Teaching advanced programming can be a challenge, especially when the students are pursuing different majors with diverse analytical and problem-solving capabilities. The purpose of this paper is to explore the efficacy of using a particular problem as a vehicle for imparting a broad set of programming concepts and problem-solving techniques. We present a classic brain teaser that is used to communicate and demonstrate advanced software development concepts and techniques. Our results show that students with varied academic experiences and goals, assuming at least one procedural/structured programming pre-requisite, can benefit from and also be challenged by such an exercise. Although this problem has been used by others in the classroom, we believe that our use of this problem in imparting such a broad range of topics to a diverse student population is unique.

Increasingly, numerous universities have identified benefits of flipped learning environments and have been encouraging instructors to adapt such methodologies in their respective classrooms, at a time when departments are facing significant budget constraints. This article proposes an instructional design framework utilized to strategically enhance traditional flipped methodologies in a first-year engineering course, by using low-cost technology aids and proven pedagogical techniques to enhance student learning. Implemented in a first-year engineering course, this modified flipped model demonstrated an improved student awareness of essential engineering concepts and improved academic performance through collaborative and active learning activities, including flipped learning methodologies, without the need for expensive, formal active learning spaces. These findings have been validated through two studies and have shown similar results confirming that student learning is improved by the implementation of multi-pedagogical strategies in-formed by the use of an instructional design in a traditional classroom setting.

Aim/Purpose: This paper presents the findings of an Activity-Oriented Teaching Strategy (AOTS) conducted for a postgraduate level Software Engineering (SE) course with the aim of imparting meaningful software development experience for the students. The research question is framed as whether the activity-oriented teaching strategy helps students to acquire practical knowledge of Software Engineering and thus bridge the gap between academia and software industry. Background: Software Engineering Education (SEE) in India is mainly focused on teaching theoretical concepts rather than emphasizing on practical knowledge in software development process. It has been noticed that many students of CS/IT background are struggling when they start their career in the software industry due to inadequate familiarity with the software development process. In the current context of SE education, there is a knowledge gap between the theory learned in the classroom and the actual requirement demanded by the software industry. Methodology: The methodology opted for in this study was action research since the teachers are trying to solve the practical problems and deficiencies encountered while teaching SE. There are four pedagogies in AOTS for fulfilling the requirements of the desired teaching strategy. They are flipped classroom, project role-play for developing project artifacts, teaching by example, and student seminars. The study was conducted among a set of Postgraduate students of the Software Engineering programme at Cochin University of Science and Technology, India. Contribution: AOTS can fulfil both academic and industrial requirements by actively engaging the students in the learning process and thus helping them develop their professional skills. Findings: AOTS can be molded as a promising teaching strategy for learning Software Engineering. It focuses on the essential skill sets demanded by the software industry such as communication, problem-solving, teamwork, and understanding of the software development processes. Impact on Society: Activity-oriented teaching strategies can fulfil both academic and industrial requirements by actively engaging the students in the SE learning process and thus helping them in developing their professional skills. Future Research: AOTS can be refined by adding/modifying pedagogies and including different features like an online evaluation system, virtual classroom etc.

Aim/Purpose: This study was aimed at enhancing students’ learning of software engineering methods. A collaboration between the Computer Science, Business Management, and Product Design programs was formed to work on actual projects with real clients. This interdisciplinary form of collaboration simulates the realities of a diverse Software Engineering team. Background: A collaborative approach implemented through projects has been the established pedagogy for introducing the Software Engineering course to undergraduate Computer Science students. The collaboration, however, is limited to collaboration among Computer Science students and their clients. This case study explored an enhancement to the collaborative approach to project development by integrating other related disciplines into the project development framework; hence, the Interdisciplinary Approach. Methodology: This study adopted the case method approach. An interdisciplinary service innovation activity was proposed to invite other disciplines in the learning process of the computer science students. The agile methodology Scrum was used as the software development approach during project development. Survey data were collected from the students to establish (a) their perception of the interdisciplinary approach to project development; (b) the factors that influenced success or failure of their team to deliver the project; and (c) the perceived skills or knowledge that they acquired from the interdisciplinary approach. Analysis of data followed a mixed method approach. Contribution: The study improved the current pedagogy for Software Engineering education by integrating other related disciplines into the software project development framework. Findings: Data collected showed that the students generally accepted the interdisciplinary approach to project development. Factors such as project relevance, teamwork, time and schedule, and administration support, among others, affect team performance towards project completion. In the case of the Computer Science students, results show that students have learned skills during the experience that, as literature reveal, can only be acquired or mastered in their future profession as software engineers. Recommendations for Practitioners: The active collaboration of the industry with the University and the involvement of the other related courses in teaching software engineering methods are critical to the development of the students, not only in learning the methodology but also as a working professional. Recommendation for Researchers: It is interesting to know and eventually understand the interactions between interdisciplinary team members in the conduct of Software Engineering practices while working on their projects. More specifically, what creative tensions arise and how do the interdisciplinary teams handle the discourse? Impact on Society: This study bridges the gap between how Software Engineering is taught in the university and how Software Engineering teams work in real life. Future Research: Future research is targeted at refining and elaborating the elements of the interdisciplinary framework presented in this paper towards an integrated course module for Software Engineering education.

