One of the major lunar events India is going to witness this week is a Pink Super Moon. This appearance of the moon is considered as the brightest and the biggest.

Did you miss last month's Pink Supermoon? Don’t worry! You can witness another supermoon today.

Social media giant Facebook is now rolling out its biggest update for desktop users, after first announcing it at its F8 developer conference last year.

Mock test paper for CA exams 2020: In the view of Coronavirus pandemic, the Board of Studies of ICAI will be commencing the Mock Test Papers (Series-1) online this month.

Quebec held two draws in October and issued 162 invitations to apply to the aspirants in the Quebec Skilled Worker Program. A Gradual ProgressFirstly, On October 23, it invited 89 persons to meet the labor market requirements. Also, the Candidates…

On November 26th British Columbia held a draw and has extended 348 invitations to Skilled Workers as well as International Graduates in its new Provincial Nominee Program. The draw covered five provincial streams. These Skilled workers of the provincial…

The immigration authorities in Ontario held their largest draw on December 11th4wsqor 2019, and issued 667 Notifications of Interest to such candidates who had a profile in Express Entry Pool. This was the first draw in the Skilled Trades stream after…

Prime Minister Justin Trudeau assigned the twin tasks to Marco Mendicino, the Immigration Minister. These are Management of a million new arrivals seeking permanent residents as well as creating a fresh Municipal Nominee Program.Well Defined ResponsibilitiesThe…

Nova Scotia held a draw in the Labor Market Priorities stream on December 20 and invited 144 candidates belonging to the Express Entry having the required work experience related to public relations, advertising, or marketing sectors. The category of…

Saskatchewan has invited 595 candidates belonging to Express Entry and Occupations In-Demand categories to seek the provincial nomination for permanent residence in Canada.Making a Fine ProgressOn December 20 a draw was held for The Saskatchewan Immigrant…

On January 9th, Ontario conducted a draw for the first time after May 2019 in the French-Speaking Skilled Worker stream that is linked to Express Entry. The draw in Ontario Immigrant Nominee Program issued 242 Notifications of Interest.The qualifying…

The immigration officials of Saskatchewan issued 308 invitations that target 82 NOC codes in the first skilled worker draw for Expression of Interest draw in the present year on January 9th. This draw was held in Saskatchewan Immigrant Nominee Program…

British Columbia invited 70 candidates in the initial BC PNP Tech Pilot draw for the present year on January 14th.  It issued invitations through four streams of the British Columbia Provincial Nominee Program as mentioned below:SI – Skilled Workers…

Prince Edward Island held the first draw for the year on January 16th and has issued 123 invitations to immigration candidates.Forward looking ProgramThe PEI Provincial Nominee Program invited the candidates in the Labor Impact, and Business Impact class…

Canadian Immigration authorities are beginning the issuing process at a great pace. In an Express Entry draw conducted on January 22, 2020, they issued 3,400 Invitations to Apply. The CRS score had a decline of two points in comparison to the draw held…

150 invitations were issued to Express Entry candidates to apply and seek the Alberta provincial nomination on January 9. The Candidates having a 350 CRS score received these NOIs.Through the Alberta Express Entry Stream the Alberta Immigrant Nominee…

British Columbia conducted an Entrepreneur Immigration draw and issued 25 invitations to candidates belonging to two streams on January 14th.This draw of British Columbia Provincial Nominee Program had 18 invitations in General Entrepreneur stream as…

The latest details of the recently launched Maharajas’ Express winter itineraries are the new update on the Indian Luxury Trains website. Maharajas’ Express, dubbed as India’s answer to the Orient Express, has announced its winter itineraries across the choicest of...

Kapil Mishra is a former Aam Aadmi Party (AAP) leader-turned BJP candidate for the Delhi election. When he was with the AAP, Mr Mishra was elected from Delhi's Karawalnagar seat in the 2014 Delhi...

Arvinder Singh Lovely is a Congress leader who had walked out of his party in 2017 to join the BJP. He returned to the Congress in February 2018. Mr Lovely, who has been the Delhi Education Minister...

Satyendar Jain is an Aam Aadmi Party (AAP) leader and a minister in Arvind Kejriwal's cabinet. He holds multiple portfolios including the Health Ministry.

Dharampal Lakra of the Aam Aadmi Party (AAP) is the richest candidate in Delhi. He has declared wealth of close to Rs 300 crore.

Krishna Tirath, a union minister in the United Progressive Alliance (UPA) government, is the Congress's candidate from Patel Nagar. The leader had rejoined the Congress last year after being a BJP...

Aam Aadmi Party (AAP) leader Raghav Chadha, party's candidate from central Delhi's Rajinder Nagar, is pitted against BJP veteran RP Singh, a 58-year-old advertising professional from the same...

Mumbai Police drew inspiration from a topic that has been trending all over social media - the name of Elon Musk's newborn baby boy - to devise a brainteaser with an important message.

Google has already rolled out a few updates to Duo since the COVID-19 pandemic hit. Since video chat is more important than ever, Google is making Duo a priority, bring its video chat up to parity with its biggest competitors.This latest update packs in new AR effects which always make video calls a bit more ...

Which high school football prospects could be the next big-time college football players?

New federal regulations announced by the U.S. Department of Education change how colleges must respond to sexual assault and harassment complaints, giving more rights to accused students and lessening reporting mandates for employees, including coaches.

PCI-SIG DevCon 2019 APAC tour has come to Tokyo and Taipei this year. The focus is predominantly around the latest updates for PCIe Gen 5 which its version 1.0 specification was just released this year in May.  A series of presentations provided by PCI-SIG on the day 1 with comprehensive information covering all aspects of Gen 5 specification, including protocol, logical, electrical, compliance updates. On the day 2 (only in Taipei), several member companies shared their view on Testing, PCB analysis and Signal integrity. The exhibit is also another spotlight of this event where the member companies showcased their latest PCIe solutions.

Presentation Track (Taipei), Exhibit (Tokyo), Exhibit (Taipei) 

Cadence, as the market leading PCIe IP vendor, participated APAC tour this year with bringing in its latest PCIe IP solution offering (Gen 5/4) to the region as well as showcasing two live demo setups in the exhibit floor. One setup is the PCIe software development kit (SDK) while the other is the Interop/compliance/debug platform. Both come with the Cadence PCIe Gen 4 hardware setup and its corresponding software kit.

The SDK can be used for Device Driver Development, Firmware Development, and for pre-silicon emulation as well. It supports Xtensa and ARM processor with Linux OS and it also equip with Ethernet interface which can be used for remote debugging. It also supports PCIe stress tests for Speed change, link enable/disable, entry/exist for lower power states, …etc. 

Cadence PCIe 4.0 Software Development Kit

The “System Interop/Compliance/Debug platform” was set up to test with multiple endpoint and System platforms. This system come with integrated Cadence software for basic system debug without the need for analyzer to perform the analysis, such as LTSSM History, TS1/TS2 transmitted/received with time stamp, Link training phases, Capturing Packet errors details, Capturing PHY TX/RX internal state machine details, ...etc.

Cadence PCIe System Interop/Compliance/Debug Platform

The year 2019 is certainly a "fruitful year" for the PCIe as more Gen 4 products are now available in the market, Gen 5 v1.0 specification got officially ratified, and PCI-SIG's revealing of Gen 6 specification development. We were glad to be part of this APAC tour with the chance to further introduce Cadence’s complete and comprehensive PCIe IP solution.

See you all next year in APAC again!

More Information

For more information on Cadence's PCIe IP offerings, see our PCI Express page.

For more information on PCIe in general, and on the various PCI standards, see the PCI-SIG website.

Related Posts

• Blog: Did You “Stress Test” Yet? Essential Step to Ensure a Quality PCIe 4.0 Product
• Blog: PCIe Gen4: It’s Official, We’re Compliant
• Blog: PCIe 3.0 Still Shines While PCIe Keeps Evolving
• Blog: The PCIe 4.0 Era Continues at PCI-SIG Developers Conference 2016

I've redesigned a custom TO220FLAT Package

First I created a TO220shape.ssm  with PCB Editor. Then I created a surface mount T220build.pad in Padstack Editor using TO220shape.ssm. Then I created a TO220FLAT.psm in PCB Editor. I placed 3 Connect pins and 9 Mechanical pins for the TO220 TAB, using standard through-hole pads for better current handling.

Adding those Mechanical pins created many DRC errors caused by the proximity of those pads attached to the TO220shape.

Thru Pin to SMD Pin Spacing (-200.0 0.0) 5 MIL OVERLAP DEFAULT NET SPACING CONSTRAINTS Mechanical Pin "Pad50sq30d" Pin "T220build, 2"

I corrected the situation (so I though) by Waiving those DRC errors, thinking that they could not cause any problem and because that’s what I want, i.e.: 9 through-holes under the TO220 device. The idea being that when this device is mounted flat on the PCB it could carry lots of current via 9 pads that could make a good high current conductor to inner layers.

I then saved the Package and updated all related footprint schematic parts  in Capture. Created a new Netlist. Then I imported the new logic into PCB Editor to reflect that change. When the File > Import > Logic is finished I get no feedback error! (which, for me is a substantial achievement in itself)

Now, in the Design Window I see all those DRC errors popping up again, despite the fact that I waived those DRCs back in the Padstack edition. If I run a Design Rule Check (DRC) Report I will see all those DRC listed again. Now, I understand that I can go ahead and waive all those DRCs (100 in total) but I’m thinking there is got to be a better way of doing this.

Please, any advise is welcome. Thanks

Slackware Security Advisory - New mozilla-thunderbird packages are available for Slackware 14.2 and -current to fix security issues.

Slackware Security Advisory - New expat packages are available for Slackware 14.0, 14.1, 14.2, and -current to fix a security issue.

Slackware Security Advisory - New mozilla-thunderbird packages are available for Slackware 14.2 and -current to fix security issues.

Slackware Security Advisory - New libpcap and tcpdump packages are available for Slackware 14.0, 14.1, 14.2, and -current to fix security issues.

Slackware Security Advisory - New sudo packages are available for Slackware 14.0, 14.1, 14.2, and -current to fix a security issue.

Slackware Security Advisory - New python packages are available for Slackware 14.0, 14.1, 14.2, and -current to fix security issues.

Slackware Security Advisory - New mozilla-firefox packages are available for Slackware 14.2 and -current to fix security issues.

Slackware Security Advisory - New libtiff packages are available for Slackware 14.2 and -current to fix security issues.

Slackware Security Advisory - New kernel packages are available for Slackware 14.2 to fix security issues.

Slackware Security Advisory - New kernel packages are available for Slackware 14.2 to fix security issues.

Slackware Security Advisory - New bind packages are available for Slackware 14.0, 14.1, 14.2, and -current to fix a security issue.

Slackware Security Advisory - New mozilla-firefox packages are available for Slackware 14.2 and -current to fix security issues.

Slackware Security Advisory - New wavpack packages are available for Slackware 14.0, 14.1, 14.2, and -current to fix security issues.

Slackware Security Advisory - New openssl packages are available for Slackware 14.2 and -current to fix a security issue.

Slackware Security Advisory - New tigervnc packages are available for Slackware 14.2 and -current to fix security issues.

Slackware Security Advisory - New mozilla-firefox packages are available for Slackware 14.2 and -current to fix security issues.