[allAfrica] We are excited to share the momentous news that Cape Town Pride has officially won the bid to host WorldPride 2028. This significant event is a global celebration of LGBTQ+ pride and rights, marking a pivotal milestone not only for the LGBTQ+ community in the city but also for the entire African continent. This victory positions Cape Town as a leading symbol of inclusivity and diversity, showcasing its commitment to advancing a welcoming environment for all.

I am attempting to use dbGetNeighbor() function inside the dynamic display HUD so that the distance to the next metal on that layer could be viewed. Think of another line in this dynamic table here... 

My SKILL code is essentially the following:

procedure(getNearestNeighborOnMetal(cv)
let((direction tmpBoundingBox)
direction = internal_function()
tmpBoundingBox = dbCreateRect(geGetEditCellView() "tmp" list(hiGetCommandPoint() hiGetCommandPoint()))
car(dbGetNeighbor(geGetEditCellView() tmpBoundingBox direction))
)
)

this returns the distance to the closest metal based on some tests.

Next, I try to register this function to work in the Dynamic Display / Info Balloon world by executing odcRegisterCustomFunc() for each and every object type (I know, absurd, but trying to debug)

In the dynamic display menu, I toggle the "Custom SKILL Function" check in layoutXL, then hit apply, then OK.

After this I find I am unable to view the changes reflected in any info balloons or in the drawing HUD (above) for this wire. I have tried replacing my function with the sample "customFunc" from the odcRegisterCustomFunc() documentation and was still unable to produce any new output.

Any help diagnosing the use of this feature would be very much appreciated

Hello,

I would like to create a button for my form that prompts the user to click on a cellview and draw a rectangle bounding box, exactly like the one used in the Area and Density Calculator. Can someone please help me with this?

Thanks!

Beto

I am scripting gds streamin using 'strmin', which works fine so far.

But, as it apparently doesn't have an option to specify where the cds.lib file is, I have to run it from the directory where the cds.lib file is, or I guess I could create a dummy one to source that one.

Is there a way to tell strmin where the cds.lib file is?

Achieving optimal power transfer in RF PCBs hinges on meticulously routed traces that meet specific impedance requirements. Impedance matching is essential to ensure that traces have the same impedance to prevent signal reflection and inefficient pow...(read more)

When it comes to system integration, PCB designers need to collaborate with the signal analysis or integrity team to run pre-route or post-route analysis and modify constraints, floorplan, or topology based on the results. Allegro PCB Edito...(read more)

Have you ever thought of a handy utility to specify all necessary transmission line parameters to decide upon the stackup?   

Starting SPB 23.1, a handy feature Transmission Line Calculator, is built into Allegro X Advanced Package Designer (Allegro X APD). This feature will require either an SiP Layout license or can be accessed through SiP Layout Bundle. 

From the Analyze dropdown menu in the 23.1 Allegro X APD toolbar, you can choose Transmission Line Calculator. 

You can use this calculator to help decide constraints and stackup for laminate-based PCB or Packages. You can calculate the correct stackup material and width/spacing to meet any requirements that may be later entered in a constraint. This is truly a calculated number and not a true field solver. 

The different types of calculations that the Transmission Line Calculator can provide are Microstrip, Embedded microstrip, Stripline, CPW (Coplanar), FGCPW (frequency-dependent Coplanar), Asymmetric stripline, Coupled microstrip (Differential Pair), Coupled stripline (Differential Pair), and Dual striplines. 

This feature is important for customers relying on fabricators/spreadsheets to provide this information or need to test a quick spacing/width as per the impedance value. 

Let us know your comments on this new feature in 23.1 Allegro X APD. 

By default, a dielectric must separate each pair of conductor layers in the cross-section of a design. In rare cases, this does not represent the real, manufactured substrate.

If your design requires you to have conductor layers that are not separated by a dielectric (such as, for half-etch designs), there is a variable that needs to be set in Allegro X APD. You must set this by enabling the variable icp_allow_adjacent_conductors. This entry, and its location in the User Preferences Editor, are shown in the following image.

The Objects on adjacent conductor layers do not electrically connect together, automatically. A via must be used to establish the inter-layer connections.

