H K Digital Online offers Print Designing, Brochure designing, logo designing, leaflet designing, graphic designing with affordable rates.

H K Digital Online is the Website Design Company provide creative design needs in India. Our web designers specialize in creative fresh web designs with an artistic flare with affordable rates.

H K Digital Online is the Online Marketing Company provide creative Website design, SEO Services, Website Development and Web Hosting needs in India. Do you need leads? Contact us NOW.

H K Digital Online is the Online Marketing Company provide creative Website design, SEO Services, Website Development and Web Hosting needs in India. Do you need leads? Contact us NOW.

H K Digital Online is the Online Marketing Company provide creative Website design, SEO Services, Website Development and Web Hosting needs in India. Do you need leads? Contact us NOW.

H K Digital Online is the Online Marketing Company provide creative Website design, SEO Services, Website Development and Web Hosting needs in India. Do you need leads? Contact us NOW.

H K Digital Online is the Online Marketing Company provide creative Website design, SEO Services, Website Development and Web Hosting needs in India. Do you need leads? Contact us NOW.

H K Digital Online delhi based web design company India provides web designing delhi and Web application, Web development, Search engine promotion and web page designing services in india Delhi.

Get a Quote for Website Design Services, SEO Services, Software Development Services, Web Hosting Services, Multimedia Solutions, Networking Solutions, Print Designing

H K Digital Online is the Online Marketing Company provide creative Website design, SEO Services, Website Development and Web Hosting needs in India. Do you need leads? Contact us NOW.

Contact Us Delhi India Based Website Design Company, SEO Company, Website Development Company, Software Development Company, Web Hosting Company, Multimedia Solutions Company, Networking Solutions Company and Print Desiging Company

H K Digital Online is the Online Marketing Company provide creative Website design, SEO Services, Website Development and Web Hosting needs in India. Do you need leads? Contact us NOW.

Agency: CHR Closing Date: 6/5/2020

State buildings, essential businesses to screen workers, visitors WILMINGTON, Del. – Governor John Carney on Monday signed the eighth modification to his State of Emergency declaration, which allows child care programs in Delaware to be designated as emergency child care sites in an effort to assist essential personnel during the coronavirus crisis. Read the full […]

The Mini Cooper SE made its debut last year with a funky wheel design which they then called the ‘Corona Spoke’, which has turned out to be somewhat inappropriate in recent times.

Like the Renault Kwid, the Datsun Redi-Go will be getting a makeover soon with a new design and some feature updates. We now have a glimpse of what it may look like.

Electric Ambassador on The Grand Tour: DC Design e-Amby is being developed under a new brand called DC2. It is meant to be an all-electric car that draws inspiration from the iconic Ambassador.

Youtube tyre shredding sensation, Ken Block has roped in latest batmobile designer to make his next hooning machine. Here are the renderings of the new Fox-body Mustang called the Hoonifox and a tyre shredding video may on the way soon.

Google's Gmail update went live this week. Here's what marketers need to know

The Samsung Galaxy A21s has been popping-up in the rumor mill from time to time, over the last couple of months. Now, a new leak claims to showcase a render of its front side. It's a slightly odd, yet totally believable development, since the front of the phone, as shown here, looks nearly identical to a set of recent Galaxy A21 leaked renders. Not only that, but the Galaxy A11 and M11 appear to be in the exact same boat, as well. Interestingly enough, despite their lower standing in the lineup, the latter two sems to show slimmer chins and top bezels in their respective renders. Alongside...

Designers Liam + Jord have created a series of minimalistic history-inspired “logos” for cities affected by World War II as part of RT’s tribute project #VictoryPages featuring cities such as Moscow, Warsaw, Berlin, and Hiroshima.
Read Full Article at RT.com

  You might have heard of the term ‘UX’ quite often. Ever wonder what it is? Or did you merely dismiss it thinking that it’s something related to the UI? The UX has become an important...

