To celebrate September as National Preparedness Month, more than 45 public safety agencies, nonprofits, and utilities will join together for the 18th Annual Family Emergency Preparedness Day on Saturday, September 14, from 10 a.m. to 2 p.m. at Brecknock County Park, 80 Old Camden Road, Camden, Delaware. There is no cost to attend and free parking is available onsite at the park. There is no rain date. The event offers attendees a chance to meet first responders and public safety experts in a fun, friendly environment where families can find a wealth of information and resources to promote emergency preparedness and help them “make a plan, build a kit, and stay informed” by visiting PrepareDE.org. Family Emergency Preparedness Day is sponsored by the Delaware Emergency Management Agency (DEMA), Kent County Parks and Recreation, Kent County Department of Public Safety, Delaware State Fire School, and the Delaware Division of Public Health’s Office of Preparedness.

WILMINGTON, Del. – Governor John Carney announced today that after two breaches this year and recent near-breaches of coastal dunes just north of the Indian River Inlet, the state Department of Transportation (DelDOT) will add additional metal sheets and the Department of Natural Resources and Environmental Control (DNREC) will perform an emergency sand replenishment project […]

The Delaware Emergency Management Agency (DEMA), the Delaware State Police, and Public Service Enterprise Group Inc. (PSEG), will conduct a quarterly test of the Salem/Hope Creek Nuclear Generating Stations Alert and Notification system on Tuesday, October 1, at 10:45 a.m.

The Delaware Department of Elections (DOE) informs eligible Delaware residents who are not yet registered to vote in Delaware and who wish to vote in the November 5, 2024, General Election that they must register to vote on or before Saturday, October 12, 2024 at 11:59 p.m. in order to vote in the General Election.

No matter what your brand's level of marketing maturity is, SAS can help you move from data to insight to action with rich functionality for adaptive planning, journey activation and an embedded real-time decision engine – all fueled by powerful analytics and artificial intelligence (AI) capabilities. Let's begin with a [...]

SAS Customer Intelligence 360: Introduction to marketing data management was published on Customer Intelligence Blog.

Customer data platforms (CDPs), data management platforms (DMPs), people-based marketing, identity graphs, and more overlapping topics represent an important ingredient of any martech brainstorming session in 2020. As your brand spreads out across touchpoints — from web to mobile applications, as well as call centers, email and direct mail — [...]

SAS Customer Intelligence 360: Identity management, profiling and unified data model for hybrid marketing was published on Customer Intelligence Blog.

There's no question that we're all increasingly, and often exclusively, interacting with brands digitally. Consumers are now online through countless mechanisms – from laptops and mobile apps to AI-enabled voice assistants and sensor-based wearables. Engagement is diversifying in fascinating new ways. And when organizations can't see their customers interacting in [...]

SAS Customer Intelligence 360: Behavioral event tracking, targeting & engagement analysis was published on Customer Intelligence Blog.

Over the last 20+ years, global society has adopted digital devices at scale, and consumer interaction behaviors continually evolve and mature. As analysts, we're uniquely positioned to notice worldwide trends, country-specific nuances and localized market behaviors that can have significant impact on our brand's business goals. This global scope is [...]

SAS Customer Intelligence 360: Enriching analysis with device usage data was published on Customer Intelligence Blog.

One of the wonderful aspects about my client-facing role at SAS is the breadth of audiences that I get to work with. No matter where you fall on this list: Data engineer. Business or marketing analyst. Citizen data scientist. Data scientist. Statistician. Executive. One topic is certain: We all love [...]

SAS Customer Intelligence 360: Automated explanation and supervised segmentation was published on Customer Intelligence Blog.

According to the SAS Experience 2030 global study, by the year 2030 67% of in-person customer engagements (think sales assistance and information queries) will be completed by smart machines rather than humans. And while it may seem a bit ironic, the most personalized customer experiences could involve no people at [...]

SAS Customer Intelligence 360: Make better decisions with analytically driven marketing was published on Customer Intelligence Blog.

We live in the age of data. From global warming stats to customer behavior patterns, new technologies have made it easier to collect, store, access and analyze information. But our use of these technologies has also eroded our attention spans and fueled post-truth misunderstandings. To combat these trends, the question [...]

