After a comprehensive two-year follow-up, researchers at the UCLA Health Jonsson Comprehensive Cancer Center found that MRI-guided stereotactic body radiotherapy (SBRT) for prostate cancer significantly reduced long-term side effects and improved quality of life, particularly in bowel and sexual health, compared to conventional CT-guided treatment.

Research in 60 Seconds: A Tiny Technology to Neutralize Radiation  UCF

This EMF Radiation Blocking Hoodie from Bon Charge looks like it’s just the ticket for these warm winter nights. And when we say warm, you know we’re not just referring to the temperature, right? According to some very sensible people, over exposure to high levels of electromagnetic radiation can be a very not good thing. Now before we all head off and find a deep bunker somewhere, it’s not just the levels, but also the type of radiation that matters....

The post EMF Radiation Blocking Hoodie Keeps You Safe. Maybe. appeared first on The Red Ferret Journal.

The RadMan 2 device provides instantaneous and reliable indication of the impermissibly high levels of exposure to electromagnetic radiation. The shaped frequency response of the personal monitor ensures the correct alarm threshold is automatically set for the entire frequency range. The device includes sensors for the E field (electric) and H field (magnetic), and the higher value of either will trigger an alarm and be displayed as a percentage of the applicable upper limit. The unit has three alarm indicators, ultrabright flashing LED and loud audible. It also vibrates.

Silver Spring, MD – The Center for Construction Research and Training (also known as CPWR), together with the Roofing r2p Partnership and the RF Radiation Work Group, have developed the Radiofrequency (RF) Radiation Awareness Program for the Construction Industry, intended to inform employers and labor organizations about the risks of radiofrequency radiation.

London — A group of physicians is calling on health care employers to provide female workers who are exposed to on-the-job radiation with added protections to minimize their risk of breast cancer.

Silver Spring, MD — A new hazard alert from CPWR – The Center for Construction Research and Training highlights ways to recognize and control hazards associated with radiofrequency radiation exposure.

Washington — OSHA has created a webpage intended to educate workers about how to protect themselves in radiation-related situations ranging from a small, isolated spill in a laboratory to a potentially catastrophic release at a nuclear facility.

For most workers, radiofrequency radiation – an invisible type of non-ionizing radiation used to transmit wireless information – isn’t something to be overly concerned about. Low levels of RF radiation aren’t considered hazardous, according to the Center for Construction Research and Training (also known as CPWR).

(Time-resolved) macromolecular crystallography at the new ESRF-ID29 beamline is described.

This article reports an investigation into the effects of specific radiation damage to halogenated ligands in crystal structures of protein-inhibitor complexes.

In this work, Ce-doped yttria-stabilized zirconia (YSZ) and pure YSZ phases were subjected to irradiation with 14 MeV Au ions. Irradiation studies were performed to simulate long-term structural and microstructural damage due to self-irradiation in YSZ phases hosting alpha-active radioactive species. It was found that both the Ce-doped YSZ and the YSZ phases had a reasonable tolerance to irradiation at high ion fluences and the bulk crystallinity was well preserved. Nevertheless, local microstrain increased in all compounds under study after irradiation, with the Ce-doped phases being less affected than pure YSZ. Doping with cerium ions increased the microstructural stability of YSZ phases through a possible reduction in the mobility of oxygen atoms, which limits the formation of structural defects. Doping of YSZ with tetravalent actinide elements is expected to have a similar effect. Thus, YSZ phases are promising for the safe long-term storage of radioactive elements. Using synchrotron radiation diffraction, measurements of the thin irradiated layers of the Ce-YSZ and YSZ samples were performed in grazing incidence (GI) mode. A corresponding module for measurements in GI mode was developed at the Rossendorf Beamline and relevant technical details for sample alignment and data collection are also presented.

