With global consumers becoming more engaged in purchasing food products that fit into their specific lifestyle choices and address sought-after health claims, the latest findings revealed by Innova’s Global New Products Report demonstrate that almonds are a key ingredient in new introductions that are tailored to fit consumers’ specific lifestyles and health goals.

For the sixteenth consecutive year, almonds are the top nut in global new product development according to Global New Products data from Innova Market Insights, having been first recognized as the number one nut globally in 2006.

The Almond Board of California (ABC) announced the kickoff of its national Tastemaker Trials student competition, which invites U.S. college and university students to create delicious almond-based snack products that excite the tastebuds of younger generations and set a new standard for "intentional indulgence" in snacks.

Crunchy Nut Toppers are available now online and in-stores nationwide in four flavors including bacon-free Smoky Bacon Walnuts, dairy-free Garden Ranch Walnuts, Glazed Walnuts, and Glazed Pecans.

Almonds are a key ingredient that can help broaden dietary options in snack products through their wide variety of forms that help introduce new flavor experiences and offer many health benefits.

Prepared Foods talks about clean label formulating with Campbell's Foodservice executive chef Gerald Drummond and Alan Slesinski, director of R&D.

HighKey launched Almond Flour Crackers. Available in Sea Salt and Cheddar flavors, HighKey's Almond Flour Crackers have only 1 to 2g of net carbs per serving—making them an alternative for people on low carb and keto diets.

Catalina Crunch®'s extensive line of cereals, cookies and snacks has gained widespread recognition for its emphasis on providing cleaner products that are low sugar and high protein without compromising on flavor. 

Fishman Flooring’s new president Shane Richmond discusses the benefit of Employee Stock Ownership Plans, succession planning and the future of flooring distribution. 

Through a partnership with Wolfe's Neck Center, KIND will have line of sight to ensure over 30% of its almond supply chain is leveraging regenerative practices on a mass-balance basis by 2025.

The Raimondi LAB330 and LAB270 bridge wet saws are capable of cutting large format tiles up to 330 cm (10.8’).

I have an upcoming booking at La Residence Phou Vao in Luang Prabang -- which was a Belmond when I booked. I have just received this message from them: ---Quote--- As a most-valued guest, I want to update you on the latest information from La...

Children's Geographies; 10/01/2024
(AN 180134750); ISSN: 14733285
Academic Search Premier

A cold front marching through the region pushes scattered showers and a few thunderstorms eastward across Wisconsin through Monday morning and into the afternoon. Rain chances return from the south overnight and spill into a wet Tuesday.

A welcome soaking for parts of Minnesota.

Cloudy skies and scattered showers will persist into Sunday morning as a low-pressure system tracks from southeastern Minnesota into central Wisconsin. Temperatures will cool briefly to seasonal averages on Monday, followed by a warm-up and breezy winds as the week wraps up.

Expect lingering cloud cover into Sunday night, with northwesterly winds picking up. A dry cold front will pass through, causing temperatures to dip slightly on Monday. After that, a pleasant warming trend is expected through the end of the work week.

Chilly high pressure has settled in behind the weekend system. High temperatures will be cooler Monday and Tuesday, but near normal. The next chance of rain develops Wednesday. 

In the 1980s, Prince wrote one of the Bangles' biggest hits, 'Manic Monday.' Now, The Prince Estate has released the demo version of the track as part of the artist's posthumous album, Originals.

Sinch, the company developing the way the world communicates through its Customer Communications Cloud, has released its predictions for the 2024 Black Friday and Cyber Monday (BF/CM) shopping season.

[Culture] :
The culture ministry and the Korea Craft and Design Foundation are once again promoting Korea's traditional attire, or hanbok, with the seventh annual Hanbok Culture Week set to start Monday.  Exhibits will be on display and fashion shows will take place in Seoul's Jongno District and other areas of the ...

[more...]

[Economy] :
The benchmark Korea Composite Stock Price Index dipped 29-point-49 points, or one-point-15 percent, on Monday to close at two-thousand-531-point-66. The tech-heavy KOSDAQ slid 14-point-54 points, or one-point-96 percent, to close at 728-point-84.

[more...]

[Economy] :
South Korea’s benchmark Korea Composite Stock Price Index(KOSPI) slipped below the two-thousand-500 threshold on Tuesday for the first time since August’s “Black Monday.” The KOSPI dipped 49-point-09 points, or one-point-94 percent, on Tuesday to close at two-thousand-482-point-57. In the ...

[more...]

