Cyborg: A documentary tells the intriguing story of Neil Harbisson, who wears an antenna to “hear” colour, but it is lacking in depth and should have probed its subject more, says Simon Ings

A quantum computing protocol makes it possible to extract energy from seemingly empty space, teleport it to a new location, then store it for later use

We're trying to avert Judgment Day yet again – this time in an anime series for Netflix. But striking visuals can't make up for shortcomings in narrative and character development

Hurricane Helene hit a quartz mine in North Carolina that is key to global semiconductor production, which could impact the entire tech industry. Here is everything we know so far

Researchers have managed to encode enormous amounts of information, including images, into DNA at a rate hundreds of times faster than was previously possible

The finale doesn’t look to provide a definitive answer to what drove Aaron’s actions, much to the show’s credit.

In the 1960s and 1970s, NASA spent a lot of time thinking about whether toroidal (donut-shaped) fuel tanks were the way to go with its spacecraft. Toroidal tanks have a bunch of potential advantages over conventional spherical fuel tanks. For example, you can fit nearly 40% more volume within a toroidal tank than if you were using multiple spherical tanks within the same space. And perhaps most interestingly, you can shove stuff (like the back of an engine) through the middle of a toroidal tank, which could lead to some substantial efficiency gains if the tanks could also handle structural loads.

Because of their relatively complex shape, toroidal tanks are much more difficult to make than spherical tanks. Even though these tanks can perform better, NASA simply doesn’t have the expertise to manufacture them anymore, since each one has to be hand-built by highly skilled humans. But a company called Machina Labs thinks that they can do this with robots instead. And their vision is to completely change how we make things out of metal.

The fundamental problem that Machina Labs is trying to solve is that if you want to build parts out of metal efficiently at scale, it’s a slow process. Large metal parts need their own custom dies, which are very expensive one-offs that are about as inflexible as it’s possible to get, and then entire factories are built around these parts. It’s a huge investment, which means that it doesn’t matter if you find some new geometry or technique or material or market, because you have to justify that enormous up-front cost by making as much of the original thing as you possibly can, stifling the potential for rapid and flexible innovation.

On the other end of the spectrum you have the also very slow and expensive process of making metal parts one at a time by hand. A few hundred years ago, this was the only way of making metal parts: skilled metalworkers using hand tools for months to make things like armor and weapons. The nice thing about an expert metalworker is that they can use their skills and experience to make anything at all, which is where Machina Labs’ vision comes from, explains CEO Edward Mehr who co-founded Machina Labs after spending time at SpaceX followed by leading the 3D printing team at Relativity Space.

“Craftsmen can pick up different tools and apply them creatively to metal to do all kinds of different things. One day they can pick up a hammer and form a shield out of a sheet of metal,” says Mehr. “Next, they pick up the same hammer, and create a sword out of a metal rod. They’re very flexible.”

The technique that a human metalworker uses to shape metal is called forging, which preserves the grain flow of the metal as it’s worked. Casting, stamping, or milling metal (which are all ways of automating metal part production) are simply not as strong or as durable as parts that are forged, which can be an important differentiator for (say) things that have to go into space. But more on that in a bit.

The problem with human metalworkers is that the throughput is bad—humans are slow, and highly skilled humans in particular don’t scale well. For Mehr and Machina Labs, this is where the robots come in.

“We want to automate and scale using a platform called the ‘robotic craftsman.’ Our core enablers are robots that give us the kinematics of a human craftsman, and artificial intelligence that gives us control over the process,” Mehr says. “The concept is that we can do any process that a human craftsman can do, and actually some that humans can’t do because we can apply more force with better accuracy.”

This flexibility that robot metalworkers offer also enables the crafting of bespoke parts that would be impractical to make in any other way. These include toroidal (donut-shaped) fuel tanks that NASA has had its eye on for the last half century or so.

Machina Labs’ CEO Edward Mehr (on right) stands behind a 15 foot toroidal fuel tank.Machina Labs

“The main challenge of these tanks is that the geometry is complex,” Mehr says. “Sixty years ago, NASA was bump-forming them with very skilled craftspeople, but a lot of them aren’t around anymore.” Mehr explains that the only other way to get that geometry is with dies, but for NASA, getting a die made for a fuel tank that’s necessarily been customized for one single spacecraft would be pretty much impossible to justify. “So one of the main reasons we’re not using toroidal tanks is because it’s just hard to make them.”

Machina Labs is now making toroidal tanks for NASA. For the moment, the robots are just doing the shaping, which is the tough part. Humans then weld the pieces together. But there’s no reason why the robots couldn’t do the entire process end-to-end and even more efficiently. Currently, they’re doing it the “human” way based on existing plans from NASA. “In the future,” Mehr tells us, “we can actually form these tanks in one or two pieces. That’s the next area that we’re exploring with NASA—how can we do things differently now that we don’t need to design around human ergonomics?”

Machina Labs’ ‘robotic craftsmen’ work in pairs to shape sheet metal, with one robot on each side of the sheet. The robots align their tools slightly offset from each other with the metal between them such that as the robots move across the sheet, it bends between the tools. Machina Labs

The video above shows Machina’s robots working on a tank that’s 4.572 m (15 feet) in diameter, likely destined for the Moon. “The main application is for lunar landers,” says Mehr. “The toroidal tanks bring the center of gravity of the vehicle lower than what you would have with spherical or pill-shaped tanks.”