SAS Customer Intelligence 360: Visual analytics, sankey diagrams and customer journeys was published on Customer Intelligence Blog.

Everything happens somewhere, and much of our customer data includes location information. Websites include x, y coordinates in semi-structured click streams, and the mobile apps your prospects depend on frequently support device location to provide a personalized, targeted experience. As my SAS peer Robby Powell said: "Human brains are hardwired [...]

SAS Customer Intelligence 360: Data visualization, location analytics and geospatial insights was published on Customer Intelligence Blog.

Government employees charged with monitoring environmental compliance face a downpour of information, wading through countless reports and stacks of paperwork to accomplish their mission. To help these dedicated public servants increase productivity, agencies should consider a broader set of tools to control pollution, enforce regulations and improve compliance. Although foundational [...]

The post Time for government agencies to embed data and AI into environmental compliance appeared first on Government Data Connection.

Read the in depth Review of PTron Tangent Evo Audio Video. Know detailed info about PTron Tangent Evo configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Dell XPS 9300 10th Gen Intel core i7-1065G7 (2020) Laptops. Know detailed info about Dell XPS 9300 10th Gen Intel core i7-1065G7 (2020) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Beyerdynamic T1 (3rd Generation) Audio Video. Know detailed info about Beyerdynamic T1 (3rd Generation) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of B&O Beoplay A9 4th Gen Audio Video. Know detailed info about B&O Beoplay A9 4th Gen configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of iQOO 7 Legend Mobile Phones. Know detailed info about iQOO 7 Legend configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Asus ZenBook Pro Duo 15 OLED 10th Gen Core i7-10870H (2021) Laptops. Know detailed info about Asus ZenBook Pro Duo 15 OLED 10th Gen Core i7-10870H (2021) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Motorola Moto G (2nd Gen) Mobile Phones. Know detailed info about Motorola Moto G (2nd Gen) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Fujitsu UH-X Thin & Light 11th gen Core i7 (2021) Laptops. Know detailed info about Fujitsu UH-X Thin & Light 11th gen Core i7 (2021) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of iPad Mini 2021 (6th Generation) Tablets. Know detailed info about iPad Mini 2021 (6th Generation) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of ASUS ExpertBook B1 11th Gen Core i5-1135G7 (2022) Laptops. Know detailed info about ASUS ExpertBook B1 11th Gen Core i5-1135G7 (2022) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Asus Zenbook 14X OLED (Space Edition) UX5401ZAS 12th Gen core i9-12900H (2022) Laptops. Know detailed info about Asus Zenbook 14X OLED (Space Edition) UX5401ZAS 12th Gen core i9-12900H (2022) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Apple iPad (10th generation) Tablets. Know detailed info about Apple iPad (10th generation) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Apple AirPods Pro (2nd generation) Audio Video. Know detailed info about Apple AirPods Pro (2nd generation) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Amazon Echo Dot (5th Gen, 2023) Audio Video. Know detailed info about Amazon Echo Dot (5th Gen, 2023) configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Lexar NM760 M.2 2280 PCIe Gen4 NVMe SSD Storage. Know detailed info about Lexar NM760 M.2 2280 PCIe Gen4 NVMe SSD configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of MSI Titan GT77 HX 13VI 13th Gen Core i9-13950HX Laptops. Know detailed info about MSI Titan GT77 HX 13VI 13th Gen Core i9-13950HX configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Lenovo Legion Pro 5i 13th Gen Core i7-13700HX Laptops. Know detailed info about Lenovo Legion Pro 5i 13th Gen Core i7-13700HX configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Dell XPS 17 9730 13th Gen Laptops. Know detailed info about Dell XPS 17 9730 13th Gen configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

With containers, you can build once, run anywhere – no worries about underlying dependencies.

The post How containers have moved us to next-gen virtualization appeared first on The Data Roundtable.

Born in a poor village, Algerian boxer Imane Khelif has overcome numerous obstacles throughout her life to win a controversial Paris Olympics gold on Friday.

[DA] Note to editors: Please find attached soundbite by Ian Cameron MP.

