Monitoring and assessment of habitats is essential to evaluate biodiversity policy and improve the condition of valuable ecosystems. A new study has reviewed the value of remote sensing — using information from satellite or airborne imagery — for this purpose, and the authors make a series of key recommendations, including the importance of tailoring remote sensing output for policymakers.

Hedgerows are vital habitats in intensively managed landscapes, providing food and shelter for wildlife. How hedgerows are managed affects their structure, with dense, woody hedges being the most valuable for conservation. A recent study has found an alternative method of hedging that is cheaper than traditional hedge laying but offers the same benefits of dense new growth and berry provision for wildlife. Use of this method could double the length of hedgerows being rejuvenated in England, the authors estimate.

Green spaces like urban parks can counteract the loss of plant and animal species caused by urbanisation. For many city dwellers, parks provide most of their experiences of natural spaces. Researchers have compared different methods of park management in Paris and Berlin, and assessed how they influence citizens' attitudes towards nature.

Olympia oysters (Ostrea lurida) have been shown to adapt to local environments that are as little as 20 km apart, and these adaptations can be passed on to offspring. In this study, oysters that originated from less saline areas tended to be more resilient to extremely low saline conditions than oysters from more saline areas. Since episodes of reduced salinity are a predicted effect of climate change in the San Francisco Bay area under study, the authors say their findings could be useful for future conservation and restoration efforts.

Land and soil are limited natural resources essential to all human life. One of the major environmental challenges facing Europe is an increasing demand for development, which threatens ecosystem services. This Future Brief focuses on how land and soil could be used efficiently to continue to provide these functions and services for generations to come.

Voluntary non-monetary conservation — where citizens implement actions without a financial incentive — is an emerging approach to biodiversity protection that could be applied in many countries and environments, a new study shows. This study makes recommendations for actions, such as being simple and affordable, and calls for conservation scientists to recognise their value as a complementary tool alongside traditional market-based and coercive approaches, such as payment for ecosystem services and national parks.

Large carnivores play important roles in ecosystems by regulating populations of herbivores and other species. Understanding how human activities affect the role of predators, particularly within human-modified systems such as agricultural landscapes, is therefore important. This study investigated how predator and prey populations were distributed in Transylvania, Romania, and assessed them in relation to human activities. The research highlights how relationships between large carnivores and people need to be considered as part of biodiversity conservation efforts, especially considering the successful recovery of several large carnivore populations within the EU.

This study is one of few to assess the genetic diversity of crops in an agroecosystem over several years. Researchers analysed the genetic makeup of oilseed rape plants within and outside crop fields over four years. They found similarity between cultivars of field plants in one year and those of feral plants (unplanted) in the following year. They also found persistence of the cultivars within the feral plants, which suggests that feral populations with genetically modified (GM) traits might result from persistent GM traits within field seed banks. The researchers say their findings could aid impact assessments of GM crops.

A new study has investigated the effects of set-aside management —when fields are taken out of agricultural production — on common invertebrate decomposers in soil. The diversity of woodlice species was higher in set-aside fields compared to neighbouring wheat fields and this effect increased in older set-asides. This study highlights the importance of set-aside areas as habitats for soil invertebrates, which are important for soil health.

The growing human population and a shift to more resource-intensive habits and behaviours are increasing the demands on global ecosystems. Natural capital is a way to describe Earth’s natural assets, including soil, air, water, and living things, existing as complex ecosystems, which provide a range of services to humans. Depleting and degrading these reserves may irreversibly reduce the availability of benefits to future generations. This In-Depth Report presents an overview of ideas, debates and progress so far in natural capital accounting, in particular in accounting for ecosystems and their services.

Woody networks in agricultural landscapes are known to harbour high intrinsic biodiversity (i.e. diversity of plant species) and functional biodiversity (i.e. ecosystem services that arise from biodiversity). In order to clarify the drivers of intrinsic and functional biodiversity in woody networks, researchers analysed the plant species diversity, pollinator resource value (PRV), and potential edibility value (PEV) of a woody network in northern Belgium. The analysis confirmed that woody elements are a rich source of intrinsic and functional biodiversity and identified several important drivers. From a policy perspective, this research highlights the value of protecting existing woody elements and thoughtfully designing and locating new ones to maximise intrinsic and functional biodiversity in the countryside.

