Read the in depth Review of Samsung Galaxy S21 FE 5G Mobile Phones. Know detailed info about Samsung Galaxy S21 FE 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy S22 Mobile Phones. Know detailed info about Samsung Galaxy S22 configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Tab S8+ Tablets. Know detailed info about Samsung Galaxy Tab S8+ configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy A53 5G Mobile Phones. Know detailed info about Samsung Galaxy A53 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Book2 Pro Laptops. Know detailed info about Samsung Galaxy Book2 Pro configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy S22+ Mobile Phones. Know detailed info about Samsung Galaxy S22+ configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of MSI MAG Z690 TOMAHAWK WIFI Motherboard PC Components. Know detailed info about MSI MAG Z690 TOMAHAWK WIFI Motherboard configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy M53 5G Mobile Phones. Know detailed info about Samsung Galaxy M53 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Z Fold 4 5G Mobile Phones. Know detailed info about Samsung Galaxy Z Fold 4 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Z Flip 4 5G Mobile Phones. Know detailed info about Samsung Galaxy Z Flip 4 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Buds2 Audio Video. Know detailed info about Samsung Galaxy Buds2 configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Buds2 Pro Audio Video. Know detailed info about Samsung Galaxy Buds2 Pro configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy S23 Mobile Phones. Know detailed info about Samsung Galaxy S23 configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy S23 Ultra 5G Mobile Phones. Know detailed info about Samsung Galaxy S23 Ultra 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy A34 Mobile Phones. Know detailed info about Samsung Galaxy A34 configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy M14 5G Mobile Phones. Know detailed info about Samsung Galaxy M14 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy F54 Mobile Phones. Know detailed info about Samsung Galaxy F54 configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of MSI Titan GT77 HX 13VI 13th Gen Core i9-13950HX Laptops. Know detailed info about MSI Titan GT77 HX 13VI 13th Gen Core i9-13950HX configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of MSI Cyborg 15 A12VE Laptops. Know detailed info about MSI Cyborg 15 A12VE configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy M34 5G Mobile Phones. Know detailed info about Samsung Galaxy M34 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Z Fold 5 5G Mobile Phones. Know detailed info about Samsung Galaxy Z Fold 5 5G configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Z Flip 5 Mobile Phones. Know detailed info about Samsung Galaxy Z Flip 5 configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Samsung Galaxy Book3 Pro 360 Laptops. Know detailed info about Samsung Galaxy Book3 Pro 360 configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

When the SAS Global Forum 2020 conference was cancelled by the global COVID-19 pandemic, I felt sorry for the customers and colleagues who had spent months preparing their presentations. One presentation I especially wanted to attend was by Bucky Ransdell and Randy Tobias: "Introducing PROC SIMSYSTEM for Systematic Nonnormal Simulation". [...]

The post Introducing PROC SIMSYSTEM in SAS Viya appeared first on The DO Loop.

At least five people were killed this morning after their speeding car rammed a truck that had broken down and was parked on the roadside in Noida.

According to the latest rumors, the Samsung Galaxy Z Flip FE could be powered by the Exynos 2400 chipset which is surprising.

The post Samsung Galaxy Z Flip FE chipset of choice could surprise you appeared first on Phandroid.

Samsung is running some Black Friday deals for its foldables like the Galaxy Z Fold 6 and Flip 6, so what are you waiting for?

The post Grab the Samsung Galaxy Z Fold 6 and Flip 6 at incredible Black Friday prices! appeared first on Phandroid.

If you’re in the market for a new Android tablet, check out these early Black Friday deals for the Samsung Galaxy Tab S10 series.

The post Check out these Samsung Galaxy Tab S10 early Black Friday deals and SAVE BIG! appeared first on Phandroid.

Samsung has an early Black Friday deal for its accessories and wearables, so don’t miss out if you want some savings!

The post INCREDIBLE early Black Friday deal saves you on Samsung wearables and accessories! appeared first on Phandroid.

[SAPS] One hundred and seventy one (171) murder suspects, 261 attempted murder suspects and 250 suspected rapists were among 12 593 suspects who were arrested during various operations by police in KwaZulu-Natal in the month of October. During such operations police also managed to recover 345 firearms and 2 998 rounds of ammunition of various calibre of firearms. Among the recovered firearms were 23 rifles and 17 homemade illegal guns.