The direction of particle accelerator development is ever-increasing beam quality, currents and repetition rates. This poses a challenge to traditional diagnostics that directly intercept the beam due to the mutual destruction of both the beam and the diagnostic. An alternative approach is to infer beam parameters non-invasively from the synchrotron radiation emitted in bending magnets. However, inferring the beam distribution from a measured radiation pattern is a complex and computationally expensive task. To address this challenge we present SYRIPY (SYnchrotron Radiation In PYthon), a software package intended as a tool for performing inference of synchrotron-radiation-based diagnostics. SYRIPY has been developed using PyTorch, which makes it both differentiable and able to leverage the high performance of GPUs, two vital characteristics for performing statistical inference. The package consists of three modules: a particle tracker, Lienard–Wiechert solver and Fourier optics propagator, allowing start-to-end simulation of synchrotron radiation detection to be carried out. SYRIPY has been benchmarked against SRW, the prevalent numerical package in the field, showing good agreement and up to a 50× speed improvement. Finally, we have demonstrated how SYRIPY can be used to perform Bayesian inference of beam parameters using stochastic variational inference.

Alignment of each optical element at a synchrotron beamline takes days, even weeks, for each experiment costing valuable beam time. Evolutionary algorithms (EAs), efficient heuristic search methods based on Darwinian evolution, can be utilized for multi-objective optimization problems in different application areas. In this study, the flux and spot size of a synchrotron beam are optimized for two different experimental setups including optical elements such as lenses and mirrors. Calculations were carried out with the X-ray Tracer beamline simulator using swarm intelligence (SI) algorithms and for comparison the same setups were optimized with EAs. The EAs and SI algorithms used in this study for two different experimental setups are the Genetic Algorithm (GA), Non-dominated Sorting Genetic Algorithm II (NSGA-II), Particle Swarm Optimization (PSO) and Artificial Bee Colony (ABC). While one of the algorithms optimizes the lens position, the other focuses on optimizing the focal distances of Kirkpatrick–Baez mirrors. First, mono-objective evolutionary algorithms were used and the spot size or flux values checked separately. After comparison of mono-objective algorithms, the multi-objective evolutionary algorithm NSGA-II was run for both objectives – minimum spot size and maximum flux. Every algorithm configuration was run several times for Monte Carlo simulations since these processes generate random solutions and the simulator also produces solutions that are stochastic. The results show that the PSO algorithm gives the best values over all setups.

To characterize an electron beam, visible synchrotron light is often used and dedicated beamlines at synchrotron sources are becoming a more common feature as instruments and methods for the diagnostics are, along with the accelerators, further developed. At KARA (Karlsruhe Research Accelerator), such a beamline exists and is based on a typical infrared/visible-light configuration. From experience at such beamlines no significant radiation was expected (dose rates larger than 0.5 µSv h−1). This was found not to be the case and a higher dose was measured which fortunately could be shielded to an acceptable level with 0.3 mm of aluminium foil or 2.0 mm of Pyrex glass. The presence of this radiation led to further investigation by both experiment and calculation. A custom setup using a silicon drift detector for energy-dispersive spectroscopy (Ketek GmbH) and attenuation experiments showed the radiation to be predominantly copper K-shell fluorescence and is confirmed by calculation. The measurement of secondary radiation from scattering of synchrotron and other radiation, and its calculation, is important for radiation protection, and, although a lot of experience exists and methods for radiation protection are well established, changes in machine, beamlines and experiments mean a constant appraisal is needed.

With the development of synchrotron radiation sources and high-frame-rate detectors, the amount of experimental data collected at synchrotron radiation beamlines has increased exponentially. As a result, data processing for synchrotron radiation experiments has entered the era of big data. It is becoming increasingly important for beamlines to have the capability to process large-scale data in parallel to keep up with the rapid growth of data. Currently, there is no set of data processing solutions based on the big data technology framework for beamlines. Apache Hadoop is a widely used distributed system architecture for solving the problem of massive data storage and computation. This paper presents a set of distributed data processing schemes for beamlines with experimental data using Hadoop. The Hadoop Distributed File System is utilized as the distributed file storage system, and Hadoop YARN serves as the resource scheduler for the distributed computing cluster. A distributed data processing pipeline that can carry out massively parallel computation is designed and developed using Hadoop Spark. The entire data processing platform adopts a distributed microservice architecture, which makes the system easy to expand, reduces module coupling and improves reliability.

Beamline B21 at the Diamond Light Source synchrotron in the UK is a small-angle X-ray scattering (SAXS) beamline that specializes in high-throughput measurements via automated sample delivery systems. A system has been developed whereby a sample can be illuminated by a focused beam of light coincident with the X-ray beam. The system is compatible with the highly automated sample delivery system at the beamline and allows a beamline user to select a light source from a broad range of wavelengths across the UV and visible spectrum and to control the timing and duration of the light pulse with respect to the X-ray exposure of the SAXS measurement. The intensity of the light source has been characterized across the wavelength range enabling experiments where a quantitative measure of dose is important. Finally, the utility of the system is demonstrated via measurement of several light-responsive samples.

