Archives, Room Use Only - TK5811.B83 1920

Concern is growing among healthcare experts who believe that if people do not follow the lockdown or social distancing seriously, the situation can quickly go out of control.

Health Ministry to send central teams to 10 States.

A select list of stories to read before you start your day

The transmission of the optical components of the Bernina branch of the Aramis beamline at SwissFEL has been measured with an X-ray gas monitor from DESY and compared with a PSI gas detector upstream of the optical components. The transmission efficiencies of the Mo, Si and SiC mirror coatings of the Aramis beamline and the various other in-beam components were evaluated and compared with theoretical calculations, showing an agreement of 6% or better in all cases. The experiment has also shown the efficacy of the high-harmonic rejection mirrors at the Bernina branch of the Aramis beamline at SwissFEL, and characterized the transmission efficiency of the on-line spectrometer in the Aramis beamline. The theoretical transmission of the mirror coatings match the experimental data to within 7%. The accuracy of these measurements was checked against a radiative bolometer from a Japanese collaboration and found to agree to a level of 4% or better. Further comparisons with a diamond detector from a US-based inter-institute collaboration demonstrated a good agreement for the attenuator settings of the beamline.

In transmission X-ray microscopy (TXM) systems, the rotation of a scanned sample might be restricted to a limited angular range to avoid collision with other system parts or high attenuation at certain tilting angles. Image reconstruction from such limited angle data suffers from artifacts because of missing data. In this work, deep learning is applied to limited angle reconstruction in TXMs for the first time. With the challenge to obtain sufficient real data for training, training a deep neural network from synthetic data is investigated. In particular, U-Net, the state-of-the-art neural network in biomedical imaging, is trained from synthetic ellipsoid data and multi-category data to reduce artifacts in filtered back-projection (FBP) reconstruction images. The proposed method is evaluated on synthetic data and real scanned chlorella data in 100° limited angle tomography. For synthetic test data, U-Net significantly reduces the root-mean-square error (RMSE) from 2.55 × 10−3 µm−1 in the FBP reconstruction to 1.21 × 10−3 µm−1 in the U-Net reconstruction and also improves the structural similarity (SSIM) index from 0.625 to 0.920. With penalized weighted least-square denoising of measured projections, the RMSE and SSIM are further improved to 1.16 × 10−3 µm−1 and 0.932, respectively. For real test data, the proposed method remarkably improves the 3D visualization of the subcellular structures in the chlorella cell, which indicates its important value for nanoscale imaging in biology, nanoscience and materials science.

A versatile, compact heater designed at National Synchrotron Light Source-II for in situ X-ray nano-imaging in a full-field transmission X-ray microscope is presented. Heater design for nano-imaging is challenging, combining tight spatial constraints with stringent design requirements for the temperature range and stability. Finite-element modeling and analytical calculations were used to determine the heater design parameters. Performance tests demonstrated reliable and stable performance, including maintaining the exterior casing close to room temperature while the heater is operating at above 1100°C, a homogenous heating zone and small temperature fluctuations. Two scientific experiments are presented to demonstrate the heater capabilities: (i) in situ 3D nano-tomography including a study of metal dealloying in a liquid molten salt extreme environment, and (ii) a study of pore formation in icosahedral quasicrystals. The progression of structural changes in both studies were clearly resolved in 3D, showing that the new heater enables powerful capabilities to directly visualize and quantify 3D morphological evolution of materials under real conditions by X-ray nano-imaging at elevated temperature during synthesis, fabrication and operation processes. This heater design concept can be applied to other applications where a precise, compact heater design is required.

Whole-mount (WM) platelet preparation followed by transmission electron microscopy (TEM) observation is the standard method currently used to assess dense granule (DG) deficiency (DGD). However, due to the electron-density-based contrast mechanism in TEM, other granules such as α-granules might cause false DG detection. Here, scanning transmission X-ray microscopy (STXM) was used to identify DGs and minimize false DG detection of human platelets. STXM image stacks of human platelets were collected at the calcium (Ca) L2,3 absorption edge and then converted to optical density maps. Ca distribution maps, obtained by subtracting the optical density maps at the pre-edge region from those at the post-edge region, were used to identify DGs based on the Ca richness. DGs were successfully detected using this STXM method without false detection, based on Ca maps for four human platelets. Spectral analysis of granules in human platelets confirmed that DGs contain a richer Ca content than other granules. The Ca distribution maps facilitated more effective DG identification than TEM which might falsely detect DGs. Correct identification of DGs would be important to assess the status of platelets and DG-related diseases. Therefore, this STXM method is proposed as a promising approach for better DG identification and diagnosis, as a complementary tool to the current WM TEM approach.