Free-flowing rivers (FFRs) support a complex, dynamic and diverse range of global ecosystems, and provide important economic and societal services. However, infrastructure built to use these services — most notably 2.8 million dams worldwide — has caused many rivers to become fragmented and disconnected, affecting river biodiversity and ecosystem services. This study constructed a global information system with which to map the fine-scale dynamics and fragmentation of FFRs and to determine how human pressures affect the world’s river systems.

New research demonstrates how nanoparticles of silver in antibacterial socks and other fabrics may be released into the environment by washing. The study suggests that the release of silver from the textiles depends to a large extent on the way the silver has been incorporated into the fabric and that producers have possibilities for minimising release.

Ecological risk maps showing 'hotspots' of risk to wildlife from single or combined soil pollutants have been developed. These maps can be used to improve risk analysis and stakeholder communications.

A new study has developed risk assessment criteria for engineered nanomaterials (ENMs) to help inform innovation and policy decisions. It illustrates that product design can influence the unintended release of ENMs and that combining knowledge about the product life cycle with a systematic assessment of the potential hazards may enable responsible choices for future product developments to be made.

The Deepwater Horizon Oil Spill saw the first ever use of chemical dispersants to reduce the impacts of an oil spill at a deepwater level. A new study has investigated the fate of these dispersants in deepwater and concluded that they do not biodegrade well.

A recent study has considered the levels at which active pharmaceutical ingredient (API) residues are safe when released into water bodies from drug manufacturing plants. It proposes that environmental reference concentrations and maximum tolerable concentrations are adopted for each API.

As bee populations decline, exposure of pollinators to pesticides is of increasing concern. Italian research has now demonstrated that an index of exposure which accounts for insect behaviour, as well as pesticide application, provides a valuable tool for assessing the realistic risk of pesticides to pollinators.

A new tool has been developed which highlights ‘hot spots’ of pharmaceutical pollution in Europe, where human health and aquatic environments could potentially be affected. The results suggest that the substances and locations posing the greatest risk are not the same for the aquatic environment as for human health.

Debate exists as to whether environmental concentrations of the hazardous substance hexachlorobenzene (HCB) should be measured in water or in wildlife when assessing compliance with environmental quality standards (EQS). New research has proposed a method to calculate concentrations in water that best represent critical levels in wildlife, and a tiered approach to compliance assessment that minimises sampling of wildlife.

A guide has been published on the known and potential health and safety effects of human exposure to graphene. It is designed to help inform those working with graphene and graphene-based nanomaterials and could be especially useful as a growing number of industries begin to experiment with and use these materials.

A new method for mapping the spread of oil released by ships is presented in a recent study, where it is applied to the Adriatic and Ionian Seas of the Mediterranean. The method pulls together a range of data, including information on shipping routes, oil particle behaviour, currents and climate. In this case study, it reveals pollution hotspots in the south-western Adriatic Sea and north-eastern Ionian Sea.

Vermicomposting livestock manure with maize can increase agricultural benefit by 304%, shows a new study. The combination of increased crop yield and the additional earthworms produced as a result of the process led to a substantial increase in output compared to a traditional composting system.

New research has combined two different techniques for identifying hazards and assessing risks into a single dynamic risk assessment process. The new approach fills a gap in many current risk assessment techniques as it can be applied throughout the lifetime of a process, not just during its design phase, taking into account new information to update risk assessments and calculations systematically.

A methodology for assessing ‘chemical footprints’ has been developed by researchers to evaluate human pressures and the impact of chemicals released by the production and consumption of goods. The study integrates a life-cycle approach with different methodologies, such as those developed in the context of environmental risk assessment and sustainability science, with the aim of assessing the extent to which chemicals impact on ecosystems beyond their ability to recover (i.e. surpass planetary boundaries).

Wastewaters from fruit-packaging plants may contain preservative chemicals. When spread onto fields, these wastewaters affect the way soil microbes cycle nitrogen, new research has found. Although this may impair crop growth, according to the authors, the results could also lead to the development of new substances that reduce nitrate run-off from agricultural land.