The BL17B beamline at the Shanghai Synchrotron Radiation Facility was first designed as a versatile high-throughput protein crystallography beamline and one of five beamlines affiliated to the National Facility for Protein Science in Shanghai. It was officially opened to users in July 2015. As a bending magnet beamline, BL17B has the advantages of high photon flux, brightness, energy resolution and continuous adjustable energy between 5 and 23 keV. The experimental station excels in crystal screening and structure determination, providing cost-effective routine experimental services to numerous users. Given the interdisciplinary and green energy research demands, BL17B beamline has undergone optimization, expanded its range of experimental methods and enhanced sample environments for a more user-friendly testing mode. These methods include single-crystal X-ray diffraction, powder crystal X-ray diffraction, wide-angle X-ray scattering, grazing-incidence wide-angle X-ray scattering (GIWAXS), and fully scattered atom pair distribution function analysis, covering structure detection from crystalline to amorphous states. This paper primarily presents the performance of the BL17B beamline and the application of the GIWAXS methodology at the beamline in the field of perovskite materials.

The Circular Electron–Positron Collider (CEPC) in China can also work as an excellent powerful synchrotron light source, which can generate high-quality synchrotron radiation. This synchrotron radiation has potential advantages in the medical field as it has a broad spectrum, with energies ranging from visible light to X-rays used in conventional radiotherapy, up to several megaelectronvolts. FLASH radiotherapy is one of the most advanced radiotherapy modalities. It is a radiotherapy method that uses ultra-high dose rate irradiation to achieve the treatment dose in an instant; the ultra-high dose rate used is generally greater than 40 Gy s−1, and this type of radiotherapy can protect normal tissues well. In this paper, the treatment effect of CEPC synchrotron radiation for FLASH radiotherapy was evaluated by simulation. First, a Geant4 simulation was used to build a synchrotron radiation radiotherapy beamline station, and then the dose rate that the CEPC can produce was calculated. A physicochemical model of radiotherapy response kinetics was then established, and a large number of radiotherapy experimental data were comprehensively used to fit and determine the functional relationship between the treatment effect, dose rate and dose. Finally, the macroscopic treatment effect of FLASH radiotherapy was predicted using CEPC synchrotron radiation through the dose rate and the above-mentioned functional relationship. The results show that the synchrotron radiation beam from the CEPC is one of the best beams for FLASH radiotherapy.

α-d-2'-De­oxy­ribonucleosides are products of the γ-irradiation of DNA under oxygen-free conditions and are constituents of anomeric DNA. They are not found as natural building blocks of canonical DNA. Reports on their conformational properties are limited. Herein, the single-crystal X-ray structure of α-d-2'-de­oxy­adenosine (α-dA), C10H13N5O3, and its conformational parameters were determined. In the crystalline state, α-dA forms two conformers in the asymmetric unit which are connected by hydro­gen bonds. The sugar moiety of each conformer is arranged in a `clamp'-like fashion with respect to the other conformer, forming hydro­gen bonds to its nucleobase and sugar residue. For both conformers, a syn conformation of the nucleobase with respect to the sugar moiety was found. This is contrary to the anti conformation usually preferred by α-nucleosides. The sugar conformation of both conformers is C2'-endo, and the 5'-hydroxyl groups are in a +sc orientation, probably due to the hydro­gen bonds formed by the conformers. The formation of the supra­molecular assembly of α-dA is controlled by hydro­gen bonding and stacking inter­actions, which was verified by a Hirshfeld and curvedness surface analysis. Chains of hydro­gen-bonded nucleobases extend parallel to the b direction and are linked to equivalent chains by hydro­gen bonds involving the sugar moieties to form a sheet. A com­parison of the solid-state structures of the anomeric 2'-de­oxy­adenosines revealed significant differences of their conformational parameters.

Radiation damage remains one of the major impediments to accurate structure solution in macromolecular crystallography. The artefacts of radiation damage can manifest as structural changes that result in incorrect biological interpretations being drawn from a model, they can reduce the resolution to which data can be collected and they can even prevent structure solution entirely. In this article, we discuss how to identify and mitigate against the effects of radiation damage at each stage in the macromolecular crystal structure-solution pipeline.