Enhancement of X-ray excited optical luminescence in a 100 µm-thick diamond plate by introduction of defect states via electron beam irradiation and subsequent high-temperature annealing is demonstrated. The resulting X-ray transmission-mode scintillator features a linear response to incident photon flux in the range 7.6 × 108 to 1.26 × 1012 photons s−1 mm−2 for hard X-rays (15.9 keV) using exposure times from 0.01 to 5 s. These characteristics enable a real-time transmission-mode imaging of X-ray photon flux density without disruption of X-ray instrument operation.

A historical tool for crystallographic analysis is provided by the Hilton net, which can be used for manually surveying the crystal lattice as it is manifested by the Kikuchi bands in a gnomonic projection. For a quantitative analysis using the Hilton net, the projection centre as the relative position of the signal source with respect to the detector plane needs to be known. Interplanar angles are accessible with a precision and accuracy which is estimated to be ≤0.3°. Angles between any directions, e.g. zone axes, are directly readable. Finally, for the rare case of an unknown projection-centre position, its determination is demonstrated by adapting an old approach developed for photogrammetric applications. It requires the indexing of four zone axes [uvw]i in a backscattered Kikuchi diffraction pattern of a known phase collected under comparable geometric conditions.

BEATRIX, is a new tool for performing data analysis of energy-resolved neutron-imaging experiments involving intense fitting procedures of multi-channel spectra. The use of BEATRIX is illustrated for a test specimen, providing spatially resolved 2D maps for residual strains and Bragg edge heights.

Efforts to control brucellosis in the Greater Yellowstone Area (GYA) should focus on reducing the risk of transmission from elk, which are now viewed as the primary source of the infection in new cases occurring in cattle and domestic bison, says a new report by the National Academies of Sciences, Engineering, and Medicine.

FAIRFAX - Drivers on I-66 between Route 7 (Leesburg Pike) and Route 243 (Nutley Street) should expect delays and plan to use alternate routes during...

One reason flu transmission is thought to be lower during the summer months is because of the high humidity.

Genesys, LLC has demonstrated a working prototype generating up to 40 Kilowatts from one standard solar panel (200 watts) with certified third-party validation along with being granted a US Patent

Leading Transmission Repair and Auto Maintenance Shop in Mission Viejo Continues to Provide Quality Work and Outstanding Customer Service

Transmission of rate cuts to improve further: RBI Guv Shaktikanta Das

The company's consolidated net profit stood at Rs 146.7 crore in the quarter ended March 31, 2019.

DALLAS, March 23, 2020 — The American Heart Association, the world’s leading nonprofit organization focused on heart and brain health for all, has released interim guidance for resuscitation care intended specifically for patients with known or suspected...

In a wireless communication system, a compact control signaling scheme is provided for signaling the selected retransmission mode and codeword identifier for a codeword retransmission when one of a plurality of codewords being transmitted over two codeword pipes to a receiver fails the transmission and when the base station/transmitter switches from a higher order channel rank to a lower order channel rank, either by including one or more additional signaling bits in the control signal to identify the retransmitted codeword, or by re-using existing control signal information in a way that can be recognized by the subscriber station/receiver to identify the retransmitted codeword. With the compact control signal, the receiver is able to determine which codeword is being retransmitted and to determine the corresponding time-frequency resource allocation for the retransmitted codeword.

A method and user equipment for simultaneous transmission of a first set of information bits and a second set of information bits by a user equipment, either separately encoded utilizing transmit power or rate matching to increase successful decoding of a set of information bits, or jointly encoding using a priori knowledge or bit positioning to increase successful decoding. Also, the use of joint coding where a first set of information bits is encoded first and then encoded with a second set of information bits, and modulation symbol mapping are provided.

A packet transmission/reception apparatus and method is provided. The packet transmission method of the present invention includes acquiring a source payload including partial source symbols from a source block, generating a source packet including the source payload and an identifier (ID) of the source payload, generating a repair packet including a repair payload corresponding to the source payload and an ID of the repair payload, generating a Forward Error Correction (FEC) packet block including the source and repair packets, and transmitting the FEC packet block. The source payload ID includes a source payload sequence number incrementing by 1 per source packet. The packet transmission/reception method of the present invention is advantageous in improving error correction capability and network resource utilization efficiency.

