On March 27, 2019, the joint project IDAM held its kick-off meeting in Munich, which was intended to lead the way for furthering the use of AM processes in automotive series production.

Campden BRI have begun a research project to evaluate how 3D printing could benefit the food industry.

Bushwalkers and map sellers say the decision by Geoscience Australia to stop printing and selling topographic maps will put people's safety at risk and impact on our understanding of remote Australia.

Ted Shin, the chair of the Department of Industrial Design at Metropolitan State University of Denver, could see coronavirus coming, first in China, then in Italy.

Hamlet and I have been super busy getting the first Chapter of Starfighter ready for printing - it's actually kind of a complicated process and we're both learning as we go. On the plus side, it's going to be a really nice looking volume, I think you all are really going to like it.

Also, I want to give out a HUGE thank you to everyone who ordered a t-shirt, the response was fantastic and I know Hamlet was really touched by all the supportive comments you guys left. So the pre-order is officially over, anything you order from the shop now will be shipping immediately. Did I mention how much you guys rock? -Thisbe

P.S. We got some requests for additional sizes of the Starfighter shirt so we now have a few each of the larger sizes (2X and 3X Large) in stock at the Starfighter Shop.

Reader Marvyn Lindsey found it "bizarre" that a long piece of black tape was blocking part of the book review he wanted to read.

So it is difficult to imagine who would want to stop the SARB if it would help reduce load shedding and contain further job losses.A similar argument arises in providing social houses to replace our dangerous rusty corrugated iron suburbs.

(ICFO-The Institute of Photonic Sciences) ICFO researchers report on a new method to obtain high color purity 3D objects with the use of a new class of nanoparticles.

VOLUME 294 (2019) PAGES 2555–2568Due to publisher error, “150 l/mm” was changed to “150 liters/mm” in the second paragraph of the “Vibrational spectroscopy of samples” section under “Experimental Procedures.” The correct phrase should be “150 l/mm.”

VOLUME 294 (2019) PAGES 2555–2568Due to publisher error, “150 l/mm” was changed to “150 liters/mm” in the second paragraph of the “Vibrational spectroscopy of samples” section under “Experimental Procedures.” The correct phrase should be “150 l/mm.”

The post Designing and 3D Printing At Home appeared first on SOLIDWORKS Education Blog.

When you meet someone in a professional setting, a well-designed business card helps make a lasting good impression. Here are the best business card printing services for making polished cards, even on a budget.

The European Union’s highest court said on Friday it alone has legal authority over the European Central Bank (ECB). It rejected the recent ruling in Germany questioning the ECB’s power to print money without members’ consent.
Read Full Article at RT.com

San Diego-based biotechnology company, Organovo Holdings (Organovo), has announced a tie up with a Melbourne research institute to help develop regenerative medicine in Australia.

3D printing is becoming an increasingly versatile and commercially attractive tool. The technology has many applications beyond its roots in prototyping and it is being used to create products such as clothes, cars, musical instruments and even huma...

A London hospital trust has opened a "3D printing farm" to produce 1,500 face visors a day for frontline staff.

By: Suzan Onel FDA issued a Press Release on March 28, 2020, reiterating what we all have seen in the news, there is a severe shortage of personal protective equipment (PPE) in health care facilities across the country.  In response to the shortages, FDA has issued Emergency Use Authorizations (EUAs) for respirators, ventilators, ventilator tubing

The post Shortage of PPE and other Devices During COVID-19 Pandemic – Is 3D Printing the Answer? appeared first on Kleinfeld Kaplan & Becker LLP.

John Dogru, CEO of 3DPrinterOS, spoke to MPN’s editor Laura Hughes about the pivotal role of 3D printing during the Covid-19 pandemic.

As a part of the tax conspiracy, Ronald Boyarsky assisted in paying approximately $2.6 million in commissions earned by a printing services broker to third parties, so that the broker and his companies could avoid paying taxes on the income they earned.

An Illinois commercial print broker pleaded guilty today to making false statements in a bid submitted to the U.S. Government Printing Office (GPO).

A former employee of two Massachusetts-based customer relationship management agencies that purchase direct mail advertising services was sentenced today for participating in fraud conspiracies and committing tax evasion relating to his receipt of more than $1.8 million in kickbacks.

The future is mobile as businesses dematerialize and hit the road

Scientists have created a mobile bioprinter that when filled with a patient's cells, prints skin directly into a wound.

Kris De Decker questions some of our most cherished assumptions.

Teams operating in remote sites on military or humanitarian missions can be stalled by broken equipment. They could soon be turning their own wastes into raw materials for 3D printing parts needed to get their job done.

It was more about evolution than revolution as printers get cheaper and easier to use.

A 3D printing startup in Mumbai has been accused of not fulfilling its part of the deal in a crowdfunded project initiated by a Delhi-based content creator to provide equipment to frontline health workers.

In March, Kusha Kapila contacted Boson Machines (BM) to provide 3D printed face shields for medical personnel at an initially agreed price of R150, by raising Rs 900,000 on Ketto.

With an industry standard yet to emerge, there were a lot of debates between Kapila and BM over the price and the number of masks to be made for raised amount."We then settled on R19 lakh for 18,000 masks," said Kapila. "Even this meant that a shield would cost Rs 105, which was still higher than the price of other 3D printers. The price was again reduced to Rs 75, before they finally agreed to R60. At the same time, the fundraising goal was also increased to Rs 21 lakh. They already had orders and capacity for 14,500 masks and we wanted to help as much as we could."