Training these robots to work metal like this is done primarily through physics-based simulations that Machina developed in house (existing software being too slow), followed by human-guided iterations based on the resulting real-world data. The way that metal moves under pressure can be simulated pretty well, and although there’s certainly still a sim-to-real gap (simulating how the robot’s tool adheres to the surface of the material is particularly tricky), the robots are collecting so much empirical data that Machina is making substantial progress towards full autonomy, and even finding ways to improve the process.

An example of the kind of complex metal parts that Machina’s robots are able to make.Machina Labs

Ultimately, Machina wants to use robots to produce all kinds of metal parts. On the commercial side, they’re exploring things like car body panels, offering the option to change how your car looks in geometry rather than just color. The requirement for a couple of beefy robots to make this work means that roboforming is unlikely to become as pervasive as 3D printing, but the broader concept is the same: making physical objects a software problem rather than a hardware problem to enable customization at scale.

Thirteen years since a massive earthquake and tsunami struck the Fukushima Dai-ichi nuclear power plant in northern Japan, causing a loss of power, meltdowns and a major release of radioactive material, operator Tokyo Electric Power Co. (TEPCO) finally seems to be close to extracting the first bit of melted fuel from the complex—thanks to a special telescopic robotic device.

Despite Japan’s prowess in industrial robotics, TEPCO had no robots to deploy in the immediate aftermath of the disaster. Since then, however, robots have been used to measure radiation levels, clear building debris, and survey the exterior and interior of the plant overlooking the Pacific Ocean.

It will take decades to decommission Fukushima Dai-ichi, and one of the most dangerous, complex tasks is the removal and storage of about 880 tons of highly radioactive molten fuel in three reactor buildings that were operating when the tsunami hit. TEPCO believes mixtures of uranium, zirconium and other metals accumulated around the bottom of the primary containment vessels (PCVs) of the reactors—but the exact composition of the material is unknown. The material is “fuel debris,” which TEPCO defines as overheated fuel that has melted with fuel rods and in-vessel structures, then cooled and re-solidified. The extraction was supposed to begin in 2021 but ran into development delays and obstacles in the extraction route; the coronavirus pandemic also slowed work.

While TEPCO wants a molten fuel sample to analyze for exact composition, getting just a teaspoon of the stuff has proven so tricky that the job is years behind schedule. That may change soon as crews have deployed the telescoping device to target the 237 tons of fuel debris in Unit 2, which suffered less damage than the other reactor buildings and no hydrogen explosion, making it an easier and safer test bed.

“We plan to retrieve a small amount of fuel debris from Unit 2, analyze it to evaluate its properties and the process of its formation, and then move on to large-scale retrieval,” says Tatsuya Matoba, a spokesperson for TEPCO. “We believe that extracting as much information as possible from the retrieved fuel debris will likely contribute greatly to future decommissioning work.”

How TEPCO Plans to Retrieve a Fuel Sample

Getting to the fuel is easier said than done. Shaped like an inverted light bulb, the damaged PCV is a 33-meter-tall steel structure that houses the reactor pressure vessel where nuclear fission took place. A 2-meter-long isolation valve designed to block the release of radioactive material sits at the bottom of the PCV, and that’s where the robot will go in. The fuel debris itself is partly underwater.

The robot arm is being preceded by a smaller telescopic device. The telescopic device, which is trying to retrieve 3 grams of the fuel debris without further contamination to the outside environment, is similar to the larger robot arm, which is better suited for the retrieval of larger bits of debris.

Mitsubishi Heavy Industries, the International Research Institute for Nuclear Decommissioning and UK-based Veolia Nuclear Solutions developed the robot arm to enter small openings in the PCV, where it can survey the interior and grab the fuel. Mostly made of stainless steel and aluminum, the arm measures 22 meters long, weighs 4.6 tons and can move along 18 degrees of freedom. It’s a boom-style arm, not unlike the robotic arms on the International Space Station, that rests in a sealed enclosure box when not extended.

The arm consists of four main elements: a carriage that pushes the assembly through the openings, arm links that can fold up like a ream of dot matrix printer paper, an arm that has three telescopic stages, and a “wand” (an extendable pipe-shaped component) with cameras and a gripper on its tip. Both the arm and the wand can tilt downward toward the target area.

After the assembly is pushed through the PCV’s isolation valve, it angles downward over a 7.2-meter-long rail heading toward the base of the reactor. It continues through existing openings in the pedestal, a concrete structure supporting the reactor, and the platform, which is a flat surface under the reactor.

Then, the tip is lowered on a cable like the grabber in a claw machine toward the debris field at the bottom of the pedestal. The gripper tool at the end of the component has two delicate pincers (only 5 square millimeters), that can pinch a small pebble of debris. The debris is transferred to a container and, if all goes well, is brought back up through the openings and placed in a glovebox: A sealed, negative-pressure container in the reactor building where initial testing can be performed. It will then be moved to a Japan Atomic Energy Agency facility in nearby Ibaraki Prefecture for detailed analysis.

