Introduction Android* applications may require a peer-to-peer connection between two or more Android* devices without a Wi-Fi access point or Internet access. Two examples of this are file sharing...

  Trine* 2 from Frozenbyte, Inc. struggled with optimal playability on Intel® processor-based touchscreens and 2 in 1s running Windows* 8. Supporting varied play styles and local multiplayer require...

  With augmented reality (AR) reaching smartphones, tablets, wearables (such as Google Glass*), and other platforms, the market is ripe for an AR development explosion across every conceivable applicati...

  Many people take medication, sometimes multiple times per day, to help them stay healthy. Making sure meds are taken on time and in the right doses requires an individual to be vigilant and discipline...

  More and more Android devices have Intel Inside. Besides getting your hands on Intel-based Android devices to test your apps and make sure they deliver the best experience for your users, there are se...

  When developing an Android* application, you usually need to test, optimize, and debug on many different platforms. While basically every hardware and chip manufacturer provides a set of custom tools...

  Last month, Pokémon GO officially launched in… Oh, wait! Not again! Not another article about augmented reality starting with Pokémon GO! It almost seems as if Pokémon GO a...

She also encouraged the NDB to take appropriate steps to join the G-20 forum, along with the multilateral development banks and international financial institutions.

In view of the massive disruption to economic activity due to Covid-19 impact and likely huge shortfall in revenues, the council felt that fiscal response to the crisis should be much more nuanced.

In the case of Covid-19, hazardous waste is being generated in hospitals, quarantine zones or red zone areas within cities. They are potential sources of Covid-19 and can cause further spread within the locality.

Technology will play a crucial role in developing the EV ecosystem including in design, simulation, manufacturing and developing the overall vehicle cycle.

There have been Latest developments for H-1B visa holders in the US in the matter of switching jobs. It deals with the issue of obtaining a new job similar to the old which requires similar skills.Specialty Occupation Clause The US Citizenship and…

There is news in relation to EB-5 investment visas like the extension of 2020 program, the future predictions on visa bulletin, and finally the regulation changes.The Extension of the 2020 ProgramThe extended date presently is September 30th, 2020 as…

The institute, based in Thiruvananthapuram, aspires to emerge as a digital university with emphasis on blockchain, artificial intelligence, data analytics, cognitive science, internet of things and augmented reality.

A great personality makes you socially-acceptable. There is a difference when you talk to someone by looking directly into their eyes, compared to speaking with no eye contact.

This would provide enough isolation to the patient and protection to health workers and family. The ventilator can be controlled using the app and provides real-time display of the waveforms.

Earlier Shoaib Akhtar had made an appeal to Indian authorities to manufacture 10,000 ventilators to support Pakistan’s crumbling health infrastructure and an ailing economy.

Jim Harris explains the relevance of DevOps, DataOps and ModelOps for data analytics practitioners.

The post Why Ops-ing is in (DevOps, ModelOps, DataOps) appeared first on The Data Roundtable.

There will be no darshans in all the government-controlled temples in Himachal Pradesh in view of the possibility of people getting infected with the coronavirus in gatherings, the state government said in a statement.

"Shri Mata Vaishno Devi Yatra has been closed from today. Operations of all interstate buses -- incoming and outgoing from Jammu and Kashmir, banned from today," the Jammu and Kashmir Director of Information and Public Relations (DIPR) said in a tweet.

Some schools of thought suggest that the eruption pushed Earth into volcanic winter that lasted as long as six years and the planet Earth had to endure a longish cooling period of a thousand years.

More than a thousand face shields have been dispatched for the doctors and healthcare staff of AIIMS Rishikesh.

The proposals have been sought by the Directorate of Human Space Programme of the Bangalore-headquartered ISRO for a total of 18 tentative technology development areas.

Sir, We have 300 sq yards of land in Visakhapatnam. We would like to give it to development to a builder for the construction of apartment. What are the precautions to be taken by us so that the entire process is completed without any issues??

The Indian Institute of Technology-Madras’ (IIT-M) incubated start-up Muse Wearables has developed new methods for coating textiles with nanoparticles-based antimicrobial agents that can ‘inactivate’ the human coronavirus on contact.

The death toll due to COVID-19 rose to 1,981 and the number of cases climbed to 59,662 in the country on Saturday, the Health Ministry said.

