1 Brunei Dollar = 275.9577 Nigerian Naira

1 Brunei Dollar = 6.952 Moroccan Dirham

1 Brunei Dollar = 17.7111 Honduran Lempira

1 Brunei Dollar = 2.5991 United Arab Emirates Dirham

Who used to be known as Dileep Kumar, and is now married to Saira Banu?

Workoutable © 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic

First, the good news. The EDA industry will grow from $6.2 billion in 2015 to $9.0 billion in 2019, according to Gary Smith, chief analyst at Gary Smith EDA. Year-to-year growth rates will range from +4% to +11.2%.

But in his annual presentation on the eve of the Design Automation Conference (DAC 2015), Smith noted that Wall Street is unimpressed. “The people I talk to want long-term steady growth, no sharp up-turns, no sharp downturns,” Smith said. “To the rest of Wall Street, we’re boring.”

Smith spent the rest of his talk noting how EDA can be a lot less boring and, potentially, a whole lot bigger. For starters, what if we add semiconductor IP to EDA revenues? Now we’re looking at $12.2 billion in revenue by 2019, Smith said. (He acknowledged, however, that the IP market itself is going to take a “dip” due to the move towards platform-based IP and away from conventional piecemeal IP).

This still is not enough to get Wall Street’s attention. Another possibility is to bring embedded software development into the EDA industry. This is not a huge market – about $2.6 billion today – but it is an “easy growth market for us,” according to Smith.

Chasing the Big Bucks

But the “big bucks” are in mechanical CAD (MCAD), Smith said. In the past the MCAD market has always been bigger than EDA, but now EDA is catching up. The MCAD market is about $6.6 billion now. Synopsys and Cadence are larger than PTC and Siemens, two of the main players in MCAD.

There may be some good acquisition possibilities coming up for EDA vendors, Smith said – and if we don’t buy MCAD companies, they might buy EDA companies. Consider, for example, that Ansoft bought Apache and Dassault bought Synchronicity. (Note: Siemens PLM Software is a first-time exhibitor at DAC 2015).

What about other domains? Smith said that EDA companies could conceivably move into optical design, applications development software, biomedical design, and chemical design. The last if these is probably the most tenuous; Smith noted that EDA vendors have yet to look into chemical design.

Applications development software is the biggest market on the above list, but that means competing with Microsoft, IBM, and Oracle. “You’re in with the big boys – is that a good idea?” Smith asked.

Perhaps there’s an opening for a “big play” for an MCAD provider. Smith noted that mechanical vendors are focusing on product data management (PDM). This “is really the IT of design,” Smith said. “They have a lot of hope that the IoT [Internet of things] market is going to give them an opportunity to capture the software that goes from the ground to the cloud. Maybe we can let them have PDM and see if we can take the tool market away from them, or acquire it away from them.”

In conclusion, Smith asked, should the EDA industry accelerate its growth? “The mechanical vendors have already shown interest in acquiring EDA vendors,” he said. “We may not have a choice.”

Richard Goering

NOTE: Catch our live blog from DAC 2015, beginning Monday morning, June 8! Click here

Is there a better approach to varying the coefficients of a digital IIR over time to adjust the values of its poles and zeros than just recalculating the whole thing every time it changes? For example, lots of synth programs can apply an LFO to the cutoff frequency of a low/high pass filter. I can do some polynomial multiplication to get the coefficients for an IIR filter given its poles and zeros, but am wondering if there is a better way to adjust them over time than simply doing all the calculations over again for new poles/zeros. Particularly, I'm curious if there is a method that will more or less work for an arbitrary number of poles and zeros. You could use a filter implementation (state space) that directly uses the pole/zero values instead of a polynomial walmartone. That might be computationally more expensive, though (as you are taking a trip through the domain of complex numbers even though your inputs and output are real), and possibly numerically iffy.As far as I am aware, modifying filter behavior while introducing as few artefacts as possible is still an area of research. You might get away with just adjusting the filter coefficients if you do it slowly, but this does not mean this is the best method.In an audio application, I assume they do not switch filter coefficients abruptly, but instead do a cross-fade between the (settled) first filter and the (mostly or completely settled) target filter to avoid audible artefacts.

I have been using Voltus to do IR drop analysis but I got caught on one signal. It is negative. When I use:

set_pg_nets -net negsupply -voltage -5 -threshold -4.5 -package_net_name NEGSUP -force

Voltus dies with a backtrace. Looking at the beginning of the trace you see it suggests that the problem is it set maximum to -5 and minimum to 0. Is there another way to express a negative voltage supply for IR drop analysis?

