Customer Service Needs to Be Met by Appointment, Phone, Email or Online; Crisis Services Continue NEW CASTLE (April 5, 2020) – The Department of Health and Social Services (DHSS) is announcing that all walk-in access to its public offices will end beginning on Monday, April 6, 2020, because of the potential risk for clients and […]

DOVER, Del. – The Polly Drummond Hill yard waste drop-off site near Newark, which opened for the season on Saturday, April 18, was closed to further drop-offs about noon on Sunday because of material capacity and traffic issues. DNREC will work this week to have its contractor shred and remove all the material that was dropped off until the closure, and create a traffic plan with the goal of reopening the site on Saturday, April 25. The site operates Saturdays and Sundays.

A group of Superior Court judgments issued on April 22 impose a total of $6.79 million in civil penalties against a Middletown pawn shop and its operators for violations of Delaware’s racketeering statute. The Department of Justice’s Civil Division secured the judgment as the outcome of a 2017 civil racketeering complaint filed against Gold Fever […]

Social distancing recommended in response to state of emergency.

The post Division offices open but electronic interaction urged appeared first on Division of Historical and Cultural Affairs - State of Delaware.

FOR IMMEDIATE RELEASE Media Contacts: Cynthia Cavett, Marketing Specialist & Public Information Officer Delaware Office of Highway Safety Cynthia.Cavett@delaware.gov 302-744-2743 DUI Initiative Running From July 3rd Through July 7th DOVER, De. (July 1, 2019) – The Delaware Office of Highway Safety (OHS) is pleased to announce that it is reactivating its SoberLift program, in partnership […]

FOR IMMEDIATE RELEASE Media Contacts: Cynthia Cavett, Marketing Specialist & Public Information Officer Delaware Office of Highway Safety Cynthia.Cavett@delaware.gov 302-744-2743 DOVER, Del. (September 15, 2019) – Child Passenger Safety Week is a vital awareness campaign that runs nationwide to promote kids being secured in the right car seat for their age, height, and weight. This […]

Cooperative statewide effort to reduce pedestrian deaths and encourage safe walking habits.

Media Advisory:  November 22, 2019 Initiative reinforces the importance of safe driving behaviors during one of the busiest times of the year WHAT: The Delaware Office of Highway Safety (OHS) is launching its new Safe Family Holiday Campaign, as well as reactivating the SoberLift initiative ahead of Thanksgiving weekend. Through a combination of tactics – traditional […]

WILMINGTON, Del. – Governor Carney on Friday announced the State of Delaware will host Government Efficiency & Accountability Review (GEAR) public meetings in each county as part of an ongoing review of state regulations. Governor Carney and members of his cabinet will host the meetings, and accept public comment on ways to improve state government […]

Office of Highway Safety Suspends SoberLift® Program for St. Patrick’s Day *MEDIA ALERT* March 15, 2020  WHAT: The Delaware Office of Highway Safety (OHS) is suspending its SoberLift program as of 9 p.m. on Sunday, March 15, through Wednesday, March 18 at 2 a.m., statewide, due to growing concern for the health and safety of […]

After a lengthy teaser campaign, Meizu finally unveiled its latest flagships with the Meizu 17 and 17 Pro. Spec-wise the two are nearly identical with the Pro featuring better auxiliary cameras, wireless charging and faster RAM. Visually the two are also almost indistinguishable with the only difference being the 17 Pro comes with a ceramic back. These are also the first 5G entries in Meizu's lineup. The Meizu 17 duo is built around 6.6-inch Super AMOLED displays with 90Hz refresh rate and a first for Meizu punch-hole cutout for the 20MP selfie camera. The panels come with an...

