As per the reports, the companies with a presence in China are back in business with easing of restrictions, while India extended its lockdown further till 3rd May.  How Are Things In China? The trade association Nasscom has said member companies across the sector are operating with almost 80% attendance. Basically, the lockdown in China […]

The post Indian IT Firms Doing Chinese Operations Is Working With 80% Capacity! Chinese Economy Back On Track? first appeared on Trak.in . Trak.in Mobile Apps: Android | iOS.

The Covid-19 pandemic has not only affected the tech sector but also has given a massive blow to the world economy, resulting in massive layoffs and unemployment. Many companies in the US have started downsizing, due to the economic fallout of the coronavirus pandemic. Indians with H-1B Visas Getting Laid off Priya K, a techie […]

The post 65,000 Indians With H1B Visa Staring At Unemployment, Deportation, Uncertainty Over Visa Rules first appeared on Trak.in . Trak.in Mobile Apps: Android | iOS.

New 90-day limits on work visas for Chinese journalists followed Beijing’s expulsion of American journalists and raised the threat of further retaliation by the Chinese government.

Angela Ruch has a full-time ride in the NASCAR Truck Series, a growing family and a docuseries on Facebook. Now, she'd love to get back to racing and get a win.

Even before baseball got shut down, Joe Maddon felt like people should talk more. So that's what he's doing, one Zoom at a time.

Alabama landed ESPN 300 wide receiver Jacorey Brooks, the Tide's fourth commit in the 2021 class.

New Athletic Director Todd Davis met with 25 players from last year's team on Thursday to discuss the institution's recent decision on football.  Haskell Indian Nations University suspended the program on June 12 and some questions still lingered about the future of football at the institution.  "I just felt like the players needed to hear from the Athletic Department," said Davis.  "Anybody that represents Haskell in intercollegiate athletics has my attention and respect."

Haskell Cross Country season opener starts at Riim Rock Farm.  

NCAA president Mark Emmert said he does not envision schools being ready to begin competing in college football or other fall sports unless students return to campuses around the country.

With the end of this virus-disrupted school year drawing nearer, a predictably bleak financial outlook for major college sports has emerged from the budgeting process.

The Panthers announced Tuesday that Russian forward Grigori Denisenko, the 15th overall pick in the 2018 draft, has agreed to a three-year entry-level contract.

It's more than tossing bags at a cookout. KC Joyner looks at the deeper levels of strategy and skill.

The Bucs have never had more than four prime-time games in a year, but in 2020 they'll face the Bears, Raiders, Giants, Saints and Rams in prime time.

The most important part of the men's golf season is traditionally held in the spring when post-season competition can lead to a national championship.  Before the team entered the spring, Head Golf Coach Gary Tanner recognized four players for their past performance at a recent home volleyball match.

This is the 15th installment of The Rationalist, my column for the Times of India.

It’s election season, and promises are raining down on voters like rose petals on naïve newlyweds. Earlier this week, the Congress party announced a minimum income guarantee for the poor. This Friday, the Modi government released a budget full of sops. As the days go by, the promises will get bolder, and you might feel important that so much attention is being given to you. Well, the joke is on you.

Every election, HL Mencken once said, is “an advance auction sale of stolen goods.” A bunch of competing mafias fight to rule over you for the next five years. You decide who wins, on the basis of who can bribe you better with your own money. This is an absurd situation, which I tried to express in a limerick I wrote for this page a couple of years ago:

POLITICS: A neta who loves currency notes/ Told me what his line of work denotes./ ‘It is kind of funny./ We steal people’s money/And use some of it to buy their votes.’

We’re the dupes here, and we pay far more to keep this circus going than this circus costs. It would be okay if the parties, once they came to power, provided good governance. But voters have given up on that, and now only want patronage and handouts. That leads to one of the biggest problems in Indian politics: We are stuck in an equilibrium where all good politics is bad economics, and vice versa.

For example, the minimum guarantee for the poor is good politics, because the optics are great. It’s basically Garibi Hatao: that slogan made Indira Gandhi a political juggernaut in the 1970s, at the same time that she unleashed a series of economic policies that kept millions of people in garibi for decades longer than they should have been.