Aim/Purpose: Bioengineering is a burgeoning interdisciplinary learning domain that could inspire the imaginations of elementary aged children but is not traditionally taught to this age group for reasons unrelated to student ability. This pilot study presents the BacToMars videogame and accompanying curricular intervention, designed to introduce children (aged 7-11) to foundational concepts of bioengineering and to the interdisciplinary nature of scientific endeavors. Background: This pilot study explores the bioengineering-related learning outcomes and attitudes of children after engaging with the BacToMars game and curriculum intervention. Methodology: This study drew on prior findings in game-based learning and applied them to a videogame designed to connect microbiology with Constructionist microworlds. An experimental comparison showed the learning and engagement affordances of integrating this videogame into a mixed-media bioengineering curriculum. Elementary-aged children (N = 17) participated in a 9-hour learning intervention, with one group of n = 8 children receiving the BacToMars videogame and the other group (n = 9) receiving traditional learning activities on the same content. Pre- and post-surveys and interview data were collected from both groups. Contribution: This paper contributes to education research on children’s ability to meaningfully engage with abstract concepts at the intersection of science and engineering through bioengineering education, and to design research on developing educational technology for introducing bioengineering content to elementary school children. Findings: Children in both groups showed improved knowledge and attitudes related to bioengineering. Children who used BacToMars showed slightly stronger performance on game-specific concepts, while children in the control condition showed slightly higher generalized knowledge of bioengineering concepts. Recommendations for Practitioners: Practitioners should consider bioengineering as a domain for meaningful, interdisciplinary learning in elementary education.. Recommendation for Researchers: Design researchers should develop playful ways to introduce bioengineering concepts accurately and to engage children’s imaginations and problem-solving skills. Education researchers should further investigate developmentally appropriate ways to introduce bioengineering in elementary education. Impact on Society: BacToMars introduces a meaningful scenario to contextualize complex con-cepts at the intersection of science and engineering, and to engage children in real-world, interdisciplinary problem solving. Future Research: Future research should explore BacToMars and bioengineering curricula for elementary-aged children in larger samples, with longer intervention times.

Aim/Purpose: The current study examines the impact of an intervention program to train teachers to collaborate with their students while creating digital games. Background: Teachers seem unable to leverage the potential of ICT to present students with a rich learning environment. ICT integration is usually at a relatively simple and concrete level without changing the traditional teacher-student paradigm. Methodology: The study is both quantitative and qualitative. Participants were 63 active teachers studying in the M.Ed. program at a teacher education college. The teachers responded to a series of pre- and post-questionnaires and wrote a concluding reflection. Contribution: Teaching based on creating digital games, combined with teacher-class collaboration, is a viable and real alternative of constructivist teaching, adapted to different learners. Findings: The SEM path analysis showed that it was only after the intervention that the lower the teachers’ resistance to changing teaching patterns, the higher their intrinsic motivation to learn an innovative pedagogical-technological program and likewise the sense of mastery of 21st-century skills, resulting in a positive attitude towards classroom collaboration. The qualitative findings reveal eight categories dealing with two main themes: the first is professional development, including conceptual, behavioral and emotional change, and the second is the teachers’ perception of the learners. Recommendations for Practitioners: Teacher training should be ongoing in order to change teaching-learning processes and promote an active approach based on constructive principles, 21st-century skills and collaboration between teachers and students in a computer environment. Recommendation for Researchers: Future studies should start by sampling teachers and education professionals who have convenient access to technology in their teaching-learning environment. Impact on Society: Collaboration between teachers and students in creating learning games in a computer environment and teacher-class collaboration, in general, require very different training than that which exists today. Hence there should be some rethinking of teacher training. The proposed pedagogical model is one such idea in the right direction. Future Research: A larger study with a greater number of participants, including a control group, should be conducted.