Recently, there has been a high demand for elucidating kinetics and visualizing reaction processes under extreme dynamic conditions, such as chemical reactions under meteorite impact conditions, structural changes under non­equilibrium conditions, and in situ observations of dynamic changes. To accelerate material science studies and Earth science fields under dynamic conditions, a submillisecond in situ X-ray diffraction measurement system has been developed using a diamond anvil cell to observe reaction processes under rapidly changing pressure and temperature conditions replicating extreme dynamic conditions. The development and measurements were performed at the high-pressure beamline BL10XU/SPring-8 by synchronizing a high-speed hybrid pixel array detector, laser heating and temperature measurement system, and gas-pressure control system that enables remote and rapid pressure changes using the diamond anvil cell. The synchronized system enabled momentary heating and rapid cooling experiments up to 5000 K via laser heating as well as the visualization of structural changes in high-pressure samples under extreme dynamic conditions during high-speed pressure changes.

The beamline optics and endstations at branch B of the Versatile Soft X-ray (VerSoX) beamline B07 at Diamond Light Source are described. B07-B provides medium-flux X-rays in the range 45–2200 eV from a bending magnet source, giving access to local electronic structure for atoms of all elements from Li to Y. It has an endstation for high-throughput X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) measurements under ultrahigh-vacuum (UHV) conditions. B07-B has a second endstation dedicated to NEXAFS at pressures from UHV to ambient pressure (1 atm). The combination of these endstations permits studies of a wide range of interfaces and materials. The beamline and endstation designs are discussed in detail, as well as their performance and the commissioning process.

Beamline B21 at the Diamond Light Source synchrotron in the UK is a small-angle X-ray scattering (SAXS) beamline that specializes in high-throughput measurements via automated sample delivery systems. A system has been developed whereby a sample can be illuminated by a focused beam of light coincident with the X-ray beam. The system is compatible with the highly automated sample delivery system at the beamline and allows a beamline user to select a light source from a broad range of wavelengths across the UV and visible spectrum and to control the timing and duration of the light pulse with respect to the X-ray exposure of the SAXS measurement. The intensity of the light source has been characterized across the wavelength range enabling experiments where a quantitative measure of dose is important. Finally, the utility of the system is demonstrated via measurement of several light-responsive samples.

The diagnostics of X-ray beam properties has a critical importance at the European X-ray Free-Electron Laser facility. Besides existing diagnostic components, utilization of a diamond sensor was proposed to achieve radiation-hard, non-invasive beam position and pulse energy measurements for hard X-rays. In particular, with very hard X-rays, diamond-based sensors become a useful complement to gas-based devices which lose sensitivity due to significantly reduced gas cross-sections. The measurements presented in this work were performed with diamond sensors consisting of an electronic-grade single-crystal chemical-vapor-deposition diamond with position-sensitive resistive electrodes in a duo-lateral configuration. The results show that the diamond sensor delivers pulse-resolved X-ray beam position data at 2.25 MHz with an uncertainty of less than 1% of the beam size. To our knowledge this is the first demonstration of pulse-resolved position measurements at the MHz rate using a transmissive diamond sensor at a free-electron laser facility. It can therefore be a valuable tool for X-ray free-electron lasers, especially for high-repetition-rate machines, enabling applications such as beam-based alignment and intra-pulse-train position feedback.

The paper considers the possibility of using the diamond-silicon carbide composite Skeleton® with a technological coating of polycrystalline silicon as a substrate for X-ray mirrors used with powerful synchrotron radiation sources (third+ and fourth generation). Samples were studied after polishing to provide the following surface parameters: root-mean-square flatness ≃ 50 nm, micro-roughness on the frame 2 µm × 2 µm σ ≃ 0.15 nm. The heat capacity, thermal conductivity and coefficient of linear thermal expansion were investigated. For comparison, a monocrystalline silicon sample was studied under the same conditions using the same methods. The value of the coefficient of linear thermal expansion turned out to be higher than that of monocrystalline silicon and amounted to 4.3 × 10−6 K−1, and the values of thermal conductivity (5.0 W cm−1 K−1) and heat capacity (1.2 J K−1 g−1) also exceeded the values for Si. Thermally induced deformations of both Skeleton® and monocrystalline silicon samples under irradiation with a CO2 laser beam have also been experimentally studied. Taking into account the obtained thermophysical constants, the calculation of thermally induced deformation under irradiation with hard (20 keV) X-rays showed almost three times less deformation of the Skeleton® sample than of the monocrystalline silicon sample.

