En este episodio, La Luciérnaga se enciende para revisar lo que significa el nombramiento de Iván Velásquez como el próximo ministro de Defensa de Colombia. También, les contamos qué cosas podría incluir la reforma tributaria del gobierno entrante. Además, las cifras de empleo formal crecen en la capital del Atlántico.La Luciérnaga, un espacio de humor, análisis y opinión de Caracol Radio que acompaña desde hace 30 años a sus oyentes en el regreso a casa.

Millonarios, luego analizar detalladamente sus alternativas, ya tiene lista una oferta formal por Falcao García, así lo informó Juan Felipe Cadavid, periodista de Caracol Radio. El equipo se pondrá en contacto con el jugador en las próximas horas.

10 September 2020

Informal Seminar: Human resources policies - Invitation for all Permanent Representatives

 Friday, 12 October 2018 - 15.00 to 17.30 (Green Room)

The president atoned for the federal government's role in forcing Native American children into boarding schools, where many were abused and more than 900 died

Attorney General Kathy Jennings announced Tuesday that the Department of Justice has secured the indictment of Randon Wilkerson for the murder of Cpl. Keith Heacook of the Delmar Police Department. Wilkerson will face two counts of Murder First Degree, two counts of Possession of a Deadly Weapon During the Commission of a Felony, and 11 […]

WILMINGTON, Del. – Governor John Carney on Friday formally extended the Public Health Emergency order another 30 days to allow the State of Delaware and medical providers to continue COVID-19 vaccination and testing programs, and issued the following statement:    “It’s important that we continue to stay one step ahead of COVID-19,” said Governor Carney. “Keep doing the things we […]

WILMINGTON, Del. – Governor Carney on Friday formally extended the Public Health Emergency order another 30 days to allow the State of Delaware and medical providers to continue COVID-19 vaccination and testing programs, and issued the following statement:    “It’s important that we continue to stay one step ahead of COVID-19,” said Governor Carney. “Keep doing the things we know […]

WILMINGTON, Del. – Governor Carney on Thursday formally extended the Public Health Emergency order another 30 days to allow the State of Delaware and medical providers to continue COVID-19 vaccination and testing programs. Under Delaware law, Public Health Emergency declarations must be renewed every 30 days. Visit Governor Carney’s website to view the Public Health Emergency […]

WILMINGTON, Del. – Governor Carney on Thursday formally extended the Public Health Emergency order another 30 days to allow the State of Delaware and medical providers to continue COVID-19 vaccination and testing programs.   “It’s important that we keep doing the things we know that work,” said Governor Carney. “Stay home if you’re sick and get tested. Get vaccinated and […]

WILMINGTON, Del. – Governor Carney on Thursday formally extended the Public Health Emergency order another 30 days to allow the State of Delaware and medical providers to continue COVID-19 vaccination and testing programs.   “As we enter the holiday season, it’s important that we keep doing the things we know that work,” said Governor Carney. “Stay home if you’re sick. Get vaccinated […]

WILMINGTON, Del. – Governor Carney on Friday formally extended the Public Health Emergency order another 30 days to allow the State of Delaware and medical providers to continue COVID-19 vaccination and testing programs. “Let’s keep doing the things we know that work,” said Governor Carney. “Stay home if you’re sick. Get vaccinated and boosted when you’re eligible. And get your flu shot […]

The Delaware Marijuana Control Act, 4Del. C. Chapter 13 legalized the use of recreational marijuana for individuals 21 and older. The newly created OMC has the responsibility to adopt rules and regulations necessary for the implementation of this law.

The Office of the Marijuana Commissioner (OMC) has released additional sections of the informal draft regulations for review. The sections of draft regulations released today include the sections related to tracking, product health standards, packaging and labeling requirements, and advertising. The Informal Comment Period on the OMC website omc.delaware.gov will close on March 29, 2024. […]

The Office of the Marijuana Commissioner (OMC) has released additional sections of the informal draft regulations for review. The sections of draft regulations released today include the sections related to testing, sampling, waste, disposal, appeals, variances, and fee schedules. The Informal Comment Period on the OMC website omc.delaware.gov will close on March 29, 2024. Once this informal […]

Hi Cadence & forumers, 

I am running a conformal LEC with a flattened netlist against RTL. 

The run hang for 5 days at the "analyze abort" step which is automatically launched by the compare. 

The netlist is flattened at some levels so hierarchical flow which I tried didn't help much. The flattened/highly optimized netlist is from customer and the ultimate goal. How shall I proceed now? 

On the a side note, a test run with a hierarchical netlist from a simple DC "compile -map_effort medium" command finished after 1 day or so. 