The present disclosure relates to a method for detecting a parity error in a sequence of DQPSK symbols of a digital transmission system, comprising determining a first demodulated symbol r1; determining a second demodulated symbol r2; determining a first parity symbol p1; determining a second parity symbol p2; determining a super-parity symbol q1; and detecting a parity error in the sequence of DQPSK symbols by comparing a combination of the first parity symbol p1 and the second parity symbol p2 against the super-parity symbol q1, wherein a parity between two DQPSK symbols describes a phase difference between the two DQPSK symbols.

A wireless communication system including a sender apparatus having a plurality of transmitting antennas that performs MIMO transmission of a plurality of data blocks; and a receiver apparatus that receives the plurality of data blocks. The sender apparatus transmits a process number via a control channel different from a data channel to the receiver apparatus, and wherein when the MIMO diversity transmission is performed, the receiver apparatus performs HARQ processing in the received data blocks based on not a process number which prevents the data blocks from competing but the received process number from the sender apparatus.

A transmission system is provided with a superconductive cable having three phase conductors and a cryostat, surrounding the phase conductors, and encasing a hollow space, for conducting a cooling agent. For the three phase conductors, a common neutral conductor is provided, being made of electrically normally conducting material, carried out as insulating round conductor and placed outside the cryostat and next to it. The cryostat is made of a circumferentially enclosed, thermally insulated sheath.

A cooling system includes a first section of high temperature superconducting (HTS) cable configured to receive a first flow of coolant and to permit the first flow of coolant to flow therethrough. The system may further include a second section of high temperature superconducting (HTS) cable configured to receive a second flow of coolant and to permit the second flow of coolant to flow therethrough. The system may further include a cable joint configured to couple the first section of HTS cable and the second section of HTS cable. The cable joint may be in fluid communication with at least one refrigeration module and may include at least one conduit configured to permit a third flow of coolant between said cable joint and said at least one refrigeration module through a coolant line separate from said first and second sections of HTS cable.

A system and method for data communication connecting on-line networks with on-line and off-line computers. The present system provides for broadcast of up to the minute notification centric information thereby providing an instant call to action for users who are provided with the ability to instantaneously retrieve further detailed information. The notification centric portions of information is wirelessly broadcast to wireless receiving devices which are attached to computing devices. Upon receipt of the information at the personal computer, the user is notified through different multimedia alerts that there is an incoming message. Wirelessly broadcasted URL's, associated with the data, are embedded in data packets and provide an automated wired or wireless connection back to the information source for obtaining detailed data.

Accessory for a laptop computer with LCD display which is connected to the laptop serial communications port and optically transmits data to a portable information device, such as a wristwatch designed to receive data as sequential pulses of light. The accessory includes a microcomputer with an RC timebase which is calibrated each time it is used by a special internal program, so that the input baud rate to the accessory matches the communications baud rate of the data received from the laptop. The internal program also permits selection of an output baud rate for the optically transmitted data.

The system for displaying muscle force data includes a wearable patch and a remote visual display. The wearable patch carries electrodes suitable for sensing electromyographic signals on the skin of the patient. The patch carries circuitry which converts the detected electromyographic signal to a digital output which can be transmitted to the remote visual display. The circuitry relies on filtering to produce a usable digital signal at very low power consumption. The transmitted signal can be used to drive a variety of visual displays, including a conventional hand-held personal communicators and entertainment devices which had been programmed to suitably process the visual display.

Methods and apparatus are disclosed for interference mitigation of an open-access node. The method includes determining, at the open-access node, whether uplink interference from a mobile entity is above a threshold. The method includes adjusting a transmission power to trigger a hand-in of the mobile entity in response to determining the uplink interference is above the threshold. The method includes handing-in the mobile entity from a first cell in response to adjusting the transmission power. The method includes redirecting the mobile entity to a second cell different from the first cell.

This specification describes a method and corresponding system for reducing aggregate forward link transmission power. In one arrangement, a RAN may reduce the aggregate transmission power level in a coverage area by (i) determining which WCDs in the coverage area have a communication error rate that is at least a threshold level of communication error rate, and in response to the determining, (ii) reducing the forward link transmission power level of the determined WCDs. In another arrangement, the RAN may reduce the aggregate transmission power level in a coverage area by reducing the forward link transmission power of WCDs in the coverage area that have (i) a forward link transmission power level that is at least a threshold level of forward link transmission power and (ii) a communication error rate that is at least a threshold level of communication error rate.