This time, the Congress has released no details, and keeping it vague makes sense because I find it hard to see how it can make economic sense. Depending on how they define ‘poor’, how much income they offer and what the cost is, the plan will either be ineffective or unworkable.

The Modi government’s interim budget announced a handout for poor farmers that seemed rather pointless. Given our agricultural distress, offering a poor farmer 500 bucks a month seems almost like mockery.

Such condescending handouts solve nothing. The poor want jobs and opportunities. Those come with growth, which requires structural reforms. Structural reforms don’t sound sexy as election promises. Handouts do.

A classic example is farm loan waivers. We have reached a stage in our politics where every party has to promise them to assuage farmers, who are a strong vote bank everywhere. You can’t blame farmers for wanting them – they are a necessary anaesthetic. But no government has yet made a serious attempt at tackling the root causes of our agricultural crisis.

Why is it that Good Politics in India is always Bad Economics? Let me put forth some possible reasons. One, voters tend to think in zero-sum ways, as if the pie is fixed, and the only way to bring people out of poverty is to redistribute. The truth is that trade is a positive-sum game, and nations can only be lifted out of poverty when the whole pie grows. But this is unintuitive.

Two, Indian politics revolves around identity and patronage. The spoils of power are limited – that is indeed a zero-sum game – so you’re likely to vote for whoever can look after the interests of your in-group rather than care about the economy as a whole.

Three, voters tend to stay uninformed for good reasons, because of what Public Choice economists call Rational Ignorance. A single vote is unlikely to make a difference in an election, so why put in the effort to understand the nuances of economics and governance? Just ask, what is in it for me, and go with whatever seems to be the best answer.

Four, Politicians have a short-term horizon, geared towards winning the next election. A good policy that may take years to play out is unattractive. A policy that will win them votes in the short term is preferable.

Sadly, no Indian party has shown a willingness to aim for the long term. The Congress has produced new Gandhis, but not new ideas. And while the BJP did make some solid promises in 2014, they did not walk that talk, and have proved to be, as Arun Shourie once called them, UPA + Cow. Even the Congress is adopting the cow, in fact, so maybe the BJP will add Temple to that mix?

Benjamin Franklin once said, “Democracy is two wolves and a lamb voting on what to have for lunch.” This election season, my friends, the people of India are on the menu. You have been deveined and deboned, marinated with rhetoric, seasoned with narrative – now enter the oven and vote.

© 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic

Hello, my name is Hsukang. I want to use Liberate to create a .lib file for the following circuit. This is a scan FF with two separate outputs.   The question is that no matter how I described its function, the synthesis tool said its a manformed scan FF.  Has anyone ever encountered anything like this？How should I describe the function correctly？I found that almost standard flip-flop cells are with only one output Q or have Qn at the same time. Does Liberate support scan flip-flop cells with two separate outputs ？

Thanks.

Hi,

There was tool available with INCISIV called imc to view the coverage reports.

The question is: How can we view the code coverage reports generated with XCELIUM? I think imc is not available with XCELIUM?

Thanks in advance.

Hello,

I have created an appForm with  the following attachmentList and size:

?attachmentList list(hicLeftPositionSet | hicRightPositionSet ; field 1
                     hicLeftPositionSet | hicRightPositionSet ; field 2
etc.

?initialSize    800:800
?minSize        800:800
?maxSize       1600:800

If I reduce the minimum y-size (?minSize        800:200), scrollbars are not inserted, unless I remove the attachmentList constraints.

Is it possible to have both scrollbars and "hicLeftPositionSet | hicRightPositionSet"? 

Thank you,

Best regards,

Aldo

I want to select a constraint, and then run a SKILL command that returns a list with the members of that constraint. Is this possible?

Thx,

The Cadence® Connections® Verification Program brings together a worldwide network of services, training, and IP development experts that support Cadence verification solutions. The program members help customer accelerate the adoption of new...(read more)

Hi all,

I have a question regarding the manufacture : how to check a cluster of same net vias spacing, with have no shape or cline covered

In this week’s Whiteboard Wednesdays video, Dave Apte discusses how to create the lowest power design possible by using architectural exploration and Cadence’s Stratus HLS solution....

