Powerful. Tough. Future-Proof.(NYB)

Very stylish, very industrial(NYM)

The future will be IT driven, we make you part of it(NY5[][]-1)

High-speed, high-precision motion controller plus PC - in one box(NY51[]-A)

Topics

Topics

Topics

Those cameras make the conventional systems simpler, faster and more flexible. Also they make it easy to assist the visual inspection to capture enlarged images without pc.(STC / FS Series)

Firm Also Hosts Events for EmoryLaw@Work and Business Executives for National Security

StoneAge acquired Breadware, Inc., an IoT product development company headquartered in Reno, Nevada to expand its capacity to deliver robotic and IoT-enabled solutions.

Security is an issue for most software developers but the high security requirements needed for industrial Internet of Things is the number one challenge.

High Demand by Construction Contractors, Manufacturers, Trucking and Warehousing Firms Prompts Expansion

Industrial construction and engineering company provides services for large projects in southern california

ARMOR has just reached an important milestone in the production of its flexible organic photovoltaic film, ASCA©.

Current CEO set to retire after leading company for over 30 years.

BHS custom manufactures industrial parcel lockers for businesses in need of a secure, convenient solution for 24/7 order pick-up.

Cisco’s Talos threat intelligence and research group revealed on Wednesday that one of its researchers discovered a critical remote code execution vulnerability in the CODESYS Control SoftPLC industrial controller software.

read more

This online course is available – for free – to anyone interested in building practical skills in using data to solve problems better.

Beaten down banking and industrial stocks likely to outperform in near term: Taher Badshah

The article ‘Tracing the energy footprints of Indonesian manufacturing industry’ by Yales Vivadinar, Widodo W. Purwanto & Asep H. Saputra from Department of Chemical Engineering, Universitas Indonesia, Depok, Indonesia (published as Open Access in: Energy Science and Engineering 2016; 4(6): 394–405) looks at typical energy usage in different industrial manufacturing sectors in Indonesia.

There are Sankey diagrams representing “energy maps” for basic chemicals, cement, pulp, paper, spinning, weaving and textile finishing. I am showing two of them below. The first one is for the basic chemical industry.

Flows are in kboe (thousand barrels oil equivalent) for the year 2013. Losses are shown as grey arrows. The second one is for textile finishing:
[See image gallery at www.sankey-diagrams.com]
For those of you interested, please read the full paper here.

We’ve had lots of discussions here and elsewhere online about fundamental flaws in statistics culture: the whole p-value thing, statistics used for confirmation rather than falsification, corruption of the pizzagate variety, soft corruption in which statistics is used in the service of country-club-style backslapping, junk science routinely getting the imprimatur of the National Academy of […]

The invention relates to a so-called zero emission ‘AST-CNR/ITM system’ modular plant for removal of pollutants from flue gases produced by industrial processes. The plant comprises prefabricated modular elements with programmed and automatic operation, easy to mount and assemble on site without undergoing expensive plant stoppage. Each module or ‘reaction tower’ comprises a plurality of sections vertically arranged on top of one another, which carry out the following functions: Removal of particulate matter with treatment and removal of chemical pollutants, such as heavy metals, chlorides, fluorides Treatment and removal of SOx Treatment and removal of NOx Capture of CO2 Production of hydrogen Production of methanol. The various sections may be combined according to the requirements of the plant and of the flue gases to be treated.

An abrasive article including a base having an annular shape defining a central opening; and a mounting assembly coupled to the base, wherein a portion of the mounting assembly is under a compressive force, and a grinding segment coupled to the mounting member.

A high temperature industrial furnace roof system having first and second spaced apart hanger brick rows with a filler row disposed therebetween and a cable system including a plurality of electrical cables. The filler row includes a plurality of filler elements having at least one removable heating module with a heat source. The cable system operatively connects the heat source with a power source and permits the removable heating module to be removed from the respective filler element while the respective heat source remains operatively connected with the power source.

A communication process between two constitutive elements of the network of electricity distribution in a domestic or industrial premise including circuit breakers, electrical modules, switches, electrical plugs and light connection devices. The process including the following steps: assignment by a protocol such as DHCP, BootP or RARP of a first IP address to a first element of the power distribution network, assignment of a second IP address to a second element, and establishment of a communication between the first and second elements of the power distribution network.

An industrial spark plug (20) includes a central electrode (24) with a central base (30) formed of a nickel-based material and a central firing tip (32) formed of an iridium-based material. The central firing tip (32) has a tip thickness (tct) of 0.02 to 0.03 inches, a tip diameter (dct) of 0.1184 to 0.1776 inches, and an aspect ratio of 4.736 to 7.104. The central firing tip (32) is electron beam welded to the central base (30) to provide a robust joint therebetween. The central electron beam weld (36) includes a mixture of re-crystallized iridium-based material and re-crystallized nickel-based material extending continuously along and over the entire welding interface. The spark plug (20) also includes a ground electrode (26) with a ground firing tip (38) electron beam welded to a ground base (42).

An industrial two-layer fabric includes an upper side fabric and a lower side fabric. The upper side warps of the upper side fabric comprise a first warp set and a second warp set. The first warp set contains two upper side warps and a warp binding yarn that binds the upper side fabric and the lower side fabric. The two upper side warps are woven with the same upper side wefts. The second warp set contains one upper side warp. At a position where the warp binding yarn passes above one of the upper side wefts, the warp binding yarn is placed between the two upper side warps of the first warp set and pass below the same one of the upper side wefts, whereby the two upper side warps and the warp binding yarn of the first warp set form the upper side warp design.