Hello,

I created a floorplan view in Virtuoso ( it contains pins and blockages). I am trying to run PnR in Innovus for floorplan created in Virtuoso. I used  set vars(oa_fp)    "Library_name cell_name view_name"   to read view from virtuoso. I am able to see pins in Innovus but not the blockages. Can i know how do i get the blockages created in virtuoso to Innovus.

Regards,
Amuu 

Hi Folks, A question that I've often received from designers, "Is there a method to determine the amount of memory required before I submit a job? I use distributed processing and need to provide an estimate before submitting jobs." The answer...(read more)

Did you check out the new Pnoise and Hbnoise Choosing Analyses forms in the MMSIM 15.1 and IC6.1.7 /ICADV12.2 releases? These forms have been significantly improved and simplified. The Direct Plot Form has also been enhanced and is much easy to use....(read more)

Hi,

I want to convert ircx file(which is from TSMC,inclued EM Information) to ict or emDataFile for Voltus-fi.

I tried many way, but I can not make it. Can anyone give me some advice?

and I  do not installed QRC.

below is some tools installed my server. 

IC617-64b.500.21 is used.

Cadence continues to be a leader in SoC verification and has expanded our industry investment in Accellera portable stimulus language standardization. Some customers have expressed reservations that portable stimulus requires the effort of learn...(read more)

I'm trying to generate IBIS models for the parts that I'm designing.  I'm designing using CADENCE Virtuoso.  

I'm wondering if there is a tutorial for generating IBIS models in CADENCE Virtuoso.   Please pardon me if my question is broad.      

I have created a die and other components as symbols in sip and placed the symbols in sip through logic import capture netlist. It shows net connectivity but i couldn't add bond finger from the die pins. Please help on this. 

Emulators are great. They vastly speed up verification to the point where it’s hard to imagine life without them; as designs grow in complexity, simple simulation can’t keep up for the biggest designs. The extra oomph from emulation is almost a necessity for the top percentages of design sizes. However, many users of Palladium aren’t efficiently using their unit’s processing power, and as a result they’re missing out on the full speed-up potential that Palladium can provide.

Altair’s HERO is here for you. With its help, your Palladium unit can be even more amazing for your productivity than before.

HERO (that’s Hardware Emulator Resource Optimizer) adds emulator support to Altair’s Accelerator. You already know and love Altair’s scheduling tools; so why not make them do more for you, so you can be one of those people who are making the most out of their Palladium system?

Emulators are kind of like big computers, but it’s a lot harder to manage leftover resources on an emulator than it is on, say, a CPU. A scheduler like HERO neatly sidesteps this problem by more intelligently using the resources available to ensure that there’s a minimal patchwork of leftover resources to begin with.

HERO supports past generations of Palladium as well, so if you’re still using an older version, you can still take advantage of the upgrades HERO provides. There’s a wide variety of features HERO has that make your emulator easier to use. HERO separates a job into a “select” section and a “run” section: the “select” part makes a last-minute decision on which domains or boards to use, while the “run” part is the actual job. This makes it easier to ensure that your Palladium emulator is being used as efficiently as possible. Jobs are placed using “shapes”, which are a set of job types; these can be selected from a list of pre-defined ones by the user. Shapes can have special constraints if those are needed.

A new reservation system also helps HERO organize Palladium’s processing power better. HERO offers both “hard” reservations and “soft” reservations. A hard reservation locks other users out of reserving any part of the emulator at all, while a soft reservation allows a user to reserve a part of the emulator for a later use. Think of it like this: a soft reservation is like grabbing a ticket from the deli counter, while a hard reservation stops you from ever entering the market.

When using HERO, you can manage your entire verification workload. You’ll find that your utilization of your emulator vastly increases—it’s been reported that some users using only 30% of the capabilities of their Palladium unit(s) saw a massive increase to over 90% once they made the switch to HERO.

If you’re ready to take your Palladium productivity to the next level, Altair has a HERO for you.

To see the full presentation given by Andrea Casotto in the Cadence Theater at DAC 2019, check here.