Kapila’s tweet tagging Aaditya Thackeray where she called out Boson

Boson was paid around Rs 13 lakh for the 14,500 face shields, and the remaining money was with Ketto, to be paid after the second batch of shields were dispatched.

The story gets muddled at this point, with Kapila taking to Twitter on May 1, accusing the company of not honouring its commitment and claiming even Rs 60 per mask was steep.

"After many enquiries, and [BM co-founders and brothers] Arjun and Parth Panchal's consistent unavailability, they finally sent a cost breakdown that I forwarded to various industry experts for verification."

In another tweet, Kapila alleged BM charged more than market price. Both Kapila and Ketto also claim that BM had been evading their questions.

"As of today, suppliers charge anywhere between Rs 35 and Rs 50 for a shield of the same quality," Kapila told mid-day. "This suggests that BM is trying to profit off this fundraiser. Profiting off a pandemic is shameful and anti-national. For instance, the cost of the plastic frame is quoted as R80 and they could only justify Rs 27. That's a difference of Rs 53. Further, the visor cost is quoted as Rs 30, but we found out that a sheet costs Rs 8. The tally says BM has delivered 10,700 pieces but we don't know if this has actually happened. As of today, Boson owes [me and Ketto] Rs 6,76,000," Kapila said.

By this, Kapila means BM has to return her and Ketto R6,76,000 from the initial Rs 13 lakh paid, as per her calculations. "The last time I spoke to them, which is when we reached a price of Rs 60, they agreed to return the money but later said their CA would get in touch and have ghosted me since," said Kapila.

Parth Panchal. Pic/Facebook, Arjun Panchal. Pic/Twitter

BM claims it has already delivered 10,700 face shields to 19 hospitals and other institutions across the country, including Mumbai's Sion Hospital, Kasturba Hospital, KEM Hospital, Wadia Hospitals—and even the BMC.

In an email to mid-day, BM refers to Ketto Online Ventures Private Limited as the buyer, and not Kapila. "We are unaware of the role of Ms Kusha Kapila with the buyer, M/s Ketto Online Ventures Private Limited, and whether she is authorised to represent the company in commercial matters," it said.

BM also alleged Ketto owes them an outstanding R1,31,063 from the orders that they had already fulfilled.

"We have seen the statement put out by Boson and our legal team is taking necessary steps," said Varun Sheth, of ketto.org.

Catch up on all the latest Mumbai news, crime news, current affairs, and a complete guide from food to things to do and events across Mumbai. Also download the new mid-day Android and iOS apps to get latest updates.

Mid-Day is now on Telegram. Click here to join our channel (@middayinfomedialtd) and stay updated with the latest news

Exports of Paper, Publishing & Printing in Switzerland increased to 125.73 CHF Million in March from 114.30 CHF Million in February of 2020. Exports of Paper, Publishing & Printing in Switzerland averaged 147.31 CHF Million from 2014 until 2020, reaching an all time high of 388.65 CHF Million in July of 2019 and a record low of 103.29 CHF Million in August of 2019. This page includes a chart with historical data for Switzerland Exports of Paper, Publishing & Printing.

Imports of Paper, Publishing & Printing in Switzerland increased to 306.26 CHF Million in March from 291.67 CHF Million in February of 2020. Imports of Paper, Publishing & Printing in Switzerland averaged 317.58 CHF Million from 2014 until 2020, reaching an all time high of 464.61 CHF Million in May of 2019 and a record low of 104 CHF Million in May of 2014. This page includes a chart with historical data for Switzerland Imports of Paper, Publishing & Printing.

Exports: Wood And Wood Products, Paper And Printing in Italy increased to 711.96 EUR Million in February from 655.05 EUR Million in January of 2020. Exports: Wood And Wood Products, Paper And Printin in Italy averaged 708.57 EUR Million from 2014 until 2020, reaching an all time high of 846.93 EUR Million in October of 2018 and a record low of 487.73 EUR Million in August of 2014. This page includes a chart with historical data for Italy Exports of Wood and Wood Products, Paper and Prin.

Big-name investors such as Elliott and Caxton act on concerns over debasement of money

Doxzoo proudly says on its website that your “documents are in safe hands.” But for some time, that wasn’t true. The U.K. printing company left its customer files on a cloud storage bucket, hosted on Amazon Web Services, without a password. Anyone who knew the easy-to-guess bucket name could access the massive trove of customer […]

Keira Knightley was spotted sprinting in London after spray painting a poster as she filmed for her upcoming movie about how the Women’s Lib movement came to prominence.

Their solution addresses the problem ventilator shortage in the country by splitting oxygen supply so that the machine can be used on two patients simultaneously

Maitreyee Chatterjee was a woman of great grit, and a crusader for the rights of women long before such efforts gained attention or recognition. Shoma Chatterji notes her passing.

Cham : Springer, 2020.

With our move to the main campus network, public computers can now print to either the blue or the orange printer. Both printers are installed on every computer.

Blue printer not working? Have the user pick the orange printer from the printing drop down menu, as pictured at right.

Orange printer not working? Have the user print to the blue printer.

When one printer is down for an extended time, IT will re-direct print jobs to the other printer so that users may get their prints.

Steinberg, S. H. (Sigfrid Henry), 1899-1969

Australia. Parliament. Joint Committee on Publications, author

Ceo of 3DSystems Abe Reichental and a couple of aspiring 3D engineers discuss the future place and capabilities of 3D Printing.

Lead systems engineer Jason Lopes walks us through the process of creating a maquette—a 10 to 18-inch 3-D figure—which gives the team a tangible and highly detailed representation of the creature.