For all the sporting moments Mark Blinch has captured through his lens for nearly two decades, there is only one he has taken the trouble to hang in his home.

Gus has been captivating visitors to the Nova Scotia Museum of Natural History for more than seven decades.

Background. CLSI and EUCAST susceptibility breakpoints for voriconazole and C. albicans differ by one dilution (≤0.125 and ≤0.06 mg/l, respectively) whereas the epidemiological cutoff values (ECOFF/ECV) with both methodologies are the same (0.03 mg/L). We therefore determined the pharmacokinetic-pharmacodynamic (PK/PD) breakpoints of voriconazole against C. albicans for both methodologies with an in vitro PK/PD model, which was validated using existing animal PK/PD data.

Methods. Four clinical wild-type and non-wild-type C. albicans isolates (voriconazole MICs 0.008-0.125 mg/l) were tested in an in vitro PK/PD model. For validation purposes, mouse PK were simulated and in vitro PD were compared with in vivo outcome. Human PK were simulated and the exposure-effect relationship fAUC_0-24/MIC was described for EUCAST and CLSI24/48h methods. PK/PD breakpoints were determined using the fAUC_0-24/MIC associated with half-maximal activity (EI₅₀) and Monte Carlo simulation analysis.

Results. The in vitro 24h-PD EI₅₀ of voriconazole against C. albicans were 2.5-5 (1.5-17) fAUC/MIC. However, the 72h-PD were higher, 133 (51-347) fAUC/MIC for EUCAST and 94 (35-252) fAUC/MIC for CLSI. The mean (95% confidence interval) probability of target attainment (PTA) was 100(95-100)%, 97(72-100)%, 83(35-99)%, and 49(8-91)% and 100(97-100)%, 99(85-100)%, 91(52-100)% and 68(17-96)% for EUCAST and CLSI MICs 0.03, 0.06, 0.125, and 0.25 mg/L, respectively. Significantly, >95% PTAs were found for EUCAST/CLSI MICs ≤0.03 mg/ll. For MICs 0.06-0.125 mg/l trough levels 1-4 mg/ll would be required.

Conclusion. A PK/PD breakpoint of C. albicans voriconazole at the ECOFF/ECV of 0.03 mg/L was determined for both EUCAST/CLSI methods, indicating the need for breakpoint harmonization for the reference methodologies.

Rock and roll legend Little Richard has died aged 87.

Technology like DNA testing and facial recognition has helped me piece together a family history torn apart by war. But honoring Holocaust Remembrance Day is about more than remembering the past.

Delaware Attorney General Kathleen Jennings announced Thursday a multistate settlement with Johnson & Johnson and its subsidiary, Ethicon, Inc., for their deceptive marketing of transvaginal surgical mesh devices. A multistate investigation found the companies violated state consumer protection laws by misrepresenting the safety and effectiveness of the devices and failing to sufficiently disclose risks associated […]

Here Mudassar Ahmed Khan has explained with an example, how to show jQuery DatePicker Calendar when the Bootstrap FontAwesome Glyphicon Icon is clicked. Basically, this article will explain how to replace the jQuery DatePicker Calendar Icon with Bootstrap FontAwesome Glyphicon Icon so that when the Bootstrap FontAwesome Glyphicon Icon is clicked, the jQuery DatePicker Calendar is shown.

Here Mudassar Ahmed Khan has explained with an example, how to show Calendar Icon (Image) next to TextBox using Bootstrap DatePicker (Calendar) plugin. The Calendar Icon (Image) will be displayed using Calendar Icon with Bootstrap FontAwesome Glyphicon Icon. When the Bootstrap FontAwesome Glyphicon Icon is clicked, the Bootstrap DatePicker Calendar is shown.

Launched in 2010 to mark the 30th anniversary of the launch of the original Pac-Man video game, the game was Google’s first playable doodle.

A one-of-the-kind Russian website has enabled anyone to pay vocal tribute to the 75th anniversary of Nazi Germany’s defeat – by performing a beloved Russian Victory Day song with lyrics available in multiple languages.
Read Full Article at RT.com

High taxes, bad healthcare, police repression, lack of culture, poor education… Telegram founder Pavel Durov wants you to know he really doesn’t like Silicon Valley and thinks living or doing business in the US is a terrible idea.
Read Full Article at RT.com

Social media feeds are filled with historic shots marking Victory Day, but Facebook seems to have taken issue with one that symbolizes the Soviet victory over Nazi Germany, and it keeps deleting a recently-colorized version of it.
Read Full Article at RT.com

Born in Ait Lahcene, near the Kabylie capital of Tizi Ouzou, then part of French Algeria, he studied to be a geologist, but his life took a turn in 1973 when he was called up as a last-minute replacement on the radio to sing the Berber lullaby 'A Vava Inouva.'

