Oh dear, busy me, four months since I've posted here. Lots of quilting, a little beading, some travels, and recently several sets of house guests have made "retirement" a bit of a joke. For now, since the La Conner Quilt Festival is just around the corner (October 2-4), my subject is one small exhibition on the first floor at the Museum, which is currently up, and will remain through the Festival.

Last year at the Festival (and again this year!) Sue Spargo taught workshops on her wool applique embroidery methods. Those of us who were lucky enough to get in were invited by the Museum to exhibit our finished pieces. These marvelous creations are the subject of this post. Uneven lighting makes it difficult to get good photos, so please forgive poor color or tone on some of these photos.

In case you are unfamiliar with Sue's work, below is an example of her work. Students in her class could choose to make chicks, circles, or flowers. Most chose the chicks. Eight of her students are showing their work in the current exhibit.

My vote for the most awesome-creative piece goes to Bunny Starbuck for She Has Flown the Coop! Here it is:

Having put my chicks all in neat rows similar to Sue's example, I find it amazing that Bunny's mind took the idea and made a whole different story of it... a coop full of chicks, with two in line on the roof ready to follow the one already in the air. Don't you just love the way the lines divide the space?!




Note Bunny's use of whispy yarn to suggest little chick feathers, her use of snaps for eyes, the one chick turned full front, the one with a bead-tassled braid and glasses, and the one with beaded loop fringe and a gathered yellow ribbon (?) yo-yo. I love them! I'm in awe, Bunny!

Below is Chicks on Parade by Dorie Benson. It's so fun the way they are so close together, with two of them going in a different direction, just as you might see in a little cluster of chicks. If you click the photo to enlarge it, you can see some of Dorie's excellent stitching and hand quilting!

The next one is Chicks by Glenys Baker, who not only did all 36 chicks but also made a second quilt featuring circles (shown further down). Awesome work, Glenys!

And next is Birds of a Feather Can Dance Together by Lorraine Jones. The fun of the title is matched by the fun of Lorraine's embellishments, including her border treatment. (You'll have to see this one in person, because the light from a table lamp, made the lower corner of the photo look terrible.)

I guess most of us like to "swim the other way," as you can see in the next piece, Chickadees, by Carrie Unick. I thought many of Corrie's embellishments were especially fun and creative, so I've also included a couple of detail photos.



Last of the chicks is my piece, simply named Chicks. It was so much fun, that I made another small piece (also in the exhibition), shown at the top of this post. Both are displayed in shadow-box type frames to protect them from dust and moth damage.
Glenys Baker, in one year, made not only a 36-chicks quilt (shown above), but also a 48-circles quilt, Circles. How she keeps thinking of new embellishment variations I can't imagine. Yet each of her circles is completely unique! Her choice of border fabrics is perfect for the quilt, complimenting the flow of color among the circles.


I love the fun color combinations and the way the beads enhance her embroidery on Nancy Anders' Bodacious Blooms, a joyful wall quilt if ever there was one! (Again, I couldn't quite get the color right in the photo, so you'll just have to go to the Museum to see it in person.)


The name of Roberta Roberts' flower quilt, Memories, invites us to look closely at the flower with three ladybugs. I don't know the story, but I can tell there is one here... and I love that. Her embellishments are varied and fun as well.



There you have it... 10 quilts by 8 students who learned some methods of wool applique and embroidery from Sue Spargo, last year at the La Conner Quilt Festival. I'm so grateful to be one of them!

If you're a Beadlust reader, you know I worked for three years (more than 1,300 hours) to hand piece, hand embroider, and hand quilt Mama's Garden, with 4,700 3/4-inch hexies, a true labor of love. A big push this spring got it finished in time to enter into the International Quilt Festival in La Conner, WA. Hooray, hooray, the judges accepted it into the show!!!!

This coming weekend, October 2-4, all you quilting enthusiasts will find it rewarding to make the effort and get to La Conner (WA) for the Festival, where you will see an excellent selection of quilts and fiber arts, plus a variety of interesting vendors! Here is the information. Head first for Maple Hall, a huge 2-story building, filled with quilts, at the corner of 1st Street (the main drag) and Douglas Street! Bring your camera, because photos are allowed (at least in the past they were).

What do you think? After all those hours, would it be crazy to even THINK about making another hexie quilt, another one with 3/4-inch hexies? Well, then I guess I'm crazy, because the irresistible call of the hexie hooked me again. And why not re-use the same paper pieces?

This one will not be traditional, and will definitely NOT be hand quilted. It will be hand pieced, using small left-over fabrics (I refuse to call them scraps), cotton prints (but not batiks). I have no idea how I will arrange them, how big it will be, or anything else about how this new project will develop.

The first step was to cut out sets of  2" x 2" squares (6 per set) to make flower petals. So far, I've cut about 130 sets. Here are 80 of them, ready to baste onto the 3/4" paper hexie pieces.

From very small pieces, I cut single 2"  x 2" squares to make flower centers. These I've already basted to the paper hexie pieces.

After basting some of the petals and centers, I started choosing centers for the petal sets. This part is fun! I enjoy "auditioning" various centers until one of them seems right. I'm avoiding high value contrast between petals and centers, because I might want to do a color study with them (no borders).

When the urge gets really strong, I allow myself to start stitching the hexies together to make flowers.

This quilt will probably have about 650 flowers! I've cut 130 so far, each different. I cut flower petals from all of my small pieces, every one. My preference is to have all 650 flowers different.

Sooooooo, if YOU have some small fabric pieces you'd be willing to donate, I'd love to have part of you in my quilt. This is what I need:

The quilting community is awesomely generous!!!  Thanks to all who have sent me scraps for making hexie flowers:


I really understand and appreciate that it takes time to sort through your scraps, selecting some that you feel might work for me, packing them to send, getting them to the post office. In some cases, you even took time to cut them into 2" squares for me... WOW! Bless your hearts!

The most interesting thing is that all the fabrics I've received so far are ones I might have picked myself, yet so far there are no duplicates. As of Oct. 19th, I have cut petal sets for about 650 flowers (from my own scraps and fat quarter stash, as well as scraps I've received from other quilters), all of them unique! That's about 90% of what I need to make the quilt, and certainly enough to keep me busy for a looooooong time. It will probably take me a year or so to baste and stitch all of the flowers, although I admit to going at it with a lot of gusto.

I'm making 3/4" hexies, which means each of the six sides measures 3/4 of an inch. For these I need to cut 2" squares. (At the end of this post there is a table showing the size of fabric squares that corresponds to each of the standard sizes of hexie paper pieces.) To make each hexie flower, I need 6 squares for the petals and 1 square for the center. This is how I cut them.

The first thing I do, is sort my scraps into piles by size. The easiest to work with are strips. These I iron, sort by approximate width, and stack 6 strips high, aligning the top and right side edges. Then I cut each stack of 6 strips to exactly 2" wide by slightly more than 14" long. From each one of the strips, I will get one set of petals and one center. After cutting 5 stacks of strips (a total of 30 different fabrics), line them up next to each other as shown above, and cross-cut 2" squares through all of the strip piles at once.


Now, pick up the piles of 2" squares, and place them in stacks, alternating the orientation as shown above.