A communications method implemented in a transmission point (TP) used in a coordinated multipoint transmission and reception (CoMP) system is disclosed. The communications method comprises transmitting, to a user equipment (UE), attributers for up to four indicators indicating at least physical downlink shared channel (PDSCH) resource element (RE) mapping, and transmitting, to the UE, one of the four indicators, each of which is conveyed in 2 bits, wherein the four indicators comprises ‘00’, ‘01’, ‘10’, and ‘11’ corresponding to a first set, a second set, a third set, and a fourth set of parameters, respectively. Other methods, apparatuses, and systems are also disclosed.

A double ring network system configured with two or more transmission stations each including a pair of bi-directionally communicative communication ports, including any adjacent two transmission stations as terminal stations, and any transmission station as a base, as mutually connected in a ring form by communication ports through a transmission line, for intercommunications between transmission stations, in which the transmission stations are each adapted to determine whether or not frame signals are received from adjacent transmission stations, transmit route identifying frame signals for identification of routes to adjacent transmission stations, when having failed in reception, and set own station as a terminal station substituting for a current terminal station, when having received no responses to the route identifying frames from adjacent transmission stations, so they are kept from arriving at ring-like connected subsequent transmission stations.

There are provided a power transmission chain which can reduce a noise level further by eliminating unfavorable combinations from a random arrangement of combinations of pitch lengths and pin shapes and a power transmission system using the same power transmission chain. With respect to pitch length, links include two types of a link L1 which has a small pitch length and a link L2 which has a large pitch length. With respect to pin shape, pins include two types a pin P1 of which a curvature of a rolling contact surface is large and a pin P2 of which the curvature of the rolling contact surface is small. The links are arranged so that a possibility is avoided that a combination of (L2, P2) and a combination of (L2, P1) come immediately after a combination of (L1, P2) in a chain traveling direction, and that a possibility is adopted that a combination of (L1, P2) or a combination of (L1, P1) comes immediately after the combination of (L1, P2).

In the present invention, one or both of an active wheel or a passive wheel is composed of an eccentric transmission wheel and is combined with a synchronous transmission belt for forming an eccentric wheel transmission wheel series, so that when the feet input forces at different angles from the treadle shafts of the treadles to an active wheel shaft combined on the active wheel through cranks, the active wheel forms different transmission speed ratios relative to the passive wheel according to the treadle angle, and random inward packing is performed to the transmission belt (100) of the engage end of the eccentric passive wheel (413) during the transmission for stabling the operation.

A vehicle powertrain has an engine, a driving shaft having a passage defined therein, a driven shaft, a pump, a hydraulic fluid reservoir, and a CVT. A driving pulley of the CVT includes a fixed sheave and a movable sheave disposed on the driving shaft for rotation therewith, a spring biasing a movable sheave away from the fixed sheave, and a CVT chamber fluidly communicating with the passage of the driving shaft. The pump supplies hydraulic fluid from the reservoir to the passage in the driving shaft. The hydraulic fluid flows from the passage to the CVT chamber to create a hydraulic pressure in the CVT chamber. The hydraulic pressure in the CVT chamber biases the movable sheave toward the fixed sheave.

A belt-type stepless transmission is provided with: an input shaft; an input pulley having a stationary sheave and a movable sheave; a transmission shaft disposed parallel to the input shaft; an output pulley having a stationary sheave and a movable sheave; a belt wound around the input pulley and the pulley; an output shaft disposed coaxially with the transmission shaft; and a cam mechanism having a sheave-side cam which is provided and affixed to the movable sheave and a shaft-side cam which is provided and affixed to the output shaft and causing the sheave-side cam and the shaft-side cam to make contact with each other to thereby enable the transmission of torque between the movable sheave and the output shaft and apply an axial pressing force corresponding to the torque to the movable sheave.

A continuously variable transmission for a vehicle comprises a primary pulley, a secondary pulley, and a belt entrained around both pulleys in an opposite manner between the fixed and movable sheaves thereof. One pulley carries a selectively deployable stop that may be placed into position to mechanically limit the range of motion between the fixed and movable sheaves. This establishes an actual maximum transmission ratio that is larger than the nominal minimum transmission ratio but smaller than the nominal maximum transmission ratio achievable by the transmission during normal operation thereof. When such a transmission is used on a utility vehicle attached to a substance dispensing applicator operatively driven by the vehicle's engine, the application rate stays substantially constant despite changes in engine speed when the user keeps the transmission upshifted to the actual maximum transmission ratio set by the position of the deployed stop.

