housing can include a mounting plate having a motor with attached impeller thereon, wherein the mounting plate with motor and attached impeller and electrical connectors can be removed as a single unit from the housing for accessing and inspecting interior wire connections during inspection and for ease in replacing parts such as burned out motors overtime.

A mount assembly is provided that allows for interconnecting an implement (e.g., snow plow, rotary brush etc.) to the front end of a vehicle while permitting that implement to move laterally relative to the front end of the vehicle.

An active mount structure may include an actuator coupled to an actuator plate coupled to an orifice plate within a housing, wherein the actuator includes a plunger coupled to the actuator plate, a first rod rotatably coupled to a bottom of the plunger and rotated by a first motor unit, wherein the first rod includes a rotating shaft rotatably coupled to the plunger, one side of the rotating shaft extending to form an extending portion, and a rotation retention portion formed at the extending portion, a swash plate defining a center hole therein and having shaft protrusions, wherein the first rod may be disposed in the center hole and the rotation retention portion may be engaged to the swash plate, and a second rod engaged at the swash plate and raised or lowered by a second motor unit, wherein the shaft protrusions may be rotatably coupled to the housing.

A valve operating device includes a mounting for attachment to a vehicle and an elongate arm, the free end of which is only moveable across the underlying ground. The joints of the arm pivot around vertical axes and the arm is locked into a desired orientation by a brake at each joint. A valve turning machine is at the free end of the arm. The brakes are engaged and released by a control on the valve turning machine.

The “Microcosm Terrestrial and Aquatic Landscape Habitat” is a Main Basin Pond 4 surrounded on three sides by artificial rock, “Miniature Mountains” 3 a, 3 b, 3 c or Natural Looking Imitation Rocks. The fourth, front side has no “Miniature Mountains” or Natural Looking Imitation Rocks to enclose the Main Basin Pond. Instead, here I adhere on a Pane of Glass 2 a to the imitation rock surface using Silicon Sealant 2 b or other sealants 2 c: A pond-aquarium hybrid! The “Miniature Mountains” are higher than the water level in the Main Basin Pond. On the top or sides of the “Miniature Mountains” is an Upper Pool 5. Water in the Main Basin Pond is circulated up to the Upper Pool using a Submersible; Electric, Aquatic, Pump 8. From the Upper Pool, the Water then flows down a Water Course to the Waterfalls and back to the Main Basin Pond to oxygenate the water.

The present invention provides a method and apparatus of reducing current requirements by increasing resistance of the blade structure by reducing the cross sectional area of at least one section of the blade so that the electrical current requirements for heating of the blade to cutting temperature are reduced wherein the power supply and substantially entire unit may be mounted within a hand held unit. Methods of shaping blades to perform various heat distributions for specialty blades for custom cutting are disclosed. Further, an improved blade mounting structure is provided which includes structure for maintaining the legs of the blade parallel to the direction of cut and provides for easy insertion of new blades by maintaining a slotted blade cradle stable and in alignment with the blades and a clamp member away from the blade when the clamp mounting structure is loosened.

An apparatus for shot peening blade mounting areas on a disc of a rotor includes a peening nozzle unit which streams shot peening media along a longitudinal axis. The unit includes a nozzle outlet which extends at least partially in a circumferential direction of the unit, and a deflection arrangement with a deflection area for the media. The deflection area is at least partially cone or half-hyperboloid shaped, such that the media passes the nozzle outlet over an angle range in circumferential direction after being deflected by the deflection arrangement. A method for shot peening the blade mounting areas positions the unit in a slot profile of a blade mounting area, and guides the unit along the contour of the slot profile with the nozzle outlet facing the contour of the slot profile to approximately uniformly peen the contour of the slot profile.