Next, use dressmaker's shears to trim the corners off of each of the piles. Each pile has 6 fabrics, so you are trimming 6 at a time. Re-stack them as shown above. Note that there are only 6 piles in each row. The 7th pile in each stack, I have set aside to use for centers. These I keep separate from the petal sets, selecting a center for each petal set later in the flower-making process.


The final step is to separate each of the piles into 6 separate piles, one for each of the fabrics. You will end up with 30 singles piles, or petal sets, each with 6 of the same cut and corner-trimmed fabric, enough to make 30 hexie flowers.

Certainly there are other, and even possibly more efficient ways to cut fabrics for hexies, but this way works well for me. Some quilters recommend using the squares without trimming the corners. I tried it that way, but went back to corner-trimming because I like not having the extra bulk toward the centers of each hexie. I'm especially glad I trimmed the corners on my Grandmother's Flower Garden hexie quilt, because it was that much less to stitch through in the hand-quilting process.

Sometimes, the fabric scraps are not strips, or would more effectively be cut as a chunk rather than strip. Basically it's the same process. I stack 6 different fabrics, aligning the top and right hand edges. From this stack, I cut a 4 x 6 inch block, and then cut that in half to make two 2 x 6 inch strips. I align the strips the same way as the 14" strips above, cross-cutting several at one time, and finish the same way as described above.

Fabric Cutting Guide for Different Sizes of Hexies

1/4" hexie  --- cut 1" squares
1/2" hexie  --- cut 1-1/2" squares
3/4" hexie  --- cut 2" squares
1" hexie ------ cut 2-1/2" squares
1-1/4" hexie - cut 3" squares
1-1/2" hexie - cut 3-1/2" squares
2" hexie ------ cut 4-1/2" squares
3" hexie ------ cut 6-1/2" squares
4" hexie ------ cut 8-1/2" squares
6" hexie ------ cut 12-1/2" squares

A very handy, and more complete cutting guide is available from Paper Pieces, which is where I get my pieces. Nope, I don't cut my own; too boring, and I really like the precision of die-cut paper pieces!

For a lot more helpful tips on making a hexie quilt, please see these posts:

Grandma's Flower Garden - 3/4 Inch Hexie Quilt - Time Study

Hand Quilting a Hexie Quilt

Hexie Quilt - Embroidery Quilting in Flower Centers

Hexie Quilt - Paper Pieces are GONE + Tips

Hexie Quilt - To Fix or Not to Fix

Hexie Quilt Top - Almost Finished

Hexies Galore - Grandma's Flower Garden

Grandma's Flower Garden Quilt - I'm Doin' It!

My brother, Thom Atkins, is a very talented quilt and bead artist!

He's written a popular book about how to make beaded quilts.


Recently he sent me a wonderful birthday present - a box of his scraps to use for making hexie flowers for my in-progress, hand-pieced, hexie quilt. Forty-nine different fabrics makes quite a stack of flowers.


Here they are again, this time arranged on a flat surface (click photo to enlarge for details). It's way fun to play with the flowers, re-arranging them in different ways, re-stacking them, and then spreading them out again.


All the while I was cutting, basting, and stitching these flowers I was thinking about Thom, about our history and our mutual love of stitching. I recognized most of the fabrics. One was in a quilt we made 19 years ago for our mom's 80th birthday. Some were from blouses, dresses, shirts he made for himself and his wife. Some were from pillows and other home decor he made for their home. Some were from his early quilts. Most of them brought up a ton of memories for me!

I always like (and sometimes love) things that Thom makes, and yet I've also noticed when we are in a fabric store together, we do not gravitate toward the same fabrics. I wouldn't have guessed that I would use almost every one of the fabric scraps he sent. There were a few that were too glitzy, had a stronger metallic look than I like. But 90% or more could have come from my own stash. That's how much I like them.... leaving me to conclude that we are more alike than I thought.


Here we are as kids... book ends.  Me 16 months older than him.

What's it like when brother and sister, close in age, are both quilters and beaders, both of us entering our quilts in shows, both of us teaching workshops and writing books?

Are we competitive?

A little, but not very much in my opinion. I admit to being a little "nervous" when he took up bead embroidery a few years after I make it the focus of both my art and my career. In artistic matters, he has a quicker learning curve than I do, rapidly achieving excellence in any medium he tries.

The fact that he likes bling and representational, while I like matte and symbolic, makes our work look different, which helps. We're also very different in our approach to quilt designing. While I am heavily influenced by traditional quilts, his quilts are all "art quilts." Most of his are heavily beaded, while mine are mostly not. Right from the start, he usually has a complete "picture" in his mind of what his quilt will look like when finished; whereas I rarely have a clue what mine will be like until I'm nearly finished with it.

Nor have we had issues with our teaching. I mostly teach beaders, emphasizing bead embroidery techniques rather than projects. He mostly teaches quilters, concentrating on methods for sewing beads onto quilts. There are enough teaching opportunities for both of us to accept as many gigs as we can handle.

What's the best thing about our mutual passions for beading and quilting?

Well, we talk on the phone for hours at a time about our current projects. Our conversations would bore everybody else in our families to death, but for us it's exciting to share our ideas, challenges, and victories. We do it often! It seems each of us has always respected the artistic sensibility and skills of the other. It's great to have somebody you can count on to say, "That's really wonderful," when you show them your latest work.

We also share information about photography, opportunities for showing our quilts, inspirations, promotion of our books, and countless other related things. We help each other to solve problems and to grow artistically.

It seems pretty ideal; was it always like that?

If you've read my first book, One Bead at a Time, available here as a free download, you know that Thom grew up favored to be the artist in the family, showing his talents at a very early age. My bend was more academic, although I had no clear pathway. After majoring in art in college, Thom rapidly became established as an artist. After majoring in English and psychology, I muddled around in a couple of careers for many years. I didn't discover my passion for beading or start to think of myself as an artist until I was 46 years old. Until then I always admired Thom's art, but didn't relate directly to him about it. I'm glad it is different now; glad we are both talented and creative... together!

During the past 28 years of stitching beads on cloth, I've veered away from making necklaces, bracelets, and bags or purses, mostly producing wall art pieces. Thus, I've had lots of opportunities to experiment with various methods of finishing and framing my work, making it suitable for display.


I always leave ample fabric margins surrounding the actual beaded area, giving me lots of options for finishing or framing.  One simple finishing method is to wrap the extra fabric around the sides of a manufactured painting-canvas (over stretcher-bars), and lace the fabric snugly across the back, as in the photo below.


But the problem with this method, of course, is that the surface of the beading is exposed to dust and air-borne grime, which over the years may spoil the fresh look of the beading, aging the piece prematurely. So we look to frames and glass to protect our work.

Among the various methods for covering (and protecting) beadwork with glass, the following is the one I use most frequently, and like the best.  It's not very expensive, or particularly difficult, although it does take a bit of time. Even if you already know about frames, please take a look at the section called Preparing Your Bead Embroidery for Framing in the Tutorial below.

Tutorial: How to Frame bead Embroidery

Choosing a Frame

Oh dear, I'm sorry to have neglected posting here for so long. Although many suitable topics and photos have passed through my mind and camera, there just hasn't seemed to be a nice chunk of time available for putting it all together. Today is the day to begin again!