The Redmi 9 just popped up on Xiaomi's global RF certification page, confirming that the phone exists and its model number - M2004J19G. This number was also spotted in a batch of devices that were recently certified by the 3C. These certifications don't reveal much. A related model, the M2004J19C, is listed at the 3C with a 10W charger, though that would be a weird downgrade - both the Redmi 8 and the cheaper 8A support 18W charging. Anyway, these will be 4G phones, which probably comes as no surprise. Previous leaks showed a photo of the quad camera on the back of the phone, which...

BS-VI Honda SP125 is a successor to the CB Shine and has been upgraded inside and out. It is powered by a new 124cc BS-VI engine and it gets new features like silent start, LED headlamp, new pass switch. Abhilasha Singh takes out for a ride around Mumbai to find out more.

January serves as National Slavery and Human Trafficking Awareness Month, culminating in the annual observation of National Freedom Day on February 1. For many, this month presents an opportunity to refocus efforts to slow, and ultimately stop, human trafficking around the globe, but especially here in the United States. The [...]

The post Analytics can help combat the horrors of human trafficking appeared first on Government Data Connection.

To ensure hygiene while transporting, the drivers of UberMedic were trained in safety procedures and also provided with personal protective equipment and disinfectants, it said.

A court document has surfaced showing that Tara Reade – a former Senate staffer for Joe Biden who has accused him of sexual assault – told her then-husband she was harassed while working in his office.
Read Full Article at RT.com

Tony Ferguson and Justin Gaethje have both successfully made weight ahead of the UFC's first fight card in nearly two months on Saturday night, in what promises to be a fiercely violent affair between the two lightweight stars.
Read Full Article at RT.com

The government of Denmark is having a negotiation with the industry regarding improvement of energy efficiency. The mutual agreement of 2012 has the ability to cut 12 per cent of energy usage in 2020, as compared to the same calculated in 2006. The agreement…

Two weeks ago we looked at the first two steps in effecting forecasting process change: Justify your suspicions with data Communicate your findings That was the easy part. So why is it that so many organization realize they have a forecasting problem, yet are unable to do anything about it? [...]

The post The difficult step in effecting forecasting process change (1 of 2) appeared first on The Business Forecasting Deal.

Fildes and Goodwin (F&G) observed the subject (the regional subsidiary of a pharmaceutical company) was using a statistical forecasting system, but not fully trusting its output. Forecasters were making overrides to the system generated forecast to make it look like what they believed it should (e.g., following a life-cycle curve [...]

The post The difficult step in effecting forecasting process change (2 of 2) appeared first on The Business Forecasting Deal.

Companies need to seek permission from the local administration – the office of the district magistrate – by submitting a host of information. Apart from the process being tedious and time-consuming, the final decision rests at DM's discretion.

Sets a new record for ‘highest fuel efficiency on a motorcycle’ at 76.4kpl

More than 77,000 people have recovered from it so far, mostly in China where the outbreak started late last year.

The 38-year-old Gambhir picked KL Rahul, who has been keeping in ODIs, as an "apt replacement" for Dhoni.

The ocean has deep secrets. It is a world as vibrant as the one outside. There is a unique ecology that defies common knowledge and often perplexes scientists. This barely-explored territory is also believed to hold vast quantities of precious metals and minerals that can sustain the modern world for centuries. So it is not […]

An internet diversion that rerouted data traffic through Russia and China disrupted several Google services on Monday, including search and cloud-hosting services.

Ivanka Trump, the president’s daughter and a top White House adviser, sent hundreds of e-mails about government business from a personal e-mail account last year, The Washington Post reported on Monday.

As President Donald Trump shows his eagerness for the coming 2020 re-election battle, the first lady's fervour for participating in the effort is not that clear.

S&P Global Ratings on Saturday affirmed HDFC Bank’s issuer credit rating at BBB-/Stable/A-3 and senior unsecured rating at BBB-, adding that the lender’s rating will move in tandem with that of the sovereign.

Connecting over a quick video call with a teammate (or two) every day to talk about your respective days can be a big help.