Aim/Purpose: The study seeks to utilize Augmented Reality (AR) in creating virtual laboratories for engineering education, focusing on enhancing teaching methodologies to facilitate student understanding of intricate and theoretical engineering principles while also assessing engineering students’ acceptance of such laboratories. Background: AR, a part of next-generation technology, has enhanced the perception of reality by overlaying virtual elements in the physical environment. The utilization of AR is prevalent across different disciplines, yet its efficacy in facilitating Science, Technology, Engineering, and Mathematics (STEM) education is limited. Engineering studies, a part of STEM learning, involves complex and abstract concepts like machine simulation, structural analysis, and design optimization; these things would be easy to grasp with the help of AR. This restriction can be attributed to their innovative characteristics and disparities. Therefore, providing a comprehensive analysis of the factors influencing the acceptance of these technologies by students - the primary target demographic – and examining the impact of these factors is essential to maximize the advantages of AR while refining the implementation processes. Methodology: The primary objective of this research is to develop and evaluate a tool that enriches the educational experience within engineering laboratories. Utilizing Unity game engine libraries, digital content is meticulously crafted for this tool and subsequently integrated with geo-location functionalities. The tool’s user-friendly interface allows both faculty and non-faculty members of the academic institution to establish effortlessly the virtual laboratory. Subsequently, an assessment of the tool is conducted through the application of the Unified Theory of Acceptance and Use of Technology (UTAUT2) model, involving the administration of surveys to university students to gauge their level of adaptability. Contribution: The utilization of interactive augmented learning in laboratory settings enables educational establishments to realize notable savings in time and resources, thereby achieving sustainable educational outcomes. The study is of great importance due to its utilization of student behavioral intentions as the underlying framework for developing an AR tool and illustrating the impact of learner experience on various objectives and the acceptance of AR in Engineering studies. Furthermore, the research results enable educational institutions to implement AR-based virtual laboratories to improve student experiences strategically, align with learner objectives, and ultimately boost the adaptability of AR technologies. Findings: Drawing on practice-based research, the authors showcase work samples and a digital project of AR-based Virtual labs to illustrate the evaluation of the adaptability of AR technology. Adaptability is calculated by conducting a survey of 300 undergraduate university students from different engineering departments and applying an adaptability method to determine the behavioral intentions of students. Recommendations for Practitioners: Engineering institutions could leverage research findings in the implementation of AR to enhance the effectiveness of AR technology in practical education settings. Recommendation for Researchers: The authors implement a pragmatic research framework aimed at integrating AR technology into virtual AR-based labs for engineering education. This study delves into a unique perspective within the realm of engineering studies, considering students’ perspectives and discerning their behavioral intentions by drawing upon previous research on technology utilization. The research employs various objectives and learner experiences to assess their influence on students’ acceptance of AR technology. Impact on Society: The use of AR in engineering institutions, especially in laboratory practicals, has a significant impact on society, supported by the UTAUT2 model. UTAUT2 model assesses factors like performance, effort expectancy, social influence, and conditions, showing that AR in education is feasible and adaptable. This adaptability helps students and educators incorporate AR tools effectively for better educational results. AR-based labs allow students to interact with complex engineering concepts in immersive settings, enhancing understanding and knowledge retention. This interactive augmented learning for laboratories saves educational institutions significant time and resources, attaining sustainable learning. Future Research: Further research can employ a more comprehensive acceptance model to examine learners’ adaptability to AR technology and try comparing different adaptability models to determine which is more effective for engineering students.

Aim/Purpose: Despite playing a critical role in shaping the future, 70% of undergraduate engineers report low levels of motivation. Student disengagement and a lack of ownership of their learning are significant challenges in higher education, specifically engineering students in the computer science department. This study investigates the various causes of these problems among first-year undergraduate engineers. Background: Student disengagement has become a significant problem, especially in higher education, leading to reduced academic performance, lower graduation rates, and less satisfaction with learning. The study intends to develop approaches that encourage a more interesting and learner-motivated educational environment. Methodology: This research uses a mixed methods approach by combining quantitative data from a survey-based questionnaire with qualitative insights from focus groups to explore intrinsic and extrinsic motivators, instructional practices, and student perceptions of relevance and application of course content. The aim of this method is to make an all-inclusive exploration into undergraduate engineering students’ perspectives on factors contributing to this disengagement and the need for more ownership. Contribution: Inculcating passion for engineering among learners seems demanding, with numerous educational programs struggling with issues such as a lack of interest by students and no personal investment in learning. Understanding the causes is of paramount importance. The study gives suggestions to help teachers or institutions create a more engaged and ownership-based learning environment for engineering students. Findings: The findings revealed a tangled web influencing monotonous teaching styles, limited opportunities and applications, and a perceived gap between theoretical knowledge and real-world engineering problems. It emphasized the need to implement more active learning strategies that could increase autonomy and a stronger sense of purpose in their learning journey. It also highlights the potential use of technology in promoting student engagement and ownership. Further research is needed to explore optimal implementation strategies for online simulations, interactive learning platforms, and gamification elements in the engineering curriculum. Recommendations for Practitioners: It highlights the complex interplay of intrinsic and extrinsic motivation factors and the need to re-look at instructional practice and emphasize faculty training to develop a more student-centered approach. It also stresses the need to look into the relevance and application of the course content. Recommendation for Researchers: More work needs to be done with a larger, more diverse sample population across multiple institutions and varied sociocultural and economic backgrounds. Impact on Society: Enhancing learners’ educational experience can result in creating a passionate and competent team of engineers who can face future obstacles fearlessly and reduce the production of half-baked graduates unprepared for the profession’s challenges. Future Research: Conduct long-term studies to assess the impact of active learning and technology use on student outcomes and career readiness. Investigate scaling up successful strategies across diverse engineering programs. See if promising practices work well everywhere.