Growing sugar beet varieties which are resistant to their pest, the cyst nematode, is the best way to achieve high sugar yields in northern Germany, recent research has concluded. The researchers say this method is better than growing trap crops or using pesticides to control the pests.

Sewage sludge and manure are sometimes added to soil to improve crop production. However, these ‘natural fertilisers’ may contain not only nutrients and organic matter but also antibacterial agents. This study investigated their impact on the microbes in soil, revealing an increase in antibiotic resistance genes. The researchers recommend greater efforts to remove antibiotic residues from wastewater and manure.

A species of mussel has been used to investigate the connectivity of two marine protected areas (MPAs) along the central Portuguese west coast in a new study. The chemistry of mussel shells was used to trace the dispersal routes for larval mussels, demonstrating that the Arrábida MPA is an important source population in the area.

New figures on how much titanium dioxide nanomaterial (TiO2-NM) could be released into the environment from photocatalytic cement — a new type of self-cleaning cement — are presented in a recent study. Based on experimental test results, the researchers estimate that between 0.015% and 0.033% of photocatalytic cement’s TiO2-NM content could potentially escape over several years of cement use, depending on the level of cement porosity. The study could help inform environmental risk assessment of TiO2-NM, as well as safer design of nano-products (i.e. commercialised products incorporating nanomaterials).

A new study has mapped levels of chemical elements found in European agricultural soils. In most places, unusually high concentrations are linked to geology, such as high levels of arsenic in the Massif Central in France. Human activity is to blame in some small areas, for example high concentrations of mercury were found near London and Paris. Abnormal concentrations, both too low and too high, could pose an environmental risk. This new data can be used in conjunction with the REACH Regulation1 and can help identify areas where action may be needed in relation to toxic elements in the environment.

According to most EU legislation, regulatory assessment of chemicals should make use of all available and relevant studies. However, in practice, assessments tend to be predominantly based on research sponsored and provided by industry as part of their legal obligations to show safety of their products, rather than on independent peer-reviewed findings. To bridge this science–policy gap, a team of Swedish researchers, in combination with regulators at three Swedish governmental agencies, have published a list of recommendations aimed at increasing the regulatory usability and impact of academic research. This advice is aimed at researchers, for whom it clarifies relevant regulatory data requirements and quality criteria. However, it is also relevant to policymakers, in that it highlights the advantages and availability of relevant, reliable peer-reviewed research for use in the regulatory assessment of chemicals. The study’s recommendations contribute to the formulation of more science-based, sustainable policies.

If the EU is to combat resource scarcity, it is necessary to develop and refine strategies for substituting raw materials with sustainable alternatives, such as recovered by-products from waste. A recent study presents a new approach for evaluating the sustainability of raw materials’ substitutions, based on the quantification of the embodied energy (energy required to produce the material from ores and feedstock) and carbon dioxide footprint (greenhouse gasses produced and released into the atmosphere during the production of the material) of both the raw material and its proposed substitute. The evaluation method has been applied to a real case, where it indicates that substituting a raw material (calcite) with stabilised fly ash for use as a filler in polypropylene composites in plastic manufacturing may be sustainable. The study also highlights the need for additional policy tools and legislation to encourage Europe’s transition towards a circular economy.

Innovatively designed batteries offer a way for vehicles to move away from their dependence on fossil fuels. There has been little mass-market uptake of new battery design, however. In the last century, only four types of battery have been used: manganese oxide; lead acid; nickel; and lithium ion, which is a relative newcomer, introduced in 1991. To understand how innovation moves from research and development (R&D) to application and the mass market, scientists perform technology lifecycle (TLC) analyses, often focusing on R&D and basic research. This study adds an additional indicator — start-up companies — to explore the early phases of how batteries transition from science into industry.

The title function is the third most commonly-used function in my 13 years of writing this blog, after imshow and imread. You have probably all used this function many times.... read more >>

Today, I'm writing about how to create animated PNG (APNG) files, such as this one:... read more >>

Today I will show you how I plotted this treble clef symbol in MATLAB:... read more >>

Someone recently challenged me to convert the curling simulator we published a few years ago (See this post and this post) to take advantage of new features not available at that time: App Designer and Stateflow for MATLAB.... read more >>

A new liquid has been designed to selectively capture sulphur dioxide emissions, one of the primary causes of acid rain. The capture process is reversible so the sulphur dioxide can be released at a later stage. This means, for example, that sulphur dioxide could be captured from power plants and reused later in other industrial processes.