Elon Musk and Grimes would not be the only celebrity couple to pick an unusual name for their child. Here are some other unusual celebrity baby names.

It has been over 16 year since Harold D'Souza arrived in the United States. He wanted to build a better life for himself and his family in the land of opportunities. Instead, Mr D'Souza ended up...

A bridge in China was temporarily closed to public after it was filmed swaying up and down because of strong winds.

We all know that a smartphone is a lot more than the sum on its parts. The upcoming LG Velvet may not have all the flagship-tier components that we all crave, but a newly leaked video shows that the company is finally making design a high priority.While renders, sketches and official photos of the LG ...

Looking to help breathe some new life into your laptop or desktop? Updating to Windows 10 is going to be a huge step forward for any laptop running Windows 7 or 8 and with the deals that VIP-SCDKey is running at the moment, you can get it done for less than $15.You can check out ...

RBI Committee recommendations for improving efficiency of bank employees

Moodys Investor Services has affirmed the baseline credit assessment (BCA) for 3 Indian Banks but has downgraded 2 banks.

Winds are from the West at 27.6 gusting to 35.7 MPH (24 gusting to 31 KT). The pressure is 1010.6 mb and the humidity is 50%. The wind chill is 25. Last Updated on May 9 2020, 11:53 am EDT.

Researchers highlight risk of asymptomatic infection, as Europe begins easing lockdown

• Coronavirus – latest updates
• See all our coronavirus coverage

More than 10 times as many people in Germany as thought may have been infected with coronavirus, researchers have said, as Italy led swathes of Europe out of lockdown and officials said the continent’s outbreak was mostly past its peak.

Researchers from Bonn University said on Monday that their preliminary study, based on fieldwork in the town of Gangelt in Heinsberg municipality, which had one of Germany’s highest death tolls, showed the risk of infection by asymptomatic carriers.

Coronavirus has infected more than 3.5 million people and caused nearly 250,000 deaths worldwide, according to the Johns Hopkins University tracker.

China’s state broadcaster CCTV attacked the US secretary of state’s “insane and evasive remarks” on the origins of the pandemic. Mike Pompeo said there was “enormous evidence” to show the virus originated in a lab in China.

As Donald Trump presses states to reopen their economies, his administration is privately projecting daily deaths will almost double to about 3,000 by 1 June, according to an internal document seen by the New York Times.

Japan’s prime minister, Shinzo Abe, extended the country’s national state of emergency to 31 May, adding that he would consider lifting it earlier if experts decided that was possible based on regional infection trends.

World leaders, with the exception of Trump, stumped up nearly €7.4bn (£6.5bn) to research Covid-19 vaccines and therapies, pledging the money would also be used to distribute any vaccine to poor countries on time and equitably.

Differentiating good IP from mediocre or bad IP is getting more difficult, in part because it depends upon how and where it is used and in part, because even the best IP may work better in one system than another—even in chips developed by the same vendor.  

So, how do you measure IP quality and why it is so complicated?

The answer depends on who is asking. Most of the time, the definition of IP quality depends on your vantage point.  If you are an R&D manager, IP quality means something. If you are a global supply manager, IP quality means something else. If you are an SoC start-up, your measure of quality is quite different from that of an established fabless company. If you are designing IP in-house, then your considerations are very different than being a commercial IP vendor. If you are designing an automotive SoC, then we are in a totally different category. How about as an IP vendor? How do you articulate IP quality metrics to your customers?

This varies greatly by the type of IP, as well. When it comes to interface (hard) IP and controllers, if you are an R&D manager, your goal is to design IP that meets the IP specifications and PPA (power, performance, and area) targets. You need to validate your design via silicon test chips. This applies to all hard PHYs, which must be mapped to a particular foundry process. For controllers that are in RTL form—we called these soft IP—you have to synthesize them into a particular target library in a particular foundry process in order to realize them in a physical form suitable for SoC integration. Of course, your design will need to go through a series of design validation steps via simulation, design verification and passing the necessary DRC checks, etc. In addition, you want to see the test silicon in various process corners to ensure the IP is robust and will perform well under normal process variations in the production wafers.

