This is the 22nd installment of The Rationalist, my column for the Times of India.

Trade wars are on the rise, and it’s enough to get any nationalist all het up and excited. Earlier this week, Narendra Modi’s government announced that it would start imposing tariffs on 28 US products starting today. This is a response to similar treatment towards us from the US.

There is one thing I would invite you to consider: Trump and Modi are not engaged in a war with each other. Instead, they are waging war on their own people.

Let’s unpack that a bit. Part of the reason Trump came to power is that he provided simple and wrong answers for people’s problems. He responded to the growing jobs crisis in middle America with two explanations: one, foreigners are coming and taking your jobs; two, your jobs are being shipped overseas.

Both explanations are wrong but intuitive, and they worked for Trump. (He is stupid enough that he probably did not create these narratives for votes but actually believes them.) The first of those leads to the demonising of immigrants. The second leads to a demonising of trade. Trump has acted on his rhetoric after becoming president, and a modern US version of our old ‘Indira is India’ slogan might well be, “Trump is Tariff. Tariff is Trump.”

Contrary to the fulminations of the economically illiterate, all tariffs are bad, without exception. Let me illustrate this with an example. Say there is a fictional product called Brump. A local Brump costs Rs 100. Foreign manufacturers appear and offer better Brumps at a cheaper price, say Rs 90. Consumers shift to foreign Brumps.

Manufacturers of local Brumps get angry, and form an interest group. They lobby the government – or bribe it with campaign contributions – to impose a tariff on import of Brumps. The government puts a 20-rupee tariff. The foreign Brumps now cost Rs 110, and people start buying local Brumps again. This is a good thing, right? Local businesses have been helped, and local jobs have been saved.

But this is only the seen effect. The unseen effect of this tariff is that millions of Brump buyers would have saved Rs 10-per-Brump if there were no tariffs. This money would have gone out into the economy, been part of new demand, generated more jobs. Everyone would have been better off, and the overall standard of living would have been higher.

That brings to me to an essential truth about tariffs. Every tariff is a tax on your own people. And every intervention in markets amounts to a distribution of wealth from the people at large to specific interest groups. (In other words, from the poor to the rich.) The costs of this are dispersed and invisible – what is Rs 10 to any of us? – and the benefits are large and worth fighting for: Local manufacturers of Brumps can make crores extra. Much modern politics amounts to manufacturers of Brumps buying politicians to redistribute money from us to them.

There are second-order effects of protectionism as well. When the US imposes tariffs on other countries, those countries may respond by imposing tariffs back. Raw materials for many goods made locally are imported, and as these become expensive, so do those goods. That quintessential American product, the iPhone, uses parts from 43 countries. As local products rise in price because of expensive foreign parts, prices rise, demand goes down, jobs are lost, and everyone is worse off.

Trump keeps talking about how he wants to ‘win’ at trade, but trade is not a zero-sum game. The most misunderstood term in our times is probably ‘trade-deficit’. A country has a trade deficit when it imports more than what it exports, and Trump thinks of that as a bad thing. It is not. I run a trade deficit with my domestic help and my local grocery store. I buy more from them than they do from me. That is fine, because we all benefit. It is a win-win game.

Similarly, trade between countries is really trade between the people of both countries – and people trade with each other because they are both better off. To interfere in that process is to reduce the value created in their lives. It is immoral. To modify a slogan often identified with libertarians like me, ‘Tariffs are Theft.’

These trade wars, thus, carry a touch of the absurd. Any leader who imposes tariffs is imposing a tax on his own people. Just see the chain of events: Trump taxes the American people. In retaliation, Modi taxes the Indian people. Trump raises taxes. Modi raises taxes. Nationalists in both countries cheer. Interests groups in both countries laugh their way to the bank.

What kind of idiocy is this? How long will this lose-lose game continue?

© 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic

hi all, 

          what wrong with the error "param_write.log does not exist" when i export parameters in allegro 16.6 pcb board.

          someone can provide suggestions, thanks.

best regards.

For a netlist vs. netlist LEC flow we have to solve the following problem:

- in the RTL code we replicate a large array of N x M all-identical hard-macros, let call them MACRO_A

- MACRO_A is pre-assembled in Innovus and contains digital parts and analog parts (bottom-up hierarchical flow)

- at top-level (full-chip) we instantiate this array of all-identical macros

- in the top-level place-and-route flow we perform ecoChangeCell to remaster the top row of this array with MACRO_B

- MACRO_B is just a copy of the original MACRO_A cell containing same pins position, same internal digital functionality and also same digital layout, only slight differences in one analog block inside the macro

- MACRO_A and MACRO_B have the same .lib file generated with the do_extract_model command at the end of the Innovus flow, they only differ in the name of the macro

- when performing post-synthesis netlist vs post-place-and-route we load .lib files of both macros in Conformal LEC

- the LEC flow fails because Conformal LEC sees only MACRO_A instantiated in the post-synthesis netlist and both MACRO_A and MACRO_B in the post-palce-and-route netlist

Since both digital functionality and STD cells layout are the same between MACRO_A and MACRO_B we don't want to keep track of this difference already at RTL stage, we just want to perform this ECO change in place-and-route and force Conformal to assume equivalence between MACRO_A and MACRO_B .

