Attorney General Kathy Jennings last week secured a multi-year suspension and fines from a Wilmington based financial adviser for making false and misleading statements to her office’s Investor Protection Unit, the state securities regulator for Delaware, and for providing advisory services to clients while unregistered to do so. “Protecting investors from unscrupulous financial professionals is […]

House Bill 180, sponsored by Representative Baumbach, has bipartisan support in General Assembly DOVER, Del. – Governor John Carney and members of the General Assembly announced legislation on Thursday that would expand protections for Delawareans affected by computer security breaches. The bipartisan legislation, House Bill 180, is sponsored by Representative Paul Baumbach. Additional sponsors include […]

Loan program would protect federal workers and their families during government shutdown DOVER, Del. – Governor John Carney and members of the Delaware General Assembly announced legislation on Tuesday to help federal workers who live in Delaware and are affected by the ongoing shutdown of the federal government. House Bill 3, sponsored by House Majority […]

TOWNSEND, Del. (September 20, 2022) – At a bill signing ceremony held at the Blackbird State Forest’s Meadow Tract, Governor Carney signed Senate Bill 328, renaming the Blackbird State Forest’s Meadows Tract the “Bruce C. Ennis Tract” in honor of Senator Bruce C. Ennis. The Ennis Tract covers 456 acres with open meadows, forested trails, […]

With the passing of former State Senator J. Donald Isaacs on April 28, 2023, Governor John Carney has ordered the Delaware flags at state buildings and facilities be flown at half-staff on Monday, May 8, 2023, as a mark of respect for Mr. Isaacs and his service to Delaware.

SMYRNA, DE (Jan. 19, 2022) – The Delaware Public Health Laboratory (DPHL) will nearly double in size to increase the capacity for routine and outbreak testing to accommodate advanced technical laboratory staff and the infectious disease epidemiology program. State leaders today held a groundbreaking for the expansion on the property of the Delaware Department of Health and […]

DOVER, DE (Nov. 18, 2022) – The Delaware Division of Public Health (DPH) reports that the statewide 7-day average of new positive COVID-19 cases has decreased for the fourth consecutive month. Hospitalizations and deaths related to COVID-19 have remained low over the same time period. Average new positive cases are lowest in Kent County, with Sussex County only slightly higher. However, […]

This article was written based on an interview. Exploring SAS courses: thoughts on my learning journey My journey started with programming eLearning courses that got me hooked and curious about a wide range of topics. These online lessons were great because they were short and focused on technical stuff. But [...]

Reflecting on learning as both a student and an educator was published on SAS Users.

Secretary Nathaniel McQueen Jr., DATE Director John Yeomans, Highmark Blue Cross Blue Shield Communications Manager Denée Crumrine, Lt. Governor Bethany Hall-Long DOVER, DE – The Division of Alcohol and Tobacco Enforcement (DATE) was joined by Lt. Governor Bethany Hall-Long, Safety and Homeland Security Secretary Nathaniel McQueen Jr. representatives from the Office of Highway Safety (OHS) […]

The Delaware Heritage Commission and the Delaware Public Archives are pleased to announce the hiring of Ms. Margaret Hughes for the position of The State of Delaware's 250th Anniversary Coordinator.

The post The State of Delaware hires 250th Anniversary Coordinator appeared first on Delaware Public Archives - State of Delaware.

State of Delaware, DuPont and University of Delaware partner to form Delaware Innovation Space, Inc.   WILMINGTON, Del. – Governor John Carney on Monday announced the creation of the Delaware Innovation Space, Inc. – a nonprofit public-private partnership established by the State of Delaware, DuPont, and the University of Delaware that will catalyze the entrepreneurial […]

U.S. Senator Chriss Coons and Ambassador to Australia Carolina Kennedy recently visited New Castle's historic sites.

Smyrna High School was named the national champion at this year’s Educators Rising conference – the second consecutive national win and the first time any team has won two years in a row.

The Office of the Marijuana Commissioner (OMC) has received reports of out-of-state entities contacting potential social equity applicants in Delaware. These entities may be trying to trick you into paying for help securing a social equity license.   The OMC does not endorse these activities and is working to investigate them, partnering with the Department […]

The Delaware Department of Agriculture announced today that Mark Short has been named the new Delaware Standardbred Breeders’ Fund (DESBF) administrator. He will begin his new role as the DESBF administrator on November 1.