Inspired by Alice, by Marilyn Lidstrom Larson of Willow City, ND (detail of border)

For the past two months, it's been all about quilts and quilting for me, with beading taking a bit of a back seat for a while. My quilt and travel buddy, Lunnette, and I flew to Ontario, California for The Road to California, which is a ginormous quilt show with more than 1,000 quilts on exhibition and over 200 vendors. We gawked (and spent all of our allotted budget) for 3 whole days, barely noticing our fatigue and sore footies.

There are several intriguing subjects to cover, inspired by our experiences there. Today's post is about traditional applique and machine quilting.

Inspired by Alice, by Marilyn Lidstrom Larson of Willow City, ND photo credit (for this photo only): Road 2 CA

Inspired by Alice, by Marilyn Lidstrom Larson, detail showing back

Inspired by Alice, by Marilyn Lidstrom Larson, detail of center

Inspired by Alice, by Marilyn Lidstrom Larson, detail of center quilting

Inspired by Alice, shown in the photos above, won the first prize of $1,000 in the Traditional, Wall, Applique category of the main (judged) exhibit! Take a moment to study the pictures, click on them to enlarge them, notice the way the applique and machine quilting compliment each other. Also think about what this might have looked like if the maker, Marilyn Lidstrom Larson, had hand-quilted her work the way Alice, her grandmother (and inspiration for the central portion of the quilt), would have done. I love this quilt, totally love it, and believe it deserved the award it received.

At the same time, it saddens me that in all the juried/judged shows I've seen (and entered) recently, there is no category specifically for hand sewn quilts... quilts which are hand-pieced, hand-appliqued, hand-embroidered, and/or hand-embellished, and finished with hand-quilting. Nope, hand-sewn quilts are judged right along with machine-sewn quilts. In my observation, machine-quilted pieces are the ones that win almost all the prizes, even in the traditional categories. Why is that? Is hand-quilting considered passe, a thing of our grandmothers' time? Is it because machine-quilting has more pizzazz in the viewers' and makers' eyes? Is it because the machine manufacturers are huge financial supporters of these shows and providers of much of the prize money? Is it because the machine manufacturers run the training programs for judges?

OK, let's look into this subject a bit more. Later, I'll tackle the subject of the influence of the machine manufacturers. For now let's consider this question:

Does machine-quilting enhance quilts that are otherwise hand-sewn?

I started cutting scraps of fabric to make hexie flowers on September 1, 2015. After 9 months of labor, I have just finished stitching the 733rd flower!  I'll do the math for you... That's 5,131 hexies. They are small ones, 3/4 inch per side. The finished flowers measure just under 4" in diameter.


To give you an idea, this is what 44 hexie flowers look like. In case you don't know, for each hexie, the fabric is cut, and then basted over a paper, hexagon-shaped form. The hexies are then hand-stitched together to make the flowers. It takes about 1 hour to make one hexie flower, start-to-finish; thus 44 hours to make the batch above. Click the photo to see better detail of this process, which is called English paper piecing.


And here are all 733 hexie flowers! Each flower is a different fabric. Although a few of the flower petal fabrics were also used for flower centers, I'm certain that there are over 1,000 different fabrics used in these flowers.

What's next? Well, I'm going to build a design wall using sound-proofing foam-board covered with a king-sized flannel sheet. I haven't quite figured out how to make it yet.

When the design wall is ready, I'll get out my hexie flowers and start to "paint" with them. Who knows what will emerge? Not me. I only have a vague idea that I might want to try "painting" an abstract view of our island shoreline.

When the "painting" process is finished, I'll stitch the flowers together in small groups, and then stitch the groups together. The result, hopefully in my lifetime, will be a queen-sized, non-traditional style, hexie quilt!

Thanks to everybody who shared scraps of fabric for me to use!

*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

For those interested, here is a link to a "time study" and photos of my previous hexie quilt, Mama's Garden!

Last November an odd, rather hard, bump suddenly appeared in the palm of my right hand. A few weeks later, in a routine physical exam, I asked my Dr. what the lump might be. She thought it was a harmless, ganglion cyst. In January, suddenly two more lumps appeared in the same area of my palm, about 1.5 inches below my little and ring fingers. Feeling some concern about this, I made an appointment with a hand specialist, a surgeon, who told me with absolute certainty that I had Dupuytren’s Disease.

You can skip this paragraph if you are not so interested in the disease in general. In the following paragraphs, I’ll tell you about my personal experience with it so far... Some other names for Dupuytren’s Disease are: claw hand, Viking disease, palmar fascia contracture, and flexion contracture. Because it often causes one or more fingers to curl inward toward the palm, it is sometimes confused with trigger finger, an entirely different affliction. It is linked to heredity, Northern European descent, diabetes and other auto-immune diseases. Men are more likely to have it than women, and its incidence increases in older (over 50) folks for both men and women. Often it is dormant until there is injury or trauma to the hand(s). There are currently four categories of treatment: radiation therapy (successful only in the very early developmental stage of the disease), needle aponeurotomy (generally considered for stage 1 or 2 of the disease with 6 to 90 degrees of deformation), collagenase injection (also stage 1 or 2), and surgery (advanced stages).

This is a copy-machine scan of my right hand in August, 2012. At that time, I probably had the disease, but there were no obvious signs of it.

This is a piece I created using the above scan. It celebrates the many blessings of my hand. Who knew that 4 years later it would be in jeopardy.

If you know me at all, you know that I love to stitch! Give me a needle and thread, a few beads or layered fabric that needs hand-quilting, and I am in heaven. If I couldn’t stitch, I’d be miserable. Already, I noticed (in January) that my right (dominant) hand was losing flexibility and strength. I dropped things all of the time because my grip was not as strong. And I could not spread my fingers or flex them backwards. The progression was alarmingly fast at that time, and affected my ability to hold and control a needle, scissors, etc.

To be honest with you, the past two months (Oct. and Nov.) have been miserable for me because of the election campaign and results. Now, finally, the cloak of despair, the fog of depression, is lifting a little.

One evening, as I noticed the challenge kit from the La Conner Quilt Museum on top of my quilting to-do pile, a flicker of an idea passed through my brain. Then, as I awoke the next morning, the flicker became a small flame, which in turn lead me to accept an invitation to spend an afternoon quilting with some friends, which (in order to have something to work on) got me rooting through my fabric stash.

Now, quilters, beaders, and artists of all types, will recognize the phenomenon caused by physically touching your materials, supplies, and tools. Suddenly your wearisome thoughts of the election (or whatever else got you down) are gone! You fondle your stuff lovingly, and with great anticipation, you make the first cuts, fanning the flame, turning it into a nice warm fire. Ah, saved from the chilly fog, at last!

My journey out of the fog began with this vintage block from a quilt that someone, somewhere, started long ago, but never finished. It, along with many others, was donated to the La Conner Quilt Museum. The Curator, Kathleen Kok, not knowing what she would do with all the vintage blocks donated over the years, just kept them in a corner waiting for an idea to form. And form it did!

Every year the Museum has a challenge as a fundraiser, showcasing the entries at the annual Quilt Festival. For 2017, the challenge theme is "Time" and the material provided in the kit is one of the vintage blocks from their collection. The block above is the one I picked. It is just so cheerful... how could I resist? Hand pieced, it wasn't perfectly sewn, but still I fell instantly in love with it. Mine for a $10 contribution!