[GroundUp] Former Lavender Hill gangster died on 29 October

[SAnews.gov.za] Twenty-three people in Gauteng have died as a result of food borne-related poisoning after consuming food from spaza shops.

[Premium Times] In September, Tyla made headlines at the MTV Video Music Awards (VMAs) for winning the "Best Afrobeats," but she stirred debate by clarifying that she identified with the Amapiano genre rather than Afrobeats

As vehicles transition into interconnected ecosystems, artificial intelligence and advanced technologies become increasingly crucial. Infotainment systems have evolved beyond mere music players to become central hubs for connectivity, entertainment, and navigation. With global demand for comfort, convenience, and safety rising, the automotive infotainment market is experiencing significant growth. Valued at USD14.99 billion in 2023, it is projected to grow at a compound annual growth rate (CAGR) of 9.9% from 2024 to 2030.

To keep pace with this evolution, infotainment systems must accommodate a range of workloads, including audio, voice, AI, and vision technologies. This requires a flexible, scalable Digital Signal Processor (DSP) solution that acts as an offload engine for the main application processor. Integrating a single DSP for varied functions offers a cost-effective solution for high-performance, low-power processing, which aligns well with the needs of Electric Vehicles (EVs).

If you missed the detailed presentation by Casey Ng, Product Marketing Director at Cadence at CadenceLIVE 2024, register at the CadenceLIVE On-Demand site to access it and other insightful presentations. Stay ahead of the curve and explore the future of innovative electronics with us.

Cadence Infotainment Solution: Leading the Charge

Cadence Tensilica HiFi DSPs play a crucial role in enhancing audio capabilities in vehicle infotainment systems. They support applications like voice recognition, hands-free calling, and deliver immersive audio experiences. This technology is also paramount for features such as active noise control, which reduces road and cabin noise, and acoustic event detection for identifying unusual sounds like broken glass. One notable innovation is the "audio bubble," enabling personalized audio zones within the vehicle, ensuring passengers enjoy distinct audio settings.

Cadence HiFi DSP technology enriches the driving experience for electric vehicles by mimicking traditional engine sounds, while its advanced audio processing ensures optimal performance across various digital radio standards. It significantly contributes to noise reduction, hence improving the cabin experience. Integrating a Double Precision Floating Point Unit (FPU) stands out, as it upgrades audio performance and Signal-to-Noise Ratio (SNR) through efficient 64-bit processing, allowing control over numerous speakers without hitches.

These advancements distinguish the DSP as an essential tool in evolving infotainment systems, offering unmatched performance and adaptability. Tensilica HiFi processors, crucial to advanced infotainment SoCs, serve as efficient offload processors, augmenting real-time execution and energy efficiency. Cadence’s ecosystem, with over 200 codecs and software partnerships, propels the evolution of innovative infotainment systems. Introducing the HiFi 5s DSP marks a new era in connected car experiences, setting the stage for groundbreaking advancements.

Exploring Tomorrow with HiFi 5s DSP Technology

The HiFi 5s represents the apex of audio and AI digital signal processing performance. Built on the Xtensa LX8 platform, it introduces capabilities like auto-vectorization, which allows standard C code to be automatically optimized for performance. This synergy of hardware and software co-design marks a significant step forward in DSP technology. By leveraging its extended Single Instruction, Multiple Data (SIMD) capabilities alongside features like a double-precision floating-point unit (DP_FPU), the HiFi 5s delivers unparalleled precision and speed improvements in signal and audio processing tasks. Equally notable are its branch prediction and L2 cache enhancements, which optimize system performance by refining the control code execution and recognizing codec efficiency. The application of such enhancements are particularly beneficial in real-world scenarios.

AI-Powered Audio

Cadence's focus on AI integration with the HiFi 5s demonstrates significant improvements in audio clarity through AI-powered solutions.

• AI models learn from real-world data and adapt dynamically, while classic DSP algorithms rely on fixed rules.
• AI can be fine-tuned for specific scenarios, whereas classic DSP lacks flexibility.
• AI handles extreme and marginal noise patterns better, generalizes well across different environments, and is robust against varying noise characteristics.