Aim/Purpose: This study explores the subject structure, social networks, research trends, and issues in the domain that have the potential to derive an overview of the development of virtual reality-based learning media in vocational education. Background: Notwithstanding the increasingly growing interest in the application of virtual reality in vocational learning, the existing research literature may still leave out some issues necessary for a comprehensive understanding. This study will point out such areas that need more exploration and a more comprehensive synthesis of the literature by conducting a bibliometric analysis. It will be interesting to keep track of the changing concepts and methodologies applied in the development of VR-based learning media in vocational education research. Methodology: This review was carried out using bibliometric methodology, which can highlight patterns of publication and research activity in this hitherto little studied area. The results of the study have the potential to lead to evidence-based priority in VR development, which will tailor work for vocational contexts and set the compass against the growing worldwide interest in this area. The study provides a descriptive analysis of publications, citations, and keyword data for 100 documents published between the years 2013 and 2022 from the Scopus database, which is conducted to illustrate the trends in the field. Contribution: This study also counts as a contribution to understanding the research hotspots of VR-based learning media in vocational education. Through bibliometric analysis, this study thoroughly summarized the relevant research and literature laying a knowledge foundation for researchers and policy makers. Additionally, this analysis identified knowledge gaps, recent trends, and directions for future research. Findings: The bibliometric analysis revealed the following key findings: 1. A growing publication trajectory, with output increasing from 7 articles in 2013 to 25 articles in 2022. 2. The United States led the contributions, followed by China, and Germany. 3. The most prominent authors are affiliated with American medical institutions. 4. Lecture proceedings include familiar sources that reflect this nascent domain. 5. Citation analysis identified highly influential work and researchers. 6. Keyword analysis exposed technology-oriented topics rather than learning-oriented terms. These findings present an emerging landscape with opportunities to address geographic and pedagogical research gaps. Recommendations for Practitioners: This study will be beneficial for designers and developers of VR-based learning programs because it aligns with the most discussed and influential VR technologies within the literature. Such an alignment of an approach with relevant research trends and focus can indeed be very useful for the effective application and use of VR-based learning media for quality improvements in vocational students' learning. Recommendation for Researchers: In fact, in this bibliometric review of VR integration within vocational classrooms, a future call for focused research is presented, especially on teaching methods, course design, and learning impact. This is a framework that seeks to establish its full potential with effective and integrated use of VR in the various vocational curricula and settings of learners. Impact on Society: From the findings of the bibliometric analysis, it is evident that virtual reality technologies (VR) have significantly led to transformation within educational media. There is no denying that the growing interest and investment in the integration of virtual reality into vocational education has been well manifested in the substantive increase in publications in the last decade. This shows what the innovation driving factor is in the United States. At the same time the rapid contributions from China signal worldwide recognition of the potential of VR to improve technical skills training. This study points the way for more research to bridge critical gaps, specifically how VR tools can be used in vocational high school classrooms. Furthermore, research should be aligned to meet specific needs of vocational learners and even promote international cross-border partnerships, pointing out the potential of virtual reality to be a universally beneficial tool in vocational education. The examination of highly cited articles provides evidence of the potential of VR to be an impactful pedagogical tool in vocational education. The findings suggest that researchers need to move forward looking at the trajectory of VR in vocational education and how promising it is in defining the future for innovative and effective learning methodologies. Future Research: This study is an exceptionally valuable contribution, a true landmark in the field of dynamic development, and one that denotes very meaningful implications for the future course of research in the dynamically developing field of bibliometric analysis of VR-based learning media for vocational education. The increase in the number of publications emanates from growing interests in the application of virtual reality (VR) technologies in vocational education. The high concentration of authorship from the USA, along with the ever increasing contributions from China, spotlights the increasing worldwide recognition of the impact of immersive technologies in the enhancement of training in technical skills. These are emerging trends that call for research to exemplify the diverse views and global teamwork opportunities presented by VR technologies. The study also highlights critical areas that need focused attention in future research endeavors. The fact that the embedding of VR tools into classrooms in vocational high schools has been poorly researched points to the major gap in pedagogical research within authentic educational settings. Therefore, further investigations should evaluate teaching methods in VR, lesson designs, and the impacts of VR in specific vocational trades. This supports the need for learner-centered frameworks that are tailor-made to the needs of vocational learners. This calls for more direct and focused investigations into identified research gaps noting a growing dominance in the field of health-related research with the most cited articles in this field, to integrate virtual reality into additional vocational education contexts. In this way, the gaps present an opportunity for researchers to make significant contributions to the development of interventions responsive to the unique needs of vocational learners; this will contribute to strengthening the evidence base for the worldwide implementation of VR within vocational education systems. This was recommended as the intention of such a bibliometric analysis: supporting the potential of VR as a pedagogical tool in vocational contexts and providing grounding for a strong and focused future research agenda within this burgeoning area of educational technology.