Of course, it was just the block. In the photo above, I have already layered it with backing and batting, and then hand quilted it.

My idea is two-fold. (1) Since the "time" theme can be portrayed by a transition from these early fabrics to modern fabrics, I decided to repeat the block using Kaffe Fassett fabric scraps left over from my shimmer quilt. (2) Feeling powerless in the face of impending doom after the election, I had to find some ways to assert my beliefs, and this quilt was to be one of them. I've long been concerned about the ever-increasing world population, about all the small, yet constant ways overpopulation is damaging and destroying the natural systems of the planet. So the title will be: Under the Quilts, Time Flies, and Population GROWS. My idea is to illustrate this concept using both color and beads. You'll see.

First though, a few words about making the modern block. At first I tried to make a pattern for the "flower/star" by tracing one of the triangles from the back side. I hand-stitched the required 16 pieces together FOUR different times, varying the seam allowances each time, trying to get it to lie down flat. Obviously, I did not correctly copy the original, because when I finally sewed it so it was nice and flat, it was also too small. Grrr.

A smart quilt friend (thanks Tori) suggested I trace a section from the right side of the block and add 1/4 inch seam allowances all around. Good idea, but there were small differences between the sections... which one to trace? Trying to answer that question, looking at the block, I finally saw how the pattern was derived! (Light bulb!!!)

It's two overlapping squares of the same size, one on point and one not. All it took was to measure the sides of the squares on the original block (which averaged 8.5 inches), cut them out of paper, fold the diagonals and sides, put a pin through the centers to join them, rotate the top one until the folds lined up, tape the two together, and draw along the fold lines. Voila! Now, all I had to do was cut out one of the half-points, add my quarter-inch seam allowances, and there was the perfect pattern for my new block. The rest went quite quickly, and below you can see the quilted result. (Note: I added quarter-inch seam allowances to each of the pattern pieces shown above to get the final cutting pattern.)


You might be wondering why I've layered and quilted these blocks. How will they be joined to form the quilt? The answer is they won't be joined! Instead, they will be bound as separate little quilts (each 11 inches square), and then appliqued to a separate "background quilt."

Here is how they look with the binding.


Notice that the over-all color of the modern block is darker. This matches my concern about over-population of the planet. Time flies, and the population GROWS, making the world a darker place for me, as many species become stressed and obsolete, as the desert lands grow and the forests shrink, as potable water becomes polluted and scarce, as crowded people war with each other. You know. If you watch the documentaries and contribute to various environmental causes, you know. Darker.

Thus, the quilt also becomes darker as the eye travels from top to bottom. Here is how it looks with the two blocks on the background quilt, the transitioning colors from light to dark, representing about 70 years in time passing (estimating the date of the fabrics in the vintage block at approximately 1946). This is an extremely tiny period of world history, but one in which world population sky-rocketed from 2.3 billion to 7.4 billion.

You can probably see the little heart beads, but if you click to enlarge the photo, you'll see them more clearly. The pair at the top represents a couple. They dive under the quilt, have some fun, and produce four lovely children (between the two blocks). These four pair up, dive under the quilt, resulting in 16 children. Under the quilts, time flies, and the population GROWS. That's m' story, and I'm sticking to it.

Now, here's a question for you loyal readers who have come so far with me on this thing.  The quilt looks really pretty the way it is. But originally, I had planned to do more beading on it.  I planned to bead several vines circling the outer border of the quilt (not the binding). Across the top of the quilt, the vines would be light green, with many green leaves, bright-colored flowers, and some critter beads/charms (bees, birds, bears, fish). As the vines trailed down the sides, they would become darker, until at the bottom they would be beaded with dark brown, black, and darkest greens, with no critters, and only a few dark flowers. The visual message (I hope) would be, "this is what happens when we overpopulate the world." What do you think... leave it like it is now or bead the borders?

Global Population Information

Think of it this way. Every single month increasing world population adds another Los Angeles AND another Chicago to the planet. That's 24 gigantic cities worth of people added EVERY year; more than 240 giant cities every 10 years. Imagine how many cities full of people will be added in your life time. Crunch the numbers and see what you think.

Evidence of heavy population demand on resources is all around us. Global aquifers are being pumped 3.5 times faster than rainfall can naturally recharge them. Eventually they will run dry, perhaps as soon as 75 years. Topsoil is being lost 10-40 times faster than it is formed.  Feeding all 7+ billion of us is increasingly difficult, impossible actually.

There is no technology solution to accommodate the increasing demand of uncontrolled global population growth. The only solution is voluntary one child per couple for a couple of generations, on a Global participation level. If all countries followed the lead of countries with the lowest birth rates (Taiwan, Spain, Portugal, South Korea, and Poland), we could reach a more sustainable Global population of 3 billion by 2100!

Please, talk about this with your child-bearing-aged kids, grand kids, students, etc. We teach environmentally sound practices in most schools, write books and make documentary films about issues like clean water, over-fishing, fracking, etc. But rarely does the topic center on overpopulation. Be proactive. Make it happen.

If you are willing to read (or listen to an audio book) to learn more about Global population, Count Down is an excellent read.

Here is a link to the previous bead embroidery pieces (and poems) I've made concerning population growth.Thank you for reading all the way to the end, and for anything you can do to help people understand what we need to do.

This fabric is called Kékfestö in Hungarian, a word that roughly translates as blue-dyed or blue-dying. Producing these fabrics is a cottage industry in Hungary, which dates back several centuries. The dye is indigo; the cloth is cotton; and the long, arduous process results in a type of batik fabric. The photo above shows a small fold of each of the fabrics I bought at the blue-dyed studio shown below. (As always, please click on the photos if you'd like to see more detail.)

When in Hungary in October, 2016, my quilting/travel friend (Lunnette) and I, as guests of my Hungarian bead sister, Anna Fehér, had the very exciting experience of visiting the hand-dying studio of Miklós Kovács in the little village of Tiszakécske, SE of Budapest. The studio, located behind his home, includes two rooms, one for printing the raw cloth with a wax resist, and the second for dying the printed cloth with indigo. In front of the building, you can see rods above the deck, which are used for hanging the fabric to dry after it is dyed, and a wagon loaded with printed cloth ready to be dyed.

Meet Mr. Miklós Kovács, now in his 80s! Charming and animated, he is explaining his traditional, hand-dying process to Anna. Blue-dying has been the Kovács family's livelihood since 1878, each new generation being trained by the previous Master. It is strictly a family affair. Miklós, his wife, Margit, and their two daughters, Gabriella and Mária, currently produce about 10,000 meters of Kékfestö (blue-dyed) fabric every year. When Mr. and Mrs. Kovács retire, the business will pass to their daughters. This post shows how they turn plain white cloth into beautiful fabrics with white motifs on an indigo background.

First, they need thousands of meters of fine-quality, tightly-woven, raw cotton cloth, which is rinsed to remove impurities, then carefully ironed and rolled onto wooden rods which fit onto the printing machine. This pile of untreated cotton cloth, manufactured in Turkey, is the remainder of a big shipment purchased at the start of the year.

Next they need a print block or plate. These are made with wire pins of various diameters, which are pounded into blocks of dense wood. Here you see the many plate choices available in the Kovács studio, each yielding a different motif on the fabric. The length of each print block is the same as the width of the fabric; the width is the width of the pattern repeat, generally designed to be about 4.5 inches..