A dental implant two-piece fixture mount includes an implant fixture-mount base portion at its distal end, and a snap-on, separate, separable top piece at its proximal end, the top-piece including an insertion-tool-engaging surface and a distal cylindrical skirt with a plurality of protrusions on the skirt's inner surface, and a distal insertion projection, the fixture-mount base portion including a separable proximal portion that includes a groove near the bottom of the separable proximal portion for engagement with the protrusions, a longitudinal through passage to receive a fixation screw for attachment of the fixture mount base portion to a dental implant, and that includes an internal, multi-sided region to anti-rotationally engage the distal insertion projection.

An engine mount for a drive unit in a vehicle includes a bracket having first and second joining points for attachment of the bracket to the drive unit. A first mounting member connects the bracket to the drive unit in the first joining point along a first joining axis. An engine mount is arranged on a vehicle body and supports the drive unit via the bracket. A second mounting member connects the bracket to the drive unit in the second joining point along a second joining axis. The first and second joining axes extend at a slant to each other by an axis angle.

A base mounting assembly and a display device are provided. The base mounting assembly includes a main support on a side of a first device, a base including a pedestal part below the first device and a support post connected with the pedestal part and opposite to the main support, the support post including a first end away from the pedestal part and a second end connecting with the pedestal part, and a cushion block movably provided between the support post and the main support. A distance between the support post and the main support is gradually reduced from the first end to the second end so that when the cushion block is moved between the first end and the second end, a position of the support post relative to the main support is changed, causing a change of a position of the pedestal part relative to the first device.

A mount assembly for a mountable device such as a laser unit, such as a hybrid point and line laser that projects a vertical plumb dot(s) up and down, combined with horizontal and plumb projected lines. The mount assembly comprising: a base, a X-axis linear actuator, an upright support, a Y-axis linear actuator, an extension arm, a Z-axis linear actuator, a support plate assembly, and a mount for mounting on the mountable device.

An apparatus for reverse mounting an electronic device in a server housing is provided. The apparatus includes a first bracket, a second bracket, and a coupling. The first bracket couples to the device body and extends outward from the device body toward a front rail of the server housing. The first bracket includes a first end configured to releasably couple to front rail of the server housing. The second bracket includes a protrusion that extends outward from the device body in an opposite direction relative to the first bracket. The coupling includes a first portion that couples to a rear rail of the server housing and a second portion defining a channel that receives the protrusion of the second bracket.

A horse stirrup which also functions as a mounting aid by providing, in the same assembly, a foot supporting platform for riding, as well as a convenient, lower level platform for mounting. The mounting platform, and related structure, also function, in cooperation with the riding platform, to reduce the exposure of the rider to stirrup foot lock in case of a fall.

An exit device includes a rail having opposite first and second ends and a rear portion with a first opening adjacent the first rail end for attachment to the door surface, the first rail end further having a front portion that inhibits access to the first rail opening in a direction normal to the rail rear portion. The method for installing it includes securing a mount having a cantilevered portion extending therefrom to the door at the surface first end such that the mount cantilevered portion provides a space between the cantilevered portion and the door and placing the rail against the door surface such that the mount extends through the first rail opening, sliding the rail to engage the rail rear portion adjacent the first rail opening between the mount cantilevered portion and the door and securing the second rail end to the door surface.

An example method includes providing a packaging device includes a substrate having an integrated circuit die mounting region. A plurality of microstructures, each including an outer insulating layer over a conductive material, are disposed proximate a side of the integrated circuit die mounting region. An underfill material is disposed between the substrate and the integrated circuit die, the microstructures preventing spread of the underfill. In another example method, a via can be formed in a substrate and the substrate etched to form a bump or pillar from the via. An insulating material can be formed over the bump or pillar. In another example method, a photoresist deposited over a seed layer and patterned to form openings. A conductive material is plated in the openings, forming a plurality of pillars or bumps. The photoresist and exposed seed layer are removed. The conductive material is oxidized to form an insulating material.

Free download of You Ain't Got the Heart from the CD Roll With It by the Coffis Brothers & the Mountain Men , currently featured on The Sound. Find out more about the artist here .

Washington citizens give a damn about public records — as proven by the stunning response to legislative efforts to shield their records from public view.