While the gripper on the telescopic device currently being used was able to reach the debris field and grasp a piece of rubble—it’s unknown if it was actually melted fuel—last month, two of the four cameras on the device stopped working a few days later, and the device was eventually reeled back into the enclosure box. Crews confirmed there were no problems with signal wiring from the control panel in the reactor building, and proceeded to perform oscilloscope testing. TEPCO speculates that radiation passing through camera semiconductor elements caused electrical charge to build up, and that the charge will drain if the cameras are left on in a relatively low-dose environment. It was the latest setback in a very long project.

“Retrieving fuel debris from Fukushima Daiichi Nuclear Power Station is an extremely difficult task, and a very important part of decommissioning,” says Matoba. “With the goal of completing the decommissioning in 30 to 40 years, we believe it is important to proceed strategically and systematically with each step of the work at hand.”

This story was updated on 15 October, 2024 to clarify that TEPCO is using two separate tools (a smaller telescopic device and a larger robot arm) in the process of retrieving fuel debris samples.

Marina Umaschi Bers has long been at the forefront of technological innovation for kids. In the 2010s, while teaching at Tufts University, in Massachusetts, she codeveloped the ScratchJr programming language and KIBO robotics kits, both intended for young children in STEM programs. Now head of the DevTech research group at Boston College, she continues to design learning technologies that promote computational thinking and cultivate a culture of engineering in kids.

What was the inspiration behind creating ScratchJr and the KIBO robot kits?

Marina Umaschi Bers: We want little kids—as they learn how to read and write, which are traditional literacies—to learn new literacies, such as how to code. To make that happen, we need to create child-friendly interfaces that are developmentally appropriate for their age, so they learn how to express themselves through computer programming.

How has the process of invention changed since you developed these technologies?

Bers: Now, with the maker culture, it’s a lot cheaper and easier to prototype things. And there’s more understanding that kids can be our partners as researchers and user-testers. They are not passive entities but active in expressing their needs and helping develop inventions that fit their goals.

What should people creating new technologies for kids keep in mind?

Bers: Not all kids are the same. You really need to look at the age of the kids. Try to understand developmentally where these children are in terms of their cognitive, social, emotional development. So when you’re designing, you’re designing not just for a user, but you’re designing for a whole human being.

The other thing is that in order to learn, children need to have fun. But they have fun by really being pushed to explore and create and make new things that are personally meaningful. So you need open-ended environments that allow children to explore and express themselves.

The KIBO kits teach kids robotics coding in a playful and screen-free way. KinderLab Robotics

How can coding and learning about robots bring out the inner inventors in kids?

Bers: I use the words “coding playground.” In a playground, children are inventing games all the time. They are inventing situations, they’re doing pretend play, they’re making things. So if we’re thinking of that as a metaphor when children are coding, it’s a platform for them to create, to make characters, to create stories, to make anything they want. In this idea of the coding playground, creativity is welcome—not just “follow what the teacher says” but let children invent their own projects.

What do you hope for in terms of the next generation of technologies for kids?

Bers: I hope we would see a lot more technologies that are outside. Right now, one of our projects is called Smart Playground [a project that will incorporate motors, sensors, and other devices into playgrounds to bolster computational thinking through play]. Children are able to use their bodies and run around and interact with others. It’s kind of getting away from the one-on-one relationship with the screen. Instead, technology is really going to augment the possibilities of people to interact with other people, and use their whole bodies, much of their brains, and their hands. These technologies will allow children to explore a little bit more of what it means to be human and what’s unique about us.

This article appears in the November 2024 print issue as “The Kids’ Inventor.”

Unknown host Charlie Stone analyzes Trump's unprecedented victory with Obama Homeland Security Secretary, Jeh Johnson

As we share our truths and witness each other's, we build unity and community.

Hours after Donald Trump wins the most conclusive mandate in 40 years, Mitch McConnell engineers a coup against his agenda by calling early leadership elections in the senate.

Comet Nishimura (C/2023 P1) was discovered in August and is now whizzing by Earth, but finding it in the sky will be a challenge.

Online group Girls Who Chase has created a global community of women who head into severe weather to record images, report damage and help scientists understand the impact of storms to be better prepared

A judge recused himself Tuesday from presiding over Arizona's fake electors case after an email surfaced in which he told fellow judges to speak out against attacks on Democratic Vice President Kamala Harris' campaign for the presidency.

The Adison Vein Locator gives medical professionals Superman-like X-ray vision for finding patients' veins for easy insertion of needles.

By Tom Garry, in Salford

The company behind Pornhub and other popular pornographic sites broke Canadian privacy law by allowing intimate images to be shared on its websites without the direct knowledge or consent of everyone depicted, the federal privacy commissioner has ruled. The Office of the Privacy Commissioner’s (OPC) investigation into Aylo (formerly MindGeek), one of the world’s largest […]

A coronal mass ejection could strike the Earth's magnetosphere this week and cause a geomagnetic storm due to conditions caused by the autumnal equinox.

A spike in earthquakes at Mount Adams, a volcano in Washington state, prompted scientists to install additional monitoring instruments to assess the seismic activity.

The sun blasted a coronal mass at Earth earlier this week, and after back-to-back major hurricanes, some are concerned it could impact the power grid.

SpaceX pulled off a stunning achievement this week, conducting four launches in less than 48 hours with huge implications for the future of space exploration.