Cadence's dedication to artificial intelligence marks a pivotal shift in audio processing. Traditional DSP algorithms, bound by rigid rules, are eclipsed by AI's ability to learn dynamically from real-world data. This adaptability equips AI models to tackle challenging noise patterns and offer unmatched clarity even in noisy environments, making them ideal for automotive and consumer audio applications.

Realtime AI-Optimized Speech Enhancements by OmniSpeech and ai|coustics

OmniSpeech

Our partner, OmniSpeech, has advanced AI-based audio processing that enhances the performance of audio software, specifically for omnidirectional and dipole microphones. Impressively, their technology operates with less than 32MHz and requires only 418kB of memory.

Test results show that background noise is significantly reduced when AI employs a single omnidirectional microphone, outperforming non-AI solutions. Additionally, when using a dipole microphone with AI, there is a 3.5X improvement in the weighted Signal-to-Noise Ratio (SNR) and more than a 28% increase in the Global Mean Opinion Score (GMOS) across various background noise.

ai|coustics

ai|coustics, a Cadence partner specializing in advanced audio technologies, utilizes real-time AI-optimized speech enhancement algorithms. They leverage an extensive speech-quality dataset containing thousands of hours and 100 languages to transform low-quality audio into studio-grade audio. Their process includes:

• De-reverb, which eliminates room resonances, echoes, and reflections

• Removing artifacts from downsampling and codec compression

• Dynamic and adaptive background noise removal

• Reviving audio materials with analog and digital distortions

• Providing support for all languages, accents, and a variety of speakers

Applications include:

• Automotive: Enhances clarity of navigation commands and communication for driver safety

• Consumer audio: Improves voice clarity for better dialogue understanding in TV programs. Optimizes speech intelligibility in communication for both uplink and downlink audio streams

• Smart IoT: Boosts voice command detection and response quality

Performance Enhancements

The advancements in branch prediction and L2 cache integration have significantly boosted performance metrics across various systems. With HiFi 5s, branch prediction increases codec efficiency by an average of 5%, reaching up to 16% in optimal conditions. L2 cache improvements have drastically enhanced system-level performance, evidenced by a 2.3X boost in EVS decoder efficiency. Adding MACs and imaging ISA in imaging use cases has led to substantial advancements. When comparing HiFi 5s to HiFi 5, imaging ISA performance improvements range with >60% average performance improvements.

The Crescendo of the Future

As Cadence continues to blaze trails in DSP technology, the HiFi 5s emerges as the quintessential solution for consumer and automotive audio use cases. With a robust framework for auto-vectorization, an unmatched double-precision FPU, AI-driven audio solutions, and comprehensive system enhancements, Cadence is orchestrating the next era of audio processing, where every note is clearer, every sound richer, and every experience more engaging. It is not just the future of audio—it's the future of how we experience the world around us.

 Discover how Cadence Automotive Solutions can transform your business today!

Hi to all,

I am trying to write an SKILL code to create a schematic. In my code I use "instTerms" to obtain the terminals of an instantiated cell (Let's imagine it is a simple NMOS which is given as a predesigned cell), and then I will connect a wire to each of the terminals. When I run the whole code by command line, the returned terminals by "instTerms" are empty(nil) but when I try to debug it line by line it works properly. As more information, I call it for the instantiated cell, and I should say the cell is instantiated without any problem. This is just the problem of finding its terminals. 

Does anybody have any idea?

Thank you very much in advance.

Amir

One of the key goals for USB4 is to retain compatibility with the existing ecosystem of USB3.2, USB 2.0 and Thunderbolt  products, and the resulting connection scales to the best mutual capability of the devices being connected. USB4 is designed to work with older versions of USB and Thunderbolt . USB4 Fabric support high throughput interconnects of 10 Gbps (for Gen 2) and 20 Gbps (for Gen 3) and supports Thunderbolt 3-compatible rates of 10.3125 Gbps (for Gen 2) and 20.625 Gbps (for Gen 3). It becomes very important to verify the Thunderbolt  backward compatibility with the designs. Though the support of USB4 Interoperability with Thunderbolt  3 (TBT3) is optional in USB4 host or USB4 peripheral device and required USB4 Hub and USB4 Based Dock but it is very essential to work in the existing ecosystem. 