Thank you! 

// Command: vpx compare -verbose -ABORT_Print -NONEQ_Print -TIMEstamp
// Starting multithreaded comparison ...
Comparing 241112 points in parallel.

// Multithreading Overhead: 38% Gates: 8501606/6168138
// Multithreaded processing completed.
================================================================================
Compared points PO DFF DLAT BBOX CUT Total
--------------------------------------------------------------------------------
Equivalent 1025 241638 30 75 21 242789
--------------------------------------------------------------------------------
Abort 0 124 0 0 0 124
================================================================================
Compare results of instance/output/pin equivalences and/or sequential merge
================================================================================
Compared points DFF Total
--------------------------------------------------------------------------------
Equivalent 204 204
================================================================================
// Warning: 512 DFFs/DLATs have 1 disabled clock port: skipped data cone comparison
// Resolving aborts by analyze abort...

Below is showing my Master.v

********************************************************************************************************************************************************************************************************************

///////ALU
module ALU (
    input [31:0] A,B,
    input[3:0] alu_control,
    output reg [31:0] alu_result,
    output reg zero_flag
);
    always @(*)
    begin
        // Operating based on control input
        case(alu_control)

        4'b0001: alu_result = A+B;
        4'b0010: alu_result = A-B;
        4'b0011: alu_result = A*B;
        4'b0100: alu_result = A|B;
        4'b0101: alu_result = A&B;
        4'b0110: alu_result = A^B;
        4'b0111: alu_result = ~B;
        4'b1000: alu_result = A<<B;
        4'b1001: alu_result = A>>B;
        4'b1010: begin
            if(A<B)
            alu_result = 1;
            else
            alu_result = 0;
        end
        default: alu_result = A+B;

        endcase

        // Setting Zero_flag if ALU_result is zero
        if (alu_result)
            zero_flag = 1'b1;
        else
            zero_flag = 1'b0;   
    end
endmodule


/////CONTROL UNIT
/*
Control unit controls takes opcode, funct7, funct3 of the instruction code to determine
and control regwrite in IFU, alu control in ALU to execute proper instruction
*/
/*
Control unit controls takes opcode, funct7, funct3 of the instruction code to determine
and control regwrite in IFU, alu control in ALU to execute proper instruction
*/
module CONTROL(
    input [4:0] opcode,
    output reg [3:0] alu_control,
    output reg regwrite_control,memread_control,memwrite_control
);
    always @(opcode)
    begin
       case(opcode)
        5'b00001: begin alu_control=4'b0001;  //add
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00010: begin alu_control=4'b0010;  ///sub
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00011: begin alu_control=4'b0011;  //mul
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00100: begin alu_control=4'b0100;  ///OR
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00101: begin alu_control=4'b0101;  ///AND
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00110: begin alu_control=4'b0110;  ///XOR
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00111: begin alu_control=4'b0111;  ///NOT
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b01000: begin alu_control=4'b1000;  //SL
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        5'b11001: begin alu_control=4'b1001;  //SR
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        5'b01010: begin alu_control=4'b1010;  //COMPARE
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        //5'b11010: begin ALU_control=4'b0000;  //SW
        //regwrite_control=1; memread_control=0; memwrite_control=0;
        //end
        //5'b01010: begin ALU_control=4'bxxxx;  //LW
        //regwrite_control=0; memread_control=0; memwrite_control=1;
        //end
        default : begin alu_control = 4'b0001;
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        endcase  
    end
endmodule



//////DATA MEMORY
module Data_Mem(
input clock, rd_mem_enable, wr_mem_enable,
input [11:0] address,
input [31:0] datawrite_to_mem,
output reg [31:0] dataread_from_mem );

reg [31:0] Data_Memory[8:0];