[[ Click on the title to access the full blog on the Cadence Community site. ]]

In the former blog about Python and Specman: Specman: Python Is here!, we described the technical information around Specman-Python integration. Since Python provides so many easy to use existing libraries in various fields, it is very tempting to leverage these cool Python apps.

Coverage has always been the center of the verification methodology, however in the last few years it gets even more focus as people develop advanced utilities, usually using Machine Learning aids. Anyhow, any attempt to leverage your coverage usually starts with some analysis of the behavior and trends of some typical tests. Visualizing the data makes it easier to understand, analyze, and communicate. Fortunately, Python has many Visualization libraries.

In this blog, we show an example of how you can use the plotting Python library (matplotlib) to easily display coverage information during a run. In this blog, we use the Specman Coverage API to extract coverage data, and a Python module to display coverage grades interactively during a single run and the way to connect both.

Before we look at the example, if you have read the former blog about Specman and Python and were concerned about the fact that python3 is not supported, we are glad to update that in Specman 19.09, Python3 is now supported (in addition to Python2).

The Testcase
Let’s say I have a stable verification environment and I want to make it more efficient. For example: I want to check whether I can make the tests shorter while hardly harming the coverage. I am not sure exactly how to attack this task, so a good place to start is to visually analyze the behavior of the coverage on some typical test I chose. The first thing we need to do is to extract the coverage information of the interesting entities. This can be done using the old Coverage API. 

Coverage API
Coverage API is a simple interface to extract coverage information at a certain point. It is implemented through a predefined struct type named user_cover_struct. To use it, you need to do the following:

1. Define a child of user_cover_structusing like inheritance (my_cover_struct below).
2. Extend its relevant methods (in our example we extend only the end_group() method) and access the relevant members (you can read about the other available methods and members in cdnshelp).
3. Create an instance of the user_cover_structchild and call the predefined scan_cover() method whenever you want to query the data (even in every cycle). Calling this method will result in calling the methods you extended in step 2.  

 The code example below demonstrates these three steps. We chose to extend the end_group() method and we keep the group grade in some local variable. Note that we divide it by 100,000,000 to get a number between 0 to 1 since the grade in this API is an integer from 0 to 100,000,000. 

Pass the Data to a Python Module
After we have extracted the group grade, we need to pass the grade along with the cycle and the coverage group name (assuming there are a few) to a Python module. We will take a look at the Python module itself later. For now, we will first take a look at how to pass the information from the e code to Python. Note that in addition to passing the grade at certain points (addVal method), we need an initialization method (init_plot) with the number of cycles, so that the X axis can be drawn at the beginning, and end_plot() to mark interesting points on the plot at the end. But to begin with, let’s have empty methods on the Python side and make sure we can just call them from the e code.

 # plot_i.py
def init_plot(numCycles):
    print (numCycles)
def addVal(groupName,cycle,grade):
    print (groupName,cycle,grade)
def end_plot():
    print ("end_plot") 

And add the calls from e code:

 Before running this, note that you need to ensure that Specman finds the Python include and lib directories, and Python finds our Python module. To do this, you need to define a few environment variables: SPECMAN_PYTHON_INCLUDE_DIR, SPECMAN_PYTHON_LIB_DIR, and PYTHONPATH. 

 The Python Module to Draw the Plot
After we extracted the coverage information and ensured that we can pass it to a Python module, we need to display this data in the Python module. There are many code examples out there for drawing a graph with Python, especially with matplotlib. You can either accumulate the data and draw a graph at the end of the run or draw a graph interactively during the run itself- which is very useful especially for long runs.

Below is a code that draws the coverage grade of multiple groups interactively during the run and at the end of the run it prints circles around the maximum point and adds some text to it. I am new to Python so there might be better or simpler ways to do so, but it does the work. The cool thing is that there are so many examples to rely on that you can produce this kind of code very fast.

 In the example we used, we had two interesting entities: packet and state_machine, thus we had two equivalent coverage groups. When running our example connecting to the Python module, we get the following graph which is displayed interactively during the run.