China in January closed all its museums and tourist centres all over the country to prevent the spread of the coronavirus.

Silicon Valley has lately come to the realisation that it is not the meritocracy it has long pretended to be...

We break down the groundbreaking performances of the 2000s, featuring stars from Big Papi and Joey Bats to JV, Kershaw and the Freak.

As a leading venture capitalist in the electronics technology, as well as CEO of Cadence, Lip-Bu Tan has unique insights into ongoing changes that will impact EDA providers and users. Tan shared some of those insights in a “fireside chat” with Ed Sperling, editor in chief of Semiconductor Engineering, at the Design Automation Conference (DAC 2015) on June 9.

Topics of this discussion included industry consolidation, the need for more talent and more startups, Internet of Things (IoT) opportunities and challenges, the shift from ICs to full product development, and the challenges of advanced nodes. Following are some excerpts from this conversation, held at the DAC Pavilion theater on the exhibit floor.

Ed Sperling (left) and Lip-Bu Tan (right) discuss trends in semiconductors and EDA

Q: As you look out over the semiconductor and EDA industries these days, what worries you most?

Tan: At the top of my list is all the consolidation that is going on. Secondly, chip design complexity is increasing substantially. Time-to-market pressure is growing and advanced nodes have challenges.

The other thing I worry about is that we need to have more startups. There’s a lot of innovation that needs to happen. And this industry needs more top talent. At Cadence, we have a program to recruit over 10% of new hires every year from college graduates. We need new blood and new ideas.

Q: EDA vendors were acquiring companies for many years, but now the startups are pretty much gone. Where does the next wave of innovation come from?

Tan: I’ve been an EDA CEO for the last seven years and I really enjoy it because so much innovation is needed. System providers have very big challenges and very different needs. You have to find the opportunities and go out and provide the solutions.

The opportunities are not just in basic tools. Massive parallelism is critical, and the power challenge is huge. Time to market is critical, and for the IoT companies, cost is going to be critical. If you want to take on some good engineering challenges, this is the most exciting time.

Q: You live two lives—you’re a CEO but you’re also an investor. Where are the investments going these days and where are we likely to see new startups?

Tan: Clearly everybody is chasing the IoT. There is a lot of opportunity in the cloud, in the data center. Also, I’m a big believer in video, so I back companies that are video related. A big area is automotive. ADAS [Advanced Driver Assistance Systems] is a tremendous opportunity.

These companies can help us understand how the industry is transforming, and then we can provide solutions, either in terms of IP, tools, or the PCB. Then we need to connect from the system level down to semiconductors. I think it’s a different way to design.

Q: What happens as we start moving from companies looking to design a semiconductor to system companies who are doing things from the perspective that we have this purpose for our software?

Tan: We are extending from EDA to what we call system design enablement, and we are becoming more application driven. The application at the system level will drive the silicon design. We need to help companies look at the whole system including the power envelope and signal integrity. You don’t want to be in a position where you design a chip all the way to fabrication and then find the power is too high.

We help the customers with hardware/software co-design and co-verification. We have a design suite and a verification suite that can provide customers with high-level abstractions, as well as verify IP blocks at the system level. Then we can break things down to the component level with system constraints in mind, and drive power-aware, system-aware design.

We are starting to move into vertical markets. For example, medical is a tremendous opportunity.

Q: How does this approach change what you provide to customers?

Tan: Every year I spend time meeting with customers. I think it is very important to understand what they are trying to design, and it is also important to know the customer’s customer requirements. We might say, “Wait a minute, for this design you may want to think about power or the library you’re using.” We help them understand what foundry they should use and what process they should use. They don’t view me as a vendor—they view me as a partner.

We also work very closely with our IP and foundry partners. We work as one team—the ultimate goal is customer success.

Q: Is everybody going to say, FinFETs are beautiful, we’re going to go down to 10nm or 7nm—or is it a smaller number of companies who will continue down that path?

Tan: Some of the analog/mixed-signal companies don’t need to go that far. We love those customers—we have close to 50% of that business. But we also have customers in the graphics or processor area who are really pushing the envelope, and need to be in 16nm, 14nm, or 10nm. We work very closely with those guys to make sure they can go into FinFETs.

We always want to work with the customer to make sure they have a first-time silicon success. If you have to do a re-spin, you miss the opportunity and it’s very costly.