initial begin
    Data_Memory[0] = 32'hFFFFFFFF;
    Data_Memory[1] = 32'h00000001;
    Data_Memory[2] = 32'h00000005;
    Data_Memory[3] = 32'h00000003;
    Data_Memory[4] = 32'h00000004;
    Data_Memory[5] = 32'h00000000;
    Data_Memory[6] = 32'hFFFFFFFF;
    Data_Memory[7] = 32'h00000000;
    //Data_Memory[8] = 32'h00000008;
    //Data_Memory[9] = 32'h00000009;
    //Data_Memory[10] = 32'h0000000A;
    //Data_Memory[11] = 32'h0000000B;
    //Data_Memory[12] = 32'h0000000C;
    //Data_Memory[13] = 32'h0000000D;
    //Data_Memory[14] = 32'h0000000E;
    //Data_Memory[15] = 32'h0000000F;
    //Data_Memory[16] = 32'h00000010;
    //Data_Memory[17] = 32'h00000011;
    //Data_Memory[18] = 32'h00000012;
    //Data_Memory[19] = 32'h00000013;
    //Data_Memory[20] = 32'h00000014;
    //Data_Memory[21] = 32'h00000015;
    //Data_Memory[22] = 32'h00000016;
    //Data_Memory[23] = 32'h00000017;
    //Data_Memory[24] = 32'h00000018;
    //Data_Memory[25] = 32'h00000019;
    //Data_Memory[26] = 32'h0000001A;
    //Data_Memory[27] = 32'h0000001B;
    //Data_Memory[28] = 32'h0000001C;
    //Data_Memory[29] = 32'h0000001D;
    //Data_Memory[30] = 32'h0000001E;
    Data_Memory[31] = 32'h0000001F;
       
    end
    always@(posedge clock) begin
       if(wr_mem_enable) begin
            Data_Memory[address] <= datawrite_to_mem;
       end
       else if(rd_mem_enable) begin
               dataread_from_mem <= Data_Memory[address];
       end
       else begin
               dataread_from_mem <= 32'h00000000;
       end
    end
endmodule   



/////INST MEM
/*

*/
module INST_MEM(
    input [31:0] PC,
    input reset,
    output [31:0] Instruction_Code
);
    reg [7:0] Memory [43:0]; // Byte addressable memory with 32 locations

    
    assign Instruction_Code = {Memory[PC+3],Memory[PC+2],Memory[PC+1],Memory[PC]};

    
    
    initial begin
            // Setting 32-bit instruction: add t1, s0,s1 => 0x00940333
            Memory[3] = 8'b0000_0000;
            Memory[2] = 8'b0000_0001;
            Memory[1] = 8'b0111_1100;
            Memory[0] = 8'b0000_0001;
            // Setting 32-bit instruction: sub t2, s2, s3 => 0x413903b3
            Memory[7] = 8'b0000_0000;
            Memory[6] = 8'b0000_0110;
            Memory[5] = 8'b1000_1111;
            Memory[4] = 8'b1110_0010;
            // Setting 32-bit instruction: mul t0, s4, s5 => 0x035a02b3
            Memory[11] = 8'b0000_0000;
            Memory[10] = 8'b0000_0101;
            Memory[9] = 8'b0111_1100;
            Memory[8] = 8'b0000_0011;
            // Setting 32-bit instruction: or t3, s6, s7 => 0x017b4e33
            Memory[15] = 8'b1111_1111;
            Memory[14] = 8'b1111_0100;
            Memory[13] = 8'b1010_0000;
            Memory[12] = 8'b1010_0100;
            // Setting 32-bit instruction: and
            Memory[19] = 8'b0000_0000;
            Memory[18] = 8'b0010_1001;
            Memory[17] = 8'b0001_1101;
            Memory[16] = 8'b0010_0101;
            // Setting 32-bit instruction: xor
            Memory[23] = 8'b0000_0000;
            Memory[22] = 8'b0001_1000;
            Memory[21] = 8'b0000_1101;
            Memory[20] = 8'b0110_0110;
            // Setting 32-bit instruction: not
            Memory[27] = 8'b0000_0000;
            Memory[26] = 8'b0010_1001;
            Memory[25] = 8'b0011_1101;
            Memory[24] = 8'b1100_0111;
            // Setting 32-bit instruction: shift left
            Memory[31] = 8'b0000_0000;
            Memory[30] = 8'b0101_0111;
            Memory[29] = 8'b1100_0110;
            Memory[28] = 8'b0000_1000;
            // Setting 32-bit instruction: shift right
            Memory[35] = 8'b0000_0000;
            Memory[34] = 8'b0110_1010;
            Memory[33] = 8'b1101_0010;
            Memory[32] = 8'b0111_1001;
            /// Setting 32-bit instruction: Campare
            Memory[39] = 8'b0000_0000;
            Memory[38] = 8'b0111_1010;
            Memory[37] = 8'b1101_0010;
            Memory[36] = 8'b0110_1010;
            /// Setting 32-bit instruction:
            Memory[43] = 8'b0000_0000;
            Memory[42] = 8'b0111_0111;
            Memory[41] = 8'b1101_0010;
            Memory[40] = 8'b0111_0010;
        end
   

endmodule

//IFU
/*
The instruction fetch unit has clock and reset pins as input and 32-bit instruction code as output.
Internally the block has Instruction Memory, Program Counter(P.C) and an adder to increment counter by 4,
on every positive clock edge.
*/
module IFU(
    input clock,reset,
    output [31:0] Instruction_Code
);
reg [31:0] PC = 32'b0;  // 32-bit program counter is initialized to zero

