Customizing a single responsive 'Swiper' slideshow to have background thumbnails and large images, animated captions, pause autorun.

The project is a collaboration between DensityDesign Lab and ISI... more

In the information overload age, the user needs to find... more

Study objectives were to evaluate yearly fluctuations in herbage canopy cover and production to aid in defining characteristics of range condition guides. Sites are located in the forested Blue Mountains of central Oregon. They were selected from those used to develop range condition guides where soil, topographic, and vegetation parameters were measured as a characterization of best range condition. Plant community dominants were ponderosa pine/pinegrass, ponderosa pine/bitterbrush/Idaho fescue savanna, low sagebrush/bluebunch wheatgrass, and rigid sagebrush scabland. None of the sites were grazed during the previous 30 years or during the 27-year study. Each location was permanently marked by fence posts, and a meter board was placed 10 m down an established transect line. Photographs (color slides) were taken down the transect with closeups left and right of the meter board. Sampling was limited to August 1-4 each year when canopy cover and herbage production were determined. Both total canopy cover and herbage production varied by about a 2.4-fold difference on each site over the 27 years. Apparently "good range condition" may be something of a "running target" and lacks a well-defined set of parameters. Canopy cover is a poor parameter for characterizing range condition. Three of the four plant communities were dominated by bunchgrasses. Abundance of seedheads is commonly used to indicate good range health. But on these sites, seedheads were not produced about half the time. Because these sites were in "good range condition," lack of seedhead production may indicate maximum competition in the community. Maximum competition and maximum vigor do not seem to be synonymous. These bunchgrass communities varied in their greenness on the first of August each year from cured brown to rather vibrant green suggesting important annual differences in phenology. The pinegrass community, being dominated by rhizomatous species, showed surprising variance in seedhead production. Pinegrass did not flower, but Wheeler's bluegrass, lupine, and Scouler's woolyweed were quite variable, averaging inflorescences only 75 percent of the time.

CONCORE ENTERTAINMENT star NATALIA DAMINI will perform her new hit PACEMAKER (f/ PETEY PABLO) on an IG LIVE TOMORROW with iHEARTMEDIA Top 40 WAKS (96.5 KISS FM)/CLEVELAND at 2p (ET) for the … more

WASHINGTON, D. C., 3 de abril del 2020— Hoy, más de 200 organizaciones de protección de pacientes, médicas y de salud pública enviaron una carta a altos funcionarios de la administración de Donald Trump, en la cual se apela a la Administración para que...

Circulation Journal Report AHA COVID-19 Newsroom   FOR IMMEDIATE RELEASE: 4 a.m. CT/5 a.m. ET, Saturday, May 2, 2020   DALLAS, May 2, 2020 — American Heart Association volunteer experts issued Temporary Emergency Guidance to STEMI Systems of Care...

An intimate account of one young girl’s harrowing experience and miraculous survival.

The following is a guest post by Austin Gunter of WPEngine.com. If you’re looking to boost performance for a content-heavy WordPress installation, adding a cache like Varnish is a great way to boost your site’s performance. NB - This is an advanced topic, and only relevant if you have full control over your server (e.g. you're on a VPS). It does not apply to regular webhosting.

A small increase in customer retention can mean huge gains for your online store. Automate post-purchase emails to improve customer loyalty (and profits)!

The post 7 Ways to Engage Customers with Post-Purchase Email Automation appeared first on WooCommerce.

During COVID-19, you might be tempted to stay silent. But your customers need to hear from you! Learn how to craft the right message with the right tone.

The post Why Customer Communication is Crucial in Times of Uncertainty appeared first on WooCommerce.

Recent advances in technology have helped both small and large companies to automate their business process to improve productivity. In fact, experts have also emphasized that productivity has stalled over the last couple of years. Numerous large-scale businesses also complained that their productivity was in decline despite implementing innovative workplace guidelines to improve the workflow. […] More

Web clients love custom designs. Enough unique changes can turn a pre-made template into a beautiful, original site design. While there’s nothing wrong with tweaking a website for your clients, customization can be taken too far.   Granting excessive requests can put your projects into overtime and drive you mad. If you want to avoid […] More

Here is a neat trick. Say you want to show a custom field in you post or in a certain categories post. There is a simple code you need to write in order to accomplish this: <?php $image = get_post_meta($post->ID, "image", $single = true); ?> <?php if($image != '') : if(in_category(7)) { echo ''; } […]

The post Echo custom fields in any category appeared first on WPCult.