This is the end of one of the print blocks, showing how the design is formed by setting metal pins of different diameters into the wooden block.

And here is the fabric (after dying it with indigo, and removing the wax resist), which was printed with the block in the photo above it. Naturally, a half-meter of this one came home with me!

This is the machine which is used to print the motif on the raw cotton cloth with a wax resist. Mr. Kovács keeps his printing machine, built in Germany 120 years ago, in good running condition with machinist skills he learned alongside his father.

You can see the sprocket, lower right, which is adjusted to advance the fabric through the machine in increments exactly the length of the pattern repeat. For most motifs, the fabric advances 4 to 5 inches after each time the print block is applied to the fabric, thus revealing the next short stretch of un-printed cloth.

Here you can see many meters of raw cotton cloth, suspended on a metal rod at the back of the printing press. There is a leader of waste cloth stitched to the end of the roll which has been fed through the rollers of the machine to get the process started.

At the front of the printing machine, a worker swipes a tray with wax resist, which is tinted green so that it will be visible on the printed cloth. The printing block touches down on the waxed tray, picks up a coating of was, and then presses firmly against the fabric.

After being imprinted with wax resist, the fabric is wound up and down through a drying rack located behind the printing machine.

When it is dry, the printed fabric is folded and stacked until there is a sufficient quantity to begin the dying process. You can see that some of the raw cloth in this pile was pre-dyed pink, blue, or beige. After over-dying with indigo and removing the resist, the motif on these pieces will be pink, blue or beige with an indigo background, rather than the much more common white motif with an indigo background.

This close-up photo shows how the fabric looks after the wax resist (tinted green so that is shows on white cloth) is dry. This is the motif being printed while we were there. Liking the design a lot, I was very pleased to find finished fabric in this pattern available to purchase.

And this is how the cloth will look after it is dyed with indigo, the wax resist removed, and the fabric washed and ironed. As you might have already guessed, a half-meter of this one came home with me!

As we watch the cloth passing slowly through the rollers of the printing machine, Lunnette holds a scrap of dyed fabric which was tied to the machine, indicating the motif currently being printed.

At last, we get to the dye pot!  Here on the burner, a concentrated indigo dye formula is being readied to pour into the dye vat.

Don't forget to wear those heavy rubber gloves, or the skin on your hands will be tinged with blue for a long time.
Mr. Kovács gave a long, animated talk (all in Hungarian, which I only slightly comprehend) about the whole process of blue dying. You've already seen how the cloth is printed with wax resist. The next step is to dye the background.

The cloth is dyed in a vat with the indigo dye-bath at 85 degrees C., then washed to remove the wax and rinsed to remove the excess dye. After rinsing, the cloth is looped over racks to dry outdoors, which completes the dying process. Sadly, he did no dying while we were there, so I don't have pictures or first-hand experience with precisely how it is done to share with you.

However the fabric is not yet ready to use. It must be starched, dried, and then pressed using both steam and steel rollers with heavy pressure, in order to create the traditionally desirable shiny finish on the cloth. Finally, the fabric is folded onto bolts for distribution to shops and end-users.

We learned how they hand-print motifs on cloth using a template, such that after dying, the fabric can be cut out and hemmed as a finished table cloth. You can see the templates hanging on the wall. The desired template is placed over the fabric, and a pencil used to mark the registration points for lining up the printing block. Fabrics which have already been printed are stacked in front of the templates. After being dyed, this fabric will be made into table cloths and runners of various sizes.

This is a section of cloth which as been marked with a template, and hand-stamped with wax resist. After dying with indigo and removing the wax, it will be made into a rectangular table cloth with a lovely double border all the way around.

Mrs. Kovács demonstrates for us how she lines up the print block with the penciled registration marks, and then lowers it onto the fabric. With the stamp resting on the cloth, she lightly pounds it with her fist to set the wax into the fabric. It was obvious to us that carefully making each wax impression all the way around the cloth takes a lot of time and concentration. As you an see below, the results of her hand-printing are stunning!.

Here is an example of a hand-stamped, indigo-dyed fabric made into a round table cloth. Obviously, it came home with me, and is perfect for my kitchen table!  This fabric is quite wide, and takes a great deal of space and time to print. Yet, the prices were very reasonable!

After spending several hours in the studio, we were invited to the house for a shopping bonanza! Fortunately, hoping ahead of time that we would be visiting a Kékfestö studio when we got to Hungary, we had saved our allowances for some months, and were prepared to shop for future quilting and sewing projects. The prices, ranging $10 to $15 per meter depending on the width, seemed very reasonable considering the quality of the fabric, and the extreme amount of work that goes into producing it.

In addition to yardage, both of us bought a table cloth and an apron. Mine is shown above.

What a totally delightful experience we had! Mr. and Mrs. Kovács are as friendly and nice as can be!  If you ever get to Hungary, you can find their fabrics and finished products in the picturesque town of Szentendre, just a short drive or train ride north of Budapest on the Danube River. Here is a website link.

To end our visit at the Kovács studio, here is a tribute photo of the elder Mr. Kovács, who during his boyhood in the 1920's was immersed in the world of his family's blue-dying business, and who continued producing Kékfestö indigo-dyed fabrics for his entire life, while training his own son to continue the trade.

Like his father, the younger Mr. Kovács has trained his daughters to continue when he retires, although I'm sure he has many more years to go, probably well into his 90s..

My last two photos in this post are a little surprise for you. Before falling in love with beading and quilting, my main passion was Hungarian folk dancing. I danced in a performance group for 10 years (and later became one of the group's choreographers), performing at many events in the Seattle area, including Bumbershoot and the Folklife Festival. We also performed at the World's Fair when it was in Vancouver, British Columbia. I and several of the other dancers in the group made most of our costumes using Hungarian fabrics and original costumes as patterns.

It was folk music and dance that first called my heart and soul into Hungary, where I have since spent a cumulative total of well over a year of my life, spaced over 14 different visits so far.

So, here you go. This is me, wearing a costume I made with Kékfestö fabric for performing the dances of the Szatmár region, located in northeastern Hungary. This photo was taken in September, 1986 at the World's Fair in Vancouver, Canada, where we performed on two separate occasions.

And this is me on stage at a festival in Redmond, WA, happy as can be, Hungarian folk music, song and dance, filling me with joy!  Michael Kappleman and I are the second couple from the left.

So you see...  Kékfestö and I go back a long way. Next, I'll be quilting with it!

*****
My apologies to Hungarians for not using the correct accent mark for the last letter of the Hungarian word Kékfestö. I spent 4 hours trying to do it, but could not get Blogger to accept anything I tried.

I learned to create decorative painted papers from Paulus Berensohn, Albie Smith, Lynne Perrella, Anne Bagby, and others by taking wonderful workshops from them in the 1990s, and soon adapted their techniques to making books with beadwork inserted into the covers, like the one below. I use my painted papers on the book covers and for signature covers, which look great with this type of binding.

But after moving to the island where I've lived for 20 years now, I gradually got into quilting and textile arts, kept the beadwork going, and cut way back on painting. Until now!