The Fire Prevention Commission was honored by a visit from Senator Carper on September 13, 2024.  This was an opportunity for the Fire Commission to celebrate Senator Carper and the years of support and dedication that he’s shared with first responders both nationally and in Delaware. Representing the Delaware Fire Service Center was the Fire […]

DEPARTMENT OF STATE: Division of Professional Regulation

DEPARTMENT OF EDUCATION: Professional Standards Board

Read the in depth Review of CORSAIR DOMINATOR PLATINUM RGB First Edition DDR5 DRAM Memory Kit PC Components. Know detailed info about CORSAIR DOMINATOR PLATINUM RGB First Edition DDR5 DRAM Memory Kit configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Read the in depth Review of Acer Predator Helios Neo 16 Laptops. Know detailed info about Acer Predator Helios Neo 16 configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Shared by Gator Boys star Paul Bedard, the viral video shows the alligator emerging from his den to the tune of the iconic song.

Kapil Sharma wasted no time in diving into their personal stories, focusing on how Deepinder met his Mexican wife.

Zomato witnesses approximately 400,000 cancelled orders monthly which prompted it to launch the initiative.

The prankster claims that as many as seven schools fell prey to his prank and made the hats.

I am attempting to use dbGetNeighbor() function inside the dynamic display HUD so that the distance to the next metal on that layer could be viewed. Think of another line in this dynamic table here... 

My SKILL code is essentially the following:

procedure(getNearestNeighborOnMetal(cv)
let((direction tmpBoundingBox)
direction = internal_function()
tmpBoundingBox = dbCreateRect(geGetEditCellView() "tmp" list(hiGetCommandPoint() hiGetCommandPoint()))
car(dbGetNeighbor(geGetEditCellView() tmpBoundingBox direction))
)
)

this returns the distance to the closest metal based on some tests.

Next, I try to register this function to work in the Dynamic Display / Info Balloon world by executing odcRegisterCustomFunc() for each and every object type (I know, absurd, but trying to debug)

In the dynamic display menu, I toggle the "Custom SKILL Function" check in layoutXL, then hit apply, then OK.

After this I find I am unable to view the changes reflected in any info balloons or in the drawing HUD (above) for this wire. I have tried replacing my function with the sample "customFunc" from the odcRegisterCustomFunc() documentation and was still unable to produce any new output.

Any help diagnosing the use of this feature would be very much appreciated

Hello,

I would like to create a button for my form that prompts the user to click on a cellview and draw a rectangle bounding box, exactly like the one used in the Area and Density Calculator. Can someone please help me with this?

Thanks!

Beto

Have you ever thought of a handy utility to specify all necessary transmission line parameters to decide upon the stackup?   

Starting SPB 23.1, a handy feature Transmission Line Calculator, is built into Allegro X Advanced Package Designer (Allegro X APD). This feature will require either an SiP Layout license or can be accessed through SiP Layout Bundle. 

From the Analyze dropdown menu in the 23.1 Allegro X APD toolbar, you can choose Transmission Line Calculator. 

You can use this calculator to help decide constraints and stackup for laminate-based PCB or Packages. You can calculate the correct stackup material and width/spacing to meet any requirements that may be later entered in a constraint. This is truly a calculated number and not a true field solver. 

The different types of calculations that the Transmission Line Calculator can provide are Microstrip, Embedded microstrip, Stripline, CPW (Coplanar), FGCPW (frequency-dependent Coplanar), Asymmetric stripline, Coupled microstrip (Differential Pair), Coupled stripline (Differential Pair), and Dual striplines. 

This feature is important for customers relying on fabricators/spreadsheets to provide this information or need to test a quick spacing/width as per the impedance value. 

Let us know your comments on this new feature in 23.1 Allegro X APD. 

I've heard lots of people asking for a way to generate Makefiles for Specman code, and it seems there are some who don't use "irun" which takes care of this automatically. So I wrote this little utility to build a basic Makefile based on the compiled and loaded e code.

It's really easy to use: at any time load the snmakedeps.e into Specman, and use "write makefile <name> [-ignore_test]".
This will dump a Makefile with a set of variables corresponding to the loaded packages, and targets to build any compiled modules.
Using -ignore_test will avoid having the test file in the Makefile, in case you switch tests often (who doesn't?).

It also writes a stub target so you can do "make stub_ncvlog" or "make stub vhdl" etc.