Badminton, as a fast and highly technical sport, requires high accuracy in identifying athletes' swing movements. Accurately identifying different swing movements is of great significance for technical analysis, coach guidance, and game evaluation. To improve the recognition accuracy of badminton players' swing movements, this text is based on an improved dense trajectory algorithm to improve the accuracy of recognising badminton players' swing movements. The features are efficiently extracted and encoded. The results on the KTH, UCF Sports, and Hollywood2 datasets demonstrated that the improved algorithm achieved recognition accuracy of 94.2%, 88.2%, and 58.3%, respectively. Compared to traditional methods, the innovation of research lies in optimised feature extraction methods, efficient algorithm design, and accurate action recognition. These results provide new ideas for the research and application of badminton swing motion recognition.

This study examines the relationships between ICTs (e.g., chatbots, virtual assistants, social media platforms, e-mail marketing, mobile marketing, data analytics, interactive voice response, big data analytics, push notifications, cloud computing, and augmented reality) and e-customer relationship management (e-CRM) from the banking industry of China. Similarly, this study unfolds the moderation interference of trust and risk between the association of ICTs and e-CRM, respectively. The study provided a positive nexus between ICTs and e-CRM. On the other side, a significant moderation of trust, as well as financial risk was observed between the correlation of ICTs and customer relationship management. This study endows with insights into ICTs which are critical for achieving e-CRM by streamlining interactions and enhancing their experience. Similarly, trust and financial risk were observed as potential forces that sway the association between ICTs and e-CRM.

Human behaviour, which is led by the human, emotional and occasionally fallible brain, is highly influenced by the environment in which choices are presented. This research paper explores the synergistic potential of the Internet of Behaviours (IoB) and digital nudges in the financial sector as new avenues for intervention while shedding light on the IoB benefits and the digital nudges' added value in these financial settings. Afterward, it proposes an IoB-Nudges conceptual model to explain how these two concepts would be incorporated and investigates their complementary relationship and benefits for this sector. Finally, the paper also discusses key challenges to be addressed by the IoB framework.

This paper describes the FISHNet project, which developed a repository environment for the curation and sharing of data relating to freshwater science, a discipline whose research community is distributed thinly across a variety of institutions, and usually works in relative isolation as individual researchers or within small groups. As in other “small sciences”, these datasets tend to be small and “hand-crafted”, created to address particular research questions rather than with a view to reuse, so they are rarely curated effectively, and the potential for sharing and reusing them is limited. The paper addresses a variety of issues and concerns raised by freshwater researchers as regards data sharing, describes our approach to developing a repository environment that addresses these concerns, and identifies the potential impact within the research community of the system.

Open data is becoming increasingly important in research. While individual researchers are slowlybecoming aware of the value, funding agencies are taking the lead by requiring data be made available, and also by requiring data management plans to ensure the data is available in a useable form. Some journals also require that data be made available. However, in most cases, “available upon request” is considered sufficient. We describe a number of historical examples of data use and discovery, then describe two current test cases at the University of New Mexico. The lessons learned suggest that an instituional data services program needs to not only facilitate fulfilling the mandates of granting agencies but to realize the true value of open data. Librarians and institutional archives should actively collaborate with their researchers. We should also work to find ways to make open data enhance a researchers career. In the long run, better quality data and metadata will result if researchers are engaged and willing participants in the dissemination of their data.

