Don Tapscott, chairman of nGenera Insight and coauthor of "Macrowikinomics: Rebooting Business and the World."

Mihir Desai, Harvard Business School professor and author of the HBR article "The Incentive Bubble."

Margaret Parker, MD, MCCM, speaks with Philip Toltzis, MD. Dr. Toltzis is Professor of Pediatrics at Case Western Reserve University School of Medicine.

The study ‘Sustainable biomass and bioenergy in the Netherlands’ was carried out by researchers Goh, Mai-Moulin and Junginger from Utrecht University in the framework of the Netherlands Programmes Sustainable Biomass. It looks at “biomass from the three major categories, i.e. woody biomass, oils and fats and carbohydrates used in different sectors in the Netherlands”.

For each of these three categories a Sankey diagram is presented, like for example this one for oils and fats.
[See image gallery at www.sankey-diagrams.com]
The diagram has a very clear structure. Import streams are from the top and exports leave to the bottom. Domestic Dutch production is from the left, use of oils and fats in the Netherlands is to the right. Flows are in million tons (MT) dry mass. Data is for the year 2014.

See the full report here.

Top trainer Mike de Kock has warned of a “grim reality” featuring “loss of jobs and euthanasia” of significant parts of the horse population if the South African racing shutdown continues. On Tuesday, the South African government blocked plans for a resumption when it refused to allow the sport to take place under Lockdown Level […]

The post Trainer Mike de Kock Warns Of Mass Job Loss, Euthanasias In South Africa If Racing Shutdown Continues appeared first on Horse Racing News | Paulick Report.

Cofiring wood and coal at Fairbanks, Alaska, area electrical generation facilities represents an opportunity to use woody biomass from clearings within the borough's wildland-urban interface and from other sources, such as sawmill residues and woody material intended for landfills. Potential benefits of cofiring include air quality improvements, reduced greenhouse gas emissions, market and employment development opportunities, and reduction of municipal wood residues at area landfills. Important issues that must be addressed to enable cofiring include wood chip uniformity and quality, fuel mixing procedures, transportation and wood chip processing costs, infrastructure requirements, and long-term biomass supply. Additional steps in implementing successful cofiring programs could include test burns, an assessment of area biomass supply and treatment needs, and a detailed economic and technical feasibility study. Although Fairbanks North Star Borough is well positioned to use biomass for cofiring at coal burning facilities, long-term cofiring operations would require expansion of biomass sources beyond defensible-space-related clearings alone. Long-term sources could potentially include a range of woody materials including forest harvesting residues, sawmill residues, and municipal wastes.

The Chugach and Tongass National Forests are changing, possibly in response to global warming.

In rural Alaskan communities, high economic, social, and ecological costs are associated with fossil fuel use for power generation.

Woody biomass can be used for the generation of heat, electricity, and biofuels. In many cases, the technology for converting woody biomass into energy has been established for decades, but because the price of woody biomass energy has not been competitive with traditional fossil fuels, bioenergy production from woody biomass has not been widely adopted. However, current projections of future energy use and renewable energy and climate change legislation under consideration suggest increased use of both forest and agriculture biomass energy in the coming decades.

The Fall River research site in coastal Washington is an affiliate installation of the North American Long-Term Soil Productivity (LTSP) network, which constitutes one of the world's largest coordinated research programs addressing forest management impacts on sustained productivity. Overall goals of the Fall River study are to assess effects of biomass removals, soil compaction, tillage, and vegetation control on site properties and growth of planted Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco). Biomass-removal treatments included removal of commercial bole (BO), bole to 5-cm top diameter (BO5), total tree (TT), and total tree plus all legacy woody debris (TT+). Vegetation control (VC) effects were tested in BO, while soil compaction and compaction plus tillage were imposed in BO+VC treatment. All treatments were imposed in 1999. The preharvest stand contained similar amounts of carbon (C) above the mineral soil (292 Mg/ha) as within the mineral soil to 80- cm depth including roots (298 Mg/ha). Carbon stores above the mineral soil ordered by size were live trees (193 Mg/ha), old-growth logs (37 Mg/ha), forest floor (27 Mg/ha), old-growth stumps and snags (17 Mg/ha), coarse woody debris (11 Mg/ha), dead trees/snags (7 Mg/ha), and understory vegetation (0.1 Mg/ha). The mineral soil to 80-cm depth contained 248 Mg C/ha, and roots added 41 Mg/ha. Total nitrogen (N) in mineral soil and roots (13 349 kg/ha) was more than 10 times the N store above the mineral soil (1323 kg/ha). Postharvest C above mineral soil decreased to 129, 120, 63, and 50 Mg/ha in BO, BO5, TT, and TT+, respectively. Total N above the mineral soil decreased to 722, 747, 414, and 353 Mg/ha in BO, BO5, TT, and TT+, respectively. The ratio of total C above the mineral soil to total C within the mineral soil was markedly altered by biomass removal, but proportions of total N stores were reduced only 3 to 6 percent owing to the large soil N reservoir on site.