The targets are pretty basic, I thought it was more useful to #include this into the main Makefile and define your own more complex targets / dependencies as required.

The package uses the "reflection" facility of the e language, which is now documented since Specman 8.1, so you can extend this utility if you want (please share any enhancements you make).

 Enjoy! :-)

Steve.

Hello, Currently i am designing a 96MHZ crystal oscillator using pierce topology and also I use for amplitude gain control circuit for regulation. The problem is when i run a PSS + Pnoise i get these warnings :

WARNING (CMI-2375): M2: Vgs has exceeded the oxide breakdown voltage of `vbox' = 6 V.
WARNING (CMI-2375): M4: Vgs has exceeded the oxide breakdown voltage of `vbox' = 6 V.
WARNING (CMI-2377): M4: Vgd has exceeded the oxide breakdown voltage of `vbox' = 6 V.
WARNING (CMI-2377): M3: Vgd has exceeded the oxide breakdown voltage of `vbox' = 6.6 V.

and also WARNING (CMI-2682): M5: The bulk-drain junction forward bias voltage (1.38154 V) exceeds VjdmFwd'=851.514mV ,The results are now incorrect because the junction current model has been linearized

Note : i am using Supply 1.2 V hence it is not possible to exceed the oxide breakdown. 

So i am asking why i am getting these warnings , it could be a convergence problem and the Results computed are not corrected.

Also when running DC and transient , i don't get these warnings.

Hi *,

I am simulating a 32kHz high Q crystal oscillator with a pulse shaping circuit. I set up a PSS analysis using the Shooting Newton engine. I set a beat frequency of 32k and used the crystal output and ground as reference nodes. After the initial transient the amplitude growth was already pretty much settled such that the shooting iterations could continue the job.

My problem is: In 5...10% of my PVT runs the simulator detects a frequency divider in the initial transient simulation. The output log says:

Frequency divided by 3 at node <xxx>

The Estimated oscillating frequency from Tstab Tran is = 11.0193 kHz .

However, the mentioned node is only part of the control logic and is always constant (but it has some ripples and glitches which are all less than 30uV). These glitches spoil my fundamental frequency (11kHz instead of 32kHz). Sometimes the simulator detects a frequency division by 2 or 3 and the mentioned node <xxx> is different depending on PVT - but the node is always a genuine high or low signal inside my control logic.

How can I tell the simulator that there is no frequency divider and it should only observe the given node pair in the PSS analysis setup to estimate the fundamental frequency? I have tried the following workarounds but none of them worked reliably:

- extended/reduced the initial transient simulation time

- decreased accuracy

- preset override with Euler integration method for the initial transient to damp glitches

- tried different initial conditions

- specified various oscillator nodes in the analysis setup form

By the way, I am using Spectre X (version 21.1.0.389.ISR8) with CX accuracy.

Thanks for your support and best regards

Stephan

Hello everybody,

As you can find in the attached image, I am trying to simulate a Colpitts oscillator. However, using pss analysis it shows a high output power. 

My question is where is the problem of my structure or simulation setup?

Best,

Hello everyone,

For my cross-coupled oscillator design, I have a problem with stability analysis. Based on my achieved results which are attached, where is my design problem?

Best,

https://ibb.co/bgKFP4N

https://ibb.co/3FGRLmV

https://ibb.co/pwSZDSF

Replacing the “nightmare” that was Nafta was a dream of US president Donald Trump – but its replacement appears to favour few groups except for dispute resolution firms.

Paul Mescal, Denzel Washington, and Pedro Pascal face off in Ridley Scott's "Gladiator II." Review.

Australian data centre operator NEXTDC Limited is building its first overseas facility in Malaysia.

Robots transporting heavy metal at a Toyota plant. Yaskawa’s robots working alongside human coworkers in factories. To advance efforts like these virtually, Rikei Corporation develops digital twin tooling to assist planning. And if that weren’t enough, diversified retail holdings company Seven & i Holdings is running digital twin simulations to enhance customer experiences. Physical AI Read Article

Lee Seung-woong didn’t have an auspicious start when he first came to Shanghai from South Korea in 2005 and worked in an Italian restaurant.