When enabling this option, it is recommended to exercise caution because excluding dielectric layers from your cross-section can lead to inaccurate calculations, including the calculations for signal integrity and via heights. It is important that your cross-section accurately reflect the finished product to ensure the most accurate results possible. Any dielectric layers present in the manufactured part need to be in the cross-section for accurate extraction, 3D viewing, and so on.

Let us know your comments on the various designs that would require adjacent conductor layers.

The DBDoctor application checks the database for errors and other problems, and presents a report about them. DBDoctor supports .brd, .mcm, .mdd, .psm, .dra, .pad, .sav, and .scf databases.

DBDoctor can:

• Analyze and fix database problems.
• Eliminate duplicate vias.
• Perform batch design rule checking (DRC).
• Upgrade databases more than one revision old.

To verify the integrity of a drawing database at any time during the design cycle, run DBDoctor at regular intervals but make sure you always run it after completing a design.

You can run DBDoctor to verify work in progress, or from a terminal window outside the layout editor, perhaps to check multiple input designs in batch mode by using wildcards and various switches. You do not have to run the layout editor to use DBDoctor.

To run this from Allegro X APD and Allegro PCB Editor, go to Tools > Database Check.

You can also go to the Start menu and select Cadence PCB Utilities 2023 > PCB DB Doctor 2023.

You can also use the following command to run DBDoctor in batch mode in the system command prompt:

dbdoctor [-check_only] [-drc] [-drc_only] [-shapes][-no_backup] [-outfile <newboardname.brd>]>

Comment below if you want to know more about this command and its integration with SKILL programming!!

Verisium Debug, the Cadence unified debug platform, offers a variety of debugging capabilities, including RTL debug, UVM testbench debug, UPF debug, and DMS debug. From IP to SoC level debug, the user can take the benefits of the rich debugging features to reduce the time for debug.

Not only the common and advanced debug features, Verisium Debug also provides Python-based interface API, which enables capabilities allowing users to customize functions with Verisium Debug Python API to access from design, waveform databases and add functions to Verisium Debug’s GUI for visualization purposes. With Verisium Debug’s Python API, users can turn repetitive works into automatic programs or reduce efforts to create in-house utilities with well-established infrastructure from Verisium Debug.

Here is an example of how the user uses Python API to create a customized function. Users can write a Python program to extract signals in a specific design scope and report the values of the extracted signals. From Fig 1., you can understand the procedure of the traversal steps.

1. Import Python library in Verisium Debug package.
2. Setup the database for traversal.
3. Search the scope with the hierarchy information in the design DB.
4. Query the signal list and the values of the signals.
5. Print out the results.

Fig 1. Procedure of Verisium Debug Python Program

The result from the Verisium Debug Python App can be used for post-process design checking or fed into other utilities in the design flow.

The concept is very straightforward. With Verisium Debug and the Python API environment enabled, you can easily query any information that is stored in the databases of Verisium Debug. The result can be outputted in text format, or you can also use the API to display the results back to Verisium Debug’s GUI.

The Verisium Debug Python API is an important capability and resource for Verisium Debug users. To make Verisium Debug Python API easier to access, from Verisium Debug 24.10 release, Verisium Debug introduced the new Verisium Debug Python App Store.

Fig 2. Verisium Debug App Store

The Python App Store includes ready-to-use Python App examples with the availabilities of original source code documents, which help the user to understand how to start writing an app that fits their use case.

Fig 3. Example apps in Verisium Debug App Store

The Verisium Debug Python App Store can also be used by a team as an app management system. App creators can share the developed apps across teams within their companies. The in-house created apps will become easy to manage, and engineers can easily access the apps from the central location, which makes it possible for users to see the updated available Verisium Debug Apps from the Verisium Debug App Store.

Check the following videos for more information about Verisium Debug Python API:

Customize Verisium Debug with Python API

Verisium Debug Customized Apps with Python API

As a verification engineer, you’re surely looking for ways to automate the debugging process. Have you developed your own scripts to ease specific debugging steps that tools don’t offer? Working with scripts locally and manually is challenging—so is reusing and organizing them. What if there was a way to create your own app with the required functionality and register it with the tool? The answer to that question is “Yes!” The Verisium Debug Python App Store lets you instantly add additional features and capabilities to your Verisium Debug Application using Python Apps that interact with Verisium Debug via the Python API. Join me, Principal Education Application Engineer Bhairava Prasad, for this Training Webinar and discover the Verisium Debug Python App Store. The app store allows you to search for existing apps, learn about them, install or uninstall them, and even customize existing apps. Date and Time Wednesday, November 20, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enroll to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within one hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Like this topic? Take this opportunity and register for the free online course related to this webinar topic: Verisium Debug Training To view our complete training offerings, visit the Cadence Training website Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. Related Courses Xcelium Simulator Training Course | Cadence Related Blogs Unveiling the Capabilities of Verisium Manager for Optimized Operations - Verification - Cadence Blogs - Cadence Community Verisium SimAI: SoC Verification with Unprecedented Coverage Maximization - Corporate News - Cadence Blogs - Cadence Community Verisium SimAI: Maximizing Coverage, Minimizing Bugs, Unlocking Peak Throughput - Verification - Cadence Blogs - Cadence Community Related Training Bytes Introducing Verisium Debug (Video) (cadence.com) Introduction to UVM Debug of Verisium Debug (Video) (cadence.com) Verisium Debug Customized Apps with Python API Please see course learning maps a visual representation of courses and course relationships. Regional course catalogs may be viewed here . *If you don’t have a Cadence Support account, go to Cadence User Registration and complete the requested information. Or visit Registration Help .

This blog describes an efficient way to name the histories saved by the simulation runs in Virtuoso ADE Assembler.(read more)

Hi 

I am looking into chamfering the edge of PCB for Board edge connectors. I have performed fillet command earlier but new to chamfering.

Below is the description :

As seen above, the PCB edge are chamfered in thickness as well as at the corners.

Using OrCAD PCB hotfix S023.

Hi,

So I was trying to update the title block of a schematic that I have. The title block that was on there was out of date . I clicked on place --> title block and was able to find the title block that I need. I also have a .OLB file that contains that title block. Then I created a Netlist with the old BRD file as the input file (To keep it as is but modify changes) but when I do that I still do not see / cannot place the title block that I need. Under Place --> format symbols in Allegro , I do see a title block that is coming from the database (But it's the old one). I don't know what to do at this point and would appreciate any tips. I did make sure that the path to where the library is , is defined in the user preferences. 
I also tried copying the title block under the library folder in capture before creating my Netlist and that did not work either.

Thank you all.

How do we purge/remove the duplicated vias in the same location of the PCB editor? These vias are not the one stacked and they are just blind vias running in internal layers 12-14. I find there is an additional copy of the blind via at the same location. Not sure what caused this issue.

I'd like to be able to edit a footprint for a part in my design without needing to find the footprint filepath and directly open that file in PCB Editor. I see that I can view footprints from Capture, and that doing so shows me the footprint path, but I can't find any way to launch the editor. Is there any way to go directly from a part in a Capture schematic or a placed part in a PCB Editor board design to editing that part's footprint?

Hello,

A mybe silly question came to my mind: When routing sense lines, is it better to hav them as close as possible to DUT or afer the decoupling capacitors ?

Force in red, sense in purple.

Best way is 1 or 2 ?

Thanks in advance and Merry Christmas to everybody !

Hi,

I found that under the Dark Theme of PCB Environment Editor 17.4,

the window background is not all dark, resulting in unclear text display。

As shown in the figure below：

Hi

In the environment I'm currently working, axes are shown for schematic, symbol, and layout views.For schematics and symbols, I'd prefer a dim gray, such that the axes are just visible but not dominant. For the layout, I'd prefer a brighter color. Is there a way to realize this? So far when I change the color of the 'axis' layer in the display resource editor, the axes in all three views get changed together:

Thanks very much for your input!

Hello All,

starting with version 8.1 the contents of the ce_tools directory will no longer
be shipped with Specman. The directory contains some unsupported AE/R&D
ware and has not been updated for several releases (i.e. most of those old
packages don't work with the latest release).
 
Attached is the contents of this directory. Please read the README before
using any of the packages.


Regards,
-hannes

I've heard lots of people asking for a way to generate Makefiles for Specman code, and it seems there are some who don't use "irun" which takes care of this automatically. So I wrote this little utility to build a basic Makefile based on the compiled and loaded e code.

It's really easy to use: at any time load the snmakedeps.e into Specman, and use "write makefile <name> [-ignore_test]".
This will dump a Makefile with a set of variables corresponding to the loaded packages, and targets to build any compiled modules.
Using -ignore_test will avoid having the test file in the Makefile, in case you switch tests often (who doesn't?).