While Devika Bhise had earlier delighted fans by sharing a few snaps from the wedding day and pre-wedding functions on Instagram, designer Anita Dongre took to Instagram this morning to give them...

In what seems like a rather weird glitch, it appears that there is a growing number of complaints amongst OnePlus users who are finding that their headphones audio channels are being wrongly swapped when connected.

Economic development with Inclusivity says Prime Minister Modi in his maiden speech in Parliament

BRICS nations to form $100 billion development bank as an alternative to World Bank, IMF

A radical new form of universal basic income could revitalise damaged economies

While countries in east Asia and Europe are gradually taking steps towards reopening their economies, many in the global south are wondering whether the worst of the pandemic is yet to come. As economists who work on poverty alleviation in developing countries, we are often asked what the effects of coronavirus will be in south Asia and Africa. The truth is, we don’t know. Without extensive testing to map the number of cases, it’s impossible to tell how far the virus has already spread. We don’t yet have enough information about how Covid-19 behaves under different conditions such as sunlight, heat and humidity. Developing countries’ more youthful populations may spare them the worst of the pandemic, but health systems in the global south are poorly equipped to deal with an outbreak, and poverty is linked to co-morbidities that put people at a higher risk of serious illness.

Without the information widespread testing provides, many poorer countries have taken an extremely cautious approach. India imposed a total lockdown on 24 March, by which time the country had about 500 confirmed cases. Countries such as Rwanda, South Africa and Nigeria enforced lockdowns in late March, long before the virus was expected to peak. But these lockdown measures can’t last forever. Poorer countries could have used the quarantine to buy time, gather information about how the disease behaves and develop a testing and tracing strategy. Unfortunately, not much of this has happened. And, far from coming to their aid, rich countries have outrun poorer nations in the race for PPE, oxygen and ventilators.

PCI-SIG DevCon 2019 APAC tour has come to Tokyo and Taipei this year. The focus is predominantly around the latest updates for PCIe Gen 5 which its version 1.0 specification was just released this year in May.  A series of presentations provided by PCI-SIG on the day 1 with comprehensive information covering all aspects of Gen 5 specification, including protocol, logical, electrical, compliance updates. On the day 2 (only in Taipei), several member companies shared their view on Testing, PCB analysis and Signal integrity. The exhibit is also another spotlight of this event where the member companies showcased their latest PCIe solutions.

Presentation Track (Taipei), Exhibit (Tokyo), Exhibit (Taipei) 

Cadence, as the market leading PCIe IP vendor, participated APAC tour this year with bringing in its latest PCIe IP solution offering (Gen 5/4) to the region as well as showcasing two live demo setups in the exhibit floor. One setup is the PCIe software development kit (SDK) while the other is the Interop/compliance/debug platform. Both come with the Cadence PCIe Gen 4 hardware setup and its corresponding software kit.

The SDK can be used for Device Driver Development, Firmware Development, and for pre-silicon emulation as well. It supports Xtensa and ARM processor with Linux OS and it also equip with Ethernet interface which can be used for remote debugging. It also supports PCIe stress tests for Speed change, link enable/disable, entry/exist for lower power states, …etc. 

Cadence PCIe 4.0 Software Development Kit

The “System Interop/Compliance/Debug platform” was set up to test with multiple endpoint and System platforms. This system come with integrated Cadence software for basic system debug without the need for analyzer to perform the analysis, such as LTSSM History, TS1/TS2 transmitted/received with time stamp, Link training phases, Capturing Packet errors details, Capturing PHY TX/RX internal state machine details, ...etc.

Cadence PCIe System Interop/Compliance/Debug Platform

The year 2019 is certainly a "fruitful year" for the PCIe as more Gen 4 products are now available in the market, Gen 5 v1.0 specification got officially ratified, and PCI-SIG's revealing of Gen 6 specification development. We were glad to be part of this APAC tour with the chance to further introduce Cadence’s complete and comprehensive PCIe IP solution.

See you all next year in APAC again!

More Information

For more information on Cadence's PCIe IP offerings, see our PCI Express page.

For more information on PCIe in general, and on the various PCI standards, see the PCI-SIG website.