A state-of-the-art multilayer deposition system with a 4200 mm-long linear substrate translator housed within an ultra-high vacuum chamber has been developed. This instrument is engineered to produce single and multilayer coatings, accommodating mirrors up to 2000 mm in length through the utilization of eight rectangular cathodes. To ensure the quality and reliability of the coatings, the system incorporates various diagnostic tools for in situ thickness uniformity and stress measurement. Furthermore, the system features an annealing process capable of heating up to 700°C within the load-lock chamber. The entire operation, including pump down, deposition and venting processes, is automated through user-friendly software. In addition, all essential log data, power of sputtering source, working pressure and motion positions are automatically stored for comprehensive data analysis. Preliminary commissioning results demonstrate excellent lateral film thickness uniformity, achieving 0.26% along the translation direction over 1500 mm in dynamic mode. The multilayer deposition system is poised for use in fabricating periodic, lateral-graded and depth-graded multilayers, specifically catering to the beamlines for diverse scientific applications at Diamond Light Source.

High-pressure crystallographic data can be measured using a diamond anvil cell (DAC), which allows the sample to be viewed only along a cell vector which runs perpendicular to the diamond anvils. Although centring a sample perpendicular to this direction is straightforward, methods for centring along this direction often rely on sample focusing, measurements of the direct beam or short data collections followed by refinement of the crystal offsets. These methods may be inaccurate, difficult to apply or slow. Described here is a method based on precise measurement of the offset in this direction using a confocal optical device, whereby the cell centre is located at the mid-point of two measurements of the distance between a light source and the external faces of the diamond anvils viewed along the forward and reverse directions of the cell vector. It is shown that the method enables a DAC to be centred to within a few micrometres reproducibly and quickly.

VMXm joins the suite of operational macromolecular crystallography beamlines at Diamond Light Source. It has been designed to optimize rotation data collections from protein crystals less than 10 µm and down to below 1 µm in size. The beamline has a fully focused beam of 0.3 × 2.3 µm (vertical × horizontal) with a tuneable energy range (6–28 keV) and high flux (1.6 × 1012 photons s−1 at 12.5 keV). The crystals are housed within a vacuum chamber to minimize background scatter from air. Crystals are plunge-cooled on cryo-electron microscopy grids, allowing much of the liquid surrounding the crystals to be removed. These factors improve the signal-to-noise during data collection and the lifetime of the microcrystals can be prolonged by exploiting photoelectron escape. A novel in vacuo sample environment has been designed which also houses a scanning electron microscope to aid with sample visualization. This combination of features at VMXm allows measurements at the physical limits of X-ray crystallography on biomacromolecules to be explored and exploited.

The agenda for the next meeting of the Catawba County Board of Commissioners, 9:30 a.m., Monday, April 4, 2011, 1924 Courthouse, Newton, is now available.

With the two side shooters Dymond DSV and Dymond D Monoblock, Minebea Intec presents two new products for its premium portfolio in the field of horizontal X-ray inspection.

A few weeks ago, I was able to fly to Nashville for a few days to participate in the Almond Board of California's annual food trends tour.

Blue Diamond's first-ever chocolate-covered product line boasts half the sugar of the average chocolate-covered almonds.

The Almond Board of California (ABC) welcomes Charice Grace to the organization as new manager of trade marketing and stewardship.

The California Almond Board recently hosted a virtual orchard tour for media and nutrition professionals, from May 18–19, 2021.

Snack of almonds vs. a high-carbohydrate snack food resulted in a lower blood glucose response and fewer calories consumed over the course of the day.

By investing in research-based, cutting-edge solutions that contribute to a circular economy, the almond sector is identifying new and valuable uses for everything grown in the orchard.

The Regeneration and Sustainability Award honors trailblazing work by Treehouse California Almonds and The Almond Project partners to advance sustainable farming methods in California’s almond industry.

The purchase allows Once Again to increase efficiencies and reduce environmental impact for its West Coast industrial customers seeking high-quality ingredients for baked goods, bars, and more.

Wonder Monday has reimagined cheesecake with just 2g sugar, 3g net carbs, 10g clean protein, and nothing artificial. 

Available in four flavors, the product can be sprinkled on salads or eaten as a snack.

Recent research found 70% of ranch usage occurs outside the salad bowl, presenting an opportunity to introduce a flavor that consumers are craving across all food varieties.

Diamond of California, the century-old producer of “Made for Homemade” specialty nuts, has announced the launch of a new chocolate flavor, of their ready-to-use Nut Pie Crusts, available now on both store shelves nationwide, and online with Amazon. 

Just in time for fall, Diamond of California has launched its Pumpkin Pie Spice Nut Pie Crust, a seasonal Walmart exclusive flavor of their beloved Ready-to-Use Nut Pie Crust.

Blue Diamond's festive treat that combines the flavors of rich chocolate and creamy frosting with the signature crunch of almonds.

Consumers can delight in Dunkin's festive favorites, like its Cookie Butter Donut, plus its new almond croissant.

The acquisition expands Mondelez International’s portfolio into faster-growing, on-trend, better-for-you areas.

This year’s report also provides insights and recommendations on how to turn these trends into action to encourage consumer engagement and to stand out from the competition.