It also writes a stub target so you can do "make stub_ncvlog" or "make stub vhdl" etc.

The targets are pretty basic, I thought it was more useful to #include this into the main Makefile and define your own more complex targets / dependencies as required.

The package uses the "reflection" facility of the e language, which is now documented since Specman 8.1, so you can extend this utility if you want (please share any enhancements you make).

 Enjoy! :-)

Steve.

If you have seen any images or demonstrations of the 17.4-2019 release, the GUI may look ...(read more)

Cadence Clarity 3D Solver supports encrypted component models! Using this functionality, vendors can supply their 3D components, such as connectors, to end customers without revealing the physical IP of these designs. The first connector vendor to take advantage of this functionality is Japan Aviation Electronics (JAE),(read more)

The Allegro PCB Editor Basic Techniques course provides all the essential training required to start working with Allegro® PCB Editor. The course covers all the design tasks, including padstack and symbol creation, logic import, constraints setup...(read more)

Hello, Currently i am designing a 96MHZ crystal oscillator using pierce topology and also I use for amplitude gain control circuit for regulation. The problem is when i run a PSS + Pnoise i get these warnings :

WARNING (CMI-2375): M2: Vgs has exceeded the oxide breakdown voltage of `vbox' = 6 V.
WARNING (CMI-2375): M4: Vgs has exceeded the oxide breakdown voltage of `vbox' = 6 V.
WARNING (CMI-2377): M4: Vgd has exceeded the oxide breakdown voltage of `vbox' = 6 V.
WARNING (CMI-2377): M3: Vgd has exceeded the oxide breakdown voltage of `vbox' = 6.6 V.

and also WARNING (CMI-2682): M5: The bulk-drain junction forward bias voltage (1.38154 V) exceeds VjdmFwd'=851.514mV ,The results are now incorrect because the junction current model has been linearized

Note : i am using Supply 1.2 V hence it is not possible to exceed the oxide breakdown. 

So i am asking why i am getting these warnings , it could be a convergence problem and the Results computed are not corrected.

Also when running DC and transient , i don't get these warnings.

Hi *,

I am simulating a 32kHz high Q crystal oscillator with a pulse shaping circuit. I set up a PSS analysis using the Shooting Newton engine. I set a beat frequency of 32k and used the crystal output and ground as reference nodes. After the initial transient the amplitude growth was already pretty much settled such that the shooting iterations could continue the job.

My problem is: In 5...10% of my PVT runs the simulator detects a frequency divider in the initial transient simulation. The output log says:

Frequency divided by 3 at node <xxx>

The Estimated oscillating frequency from Tstab Tran is = 11.0193 kHz .

However, the mentioned node is only part of the control logic and is always constant (but it has some ripples and glitches which are all less than 30uV). These glitches spoil my fundamental frequency (11kHz instead of 32kHz). Sometimes the simulator detects a frequency division by 2 or 3 and the mentioned node <xxx> is different depending on PVT - but the node is always a genuine high or low signal inside my control logic.

How can I tell the simulator that there is no frequency divider and it should only observe the given node pair in the PSS analysis setup to estimate the fundamental frequency? I have tried the following workarounds but none of them worked reliably:

- extended/reduced the initial transient simulation time

- decreased accuracy

- preset override with Euler integration method for the initial transient to damp glitches

- tried different initial conditions

- specified various oscillator nodes in the analysis setup form

By the way, I am using Spectre X (version 21.1.0.389.ISR8) with CX accuracy.

Thanks for your support and best regards

Stephan

Hello everybody,

As you can find in the attached image, I am trying to simulate a Colpitts oscillator. However, using pss analysis it shows a high output power. 

My question is where is the problem of my structure or simulation setup?

Best,

Hello everyone,

I am trying to perform a load pull simulation of a transistor to verify some gain calculations I made using its S-parameters. Specifically, I have calculated the optimal conjugate impedances for the input and output to later calculate the power dissipated and transmitted in each stage of the transistor. Then, I only varied the output impedance and recalculated these powers, noticing that the power delivered to the load is lower.