    
    always @(posedge clock, posedge reset)
    begin
        if(reset == 1)  //If reset is one, clear the program counter
        PC <= 0;
        else
        PC <= PC+4;   // Increment program counter on positive clock edge
    end
    // Initializing the instruction memory block
    INST_MEM instr_mem(.PC(PC),.reset(reset),.Instruction_Code(Instruction_Code));

endmodule


///MUX

module Mux_2X1 (
    input mem_rd_select, // rd_mem_enable
    input wire [31:0] dataread_from_mem, regdata2,

    output reg [31:0] mux_out
);

always @(mem_rd_select or dataread_from_mem or regdata2) begin
    if (mem_rd_select == 1)
        mux_out <= dataread_from_mem ;
    else
        mux_out <= regdata2;
    end
endmodule

//DFlipFlop
module DFlipFlop(D,clock,Q);
input D; // Data input
input clock; // clock input
output reg Q; // output Q
always @(posedge clock)
begin
 Q <= D;
end
endmodule

///DATA path


module DATAPATH(
    input [4:0]Read_reg_add1,
    input [4:0]Read_reg_add2,
    input [4:0]Reg_write_add,
    input [3:0]Alu_control,
    input [11:0]Address,
    input Wr_reg_enable,Wr_mem_enable,Rd_mem_enable,
    input clock,
    input reset,
    output OUTPUT
    );

    // Declaring internal wires that carry data
    wire zero_flag;
    wire [31:0]Dataread_from_mem;
    wire [31:0]read_data1;
    wire [31:0]read_data2;
    wire [31:0]Mux_out;
    wire [31:0]Alu_result;
    //wire [31:0]datawrite_to_reg;

    // Instantiating the register file
    REG_FILE reg_file_module(.reg_read_add1(Read_reg_add1),.reg_read_add2(Read_reg_add2),.reg_write_add(Reg_write_add),.datawrite_to_reg(Alu_result),.read_data1(read_data1),.read_data2(read_data2),.wr_reg_enable(Wr_reg_enable),.clock(clock),.reset(reset));

    // Instanting ALU
    ALU alu_module(.A(read_data1), .B(Mux_out), .alu_control(Alu_control), .alu_result(Alu_result), .zero_flag(zero_flag));
    
    //Mux
    Mux_2X1 mux(.mem_rd_select(Rd_mem_enable),.dataread_from_mem(Dataread_from_mem),.regdata2(read_data2),.mux_out(Mux_out));

    //Data Memory
    Data_Mem DM(.clock(clock),.rd_mem_enable(Rd_mem_enable),.wr_mem_enable(Wr_mem_enable),.address(Address),.datawrite_to_mem(Alu_result),.dataread_from_mem(Dataread_from_mem));
    
    // Dflipflop
    DFlipFlop DF (.D(zero_flag), .Q(OUTPUT),.clock(clock));
endmodule


/*
A register file can read two registers and write in to one register.
The RISC V register file contains total of 32 registers each of size 32-bit.
Hence 5-bits are used to specify the register numbers that are to be read or written.
*/

/*
Register Read: Register file always outputs the contents of the register corresponding to read register numbers specified.
Reading a register is not dependent on any other signals.

Register Write: Register writes are controlled by a control signal RegWrite.  
Additionally the register file has a clock signal.
The write should happen if RegWrite signal is made 1 and if there is positive edge of clock.
*/
module REG_FILE(
    input [4:0] reg_read_add1,
    input [4:0] reg_read_add2,
    input [4:0] reg_write_add,
    input [31:0] datawrite_to_reg,
    output [31:0] read_data1,
    output [31:0] read_data2,
    input wr_reg_enable,
    input clock,
    input reset
);