I am not sure if this is from a pluigin error. But I suddenly have custom field names “atfemail_” and random letters and digits @ random numbers and digits dot com. hmm.. Any idea’s? I think it may be from the subscribe to comments plugin.

The post Wierd custom fields appeared first on WPCult.

Here is a nifty trick for your comments.php template. If someone comes to your site and leaves a comment but doesn’t leave a url back to there site, the default link that is shown in place of the php code comment_author_url is the current page link. That might not look good. So, here is a […]

The post Display custom url if comment authors url is blank appeared first on WPCult.

Today let’s learn a simple quick trick on how to create a custom widget. For my example I will show you how I created my Showcase widget located in the middle, to the right of the posts. First under your functions.php file type in the following: <?php // Custom Widget function MyCustomWidget() { ?> <li […]

The post Creating a custom widget appeared first on WPCult.

In the last post “Creating a custom widget” I showed you how to create a custom widget. Well in this post I will show you how I used my custom widget to display all post with a certain custom field from outside the WordPress loop. In the last post I used this tag: <?php include(TEMPLATEPATH […]

The post Pulling custom fields from outside the loop appeared first on WPCult.

Most all WordPress theme’s use a a simple search form to search your site. But what it you wanted to search your whole site and not just your posts. Search Unleashed comes into the picture. Search Unleashed performs searches across all data, including that added by plugins. Some features of this plugin are: Full text […]

The post Search Unleased: A custom WordPress plugin appeared first on WPCult.

BIG NEWS: My custom Lightroom presets are now available and 50% off for a limited time with discount code HOLIDAY50. Link in profile!

This collection includes two styles (Everyday and Clean) that I use to edit every shot on this feed. I can’t wait to see what you all do with them! Stay tuned to my upcoming tutorials on how to put the presets to good use. ???? (at Toronto, Ontario)

In late August, we launched the private beta program of our advanced audio algorithm parameters. After feedback by our users and many new experiments, we are proud to release a complete rework of the Adaptive Leveler parameters:

In the previous version, we based our Adaptive Leveler parameters on the Loudness Range descriptor (LRA), which is included in the EBU R128 specification.
Although it worked, it turned out that it is very difficult to set a loudness range target for diverse audio content, which does include speech, background sounds, music parts, etc. The results were not predictable and it was hard to find good target values.
Therefore we developed our own algorithm to measure the dynamic range of audio signals, which works similarly for speech, music and other audio content.

The following advanced parameters for our Adaptive Leveler allow you to customize which parts of the audio should be leveled (foreground, all, speech, music, etc.), how much they should be leveled (dynamic range), and how much micro-dynamics compression should be applied.

To try out the new algorithms, please join our private beta program and let us know your feedback!

Leveler Preset

The Leveler Preset defines which parts of the audio should be adjusted by our Adaptive Leveler:

• Default Leveler:
  Our classic, default leveling algorithm as demonstrated in the Leveler Audio Examples. Use it if you are unsure.
• Foreground Only Leveler:
  This preset reacts slower and levels foreground parts only. Use it if you have background speech or background music, which should not be amplified.
• Fast Leveler:
  A preset which reacts much faster. It is built for recordings with fast and extreme loudness differences, for example, to amplify very quiet questions from the audience in a lecture recording, to balance fast-changing soft and loud voices within one audio track, etc.
• Amplify Everything:
  Amplify as much as possible. Similar to the Fast Leveler, but also amplifies non-speech background sounds like noise.

Leveler Dynamic Range

Our default Leveler tries to normalize all speakers to a similar loudness so that a consumer in a car or subway doesn't feel the need to reach for the volume control.
However, in other environments (living room, cinema, etc.) or in dynamic recordings, you might want more level differences (Dynamic Range, Loudness Range / LRA) between speakers and within music segments.