And the Epic Games Achievements system will start to roll out next week.

A new genus and species of early-diverging oviraptorosaurian dinosaur has been identified from two specimens found in Inner Mongolia, China.

The post New Oviraptorosaur Species Discovered in China appeared first on Sci.News: Breaking Science News.

Flu and other respiratory viruses seem to barely exist outside of winter, but covid-19 cases have consistently risen every summer over the past few years

A band that measures the acidity of sweat could flag if athletes or manual workers are overexerting themselves

John Ratcliffe, who previously served as President-elect Trump's principal intelligence advisor, has now been picked by Trump to serve as director of the CIA.

Senator-elect Jim Justice's office has clarified reports that his famous pooch Babydog was banned from the Senate floor, saying Justice never intended to bring the dog onto the floor.

“Cover, bring to a boil, then reduce heat. Simmer for 20 minutes.” These directions seem simple enough, and yet I have messed up many, many pots of rice over the years. My sympathies to anyone who’s ever had to boil rice on a stovetop, cook it in a clay pot over a kerosene or charcoal burner, or prepare it in a cast-iron cauldron. All hail the 1955 invention of the automatic rice cooker!

How the automatic rice cooker was invented

It isn’t often that housewives get credit in the annals of invention, but in the story of the automatic rice cooker, a woman takes center stage. That happened only after the first attempts at electrifying rice cooking, starting in the 1920s, turned out to be utter failures. Matsushita, Mitsubishi, and Sony all experimented with variations of placing electric heating coils inside wooden tubs or aluminum pots, but none of these cookers automatically switched off when the rice was done. The human cook—almost always a wife or daughter—still had to pay attention to avoid burning the rice. These electric rice cookers didn’t save any real time or effort, and they sold poorly.

But Shogo Yamada, the energetic development manager of the electric appliance division for Toshiba, became convinced that his company could do better. In post–World War II Japan, he was demonstrating and selling electric washing machines all over the country. When he took a break from his sales pitch and actually talked to women about their daily household labors, he discovered that cooking rice—not laundry—was their most challenging chore. Rice was a mainstay of the Japanese diet, and women had to prepare it up to three times a day. It took hours of work, starting with getting up by 5:00 am to fan the flames of a kamado, a traditional earthenware stove fueled by charcoal or wood on which the rice pot was heated. The inability to properly mind the flame could earn a woman the label of “failed housewife.”

In 1951, Yamada became the cheerleader of the rice cooker within Toshiba, which was understandably skittish given the past failures of other companies. To develop the product, he turned to Yoshitada Minami, the manager of a small family factory that produced electric water heaters for Toshiba. The water-heater business wasn’t great, and the factory was on the brink of bankruptcy.

How Sources Influence the Telling of History

As someone who does a lot of research online, I often come across websites that tell very interesting histories, but without any citations. It takes only a little bit of digging before I find entire passages copied and pasted from one site to another, and so I spend a tremendous amount of time trying to track down the original source. Accounts of popular consumer products, such as the rice cooker, are particularly prone to this problem. That’s not to say that popular accounts are necessarily wrong; plus they are often much more engaging than boring academic pieces. This is just me offering a note of caution because every story offers a different perspective depending on its sources.

For example, many popular blogs sing the praises of Fumiko Minami and her tireless contributions to the development of the rice maker. But in my research, I found no mention of Minami before Helen Macnaughtan’s 2012 book chapter, “Building up Steam as Consumers: Women, Rice Cookers and the Consumption of Everyday Household Goods in Japan,” which itself was based on episode 42 of the Project X: Challengers documentary series that was produced by NHK and aired in 2002.

If instead I had relied solely on the description of the rice cooker’s early development provided by the Toshiba Science Museum (here’s an archived page from 2007), this month’s column would have offered a detailed technical description of how uncooked rice has a crystalline structure, but as it cooks, it becomes a gelatinized starch. The museum’s website notes that few engineers had ever considered the nature of cooking rice before the rice-cooker project, and it refers simply to the “project team” that discovered the process. There’s no mention of Fumiko.

Both stories are factually correct, but they emphasize different details. Sometimes it’s worth asking who is part of the “project team” because the answer might surprise you. —A.M.

Although Minami understood the basic technical principles for an electric rice cooker, he didn’t know or appreciate the finer details of preparing perfect rice. And so Minami turned to his wife, Fumiko.

Fumiko, the mother of six children, spent five years researching and testing to document the ideal recipe. She continued to make rice three times a day, carefully measuring water-to-rice ratios, noting temperatures and timings, and prototyping rice-cooker designs. Conventional wisdom was that the heat source needed to be adjusted continuously to guarantee fluffy rice, but Fumiko found that heating the water and rice to a boil and then cooking for exactly 20 minutes produced consistently good results.

But how would an automatic rice cooker know when the 20 minutes was up? A suggestion came from Toshiba engineers. A working model based on a double boiler (a pot within a pot for indirect heating) used evaporation to mark time. While the rice cooked in the inset pot, a bimetallic switch measured the temperature in the external pot. Boiling water would hold at a constant 100 °C, but once it had evaporated, the temperature would soar. When the internal temperature of the double boiler surpassed 100 °C, the switch would bend and cut the circuit. One cup of boiling water in the external pot took 20 minutes to evaporate. The same basic principle is still used in modern cookers.