Basically what I'm searching for is something similar to the add_instance_equivalences Conformal command but that works between Golden and Revised designs on cell primitives/black-boxes .

Is this flow supported ?

Thanks in advance

Luca

The following is valid SystemVerilog:

module mmio
#(parameter PORTS=2,
parameter ADDR_WIDTH=30)
(input logic[ADDR_WIDTH-1:0] addr[PORTS],
output logic ben[PORTS], // Bus enable
output logic men[PORTS]); // Memory enable

always_comb begin
for(int i = 0; i < PORTS; i++) begin
ben[i] = addr[i] >= 'h20080004 && addr[i] < 'h200c0000;
men[i] = ~ben[i];
end
end

endmodule : mmio

And if you instantiate it:

mmio #(1, 30) MMIO(.addr('{scalar_addr}),
.ben('{ben}),
.men('{men}));

Genus returns an error: "Could not synthesize non-constant range values. [CDFG-231] [elaborate]" Is this just not possible in Genus or could it be caused by something else?

Hi All, Here's another great new feature that I've found very helpful... Broadband SPICE is a new tool for S-parameter simulation in Spectre RF. In the MMSIM13.1.1 ( MMSIM13.1 USR1) release (now available on http://downloads.cadence.com), a...(read more)

Last year, I wrote a blog post entitled Modeling Oscillators with Arbitrary Phase Noise Profiles . We now have an easier way to do this. Starting in MMSIM 13.1 , you can specify the phase noise as an instance parameter in Spectre sources, including...(read more)

Hello Spectre Users, Simulating S-parameters in a time domain (transient, periodic steady state) simulator has been and continues to be a challenge for many analog and RF designers. I'm often asked: What is required in order to achieve accurate...(read more)

Hi All, If you were unable to attend IMS 2017 in June 2017, the IMS MicroApp “7 Habits of Highly Successful S-Parameters” is on our Cadence website. On Cadence Online Support , the in-depth AppNote is here: 20466646 . Best regards, Tawna...(read more)

Large-signal S-parameters (LSSPs) are an extension of small-signal S-parameters and are defined as the ratio of reflected (or transmitted) waves to incident waves. (read more)

Hi,

I have a test session object that I am getting like this:

maeTstSession=maeGetTestSession(test ?session session)

Is it possible to get the test name from this object? I am asking because this object passed to several levels of functions and I don't want to pass an additional argument with the test name

Hi all,

I want to write a script SKILL to create the title & frame for view schematic. My question is whether SKILL supports any function for me to do this.

Best regards,

Huy Hoang

Cadence continues to be a leader in SoC verification and has expanded our industry investment in Accellera portable stimulus language standardization. Some customers have expressed reservations that portable stimulus requires the effort of learn...(read more)

Hi all,

I have a question regarding the manufacture : how to check a cluster of same net vias spacing, with have no shape or cline covered

What is a Power Distribution Network (PDN) after all but resistance, inductance, and capacitance in the PCB and components? And, of course, it is there to deliver the right current and voltage to each component on your PCB. But is that all? Are there oth...(read more)

Hello, i need to test the  parameter Kf under some conditions in subthreshold.i cannot just plot the OP param,becasue i need to derive it under certain conditions.

Spectre(of Cadence) like BSIM(of Berkley) has developed a method for deriving each parameter in their model.

Is there a way to help me with such manual where i can test in cadence virtuoso the Kf parameter shown in the formula bellow?

Thanks.

This is the 22nd installment of The Rationalist, my column for the Times of India.

Trade wars are on the rise, and it’s enough to get any nationalist all het up and excited. Earlier this week, Narendra Modi’s government announced that it would start imposing tariffs on 28 US products starting today. This is a response to similar treatment towards us from the US.

There is one thing I would invite you to consider: Trump and Modi are not engaged in a war with each other. Instead, they are waging war on their own people.

Let’s unpack that a bit. Part of the reason Trump came to power is that he provided simple and wrong answers for people’s problems. He responded to the growing jobs crisis in middle America with two explanations: one, foreigners are coming and taking your jobs; two, your jobs are being shipped overseas.