We examine the use of woody residues, primarily from forest harvesting or wood products manufacturing operations (and to a limited degree from urban wood wastes), as a feedstock for direct-combustion bioenergy systems for electrical or thermal power applications. We examine opportunities for utilizing biomass for energy at several different scales, with an emphasis on larger scale electrical power generation at stand-alone facilities, and on smaller scale facilities (thermal heating only) such as governmental, educational, or other institutional facilities. We then identify west-wide barriers that tend to inhibit bioenergy applications, including accessibility, terrain, harvesting costs, and capital costs. Finally, we evaluate the role of government as a catalyst in stimulating new technologies and new uses of biomass material.

Timber availability, aboveground tree biomass, and changes in aboveground carbon pools are important consequences of landscape management.

Cofiring of biomass and coal at electrical generation facilities is gaining in importance as a means of reducing fossil fuel consumption, and more than 40 facilities in the United States have conducted test burns. Given the large size of many coal plants, cofiring at even low rates has the potential to utilize relatively large volumes of biomass. This could have important forest management implications if harvest residues or salvage timber are supplied to coal plants. Other feedstocks suitable for cofiring include wood products manufacturing residues, woody municipal wastes, agricultural residues, short-rotation intensive culture forests, or hazard fuel removals. Cofiring at low rates can often be done with minimal changes to plant handling and processing equipment, requiring little capital investment. Cofiring at higher rates can involve repowering entire burners to burn biomass in place of coal, or in some cases, repowering entire powerplants. Our research evaluates the current status of biomass cofiring in North America, identifying current trends and success stories, types of biomass used, coal plant sizes, and primary cofiring regions. We also identify potential barriers to cofiring. Results are presented for more than a dozen plants that are currently cofiring or have recently announced plans to cofire.

This handbook and financial app is a guide to help communities quickly determine if biomass energy projects might work for them so that this option is not overlooked. Its purpose is as a screening tool designed to save significant time, resources, and investment by weeding out those wood energy projects that may never come to fruition from those that have a chance of success. It establishes technical, financial, and social criteria and indicators to evaluate proposed biomass investment options. Through showcasing of successful projects using text, photos, video interviews, and diagrams, it facilitates virtual project planning and interaction with experts. The interactive wood energy financial app allows estimation of capital investment costs to facilitate project design and screening across a variety of wood energy options. The calculator can be accessed from the eBook or from the Web.

If you’re a local businessperson, an entrepreneur, a tribal partner, a community organizer; a decision-maker for a school district, college, or hospital; a government leader; a project developer; an industry leader; or an equipment manufacturer, the Alaska Community Handbook will be helpful to you.

This book is intended to help people better understand how wood energy is helping to revitalize rural Alaskan communities by reducing energy costs, creating jobs, and helping to educate the next generation.

The Community Biomass Handbook Volume 4: Enterprise Development for Integrated Wood Manufacturing is a guide for creating sustainable business enterprises using small diameter logs and biomass. This fourth volume is a companion to three Community Biomass Handbook volumes: Volume 1: Thermal Wood Energy; Volume 2: Alaska, Where Woody Biomass Can Work; and Volume 3: How Wood Energy is Revitalizing Rural Alaska. This volume is designed to help business partnerships, forest managers, and community groups rapidly explore and evaluate integrated manufacturing opportunities.

A look into Massachusetts ethnic/race/country of origin by town.

By Jessica Corbett Common Dreams Far-reaching global assessment details how humanity is undermining the very foundations of the natural world     On the heels of an Earth Day that featured calls for radical action to address the current “age … Continue reading →

By Jessica Corbett Common Dreams Far-reaching global assessment details how humanity is undermining the very foundations of the natural world     On the heels of an Earth Day that featured calls for radical action to address the current “age … Continue reading →

We prove a Marstrand type slicing theorem for the subsets of the integer square lattice. This problem is the dual of the corresponding projection theorem, which was considered by Glasscock, and Lima and Moreira, with the mass and counting dimensions applied to subsets of $mathbb{Z}^{d}$. In this paper, more generally we deal with a subset of the plane that is $1$ separated, and the result for subsets of the integer lattice follow as a special case. We show that the natural slicing question in this setting is true with the mass dimension.