Yamada wanted to ensure that the rice cooker worked in all climates, so Fumiko tested various prototypes in extreme conditions: on her rooftop in cold winters and scorching summers and near steamy bathrooms to mimic high humidity. When Fumiko became ill from testing outside, her children pitched in to help. None of the aluminum and glass prototypes, it turned out, could maintain their internal temperature in cold weather. The final design drew inspiration from the Hokkaidō region, Japan’s northernmost prefecture. Yamada had seen insulated cooking pots there, so the Minami family tried covering the rice cooker with a triple-layered iron exterior. It worked.

How Toshiba sold its automatic rice cooker

Toshiba’s automatic rice cooker went on sale on 10 December 1955, but initially, sales were slow. It didn’t help that the rice cooker was priced at 3,200 yen, about a third of the average Japanese monthly salary. It took some salesmanship to convince women they needed the new appliance. This was Yamada’s time to shine. He demonstrated using the rice cooker to prepare takikomi gohan, a rice dish seasoned with dashi, soy sauce, and a selection of meats and vegetables. When the dish was cooked in a traditional kamado, the soy sauce often burned, making the rather simple dish difficult to master. Women who saw Yamada’s demo were impressed with the ease offered by the rice cooker.

Another clever sales technique was to get electricity companies to serve as Toshiba distributors. At the time, Japan was facing a national power surplus stemming from the widespread replacement of carbon-filament lightbulbs with more efficient tungsten ones. The energy savings were so remarkable that operations at half of the country’s power plants had to be curtailed. But with utilities distributing Toshiba rice cookers, increased demand for electricity was baked in.

Within a year, Toshiba was selling more than 200,000 rice cookers a month. Many of them came from the Minamis’ factory, which was rescued from near-bankruptcy in the process.

How the automatic rice cooker conquered the world

From there, the story becomes an international one with complex localization issues. Japanese sushi rice is not the same as Thai sticky rice which is not the same as Persian tahdig, Indian basmati, Italian risotto, or Spanish paella. You see where I’m going with this. Every culture that has a unique rice dish almost always uses its own regional rice with its own preparation preferences. And so countries wanted their own type of automatic electric rice cooker (although some rejected automation in favor of traditional cooking methods).

Yoshiko Nakano, a professor at the University of Hong Kong, wrote a book in 2009 about the localized/globalized nature of rice cookers. Where There Are Asians, There Are Rice Cookers traces the popularization of the rice cooker from Japan to China and then the world by way of Hong Kong. One of the key differences between the Japanese and Chinese rice cooker is that the latter has a glass lid, which Chinese cooks demanded so they could see when to add sausage. More innovation and diversification followed. Modern rice cookers have settings to give Iranians crispy rice at the bottom of the pot, one to let Thai customers cook noodles, one for perfect rice porridge, and one for steel-cut oats.

My friend Hyungsub Choi, in his 2022 article “Before Localization: The Story of the Electric Rice Cooker in South Korea,” pushes back a bit on Nakano’s argument that countries were insistent on tailoring cookers to their tastes. From 1965, when the first domestic rice cooker appeared in South Korea, to the early 1990s, Korean manufacturers engaged in “conscious copying,” Choi argues. That is, they didn’t bother with either innovation or adaptation. As a result, most Koreans had to put up with inferior domestic models. Even after the Korean government made it a national goal to build a better rice cooker, manufacturers failed to deliver one, perhaps because none of the engineers involved knew how to cook rice. It’s a good reminder that the history of technology is not always the story of innovation and progress.

Eventually, the Asian diaspora brought the rice cooker to all parts of the globe, including South Carolina, where I now live and which coincidentally has a long history of rice cultivation. I bought my first rice cooker on a whim, but not for its rice-cooking ability. I was intrigued by the yogurt-making function. Similar to rice, yogurt requires a constant temperature over a specific length of time. Although successful, my yogurt experiment was fleeting—store-bought was just too convenient. But the rice cooking blew my mind. Perfect rice. Every. Single. Time. I am never going back to overflowing pots of starchy water.

Part of a continuing series looking at historical artifacts that embrace the boundless potential of technology.

An abridged version of this article appears in the November 2024 print issue as “The Automatic Rice Cooker’s Unlikely Inventor.”

References

Helen Macnaughtan’s 2012 book chapter, “Building up Steam as Consumers: Women, Rice Cookers and the Consumption of Everyday Household Goods in Japan,” was a great resource in understanding the development of the Toshiba ER-4. The chapter appeared in The Historical Consumer: Consumption and Everyday Life in Japan, 1850-2000, edited by Penelope Francks and Janet Hunter (Palgrave Macmillan).

Yoshiko Nakano’s book Where There are Asians, There are Rice Cookers (Hong Kong University Press, 2009) takes the story much further with her focus on the National (Panasonic) rice cooker and its adaptation and adoption around the world.

The Toshiba Science Museum, in Kawasaki, Japan, where we sourced our main image of the original ER-4, closed to the public in June. I do not know what the future holds for its collections, but luckily some of its Web pages have been archived to continue to help researchers like me.

This is a sponsored article brought to you by BESydney.