When analyzing this specific example, we can see two things. First, packet gets to a high coverage quite fast and significant part of the run does not contribute to its coverage. On the other hand, something interesting happens relating to state_machine around cycle 700 which suddenly boosts its coverage. The next step would be to try to dump graphic information relating to other entities and see if something noticeable happens around cycle 700.

To run a complete example, you can download the files from: https://github.com/okirsh/Specman-Python/

Do you feel like analyzing the coverage behavior in your environment? We will be happy to hear about your outcomes and other usages of the Python interface.

Orit Kirshenberg
Specman team

ST Microelectronics reported their success with IEEE 1801 / UPF low-power simulation using Incisive Enterprise Simulator at CDNLive India in November 2013. We were able to meet with Mohit Jain just after his presentation and recorded this video that explains the key points in his paper.

With eight years of experience and pioneering technology in native low-power simulation, Mohit was able to apply Incisive Enterprise Simulator to a low-power demonstrator in preparation for use with a production set-top box chip.  Mohit was impressed with the ease in which he was able to reuse his existing IEEE 1801 / UPF code successfully, including the power format files and the macro models coded in his Liberty files. Mohit also discusses how he used the power-aware Cadence SimVision debugger.

The Cadence low-power verification solution for IEEE 1801 / UPF also incorporates the patent-pending Power Supply Network visualization in the SimVision debugger.  You can learn more about that in the Incisive low-power verification Rapid Adoption Kit for IEEE 1801 / UPF here in Cadence Online Support.

Just another happy Cadence low-power verification user!

Regards,

 Adam "The Jouler" Sherer 

Hello,

Would anyone know how to setup a PSS or QPSS simulation with 25% dutycycle clock sources or if such a thing is possible with QPSS.

Fig1 (below) is a snapshot of the circuit I am trying to characterize. This has 4 clock ports each with 25%duty cycle in the ON state. Fig2 below shows two of these clocks.

Each path in the circuit consists of two switches with a low pass RC sandwiched in between. The Input is a 50Ohm port sine wave and the output is a 1K resistor. The output nets of all paths are connected together.

I am trying to determine the swept frequency response from input to output (voltage) when the input is from 500Mhz to  510MHz. The Period (T=1/Fp) of each of the pulses is such that Fp=500MHz. The first pulse source has a delay=0, second has delay=T/4, third delay=2T/4, etc...

I am currently getting it working and seeing the correct result (bandpass response) with Transient but the problem is doing a dft at 500MHz with 10KHz spacings needs at least 100us and takes up a lot of time and disk space.

Many Thanks,
Chris.

Fig1

Fig2

I would like to generate the comparison report of database footprint with library footprint if any mismatch available.

Is there a way to take if it possible means can anyone please guide me or share me the skill code please.

Thanks,

Pradeep

Hello All,

May I know if there is a way to breakup a selected clinesegment into a few clinesegments by just using SKILL code

Thanks All

This is the 15th installment of The Rationalist, my column for the Times of India.

It’s election season, and promises are raining down on voters like rose petals on naïve newlyweds. Earlier this week, the Congress party announced a minimum income guarantee for the poor. This Friday, the Modi government released a budget full of sops. As the days go by, the promises will get bolder, and you might feel important that so much attention is being given to you. Well, the joke is on you.

Every election, HL Mencken once said, is “an advance auction sale of stolen goods.” A bunch of competing mafias fight to rule over you for the next five years. You decide who wins, on the basis of who can bribe you better with your own money. This is an absurd situation, which I tried to express in a limerick I wrote for this page a couple of years ago:

POLITICS: A neta who loves currency notes/ Told me what his line of work denotes./ ‘It is kind of funny./ We steal people’s money/And use some of it to buy their votes.’

We’re the dupes here, and we pay far more to keep this circus going than this circus costs. It would be okay if the parties, once they came to power, provided good governance. But voters have given up on that, and now only want patronage and handouts. That leads to one of the biggest problems in Indian politics: We are stuck in an equilibrium where all good politics is bad economics, and vice versa.

For example, the minimum guarantee for the poor is good politics, because the optics are great. It’s basically Garibi Hatao: that slogan made Indira Gandhi a political juggernaut in the 1970s, at the same time that she unleashed a series of economic policies that kept millions of people in garibi for decades longer than they should have been.