Inspired, cajoled, and arm-twisted by one of the Textile Guild members, who wants to learn how to paint papers and make books like mine, I agreed to teach a workshop (2 days of painting and 2 days of bookmaking) for the guild members. Of course, since I hadn't painted for many years, I first had to get back into practice. Yay! What fun I've been having, painting in my shed (thankfully heated). The paper below is my favorite of about 20 painted in the last two weeks. The size is 18 x 24 inches. (Please click to see the details!)

And below are two more to go with it.  The paper above will be used for a book cover, even though it will be hard for me to cut it up. The two papers below will be cut (horizontally) into thirds, and used as signature covers. For those unfamiliar with bookmaking, a signature is a section of papers within a book. Each of the six signatures in my book will be covered with this decorative paper.


It's a fun, playful, and experimental process to paint like this, easier for me than it would be to paint figuratively (landscape, still life, or people). With this type of painting, I just mix matte medium with a color or two of acrylic paint, and apply it by rolling, stamping, stenciling in layers. I keep adding layers until I like it, at which point it's a finished paper. There is always at least part of each paper that pleases me enough to use it for bookmaking and paper arts.

These are the basic supplies and tools I use to paint the papers:

1.) Although acrylic paints and this method can be used to paint on almost any surface or paper, I usually paint on 80-90# drawing paper to make decorative papers.

2.) I prefer using a roller to apply background colors or glazes, rather than a brush. My favorite, purchased online from Dick Blick Art Supplies, is a 2.2"  dense foam roller.

3.) Assorted stamps and stencils. I carve a lot of my own stamps, as you will see below, but sometimes also use commercial stamps. Note that commercial rubber stamps with fine detail for stamping with inks do not work well with acrylics, as the paint clogs the fine lines, ruining the stamp.

4.) Assorted materials, such as a notched adhesive-spreader, coarse sea-sponge, webbed food packaging materials, and bubble wrap are useful to print, texture, and stencil.

5.) Acrylic paints. I use heavy-body paint (rather than fluid acrylics) of student-grade or better quality.

6.) Matte medium and glazing medium (slow drying) are added to extend the paint.

I know, maybe you're thinking I should do a video tutorial. OK. You set it up, and I'll do it. In the meantime, I'd rather be painting...  Here are three more recently painted papers for your viewing pleasure (I hope).



The one directly above is my attempt to emulate batik fabric from India. I had a bedspread back in the hippy 60s with a burgundy design on a mustard yellow background, the memory of which was the inspiration for this paper. I carved all of the stamps used to make it.

I love to carve my own stamps, and sometimes cut my own stencils as well. Let's take a look at that process. It's quite easy really, requiring only a block of Speedy-Carve (or other high-density rubber carving block), and a Speed-Ball Carving tool. Designs can be free cut, drawn right on the carving block, or transferred from a tracing. Here's a fairly decent tutorial on the stamp carving process.

Designs? Well, everywhere I look I see possibilities for carving more stamps! Recently, visiting a fabric store with my quilting buddies, I spied a fat quarter of batik fabric with a luscious design. Here is the fabric:

And here is the stamp I carved from a tracing I made of the central flower. The stamp is the same size as on the fabric, about 3" in diameter.

I also cut a stencil, which you can see below. A friend had a commercial stencil of these three leaves, which I really liked. After borrowing her stencil to use on one of my papers, I traced the painted image, and cut out my own stencil. The tool in this image is a Speed-Ball cutter, which I use to carve the rubber to make stamps.

You've already seen (way above) the whole sheet of paper I painted using just this stamp and stencil, but here's a detail. If you click to enlarge, you can see more about how I paint in layers, first the background colors, next the leaves, then a different color over-stencil on the leaves, and last the flowers.

If you like to play with paint, you might want to give it a try! Here are just a few more of my recently painted papers to tempt you...





I'll be teaching a 2-day bookmaking workshop in mid-May using papers like these to create three different books. There may still be a spot or two available in the class. If you are interested, you can contact me for more information.

You may want to visit my website to see more about my handmade books and painted papers. And there are several earlier posts here on Beadlust with pictures of books made with painted decorative papers and beading by my students, as well as other related topics. Here are a few of them:

1. Wedding book
2. Lisa's book (from a workshop I taught in Wisconsin); her fabulous website is here.
3. Susan's book (from a workshop I taught in Wisconsin)
4. painting papers for making Christmas cards
5. Using symbols in our art and symbols in acrylic painting  
6. Using these techniques to paint with dyes on fabric and more fabric paint/dye examples

Susan Anderson took my bookmaking/painting/beading workshop twice at the Coupeville Art Center. These are the papers for her first book, and if you click to enlarge, you can also see her finished book.

And, to close this post, here is a photo of some of the handmade books I've created over the years... most of them utilize decorative painted papers and bead embroidery.

Thanks for sticking with me to the end of this long post :)!

With very mixed feelings, sadness and joy all jumbled together, I closed my business with the state of Washington today, retroactive to December 31, 2016.

It's super great to think about never having to keep track of business miles, save receipts for every little business expense, do the tedious bookkeeping, take end-of-the-year inventory, or prepare everything for taxes.... Not ever again will I have to do any of those odious tasks!

Me, celebrating 41 years in business as Artist - Teacher - Author

On the other hand, my business has pretty much been my "identity" since 1975. That's 41 years - more than half of my life. What am I now? How will I respond when somebody asks, "What do you do?" Will I say, "Oh, I'm retired now?" Will I say, "I'm an artist?" It feels a little like I'm walking around 3/4 naked, the clothes of the past 41 years gone, the remaining artist clothes not enough to cover my nakedness.

But, we will not have any crying over spilled milk; the deed is done; the authorities officially notified. And, with respect, I thought it might be fun to share a few photos here, photos of the business me, and the story in more-or-less chronological order.

It all started when I met Liz Chenoweth, who is still my closest friend, and who at the time was studying metalsmithing at the University of Washington and I think working for a commercial jewelry manufacturing business in Seattle. I got the bug from her. After taking a short class in soldering sterling silver to make jewelry, I bought a workbench and all the tools, getting into it full-tilt-boogie! Liz helped me, teaching me all that she knew, and helping me to realize the design ideas I had.

Liz (on the right) and me in our metalsmithing shop, The Fort

I don't recall the exact date that I drove to the Department of Licensing to get my business license, but on that day, I named my business Atkins Creations, because I intended to make and sell sterling silver (and a little later, gold) jewelry. I bought a handsome, red, ledger book, and began the 41 year process of keeping track of all expenses and all income, mostly for tax purposes.

Sterling silver ring, commissioned by a male customer

New-beginnings.... in the spring of 1975, Liz and I decided to set up a metalsmithing shop in the spare bedroom in my little home in Ballard. Removing all other furniture, we put in side-by-side workbenches, and installed a polishing table/motor. We called our shop the Fort, because we were just like kids in the summer, when we couldn't wait to be in our "fort," our hideaway, our own special place. We both had day jobs, but we lived for spending time in the Fort. My job was 5 days on, followed by 5 days off, which was great because I could work with metal for 5 consecutive days at a time.

Jasper stone set in sterling silver, sterling clasp, leather cord - this is a man's necklace

We sold our work at some of the craft fairs of the time, but mostly we held "open studio" days at my home, slowly building a fairly decent client list. Eventually we made most of our money doing commissions. It was a marvelous, fun time in my life. That's for sure!