In July 2024, Sydney woman Katherine Bennell-Pegg made history as the first astronaut to graduate under the Australian flag and the first female astronaut in Australia. Her journey, marked by determination and discipline, showcases Australia’s growing prominence in space exploration and research.

From her academic achievements at the University of Sydney (USYD) to her rigorous training at the European Space Agency (ESA), Bennell-Pegg’s success has paved a path forward for aspiring space and aerospace professionals in Australia and globally.

A journey to the stars begins in Sydney

Katherine Bennell-Pegg was born in Sydney, New South Wales, and grew up in the Northern Beaches area. Her fascination with space began at an early age.

“I always dreamed of being an astronaut,” Bennell-Pegg shared in her “Insights from an Australian Astronaut” Space Forum Speech in July 2024. “When I was young, it was for the adventure, but after more than a decade working in space, it’s now because I know the role it plays in tackling real-world problems and developing new knowledge that can benefit our society, environment and science.”

Sydney: A Hub for Space Innovation

Sydney, the vibrant heart of the state of New South Wales (NSW), stands at the forefront of aerospace innovation in Australia. With its world-class research facilities, leading academic institutions and strategic geographic positioning, Sydney is not only Australia’s gateway to the Indo-Pacific but also a burgeoning hub for international aerospace endeavours.

NSW is home to more than 40 per cent of Australia’s aerospace industry. Substantial investments from both the state and federal governments support this concentration of capabilities, underpinning Sydney’s role as a leader in aerospace. From advanced manufacturing and cybersecurity to quantum technologies and space exploration, this progressive city is truly thriving.

Sydney’s appeal as a desirable location for hosting aerospace conferences and business events is bolstered by its comprehensive infrastructure, vibrant startup community and strategic position as a transport hub.

Sydney’s track record of successfully hosting events highlights the city’s ability to organise impactful international gatherings, including:

• Australian Space Summit
• New Horizons Summit
• CubeSatPlus2024 - NEW SPACE: Unbounded Skies

Sydney will also host the 76th International Astronautical Congress from 29 September to 3 October 2025 and the 34th Congress of the International Council for the Aeronautical Sciences (ICAS) to be held 13 to 17 September 2026. Both will take place at ICC Sydney, further solidifying Sydney’s status as a central hub for aerospace events.

Would you like to know more about Sydney’s credentials in Aerospace? Download our Aerospace eBook or visit besydney.com.au

Sydney proved to be the ideal location for Bennell-Pegg’s journey to begin. She studied at the University of Sydney, where she earned a Bachelor of Engineering (Honors) in Aeronautical Engineering (Space) and a Bachelor of Science (Advanced) in Physics.

Sydney’s universities are at the forefront of aerospace education and research. Institutions such as the University of Sydney (USYD), the University of New South Wales (UNSW Sydney) and the University of Technology Sydney (UTS) attract students from around the world. UNSW Sydney, with its School of Aerospace, Mechanical, and Mechatronic Engineering, is renowned for its innovative research in space technology and satellite systems, while UTS provides cutting-edge programs in aerospace engineering and physics, emphasizing practical applications and industry partnerships. USYD excels in aeronautical engineering and space science, supported by advanced facilities and strong ties to major aerospace organisations. Together, these universities offer comprehensive programs that integrate theoretical knowledge with hands-on experience, preparing students for dynamic careers in the rapidly evolving aerospace and space sectors.

Having excelled in her studies at USYD, Bennell-Pegg was awarded the Charles Kuller Graduation Prize for her top-placed undergraduate thesis. Subsequently, her quest for knowledge took her to Europe, where she earned two Master of Science degrees: one in Astronautics and Space Engineering from Cranfield University and another in Space Technology from Luleå University of Technology.

Reflecting on her educational path, Bennell-Pegg stated, “With the encouragement of my parents, I researched what it would take to become an astronaut and worked hard at school, participating in everything from aerobatic flying lessons to amateur astronomy.”

Inside the rigorous training regimen of an astronaut

Bennell-Pegg’s professional career began with roles at Airbus UK, where she contributed to numerous space missions and concept studies, such as Martian in-situ resource utilisation and space debris removal. Her expertise led her to the Australian Space Agency, where she became the Director of Space Technology.

In 2021, Bennell-Pegg was invited by the European Space Agency (ESA) to undertake Basic Astronaut Training at the European Astronaut Centre in Germany. When the ESA application opened in 2021, it was the first opening in 15 years. Bennell-Pegg jumped at the opportunity to apply alongside over 22,000 others from 22 countries. She endured six knock-out rounds, including medical, psychometrics, psychology and technical tests and made it to the group of 25 who passed.

This historic invitation marked the first time an international astronaut candidate was offered training by the ESA.

“The training was demanding, but it was also an incredible opportunity to learn from some of the best minds in the field and to be part of a team that is pushing the boundaries of human exploration.”—Katherine Bennell-Pegg

Bennell-Pegg’s training regimen was intense, encompassing physical conditioning, complex simulations, and theoretical classes designed to prepare candidates for long-duration missions to the International Space Station (ISS) and beyond. This included:

• Studies in biology, astronomy, earth sciences, meteorology, materials, medical and fluids, both in theory and in labs.
• Radiation research – an area of expertise for Australia. This will increase as humans travel back to the Moon.
• Medical operations: Astronauts need to be able to perform medical procedures on themselves and others.
• Training for expeditions: This included honing team dynamics through behavioral training, ocean and winter survival training, rescue and firefighting.