    reg [31:0] reg_memory [31:0]; // 32 memory locations each 32 bits wide
    
    initial begin
        reg_memory[0] = 32'h00000000;
        reg_memory[1] = 32'hFFFFFFFF;
        reg_memory[2] = 32'h00000002;
        reg_memory[3] = 32'hFFFFFFFF;
        reg_memory[4] = 32'h00000004;
        reg_memory[5] = 32'h01010101;
        reg_memory[6] = 32'h00000006;
        reg_memory[7] = 32'h00000000;
        reg_memory[8] = 32'h10101010;
        reg_memory[9] = 32'h00000009;
        reg_memory[10] = 32'h0000000A;
        reg_memory[11] = 32'h0000000B;
        reg_memory[12] = 32'h0000000C;
        reg_memory[13] = 32'h0000000D;
        reg_memory[14] = 32'h0000000E;
        reg_memory[15] = 32'h0000000F;
        reg_memory[16] = 32'h00000010;
        reg_memory[17] = 32'h00000011;
        reg_memory[18] = 32'h00000012;
        reg_memory[19] = 32'h00000013;
        reg_memory[20] = 32'h00000014;
        reg_memory[21] = 32'h00000015;
        //reg_memory[22] = 32'h00000016;
        //reg_memory[23] = 32'h00000017;
        //reg_memory[24] = 32'h00000018;
        //reg_memory[25] = 32'h00000019;
        //reg_memory[26] = 32'h0000001A;
        //reg_memory[27] = 32'h0000001B;
        //reg_memory[28] = 32'h0000001C;
        //reg_memory[29] = 32'h0000001D;
        //reg_memory[30] = 32'h0000001E;
        reg_memory[31] = 32'hFFFFFFFF;
    end

    // The register file will always output the vaules corresponding to read register numbers
    // It is independent of any other signal
    assign read_data1 = reg_memory[reg_read_add1];
    assign read_data2 = reg_memory[reg_read_add2];

    // If clock edge is positive and regwrite is 1, we write data to specified register
    always @(posedge clock)
    begin
        if (wr_reg_enable) begin
            reg_memory[reg_write_add] = datawrite_to_reg;
        end     
    else
        reg_memory[reg_write_add] = 32'h00000000;
    end
endmodule


/////PROCESSOR


module PROCESSOR(
    input clock,
    input reset,
    output Output
);

    wire [31:0] instruction_Code;
    wire [3:0] ALu_control;
    wire WR_reg_enable;
    wire WR_mem_enable;
    wire RD_mem_enable;


    IFU IFU_module(.clock(clock), .reset(reset), .Instruction_Code(instruction_Code));
    
    CONTROL control_module(.opcode(instruction_Code[4:0]),.alu_control(ALu_control),.regwrite_control(WR_reg_enable),.memread_control(RD_mem_enable),.memwrite_control(WR_mem_enable));
    
    DATAPATH datapath_module(.Wr_mem_enable(WR_mem_enable),.Rd_mem_enable(RD_mem_enable),.Read_reg_add1(instruction_Code[9:5]),.Read_reg_add2(instruction_Code[14:10]),.Reg_write_add(instruction_Code[19:15]),.Address(instruction_Code[31:20]),.Alu_control(ALu_control),.Wr_reg_enable(WR_reg_enable), .clock(clock), .reset(reset), .OUTPUT(Output));

endmodule

**********************************************************************************************************************************************************

Below is my Synthesis.tcl file for genus synthesis

********************

set_attribute lib_search_path "/home/sameer23185/Desktop/VDF_PROJECT/lib"
set_attribute hdl_search_path "/home/sameer23185/Desktop/VDF_PROJECT"
set_attribute library "/home/sameer23185/Desktop/VDF_PROJECT/lib/90/fast.lib"
read_hdl Master.v
elaborate
read_sdc Min_area.sdc
set_attribute hdl_preserve_unused_register true
set_attribute delete_unloaded_seqs false
set_attribute optimize_constant_0_flops false
set_attribute optimize_constant_1_flops false
set_attribute optimize_constant_latches false
set_attribute optimize_constant_feedback_seqs false
#set_attribute prune_unsued_logic false
synthesize -to_mapped -effort medium
write_hdl > report/HDL_min_Netlist.v
write_sdc > report/constraints.sdc
write_script > report/synthesis.g
report_timing > report/synthesis_timing_report.rep
report_power > report/synthesis_power_report.rep
report_gates > report/synthesis_cell_report.rep
report_area > report/synthesis_area_report.rep
gui_show

**********************************************

WHEN I COMPARING MY GOLDEN.V WITH HDL_min_Netlist.v  during   conformal , I got  these  non-equivalent   point   for   every reg memory and for every data memory. I don't know what to do with these non-equivalent point. I've been stuck here for the past four days. Please help me in this and how can I remove this non- equivalent point , since I am new to this I really don't know what to do.

hi

How can I tell the LEC tool to ignore a combination of Primary input bus in both Golden and revised.

For example in both Golden and revised there is 

input [3:0] data_in

I want LEC not to check the case that data_in[3:0] == 4'b1000

The course "Jasper Formal Fundamentals v24.03" introduces formal analysis to those who want to use formal analysis for design or verification. 

To optimally benefit from this course, you must already have sufficient knowledge of the System Verilog assertions to be capable of writing properties for formal verification. Hence, this training provides a module on formal analysis to help cover this essential background. 