All PCB designers know the importance of proper power delivery for successful board design. Integrated circuits need the power to turn on, and ICs with marginal power delivery will not operate reliably. Since power planes can...(read more)

Key findings: 5X to 32X faster low-power verification using Palladium XP emulation

It’s hot in July in Korea, and not just the temperature; the ideas, too. The ideas that flowed at CDNLive Korea were exciting, and that includes a very interesting talk by Jiyeon Park from the System LSI division of Samsung Electronics.  His talk, titled “Enabling Low-Power Verification using Cadence Palladium XP,” struck a chord with the audience and the highlights bear sharing in this forum. This blog captures some of the highlights from the public talk in Seoul this summer.

Motivation

If you are familiar with the breadth of the product lines at Samsung Electronics, you will appreciate the diversity of the end-market requirements that they must fulfill. These markets and products include:

Mobile/Handheld

• Smartphones
• Tablets
• Laptops

Consumer/Digital Home

• High-definition/ultra-high-definition TV
• Gaming consoles
• Computers 

Networking/Data Center

• Servers
• Switches
• Communications

What all of these markets have in common is that energy efficiency is now an integral and leading part of the value equation. For design teams, a good knowledge of power helps the evaluation and use of a host of critical decisions. From design architecture, IP make-versus-buy decisions, and manufacturing process selection, to the use of low-power design techniques, all are critically influenced by power.

Using simulation for low-power verification

Once the decision to overlay power reduction design techniques, such as power shutdown, has been made, new dimensions have been added to the already complex SoC verification task. The RTL verification environment is first augmented with a power intent file; in this case, IEEE 1801 was the format.  The inclusion of this power intent information enables the examination of power domain shutdown, isolation operations, proper retention, and level shifting.

Figure 1: Incisive SimVision power verification elements example

Low-power verification using emulation

Simulation for low-power verification works well, so why emulation? One word—complexity!  It is easy to forget that “design complexity” (usually measured in gates or transistors) is not that same as “verification complexity” (which is really hard to measure). Consider a design with four power domains, three of which are switchable and one that is switchable but also has high- and low-voltage states. That yields nine basic states, and 24 modes of operation to test. Although some of those modes may not be consequential, when paired with hundreds or even thousands of functional tests, you can begin to understand the impact of overlaying low power on the verification problem. Thus, it becomes very desirable to enlist the raw computational power of emulation.

Power off/on scenario on Palladium XP platform

A typical functional test would be augmented to include the power control signals. For power shutoff verification, for instance, the cycles for asserting isolation begin the sequence, followed by state retention, and then finally a power shutdown of the domain must be asserted to verify operation. The figure below calls out a number of checks that ought to be performed.

Figure 2: Power shutoff sequence and associated checks to make

IEEE 1801 support in Palladium XP platform

The IEEE 1801 support found in the Palladium PX platform includes some noteworthy capabilities, as well as some implications to the user. First is a patented memory randomization provided by the Palladium XP platform. This capability includes randomization of memory during shutdown and power up, control over read value during the power-off state, non-volatile memory state retention, and freezing of data on retention. The user should be aware there is about a 10%-20% capacity overhead associated with IEEE 1801-driven low-power verification.

Figure 3: Palladium low-power verification enables schedule improvement

Palladium low-power verification flow

The great thing about the emulation work flow for IEEE 1801 power verification is that the only change is to include that IEEE 1801 power intent file during the compilation stage!

Considerations for emulation environment bring-up

A Universal Verification Methodology (UVM) approach was taken by the Samsung team. This provides a unique structure to the testbench environment that is very conducive to a metric-driven methodology.  Using a testbench acceleration interface, teams can run the testbench on a software simulator and the design on the emulator. In addition, the formalism allows for the case of incomplete designs that do not hinder the verification of the parts that are completed.

Experimental results

The most exciting part of the paper was the results that were obtained. For a minor overhead cost in compile time and capacity, the team was able to improve runtimes of their tests by 5X to 32X. Being able run tests in a fraction of the time, or many more tests in the same time, has always been a benefit for emulation users. Now low-power verification is a proven part of the value provided to Palladium XP platform users.

Figure 4: Samsung low-power verification emulation results

Conclusions

The key conclusions found were:

• No modification was needed for IEEE 1801
• There is a small capacity and compile time overhead
• The emulation and simulation match
• The longer the test, the more the net speed up versus software simulation
• Run times improved from 5X to 32X!

With this flow in place, the teams has begun power-aware testing that includes firmware and software verification to go along with the hardware testing. This expansion enables more capability in optimization of the power architecture. In addition, they are seeing faster silicon bring-up in the context of an applied low-power strategy.