Related Posts

• Blog: Did You “Stress Test” Yet? Essential Step to Ensure a Quality PCIe 4.0 Product
• Blog: PCIe Gen4: It’s Official, We’re Compliant
• Blog: PCIe 3.0 Still Shines While PCIe Keeps Evolving
• Blog: The PCIe 4.0 Era Continues at PCI-SIG Developers Conference 2016

Cadence continues to be a leader in SoC verification and has expanded our industry investment in Accellera portable stimulus language standardization. Some customers have expressed reservations that portable stimulus requires the effort of learn...(read more)

Hi All,

I'm trying to understand checkpoint concept. When I found save and restart concept in cdnshelp, There is just describing about "$save" and "xrun -r "~~~".

and I found also the below link about save restart and it saves your time.

But I can't find any benefits from my experiment from save&restart article( I fully agree..the article)

Ok, So I'v got some experiment  Here.

1. I declared $save and got the below result as I expected within the simple UVM code.

In UVM code...

$display("TEST1");
$display("TEST2");
$save("SAVE_TEST");
$display("TEST3");
$display("TEST4");

And I restart at "SAVE_TEST" point by xrun -r "SAVE_TEST", I've got the below log

xcelium> run
TEST3
TEST4

Ok, It's Good what I expected.(The concept of Save and Restore is simple: instead of re-initializing your simulation every time you want to run a test, only initialize it once. Then you can save the simulation as a “snapshot” and re-run it from that point to avoid hours of initialization times. It used to be inconvenient. I agree..)

2. But The Problem is that I can't restart with modified code. Let's see the below example.

I just modified TEST5 instead of "TEST3"

$display("TEST1");
$display("TEST2");
$save("SAVE_TEST");
$display("TEST5"); //$display("TEST3");
$display("TEST4");

and I rerun with xrun -r "SAVE_TEST", then I've got the same log

xcelium> run
TEST3
TEST4

There is no "TEST5". Actually I expected "TEST5" in the log.From here We know $save can't support partially modified code after $save. 

Actually, through this, we can approach to our goal about saving developing time. 

So I want to know Is there any possible way that instead of re-initializing our simulation every time we want to run a test, only initialize it once and keep developing(debugging) our code ?

If we do, Could you let me know the simple example?

Hi all,

I need to develop a digital design/verification solution to compile,elaborate and simulate SV designs (basically a complex xrun wrapper). I am an experienced user of xrun and I have done a number of these wrappers over the years but this one is to be more of a tool, intented to be used Company-wise, so it needs to be very well thought and engineered.

It needs to be robust, simple and extensible. It needs to support multi-snapshot elaboration, run regressions on machine farms, collect coverage, create reports, etc.

I've been browsing the vast amount of documentation on XCELIUM and, although very good, I can't find any document which puts together all the pieces of what I am trying to achieve. I suppose I am more clear on the elaboration, compilation and simulation part but I am really lacking on the other areas like : LSF, regressions coverage, where does vManager fits in all this, etc.

I'd appreciate if someone can comment on whether there is a document which depicts how such a DV flow can be put together from scratch, or whether there is a kind of RAK with some example xrun wrapper.

Thanks

Since the release of the Automated Device Placement and Routing solution last year, we have continued to improve and build upon it. In this blog, I’ll talk about the latest addition—the Auto Device Array form—how this is an integral piece of the new Automated Device Placement and Routing solution.(read more)

•An in silico clinical trial is underway with the 3DEXPERIENCE platform to evaluate the Living Heart simulated 3D heart for transforming how new devices can be tested •Five-year extension of their collaborative research agreement aims to spur medical device innovation by enabling innovative, new product designs •Both Dassault Systèmes and the FDA recognize the transformative impact of modeling and simulation on public health and patient safety

•Customers can seamlessly extend their design to manufacturing ecosystem to the cloud with the integrated 3DEXPERIENCE.WORKS portfolio, enabling new levels of functionality, collaboration, agility and operational efficiency •Latest release of 3D design and engineering portfolio features hundreds of enhancements, new capabilities and workflows to accelerate and improve product development •Over six million SOLIDWORKS users can innovate products faster with better performance and streamlined...

•Fifteen new disruptive projects and startups from Belgium, China, France, India, South Africa and the U.S. join the 3DEXPERIENCE Lab accelerator program •New incubator and fab lab partners including Centech in Canada and OuiCrea in China will empower early stage projects from the outset •Since 2015, the 3DEXPERIENCE Lab has evaluated nearly 500 projects and grown its network of mentors to 1,200