For someone in IP procurement, the measure of quality will be based on the maturity of the IP. This involves the number of designs that have been taped out using this IP and the history of bug reports and subsequent fixes. You will be looking for quality of the documentation and the technical deliverables. You will also benchmark the supplier’s standard operating procedures for bug reporting and technical support, as well as meeting delivery performance in prior programs. This is in addition to the technical teams doing their technical diligence.

An in-house team that is likely to design IP for a particular SoC project will be using an established design flow and will have legacy knowledge of last generation’s IP. They may be required to design the IP with some reusability in mind for future programs. However, such reusability requirements will not need to be as stringent and as broad as those of commercial IP vendors because there are likely to be established metrics and procedures in place to follow as part of the design team’s standard operating procedures. Many times, new development based on a prior design that has been proven in use will be started, given this stable starting point. All of these criteria help the team achieve a quality outcome more easily.

Then, if designing for an automotive SoC, additional heavy lifting is required.  Aside from ensuring that the IP meets the specifications of the protocol standards and passes the compliance testing, you also must pay attention to meeting functional safety requirements. This means adherence to ISO 26262 requirements and subsequently achieving ASIL certification. Oftentimes, even for IP, you must perform some AEC-Q100-related tests that are relevant to IP, such as ESD, LU, and HTOL.

To read more, please visit: https://semiengineering.com/why-ip-quality-is-so-difficult-to-determine/

Modern systems-on-a-chip (SoCs) continue to increase in complexity, adding more components and calculation power to accommodate new performance-hungry applications such as machine learning and autonomous driving.  With increased number of SoC components, such as CPUs, GPUs, accelerators and I/O devices, comes increased demand to correctly model interoperability of various components. Traditional simulation of complex systems requires accurate models of all components comprising the system and normally results in very long simulation times. A better way is to create a set of typical traffic profiles which describe behavior of system’s masters and slaves. Such profiles should be abstract to be applied to various protocols and interfaces and be portable to be applied throughout different SoC design and verification cycles.

To address the challenges outlined above, Arm has recently announced availability of the AMBA® Adaptive Traffic Profiles (AMBA ATP) specification which lays foundation of a new synthetic traffic framework. The AMBA ATP specification includes detailed information of various transaction types and timing characteristics of those transactions. The traffic profiles defined in the specification are abstract in nature and thus could be used to generate stimuli for various standard AMBA protocols and in various environments such as RTL-based simulation, FPGA prototyping and final SoC verification. The traffic profiles outlined in the specification include a set of parameters to define timing relationships between transactions as well as timing relationships within individual transactions. Even though the traffic profile represents the behavior of a single agent it could be applied either in a concurrent manner (e.g. write and read traffic profiles running in parallel) or in a sequential manner (e.g. when one traffic completes before the next one start). Moreover, when simulating a reasonably complex system, it is possible to coordinate traffic profiles generated by multiple components. While providing abstract definition of traffic profiles, the AMBA ATP specification focuses on the use of traffic profiles with an AMBA AXI interface, outlining signaling, timing relationships between different transaction phases and between different transactions. The same application principles could be used to map the abstract traffic profiles to other AMBA protocols such as AMBA5 CHI protocol.  

To facilitate adoption of the AMBA Adaptive Traffic Profiles, Cadence has recently announced availability of SystemVerilog UVM ATP Sequence Layer which automatically implements mapping of an abstract ATP traffic to AMBA protocol specific traffic, generated by Cadence AMBA Verification IP. The ATP layer is implemented as a SystemVerilog UVM virtual sequence with the sequence item including all ATP transaction parameters as defined in the specification.