In this course, you will learn how to code efficient SVA Properties for formal analysis, understand formal complexity and how to overcome it, and learn the basics of formal coverage.

After completing this course, you will be able to:

• Define reusable, functionally correct SVA properties that are efficient for formal tools. These shall use abstract auxiliary code to simplify descriptions, make code maintenance easier, reduce debug time, and reduce tool-proof runtime.
• Set up, run, and analyze results from formal analysis.
• Identify designs upon which formal is likely to be successful while understanding formal complexity issues and how to identify and overcome them.
• Use a systematic property development process to approach a completely new verification problem.
• Understand the basics of formal coverage.

 The most recently updated release includes new modules on:

• "Basic complexity handling" which discusses the complexity in formal and how to identify and handle them.
• "Complexity reduction methods” which discusses the complexity reduction methods and which is suitable for which type of complexity problem.
• “Coverage in formal” which discusses the basics of coverage in formal verification and how coverage can be used in formal.   

Take this course to learn the basics of formal verification. 

What's Next? 

You can check out the complete training: Jasper Formal Fundamentals. There is a free online version of the training available 24/7 for all customers with a Cadence Learning and Support Portal account. If you are interested in an instructor-led version of the training, please contact Cadence Training. And don't forget to obtain your digital badge after completing the training!

You can also check Jasper University page for more materials on formal analysis and Jasper apps. 

Related Trainings 

Jasper Formal Expert Training Course | Cadence

Verilog Language and Application Training Course | Cadence

SystemVerilog for Design and Verification Training Course | Cadence

SystemVerilog Assertions Training Course | Cadence

Related Training Bytes 

Jasper Formal Property Verification (FPV) App: Basic Usage Demo (Video)

Jasper Formal Methodology playlist

Related Training Blogs

It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!

Training Insights: Introducing the C++ Course for All Your C++ Learning Needs!

Training Insights: Reaching Your Verification Closure Using Verisium Manager

Training Insights - Free Online Courses on Cadence Learning and Support Portal

Hello,

I am new in formal verification and I have a concept question about how to verify an I2C Slave block.

I think the response should be valid for any serial interface which needs to receive information for several clocks before making an action.

The the protocol description is the following: 

I have a serial clock (SCL), Serial Data Input (SDI) and Serial Data Output (SDO), all are ports of the I2C Slave block.

The protocol looks like this:

The first byte which is received by the slave consists in 7bits of sensor address and the 8th bit is the command 0/1 Write/Read.

After the first 8 bits, the slave sends an ACK (SDO = 1 for 1 clock) if the sensor address is correct.

Lets consider only this case, where I want to verify that the slave responds with an ACK if the sensor address is correct.

The only solution I found so far was to use the internal buffer from the block which saves the received bits during 8 clocks. The signal is called shift_s.

I also needed to use internal chip state (state_s) and an internal counter (shift_count_s).

Instead of doing an direct check of the SDO(sdo_o) depending on SDI (sdi_d_i), I used the internal shift_s register.

My question is if my approach is the correct one or there is a possibility to write the verification at a blackbox level.

Below you have the 2 properties: first checks connection from SDI to internal buffer, the second checks the connection between internal buffer and output.

property prop_i2c_sdi_store;
  @(posedge sclk_n_i)
  $past(i2c_bl.state_s == `STATE_RECEIVE_I2C_ADDR)
    |-> i2c_bl.shift_s == byte'({ $past(i2c_bl.shift_s), $past(sdi_d_i)});
endproperty
APF_I2C_CHECK_SDI_STORE: assert property(prop_i2c_sdi_store);

property prop_i2c_sensor_addr(sens_addr_sel, sens_addr);
@(posedge sclk_n_i) (i2c_bl.state_s == `STATE_RECEIVE_I2C_ADDR) && (i2c_addr_i == sens_addr_sel) && (i2c_bl.shift_count_s == 7)
  ##1 (i2c_bl.shift_s inside {sens_addr, sens_addr+1}) |-> sdo_o;
endproperty
APF_I2C_CHECK_SENSOR_ADDR0: assert property(prop_i2c_sensor_addr(0, `I2C_SENSOR_ADDRESS_A0));
APF_I2C_CHECK_SENSOR_ADDR1: assert property(prop_i2c_sensor_addr(1, `I2C_SENSOR_ADDRESS_A1));
APF_I2C_CHECK_SENSOR_ADDR2: assert property(prop_i2c_sensor_addr(2, `I2C_SENSOR_ADDRESS_A2));
APF_I2C_CHECK_SENSOR_ADDR3: assert property(prop_i2c_sensor_addr(3, `I2C_SENSOR_ADDRESS_A3));

PS: i2c_addr_i is address selection for the slave (there are 4 configurable sensor addresses, but this is not important for the case).