Few Main features of USB4 Interoperability with Thunderbolt  3 (TBT3) Systems

• Support for Bi-Directional Pins & Retimers: TBT3 Active Cables can contain two bidirectional Re-timers which have the capability to send AT Responses on its RX channel. Router connected directly to such Retimer needs to support A Router that is connected directly to a bidirectional Re-timer shall support reception of Transactions on both TX and RX channels. 

• Bounce Mechanism: This feature is used by Router to access the Register Space of a Cable Re-timer that can only be accessed by its Link Partner.
• Asymmetric Negotiation: The Router which connects with Cable Retimers needs to follow Asymmetric TxFFE in Phase 5 of Lane Initialization. 
• USB4 Link Transitions: In TBT3 mode, the configuration of two independent Single Lane Links can be used non-transient state or Single Lane Link just using the Lane1 Adapter.

Cadence has a mature USB4 Verification IP solution that can help in the verification of USB4 designs with TBT3. Cadence has taken an active part in the Cairo group that defined the USB4 specification and has created a comprehensive Verification IP that is being used by multiple members. If you plan to have a USB4-compatible design, you can reduce the risk of adopting new technology by using our proven and mature USB4 Verification IP. Please contact your Cadence local account team, for more details.

The vision manager is good tool for routing check. but no quickly or effective  tool to fix or optimize this  problems to be optimized.

For example, parallel Gap less than preferred, min seg/Arc length,uncoupled diff-pair segs，and so on.

I only know use spread between voids to fix the non-optimized segs. in fact it is inefficient.

the parallel gap less than preferred is only to slice evry trace, its inefficient.

If i set the paraller gap less than 50um, Is there any tool to quickly fix these problems（gap less than 50um）?

For other problems，i can use tool to quickly fix the min seg/Arc length，uncoupled diff pair segs，accoding to select by polygon or select  by windows.

DDR5 is the latest generation of PCDDR memory that is used in a wide range of application like data centers, Laptops and personal computers, autonomous driving systems, servers, cloud computing, and gaming are now increasingly being used for AI applications with advances in memory bandwidth and density to allow DDR5 DIMMs (Dual Inline Memory Modules) to support densities higher then 256 GB per DIMM card. The highest speed DDR5 SDRAM devices can support data rates of up to 8800 MTps.

DDR5 SO-DIMMs and UDIMMs

One of the most recognized uses of PCDDR is with client devices like laptops and personal computers. These client devices mostly use two types of DDR5 DIMMs called SO-DIMM (Small Outline Dual Inline Memory Module) and UDIMM (Unbuffered Dual Inline Memory Module).

These types of DIMMs have no signal regeneration or buffering (which, for example, the Registering Clock Driver or the RCD does for clocks/command/control signals for a registered DIMMs). A typical 2-Rank UDIMM with x8 DDR5 SDRAM components has 8 or 10 components per rank depending on the system ECC (Error Correction Code) memory being part of the DIMM.

Why DDR5 Clock Buffer and CUDIMM?

Clocks are one of the most important signals for synchronous devices, and DDR5 SDRAMs are no exception. The host is responsible for the fanout to all the DRAM input ports, such as clocks for UDIMMs. Driving of all these DRAM clocks can put quite a bit of load on the host output drivers, thus affecting the signal quality, which can result in unexpected memory errors. This issue gets amplified when operating at the higher clock and data rates where the clock signals transition from one logic value to the next over a very short time. To solve these signal integrity issues with DRAM clocks, JEDEC has come up with a new type of DDR5 DIMM component that is called DDR5 clock buffer. Clock buffers can be used for both DDR5 SO-DIMMs and DDR5 UDIMMs. DDR5 UDIMMs that include a clock buffer component as part of the DIMM card are called DDR5 CUDIMMs (Clock Buffered UDIMMs).

DDR5 Clock Buffer Overview

DDR5 Clock Buffer is a simple logic device that takes in two sets of input clock pins and drives two sets of clock pins as output per channel. The clock buffer device can operate in three types of clock modes: -

• PLL bypass mode: In this mode, the clock buffer just passes on the input clocks to output without any kind of signal buffering. The PLL bypass mode enabled CUDIMM devices behave like traditional UDIMMs without any buffering of the clocks. This is why it’s also referred to as legacy mode. Recommended CUDIMM operating speeds in PLL bypass mode are typically limited to 3000 MHz.