We study the time-averaged flux in a model of particles that randomly hop on a finite directed graph. In the limit as the number of particles and the time window go to infinity but the graph remains finite, the large-deviation rate functional of the average flux is given by a variational formulation involving paths of the density and flux. We give sufficient conditions under which the large deviations of a given time averaged flux is determined by paths that are constant in time. We then consider a class of models on a discrete ring for which it is possible to show that a better strategy is obtained producing a time-dependent path. This phenomenon, called a dynamical phase transition, is known to occur for some particle systems in the hydrodynamic scaling limit, which is thus extended to the setting of a finite graph.

Funding the production of quality online content is a pressing problem for content producers. The most common funding method, online advertising, is rife with well-known performance and privacy harms, and an intractable subject-agent conflict: many users do not want to see advertisements, depriving the site of needed funding.

Because of these negative aspects of advertisement-based funding, paywalls are an increasingly popular alternative for websites. This shift to a "pay-for-access" web is one that has potentially huge implications for the web and society. Instead of a system where information (nominally) flows freely, paywalls create a web where high quality information is available to fewer and fewer people, leaving the rest of the web users with less information, that might be also less accurate and of lower quality. Despite the potential significance of a move from an "advertising-but-open" web to a "paywalled" web, we find this issue understudied.

This work addresses this gap in our understanding by measuring how widely paywalls have been adopted, what kinds of sites use paywalls, and the distribution of policies enforced by paywalls. A partial list of our findings include that (i) paywall use is accelerating (2x more paywalls every 6 months), (ii) paywall adoption differs by country (e.g. 18.75% in US, 12.69% in Australia), (iii) paywalls change how users interact with sites (e.g. higher bounce rates, less incoming links), (iv) the median cost of an annual paywall access is $108 per site, and (v) paywalls are in general trivial to circumvent.

Finally, we present the design of a novel, automated system for detecting whether a site uses a paywall, through the combination of runtime browser instrumentation and repeated programmatic interactions with the site. We intend this classifier to augment future, longitudinal measurements of paywall use and behavior.

In this paper, we propose a new nonlinear detector with improved interference suppression in Multi-User Multiple Input, Multiple Output (MU-MIMO) system. The proposed detector is a combination of the following parts: QR decomposition (QRD), low complexity users sorting before QRD, sorting-reduced (SR) K-best method and minimum mean square error (MMSE) pre-processing. Our method outperforms a linear interference rejection combining (IRC, i.e. MMSE naturally) method significantly in both strong interference and additive white noise scenarios with both ideal and real channel estimations. This result has wide application importance for scenarios with strong interference, i.e. when co-located users utilize the internet in stadium, highway, shopping center, etc. Simulation results are presented for the non-line of sight 3D-UMa model of 5G QuaDRiGa 2.0 channel for 16 highly correlated single-antenna users with QAM16 modulation in 64 antennas of Massive MIMO system. The performance was compared with MMSE and other detection approaches.

We utilize recent results on the exact block error probability of Gaussian random codes in additive white Gaussian noise to analyze Gaussian random coding for massive multiple-access at finite message length. Soft iterative interference cancellation is found to closely approach the performance bounds recently found in [1]. The existence of two fundamentally different regimes in the trade-off between power and bandwidth efficiency reported in [2] is related to much older results in [3] on power optimization by linear programming. Furthermore, we tighten the achievability bounds of [1] in the low power regime and show that orthogonal constellations are very close to the theoretical limits for message lengths around 100 and above.

By Jeff Mulhollem Penn State News The first harvest of 34 acres of fast-growing shrub willow from a Penn State demonstration field this winter is a milestone in developing a sustainable biomass supply for renewable energy and bio-based economic development, … Continue reading →

By The Office of Energy Efficiency & Renewable Energy Within 25 years, the United States could produce enough biomass to support a bioeconomy, including renewable aquatic and terrestrial biomass resources that could be used for energy and to develop products … Continue reading →

This is hardly the first time the Catholic Church has to deal with a plague. Spokane Bishop Thomas Daly knows that well.…

Thirty years into his distinguished career as one of the world's great guitar players, Joe Bonamassa is still finding new ways to showcase his skills, explore new sounds and stretch his artistic horizons.…

An improved biomass feed system and processes for transporting biomass to downstream processing locations are disclosed. The system uses a pressurized gas to assist in the transporting of the biomass to the conversion reactor.