Sharing her thoughts on this transformative experience, Bennell-Pegg said, “The training was demanding, but it was also an incredible opportunity to learn from some of the best minds in the field and to be part of a team that is pushing the boundaries of human exploration.”

In April 2024, Bennell-Pegg completed her training, graduating with her ESA classmates from “The Hoppers” group. Upon graduation, she became fully qualified for assignments on long-duration missions to the ISS, making her the first Australian female astronaut and the first person to train as an astronaut under the Australian flag.

“I want to use this experience to open doors for Australian scientists and engineers to utilize space for their discoveries,” Bennell-Pegg said. “I hope to inspire the pursuit of STEM careers and show all Australians that they too can reach for the stars.”

Elevating Australia’s role in space exploration

Katherine Bennell-Pegg’s achievements represent a significant milestone. Her journey from the University of Sydney to the rigorous training programs at the European Astronaut Centre showcases the potential of Australian talent in the global space community.

“Being the first astronaut trained under the Australian flag is an incredible honor,” Bennell-Pegg said. “I’m grateful for the support that has fueled me through intense training and opened doors for more Australians in space exploration. Whether I fly or not, there is much to accomplish here on Earth. I’m excited to leverage this experience to inspire future generations in STEM and elevate Australia’s presence in the global space community. Becoming an astronaut is just the beginning.”

Bennell-Pegg’s dream to become an Australian astronaut is more than just a personal triumph; it is a win for anyone who aspires to a career in space or aerospace. Sydney, with its world-class educational institutions, advanced manufacturing facilities scheduled for the Western Sydney Aerotropolis and expanding opportunities in aerospace and defence, is an ideal starting point for anyone looking to make their mark in these sectors.

Would you like to know more about Sydney’s credentials in Aerospace? Download our Aerospace eBook or visit besydney.com.au

The IEEE Board of Directors shapes the future direction of IEEE and is committed to ensuring IEEE remains a strong and vibrant organization—serving the needs of its members and the engineering and technology community worldwide—while fulfilling the IEEE mission of advancing technology for the benefit of humanity.

This article features IEEE Board of Directors members ChunChe “Lance” Fung, Eric Grigorian, and Christina Schober.

IEEE Senior Member ChunChe “Lance” Fung

Director, Region 10: Asia Pacific

Joanna Mai Yie Leung

Fung has worked in academia and provided industry consultancy services for more than 40 years. His research interests include applying artificial intelligence, machine learning, computational intelligence, and other techniques to solve practical problems. He has authored more than 400 publications in the disciplines of AI, computational intelligence, and related applications. Fung currently works on the ethical applications and social impacts of AI.

A member of the IEEE Systems, Man, and Cybernetics Society, Fung has been an active IEEE volunteer for more than 30 years. As a member and chair of the IEEE Technical Program Integrity and Conference Quality committees, he oversaw the quality of technical programs presented at IEEE conferences. Fung also chaired the Region 10 Educational Activities Committee. He was instrumental in translating educational materials to local languages for the IEEE Reaching Locals project.

As chair of the IEEE New Initiatives Committee, he established and promoted the US $1 Million Challenge Call for New Initiatives, which supports potential IEEE programs, services, or products that will significantly benefit members, the public, the technical community, or customers and could have a lasting impact on IEEE or its business processes.

Fung has left an indelible mark as a dedicated educator at Singapore Polytechnic, Curtin University, and Murdoch University. He was appointed in 2015 as professor emeritus at Murdoch, and he takes pride in training the next generation of volunteers, leaders, teachers, and researchers in the Western Australian community. Fung received the IEEE Third Millennium Medal and the IEEE Region 10 Outstanding Volunteer Award.

IEEE Senior Member Eric Grigorian

Director, Region 3: Southern U.S. & Jamaica

Sean McNeil/GTRI

Grigorian has extensive experience leading international cross-domain teams that support the commercial and defense industries. His current research focuses on implementing model-based systems engineering, creating models that depict system behavior, interfaces, and architecture. His work has led to streamlined processes, reduced costs, and faster design and implementation of capabilities due to efficient modeling and verification. Grigorian holds two U.S. utility patents.

Grigorian has been an active volunteer with IEEE since his time as a student member at the University of Alabama in Huntsville (UAH). He saw it as an excellent way to network and get to know people. He found his personality was suited for working within the organization and building leadership skills. During the past 43 years as an IEEE member, he has been affiliated with the IEEE Aerospace and Electronic Systems (AESS), IEEE Computer, and IEEE Communications societies.

As Grigorian’s career has evolved, his involvement with IEEE has also increased. He has been the IEEE Huntsville Section student activities chair, as well as vice chair, and chair. He also was the section’s AESS chair. He served as IEEE SoutheastCon chair in 2008 and 2019, and served on the IEEE Region 3 executive committee as area chair and conference committee chair, enhancing IEEE members’ benefits, engagement, and career advancement. He has significantly contributed to initiatives within IEEE, including promoting preuniversity science, technology, engineering, and mathematics efforts in Alabama.