This is the display of my silver and gold creations at our second "open studio," 1977

Three years later, in 1978, I started a new "day job," one which quickly turned into something much more demanding of both my time and creative energies than had been my previous job. Soon, I could no longer continue making and selling jewelry at the previous pace. And, by the early 1980s my jewelry tools and supplies were lonely and dust covered. But, I didn't close the business officially.

Multiple strand necklace in style taught by Carol Berry

The hook was still set, because in 1987, I took a 2-day class from Carol Berry on making multiple-strand beaded necklaces. BEADS! In those two short days, I fell absolutely bonkers in love with beads, and within a few months, I was back in business again.

Multiple strand necklace I made as a "project" for Margie Deeb's book, The Beader's Color Palette

This time, I added the name Beads Indeed! to the official license, making it Atkins Creations - Beads Indeed!  Nice, huh?! Plus I quit my day job, deciding to support myself somehow with beads. Not easy. Especially for the first few years. Hard work and lots of rice for dinner. Since the selling part of making gold/silver jewelry was never fun for me, I decided to make my living this time by selling beads (just the "raw" beads, not made into jewelry) and teaching classes. If I sold a few pieces of beaded jewelry, that would be fine, but there would be no pressure to pay the bills by promoting my own creations. On the other hand, selling beads WAS fun; and buying beads to sell was even more fun!

 By 1988, I sold my metalsmithing equipment, and turned my garage into a studio/store for both selling beads and teaching beading workshops. For 10 years, that was my life, my identity... Beads Indeed!, open every Wednesday of the year, classes most weekends, open for your beading needs at any time by appointment.

It worked! I could have my cake (beading/beadwork) and eat it (selling beads and teaching classes) at the same time. You have to know that back then I did not in any way consider myself an artist. I knew I was a pretty good craftsman, making jewelry that would last and that looked great technically. But I did not think of myself as a creative person.

Generations, a small pouch, my first improvisational bead embroidery piece

The discovery (made mostly by Carol Berry, with some input by me) of "improvisational bead embroidery" in 1991 caused a shift, both in my sense of identity and my business. Gradually, stitching beads on fabric without a plan, letting a piece develop bit by bit without trying to control it, and thankfully with no intention of ever selling it, altered my perceptions about myself as a craftsman, turning me into an artist.

This was such a huge alteration of identity. It made me feel more sure of myself as a teacher, and gave me the confidence to promote my beading workshops far beyond the walls of my studio/shop. I traveled to many states, teaching at conferences, for bead shops and guilds, branching out to teach beading to quilters and fiber artists, eventually even teaching at art schools. All in all, Beads Indeed!, in Seattle turned into a pretty decent business. I could afford to eat out now and then, plus travel to far away places, like China, Germany, and Eastern Europe, on bead-buying trips.

Those 10 years, immersed in beads, with a growing sense of myself as an artist, gave me the confidence to begin writing books about beading, which in turn, provided another source of income, income I would need after moving from Seattle to San Juan Island, where I could no longer depend on selling beads to support myself because the population base was so small.

Marriage Bag, a small purse I made while deciding if I should marry Robert

That move, in 1998, was because I met Robert Demar, who a few years later became my husband. He already lived on San Juan Island, which was a plus for me, because I love it here, much more than living in a big city, even though Seattle is quite nice as cities go. After we married, I still traveled widely and fairly frequently to teach beading workshops, but I needed to fill the time when I was home and also needed to earn more money. The answer came easily... write books about beading! My first book, One Bead at a Time, was published in 2000, and was re-printed 3 times. Including two small booklets, there are currently nine books with my name as the author.

My first book, published in 2000

My most recent book, published in 2013

I guess my business identity, for the past 41 years, can be summarized as: "teacher-artist-author." But, in the last two years, it's been mostly "artist," with much less teaching and no further book writing. Business income has dwindled to a pittance, I'm 74 years old, and I don't enjoy the record-keeping. Even my accountant agreed. So today I pulled the plug on Atkins Creations - Beads Indeed!

Already there are new questions facing me, questions such as:

1. What shall I do with the remaining inventory of my book, Heart to Hands Bead Embroidery?
2. Shall I keep paying for my website (my domain name and web service), which includes my primary email address, and which badly needs to be updated?
3. Shall I continue teaching now and then, maintaining the necessary supplies to do so?
4. Can I immerse myself in creating things (quilts, art, bookmaking, beading, etc.), with no intention of doing anything with the things I create, not using them as examples when I teach, and not selling them?
5. And, of course, there's the question at the top of this post.... who am I now?

Home, one in a series of bead embroidery pieces about gratitude

 

It All Started with Hexie-lust!

Getting Hooked on Crochet

Original Crochet-Along, Frida's Flowers

Bored with making 6 identical flowers - Colors calling us!

Designing Our Afghans

Entering at the San Juan County Fair

When my brother, Thom Atkins, visited last fall, he showed me (and a few quilting buddies) his new method for designing and constructing "scrappy improv wall quilts," a technique that turned out to be a lot of fun for me, especially given my long history with an improvisational, intuitive approach to bead embroidery.

Basically, what we did was to empty our bags or boxes of scraps onto a large table and start pawing through them, pulling out ones that appealed to us at that moment. For me it was all about color - red, magenta, fuchsia, with hints of pink, golden-yellow, orange, lavender, and dark green. All of the fabrics were in my scrap box. We had two days of Thom's demonstrations and guidance. During that time, each of us in our small group produced a unique and very pleasing "piece" or "block," measuring roughly 18 x 21 inches, the size of a fat quarter.

One of my red scraps, cut in a nice arc at one end, was the start of it all because I liked the shape and the color. Next I picked up a small strip of yellow, and held it behind the arc of red. Ooooh! Nice enough to repeat. The scrap of orange/red batik was large enough to cut a similar arc, and the strip of yellow was long enough to go behind that one too. These two arcs formed the basis of my piece.

You can see the two arcs above; the lower right was the first. The yellow strip was only about 3" wide, not enough to go all the way around the arcs, but I cut two shapes that would echo the top of each of the arcs. I layered the remaining scraps from that on top of the arcs along the vertical edges of the design. Then I put a dark green scrap behind the arcs and the yellow, which set them off nicely. The rest was just filling to the edges of the quilt with more scraps, including fussy-cut leaves and flowers.

The next step was to glue it all together along the 1/4" seam overlap, working in layers from bottom to top, and cutting away the excess fabric from the underside after each piece is glued. Cutting away the excess fabric leaves a double layer of fabric only at the seams; the rest is a single layer. The glue is Elmer's School Glue, Disappearing Purple, as shown below. It is an organic stick glue, relatively easy to sew through, repositionable, (in case you change your mind), and purple when first applied, drying to transparent (so you can see where exactly you are putting it).

Thom's method is a type of raw edge applique, typically accomplished with heat-fusible web, such as "wonder under." The typical method, given a complex, layered design such as mine, would have resulted in a thick, stiff, multi-layer surface, which would be difficult to quilt, even with a machine. In Thom's method, there is no web, and in most places only one or two layers of fabric. Like all raw edge techniques, the raw edges must be sewn down, and the resulting quilts are not very suitable for bed quilts unless there is heavy stitching over the raw edges (for example, dense, zig-zag, machine stitching).