The interaction of intense synchrotron radiation with molecular crystals frequently modifies the crystal structure by breaking bonds, producing fragments and, hence, inducing disorder. Here, a second-rank tensor of radiation-induced lattice strain is proposed to characterize the structural susceptibility to radiation. Quantitative estimates are derived using a linear response approximation from experimental data collected on three materials Hg(NO3)2(PPh3)2, Hg(CN)2(PPh3)2 and BiPh3 [PPh3 = triphenylphosphine, P(C6H5)3; Ph = phenyl, C6H5], and are compared with the corresponding thermal expansivities. The associated eigenvalues and eigenvectors show that the two tensors are not the same and therefore probe truly different structural responses. The tensor of radiative expansion serves as a measure of the susceptibility of crystal structures to radiation damage.

X-ray absorption spectroscopy (XAS) is a promising technique for determining structural information from sensitive biological samples, but high-accuracy X-ray absorption fine structure (XAFS) requires corrections of systematic errors in experimental data. Low-temperature XAS and room-temperature X-ray absorption spectro-electrochemical (XAS-EC) measurements of N-truncated amyloid-β samples were collected and corrected for systematic effects such as dead time, detector efficiencies, monochromator glitches, self-absorption, radiation damage and noise at higher wavenumber (k). A new protocol was developed using extended X-ray absorption fine structure (EXAFS) data analysis for monitoring radiation damage in real time and post-analysis. The reliability of the structural determinations and consistency were validated using the XAS measurement experimental uncertainty. The correction of detector pixel efficiencies improved the fitting χ2 by 12%. An improvement of about 2.5% of the structural fitting was obtained after dead-time corrections. Normalization allowed the elimination of 90% of the monochromator glitches. The remaining glitches were manually removed. The dispersion of spectra due to self-absorption was corrected. Standard errors of experimental measurements were propagated from pointwise variance of the spectra after systematic corrections. Calculated uncertainties were used in structural refinements for obtaining precise and reliable values of structural parameters including atomic bond lengths and thermal parameters. This has permitted hypothesis testing.

BL19U1, an energy-tunable protein complex crystallography beamline at the Shanghai Synchrotron Radiation Facility, has emerged as one of the most productive MX beamlines since opening to the public in July 2015. As of October 2023, it has contributed to over 2000 protein structures deposited in the Protein Data Bank (PDB), resulting in the publication of more than 1000 scientific papers. In response to increasing interest in structure-based drug design utilizing X-ray crystallography for fragment library screening, enhancements have been implemented in both hardware and data collection systems on the beamline to optimize efficiency. Hardware upgrades include the transition from MD2 to MD2S for the diffractometer, alongside the installation of a humidity controller featuring a rapid nozzle exchanger. This allows users to opt for either low-temperature or room-temperature data collection modes. The control system has been upgraded from Blu-Ice to MXCuBE3, which supports website-mode data collection, providing enhanced compatibility and easy expansion with new features. An automated data processing pipeline has also been developed to offer users real-time feedback on data quality.

We describe an ultra-compact setup for in situ X-ray diffraction on the inelastic X-ray scattering beamline ID20 at the European Synchrotron Radiation Facility. The main motivation for the design and construction of this setup is the increasing demand for on-the-fly sample characterization, as well as ease of navigation through a sample's phase diagram, for example subjected to high-pressure and/or high-temperature conditions. We provide technical details and demonstrate the performance of the setup.

A novel in situ/operando method is introduced to measure the photon beam stability of synchrotron radiation based on orthogonal diffraction imaging of a Laue crystal/analyzer, which can decouple the energy/wavelength and Bragg angle of the photon beam using the dispersion effect in the diffraction process. The method was used to measure the energy jitter and drift of the photon beam on BL09B and BL16U at the Shanghai Synchrotron Radiation Facility. The experimental results show that this method can provide a fast way to measure the beam stability of different light sources including bending magnet and undulator with meV-level energy resolution and ms-level time response.

A preponderance of scientific evidence shows that even low doses of ionizing radiation, such as gamma rays and X-rays, are likely to pose some risk of adverse health effects, says a new report from the National Academies National Research Council.