A belt-type continuously variable transmission for a vehicle includes: a primary pulley including a first fixed sheave fixed to an input shaft, and a first movable sheave relatively non-rotatable and relatively movable in axial direction to the input shaft due to spline-fitting of a female spline formed on an inner circumferential portion thereof to a male spline formed on the input shaft; a secondary pulley including a second fixed sheave fixed to an output shaft in parallel with the input shaft, and a second movable sheave relatively non-rotatable and relatively movable in the axial direction to the output shaft due to spline-fitting of a female spline formed on an inner circumferential portion thereof to a male spline formed on the output shaft; and a transmission belt, the belt-type continuously variable transmission for a vehicle disposed with at least one of a first groove width defining portion disposed on the primary pulley for defining a maximum groove width of the first pulley groove and a second groove width defining portion disposed on the secondary pulley for defining a maximum groove width of the second pulley groove, the first groove width defining portion and the second groove width defining portion being disposed on one shaft of the input shaft and the output shaft, and the other shaft having a uniform shaft diameter in an range of sliding of the first movable sheave or the second movable sheave in the axial direction except a site with the male spline formed, the other shaft being disposed on the opposite side to the one shaft.

An arrangement for supplying oil to a chain drive which drives a transmission oil pump that is axially offset relative to a torque converter and embedded in an intermediate plate in a vehicle having a torque converter. The driven sprocket of the chain drive is supported by a converter neck mounted in a centering plate. A seal is provided between the converter neck and the sprocket and is arranged adjacent the sliding fit between the converter neck and the sprocket. To compensate for the suppression of lubrication of the seal, the neck bearing and the chain drive, a valve is integrated in the intermediate plate, and a duct is provided in the plane, in which the centering plate is screwed to the intermediate plate, such that excess oil flowing from the valve is selectively directed to the seal, the neck bearing and the chain drive.

In a silent chain transmission, noise performance is improved by preventing guide plates of a silent chain from contacting sprocket teeth before the link plates of the chain contact the sprocket teeth. The silent chain transmission comprises a silent chain in engagement with a sprocket. The silent chain comprises guide rows, each having a pair of guide plates and a plurality of middle link plates, and non-guide rows, each having a plurality of inner link plates. An engagement starting point of the middle link plate with a sprocket tooth and an engagement starting point of the inner link plate with the sprocket tooth are set at positions such that the guide plate is prevented from contacting the sprocket tooth before the respective link plates start to engage the sprocket tooth when runout of the chain in the direction of its width occurs.

A chain belt-type continuously variable transmission in which ratchet-type chain belts are wound on driving and driven pulley devices, each of which has a variable diameter, in order to control the shift ratio. Driving belt supports are disposed in a driving pulley device so as to radially contract and expand. Driven belt supports are disposed in a driven pulley device so as to radially contract and expand. Teeth in the front portions of the driving belt supports and the driven belt supports and teeth in the rear portions of the driving belt supports and the driven belt supports are oriented in opposite directions. Front and rear ratchet gears formed on the driving belt supports and the front and rear ratchet gears formed on the driven belt supports are oriented in opposite directions and are arranged in alternating positions without being formed at corresponding positions in a line.

A belt-driven continuously variable transmission having a downsized torque cam assembly for creating forward thrust to push a movable sheave toward a fixed sheave. The belt-driven continuously variable transmission is adapted to output a torque while changing a speed ratio continuously by altering an effective diameter position of a driving belt. The belt-driven continuously variable transmission is comprised of: an output gear, which is fitted onto the rotary shaft of the driven pulley to output the torque while being allowed to rotate relatively; a piston, which is fitted onto the rotary shaft of the driven pulley between the movable sheave and the output gear while being allowed to rotate integrally with the movable sheave and to reciprocate in an axial direction of the rotary shaft, and which increases an internal pressure of the hydraulic chamber by moving toward the movable sheave; and a torque cam assembly, which is interposed between the piston and the output gear, and which pushes the piston toward the movable sheave when the torque transmitted through the driven pulley is increased.

A transmission system for vehicles, including bicycles, is disclosed. The system aligns a chain or other drive means to a center of each of a plurality of provided sprockets, allows for a smaller, lighter and more durable shifter/controller, and reduces various complications associated with cable slack and shifting. A derailleur is provided with linear actuated features to directly translate drive means from one position to another along a desired path.

The present invention is structured by using one or both of an active wheel and a passive wheel being composed of an eccentric transmission wheel and being combined with a synchronous transmission belt for forming an eccentric wheel transmission wheel series, so that in the reciprocal treadle performed by the human's feet, when the feet input forces at different angles from the treadle shafts of the treadles to an active wheel shaft combined on the active wheel through cranks, the active wheel forms different transmission speed ratios relative to the passive wheel according to the treadle angle.