Both explanations are wrong but intuitive, and they worked for Trump. (He is stupid enough that he probably did not create these narratives for votes but actually believes them.) The first of those leads to the demonising of immigrants. The second leads to a demonising of trade. Trump has acted on his rhetoric after becoming president, and a modern US version of our old ‘Indira is India’ slogan might well be, “Trump is Tariff. Tariff is Trump.”

Contrary to the fulminations of the economically illiterate, all tariffs are bad, without exception. Let me illustrate this with an example. Say there is a fictional product called Brump. A local Brump costs Rs 100. Foreign manufacturers appear and offer better Brumps at a cheaper price, say Rs 90. Consumers shift to foreign Brumps.

Manufacturers of local Brumps get angry, and form an interest group. They lobby the government – or bribe it with campaign contributions – to impose a tariff on import of Brumps. The government puts a 20-rupee tariff. The foreign Brumps now cost Rs 110, and people start buying local Brumps again. This is a good thing, right? Local businesses have been helped, and local jobs have been saved.

But this is only the seen effect. The unseen effect of this tariff is that millions of Brump buyers would have saved Rs 10-per-Brump if there were no tariffs. This money would have gone out into the economy, been part of new demand, generated more jobs. Everyone would have been better off, and the overall standard of living would have been higher.

That brings to me to an essential truth about tariffs. Every tariff is a tax on your own people. And every intervention in markets amounts to a distribution of wealth from the people at large to specific interest groups. (In other words, from the poor to the rich.) The costs of this are dispersed and invisible – what is Rs 10 to any of us? – and the benefits are large and worth fighting for: Local manufacturers of Brumps can make crores extra. Much modern politics amounts to manufacturers of Brumps buying politicians to redistribute money from us to them.

There are second-order effects of protectionism as well. When the US imposes tariffs on other countries, those countries may respond by imposing tariffs back. Raw materials for many goods made locally are imported, and as these become expensive, so do those goods. That quintessential American product, the iPhone, uses parts from 43 countries. As local products rise in price because of expensive foreign parts, prices rise, demand goes down, jobs are lost, and everyone is worse off.

Trump keeps talking about how he wants to ‘win’ at trade, but trade is not a zero-sum game. The most misunderstood term in our times is probably ‘trade-deficit’. A country has a trade deficit when it imports more than what it exports, and Trump thinks of that as a bad thing. It is not. I run a trade deficit with my domestic help and my local grocery store. I buy more from them than they do from me. That is fine, because we all benefit. It is a win-win game.

Similarly, trade between countries is really trade between the people of both countries – and people trade with each other because they are both better off. To interfere in that process is to reduce the value created in their lives. It is immoral. To modify a slogan often identified with libertarians like me, ‘Tariffs are Theft.’

These trade wars, thus, carry a touch of the absurd. Any leader who imposes tariffs is imposing a tax on his own people. Just see the chain of events: Trump taxes the American people. In retaliation, Modi taxes the Indian people. Trump raises taxes. Modi raises taxes. Nationalists in both countries cheer. Interests groups in both countries laugh their way to the bank.

What kind of idiocy is this? How long will this lose-lose game continue?

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

Is there a setting for automatically naming nets from port names in a hierarchical design? That is, when creating a netlist for Allegro in Capture.

Hi all,

I am using ADE assembler.

I ran transient simulation and swept the input frequency (Fin) of the circuit. And I use Spectrum Measurement to return a value of the fundamental tone magnitude (Sig_fund) for each sweep point. 

Previously, I use "plot across design points" to plot both "Fin" and "Sig_fund", and then use "Y vs Y" to get a waveform of Sig_fund vs Fin. Measure the 1dB Bandwidth with markers. 

Can I realized above measurement with an expression in "output setup" ? And how?

I know to set the "Eval type" to "sweep" to process the data across sweep points. But here, it has to return an interpolated value from "Fin" with a criteria "(value(calcVal("Sig_fund"  0) - 1)". I am not sure whether it can be done in ADE assembler.

Thanks and regards,

Yutao

Hello,

I am using Virtuoso 6.1.7.

I am performing the parasitic extraction of a MOM cap array of 32 caps. I use Quantus QRC and I enable field solver. I select “QRCFS” for field solver type and “High” for field solver accuracy. The unit MOM cap is horizontally and vertically symmetric. The array looks like the sketch below and there are no other structures except the unit caps:

Rationally speaking, the capacitance values of the unit caps should be symmetric with respect to a vertical symmetry axis that is between cap16 and cap17 (shown with dashed red line). For example,

the capacitance of cap1 should be equal to the capacitance of cap32

the capacitance of cap2 should be equal to the capacitance of cap31

etc. as there are no other structures around the caps that might create some asymmetry.