As NASA prepares to send astronauts to the moon and Mars, it is revisiting the latest research on cancer risk from space radiation. A new report recommends NASA proceed with setting a new radiation exposure limit, and improve how it communicates cancer risk to astronauts.

The U.S. should establish a new coordinated research program to investigate the impacts of exposure to low doses of radiation on human health, says a new report estimating that $100 million in funding will be needed annually for the next 15 years to answer key research questions.

For the first time, researchers from the Wellcome Trust Sanger Institute and their collaborators have been able to identify in human cancers two characteristic patterns of DNA damage caused by ionising radiation. These fingerprint patterns may now enable doctors to identify which tumours have been caused by radiation, and investigate if they should be treated differently.

read more

Valentine's Day is just around the corner, and for those looking to express love and support to cancer survivors, Legend of the Spa has unveiled a thoughtful and soothing gift option: the Pink Lotus Radiation Recovery Cream, for post radiation.

Mark P. Little lends years of expertise to his work with the National Cancer Institute and Oxford Brookes University

The West Virginia Supreme Court upheld an award of benefits for a worker’s cancer and radiation exposure. Case: West Virginia Division of Highways v. Scott, No. 23-258, 08/01/2024, published. Facts: Larry Scott…

How will future Mars astronauts shield themselves from harmful space radiation? This is what a recent study published in The European Physical Journal Plus

Removing asbestos requires precision and care to ensure that everybody on the job site is safe. New technology may make this line of work more manageable and efficient for contractors.

Tajikistan’s National Action Plan on implementing UN Security Council Resolution 1540, which was supported by the OSCE Office in Tajikistan as a way of enhancing the country’s chemical, biological, radiation and nuclear security, was presented to representatives of the international community in Dushanbe on 28 April 2016.

As well as bringing together representatives of international organizations dealing with non-proliferation issues, and embassies and diplomatic missions of the OSCE participating States and the UN members in Tajikistan, some 30 professionals in the area of chemical, biological, radiation and nuclear security in Tajikistan also attended the meeting. The discussion was held to mark the adoption of UN Security Council Resolution 1540 on 28 April 2004.

“As we have now already moved to the implementation phase of the Plan, I have no doubt that we all understand the importance of the need to provide resources that are indispensable for strengthening co-operation and collaboration in implementing the approved 1540 measures,” said Fabio Piana, Acting Head of the OSCE Office in Tajikistan. “Diplomatic missions of the OSCE participating States or UN Member States in Tajikistan are encouraged to take part in implementing Tajikistan’s National Action Plan, with the aim of ensuring the overall sustainability of our joint efforts.”

Ilkhom Mirsaidov, National co-ordinator on implementing the National Action Plan, thanked the OSCE for the assistance provided in developing the Plan – a process that took two years to accomplish. He also stressed the importance of multilateral co-operation and co-ordination of efforts during its implementation.

The National Action Plan, encompassing various implementation measures on nuclear, chemical, and biological security for 2016-2021, was adopted by Tajikistan’s Government on 9 February 2016.

The Office, in close co-operation with the OSCE Conflict Prevention Centre, United Nations Office for Disarmament Affairs, and the 1540 Committee Group of Experts, will continue to assist the Government in the Plan’s practical implementation.

Related Stories

• OSCE Office in Tajikistan organizes first regional forum for promoting women’s political participation in Khujand
• OSCE Office in Tajikistan presents recommendations from the Customs Code Integrity Assessment
• OSCE Office in Tajikistan donates audio-visual material to enhance interactive teaching at Police Academy

Overview of particle radiation effects on telecommunication systems

Neutron irradiation test methods for telecommunication equipment

Reliability requirements for telecommunication systems affected by particle radiation

Quality estimation methods and application guidelines for mitigation measures based on particle radiation tests

Proposal of second draft of K.soft_ba "Overview of particle radiation effects on telecommunications systems"
Source: Fujitsu Limited, Xilinx Incorporation

An experimental program seeks to protect California almond trees from a pesky moth by using X-rays to sterilize the insects.

Few drugs are available to treat heavy metals that enter the body, either from lead poisoning or nuclear fallout. A UC Berkeley startup hopes to change that.

DEPARTMENT OF HEALTH AND SOCIAL SERVICES: Division of Public Health

DEPARTMENT OF HEALTH AND SOCIAL SERVICES: Division of Public Health