Cadence tapes out 32G UCIe interface IP for high speed, highly efficient chiplet designs and demonstrate high data rate performance in TSMC's 3nm technology(read more)

Hi everyone,

I'm new to using Innovus and I'm encountering an issue while trying to perform the "init_design" command. My goal is to perform the place and route. Here are the commands I'm using:

``
set init_verilog ./test.v
set init_top_cell TEST
set init_pwr_net {VDD VDD_2 VDD_3}
set init_gnd_net {VSS VSSA}
set init_lef_file { /home/laumecha/uw_openroad_free45/pdk/Drexel-ECEC575/Encounter/NangateOpenCellLibrary/Back_End/lef/NangateOpenCellLibrary.lef}
set init_mmmc_file {./viewDefinition.tcl}
init_design
```

However, I receive the following error:

```
#% Begin Load netlist data ... (date=06/04 12:07:50, mem=1478.7M)
*** Begin netlist parsing (mem=1439.0M) ***
Created 0 new cells from 0 timing libraries.
Reading netlist ...
Backslashed names will retain backslash and a trailing blank character.
**ERROR: (IMPVL-209):   In Verilog file './test.v', check line 16 near the text # for the issue: 'syntax error'.  Update the text accordingly.
Type 'man IMPVL-209' for more detail.
Verilog file './test.v' has errors!  See above.