Grigorian’s professional achievements have been recognized with numerous awards from employers and local technical chapters, including with the 2020 UAH Alumni of Achievement Award for the College of Engineering and the 2006 IEEE Region 3 Outstanding Engineer of the Year Award. He is a member of the IEEE–Eta Kappa Nu honor society.

IEEE Life Senior Member Christina Schober

Director, Division V

Katie Fears/Brio Art

Schober is an innovative engineer with a diverse design and manufacturing engineering background. With more than 40 years of experience, her career has spanned research, design, and manufacturing sensors for space, commercial, and military aircraft navigation and tactical guidance systems. She was responsible for the successful transition from design to production for groundbreaking programs including an integrated flight management system, the Stinger missile’s roll frequency sensor, and the designing of three phases of the DARPA atomic clock. She holds 17 U.S. patents and 24 other patents in the aerospace and navigation fields.

Schober started her career in the 1980s, at a time when female engineers were not widely accepted. The prevailing attitude required her to “stay tough,” she says, and she credits IEEE for giving her technical and professional support. Because of her experiences, she became dedicated to making diversity and inclusion systemic in IEEE.

Schober has held many leadership roles, including IEEE Division VIII Director, IEEE Sensors Council president, and IEEE Standards Sensors Council secretary. In addition to her membership in the IEEE Photonics Society, she is active with the IEEE Computer Society, IEEE Sensors Council, IEEE Standards Association, and IEEE Women in Engineering.

She is also active in her local community, serving as an invited speaker on STEM for the public school system and was a volunteer at youth shelters. Schober has received numerous awards including the IEEE Sensors Council Lifetime Contribution Award and the IEEE Twin Cities Section’s Young Engineer of the Year Award. She is an IEEE Computer Society Gold Core member, a member of the IEEE–Eta Kappa Nu honor society and received the IEEE Third Millennium Medal.

Will Apple keep one of the few single-fee alternatives to Photoshop available?

Humans perfected how to identify wild animals over millennia, and now biologists are rediscovering the exceptional worth of the tracks and marks left behind

Harris has made history multiple times over.

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

The former president thinks Joe Biden 'nailed this decision.'

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

The huge four-storey walls of the Lightroom in London are showing ‘Vogue: Inventing the Runway'.

Solar storms have the ability to harm astronauts and force massive blackouts

New NatGeo documentary was directed by the same duo who brought us the Oscar-winning Free Solo.

Woman claims to have a degree from "Havard" and be licensed by the "Estate Board."

Trump plans to repeal Biden's 2023 order and levy tariffs on GPU imports.

On Tuesday’s broadcast of MSNBC’s “Morning Joe,” Rep. Ritchie Torres (D-NY) stated that “the Biden administration demonstrated incompetence in managing the migrant crisis,” President Joe Biden “had the unilateral ability to issue an executive order restricting migration at the border, and he waited two-and-a-half years,” because the order “was unpopular among far-left elites who have outsized power over the policymaking and messaging of the Democratic Party.” Torres said, “[O]n the subject of immigration, there was genuine political malpractice. Since 2022, there has been an unprecedented wave of migration, whose impact was felt, not only at the border, but in cities like New York, where the shelter system and our municipal finances were completely overwhelmed. … Despite clear signs of popular discontent, it took the Biden administration two-and-a-half years to issue an executive order restricting migration at the border, and by then it was too late. The Republicans had won the issue, had weaponized it against us. And when the President issued the executive order, polling revealed that it was popular among the American people, among people from every racial category, blacks and whites, Latinos and Asians. So, if it was effective at reducing migration at the border and if it was

The post Dem Rep. Torres: Biden Showed ‘Incompetence’ on Immigration Because He Catered to ‘Far-Left Elites’ appeared first on Breitbart.

The California-based Middlebury Institute of International Studies published research this week that showed China has constructed a prototype nuclear reactor that could fit aboard a large surface vessel - a sign that China is making progress toward building a nuclear-powered aircraft carrier.

The post Report: China Builds ‘Prototype’ Nuclear Reactor for Aircraft Carrier appeared first on Breitbart.

On “The Alex Marlow Show” on Tuesday, Breitbart Editor-in-Chief and host Alex Marlow mocked Ivy League schools like Yale for degrading themselves with things like Yale’s Beyoncé course. Marlow said, “Yale University’s going to offer a Beyoncé makes history course in 2025. So, that’s what they’re doing. We’re just kicking butt and taking names and then they’re — they’ve got a new Beyoncé course over at Yale. Do the Ivy Leagues know that they degrade themselves and debase themselves? I love it. Because, as people have been pointing out, there’s no surer sign of people moving to the left than…when they go to college. That’s where it’s at. That is the fountain of leftism in our society…the universities. … And, not to mention, they infect our cities.” “The Alex Marlow Show,” hosted by Breitbart Editor-in-Chief Alex Marlow, is a weekday podcast produced by Breitbart News and Salem Podcast Network. You can subscribe to the podcast on YouTube, Rumble, Apple Podcasts, and Spotify. Follow Breitbart.tv on Twitter @BreitbartVideo

The post Alex Marlow: Yale Embarrasses Itself with Woke ‘Beyonce Makes History’ Course appeared first on Breitbart.