Now, what I want to do is simulate this behavior using the Load Pull simulation. I have taken the model shown in the image, but I believe it is a linear model. My question is: if the chosen model is linear, is the load pull simulation accurate? In the calculations I made, nonlinearities are not considered. I don’t want to take nonlinearities into account.

In short, do you have any ideas on how to verify the calculations made with the transistor’s S-parameters through a load pull simulation?

Can you recommend any transistor model that is nonlinear and also has an S-parameter file?

Thank you very much in advance.

Hello everyone,

For my cross-coupled oscillator design, I have a problem with stability analysis. Based on my achieved results which are attached, where is my design problem?

Best,

https://ibb.co/bgKFP4N

https://ibb.co/3FGRLmV

https://ibb.co/pwSZDSF

Hi I noticed that some figures from the old posts in the cadence blogs have been missing.

I think this problem happened before and Andrew Beckett asked the original author to fix the issue:

 Figures missing in the RF Design Blogs article of "Measuring Fmax for MOS Transistors" 

Some of these posts are quite valuable, and would be nice to have access to the figures, which are a very important part of some posts,

Thanks

Leandro

Loading new netlist into 23.1 Apparently it does not like many of the specified footprints or padstacks. I have to open the footprint in 231., save the pad stack then save the footprint. This is very time consuming and frustrating to say the least.

I also get the following message

WARNING(SPMHNI-194): Symbol 'SMD_SOD123_ANODE_PIN1' used by RefDes D30 for device 'DIODE_0_SMD_SOD123_ANODE_PIN1_1N4148W-7-F' not found.

The symbol either does not exist in the library path (PSMPATH) or is an old symbol from a previous release.  

Set the correct library path if not set or use dbdo

     The current version of software is unable to open design smd_sod123_anode_pin1.

The design was last saved using version 16.5 and must be updated using DB Doctor. [help]


Going to DB Doctor does nothing, no option to update a footprint?

Tom

Dear Community,

In OrCAD X Profession, the workspace feature enables the users to store the libraries (Schematic Symbol, Footprint and PSpice Models) and Designs (Schematic and PCB layout) in the cloud workspace.

But storing these libraries and design are stored in servers in the USA, Europe, Asia and Japan Servers.

I don't want to store my designs in any of these servers instead I want to create the workspace in my local PC and store all my libraries and designs in the local workspace.

Is this possible, if possible then can anyone provide the steps/procedure or videos of how to do it?

Regards,

Rohit Rohan

Research by fDi Intelligence reveals which countries receive more than their ‘expected share’ of FDI. 

The chief executive of Ras Al Khaimah Economic Zone (RAKEZ), shares his views over the perks of free zones in emerging markets. 

Tanzania's economy is booming and its tourism sector is thriving. However, concerns about the president's strong-arm tactics and delays in the completion of key infrastructure projects are threatening this growth.

$73.8m mega-project will be the first of its kind in the city.

Announced greenfield projects into China plummeted in early 2020 with the US and Europe taking the lion's share of global foreign investment. 

AstraZeneca will set up a R&D centre and an AI innovation centre in Shanghai, as well as create a $1bn fund that would invest in healthcare start-ups.

Replacing the “nightmare” that was Nafta was a dream of US president Donald Trump – but its replacement appears to favour few groups except for dispute resolution firms.

Wavteq's Henry Loewendahl discusses which sectors retain potential for foreign investment amid the current global crisis 

FDI in the leisure and entertainment sector has risen sharply in recent years, with Asia-Pacific the leading region 

Philomène Dias, director of inward investment at Portuguese investment promotion agency Aicep, on how staff and organisation are working through lockdown.

The dominant priority at major banks is the maximisation of short-term profits rather than serving the public interest

Antwerp’s vice-mayor, Claude Marinower, talks about the city's history as a diverse business location, and its plans to promote traditional industries alongside innovative concepts.

Australia’s proud mining history, the quality of its workers and high working standards were instrumental in bringing Canadian mining and exploration company Kirkland Lake Gold to the Victorian gold fields.

India is one of Australia’s fastest growing tourism markets. Tourism businesses can realise the potential of the Indian market by learning about travellers’ culture and service expectations.

The Government aims to build a “more resilient, more inclusive and more modern” economy. For Austrade’s work, the Government focus on addressing climate change, strengthening ties with strategic partners, diversifying trade and investment, and First Nations people, continues.