The parameter Dynamic Range controls how much leveling is applied: Higher values result in more dynamic output audio files (less leveling). If you want to increase the dynamic range by 3dB (or LU), just increase the Dynamic Range parameter by 3dB.
We also like to call this Loudness Comfort Zone: above a maximum and below a minimum possible level (the comfort zone), no leveling is applied. So if your input file already has a small dynamic range (is within the comfort zone), our leveler will be just bypassed.

Example Use Cases:
Higher dynamic range values should be used if you want to keep more loudness differences in dynamic narration or dynamic music recordings (live concert/classical).
It is also possible to utilize this parameter to generate automatic mixdowns with different loudness range (LRA) values for different target environments (very compressed ones like mobile devices or Alexa, very dynamic ones like home cinema, etc.).

Compressor

Controls Micro-Dynamics Compression:
The compressor reduces the volume of short and loud spikes like "p", "t" or laughter ( short-term dynamics) and also shapes the sound of your voice (it will sound more or less "processed").
The Leveler, on the other hand, adjusts mid-term level differences, as done by a sound engineer, using the faders of an audio mixer, so that a listener doesn't have to adjust the playback volume all the time.
For more details please see Loudness Normalization and Compression of Podcasts and Speech Audio.

• Auto:
  The compressor setting depends on the selected Leveler Preset. Medium compression is used in Foreground Only and Default Leveler presets, Hard compression in our Fast Leveler and Amplify Everything presets.
• Soft:
  Uses less compression.
• Medium:
  Our default setting.
• Hard:
  More compression, especially tries to compress short and extreme level overshoots. Use this preset if you want your voice to sound very processed, our if you have extreme and fast-changing level differences.
• Off:
  No short-term dynamics compression is used at all, only mid-term leveling. Switch off the compressor if you just want to adjust the loudness range without any additional micro-dynamics compression.

Separate Music/Speech Parameters

Use the switch Separate MusicSpeech Parameters (top right), to see separate Adaptive Leveler parameters for music and speech segments, to control all leveling details separately for speech and music parts:

For dialog intelligibility improvements in films and TV, it is important that the speech/dialog level and loudness range is not too soft compared to the overall programme level and loudness range. This parameter allows you to use more leveling in speech parts while keeping music and FX elements less processed.
Note: Speech, music and overall loudness and loudness range of your production are also displayed in our Audio Processing Statistics!

Example Use Case:
Music live recordings or dynamic music mixes, where you want to amplify all speakers (speech dynamic range should be small) but keep the dynamic range within and between music segments (music dynamic range should be high).
Dialog intelligibility improvements for films and TV, without effecting music and FX elements.

Other Advanced Audio Algorithm Parameters

We also offer advanced audio parameters for our Noise, Hum Reduction and Global Loudness Normalization algorithms:

For more details, please see the Advanced Audio Algorithms Documentation.

Want to know more?

If you want to know more details about our advanced algorithm parameters (especially the leveler parameters), please listen to the following podcast interview with Chris Curran (Podcast Engineering School):
Auphonic’s New Advanced Features, with Georg Holzmann – PES 108

Advanced Parameters Private Beta and Feedback

At the moment the advanced algorithm parameters are for beta users only. This is to allow us to get user feedback, so we can change the parameters to suit user needs.
Please let us know your case studies, if you need any other algorithm parameters or if you have any questions!

Here are some private beta invitation codes:

jbwCVpLYrl 6zmLqq8o3z RXYIUbC6al QDmIZLuPKa JIrnGRZBgl SWQOWeZOBD ISeBCA9gTy w5FdsyhZVI qWAvANQ5mC twOjdHrit3
KwnL2Le6jB 63SE2V54KK G32AULFyaM 3H0CLYAwLU mp1GFNVZHr swzvEBRCVa rLcNJHUNZT CGGbL0O4q1 5o5dUjruJ9 hAggWBpGvj
ykJ57cFQSe 0OHAD2u1Dx RG4wSYTLbf UcsSYI78Md Xedr3NPCgK mI8gd7eDvO 0Au4gpUDJB mYLkvKYz1C ukrKoW5hoy S34sraR0BU
J2tlV0yNwX QwNdnStYD3 Zho9oZR2e9 jHdjgUq420 51zLbV09p4 c0cth0abCf 3iVBKHVKXU BK4kTbDQzt uTBEkMnSPv tg6cJtsMrZ
BdB8gFyhRg wBsLHg90GG EYwxVUZJGp HLQ72b65uH NNd415ktFS JIm2eTkxMX EV2C5RAUXI a3iwbxWjKj X1AT7DCD7V y0AFIrWo5l

If you have an invitation code, you can enter it here to activate the advanced audio algorithm parameters:
Auphonic Algorithm Parameters Private Beta Activation

We’re delighted to launch the first ever website for this local irrigation company that has been around since 1989! Automated...continue reading

Access management can be a bit of a nightmare, especially when we realize that we rely on a number of different, independent services that power our organizations. Many businesses use Gmail for email, Google Docs for documents, Slack for communication, GitHub for their codebase, etc. Yet each of these services provides their own permissions screens, […]

The post Teamstack: Easy Automation of Identity Management (Sponsored) appeared first on David Walsh Blog.

Chris Coyier of CSS-Tricks is an amazing engineer and blogger. He’s not only creative but has always had the drive to put his thoughts to work, no matter how large. He also has a good eye for the little things that can make CSS-Tricks or your site special. One of those little things is his […]

The post How to Create a CSS-Tricks Custom Scrollbar appeared first on David Walsh Blog.

In this Chalkboard Text Vector tutorial, I’ll show you how to create a chalkboard vector effect with some gradients, a bristle brush, and some freebies from Vector Mill! This chalkboard text vector effect tutorial is relatively simple and can be applied to many other Illustrator projects. Use this effect for logo creation, back to school backgrounds, […]

The post 20 Minute Tut! Create Your Own Customized Chalkboard Text Vector appeared first on Vectips.

Creative interactions call for creative measures - numerous extensions reduce, minimize or dilute the frustration of the customers and resolve issues quickly without the customer support team need....

Customer service as we know it has changed. Today’s customers won’t necessarily call a contact center when they need help. […]

The post Best WordPress Live Chat Plugins for Better Customer Support appeared first on WPHacks.

We kicked things off with an update on Rob's marijuana abstaining, or lack thereof. We then spend a good amount...

The post METAL INJECTION LIVECAST #540 - Eight Iota Ripper with Kenny Hickey of SILVERTOMB / TYPE O NEGATIVE appeared first on Metal Injection.

On this week's episode, we were joined by Stray From the Path guitarist Tom Williams. We talk about band's recently...

The post METAL INJECTION LIVECAST #541 - Thank You For Your Cervix with STRAY FROM THE PATH's Tom Williams appeared first on Metal Injection.

Everyday consumer products continue to frustrate people. The failure of companies to fully embrace UX is partly to blame, but there is also another reason -- one that is seldom discussed. Consumer product companies pay too much heed to their retail customers and, in so doing, they prevent the development team from getting first-hand knowledge of end users.

If you compare the UX research methods we use today with the methods we used 16 years ago, something interesting emerges. We see that UX research is becoming increasingly remote and increasingly unmoderated. In other words, we're moving to a world where UX research is becoming automated. We can learn a lot from automated research. But it comes at the price of understanding our users.

To prevent spammers from flooding old articles with useless comments you can set WordPress to close comments after a certain […]

If a new user registers at a WordPress site the new user and the administrator receive notification mails: User: From: […]

Let $1 le r < n$ be integers. We give a proof that the group $mathop{mathrm{Aut}}({X_{n}^{mathbb{N}}, sigma_{n}})$ of automorphisms of the one-sided shift on $n$ letters embeds naturally as a subgroup $mathcal{h}_{n}$ of the outer automorphism group $mathop{mathrm{Out}}(G_{n,r})$ of the Higman-Thompson group $G_{n,r}$. From this, we can represent the elements of $mathop{mathrm{Aut}}({X_{n}^{mathbb{N}}, sigma_{n}})$ by finite state non-initial transducers admitting a very strong synchronizing condition.