Steve Carlson

Hello, i have a realy mistick thing going with copying libraries in cadence virtuoso,

When i copy straight forwart the whole library it gives me a warning that accsess was denied,but when i go into the library and copy it as a single file, then it goes fine.

another problem is it doesnt show in the massage console  ALL the files which could not be copied.(which is the much bigger problem,becuase i would have to pass threw all the subdirectories to verify if all files are there)

Is there a way to see which files wasnt able to be copied?

Thanks. 

Hello , i am trying to extract netlist from a circuit  in assembler

I have found the manual shown bellow , however there is no such option in tools in assembler.

how do i view the NETLIST of this circuit?

Thanks.

ASSEMBLER VIEW menu

Hello, I have a problem with a certain type of transistor,my hyrarchy has a lot components an sub components and visually inspecting them is very hard.

is there a way like in other cadence layout viewer tools , to enter the name of the component or a NET somewhere and it will focus on it visualy or give the hyrarchy path to it?

Thanks.

Hello, i have made a power gain circle for 30dB,for setting a GAIN we need to set a matching network for input and output inpedance.

but in this Gain circles it shows me only one complex number instead of two.(As shown bellow)

Where did i go wrong with using it to find the input and output impedancies needed to be matched in order to have 30dB gain?
Thanks.

Hello, i am trying to produce a gain circles on a simple transistor as shown bellow.

i have defined the range from 1 til 30 dB and i dont get any circle just dots in infinity?

Where did i go wrong?
Thanks.

Hello, i have built a matching network of 13dB gain and  NF as shown bellow step by step.(including all the plots and matlab )

its just not working at all,i am doing it exacly by the thoery

taking a point inside the circle-> converting its gamma to Z_source->converting gamma_s into gamma_L with the formulla bellow as shown in the matlab->converting the gamma_L into Z_L-> building the matching network for conjugate of Z_L and Z_c.Its just not working.

where did i got  wrong?

Thanks.

gamma_s=75.8966*exp(deg2rad(280.88)*i);
z_s=gamma2z(gamma_s,50);
s11=0.99875-0.03202*i
s12=721.33*10^(-6)+8.622*10^(-3)*i
s21=-188.37*10^(-3)+30.611*10^(-3)*i
s22=875.51*10^(-3)-100.72*10^(-3)*i
gamma_L=conj((s22+(s12*s21*gamma_s)/(1-s11*gamma_s)))
z_L=gamma2z(gamma_L,50)

Hello, There is a manual in matlab of matching LNA  shown in the link bellow.

In it as shown in the plot bellow they mention input and output circle plots.

Is there such option of input and output circle in cadence virtuoso?

https://www.mathworks.com/help/rf/examples/designing-matching-networks-part-1-networks-with-an-lna-and-lumped-elements.html

Hi, I'm trying to create a circle from a pin with 10 mil air gap and at 45 degree rotation. The problem that im facing is that, I'm unable to get the bBox upper left coordinates. Because I want my circle to be placed from that coordinate with a 10 mil air gap. And the pins are "regular" and are placed on "Etch/Top" Layer. Kindly help me in solving this issue.

For a project, we depend on capturing warnings. This works fine in Virtuoso but behaves differently in Allegro.

In our observations

Virtuoso:

>>> warn("Hello")

*WARNING* Hello

Allegro:

>>> warn("Hello")

*WARNING* Hello

But when we capture the warning:

Virtuoso:

>>> warn("Hello") getWarn()

"Hello"

Allegro:

>>> warn("Hello") getWarn()

"*WARNING* Hello"

This is a Problem for because we put an empty String in the warn and depend on the fact that no Warning results in an empty String but on Allegro the output always begins with *WARNING*

Is there a way to make the behavior consistent in both versions?

I'm trying to compile a simple verilog file using xmvlog. I run the following command,

"xmvlog myfile.v"

Then I get the following error,

"xmvlog: *F,DIRDEC: Can't save decompressed versions of compressed files."

I used to use xmvlog with no issues, this error started to come up now. The message is not helpful either. How can I solve this?

I appreciate any help, thanks in advance.

I’m not talking about carnival funhouse mirrors, but rather the different options for mirroring symbols, vias, and bond fingers in your IC Package layout. The Allegro Package Designer Plus and SiP Layout tools have two distinct styles of m...(read more)

Hello All,

starting with version 8.1 the contents of the ce_tools directory will no longer
be shipped with Specman. The directory contains some unsupported AE/R&D
ware and has not been updated for several releases (i.e. most of those old
packages don't work with the latest release).
 