Nevertheless, what I observe is the following after the parasitic extraction:

As it can be seen, the result is not symmetric contrary to what is expected. I should also add that I do not observe this when I perform parasitic extraction with no filed solver.

Why do I get this result? Is it an artifact resulting from the field solver tool (my conclusion was yes but still it must be verified)? If not, how can something like this happen?

Many thanks in advance.

Best regards,

Can

Before I ask this, I am aware that I can output an s-parameter file from an SP analysis.

I'm wondering if there is a simple way of creating an s-parameter model of a component.

As an example, if I have an S-parameter model that has 200 ports and 150 of those ports are to be connected to passive components and the remaining 50 ports are to be connected to active components, I can simplify the model by connecting the 150 passive components, running an SP analysis, and generating a 50 port S-parameter file.

The problem is that this is cumbersome. You've got to wire up 50 PORT components and then after generating the s50p file, create a new cellview with an nport component and connect the 50 ports with 50 new pins.

Wiring up all of those port components takes quite a lot of time to do, especially as the "choosing analyses" form adds arrays in reverse (e.g. if you click on an array of PORT components called X<0:2> it will add X<2>, X<1>, X<0> instead of in ascending order) so you have to add all of them to the analyses form manually.

Is any way of taking a schematic and running some magic "generate S-Parameter cellview from schematic cellview"  function that automates the whole process?

દુનિયામાં Coronavirusની રસી શોધવાની રેસ, America પરીક્ષણનાં અંતિમ તબક્કામાં

Coronavirus સામે America ની હાલત કફોડી, Trump એ China પર લગાવ્યા આરોપ

visit News18 Urdu for latest news, breaking news, news headlines and updates from Tamenglong on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from East Kameng Seppa on politics, sports, entertainment, cricket, crime and more.

The TRENDnet UltraCam ActiveX Control UltraCamX.ocx suffers from a stack buffer overflow vulnerability when parsing large amount of bytes to several functions in UltraCamLib, resulting in memory corruption overwriting several registers including the SEH. An attacker can gain access to the system of the affected node and execute arbitrary code. Versions TV-IP422WN and TV-IP422W are affected.

The UltraHVCam ActiveX Control 'UltraHVCamX.ocx' suffers from a stack buffer overflow vulnerability when parsing large amount of bytes to several functions in UltraHVCamLib, resulting in memory corruption overwriting several registers including the SEH. An attacker can gain access to the system of the affected node and execute arbitrary code. Versions affected include PT Type ICS2330, Cube Type ICS2030, and Dome Type ICS7522.

The UltraSVCam ActiveX Control 'UltraSVCamX.ocx' suffers from a stack buffer overflow vulnerability when parsing large amount of bytes to several functions in UltraSVCamLib, resulting in memory corruption overwriting several registers including the SEH. An attacker can gain access to the system of the affected node and execute arbitrary code. Versions affected include Bullet Type ICL5132 and Bullet Type ICL5452.

This Metasploit module exploits a vulnerability that exists due to a lack of input validation when creating a user. Messages for a given user are stored in a directory partially defined by the username. By creating a user with a directory traversal payload as the username, commands can be written to a given directory. To use this module with the cron exploitation method, run the exploit using the given payload, host, and port. After running the exploit, the payload will be executed within 60 seconds. Due to differences in how cron may run in certain Linux operating systems such as Ubuntu, it may be preferable to set the target to Bash Completion as the cron method may not work. If the target is set to Bash completion, start a listener using the given payload, host, and port before running the exploit. After running the exploit, the payload will be executed when a user logs into the system. For this exploitation method, bash completion must be enabled to gain code execution. This exploitation method will leave an Apache James mail object artifact in the /etc/bash_completion.d directory and the malicious user account.

Amcrest Dahua NVR Camera IP2M-841 denial of service proof of concept exploit.

In the macOS kernel, the XNU function wait_for_namespace_event() in bsd/vfs/vfs_syscalls.c releases a file descriptor for use by userspace but may then subsequently destroy that file descriptor using fp_free(), which unconditionally frees the fileproc and fileglob. This opens up a race window during which the process could manipulate those objects while they're being freed. Exploitation requires root privileges.

•Dassault Systèmes becomes the first and only software provider today to be recognized as Groupe PSA’s preferred digital partner •Dassault Systèmes and Groupe PSA engage in long-term strategy with the intent to further deploy the 3DEXPERIENCE platform •New level of partnership will enable Groupe PSA to improve efficiency and innovation in challenging marketplace