• Single PLL mode: In the single PLL Mode, the clock buffer device will use a Phase Lock Loop (PLL) for the regeneration of the incoming host clock to create a better-quality clock that is sent to the DRAMs. However, since there is only one PLL that is used in this mode, both sub channel output clocks will be driven based on only one set of input clocks with the other set of input clocks remaining unused.

• Dual PLL mode: In this mode, the clock buffer will use two PLLs to independently generate each sub channel output clock based on each set of incoming host clocks. The second set of PLL can be turned on or off on the fly if needed to save power.

Beyond the clock modes, clock buffers provide additional flexibility to the system designers with register-controlled additional signal delays, optional output clock enable/disable per bit feature, drive strength and termination choices, etc. All DDR5 clock buffer device control word registers are accessible via DDR5 DIMM sideband.

Cadence VIPs offers a compressive memory subsystem solution that includes memory models for DDR5 SDRAM, DDR5 RCD, DDR5 DB, DDR5 clock buffer, all types of DDR5 DIMMs, including the DDR5 CUDIMMs, DFI Memory Controller/PHY VIPs, and a system VIP compliant to JEDEC specifications defined for each of those devices along with latest DFI Specification.

More information on Cadence DDR5 DIMM VIP is available at the Cadence VIP Memory Models website.

The Sigrity and Systems Analysis (SIGRITY/SYSANLS) 2024.1 release is now available for download at Cadence Downloads . For the list of CCRs fixed in this release, see the README.txt file in the installation hierarchy. SIGRITY/SYSANLS 2024.1 Here is a list of some of the key updates in the SIGRITY/SYSANLS 2024.1 release: For more details about these and all the other new and enhanced features introduced in this release , refer to the following document: Sigrity Release Overview and Common Tools What's New . Supported Platforms and Operating Systems Platform and Architecture X86_64 (lnx86) Windows (64 bit) Development OS RHEL 8.4 Windows Server 2022 Supported OS RHEL 8.4 and above RHEL 9 SLES 15 (SP3 and above) Windows 10 Windows 11 Windows Server 2019 Windows Server 2022 Systems Analysis 2024.1 Clarity 3D Solver Clarity 3D Layout Structure Optimization Workflow : A new workflow, Clarity 3D Layout Structure Optimization Workflow, has been added to Clarity 3D Layout. This workflow integrates Allegro PCB Designer with Clarity 3D Layout for high-speed structure optimization. Component Geometry Model Editor : The new Clarity 3D Layout editor lets you set up ports, solder bumps/balls/extrusions, and two-terminal and multi-terminal circuits using a single GUI. Coaxial Open Port Option Added to Port Setup Wizard : The Coaxial Open Port option lets you create ports for each target net pin and reference net pin in Clarity 3D Layout. The nearby reference net pins are then used as a reference for each target net pin, reducing the number of ports needed. In addition, the ports of unused reference net pins are shorted to the ground. Parametric Import Option Added : Two new options, Parametric Import and Default Import , have been added to the Tools – Launch Clarity3DWorkbench menu. The Parametric Import option lets you import the design along with its parameters into Clarity 3D Workbench. The Default Import option lets you ignore the parameters when importing the design into Clarity 3D Workbench. Component Library Added to Generate 3D Components : Clarity 3D Workbench now includes a new component library that lets you use predefined 3D component templates or add existing 3D components to create 3D designs and simulation models. AI-Powered Content Search Capability : Clarity 3D Workbench and Clarity 3D Transient Solver now support an AI-powered capability for searching the content and displaying relevant information. Expression Parser to Handle Undefined Parameters : Clarity 3D Workbench and Clarity 3D Transient Solver support writing expressions or equations containing undefined parameters in the Property window to describe a simulation variable. The improved expression parser automatically detects any undefined parameter in an expression and prompts users to specify their values. This capability lets you define a model or a simulation variable as a function instead of specifying static values. For detailed information, refer to Clarity 3D Layout User Guide and Clarity 3D Workbench User Guide on the Cadence Support portal. Clarity 3D Transient Solver Mesh Processing Improved to Simulate Large Use Cases : Clarity 3D Transient Solver leverages a new meshing algorithm that enhances overall mesh processing, specifically for large designs and use cases. The new algorithm dramatically improves the mesh quality, minimum mesh size, number of mesh key points, total mesh number, and memory usage. Advanced Material Processing Engine : The material processing capability has been enhanced to handle thin outer metal, which previously resulted in open and short issues in some designs. In addition, the material processing engine offers improved mode extraction for particular use cases, including waveguide and coaxial designs. Characteristic Impedance Calculation Improved : The solver engine now uses a new analytical calculation method to calculate the characteristic impedance of coaxial designs with improved accuracy. For detailed information, refer to Clarity 3D Transient Solver User Guide on the Cadence Support portal. Celsius Studio Celsius Interchange Model Introduced : Celsius Studio now supports Celsius Interchange Model generation, which is a 3D model derived from detailed physical designs for multi-physics and multi-scale analysis. This Celsius Interchange Model file ( .cim ) serves as a design information carrier across Celsius Studio tools, enabling a variety of simulation and analysis tasks . Celsius 3DIC Thermal Workflow Improvements : The Thermal Simulation workflows in Celsius 3DIC have been significantly enhanced. Key improvements include: Advanced Power Setup with Transient Power Function and Multi Mode options Enhanced GUI for the Mesh Control and Simulation Control tabs Improved meshing capabilities Celsius Interchange Model ( .cim ) generation Material library support for block and connections Import of Heat Transfer Coefficients (HTCs) from a CFD file Bump creation through the Bump Array Wizard Layer