Thank you!

Hi

I have tried using "add net constraints" command to place one-cold constraints on a tristate enable bus. In the command line we need to specify the "net pathname" on which the constraints are to be enforced.

The bus here is 20-bit. How should the net pathname be specified to make this 20-bit bus signals one_hot or one_cold.

The bus was declared as follows:
ten_bus [19:0]

The command I used was

add net constraints one_hot /ren_bus[19]

What would the above command mean?
Should we not specify all the nets' pathnames on the bus?
Is it sufficient to specify the pathname of one net on the bus?
I could not get much info regarding the functionality of this command. I would be obliged if anyone can throw some light.

Thanks
Prasad.

Conformal ECO Designer enables you to implement RTL engineering change orders (ECOs) for pre- and post-mask layout and offers early ECO prototyping capabilities for driving critical project decisions.

Conformal ECO compares two designs and generates a functional patch that implements the changes between the two designs.

One major criterion for determining patch quality is whether the patch can meet timing closure. To determine this, you typically need to run the time-consuming process of incremental synthesis and place-and-route. Instead, Conformal can analyze path logic depth changes before and after ECO patch generation. This provides a faster way to evaluate timing impact in patch generation stages.

After the patch is created and applied, it is passed to Genus to optimize the patch.

During patch optimization, you can choose to do many things like:

• Keeping constants in the patch
• Allowing tie cell inversion
• Specifying tie cell types
• Preserve DFF cells and cell types in the patch
• Preserve all cells and nets in the patch
• Preserve clock buffer cell in the patch
• Turn on/off sequential constant and sequential merge in patch optimization
• Allowing phase mapping for DFFs
• Map to spare cells
• Force fix DRC before timing

What's Next?

Join the Conformal ECO course to:

• Explore the many options and capabilities of Conformal ECO
• Use Conformal Engineering Change Order (ECO) for flat and hierarchical designs
• Generate a functional ECO patch, apply it to a design, optimize it, and map it to a specified technology
• Run a hierarchical design through ECO and run a comparison to prove the ECO is equivalent
• Run a postmask ECO using Conformal ECO GXL

Make sure you have experience with Conformal Equivalence Checker or completed the Conformal Equivalence Checking course before taking this course.

The online class is free for all Cadence customers with a Cadence Learning and Support Portal account. If you don’t have a Cadence Support account, go to Registration Help or Register Now and complete the requested information. For instructor-led training sessions "Live" or "Blended" please contact Cadence Training.

Please don't forget to obtain your Digital Badge after completing the training. Add your free digital badge to your email signature or any social media and networking platform to show your qualities and build trust, making you and your projects even more successful.