Disclosed is a process for biomass conversion which includes co-processing the biomass with thermoplastic and non-thermoplastic polymer based materials in a catalytic pyrolysis reactor to convert such to liquid hydrocarbons; wherein hydrogen atoms originating with the polymer materials can remove oxygen from oxygenated hydrocarbons produced in the conversion of the biomass in the reactor.

A process for the conversion of biomass to hydrocarbon products such as transportation fuels, kerosene, diesel oil, fuel oil, chemical and refinery plant feeds. The instant process uses a hydrocarbon or synthesis gas co-feed and hot pressurized water to convert the biomass in a manner commonly referred to as hydrothermal liquefaction.

Method of extracting syngas between the zone in a furnace where oxygen-starved combustion of biomass occurs and the zone in the furnace where secondary air is added to complete combustion, conditioning and cleaning the extracted syngas, and delivering it in a metered amount to the oxidizer or upstream of the oxidizer to reduce or eliminate the need for additional fossil fuels once the oxidizer has achieved its operating temperature. The gasifier or furnace burns solid waste and produces a syngas containing relatively high levels of CO, which is extracted from the furnace, conditioned, and introduced into an RTO as a fuel source. In certain embodiments, no extraction of syngas from the furnace takes place; the furnace conditions are manipulated so that normally undesirable levels of CO and other VOC's remain in the process stream. The heat from the furnace is used as intended (e.g., to heat a dryer), the stream is conditioned, and ultimately proceeds to a downstream RTO. Since the gas stream remains rich in CO and VOC's, its fuel value in the RTO is substantially higher than otherwise would be the case.

Methods or preparing para-xylene from biomass by carrying out a Diels-Alder cycloaddition at controlled temperatures and activity ratios. Methods of preparing bio-terephthalic acid and bio-poly(ethylene terephthalate (bio-PET) are also disclosed, as well as products formed from bio-PET.

The present invention provides a resin capable of contributing greatly to solve environmental problems and problems related to exhaustion of fossil fuel resources and having physical properties suited for practical use. The polyester according to the present invention has a diol and a dicarboxylic acid as constituent components and has an amount of terminal acid of 50 equivalents/metric ton or less.

A device is described for measuring electrical characteristics of biological tissues with one or a plurality of electrodes and a processor controlling the stimulation and measurement in order to detect the presence of abnormal tissue masses in the breast and determine probability of tumors containing malignant cancer cells being present in a breast. The device has the capability of providing the location of the abnormality, at least to the quadrant. Either single or multiple source electrodes can be used. Either palpable lumps can be evaluated or screening or breasts, whether with palpable masses or not, can be accomplished. The method for measuring electrical characteristics includes placing electrodes and applying a voltage waveform in conjunction with a current detector. A mathematical analysis method is then applied to the collected data, which computes spectrum of frequencies and correlates magnitudes and phases with given algebraic conditions to determine mass presence and type.

A method is disclosed for generating a mass spectrum, e.g. for Fourier transform mass spectrometry, having improved resolving power. The method includes steps of acquiring a plurality of mass spectra from a mass spectrometer using image current detection determining the centroids of at least some of the peaks which have a sufficient signal-to-noise (S/N) ratio so that the variation of the centroid of each such peak from the plurality of mass spectra is significantly lower than the full-width at half-maximum, dM, of the peak in the m/z domain; and generating a histogram of the centroids determined from the plurality of acquired mass spectra thereby forming a composite mass spectrum. The resultant composite mass spectrum comprises peaks having full-width at half-maximum, dMC, significantly narrower than the peak width, dM, of the corresponding peaks in the plurality of acquired mass spectra.

A biomass gasification gas purification system includes a dust collector for removing dust in biomass gasification gas (containing tar components) acquired by gasifying biomass by a biomass gasification furnace, a desulfurizer for removing sulfur oxide components in the dust-removed biomass gasification gas, a pre-reforming reactor for reforming tar components in the desulfurized biomass gasification gas, a steam feed unit for feeding steam to an upstream side of the pre-reforming reactor, and a natural-gas feed unit for feeding natural gas on an upstream side of the desulfurizer.