This time, the Congress has released no details, and keeping it vague makes sense because I find it hard to see how it can make economic sense. Depending on how they define ‘poor’, how much income they offer and what the cost is, the plan will either be ineffective or unworkable.

The Modi government’s interim budget announced a handout for poor farmers that seemed rather pointless. Given our agricultural distress, offering a poor farmer 500 bucks a month seems almost like mockery.

Such condescending handouts solve nothing. The poor want jobs and opportunities. Those come with growth, which requires structural reforms. Structural reforms don’t sound sexy as election promises. Handouts do.

A classic example is farm loan waivers. We have reached a stage in our politics where every party has to promise them to assuage farmers, who are a strong vote bank everywhere. You can’t blame farmers for wanting them – they are a necessary anaesthetic. But no government has yet made a serious attempt at tackling the root causes of our agricultural crisis.

Why is it that Good Politics in India is always Bad Economics? Let me put forth some possible reasons. One, voters tend to think in zero-sum ways, as if the pie is fixed, and the only way to bring people out of poverty is to redistribute. The truth is that trade is a positive-sum game, and nations can only be lifted out of poverty when the whole pie grows. But this is unintuitive.

Two, Indian politics revolves around identity and patronage. The spoils of power are limited – that is indeed a zero-sum game – so you’re likely to vote for whoever can look after the interests of your in-group rather than care about the economy as a whole.

Three, voters tend to stay uninformed for good reasons, because of what Public Choice economists call Rational Ignorance. A single vote is unlikely to make a difference in an election, so why put in the effort to understand the nuances of economics and governance? Just ask, what is in it for me, and go with whatever seems to be the best answer.

Four, Politicians have a short-term horizon, geared towards winning the next election. A good policy that may take years to play out is unattractive. A policy that will win them votes in the short term is preferable.

Sadly, no Indian party has shown a willingness to aim for the long term. The Congress has produced new Gandhis, but not new ideas. And while the BJP did make some solid promises in 2014, they did not walk that talk, and have proved to be, as Arun Shourie once called them, UPA + Cow. Even the Congress is adopting the cow, in fact, so maybe the BJP will add Temple to that mix?

Benjamin Franklin once said, “Democracy is two wolves and a lamb voting on what to have for lunch.” This election season, my friends, the people of India are on the menu. You have been deveined and deboned, marinated with rhetoric, seasoned with narrative – now enter the oven and vote.

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

Hi supporters,

I got the following error while I run simulation with gate netlist using Cadence Incisive (v15.20):

----

ncsim(64): 15.20-s076: (c) Copyright 1995-2019 Cadence Design Systems, Inc.
ncsim: *E,DLOALB: Design library 'tcbnxxx' not defined while reading module tcbnxxx.MAOxxx:bv (VST).
ncsim: *F,NOSIMU: Errors initializing simulation 'alu_tb' 

----

xxx: standard library name.

My netlist design uses a cell "MAOxxx". I already included the library behavior model to compile using ncverilog, there is no error while compiling. But when I run with ncsim to execute the test, I got above error.

I tried to run with other vendors such as VCS or MTI, they worked.

Please help to understand the error.

Thanks.

I'm sending encrypted HDL to a customer who will use Cadence IES for simulation and was wondering how I should go about the encryption.

Does IES support the IEEE's P1735 and if so, where can I find Cadence's public key for performing the encryption?

Or is there an alternative solution that I can use for encryption?

I am importing sessions which are run by other people to analyse and I would like to remove them from my vManager Regressions tab as they become obsolete. As I am not the original person who run the sims, I cannot "delete" sessions. What are my options? Thanks.

hi,

due to technical problem i am running simulation through terminal. Therefore, I have a Verilog file, a test bench and i have also exported from Genus synthesized netlist and sdf file. Now, how can i annotate sdf in my post-synthesis simulation using XCELIUM while using command line?

thank you

Greeting to all:

I am new in this tool, only 2 weeks. Trying to create a new Via with smaller size drill hole from exiting 13 mils size to 10 mils size. I got the message as imaged below. Any advise what to do?  Thanks in advance.