International universities are changing with their style of operation, mode of teaching and learning operations. This change is noticeable rapidly in India and also in international contexts due to healthy and innovative methods, educational strategies, and nomenclature throughout the world. Technologies are changing rapidly, including ICT. Different subjects are developed in the fields of IT and computing with the interaction or applications to other fields, viz. health informatics, bio informatics, agriculture informatics, and so on. Agricultural informatics is an interdisciplinary subject dedicated to combining information technology and information science utilisation in agricultural sciences. The digital agriculture is powered by agriculture informatics practice. For teaching, research and development of any subject educational methods is considered as important and various educational programs are there in this regard viz. Bachelor of Education, Master of Education, PhD in Education, etc. Degrees are also available to deal with the subjects and agricultural informatics should not be an exception of this. In this context, Doctor of Education (EdD or DEd) is an emerging degree having features of skill sets, courses and research work. This paper proposed on EdD program with agricultural informatics specialisation for improving healthy agriculture system. Here, a proposed model core curriculum is also presented.

The paper reviewed the emerging roles of the 21st century librarians, charged with the responsibility to manage repository services across libraries in present-day information technology environment. Librarians need to be trained and empowered with requisite skills and knowledge needed for successful management of the ICT driven repository initiatives that the 21st century demands. Literature was reviewed on the roles and responsibilities of librarians, training needs and opportunities, career path and recruitment of librarians, and community support necessary for effective and efficient implementation and management of repository initiatives. This entails the ability to comprehend trends and change patterns which are essential for providing research focused and user-friendly models in open repository services that are based on thorough analytical understanding of the challenges of emerging trends. To achieve this requires the training and retraining of librarians to reposition them as information specialists in their career path. The role of the library as an integral part of its social environment is to educate the community about the existence of an open repository by building partnership with community-oriented research centres through seminars, workshops, symposium, training, and awareness programmes. The study recommends that librarians should strategize and collaborate with researchers to make open repository an essential research tool.

Aim/Purpose: This paper investigates the changing paradigms for technical skills that are needed by Data Engineers in 2018. Background: A decade ago, data engineers needed technical skills for Relational Database Management Systems (RDBMS), such as Oracle and Microsoft SQL Server. With the advent of Hadoop and NoSQL Databases in recent years, Data Engineers require new skills to support the large distributed datastores (Big Data) that currently exist. Job demand for Data Scientists and Data Engineers has increased over the last five years. Methodology: This research methodology leveraged the Pig programming language that used MapReduce software located on the Amazon Web Services (AWS) Cloud. Data was collected from 100 Indeed.com job advertisements during July of 2017 and then was uploaded to the AWS Cloud. Using MapReduce, phrases/words were counted and then sorted. The sorted phrase / word counts were then leveraged to create the list of the 20 top skills needed by a Data Engineer based on the job advertisements. This list was compared to the 20 top skills for a Data Engineer presented by Stitch that surveyed 6,500 Data Engineers in 2016. Contribution: This paper presents a list of the 20 top technical skills required by a Data Engineer.

Aim/Purpose: The study describes empirical research into agile Requirements Engineering (RE) practices based on an analysis of data collected in a large higher education organization. Background: Requirements Engineering (RE) in agile development contexts is considerably different than in traditional software development. The field of agile RE is still nascent where there is a need to evaluate its impact in real-world settings. Methodology: Using a case study methodology, the study involved interviewing nine experienced software practitioners who reflected on the use and implementation of various agile RE practices in two software development projects of a student management system. Contribution: The primary contribution of the paper is the evaluation of agile RE practices in a large tertiary educational organization. Based on the analysis of the data, it provides valuable insights into the practice of agile RE in a specific context (i.e., education), but just as importantly, the ones that were omitted or replaced with others and why. Findings: While the evolutionary and iterative approach to defining requirements was followed in general, not all agile practices could be fully adhered to in the case organization. Although face-to-face communication with the customers has been recognized as one the most important agile RE practices, it was one of the most difficult practices to achieve with a large and diverse customer base. Addressing people issues (e.g., resistance to change, thinking, and mindset) was found to be a key driver to following the iterative RE process effectively. Contrary to the value-based approach advocated in the literature, the value-based approach was not strictly adhered to in requirements prioritization. Continuous integration was perceived to be a more beneficial practice than prototyping, as it allows frequent integration of code and facilitates delivering working software when necessary. Recommendations for Practitioners: Our study has important implications for practitioners. Based on our empirical analysis, we provide specific recommendations for effective implementation of agile RE practices. For example, our findings suggest that practitioners could address the challenges associated with limited face-to-face communication challenges by producing flexible, accessible, and electronic documentation to enable communication. Recommendations for Researchers: Researchers can use the identified agile RE practices and their variants to per-form in-depth investigations into agile requirements engineering in other educational contexts. Impact on Society: There are a number of new technologies that offer exciting new opportunities that can be explored to maximize the benefits of agile and other requirements techniques. Future Research: Future research could conduct case studies in different contexts and thus con-tribute to developing bundles or collections of practices to improve software development processes in specific contexts.