Let $H in mathcal{H}_{n}$ and write $|H|$ for the number of states of the minimal transducer representing $H$. We show that $H$ can be written as a product of at most $|H|$ torsion elements. This result strengthens a similar result of Boyle, Franks and Kitchens, where the decomposition involves more complex torsion elements and also does not support practical extit{a priori} estimates of the length of the resulting product.

We also give new proofs of some known results about $mathop{mathrm{Aut}}({X_{n}^{mathbb{N}}, sigma_{n}})$.

In this paper we first review the setting for the geometric Langlands functoriality and establish a result for the `backward' functoriality functor. We illustrate this by known examples of the geometric theta-lifting. We then apply the above result to obtain new Hecke eigen-sheaves. The most important application is a construction of the automorphic sheaf for G=GSp_4 attached to a G^L-local system on a curve X such that its standard representation is an irreducible local system of rank 4 on X.

Let $hat G$ be the finite simply connected version of an exceptional Chevalley group, and let $V$ be a nontrivial irreducible module, of minimal dimension, for $hat G$ over its field of definition. We explore the overgroup structure of $hat G$ in $mathrm{GL}(V)$, and the submodule structure of the exterior square (and sometimes the third Lie power) of $V$. When $hat G$ is defined over a field of odd prime order $p$, this allows us to construct the smallest (with respect to certain properties) $p$-groups $P$ such that the group induced by $mathrm{Aut}(P)$ on $P/Phi(P)$ is either $hat G$ or its normaliser in $mathrm{GL}(V)$.

Computer science class enrollments have rapidly risen in the past decade. With current class sizes, standard approaches to grading and providing personalized feedback are no longer possible and new techniques become both feasible and necessary. In this paper, we present the third version of Automata Tutor, a tool for helping teachers and students in large courses on automata and formal languages. The second version of Automata Tutor supported automatic grading and feedback for finite-automata constructions and has already been used by thousands of users in dozens of countries. This new version of Automata Tutor supports automated grading and feedback generation for a greatly extended variety of new problems, including problems that ask students to create regular expressions, context-free grammars, pushdown automata and Turing machines corresponding to a given description, and problems about converting between equivalent models - e.g., from regular expressions to nondeterministic finite automata. Moreover, for several problems, this new version also enables teachers and students to automatically generate new problem instances. We also present the results of a survey run on a class of 950 students, which shows very positive results about the usability and usefulness of the tool.

How to generate testing scenario libraries for connected and automated vehicles (CAVs) is a major challenge faced by the industry. In previous studies, to evaluate maneuver challenge of a scenario, surrogate models (SMs) are often used without explicit knowledge of the CAV under test. However, performance dissimilarities between the SM and the CAV under test usually exist, and it can lead to the generation of suboptimal scenario libraries. In this paper, an adaptive testing scenario library generation (ATSLG) method is proposed to solve this problem. A customized testing scenario library for a specific CAV model is generated through an adaptive process. To compensate the performance dissimilarities and leverage each test of the CAV, Bayesian optimization techniques are applied with classification-based Gaussian Process Regression and a new-designed acquisition function. Comparing with a pre-determined library, a CAV can be tested and evaluated in a more efficient manner with the customized library. To validate the proposed method, a cut-in case study was performed and the results demonstrate that the proposed method can further accelerate the evaluation process by a few orders of magnitude.

Our starting point are register automata for data words, in the style of Kaminski and Francez. We study the effects of the single-use restriction, which says that a register is emptied immediately after being used. We show that under the single-use restriction, the theory of automata for data words becomes much more robust. The main results are: (a) five different machine models are equivalent as language acceptors, including one-way and two-way single-use register automata; (b) one can recover some of the algebraic theory of languages over finite alphabets, including a version of the Krohn-Rhodes Theorem; (c) there is also a robust theory of transducers, with four equivalent models, including two-way single use transducers and a variant of streaming string transducers for data words. These results are in contrast with automata for data words without the single-use restriction, where essentially all models are pairwise non-equivalent.