  Pixate is what you’d call an app prototyping tool and they are a dime a dozen. For the uninitiated, prototyping is how you generate mockups or prototypes of applications without the need to know...

Honda Cars implements new corporate identity for its dealer network.

MapmyIndia says it has a solution that tells the exact range of an electric car, as it is being driven

Looks much like Mission E Concept that debuted at Frankfurt Motor Show 2015

COVID-19: The team, which consists of only volunteers, has been working without any funding and is working anonymously so that people do not call them with inquiries about the project.

Imran Hussain, the Ballimaran MLA, has been retained as a Cabinet minister in the Arvind Kejriwal government. He will take oath of office on Sunday along with his five Cabinet colleagues and Arvind...

RBI to issue banknotes of Rs 1,000 Denomination with new design

With more and more SoCs employing sophisticated interconnect IP to link multiple processor cores, caches, memories, and dozens of other IP functions, the designs are enabling a new generation of low-power servers and high-performance mobile devices. The complexity of the interconnects and their advanced configurability contributes to already formidable design and verification challenges which lead to the following questions:

While your interconnect subsystem might have a correct functionality, are you starving your IP functions of the bandwidth they need? Are requests from latency-critical initiators processed on time? How can you ensure that all applications will receive the desired bandwidth in steady-state and corner use-cases?

To answer these questions, Cadence recommends the Performance Verification Methodology to ensure that the system performance meets requirements at the different levels:

1. Performance characterization: The first level of verification aims to verify the path-to-path traffic measuring the performance envelope. It targets integration bugs like clock frequency, buffer sizes, and bridge configuration. It requires to analyze the latency and bandwidth of design’s critical paths.
2. Steady state workloads: The second level of verification aims to verify the master-by-master defined loads using traffic profiles. It identifies the impact on bandwidth when running multi-master traffic with various Quality-of-Service (QoS) settings. It analyzes the DDR sub-system’s efficiency, measures bandwidth and checks whether masters’ QoS requirements are met.
3. Application specific use cases: The last level of verification simulates the use-cases and reaches the application performance corner cases. It analyzes the master-requested bandwidth as well as the DDR sub-system’s efficiency and bandwidth.

Cadence has developed a set of tools to assist customers in performance validation of their SoCs. Cadence Interconnect Workbench simplifies the setup and measurement of performance and verification testbenches and makes debugging of complex system behaviors a snap. The solution works with Cadence Verification IPs and executes on the Cadence Xcelium® Enterprise Simulator or Cadence Palladium® Accellerator/Emulator, with coverage results collected and analyzed in the Cadence vManager  Metric-Driven Signoff Platform.

To verify the performance of the Steady State Workloads, Arm has just released a new AMBA Adaptive Traffic Profile (ATP) specification which describes AMBA abstract traffic attributes and defines the behavior of the different traffic profiles in the system.

With the availability of Cadence Interconnect Workbench and AMBA VIP support of ATP, early adopters of the AMBA ATP specification can begin working immediately, ensuring compliance with the standard, and achieving the fastest path to SoC performance verification closure.

For more information on the AMBA Adaptive Traffic Profile, you can visit Dimitry's blog on AMBA Adaptive Traffic Profiles: Addressing The Challenge. 

More information on Cadence Interconnect Workbench solution is available at Cadence Interconnect Solution webpage.

Thierry

Verification of a USB4 router design is not just about USB4 but also about the inclusion of the three other major protocols namely, USB3, DisplayPort (DP), and PCI Express (PCIe). These protocols can be simultaneously tunneled through a USB4 router. Put in simple terms, such tunneling involves the conversion of the respective native USB3, DP, or PCIe protocol traffic into the USB4 transport layer packets, which are tunneled through a USB4 fabric, and converted back into the respective original native protocol traffic.

It may sound simple but is perhaps not.