*** Memory Usage v#1 (Current mem = 1439.027M, initial mem = 634.098M) ***
#% End Load netlist data ... (date=06/04 12:07:50, total cpu=0:00:00.0, real=0:00:00.0, peak res=1478.7M, current mem=1478.7M)
**ERROR: (IMPVL-902):   Failed to read netlist ./test.v. See previous error messages for details.  Resolve the issues and reload the design.
```

However, the file works perfectly in Genus.

It seems there is a syntax error in my Verilog file at line 16, but I'm not sure how to resolve it. Any guidance or suggestions would be greatly appreciated.

Thanks in advance!

I am trying to remove the cdn_loop_breaker cells from the netlist. 
When I tried the below 2 things, genus synthesis tool removing the cdn_loop_breaker cells but while connecting the cdn_loop_breaker cell input to its proper connection, its somehow misleading the connections

Things i tried:
1.  remove_cdn_loop_breaker -instances *cdn_loop_breaker*
then i just ran remove_cdn_loop_breaker  comand without the -instances switch
2. remove_cdn_loop_breaker  
     
both of the above things are not providing the proper connections after removing the loop_breaker_cells

can anyone suggest the best possible workaround for this please?

Hi, I'm using genus (Version 21.14-s082_1) to synthesis a VHDL-design with multiple power-domains. After reading the power intent file and calling 'apply_power_intent',  I get the following warning:

Warning : Potential problem while applying power intent of 1801 file. [1801-99]
: Cannot find any instance for scope '/:CHIP_TOP'. Rest of commands in this scope will be skipped (set_scope:../../upf/CHIP_TOP.upf:2).
: Check the power intent. If the scenario is expected, this message can be ignored.

The fist two lines of CHIP_TOP.upf:

upf_version 3.1
set_scope :CHIP_TOP

I simulated the same  UPF and VHDL files with Xeclium and was able to verify all the IEEE1801/UPF aspects I need without any problems. I don't know, why genus is having a problem with the 'scope'.
In genus, after getting the warning, running 'set_db power_domain:CHIP_TOP/BLOCK_A/PD_CORE_D .library_domain PD0V5' returns the following error:

Error : <Start> word is not recognized. [TUI-182] [set_db]
: 'power_domain:CHIP_TOP/BLOCK/PD_CORE_D' is not a recognized object/attribute. Type 'help root:' to get a list of all supported objects and attributes.
: Check if the given <Start> word is a valid object_type, object or attribute.

Running 'commit_power_intent' gives me:

Started inserting low power cells...
====================================
Info : Command 'commit_power_intent' cannot proceed as there are no power domains present. [CPI-507]
: Design with no power domains is 'design:CHIP_TOP'.
Completed inserting low power cells (runtime 0.00).
====================================================

I'm suspecting that the problem lies in 'set_scope' and VHDL. I never had such problems with Verilog. I tried every way to reference the hierarchy in the code and now I'm at my wit's end and I need your help o/
How to set the scope with 'set_scope' in UPD 3.1 to the toplevel in VHDL, so that genus accepts it? Or is the problem caused by something else?

Best,

Iqbal

I have a standard cell library containing LEF, GDS, and spice models but no OA views. I'm unable to import these files into Virtuoso without a LayerMap file. How can I obtain or generate this required LayerMap file?

Dear all, 

I'm trying to perform an LVS check using Calibre between a layout that was generated by Innovus and the initial netlist generated by Genus. However, once I hit Run LVS on Calibre, it reports the following warnings and recommends to stop the process:

Source netlist references but does not define more than 10 subckts:
DFD1BWP7T
DFKCND1BWP7T
DFKCNQD1BWP7T
DFKSND1BWP7T
DFQD1BWP7T
IND2D0BWP7T
INR2D0BWP7T
INVD0BWP7T
INVD2P5BWP7T
IOA21D0BWP7T
... (and more)

If I proceed the LVS process it shows lots of errors as shown in the following image:

Why Genus doesn't include the definition of those sub circuits in the generated netlist? Is this related to Flat/Hierarchy netlisting? 

I have included my Genus scripts as well as the generated netlist in the attachments (and here - if attachment don't work).

Many thanks,

Anas

Hi everyone, 

Is there any method to generate "Sheet" column for a pin report like table below? The column "Name.Pin" & "Signal" can be generated easily, but I have no idea to generate the column of "Sheet Name".

The software using here are Allegro Design Entry HDL, OrCAD Capture and Allegro PCB Editor. Can these 3 software generate "Sheet Name" data?

Thank you. 

The rising customer expectations, intermingling fields and high performance needs can be satisfied with the system based design. An intelligent Systems Design strategy can offer a quicker route to an optimum design and helps to increase designers' productivity and analyzes efficiency by providing the ability to explore the entire design space. Cadence Intelligent System Strategy enables a system design revolution and reduces project schedules with optimized continuous integration.(read more)

Hello Fellow PCB Designers,

We have a 10 layer PCB design that originated in Pads and was converted over to Allegro 17.4, this is an old design but is manufacturable and works perfectly fine.  When I try to generate a Gerber for the Top or Bottom layers

the Gerber comes out fine.  But Most of the middle layers are Etch's and via's for power and grounds, but the Gerber's come mostly blank, there might be some details, but in the Gerber view everything is displayed correctly.

The design does have many close spacings, I have not changed anything in the constrains manager yet, turned off a lot of the DRC's, but thinking there might be something wrong with the constrains.

  I find that the CSet is set to 2_18, not sure yet what this means, also there are many of these definitions, PCS 3,4,5,ect, are the same as CSet 2_18 any suggestions would be great, we are currently looking into this, have seen

that even small change in constraint manager can cause long processing and even Allegro crashing, this is a large project.

Thanks Much, Thanks, Mike Pollock.

Hello everyone, 
I have a testbench for generating s2p files from a SP simulation that was working until few months ago. Today I have reopened (w/o making changes that I am aware of) and I get the error as shown below:

first I show the testbench settings:

notice how the s2p generation is disabled: the field "file" is left blank

in the corner I defined some parameters, "filename" is the word that is suppose to generate the name for the s2p. 

where the two variables are defined as follows

And now the output log:

spectre.out file gives the following error:


When clicking on the error message at "9", the input.scs file opens up and the line 9 gets highlighted in green



now, so far I understood that the problem seem to be related tom the "pathcds" variable, but I really don't understand what the error message here means, since I don't see any error in the input.scs file

by the way - if for instance I define the variable "filename" as shown below, then I get no errors:

thanks
Tommaso

I've heard lots of people asking for a way to generate Makefiles for Specman code, and it seems there are some who don't use "irun" which takes care of this automatically. So I wrote this little utility to build a basic Makefile based on the compiled and loaded e code.

It's really easy to use: at any time load the snmakedeps.e into Specman, and use "write makefile <name> [-ignore_test]".
This will dump a Makefile with a set of variables corresponding to the loaded packages, and targets to build any compiled modules.
Using -ignore_test will avoid having the test file in the Makefile, in case you switch tests often (who doesn't?).

It also writes a stub target so you can do "make stub_ncvlog" or "make stub vhdl" etc.

The targets are pretty basic, I thought it was more useful to #include this into the main Makefile and define your own more complex targets / dependencies as required.

The package uses the "reflection" facility of the e language, which is now documented since Specman 8.1, so you can extend this utility if you want (please share any enhancements you make).

 Enjoy! :-)

Steve.

As noted in white papers, posts on the Team Specman Blog, and the Specman documentation, IntelliGen is a totally new stimulus generator than the original "Pgen" and, as a result, there is some amount of effort needed to migrate an existing verification environment to fully leverage the power of IntelliGen.  One of the main steps in migrating code is running the linters on your code and adressing the issues highlighted. 

Included below is a simple utility you can include in your environment that allows you to collect some valuable statistics about your code base to allow you to better gauge the amount of work that might be required to migrate from Pgen to IntelliGen.  The ICFS statistics reported are of particular benefit as the utility not only identifies the approximate number of ICFSs in the environment, it also breaks the total number down according to generation contexts (structs/units and gen-on-the-fly statements) allowing you to better focus your migration efforts. 

IMPORTANT: Sometimes a given environment can trigger a large number of IntelliGen linting messages right off the bat.  Don't let this freak you out!  This does not mean that migration will be a long effort as quite often some slight changes to an environment remove a large number of identified issues.  I recently encountered a situation where a simple change to three locations in the environment, removed 500+ ICFSs!

The methods included in the utility can be used to report information on the following:
- Number of e modules
- Number of lines in the environment (including blanks and comments)
- Number and type of IntelliGen Guidelines linting messages
- Number of Inconsistently Connected Field Sets (ICFSs)
- Number of ICFS contexts and how many ICFSs per context
- Number of soft..select overlays found in the envioronment
- Number of Laces identified in the environment

To use the code below, simply load it before/after loading e-code and then
you can execute any of the following methods:

- sys.print_file_stats()             : prints # of lines and files
- sys.print_constraint_stats()   : prints # of constraints in the environment
- sys.print_guideline_stats()    : prints # of each type of linting message
- sys.print_icfs_stats()            : prints # of ICFSs, contexts and #ICFS/context
- sys.print_soft_select_stats() : prints # of soft select overlay issues
- sys.print_lace_stats()           : *Only works for SPMNv6.2s4 and later* prints # of laces identified in the environment

Each of the above calls to methods produces it's own log files (stored in the current working directory) containing relevant information for more detailed analysis.
- file_stats_log.elog : Output of "show modules" command
- constraint_log.elog : Output of the "show constraint" command
- guidelines_log.elog : Output of "gen lint -g" (with notification set to MAX_INT in order to get all warnings)
- icfs_log.elog       : Output of "gen lint -i" command
- soft_select_log.elog: Output of the "gen lint -s" command
- lace_log.elog       : Output of the "show lace" command

Happy generating!

Corey Goss

Hi, newbie here.

We are using AWR Design Enviroment in our university and so I have to install it (OS: Arch Linux)
I installed it in a Windows 10 VM without problems.

When I try to start it prompts "Failed to connect to license server", I guess thats the first problem.

After that when trying to generate my SUL License it will prompt Internal Error -8 (see Image)

I can't find something on Error -8 :/ and overall the available data to the license topic is quit low :/

If someone has a solution for that I would gladly hear about it :)

Sample clues

18 across: Makoto Hagiwara and David Jung both claim to have invented it (7,6)

1 down: French impressionist who rejected that term (5)

3 down: Artificial surface used for playing hockey (9)

7 down: The sequel to Iliad (7)

12 down: Adipose tissue (4,3)

Extrowords © 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic

Sample clues

6 across: Franchise revived by Frank Miller (6)

13 across: What Keanu Reeves and Zayed Khan have in common (5)

18 across: What Frank Sinatra and George Clooney have in common (6,6)

19 across: Dosa mix, for example (6)

2 down: Green, in a non-environmental way (7)

Extrowords © 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic

Sample clues

5 down: Torso covering (6)

7 down: Government by rogues (12)

15 across: eBay speciality (7)

18 across: Demonic (8)

20 across: Common language (6,6)

Extrowords © 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic