While EVs are cost-competitive in the long run, by 2025 they are also expected to be cost-effective in terms of upfront cost, vis-a-vis petrol/diesel vehicles.

The new Audi A6 is available with just a petrol engine under its hood. As before, this luxury sedan continues to compete with the likes of BMW 5 Series, Mercedes-Benz E-Class and the Jaguar XF.

The Audi Q8 now stands as the flagship SUV from the German automaker in India. It will find its place above the Q7 in the brand's product line-up. The competition will include the likes of Mercedes-Benz GLS and the BMW X7.

Top executives of Emirates and Etihad, two of the Middle East's biggest airlines, have said passenger demand may not return to pre-coronavirus crisis levels until 2023.

The coronavirus impact could render 3.8 crore people jobless, which is around 70 per cent of the total workforce in the tourism and hospitality sector, according to a grouping.

Making things worse is that some countries that are specifically hard-hit by the coronavirus are also heavily dependent on tourism, like Italy and Spain.

For the Federal Reserve, 2019 has started out looking a lot like 2016: The last time uncertainty over global growth roiled financial markets for months on end.

Ananth Narayan, professor-finance at SPJIMR, believes that while TLTRO 2.0 is welcome, it does not address the core issue.

To tackle the current crisis arisen from the COVID-19 outbreak and the consequent nationwide lockdown, the government and the RBI have announced many measures to ease the stress of businesses. 

ANCHORAGE WET POND PEDESTRIAN IMPROVEMENTS

BRANDYWINE SOUTH PEDESTRIAN AND TRAIL IMPROVEMENTS

The Players Coalition and dozens of professional athletes sent a letter to Attorney General William Barr and FBI Director Christopher Wray requesting an immediate federal investigation into the death of Ahmaud Arbery in Georgia.

Design and verification standards are critical if we want to get a new generation of Internet of Things (IoT) devices into the market, according to panelists at an Accellera Systems Initiative breakfast at the Design Automation Conference (DAC 2015) June 9. However, IoT devices for different vertical markets pose very different challenges and requirements, making the standards picture extremely complicated.

The panel was titled “Design and Verification Standards in the Era of IoT.” It was moderated by industry editor John Blyler, CEO of JB Systems Media and Technology. Panelists were as follows, shown left to right in the photo below:

• Lu Dai, director of engineering, Qualcomm
• Wael William Diab, senior director for strategy marketing, industry development and standardization, Huawei
• Chris Rowen, CTO, IP Group, Cadence Design Systems, Inc.

In opening remarks, Blyler recalled a conversation from the recent IEEE International Microwave Symposium in which a panelist pointed to the networking and application layers as the key problem areas for RF and wireless standardization. Similarly, in the IoT space, we need to look “higher up” at the systems level and consider both software and hardware development, Blyler said.

Rowen helped set some context for the discussion by noting three important points about IoT:

• IoT is not a product segment. Vertical product segments such as automotive, medical devices, and home automation all have very different characteristics.
• IoT “devices” are components within a hierarchy of systems that includes sensors, applications, user interface, gateway application (such as cell phone), and finally the cloud, where all data is aggregated.
• A bifurcation is taking place in design. We are going from extreme scale SoCs to “extreme fit” SoCs that are specialized, low energy, and very low cost.

Here are some of the questions and answers that were addressed during the panel discussion.

Q: The claim was recently made that given the level of interaction between sensors and gateways, 50X more verification nodes would have to be checked for IoT. What standards need to be enhanced or changed to accomplish that?

Rowen: That’s a huge number of design dimensions, and the way you attack a problem of that scale is by modularization. You define areas that are protected and encapsulated by standards, and you prove that individual elements will be compliant with that interface. We will see that many interesting problems will be in the software layers.

Q: Why is standardization so important for IoT?

Dai: A company that is trying to make a lot of chips has to deal with a variety of standards. If you have to deal with hundreds of standards, it’s a big bottleneck for bringing your products to market. If you have good standardization within the development process of the IC, that helps time to market.

When I first joined Qualcomm a few years ago, there was no internal verification methodology. When we had a new hire, it took months to ramp up on our internal methodology to become effective. Then came UVM [Universal Verification Methodology], and as UVM became standard, we reduced our ramp-up time tremendously. We’ve seen good engineers ramp up within days.

Diab: When we start to look at standards, we have to do a better job of understanding how they’re all going to play with each other. I don’t think one set of standards can solve the IoT problem. Some standards can grow vertically in markets like industrial, and other standards are getting more horizontal. Security is very important and is probably one thing that goes horizontally.

Requirements for verticals may be different, but processing capability, latency, bandwidth, and messaging capability are common [horizontal] concerns. I think a lot of standards organizations this year will work on horizontal slices [of IoT].

Q: IoT interoperability is important. Any suggestions for getting that done and moving forward?

Rowen: The interoperability problem is that many of these [IoT] devices are wireless. Wireless is interesting because it is really hard – it’s not like a USB plug. Wireless lacks the infrastructure that exists today around wired standards. If we do things in a heavily wireless way, there will be major barriers to overcome.

Dai: There are different standards for 4G LTE technology for different [geographical] markets. We have to make a chip that can work for 20 or 30 wireless technologies, and the cost for that is tremendous. The U.S., Europe, and China all have different tweaks. A good standard that works across the globe would reduce the cost a lot.