Hi,

I have a new customer that uses Allegro Design entry HDL for the schematic and have a few questions.

1. How do you get pin/gate swaps into the symbols in the schematic ?

2. How do you transfer them to the pcb editor ?

3. How do you back annotate the swaps from the pcb editor to the schematic ?

4. How do you stop the export/Import physical from updating the constraints in the pcb file ? 

Hello All,

starting with version 8.1 the contents of the ce_tools directory will no longer
be shipped with Specman. The directory contains some unsupported AE/R&D
ware and has not been updated for several releases (i.e. most of those old
packages don't work with the latest release).
 
Attached is the contents of this directory. Please read the README before
using any of the packages.


Regards,
-hannes

Question for forum:

I’m currently working on a code to automatically add CLP files to DRA files and then add two classes called “APPROVED” and “CLP”. To do this manually you have to open a DRA file, click file import subdrawing and choose the clp file with the same name as dra. (path already set). You then set the clp to position x 0 0. And then click on Set Up > Subclasses > Package geometry and type in “Approved” and “Clp.”

So far we’ve recorded the macros in Allegro for all of these actions. The macros correspond to one specific file name and we want to apply this to numerous files. To do this we created a python program that locates all of the specified CLP and DRA files, and if they have a matching name, runs a for loop that puts each file name into a stored variable that runs a loop for each file. We converted this script into batch and then added a function that we thought would run Allegro macros from batch.

In order to get the script working, we need to have an allegro batch command that will run the script without opening the Allegro start popup, or closing the popup when it appears.  We need to do this to run any script from starting Allegro.

I’ve done another similar program in batch where I made a for loop for each dra file and within the loop there was a batch a2dxf command that converted all dra files to dxf files. Is there a similar batch command for adding clp files to position 0 0 and/ or adding classes? If anyone has done something similar please let me know!

Thank you very much for the help.

Jen

Hello,

I am trying to import multiple verilog modules defined in a single file with "`define" directive in the top using Verilog In. The code below is an example of what my file contains.

When I use the settings below to import the modules into a library, it imports it correctly but completely ignores all `define directive; hence when I simulate using any of the modules below the simulator errors out requesting these variables.

My question: Is there a way to make Verilog In consider `define directives in every module cell created? 

Code to be imported by Cadence Verilog In:

--------------------------------------------------------

`timescale 1ns/1ps
`define PROP_DELAY 1.1
`define INVALID_DELAY 1.3

`define PERIOD 1.1
`define WIDTH 1.6
`define SETUP_TIME 2.0
`define HOLD_TIME 0.5
`define RECOVERY_TIME 3.0
`define REMOVAL_TIME 0.5
`define WIDTH_THD 0.0

`celldefine
module MY_FF (QN, VDD, VSS, A, B, CK);

inout VDD, VSS;
output QN;
input A, B, CK;
reg NOTIFIER;
supply1 xSN,xRN;
buf IC (clk, CK);
and IA (n1, A, B);
udp_dff_PWR I0 (n0, n1, clk, xRN, xSN, VDD, VSS, NOTIFIER);
not I2 (QN, n0);

wire ENABLE_B ;
wire ENABLE_A ;
assign ENABLE_B = (B) ? 1'b1:1'b0;
assign ENABLE_A = (A) ? 1'b1:1'b0;

specify
$setuphold(posedge CK &&& (ENABLE_B == 1'b1), posedge A,  `SETUP_TIME, `HOLD_TIME, NOTIFIER);
$setuphold(posedge CK &&& (ENABLE_B == 1'b1), negedge A, `SETUP_TIME, `HOLD_TIME, NOTIFIER);
$setuphold(posedge CK &&& (ENABLE_A == 1'b1), posedge B, `SETUP_TIME, `HOLD_TIME, NOTIFIER);
$setuphold(posedge CK &&& (ENABLE_A == 1'b1), negedge B, `SETUP_TIME, `HOLD_TIME, NOTIFIER);
$width(posedge CK,1.0,0.0,NOTIFIER);
$width(negedge CK,1.0,0.0,NOTIFIER);
if (A==1'b0 && B==1'b0)
(posedge CK => (QN:1'bx)) = (1.0, 1.0);
if (A==1'b1 && B==1'b0)
(posedge CK => (QN:1'bx)) = (1.0, 1.0);
if (B==1'b1)
(posedge CK => (QN:1'bx)) = (1.0,1.0);