Attached is the contents of this directory. Please read the README before
using any of the packages.


Regards,
-hannes

Hi all,

Is there any tutorial which explains the process of plotting the ISF function for a certain oscillator ?

Thank you.

Hi ,

     I have designed analog IP in cadence ADE and simulated in spectre. All corner results looks good. when i run monte carlo 1000 runs have high current in 125C two runs. Simulated with same setup in different user, all clean.Need to know what type sampling method used and why its not clean with my setup.

Thanks,

Anbarasu

Hi,

I want to convert ircx file(which from TSMC) to ict or emDataFile for Voltus-fi.

I tried many way, but I can not make it.

and I  do not installed QRC.

below is some tools installed my server. 

IC617-64b.500.21 is used.

Hello,

I'm reading the Design specification for IP6514E.

We will use the DAC mode.

It would seem to be very simple but I don't see any code sequence, i.e.

  1.Write 03(Basic Read) to this register

  2, Write start adress to this register

  3. Write "execute" to this register

  4. Read the data from this register

Thanks,

Stefan

Bumps are central to the Virtuoso MultiTech Framework solution. Bumps provide a connection between stacked ICs, interposers, packages, and boards. Bump locations, connectivity, and other attributes are the basis for creating TILPs, which we combine to create system-level layouts.(read more)

Since the release of the Automated Device Placement and Routing solution last year, we have continued to improve and build upon it. In this blog, I’ll talk about the latest addition—the Auto Device Array form—how this is an integral piece of the new Automated Device Placement and Routing solution.(read more)

Here is another blog in the multi-part series that aims at providing in-depth details of electromagnetic analysis in the Virtuoso RF solution. Read to learn about the nuances of port setup for electromagnetic analysis.(read more)

The IC6.1.8 ISR10 and ICADVM18.1 ISR10 production releases are now available for download.(read more)

Do you want to create designs that are correct by construction? Read along this blog to understand how you can achieve this by using Width Spacing Patterns (WSPs) in your designs. WSPs, are track lines that provide guidance for quickly creating wires. Defining WSPs that capture the width-dependent spacing rules, and snapping the pathSegs of a wire to them, ensures that the wires meet width-dependent spacing rules.(read more)

If you have one of those Die layouts, which doesn’t have bumps, but rather uses pad shapes and labels to identify I/O locations, then you might be feeling a bit left out of all of this jazz and tango. Hence, today, I am writing to tell you that, fear not, we have a solution for your Die as well.(read more)

We have all heard the sayings “Less is more” and “Keep it simple”. Electromagnetic simulation is an activity where following that advice has enormous payoffs. In this blog I’ll talk about some of my experiences with how Virtuoso RF Solution’s shape simplification feature has helped my customers get significant performance improvements with minimal impacts on accuracy. (read more)

This blog discusses key features of concurrently editing a hierarchical cellview.(read more)

Hello everyone, today I’d like to talk to you about the recent enhancements to Die export in the Virtuoso RF Solution, most of which were released in ICADVM 18.1 ISR10. What’s the background for these enhancements? Exporting an abstract of a Die, which basically represents the outer boundary of the Die with I/O locations, as an intermediate file to exchange information between various Cadence tools (i.e., the Innovus, Virtuoso, and Allegro platforms) is not a new feature. This capability existed even prior to the Virtuoso RF Solution. However, the entire functionality was rewritten from scratch when we first started developing the Virtuoso RF Solution because the previous feature was deemed archaic, its performance and capacity needed to be enhanced, and use model needed to be modernized. This effort has been made in various phases, with the last round being completed and released in ICADVM18.1 ISR10.(read more)

The way you need blocks of different sizes and styles to build great Lego masterpieces, a complex WSP-based design requires stitching together routing regions with multiple patterns that follow different WSSPDef periods. Let's see how you can achieve this. (read more)

visit News18 Urdu for latest news, breaking news, news headlines and updates from Hamirpur on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Lower Subansiri on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Giridih on politics, sports, entertainment, cricket, crime and more.

visit News18 Gujarati for latest news, breaking news, news headlines and updates from Viramgam on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Sant Kabir Nagar on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Sirohi on politics, sports, entertainment, cricket, crime and more.