Stackup CSV file generation Celsius 3DIC Warpage and Stress Workflow Enhancements : The Warpage and Stress workflow in Celsius 3DIC has undergone significant improvements, such as: Improved multi-stage warpage simulation flow for 3DIC packaging process Enhanced GUI for the Mesh Control , Simulation Control , and Stress Boundary Conditions tabs Support for large deformations and temperature profiles Bump creation through the Bump Array Wizard New constraint types Enhanced meshing capabilities Geometric Nonlinearity Support in Warpage and Stress Analysis : Large deformation analysis is now supported in warpage and stress studies. This study uses the Total Lagrangian approach to model geometric nonlinearities in simulation, which allows accurate prediction of final deformations. Thermal Network Extraction and Simulation : In the solid extraction flow in Celsius 3D Workbench, you can now import area-based power map files to create terminals. For designs with multiple blocks, this capability allows automatic terminal creation, eliminating the need to manually create and set up 2D sheets individually. Additionally, thermal throttling feature is now supported in Celsius Thermal Network. This makes it ideal for preliminary analyses or when a quick estimation is required. It runs significantly faster than 3D models, allowing for quicker iterations and more efficient decision-making. For detailed information, refer to the Celsius 3DIC User Guide , Celsius Layout User Guide and Celsius 3D Workbench User Guide on the Cadence Support portal. Sigrity 2024.1 Layout Workbench Improved Graphical User Interface : A new option, Use Improved User Interface , has been added in the Themes page of the Options dialog box in the Layout Workbench GUI. In the new GUI, the toolbar icons and menu options have been enhanced and rearranged. For detailed information, refer to Layout Workbench User Guide on the Cadence Support portal. Broadband SPICE Python Script Integration with Command Line for Simulation Tasks : Broadband SPICE lets you run Python scripts directly from the command line for performing simulation and analysis. The new -py and *.py options make it easier to integrate Python scripts with the command-line operations. This update streamlines the process of automating and customizing simulations from the command line, which makes your simulation tasks faster and easier. For detailed information, refer to Broadband SPICE User Guide on the Cadence Support portal. Celsius PowerDC Block Power Assignment (BPA) File Format Support : PowerDC now supports the BPA file format. Similar to the Pin Location (PLOC) file, the BPA file is a current assignment file that defines the total current of a power grid cell, which is then equally distributed across the power pins within the cell. This provides better control over the power distribution. Ability to Run Multiple IR Drop Cases Sequentially : You can now select multiple result sinks from the Current-Limited IR Drop flow and run IR Drop analysis for them sequentially. PowerDC automatically runs the simulations in sequence after you select multiple result sinks. This saves time by automating the process. Enhanced Support for Mixed Conversion Devices : PowerDC now supports mixing different conversion devices, such as switching regulators and linear regulators within a single DC-DC/LDO instance. This enhancement offers added flexibility by letting you configure each instance in your design according to your specific needs. For detailed information, refer to PowerDC User Guide on the Cadence Support portal. PowerSI Monte Carlo Method Added : A new option, Monte Carlo Method, has been added in the Optimality dialog box. This option lets you create multiple random samples to depict variations in the input parameters and assess the output. Channel Check Optimization Added : The S-Parameter Assessment workflow in PowerSI now supports Channel Check Optimization . It uses the AI-driven Multidisciplinary Analysis and Optimization (MDAO) technology that lets you optimize your design quickly and efficiently with no accuracy loss. For detailed information, refer to PowerSI User Guide on the Cadence Support portal. SPEEDEM Multi-threaded Matrix Solver Support Added : The Enable Multi-threaded Matrix Solver check box has been added that lets you accelerate the simulation speed for high-performance computing. This check box provides two options, Automatic and Always, to include the -lhpc4 or -lhpc5 parameter, respectively, in the SPEEDEM Simulator (SPDSIM) before running the simulation. For detailed information, refer to the SPEEDEM User Guide on the Cadence Support portal. XtractIM Options to Skip or Calculate Special DC-R Simulation Results : The Skip DC_R of Each Path and Only DC_R of Each Path options have been added to the Setup menu. Skip DC_R of Each Path : This option lets you skip the calculation of the DC-R result during the simulation. Other results, such as SPICE T-model , RL_C of Each Path , Coupling of Each Path , etc., are still calculated. Only DC_R of Each Path : This option lets you calculate the DC-R result only during the simulation. Other results, such as SPICE T-model , RL_C of Each Path , Coupling of Each Path , etc., are not calculated. Color Assignment for Pin Matching : The MCP Auto Connection window includes the Display Color Editor , which lets you assign a color for pin matching. It helps you easily identify the matching pins in the left and right sections of the MCP Auto Connection window . Ability to Save Simulations Individually : The Save each simulation individually check box has been added to the Tools - Options - Edit Options - Simulation (Basic) - General form. Select this check box and run the simulation to generate a simulation results folder containing files and logs with a timestamp for each simulation. Reuse of SPD File Settings : The XtractIM setup check box lets you import an existing package setup to reuse the configurations and settings from one .spd file to another. For detailed information, refer to XtractIM User Guide on the Cadence Support portal. Documentation Enhancements Cloud-Based Help System Upgraded The cloud-based help system, Doc Assistant, has been upgraded to version 24.10, which contains several new features and enhancements over the previous 2.03 version. Sigrity Release Team Please send your questions and feedback to sigrity_rmt@cadence.com .