There are several aspects in a router that come into picture to carry out this task of conversion of native protocol traffic, route it to the intended destination, and then convert it back to the original form. Some of those are the USB3, DP and PCIe protocol adapters, transport mechanism using routing, flow control, paths, path set-up and teardown, control and configuration, configuration spaces.

That is not all. There are core USB4 specific logical layer intricacies as well, which carry out the tasks of ensuring that all the USB4 ports and links are working as desired to provide up to 40Gbps speed and that the USB4 traffic flows through out the fabric in the intended way. These bring on the table features like High Speed link, ordered sets, lane initialization, lane adapter state machine, low power, lane bonding, RS-FEC, side band channel, sleep and wake, error checking.

All of these put together give rise to a very large verification space against which a USB4 router design should be verified. If we were to break down this space it can be broadly put in the following major dimensions,

• Protocol Adapter Layer
  • USB3 tunneling
  • DP tunneling
  • PCIe tunneling
• Host Interface Adapter Layer
• Transport Layer
  • Flow control
  • Routing
  • Paths
• Configuration layer and control packet protocol
• Configuration spaces
• Logical Layer

The independent verification of these dimensions is not all that would qualify the design as verified. They have to be verified in various combinations of each other too. Overall, all the parts of a USB4 router system need to be working together coherently.

For example, the following diagram depicts the various layers that a USB4 router may comprise of,

A USB4 router or a domain of routers does not work on its own. There is a Connection Manager per domain, which is a software-based entity managing a domain. A router provides the various capabilities for a Connection Manager to carry out its responsibilities of managing a domain.

It would not be an exaggeration to say that the spectrum of verification of a USB4 router ranges from the very minute details of logical layer to the system-level like multiple dependencies as the whole USB4 system is brought up layer by layer, step-by-step.

Cadence has a mature Verification IP solution that can help in the verification of USB4 designs. Cadence has taken an active part in the working group that defined the USB4 specification and has created a comprehensive Verification IP that is being used by multiple members in the last two years.

If you plan to have a USB4 compatible design, you can reduce the risk of adopting a new technology by using our proven and mature USB4 Verification IP. Please contact your Cadence local account team for more details and to get connected.

Verifying lane adapter state machine in a router design is quite an involved task and needs verification from several aspects including that for its link training functionality.

The diagram below shows two lane adapters connected to each other and each going through the link training process. Each training sub-state transition is contingent on conditions for both transmission and reception of relevant ordered sets needed for a transition. Until conditions for both are satisfied an adapter cannot transition to the next training sub-state.

As deduced from the lane adapter state machine section of USB4 specification, the reception condition for the next training sub-state transition is less strict than that of the transmission condition. For ex., for LOCK1 to LOCK2 transition, the reception condition requires only two SLOS symbols in a row being detected, while the transmission condition requires at least four complete SLOS1 ordered sets to be sent.

From the above conditions in the specification, it is a possibility that a lane adapter A may detect the two SLOS or TS ordered sets, being sent by the lane adapter B on the other end, in the very beginning as soon as it starts transmitting its own SLOS or TS ordered sets. On the other hand, it is also a possibility that these SLOS or TS ordered sets are not yet detected by lane adapter A even when it has met the condition of sending minimum number of SLOS or TS ordered sets.

In such a case, lane adapter A, even though it has satisfied the transmission condition cannot transition to the next sub-state because the reception condition is not yet met. Hence lane adapter A must first wait for the required number of ordered sets to be detected by it before it can go to the next sub-state. But this wait cannot be endless as there are timeouts defined in the specification, after which the training process may be re-attempted.

This interlocked way of operation also ensures that state machine of a lane adapter does not go out of sync with that of the other lane adapter. Such type of scenarios can occur whenever lane adapter state machine transitions to the training state from other states.

Cadence has a mature Verification IP solution for the verification of various aspects of the logical layer of a USB4 router design, with verification capabilities provided to do a comprehensive verification of it.