Q: There’s a new market that is starting to explode—IoT. How real is that world to you? Everyone talks about large numbers, but is it showing up in terms of tools?

Tan: Everybody is talking about huge profits, but a lot of the time I think it is just connecting old devices that you have. Billions of units, absolutely yes, but if you look close enough the silicon percentage of that revenue is very tiny. A lot of the profit is on the service side. So you really need to look at the service killer app you are trying to provide.

What’s most important to us in the IoT market is the IP business. That’s why we bought Tensilica—it’s programmable, so you can find the killer app more quickly. The other challenges are time to market, low power, and low cost.

Q: Where is system design enablement going? Does it expand outside the traditional market for EDA?

Tan: It’s not just about tools. IP is now 11% of our revenue. At the PCB level, we acquired a company called Sigrity, and through that we are able to drive system analysis for power, signal integrity, and thermal. And then we look at some of the verticals and provide modeling all the way from the system level to the component level. We make sure that we provide a solution to the end customer, rather than something piecemeal.

Q: What do you think DAC will look like in five years?

Tan: It’s getting smaller. We need to see more startups and innovative IP solutions. I saw a few here this year, and that’s good. We need to encourage small startups.

Q: Where do we get the people to pull this off? I don’t see too many people coming into EDA.

Tan: I talk to a lot of university students, and I tell them that this small industry is a gold mine. A lot of innovation is needed. We need them to come in [to EDA] rather than join Google or Facebook. Those are great companies, but there is a lot of fundamental physical innovation we need.

Richard Goering

Related Blog Posts

- Gary Smith at DAC 2015: How EDA Can Expand Into New Directions

- DAC 2015: Google Smart Contact Lens Project Stretches Limits of IC Design

- Q&A with Nimish Modi: Going Beyond Traditional EDA

I recently attended a webinar presented by Wally Rhines about his new book, Predicting Semiconductor Business Trends After Moore's Law . Wally was the CEO of Mentor, as you probably know. Now he...

[[ Click on the title to access the full blog on the Cadence Community site. ]]

Everyone keeps talking about “the cloud” this and “the cloud” that these days—but you’re a semiconductor designer. Everyone keeps saying “the cloud” is revolutionizing all aspects of electronics design—but what does it mean for you? Cadence's own Tom Hackett discussed this in a presentation at the Cadence Theater during DAC 2019.

What people refer to as “the cloud” is commonly divided into three categories: Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and software as a Service (SaaS). With IaaS, you bring your own software—i.e. loading your owned or appropriately licensed tools onto cloud hardware that you rent by the minute. This service is available from providers like Google Cloud Platform, Amazon Web Service, and Microsoft Azure. In PaaS (also available from the major cloud providers), you create your own offering using capabilities and a software design environment provided by the cloud vendor that makes subsequent scaling and distribution really easy because the service was “born in the cloud”.  Lastly, there’s SaaS, where the cloud is used to access and manage functionality and data without requiring users to set up or manage any of the underlying infrastructure used to provide it.  SaaS companies like Workday and Salesforce deliver their value in this manner.  The Cadence Cloud portfolio makes use of both IaaS and SaaS, depending on the customers’ interest.  Cadence doesn’t have PaaS offerings because our customers don’t create their own EDA software from building blocks that Cadence provides.

All of these designations are great, but you’re a semiconductor designer. Presumably you use Workday or some similar software, or have in the past when you were an intern, but what about all of your tools? Those aren’t on the cloud.

Wait—actually, they are.

Using EDA tools in the cloud allows you to address complexity and data explosion issues you would have to simply struggle through before. Since you don’t have to worry about having the compute-power on-site, you can use way more power than you could before. You may be wary about this new generation of cloud-based tools, but don’t worry: the old rules of cloud computing no longer apply. Cloud capacity is far larger than it used to be, and it’s more secure. Updates to scheduling software means that resource competition isn’t as big of a deal anymore. Clouds today have nearly unlimited capacity—they’re so large that you don’t ever need to worry about running out of space.

The vast increase in raw compute available to designers through the cloud makes something like automotive functional safety verification, previously an extremely long verification task, doable in a reasonable time frame. With the cloud, it’s easy to scale the amount of compute you’re using to fit your task—whether it’s an automotive functional safety-related design or a small one.

Nowadays, the Cadence Cloud Portfolio brings you the best and brightest in cloud technology. No matter what your use case is, the Cadence Cloud Portfolio has a solution that works for you. You can even access the Palladium Cloud, allowing you to try out the benefits of an accelerator without having to buy one.