wellington, new zealand — New Zealand's Prime Minister Christopher Luxon made a “formal and unreserved” apology in Parliament on Tuesday for the widespread abuse, torture and neglect of hundreds of thousands of children and vulnerable adults in care. “It was horrific. It was heartbreaking. It was wrong. And it should never have happened,” Luxon said, as he spoke to lawmakers and a public gallery packed with survivors of the abuse. An estimated 200,000 people in state, foster and faith-based care suffered “unimaginable” abuse over a period of seven decades, a blistering report released in July said at the end of the largest inquiry ever undertaken in New Zealand. They were disproportionately Māori, New Zealand’s Indigenous people. “For many of you it changed the course of your life, and for that, the government must take responsibility,” Luxon said. He said he was apologizing for previous governments too. In foster and church care — as well as in state-run institutions, including hospitals and residential schools — vulnerable people “should have been safe and treated with respect, dignity and compassion," he added. “But instead, you were subjected to horrific abuse and neglect and, in some cases, torture.” The findings of the six-year investigation believed to be the widest-ranging of comparable probes worldwide were a “national disgrace,” the inquiry's report said. New Zealand's investigation followed two decades of such inquiries around the globe as nations struggle to reckon with authorities’ transgressions against children removed from their families and placed in care. Of 650,000 children and vulnerable adults in New Zealand's state, foster, and church care between 1950 and 2019 — in a country that today has a population of 5 million — nearly a third endured physical, sexual, verbal or psychological abuse. Many more were exploited or neglected. “We will never know that true number,” Chris Hipkins, the leader of the opposition, told Parliament. “Many people entering into state and faith-based institutions were undocumented. Records were incomplete, they've gone missing, and in some cases, yes, they were deliberately destroyed.” In response to the findings, New Zealand’s government agreed for the first time that historical treatment of some children in a notorious state-run hospital amounted to torture — a claim successive administrations had rejected. “I am deeply sorry that New Zealand did not do better by you. I am sorry you were not believed when you came forward to report your abuse,” Luxon said. “I am sorry that many abusers were not made to face justice which meant that other people experienced abuse that could have been prevented.” His government was working on 28 of the inquiry's 138 recommendations, Luxon said, although he did not yet have concrete details on financial redress, which the inquiry had exhorted since 2021 and said could run to billions of dollars. Luxon was decried by some survivors and advocates earlier Tuesday for not divulging compensation plans alongside the apology. He told Parliament a single redress system would be established in 2025. He did not, however, suggest a figure for the amount the government expected to pay. “There will be a big bill, but it's nothing compared to the debt we owe those survivors and it must not be the reason for any further delay,” said Hipkins, the opposition leader. Survivors began to arrive at Parliament hours before the apology, having won spots in the public gallery — which only seats about 200 people — by ballot. Some were reluctant to accept the state's words, because they said the scale of the horror was not yet fully understood by lawmakers and public servants. Jeering was so loud during an apology from the country's solicitor-general that her speech was inaudible. Others called out or left the room in tears while senior public servants from relevant health and welfare agencies spoke before Luxon's remarks. Survivors invited to give speeches were required to do so before Luxon's apology — rather than in response to it, said Tu Chapman, one of those asked to speak. “Right now I feel alone and in utter despair at the way in which this government has undertaken the task of acknowledging all survivors,” she told a crowd at Parliament. The abuse "ripped families and communities apart, trapping many into a life of prison, incarceration, leaving many uneducated,” said Keith Wiffin — a survivor of abuse in a notorious state-run boys' home. “It has tarred our international reputation as an upholder of human rights, something this nation likes to dine out on.” The inquiry's recommendations included seeking apologies from state and church leaders, among them Pope Francis. It also endorsed creating offices to prosecute abusers and enact redress, renaming streets and monuments dedicated to abusers, reforming civil and criminal law, rewriting the child welfare system and searching for unmarked graves at psychiatric facilities. Its writers were scathing about how widely the abuse — and the identities of many abusers — were known about for years, with nothing done to stop it. “This has meant you have had to re-live your trauma over and over again,” said Luxon. “Agencies should have done better and must commit to doing so in the future.” He did not concede that public servants or ministers in his government who had denied state abuse was widespread when they served in previous administrations should lose their jobs. Luxon has also rejected suggestions by survivors that policies he has enacted which disproportionately target Māori — such as crackdowns on gangs and the establishment of military-style boot camps for young offenders — undermine his government's regret about the abuse. Māori are over-represented in prisons and gangs. In 2023, 68% of children in state care were Māori, although they are less than 20% of New Zealand's population. “It's not enough to say sorry,” said Fa’afete Taito, a survivor of violent abuse at another state-run home, and a former gang member. “It's what you do to heal the wounds of your actions and make sure it never happens again that really counts.”

to write informal report

Migration may reinforce less productive forms of informal employment in rural Nepal.

An inquiry found abuse, torture and neglect of some 200,000 people in state care over 70 years. People with disabilities or from Maori and Pacific Islander communities were especially vulnerable.

In a significant setback for the ePharmacy sector, government officials have displayed reluctance in formalizing the online sale of drugs and medications.

The Ministry of Labour and Employment reports that a staggering 93% of India's workforce operates in the informal sector. Many of these workers, including

The European Union has expanded its scrutiny of online marketplaces by opening a formal proceeding on Chinese low-cost e-commerce platform, Temu, under the Digital Services Act (DSA), the Commission announced Thursday. Enforcers of the online governance framework will now dial up their oversight of Temu. The bloc’s suspicions are focused on concerns about the sale […]

© 2024 TechCrunch. All rights reserved. For personal use only.

A material recovery and segregation facility in Delhi shows that this is possible

A social enterprise in Delhi attempts to bring informal dismantlers and recyclers under the mainstream umbrella

The app requires spots to be the first to send a message. This cuts down on those inboxes stuffed with messages from strangers; particularly those, shall we say, more forward messages. Of course, you need to still be smart about meeting up with strangers, but for no-strings-attached relationships, Pure is a fairly good place to […]

You should focus on one thing wondering the method to pickup actual MILFs close to me. All the cougars are often underestimated by their bosses, husbands (or ex-husbands), pals. Fucking a mature Carry Bradshaw Evaluation of Flirt features (yes, it is from the same Sex and the City, dude) is a dream of many! Local […]