Aim/Purpose: Digital literacy is critical to participation in a contemporary knowledge-based society and is requisite to both academic success and career development. Institutions of higher education have been slow to define, assess, and amplify digital literacy in parallel with advances in the enhancement of reading, writing, and arithmetic literacy. Perhaps as a consequence of the pandemic, awareness appears to be growing of the need to infuse digital literacy at both institutional and individual levels. The purpose of this paper is to investigate the promotion and amplification of digital literacy within top universities around the globe. Background: For years, the role of higher education in the amplification of digital literacy among college students has been debated, but efforts have been limited primarily to ad hoc, unsystematic attempts to rectify disparities between students’ exposure and understanding. The impacts of COVID-19 exposed the reality that many institutions, professors, and college students were under-prepared for the surge in reliance on digital technologies. Methodology: This paper explores the prevalence of digital literacy in the top public and private universities around the globe by conducting a qualitative examination on compulsory requirements, digital literacy offerings, university identified digital literacy initiatives, and university strategic plans. Contribution: This paper contributes to the body of knowledge by providing evidence for the need to expand the constructs of what it means to be digitally literate to address the ever-expanding range of emerging technologies and the impact of those technologies on society. Findings: The review of digital literacy amplification at top universities showed that none of the universities' admissions requirements required students to demonstrate digital competence and compulsory digital literacy was uncommon. However, a majority of universities undertook some form of initiative to promote digital literacy. These initiates included a focus on developing digitally literate society and workforce or developing innovative approaches to digital literacy education. Recommendations for Practitioners: The pandemic has generated a greater sense of urgency for institutions of higher education to ensure access to and understanding of digital technologies by students, faculty, and staff. Educational institutions will have to adapt their methodologies to promote explicit and intentionally reasoned digital literacy strategies that combine the competencies possessed by users of technology with the generation of new competencies required to successfully participate in the digital transformation of education, business, and society. Recommendations for Researchers: This paper examined the top 50 universities around the globe. Additional re-search is needed to examine national, regional and local efforts in the quest to address the need for a digitally literate citizenry. Impact on Society: COVID-19 has thrust us into a new normal wherein digital competence is foundational to success in an ever digitally reliant world. Institutions of higher education are best positioned to carry out the initiatives, programs and re-search needed to enhance the digital literacy of all citizens, not just students and employees. Future Research: Societal impacts of the COVID-19 pandemic continue to emerge and will resonate for decades to come. Continued investigation, exploration and dis-semination of information related to effort to enhance and amplify digital literacy is necessary to ensure momentum to reimagine digital literacy education is maintained.

Aim/Purpose. This study examined the self-perception of adolescents and young people aged 17-21 – how they perceived their personal characteristics, self-image, vitality, belonging to a local and global (glocal) society, happiness index and activity, media usage habits in general and smartphones in particular – in other words, it sought to produce a sketch of their character. Background. Different age groups are influenced by various factors that shape them, including living environment, technological developments, experiences, common issues, events of glocal significance, and more. People belonging to Gen Z were born at the end of the previous century and the beginning of the 21st century (up to 2010). This generation was born into the digital technological age and is the first one born into the environment defined by smartphones, and social media. Its members are referred to as “digital natives” because they were born after the widespread adoption of digital technology in the Western world. They entered an environment characterized by the widespread daily use of smartphones, the Internet, and technology in general. Methodology. This was a quantitative study based on a sample of 418 Israeli adolescents and young people aged 17-21. The following questionnaires were administered anonymously and disseminated online to an audience of youths aged 17-21 across Israel: A demographic questionnaire; Self-esteem; Vitality; Belonging vs. alienation; Social-emotional aspects; Usage habits in digital environments; Usage habits of learning on a smartphone; Open questions. Contribution. The current study tried to define clusters to characterize adolescents and youth aged 17-21. Findings Results show that study participants had high self-esteem and vitality, felt be-longing, happy, and satisfied with their life, and perceived themselves as active and enterprising at an average level or above. The study identified two clusters. Participants in Cluster 1 were characterized by higher parameter averages than those in Cluster 2 on the self-image, vitality, belonging, happiness, and activism scales. Participants in Cluster 1 felt that using a smartphone made life easier, helped them solve everyday problems, made everyday conduct easier, and allowed them to express themselves, keep up to date with what is happening with their friends, disseminate information conveniently, be involved in social life, and establish relationships with those around them. They thought that it was easy to collaborate with others and to plan activities and events. Recommendations for Practitioners. When examining cluster correlations with data in relation to other variables, it is apparent that participants in Cluster 1 had more options to reach out for help, report more weekly hours spent talking and meeting with friends and feel that using a smartphone makes everyday life easier and facilitates their day-to-day conduct than did participants in Cluster 2. The smartphone allows them to express themselves, keep updated regarding what is happening with their friends and disseminate information easily, helps them be involved in social life and establish connections with those around them. They find it easy to communicate and cooperate with others and to plan activities and events. By contrast, participants in Cluster 2 felt that the smartphone complicates things for them and creates problems in their daily lives. They feel that the use of social networks burdens them and that the smartphone prevents them from being more involved in their social life, and from establishing relationships with those around them. They felt that communication by smartphone creates more problems in understanding messages. Recommendations for Researchers. One of the challenges of this generation is forming an independent identity and self-regulation in a digital, global, across-the-border era that offers a variety of possibilities and communities. They must examine the connection between the digital and personal spaces, to be able to enjoy virtual communities and a sense of togetherness, and at the same time maintain privacy, autonomy, and individuality. Many studies point to the blurring of boundaries between the private-personal and the public, at numerous problems in social networks, including social problems, shaming, and exclusion from various groups and activities. The fear of shaming and the desire to keep up with everything that is happening create a state of mental stress, and adolescents often feel that they urgently need to check their smartphones. Sharing with others can help them deal with negative content and experiences and avoid the dangers lurking in their web surfing. Yet sharing, especially with friends, often causes intimate content to become public and leads to shaming and invasion of privacy. Impact on Society. Gen Z was born into an environment where smartphones, the Internet, and technology in general, are widely used in everyday routine, and they make extensive use of technological means in all areas of life. One of the characteristics of this generation is “globalization.” The present study showed that about 84% of participants felt to a moderate degree or higher that they were citizens of the world. Future Research. The findings of this study revealed a significant difference in self-image between males and females. An attempt was made to explain the findings in light of previous studies, but the need arose for studies on the self-image of young people of Gen Z that would shed light on the subject.

Aim/Purpose . The present study aimed to understand in depth the experience of identity formation of beginning teachers (BTs), members of Gen Y, in their first year at elementary school, teaching students of Gen Alpha, from the perspective of BTs and their teacher mentors (TMs). Background. The purpose of the study was to compare the aspects described by BTs and their mentor teachers of the initial experience of teaching and of shaping the professional identity of BTs, members of Gen Y, in elementary schools, from the perspective of BTs and teacher mentors (TMs). Methodology. This was a qualitative study. Two groups participated in the study: (a) 75 BTs, members of Gen Y, and (b) 40 mentors of beginning teachers. Contribution. The findings of this study indicate that the creation of an emotionally and professionally supportive community led to a fruitful discussion on issues related to the process of absorption and integration of BTs in the school. This process advanced their professional development, expanding knowledge, abilities, strategies, and innovative pedagogical practices for classroom management, and meaningful teaching and learning in the classroom. The supportive community provided an emotional, professional, social-organizational, and evaluative-reflective response to the needs of BTs, facilitating meaningful interactions between the BTs and their students. It created for students a space for emotional training, organizing and managing behavior, regulating emotions and behavior, reducing feelings of anger, and arousing a feeling of optimism. Findings. The findings show that there was a conflict between the BTs’ and TMs’ perceptions of school reality. The mentors expected the BTs to adapt to the existing system, whereas the BTs perceived the process as one of formation of their identity as teachers. It turned out that parameters that were important to Gen Y teachers, such as knowing the school organization and being an influential factor that brings about change, were less important to their mentors. The findings of the present study reinforce those of previous studies that investigated the employment characteristics of Gen Y. Recommendations for Practitioners. A supportive community at school is likely to increase the level of mental well-being of Gen Y teachers. To this end, support communities of teachers by form and by discipline of study should be created. In the community, emphasis should be placed on reflection and mental resilience in all situations and challenging events that happen to the BTs to help them cope with the accumulated stress. Recommendations for Researchers. Students need a sensitive environment that is appropriate for Gen Alpha children. This environment must allow for emotional training and regulation, behavior organization and management to arouse a feeling of optimism and reduce anger. To develop students’ emotional, social, and cognitive abilities, teachers must teach with love, sensitivity, affectivity, and empathy. Impact on Society. To retain BTs and prevent them from quitting their career, schools must ensure that members of Gen Y understand the school organization and are satisfied with the way the organization is managed. They must have a sense of being significant partners in the life of the school. Under optimal working conditions, Gen Y teachers may greatly contribute to the values of education and equal opportunity, maximizing the personal potential of each student and the classroom as a whole, and making the school relevant. Future Research. Future studies should examine the characteristics of students belonging to Gen Alpha. One of the difficulties mentioned by BTs was a misunderstanding of the characteristics of Gen Alpha, which created problems in the interactions within the teaching staff and between the teachers and the students, and pre-vented gaining authority with other teachers and with students.