Cloud computing is the future of EDA. See the future here.

Longfellow's metaphorical footprints on the sands of time is more profound and eternal no doubt but a footprint for silicon (a form of sand isn't it?) is as important for PCB designers. So, here we will list the steps to create a fo...(read more)

FreeBSD Security Advisory - With certain inputs, iconv may write beyond the end of the output buffer. Depending on the way in which iconv is used, an attacker may be able to create a denial of service, provoke incorrect program behavior, or induce a remote code execution. iconv is a libc library function and the nature of possible attacks will depend on the way in which iconv is used by applications or daemons.

Malwarebytes Researchers Say Attacks Appear Related to Magecart
Cybercriminals are hiding malicious JavaScript skimmers in the "favicon" icons of several ecommerce websites in an effort to steal payment card data from customers, researchers at Malwarebytes say.

Malwarebytes Researchers Say Attacks Appear Related to Magecart
Cybercriminals are hiding malicious JavaScript skimmers in the "favicon" icons of several ecommerce websites in an effort to steal payment card data from customers, researchers at Malwarebytes say.

Malwarebytes Researchers Say Attacks Appear Related to Magecart
Cybercriminals are hiding malicious JavaScript skimmers in the "favicon" icons of several ecommerce websites in an effort to steal payment card data from customers, researchers at Malwarebytes say.

Malwarebytes Researchers Say Attacks Appear Related to Magecart
Cybercriminals are hiding malicious JavaScript skimmers in the "favicon" icons of several ecommerce websites in an effort to steal payment card data from customers, researchers at Malwarebytes say.

Chief executives of the nation's leading companies like Samsung Electronics, SK Hynix, and LG Display have made a request to the government to relieve the problem of labor shortage in the area of semiconductor and display. Kwon Oh-hyun, vice chairman of Samsung Electronics, said on September 18 in a discussion session held in Kensington Hotel in Seoul's Yoido presided over by Minister of Trade, Industry, and Energy Baek Woon-gyu, "Skilled workers are in short supply in fast-growing industries...

Turkey's historic Grand Bazaar will reopen for shopping as of June 1, the chairman of the iconic tourist destination said on May 8. 

The U.S. needs a more expansive strategy to maintain its lead in this field, and that means working closely with its allies, especially Japan.

An exquisite estate in Cherry Hills Village that finished as a finalist for the 2019 Home of the Year in Colorado Homes & Lifestyles Magazine was recently listed for sale at $7.75 million.

Microchip Expands Silicon Carbide (SiC) Family of Power Electronics to Provide System Level Improvements in Efficiency, Size and Reliability

PIC16(L)F18854 Family Silicon Errata and Data Sheet Clarification

PIC16(L)F18857/18877 Family Silicon Errata and Data Sheet Clarification

SAM G55 Series Family Silicon Errata and Data Sheet Clarifications

PIC32MX1XX/2XX Family Silicon Errata and Data Sheet Clarification

PIC32MX1XX/2XX/5XX 64/100-pin Family Silicon Errata and Data Sheet Clarification

PIC32MX534/564/664/764 Family Silicon Errata and Data Sheet Clarification

PIC32MX320/340/360/440/460 Family Silicon Errata and Data Sheet Clarification

PIC18F26/46/56Q43 Silicon Errata and Data Sheet Clarifications

PIC18F25/45/55Q43 Silicon Errata and Data Sheet Clarifications

PIC18F27/47/57Q43 Family Silicon Errata and Data Sheet Clarifications

AVR128DA28/32/48/64 Silicon Errata and Data Sheet Clarification

PIC32MM0256GPM064 Family Silicon Errata and Data Sheet Clarification

ATxmega128/64/32/16A4U Silicon Errata and Data Sheet Clarification

SST Announces Qualification of Smartbit™ OTP NVM Technology for ON Semiconductor’s 110 nm CMOS Process

Rep. McSally Visits Microchip Executives to Discuss Semiconductor Supply Chain Resilience in the U.S. Amid Defense Industrial Base Report Findings

During the early 1900s, the city of Mumbai witnessed an unprecedented peak in social, artistic, and cultural activity. At the center of this movement was the Royal Opera House, Mumbai, India’s ‘cultural crown jewel’ and only surviving opera house. Built...

The bloom is off seed funding, the business of providing money to brand-new startups, as investors take a more measured approach to financing emerging U.S. technology companies.

Dingoes have been persecuted in Australia for centuries for killing livestock, but protecting them could benefit the environment and aid recovery from the devastating fires