endspecify

endmodule // MY_FF
`endcelldefine

`timescale 1ns/1ps
`celldefine
module MY_FF2 (QN, VDD, VSS, A, B, CK);

inout VDD, VSS;
output QN;
input A, B, CK;
reg NOTIFIER;
supply1 xSN,xRN;
buf IC (clk, CK);
and IA (n1, A, B);
udp_dff_PWR I0 (n0, n1, clk, xRN, xSN, VDD, VSS, NOTIFIER);
not I2 (QN, n0);

wire ENABLE_B ;
wire ENABLE_A ;
assign ENABLE_B = (B) ? 1'b1:1'b0;
assign ENABLE_A = (A) ? 1'b1:1'b0;

specify
$setuphold(posedge CK &&& (ENABLE_B == 1'b1), posedge A,  `SETUP_TIME, `HOLD_TIME, NOTIFIER);
$setuphold(posedge CK &&& (ENABLE_B == 1'b1), negedge A,  `SETUP_TIME, `HOLD_TIME, NOTIFIER);
$setuphold(posedge CK &&& (ENABLE_A == 1'b1), posedge B,  `SETUP_TIME, `HOLD_TIME, NOTIFIER);
$setuphold(posedge CK &&& (ENABLE_A == 1'b1), negedge B,  `SETUP_TIME, `HOLD_TIME, NOTIFIER);
$width(posedge CK,1.0,0.0,NOTIFIER);
$width(negedge CK,1.0,0.0,NOTIFIER);
if (A==1'b0 && B==1'b0)
(posedge CK => (QN:1'bx)) = (1.0, 1.0);
if (A==1'b1 && B==1'b0)
(posedge CK => (QN:1'bx)) = (1.0, 1.0);
if (B==1'b1)
(posedge CK => (QN:1'bx)) = (1.0,1.0);

endspecify

endmodule // MY_FF2
`endcelldefine

--------------------------------------------------------

I am using the following Cadence versions:

MMSIM Version: 13.1.1.660.isr18

Virtuoso Version: IC6.1.8-64b.500.1

irun Version: 14.10-s039

Spectre Version: 18.1.0.421.isr9

Hi,

I tried to open my layout by Library Manager, but the Virtuoso CIW window sometimes pops up the follow WARNING messages( as picture depicts). Thus, layout can't open.

Sometimes, I try to reconfigure ICADV12.3 by the iscape and restart my VM and then it incredibly works! But, often not!

So, If anyone knows what it is going on. Please let me know! Thanks!

Appreciated so much   

Hello,

I am using ultrasim Version 18.1.0.314.isr5  64bit 03/26/2019 06:33 (csvcm20c-2).

When I run my netlist, ultrasim is blocked in the first DC stage and takes forever. Then it will fail or never progress. I am using a 22nm BSIMBULK model. I tried to tune different accuracy and convergence aids options but noting works.

 When I run the same netlist with spectre it works fine with no problem.

Also, If I use another model (not BULKSIM), ultrasim will work and converge with no problem.

My first feeling is that ultrasim has a problem with using BSIMBULK model.

Could you please advice,

Thank you,

Kotb

Cadence Liberate Trio Characterization Suite, ARM-based Graviton Processors, and Amazon Web Services (AWS) Cloud have joined forces to cater to the High-Performance Computing, Machine Learning/Artificial Intelligence, and Big Data Analytics sectors. (read more)

Here is another blog in the multi-part series that aims at providing in-depth details of electromagnetic analysis in the Virtuoso RF solution. Read to learn about the nuances of port setup for electromagnetic analysis.(read more)

The way you need blocks of different sizes and styles to build great Lego masterpieces, a complex WSP-based design requires stitching together routing regions with multiple patterns that follow different WSSPDef periods. Let's see how you can achieve this. (read more)