A portable hydro massage device for submersion in a body of water containing a female user, i.e. a bathtub, provides a local massage to the labium region and a focused stimulant to the female user's clitoris thereby resulting in a superior sensation to the entire body promoting an overall euphoric state and calming effect. The apparatus employs a saddle shaped housing, where the buttocks are placed, and a saddle horn for controlling the stimulus. Disposed within the midsection of the saddle horn is a hydro jet with a driven flow from a circulating water pump that draws suction from the main body of water. The hydro jet is adjustable in pressure and a method is provided for aeration of the water discharged to allow for a rhythmic pulsation effect. The saddle horn may be held and the lower body positioned as needed to focus the discharged stream from the hydro jet to the desired point of the pelvic region.

A massage roller includes a generally resilient roller body and a plurality of massage zones having various densities provided on the roller body.

A foot massaging device having a plurality of parallel cylindrical rollers mounted within a frame. The frame includes adjustment slots allowing the rollers to be relocated within the frame to present various massaging configurations. The foot massaging device is adjustable by seating the rearwardly disposed rollers between a raised and lowered position to configure the rollers to contact different portions of a user's foot.

The present invention provides in some embodiments, a portable device for massaging and treating a person's muscles. The device can include an elongate center shaft and a roller section rotatably positioned about the outer surface of the elongate cylindrical center shaft and extending at least a portion of a distance between the first end of the elongate cylindrical center shaft and the second end of the elongate cylindrical center shaft. The device can also include a first and second handle coupled to the elongate center shaft. The first and second handles can be configured to collapse in order to decrease an overall length of the portable roller massager.

A massage device is disclosed and may include a substantially solid body with an array of at least twenty, and in some cases thirty or thirty-two or more, massage fingers each with an outward tip, an inward base and a center axis, the center axis extending to a center of the body. The massage fingers are spaced about the body at substantially equal distances from each of at least three, and in some cases up to five or six, massage fingers nearest to each massage finger such that the center axis of each massage finger is spaced and positioned to correspond to a location of one of at least twenty vertices of a polyhedron, in some cases a pentakis dodecahedron, and aligns with a vertex axis extending from a polyhedron center point through one of the vertices of the polyhedron.

The present invention relates to methodology and constructs for modifying plant architecture and enhancing plant biomass and/or sucrose yield.

A ceramic mass transfer packing element that includes a planar end surface which intersects an internal wall's geometric plane at an acute angle is disclosed. A process for making the packing element and an apparatus that uses the packing element are also disclosed.

The present invention provides variable mass labeling reagents, a set of the variable mass labeling reagents, and a multiplexed set of variable mass labeling reagents.

A biomass conveying and distributing system for separating and distributing lighter biomass residue from heavier or denser biomass, utilizing available air flow from the cleaning system of the harvester. The harvester will discharge a flow of heavier or denser biomass with an airborne flow of lighter biomass residue. The system includes a conveyor for receiving and conveying the heavier or denser biomass, and residue distributing apparatus disposed above the conveyor in a path of at least a portion of the airborne flow of lighter residue, including at least one deflector configured and operable for redirecting the airborne flow sidewardly away from the conveyor, above a passage through which the conveyor passes carrying the heavier biomass away from the harvester.

A feed system for a biomass collection device uses a conveyor for dropping a flow comprising a mixture of denser or heavier biomass to be collected such as cobs, and less dense or lighter biomass residue such as leaf trash, through a space, and rotary feed apparatus below for receiving the flow, operable for propelling the received flow into a collection device, in combination with a fan configured and operable for directing a flow of air along a second path intersecting the first path in a manner to divert at least a substantial portion of the less dense or lighter biomass residue away from the feed apparatus, while allowing substantially all of the denser or heavier biomass to continue along the first path to the feed apparatus for feeding into the collection device. Distribution apparatus along the second path can then be used to spread the diverted biomass.

A biomass feed system includes a device to propel an airborne flow of the biomass along a trajectory within a collection device. At least one air flow port is disposed and operable in cooperation with at least one fan for discharging a flow of air for creating a blanket of pressurized air within the interior cavity beneath the trajectory for supporting and extending a distance of travel of the biomass within the collection device. The collection device can include an air flow outlet adjacent to a terminal end of the trajectory, to and through which the pressurized air will flow, in a manner for lifting and carrying at least some of the airborne biomass farther into the interior cavity. And, vanes or other elements can be provided to used to achieve better sideward distribution.

A new type of portable USB mass storage gadget is disclosed which provides the user with upgradeable high speed mass storage and processing for use with portable computer appliances such as smart phones and tablets as well as standard desk top computers and laptops. Various modifications to the embodiment referred to as a UDRIVE are disclosed including a battery option, wireless connectivity, security, and additional internal electronics and external interfaces that allow processing of the data stored or sent to the portable gadget.