Using the provided sequence infrastructure, users can write tests to define and coordinate traffic profiles for various components in the system. The ATP Layer automatically converts the abstract traffic profile into AMBA protocol-specific traffic, e.g., AMBA5 CHI protocol traffic.

 A sample code below, shows an example of a read profile translated by Cadence ACE Verification IP in ACE protocol traffic.

   `uvm_do_with(ace_atp_vseq,                                            

                       {ace_atp_vseq.agentId == agent_id;                                // ATP agent id

                        ace_atp_vseq.atpDirection == ATP_READ;                    // direction of bursts issued by virtual sequence

                        ace_atp_vseq.startAddress == start_address;                // start of address range being accessed

                        ace_atp_vseq.endAddress == end_address;                  // end of address range being accessed

                        ace_atp_vseq.atpDomain == atp_domain;                      // domain to use for transactions

                        ace_atp_vseq.addressPattern == ATP_SEQUENTIAL;  // address pattern

                        ace_atp_vseq.transactionSize == 64;                             // number of bytes in each burst

                        ace_atp_vseq.dataSize == 4;                                          // number of bytes in each transfer

                        ace_atp_vseq.rate == 150.0/(50.0);                                // requestedBandwidth / clkFrequency

                        ace_atp_vseq.start == ATP_EMPTY;                              // start condition of the ATP FIFO

                        ace_atp_vseq.full == 128;                                               // full level of the ATP FIFO

                        ace_atp_vseq.numOfTransactions == 500;                    // number of bursts issued by this sequence

                        ace_atp_vseq.ARTV == 2;                                              // sub-transaction delay

                        ace_atp_vseq.RBR == 3;                                                // sub-transaction delay

                       });

In addition to the ATP Layer for Cadence Simulation-Based AMBA Verification IP, Cadence supports the ATP functionality in Acceleration-Based AMBA Verification IP. For detailed information about ATP support in Cadence Simulation-Based and Acceleration-Based Verification IP, visit ip.cadence.com.

USB4 can simultaneously tunnel USB3, PCIe and DisplayPort native protocol traffic through a hierarchy of USB4 routers. The key to tunneling of these protocols is routing table programmed at each ingress adapter. An entry of a routing table maps an incoming HopID, called Input/Ingress HopID to a corresponding pair of Output/Egress Adapter and Egress/Output HopID.

The responsibility of programming routing tables lies with the Connection Manager. Connection Manager, having the complete view of the hierarchy of the routers, programs the routing tables at all relevant adapter ports. Accordingly, the USB3, PCIe and DisplayPort protocol tunneled packets are routed, and reach their respective intended destinations.

The diagrammatic representation below is an example of tunneling of USB3 protocol traffic from USB4 Host Router to USB4 Peripheral Device Router through a USB4 Hub Router. The path from USB3 Host to USB3 Device is depicted by routing tables indicated at A -> B -> C -> D, and the one from USB3 Device to USB3 Host by routing tables indicated at E -> F -> G -> H . Note that the Input HopID from and Output HopID to all three protocol adapters for USB3, PCIe and DisplayPort Aux traffic, are fixed as 8, and for DisplayPort Main Link traffic are fixed as 9.

Once the native protocol traffic come into the transport layer of a USB4 router, the transport layer of it does not know to which native protocol a tunneled packet belongs to. The only way a transport layer tunneled packet is routed through the hierarchy of the routers is using the HopID values and the information programmed in the routing tables.

The figure below shows an example of tunneling of all the three USB3, PCIe and DisplayPort protocol traffic together. The transport layer tunneled packets of each of these native protocols are transported simultaneously through the routers hierarchy.

 Cadence has a mature Verification IP solution for the verification of USB3, PCIe and DisplayPort tunneling. This solution also employs the industry proven VIPs of each of these native protocols for native USB3, PCIe and DisplayPort traffic.

Avaya IP Office (IPO) versions 9.1.0 through 10.1 suffer from an active-x buffer overflow vulnerability.