With the rapidly worldwide spread of Coronavirus disease (COVID-19), it is of great importance to conduct early diagnosis of COVID-19 and predict the time that patients might convert to the severe stage, for designing effective treatment plan and reducing the clinicians' workloads. In this study, we propose a joint classification and regression method to determine whether the patient would develop severe symptoms in the later time, and if yes, predict the possible conversion time that the patient would spend to convert to the severe stage. To do this, the proposed method takes into account 1) the weight for each sample to reduce the outliers' influence and explore the problem of imbalance classification, and 2) the weight for each feature via a sparsity regularization term to remove the redundant features of high-dimensional data and learn the shared information across the classification task and the regression task. To our knowledge, this study is the first work to predict the disease progression and the conversion time, which could help clinicians to deal with the potential severe cases in time or even save the patients' lives. Experimental analysis was conducted on a real data set from two hospitals with 422 chest computed tomography (CT) scans, where 52 cases were converted to severe on average 5.64 days and 34 cases were severe at admission. Results show that our method achieves the best classification (e.g., 85.91% of accuracy) and regression (e.g., 0.462 of the correlation coefficient) performance, compared to all comparison methods. Moreover, our proposed method yields 76.97% of accuracy for predicting the severe cases, 0.524 of the correlation coefficient, and 0.55 days difference for the converted time.

We present a LiDAR-based and real-time capable 3D perception system for automated driving in urban domains. The hierarchical system design is able to model stationary and movable parts of the environment simultaneously and under real-time conditions. Our approach extends the state of the art by innovative in-detail enhancements for perceiving road users and drivable corridors even in case of non-flat ground surfaces and overhanging or protruding elements. We describe a runtime-efficient pointcloud processing pipeline, consisting of adaptive ground surface estimation, 3D clustering and motion classification stages. Based on the pipeline's output, the stationary environment is represented in a multi-feature mapping and fusion approach. Movable elements are represented in an object tracking system capable of using multiple reference points to account for viewpoint changes. We further enhance the tracking system by explicit consideration of occlusion and ambiguity cases. Our system is evaluated using a subset of the TUBS Road User Dataset. We enhance common performance metrics by considering application-driven aspects of real-world traffic scenarios. The perception system shows impressive results and is able to cope with the addressed scenarios while still preserving real-time capability.

Moving a module in a modular robot is a very complex and error-prone process. Unlike in swarm, in the modular robots we are targeting, the moving module must keep the connection to, at least, one other module. In order to miniaturize each module to few millimeters, we have proposed a design which is using electrostatic actuator. However, this movement is composed of several attachment, detachment creating the movement and each small step can fail causing a module to break the connection. The idea developed in this paper consists in creating a new kind of deformable module allowing a movement which keeps the connection between the moving and the fixed modules. We detail the geometry and the practical constraints during the conception of this new module. We then validate the possibility of movement for a module in an existing configuration. This implies the cooperation of some of the modules placed along the path and we show in simulation that it exists a motion process to reach every free positions of the surface for a given configuration.

Web services often impose inter-parameter dependencies that restrict the way in which two or more input parameters can be combined to form valid calls to the service. Unfortunately, current specification languages for web services like the OpenAPI Specification (OAS) provide no support for the formal description of such dependencies, which makes it hardly possible to automatically discover and interact with services without human intervention. In this article, we present an approach for the specification and automated analysis of inter-parameter dependencies in web APIs. We first present a domain-specific language, called Inter-parameter Dependency Language (IDL), for the specification of dependencies among input parameters in web services. Then, we propose a mapping to translate an IDL document into a constraint satisfaction problem (CSP), enabling the automated analysis of IDL specifications using standard CSP-based reasoning operations. Specifically, we present a catalogue of nine analysis operations on IDL documents allowing to compute, for example, whether a given request satisfies all the dependencies of the service. Finally, we present a tool suite including an editor, a parser, an OAS extension, a constraint programming-aided library, and a test suite supporting IDL specifications and their analyses. Together, these contributions pave the way for a new range of specification-driven applications in areas such as code generation and testing.