An industrial two-layer fabric includes a first warp set and a second warp set that are placed alternately and form a weave design of the upper side fabric. The first warp set contains two upper side warps. At least one of the upper side warps of the first warp set functions as a warp binding yarn that binds the upper side fabric and the lower side fabric. The second warp set contains one of upper side warps and one of lower side warps placed below the one of the upper side warps. At a position where two adjacent lower side warps are woven with one of the lower side wefts, the warp binding yarn placed between the two adjacent lower side warps is woven with the same one of the lower side wefts.

A multilayer fabric is joined by engaging joining loops formed at both ends of a disjoined industrial multilayer fabric having wefts and warps in layers. The joining loops are formed by folding back some or all the end portions of warps. The both ends of the fabric are joined by engaging the loops to form a common hole and inserting a core wire into the common hole. At least one upper side weft remains while a lower side weft below the remaining upper side weft is removed at the both ends of the fabric. The common hole and the core wire inserted therein are located below the remaining upper side weft. The folded portions of the warps are interwoven with wefts of a normal portion of the fabric.

An industrial two-layer fabric has an inner space between an upper side fabric and a lower side fabric. Some or all of upper side wefts or lower side wefts are secondary wefts interwoven with upper side warps or lower side warps so as to make the number of warps passing on an upper surface of the upper side fabric or passing on a lower surface of the lower side fabric larger than that on an inner space side of the upper or lower side fabric and a long crimp in the inner space is formed by the secondary weft.

A wall lining of industrial ovens for protecting from corrosion, in particular, a heat-resistant wall made of concrete, steel, sheet metal, or the like. The lining of the wall is made of at least two layers, wherein a layer is pressurized as a blocking layer.

An industrial fluid circulating system having at least one fluid circulation circuit, includes a plurality of pumps connected in parallel to circulate the fluid through each of the fluid circulation circuit, a separate motor driving each pump, a load detector to sense operating loads on the system and each circuit, and a speed control to vary the speed of each motor to thereby vary the pumping capacity of each pump in response to the detected load on the system, each pump of each respective circuit running simultaneously at a substantially similar speed or a predetermined equal reduced speed of the respective circuit or an almost equal reduced speed or a similar reduced speed.

A mining shovel includes a boom and a transmission unit coupled to the boom. The transmission unit includes an outer housing, an internal motor housing disposed within the outer housing, and a venting system coupled to the outer housing to direct air through both the outer housing and the internal motor housing.

A vibratory device comprises a rotor and an eccentric weight. The eccentric weight is mounted to the shaft and has a center of mass that is offset from the shaft axis. The vibratory device is configured such that the eccentric weight is in a first rotational orientation relative to the shaft and rotates with the shaft when the shaft rotates in a first direction about the shaft axis and such that the eccentric weight is in a second rotational orientation relative to the shaft when the shaft rotates in an opposite second direction about the shaft axis. The vibratory device is further configured such that the eccentric weight automatically transitions from the first rotational orientation to the second rotational orientation when the shaft is switched from rotating in the first direction to rotating in the second direction.

In a cooled component system, a heat exchanger mounted on a surface of the industrial component is housed in an isolated access compartment adjacent to but separated from the primary compartment containing the industrial component. Housing the heat exchanger in a separately accessible compartment permits access to the heat exchanger for cleaning or other purposes without having to shut down the industrial component being cooled. A means for moving a cooling media over the surface a the heat exchanger might also be included to maximize heat exchange.

Process for the combined regeneration of at least two soluble salts contained in a residue of an industrial process comprising heavy metals, comprising: adding an amount of reactive aqueous solution needed to completely dissolve the salts which are desired to be regenerated to the residue; subjecting the resulting aqueous suspension to a separation to obtain an aqueous production solution on the one hand and insoluble impurities on the other hand, which are removed; successively subjected the aqueous production solution to at least two selective crystallization steps intended to crystallize, separately, the at least two soluble salts which are desired to be regenerated, which are washed, dried and regenerated separately; and adjusting the concentration of at least one of the soluble salts to be regenerated in the aqueous production solution, at the moment when such solution is subjected to the step of crystallization of this salt, to give rise to the selective crystallization of this salt, by addition of a controlled amount of this salt to the aqueous production solution upstream of the crystallization step.

The nation’s meat supply was declared ‘critical infrastructure’ by the White House Tuesday. The order detailed that ‘the closure of a single large beef processing facility can result in the loss of over 10 million individual servings of beef in a single day.’

Industrial Strength Samples has launched Pharmaceutical Movie Clips sample pack featuring a collection of vocal samples. The content provided has been sorted thru and does not contain any offensive samples that are directed to any one or any one group of people. It’s comical and pretty hardcore at the same time. Pharmaceutical Movie Clips offers […]

The post Industrial Strength releases Pharmaceutical Movie Clips sample pack appeared first on rekkerd.org.

The initial days of the Boeing experiment as 27,000 workers are asked to return won't be easy to assess, because a significant number of employees chose to stay home this week.

Finland's industrial production rose for the second straight month in March, figures from Statistics Finland showed on Friday.

Spain's industrial production declined at the fastest pace in nearly three years in March, data from the statistical office INE showed Friday.

Norway's industrial production grew at a faster pace in March, figures from Statistics Norway showed on Friday.

The heavy industrial area of Kwinana is home to Perth's only remaining beach shack community, but there are fears a new container port could destroy the simple lifestyle the locals have worked so hard to preserve.

A 59-year-old employee of the company that operates the Bootu Creek mine was killed when a wall of soil and dirt collapsed on him on Saturday afternoon, the Singapore-based parent company says.

We’ve been on hiatus during a busy academic year. Highlights of 2013-2014 in OSU Welding Engineering: More than 100 prospective students, alumni, and current students’ parents attended our March Welding Engineering Open House. Sixty new sophomore Welding Engineering majors were accepted in January, beginning their first major classes. We said “congrats” and “good-bye” to a […]