MINNEAPOLIS, MINNESOTA — Huldah Momanyi Hiltsley made history November 5 by becoming the first Kenyan-born immigrant elected to the Minnesota House of Representatives. She describes her victory as a testament to resilience, determination and the realization of the American dream. Standing in the State Capitol for the first time on the morning of her orientation, Hiltsley told VOA she was overwhelmed with emotions and eager to start her journey as an elected official. “I am super excited,” Hiltsley said. “Today is orientation day for new legislators, and to be standing in this Capitol as an African immigrant woman is a tremendous honor. I’m just overexcited right now.” She said this milestone did not come easily. Her path to the Minnesota State Capitol was marked by struggles, including a fight against an immigration system that nearly led to her family’s deportation. She credits much of her success to the community support and the intervention of the late U.S. Senator Paul Wellstone, whose advocacy she said ultimately secured her family’s green cards and, later, citizenship. “Getting to this moment honestly is just a testament to the struggles that my family has gone through to be in this country,” she said. There has been a media frenzy surrounding Hiltsley’s victory and it has captured the attention of Kenyan media, with celebrations taking place in her hometown, Nyamemiso village, which is eight hours from Nairobi, Kenya's capital. Despite the attention, Hiltsley said she remains humble.  “I’m that little girl from that little village somewhere in the middle of Kenya, and now I’m in the spotlight of this media frenzy. And so, I’m still trying to really appreciate the magnitude of the moment,” she said. Hiltsley said she has a desire to inspire others, particularly young girls in Kenya and the United States. "It is still surreal,” she said, adding that “if I can make it to this point, I can be a role model to somebody to remind them that it is possible that our wildest dreams are possible. And that would be something that I would look back and say, wow, I’ve made a difference in somebody’s life.” Her legislative priorities Looking ahead, Hiltsley said she is committed to championing issues that matter to her constituents in Minnesota’s Legislative District 38A. Her priorities include community-centered public safety policies, affordable housing options, workers’ rights and support for small businesses — many of which are run by African immigrants. “The resources are out here,” she said, promising to empower her community. “It is my job to go back to my community and tell them, hey, there are resources here. This is how this system works. Let’s work together to mobilize and make sure that we are also taking a piece of the pie,” she said. As the first Kenyan American woman in Minnesota's Legislature, Hiltsley said she recognizes the weight and responsibility of her position. She described it as “an honor that I don’t take lightly.” “I don’t want to be the last,” she, adding that she hopes "this moment right here is a testimony that you can come to this country, work hard, take care of business, know your craft, stick to it, be consistent and get to where you want to.” Her message to those who have yet to succeed in their political campaigns is clear: Perseverance is key. “Be consistent. Keep going. There’s enough space in this Legislature for more people of color, especially immigrants, because that’s the voice that is missing,” Hiltsley said. Changing political scene Hiltsley shared her thoughts on the changing political landscape in Washington, particularly with the coming administration under President-elect Donald Trump. While acknowledging the challenges, she said she will stay focused on serving her constituents in Minnesota, regardless of politics. “We are here to serve the people, and it doesn’t matter if you are Democrat or Republican,” she said. “We are here as legislators to serve the people of Minnesota.” Hiltsley also shared her heartfelt message to fellow Kenyans who have been celebrating her historic achievement. “This is a historical moment, and I’m honored to be a Kenyan American,” she said. “Let’s continue celebrating this victory, but after that, we have work to do.” She said her eyes are set on not just her role in Minnesota, but also finding ways to collaborate with Kenya’s leaders to address issues facing the country, including corruption and a lack of strong leadership. “Kenya has unlimited potential,” she said. “It’s up to our leaders to do right by the people.” Hiltsley will officially take her seat in the Minnesota State House of Representatives and be sworn in on January 7. Representatives are elected to serve two-year terms. This story originated in VOA’s Swahili Service. Salem Solomon contributed to the report from Washington.

Qatar pauses cease-fire negotiations between Israel and Hamas citing unwillingness and unseriousness from the warring parties. Meanwhile, Israel ratchets-up strikes against Hamas targets in Gaza and Hezbollah targets in Lebanon. VOA’s Arash Arabasadi reports.

La enseñanza bíblica en profundidad de John MacArthur lleva la verdad transformadora de la Palabra de Dios a millones de personas cada día.

La enseñanza bíblica en profundidad de John MacArthur lleva la verdad transformadora de la Palabra de Dios a millones de personas cada día.

La enseñanza bíblica en profundidad de John MacArthur lleva la verdad transformadora de la Palabra de Dios a millones de personas cada día.