Q: If we’re talking about the need to define requirements, a good example to look at is power. Certainly you have UPF [Unified Power Format] for the chip, board, and module.

Rowen: There is certainly a big role for standards about power management. But there is also a domain in which we’re woefully under-equipped, and that is the ability to accurately model the different power usage scenarios at the applications level. Too often power devolves into something that runs over thousands of cycles to confirm that you can switch between power management levels successfully. That’s important, but it tells you very little about how much power your system is going to dissipate.

Dai: There are products that claim to be UPF compliant, but my biggest problem with my most recent chip was still with UPF. These tools are not necessarily 100% UPF compliant.

One other concern I have is that I cannot get one simulator to pass my Verilog code and then go to another that will pass. Even though we have a lot of tools, there is no certification process for a language standard.

Q: When we create a standard, does there need to be a companion compliance test?

Rowen: I think compliance is important. Compliance is being able to prove that you followed what you said you would follow. It also plays into functional safety requirements, where you need to prove you adhered to the flow.

Dai: When we [Qualcomm] sell our 4G chips, we have to go through a lot of certifications. It’s often a differentiating factor.

Q: For IoT you need power management and verification that includes analog. Comments?

Rowen: Small, cheap sensor nodes tend to be very analog-rich, lower scale in terms of digital content, and have lots of software. Part of understanding what’s different about standardization is built on understanding what’s different about the design process, and what does it mean to have a software-rich and analog-rich world.

Dai: Analog is important in this era of IoT. Analog needs to come into the standards community.

Richard Goering

Cadence Blog Posts About DAC 2015

Gary Smith at DAC 2015: How EDA Can Expand Into New Directions

DAC 2015: Google Smart Contact Lens Project Stretches Limits of IC Design

DAC 2015: Lip-Bu Tan, Cadence CEO, Sees Profound Changes in Semiconductors and EDA

DAC 2015: “Level of Compute in Vision Processing Extraordinary” – Chris Rowen

DAC 2015: Can We Build a Virtual Silicon Valley?

DAC 2015: Cadence Vision-Design Presentation Wins Best Paper Honors

Whitepaper called From Zero Credentials to Full Domain Compromise. This paper covers techniques penetration testers can use in order to accomplish an initial foothold on target networks and achieve full domain compromise without executing third party applications or reusing clear text credentials.

A flaw was found in Workspace Control that allows a local unprivileged user to retrieve the database or Relay server credentials from the Windows Registry. These credentials are encrypted, however the encryption that is used is reversible. This issue was successfully verified on Ivanti Workspace Control version 10.2.700.1 and 10.2.950.0.

Centreon version 19.10.5 suffers from a database credential disclosure vulnerability.

Many Cisco devices such as Cisco RV340, Cisco RV340W, Cisco RV345, Cisco RV345P, Cisco RV260, Cisco RV260P, Cisco RV260W, Cisco 160, and Cisco 160W suffer from having hard-coded credentials, known GNU glibc, known BusyBox, and IoT Inspector identified vulnerabilities.

Cisco DCNM JBoss version 10.4 suffers from a credential leakage vulnerability.

A git clone action can leak cached / stored credentials for github.com to example.com due to insecure handling of newlines in the credential helper protocol.

XBOX 360 Aurora version 0.6b default credential FTP bruteforcing script.

Avast Anti-Virus versions prior to 19.1.2360 suffer from a local credential disclosure vulnerability.

Sweden’s ambitious plan to drastically cut emissions from transport by bringing millions of electric cars onto the road could be derailed by a lack of power capacity for new charging stations in major cities.

These are halcyon days for fleet-footed crossover SUVs. Saucy ‘utes like the 2020 Mercedes-Benz GLC 43 AMG hardly look like they’re just as quick as their smaller siblings but stopwatches don’t lie. In the example above, Mercedes says the GLC43 crossover takes just 4.7 seconds from 0-60 mph compared to the C43 sedan’s time...

Review update: The 2020 Mercedes-Benz AMG GLC 43 SUV "nose" the right spice level These are halcyon days for fleet-footed crossover SUVs. Saucy ‘utes like the 2020 Mercedes-Benz GLC 43 AMG hardly look like they’re just as quick as their smaller siblings but stopwatches don’t lie. 5 things to know about Uconnect 5 Uconnect 5, the...

Many car buyers aspire to own a Mercedes-Benz. The cars are a symbol of quality, bulletproof German engineering, and, yes, status. But if you can’t get the lord to buy you a Mercedes-Benz, you have to do it yourself, and that can really stretch the budget. Mercedes answers that issue with its two lowest-priced cars, the A-Class and...

Almost ten years ago, Built Green, an environmentally-friendly residential building program of the Master Builders Association of King and Snohomish Counties, began a project to develop the first net energy townhome complex in the United States. The project was created to revolutionize green housing and prove that green building could be done affordably.

The world must invest $2.4 trillion in clean energy every year through 2035 and cut the use of coal-fired power to almost nothing by 2050 to avoid catastrophic damage from climate change, according to scientists convened by the United Nations.

Exxon Mobil Corp. will use renewable energy to produce oil in West Texas.

Among my circle of friends and colleagues, everyone is aware of the impact of human activities on climate change - the melting of arctic ice, the destruction of species - and the major causes of it, namely, coal burning for electricity and fossil fuels burning for transport. What nearly everyone is unclear about is what specifically to do about it and how fast.