A new study highlights the need for new policies to stop the rise of nitrogen oxide emissions in China. The researchers suggest that the positive impact of policies to reduce sulphur dioxide emissions are not enough in themselves to avoid soil acidification, as they will be outweighed over the next decade by the impact of nitrogen emissions.

Fine particles in the air produced by road transport trap more radiation in the earth's atmosphere than previously estimated, and therefore may contribute more to global warming than realised, according to new research. In contrast, the impact of particles from shipping appears to reflect more radiation than previously thought, whilst the effect of particles from aviation is comparatively small.

A new report suggests that underground carbon storage projects in Europe could lead to positive and negative effects on air pollution, depending on the pollutant in question. Carbon capture and storage (CCS) is considered in European legislation as a ‘bridging technology’ – a medium-term solution to climate change. Although the overall air quality impact of CCS is expected to be positive, the legislation notes that the technology should not be seen as a replacement for commitments to developing a greener and more energy-efficient economy.

New research has modelled the impacts of Athens and Istanbul in the eastern Mediterranean, on local and regional air quality. Results indicate that the impacts of megacity pollution vary significantly according to the time of year and that air quality improvements will require coordinated efforts within the eastern Mediterranean region and beyond.

Cyclists with pollution monitors and GPS trackers attached to their bicycles have produced detailed maps of Antwerp’s air quality, as part of a recent study. Their data show that a gap of just a few metres between cycle lanes and cars significantly reduces cyclists’ risk of inhaling high levels of ultrafine particle pollution.

Setting cycle and footpaths further back from the road can significantly lower the amount of air pollution that cyclists and pedestrians inhale, suggests new research. While wide gaps are not always practical, the study shows that even small increases in distance could substantially reduce the dose of pollution.

Careful planting and pruning is needed to ensure that air pollution in tree-lined streets is minimised, new research suggests. While planting trees in urban areas can have many benefits, such as enhancing biodiversity, trees can trap particulate matter pollution, say the study’s authors.

Citizen scientists have helped to map pollution across the Netherlands using their smartphones. Their results, produced by thousands of volunteers, are presented in a study which shows how a combination of mass participation and smartphone technology can be a powerful approach to environmental monitoring.

It is important to understand the extent to which atmospheric (air) pollution damages plants (i.e. its phytotoxicity) as well as the wider ecosystem (i.e. its ecotoxicity). For this reason, researchers have adapted the Organisation for Economic Cooperation and Development (OECD) Vegetative Vigour Test1 for the assessment of the ecotoxicity of samples of aerosol (suspensions of fine solid particles or liquid droplets in air). Typically, the test involves spraying the trial liquid on above-ground portions of the plant, such as the leaves. The adapted protocol involves extracting water-soluble aerosol compounds from aerosol samples to spray on the plant. The new protocol is sensitive enough to determine phytotoxicity and establish a clear cause–effect relationship, and as such has the potential to serve as a useful tool for the assessment of the effects of air pollution on environmental and human health.

Air pollution via small particulate matter (PM) from diesel fumes and other sources is of growing concern in urban areas, and contributes to poor air quality. In European urban areas, PM pollution often exceeds World Health Organization (WHO) safe levels for human wellbeing. In response to this, the European Commission has encouraged researchers to develop a low-cost, sustainable material that captures these particles in order to clean the air1. This study created a new PM capture material using sustainable chemical processes where the carbon footprint and energy use of the production process of the remediation material is taken into account. The newly developed porous material is called ‘SUNSPACE’ (an acronym derived from ‘(SUstaiNable materials Synthesized from By-products and Alginates for Clean air and better Environment’).

Researchers have developed a new computer model to help decision-makers quickly assess proposed strategies to cut air pollution, by generating an array of useful data and maps in under half a minute. The model uses artificial intelligence (AI) technology to quickly make sense of the complex problem of urban air quality, and innovatively considers the influence of public opinion in its assessment of emission reduction strategies — given that some are deemed more socially acceptable than others.