There has been so much hype about the “Internet of Things” (IoT) that it is refreshing to hear about a cutting-edge development project that can bring concrete benefits to millions of people. That project is the ongoing development of the Google Smart Contact Lens, and it was detailed in a keynote speech June 8 at the Design Automation Conference (DAC 2015).

The keynote speech was given by Brian Otis (right), a director at Google and a research associate professor at the University of Washington. The “smart lens” that the project envisions is essentially a disposable contact lens that fits on an eye and continuously monitors blood glucose levels. This is valuable information for anyone who has, or may someday have, diabetes.

Since he was speaking to an engineering audience, Otis focused on the challenges behind building such a device, and described some of the strategies taken by Google and its partner, Novartis. The project required new approaches to miniaturization, low-power design, and connectivity, as well as a comfortable and reliable silicon-to-human interface. Otis discussed the “why” as well and showed how the device could potentially save or improve millions of lives.

Millions of Users

First, a bit of background. Google announced the smart lens project in a blog post in January 2014. Since then it has been featured in news outlets including Forbes, Time, and the Wall Street Journal. In March 2015, Time reported that Google has been granted a patent for a smart contact lens.

The smart lens monitors the level of blood glucose by looking at its concentration in tears. The lens includes a wireless system on chip (SoC) and a miniaturized glucose sensor. A tiny pinhole in the lens allows tear fluid to seep into the sensor, and a wireless antenna handles communications to the wireless devices.

“We figure that if we can solve a huge problem, it is probably worth doing,” Otis said. “Diabetes is one example.” He noted 382 million people worldwide have diabetes today, and that 35% of the U.S. population may be pre-diabetic. Today, diabetics must *** their fingers to test blood glucose levels, a procedure that is invasive, painful, and subject to infrequent monitoring.

According to Otis, the smart contact lens represents a “new category of wearable devices that are comfortable, inexpensive, and empowering.” The lens does sensor data logging and uses a portable instrument to measure glucose levels. It is thin, cheap, and disposable, he said.

Moreover, the lens is not just for people already diagnosed with diabetes—it’s for anyone who is pre-diabetic, or may be at risk due to genetic predisposition. “If we are pro-active rather than re-active,” Otis said, “Instead of waiting until a person has full-fledged diabetes, we could make a huge difference in peoples’ lives and lower the costs of treating them.”

Technical Challenges

No one has built anything quite like the smart lens, so researchers at Google and Novartis are treading new ground. Otis identified three key challenges:

• Miniaturization: Everything must be really small—the SoC, the passive components, the power supply. Components must be flexible and cheap, and support thin-film integration.
• Platform: Google has developed a reusable platform that includes tiny, always-on wireless sensors, ultra low-power components, and standards-based interfaces.
• Data: Researchers are looking for the best ways to get the resulting data into a mobile device and onto the cloud.

Comfort is another concern. “This is not intended to be for the most severe cases,” Otis said. “This is intended to be for all of us as a pro-active way of improving our lifestyles.”

The platform provides a bidirectional encrypted wireless link, integrated power management, on-chip memory, standards-based RFID link, flexible sensor interface, high-resolution potentiostat sensor, and decoupling capacitors. Most of these capabilities are provided by the standard CMOS SoC, which is a couple hundred microns on a side and only “tens of microns” thick.

Otis noted that unpackaged ICs are typically 250 microns thick when they come back from the foundry. Thus, post-processing is needed so the IC will fit into a contact lens.

Furthermore, the design requires precision analog circuitry and additional environmental sensors. “Some of this stuff sounds mundane but it is really hard, especially when you find out you can’t throw large decoupling capacitors and bypass capacitors onto a board, and all that has to be re-integrated into the chip,” Otis said.

Sensor Challenges

Getting information from the human body is challenging. The smart lens sensor does a direct chemical measurement on the surface of the eye. The sensor is designed to work with very low glucose concentrations. This is because the concentration of glucose in tears is an order of magnitude lower than it is in blood.

In brief, the sensor has two parallel plates that are coated with an enzyme that converts glucose into hydrogen peroxide, which flows around the electrodes of the sensor. This is actually a fairly standard way of doing glucose monitoring. However, the smart lens sensor has two electrodes compared to the typical three.

In manufacturing, it is essential to keep costs low. Otis outlined a three-step manufacturing process:

• Start with the bottom layer, and mold a contact lens in the way you typically would.
• Add the electronics package on top of that layer.
• Build a second layer that encapsulates the electronics and provides the curvature needed for comfort and vision correction.

Beyond the technical challenges are the “clinical” challenges of working with human beings. The human body “is messy and very variable,” Otis said. This variability affects sensor performance and calibration, RF/electro-magnetic performance, system reliability, and comfort.

The final step is making use of the data. “We need to get the data from the device into a phone, and then display it so users can visualize the data,” Otis said. This provides “actionable feedback” to the person who needs it. Eventually, the data will need to be stored in the cloud.

As he concluded his talk, Otis noted that the platform his group developed may have many applications beyond glucose monitoring. “There is a lot you can do with a bunch of logic and sensing capability,” he said, “and there are hundreds of biomarkers beyond glucose.” Clearly this will be an interesting technology to watch.

Richard Goering

Related Blog Post

- Gary Smith at DAC 2015: How EDA Can Expand Into New Directions

Hi! 

In my design, there is an one hold violation on scan path, test data is corrupted during scan cycles (when i run verilog simulation of test vectors). I created constraint 'falsepath' to 'TI' input of violated flop and load it into Modus, but this does not have effect.

Can enyone explain to me, does 'falsepath' constraint affects scan path (from Q to TI/SI input, i.e. during SCAN procedure) or this constraint is only for functional mode (ie affects TEST cycle only - to 'D' input)?

I hope resolve this problem this by using some modus design constraints or any other method.

Dear all,

I am using Conformal Constraint Designer (Version 17.1) to analyse a SystemVerilog based design.

While performing default HDL checks it finds  some violations (issues) in RTL and complains (warnings, etc) about RTL checks and others.

My questions:

Is there any directive which I can add to RTL (system Verilog) so that particular line of code or signal is ignored or not checked for HDL or RTL checks.

I can set ignore rules in rule manager (gui) but it does not seems effective if code line number changes or new signals are introduced.

What is the best way to customize default_hdl_rules ?

I will be grateful for your guidance.

Thanks for your time.

Hi,

Is it possible to use a SystemVerilog package which is compiled into a library and then use it in a VHDL-2008 design file? Is such mixed-language flow supported?

I'm considering the latest versions of Incisive / Xcelium available today (Oct 2019).

Thank you,

Michal

Vegas, here we come. All of us fun EDA engineers at once. Be prepared, next week’s Design Automation Conference will be busy! The trends I had outlined after last DAC in 2018—system design, cloud, and machine learning—have...(read more)

Iam new to Package design SIP tool.

I had created the DIE package using SIP. Kindly give the direction how to map the created DIE package in Allegro pcb editor 17.2 ver.

In Allegro design capture CIS tool we had created the schematics file. The DIE which we are using is having 100pins, We had created the DIE in SIP tool. Out of 100 Die pins, only 90 pins is getting connected others are NC pins. We had mapped the Bond fingers only for 90 Die pins in the SIP package. But in the Schematics we had created the DIE logic symbol for 100 pins. Please advice whether we can able to import the DIE package in the allegro tool. In this scenario while importing the 100 pin DIE package in allegro pcb editor will the net connectivity will be shown from the DIE pad to Bond fingers and from Bond fingers to respective components? Please suggest whether we are going in the right path or please advice what we have to proceed with.

Thanks in Advance,

Rajesh

Have you ever manufactured a printed circuit board (PCB) without analyzing all the routed signal traces? Most designers will say “yes, all the time.” Trace widths and spacing are set by constraints,...

[[ Click on the title to access the full blog on the Cadence Community site. ]]