This November, the engineering and simulation community is set to converge in China for an event that promises to be nothing short of revolutionary. The 2024 BETA CAE Systems China Open Meeting, taking place in the vibrant cities of Beijing and Shanghai on November 5 and 7 , respectively, is a must-attend for anyone looking to stay at the forefront of technological innovation in simulation solutions. Prepare to be inspired by Ben Gu , the visionary Corporate VP of Research and Development at Cadence. He will lead both meetings in Beijing and Shanghai with his keynote on " A New Millennium in Multiphysics System Analysis ." This thought-provoking keynote is expected to provide attendees with a glimpse into the future of engineering simulation and analysis. What sets the BETA CAE Systems Open Meetings apart is not just the high caliber of speakers but also the hands-on training sessions designed to enhance your technical expertise with the BETA CAE software suite. Whether you are an inexperienced individual seeking to acquire fundamental knowledge or an accomplished professional endeavoring to hone your expertise, these training sessions following the open meetings are meticulously tailored to meet your needs. Join Us at the BETA CAE Systems Open Meeting in Beijing The BETA CAE Systems Open Meeting in Beijing will feature a keynote speech by Peng Qiao , Senior Engineer at Great Wall Motors Co., Ltd, on Multidisciplinary Optimization Techniques for Automotive Control Arms . ( View detailed agenda for Beijing. ) When: November 5, 2024 Where: Grand Metropark Hotel Beijing If this sounds interesting, register today for the BETA CAE Systems Beijing Open Meeting by clicking the button below. Don't Miss Out on the BETA CAE Systems Open Meeting in Shanghai After the BETA CAE Systems Open Meeting in Beijing, the next meeting in China will be in Shanghai. During this event, Liu Deping, CAE Engineer from Zhejiang Geely Automobile Research Institute Co., Ltd, will deliver a keynote speech on the Application of ANSA in the Simulation Development Cycle . ( View detailed agenda for Shanghai. ) When: November 7, 2024 Where: InterContinental Shanghai Jing'an Following the open meeting on November 7 will be an exclusive training day on November 8. This session will provide attendees with practical experience using the BETA CAE software to improve their technical skills and provide hands-on knowledge of the software. If you find this intriguing, register now for the BETA CAE Systems Shanghai Open Meeting by clicking the button below. Why Attend? Gain firsthand insights into the latest developments in simulation technology Learn from real-world applications and success stories from various industries Connect and exchange ideas with experts in a collaborative environment Mark your calendars for this unparalleled opportunity to explore the forefront of simulation technology. Whether you're aiming to broaden your knowledge, enhance your technical skills, or connect with industry leaders, the BETA CAE Systems Open Meetings are your gateway to the future of engineering. Join us and be part of shaping the next wave of innovation in the simulation world.