Software development has been changing rapidly. This development process can be influenced through changing developer friendly approaches. We can save time consumption and accelerate the development process if we can automatically guide programmer during software development. There are some approaches that recommended relevant code snippets and APIitems to the developer. Some approaches apply general code, searching techniques and some approaches use an online based repository mining strategies. But it gets quite difficult to help programmers when they need particular type conversion problems. More specifically when they want to adapt existing interfaces according to their expectation. One of the familiar triumph to guide developers in such situation is adapting collections and arrays through automated adaptation of object ensembles. But how does it help to a novice developer in real time software development that is not explicitly specified? In this paper, we have developed a system that works as a plugin-tool integrated with a particular Data Mining Integrated environment (DMIE) to recommend relevant interface while they seek for a type conversion situation. We have a mined repository of respective adapter classes and related APIs from where developer, search their query and get their result using the relevant transformer classes. The system that recommends developers titled automated objective ensembles (AOE plugin).From the investigation as we have ever made, we can see that our approach much better than some of the existing approaches.

Convolutional neural networks (CNN) have shown promising results for end-to-end speech recognition, albeit still behind other state-of-the-art methods in performance. In this paper, we study how to bridge this gap and go beyond with a novel CNN-RNN-transducer architecture, which we call ContextNet. ContextNet features a fully convolutional encoder that incorporates global context information into convolution layers by adding squeeze-and-excitation modules. In addition, we propose a simple scaling method that scales the widths of ContextNet that achieves good trade-off between computation and accuracy. We demonstrate that on the widely used LibriSpeech benchmark, ContextNet achieves a word error rate (WER) of 2.1\%/4.6\% without external language model (LM), 1.9\%/4.1\% with LM and 2.9\%/7.0\% with only 10M parameters on the clean/noisy LibriSpeech test sets. This compares to the previous best published system of 2.0\%/4.6\% with LM and 3.9\%/11.3\% with 20M parameters. The superiority of the proposed ContextNet model is also verified on a much larger internal dataset.

Smart meters enable remote and automatic electricity, water and gas consumption reading and are being widely deployed in developed countries. Nonetheless, there is still a huge number of non-smart meters in operation. Image-based Automatic Meter Reading (AMR) focuses on dealing with this type of meter readings. We estimate that the Energy Company of Paran'a (Copel), in Brazil, performs more than 850,000 readings of dial meters per month. Those meters are the focus of this work. Our main contributions are: (i) a public real-world dial meter dataset (shared upon request) called UFPR-ADMR; (ii) a deep learning-based recognition baseline on the proposed dataset; and (iii) a detailed error analysis of the main issues present in AMR for dial meters. To the best of our knowledge, this is the first work to introduce deep learning approaches to multi-dial meter reading, and perform experiments on unconstrained images. We achieved a 100.0% F1-score on the dial detection stage with both Faster R-CNN and YOLO, while the recognition rates reached 93.6% for dials and 75.25% for meters using Faster R-CNN (ResNext-101).

Different state-of-the-art methods of the detection of schizophrenia symptoms based on the estimation of text coherence have been analyzed. The analysis of a text at the level of phrases has been suggested. The method based on the graph of the consistency of phrases has been proposed to evaluate the semantic coherence and the cohesion of a text. The semantic coherence, cohesion, and other linguistic features (lexical diversity, lexical density) have been taken into account to form feature vectors for the training of a model-classifier. The training of the classifier has been performed on the set of English-language interviews. According to the retrieved results, the impact of each feature on the output of the model has been analyzed. The results obtained can indicate that the proposed method based on the graph of the consistency of phrases may be used in the different tasks of the detection of mental illness.

Need some inspiration to build a high converting website? Websites that convert persuade visitors to become customers. These websites drive more revenue, so if you want to increase your site’s revenue, use these examples of websites that convert as inspiration! We’ll go over what makes for the best converting websites and five examples of websites […]

The post 5 Magnificent Examples of Websites That Convert Visitors into Customers appeared first on WebFX Blog.