After gluing my original (shown above) quilt top, I assembled the quilt, using a spray glue to layer the backing, batting and top. The next step was to stitch along the "seams," the overlapping, glued edge of each piece. From there, it was up to each of us as to how to finish the quilt, perhaps with machine quilting, such as stippling or contour stitches, or perhaps with beading, all of which Thom does on his quilts.

A couple of months went by after getting to the unfinished stage shown above. I liked it, but didn't know what to do with it, until one day when I was at our Senior Center, getting foot care from a trained nurse who comes a couple times a week to help those who need it. Her treatment room, about the size of a walk-in closet, has no windows. Her client faces the door to the room, a plain, wooden door.  "That door needs a quilt," I told her. The rest is history; my scrappy improv quilt, Eclipse,  hangs there now.

Only first I had to finish it. Above is the finished quilt, Eclipse. Below I'll tell you some of the finishing steps and about how I transformed it from looking flat and ordinary to sharp and textured using embroidery embellishments. Please click on the photo so you can see the details!

You might have noticed that the finished quilt is longer (better suited for hanging on a door) than the original piece. That was a challenge, although less than you might expect, because Thom had demonstrated for us how he sometimes extends the size of his quilts. In short, I roughly planned out the addition, the mock-up shown below, then created it using the same process and scraps as the original piece.


I used fusible "tape" made for butt-joining pieces of batting, to add a new piece of batting to the bottom edge of batting on the original (upper) part of the quilt. The horizontal strip of striped fabric overlaps the two parts of the quilt and the joined batting underneath. As you can see below, I added a fussy-cut flower over the striped fabric to break up the horizontal strip and visually join the two parts.


Confession time... I'm not good at machine quilting, and don't even have a proper quilting foot for my old machine (1972 Pfaff). I tried stitching around the fussy cut flowers to secure the glued edges, but failed miserably. What to do? Ah, hand-sew with embroidery stitches and floss? Yes! It took a few tries, but eventually I found stitch and thread combinations that worked.

It looked so good that I decided to add stitching and knots to the yellow arcs next. Wow! That popped the eclipse look! In the photo below, you can see bits of all the embroidery stitches I added. Not only does the embroidery provide embellishment and emphasis, it also further quilts the piece. Click the photo to see the detail and better read the stitch identification.


Here are two more detail photos of the finished quilt (without the text boxes).



Lots of fun, and I like the results! Will I do another one? Well, right now I've finally returned to my hexie project, where I'm likely to remain for many months, but after that, scrappy improv may be just what I need!

Kenneth Strother Jr., director of operations in Princeton University's Department of Public Safety (DPS), has been named assistant vice president for public safety, effective June 1.

Charles (Charlie) Tennyson has been appointed Princeton’s new director of Transportation and Parking Services following a national search to fill the position. He previously served for five years as deputy director of the department.

Alban Forcione, an internationally renowned scholar of 17th-century literature of “Golden Age” Spain, the Walter S. Carpenter Jr., Professor of Language, Literature and Civilization of Spain, Emeritus, and Princeton alumnus, died Sept. 14 at age 82.

Gilbert Harman, the James S. McDonnell Distinguished University Professor of Philosophy, Emeritus, died at his home in Princeton on Nov. 13 after a long illness with Alzheimer’s. He was 83.

The new producing artistic director of the theater and music theater season at the arts center sat for an interview for our ‘What I think’ series.

Eric Franklin Wood, a world-renowned hydrologist who did groundbreaking work in drought prediction and served on the Princeton faculty for 43 years, died from cancer in Brooklyn, New York, on Nov. 3. He was 74.

Jacques R. Fresco, the emeritus Damon B. Pfeiffer Professor in the Life Sciences and an emeritus professor of molecular biology, died on Dec. 5. He served on Princeton's faculty for 53 years before retiring in July 2013.

The Princeton microbiologist has also created a non-infectious version of the COVID-19 virus that researchers can study safely.

Arden helped usher computers into widespread use and played a key role in establishing Princeton's Department of Computer Science.

Ronald Surtz, professor of Spanish and Portuguese languages and literatures, emeritus, died peacefully at home in Cranbury, New Jersey, on Nov. 14. He was 75.

Tanyaradzwa Tawengwa, a Princeton alumna and current Hodder Fellow who's a composer, vocalist and scholar, has come full circle since the day she sat in a McCarter audience 10 years ago and made a wish to one day be up on that stage. 

Hale Freeman Trotter, an emeritus professor of mathematics, died at 91 at his home in Princeton, New Jersey.

In honor of his parents, Chemistry Nobel Laureate David MacMillan has founded The May and Billy MacMillan Foundation to provide educational opportunities for financially disadvantaged students in Scotland.

Austin Newton, a founding member of the Department of Molecular Biology, established a new experimental system and mentored generations of undergraduates, graduate students and postdoctoral fellows. He died May 13 in Princeton at age 85.

Daniel Osherson, Princeton’s Henry R. Luce Professor in Information Technology, Consciousness, and Culture, Emeritus, known for his  creative scientific explorations with collaborators in many disciplines, died at home on Sept. 4. 

As the James Webb Space Telescope delights stargazers with breathtaking images and groundbreaking discoveries, we connected with Princeton astrophysics luminaries Gillian “Jill” Knapp and Neta Bahcall, both contributors to a new book by women astronomers.

Simon Morrison, author of the new musical biography "Mirror in the Sky,” is a professor of music and Slavic languages and literatures, and a sought-after lecturer in the humanities.

The book joins others by Princeton faculty on The New Yorker list of the year’s best. Jarrett gives a talk at Labyrinth Books on Thursday, Nov. 3.

Hisashi Kobayashi, whose steady leadership as dean guided Princeton's School of Engineering and Applied Science through a rapid expansion of programs and facilities in the late 1980s and early 1990s, died on March 9. He was 84.

Morgan's paper on plate tectonics revolutionized the field of geology in the late 1960s. He taught at Princeton from 1966 to 2004.

Thirteen Princeton University faculty members were transferred to emeritus status in recent action by the Board of Trustees.

“His mathematical legacy is enormous,” said John D’Angelo *76. “Joe was among the most friendly, popular and influential mathematicians of his generation.”

Laurie joined the Princeton faculty in 1966 and transferred to emeritus status in 2000.

Hubbard, the top-ranking information technology administrator at the Georgia Institute of Technology, will join the University in January.

Two full professors and four assistant professors have been newly appointed to the Princeton University faculty.

Lisk taught biology at Princeton for 30 years before transferring to emeritus status in 1990.

The Princeton University Board of Trustees has approved the appointment of 14 faculty members, including two full professors, two associate professors and 10 assistant professors.

The Princeton University Board of Trustees has approved the appointment of 22 faculty members, including five full professors, one associate professor and 16 assistant professors.

CSDP brings voices from across the political spectrum into conversation with Princeton social scientists and students. 

ⓒ keico has added a photo to the pool:

'roid week 2024, day 1

found old polaroids and i didn't even remember these existed.

ⓒ keico has added a photo to the pool:

in silent.

'roid week 2024, day 4

Der Ohlsen has added a photo to the pool:

Cypréa Cam + cross-processed expired Kodak Ektachrome P1600x

05/2024

tataata has added a photo to the pool:

Der Ohlsen has added a photo to the pool:

09/2024

La Sardina Belle Starr + Lomochrome Turquoise XR 100-400