Hello all,

I have run a simulation with a lot of instnaces extraction and the psf.trn is >= 200 Gb, I tried to load it with simvision and it just breaks.

I would like to ask if there is a way to open this file, e.g. if I could read only some time window e.g. from 10us -> 15us.

getVersion(t)
"sub-version  ICADVM20.1-64b.500.34 "

XCELIUMMAIN23.03.001

thank you in advance

I'm trying to use Jasper for checking parameter propagation in a large design. I have a list of top-level parameters, each with a HDL path of a module parameter somewhere lower in the hierarchy that's supposed to receive its value from the top-level module. The FPV app seems like an excellent tool for this, but elaborating the entire design in it is extremely time-consuming and memory-intensive. So, I'm trying to black-box everything but the interesting HDL paths. I thought using `elaborate -top dut_module_name -bbox_i * -no_bbox_i inst_foo -no_bbox_i inst_bar (...)` would work, but it doesn't. Jasper just starts flooding the log with warnings from modules that are definitely not on the whitebox list, and eventually dies due to insufficient memory. When I use -bbox_m * it correctly elaborates the top-level module with all of its sub-modules black-boxed. But then the -no_bbox_i switches have no effect. Could anyone suggest a working solution for this use case?

Hello,

I have a question I want to create a cover that consists a sparse values, pre-computed (a list or define) for example l = {1; 4; 7; 9; 2048; 700} I'd like to cover that data a (uint(bits:16)) had those values, Any suggestion on how to achieve this, I'd prefer to stay away from macros, and avoid to write a lot of code

struct inst {

  data :uint(bits:16);
  opcode :uint(bits:16);
  !valid_data : list of uint(bits:16) = {0; 12; 10; 700; 890; 293;};
  event data_e;
  event opcode_e;

  cover data_e is {
     item data using radix = HEX, ranges = {
     //I dont want to write all of this
     range([0], "My range1");
     range([10], "My range2");
     //... many values in between
    range([700], "My rangen");
    };

    item opcode;

   cross data, opcode;
};

post_generate() is also {
    emit data_e;
};
};

RF Design Solutions for Next-Generation Products The International Microwave Symposium (IMS2022), otherwise known as Microwave Week, was recently held (June 19-24) at the Denver Convention center, returning to its long-standing g...(read more)

The Sigrity and Systems Analysis (SIGRITY/SYSANLS) 2022.1 HF2 release is now available for download at Cadence Downloads. For the list of CCRs fixed in the 2022.1 HF2 release, see the README.txt file in the installation hierarchy.(read more)

Microwaves & RF's David Maliniak interviews Sherry Hess of Cadence about recently announced products of Optimality and OnCloud.(read more)

An AMS Designer Flex simulation gives you the most immediate access to the latest simulation technology on either side, gets out of the way of the core engines and allows the engine performance to shine while providing access to new features. Check out this blog to know more.

This blog introduces you to an efficient way to debug interface elements or connect modules in a mixed-signal simulation.(read more)