Washington — “It is past time for regulators to fully recognize the hazards presented by reactive chemicals,” Katherine Lemos, chair and CEO of the Chemical Safety Board, says in a new video in which the agency calls on OSHA and the Environmental Protection Agency to strengthen their standards on these substances.

Allagash Brewing Company reports that it has experienced a more than 40% reduction in unplanned work orders since implementing Limble, a CMMS and asset management platform, across its maintenance organization.

Statistical Process Control (SPC) is evolving to not just detect defects, but also to predict and prevent issues. Modern factories use more sensors and collect more data, allowing SPC to analyze real-time patterns and forecast potential issues.

Eberhard Wolff talks with Jürgen Höller about Reactive Spring. Reactive programming is a hot topic, but adoption has been slow in the enterprise. Spring 5 incorporates Reactor and the RxJava API to help Java developers build scalable high-performance web applications. The discussion explores architectural challenges, transactions, porting existing applications, and increased code complexity.

To be honest, transmission and distribution networks are full of problems. But that’s nothing new, and you already knew that. This technical article will shed some light on solving some pretty severe problems in transmission and distribution networks by using... Read more

The post Controlling power system parameters through reactive power (VAr) compensation appeared first on EEP - Electrical Engineering Portal.

Most compensation banks are controlled stepwise. For this purpose it is essential to ‘know’ when it is allowed to (de)activate a capacitor step by the power factor relay (controller). The so-called C/k value is calculated by the step size C... Read more

The post How To Control Reactive Power In Larger Electrical Plants With Multiple Incomers appeared first on EEP - Electrical Engineering Portal.

When reactive power devices, whether capacitive or inductive, are purposefully added to a power network in order to produce a specific outcome, this is referred to as compensation. It’s as simple as that. This could involve greater transmission capacity, enhanced... Read more

The post Do you know what reactive power compensation is? If not, keep reading, it’s important. appeared first on EEP - Electrical Engineering Portal.

This article will shed some light on how adding capacitors gives the distribution system the necessary reactive power to return the power factor to the required level. Capacitors act as a source of reactive energy, which accordingly reduces the reactive... Read more

The post A few practical ways to determine required reactive energy compensation for a power system appeared first on EEP - Electrical Engineering Portal.

Reactive energy compensation is an essential process in improving energy efficiency. It reduces the power consumption and thus its cost, enables optimum use of installations by preventing them being oversized, and more generally it improves the quality of energy systems.... Read more

The post The theory behind reactive energy compensation that every engineer should know appeared first on EEP - Electrical Engineering Portal.

Why reactive power and power factor correction are so important? Well, for experienced engineers, this is not the question but the fact. For young students who meet this matter and terms for the first time, it’s important to explain the... Read more

The post Reactive power and power factor correction essentials to ALWAYS keep on mind appeared first on EEP - Electrical Engineering Portal.

In the world of power systems, synchronization and reactive power control are crucial to maintaining stability, efficiency, and reliability. Synchronizing various power sources, such as generators and grids, ensures they operate in harmony to meet the demand and support the... Read more

The post Synchronization and Reactive Power Control in Power System appeared first on EEP - Electrical Engineering Portal.

They might also be used as highly-sensitive sensors and even as integrated light sources.

Location: Engineering Library- QA76.73.J39M36 2015

Philip L. Ross
Dec 1, 2004; 3:1154-1169
Research

Jennifer L. Zamanian
May 2, 2012; 32:6391-6410
Neurobiology of Disease

Creactive Design uses 3D CAD software to design products for global brands like Black & Decker, Fujitsu, Nokia, and Pfizer

Peter Bregman, author of "Four Seconds," on changing the way you lead.

Handling user input with forms is the cornerstone of many common applications.

Applications use forms to enable users to log in, to update a profile, to enter sensitive information, and to perform many other data-entry tasks

The invention relates to the use of a conjugated seed oil modified with an activated vinyl monomer via a Deils-Alder reaction to generate a modified reactive diluent used to enhance the physical properties of coating systems. In one embodiment, a reactive diluent containing tung oil modified by the addition of an acrylate monomer is mixed with an auto-oxidative alkyd, a metal drier package, and a wetting agent to achieve cross-linked films exhibiting improved tensile strength, tensile modulus, cross-link density, and glass transition temperature, among other physical parameters.

Non-ionic water-soluble cellulose ethers modified with 3-azido-2-hydroxypropyl groups bound via an ether link are provided having a molar degree of substitution MSAHP in the range from 0.001 to 0.50. Exemplary cellulose ethers are alkyl celluloses, including methyl, hydroxyalkyl (e.g. hydroxyethyl or hydroxypropyl) or alkylhydroxyalkyl cellulose (e.g. methylhydroxyethyl). Reaction products with alkyne compounds are also provided, resulting in a terminal alkyne group. The reaction of azide with the alkyne proceeds as a 1,3-dipolar cycloaddition reaction, advantageously with Cu(I) or ruthenium catalysts. A multiplicity of cellulose ethers can be obtained from the conversion reaction. Variations in the macroscopic properties can be achieved by controlled modification, ranging from increased or reduced viscosity. The reaction, taking place within a few seconds, requires only minimal catalyst. Gel formation is reversible by adjustment of the pH such that a monophasic system (high-viscous fluid) arises again from a biphasic system (gel+low-viscous water phase).

A description is given of a photoreactive polymer preparable by radical polymerization using at least one photoreactive monomer, where the photoreactive monomer has at least one radically polymerizable C—C double bond, at least one hydrophilic group selected from an ethylene glycol group and polyethylene glycol groups having at least 2 ethylene glycol units, and at least one photoreactive group, the photoreactive group being a photoenolizable carbonyl group.

The present invention provides stable aqueous thermosetting binder compositions having a total solids content of 15 wt. % or higher, preferably, 20 wt. % or higher, and having extended shelf life comprising one or more reducing sugar, one or more primary amine compound, and one or more stabilizer acid or salt having a pKa of 8.5 or less. The total amount of stabilizer used may range from 5 to 200 mole %, based on the total moles of primary amine present in the binder. The stabilizer may be an organic stabilizer chosen from a monocarboxylic acid, a dicarboxylic acid, a fatty acid, an acid functional fatty acid ester, an acid functional fatty acid ether, or an inorganic stabilizer chosen from a mineral acid, a mineral acid amine or ammonia salt, and a Lewis acid, and mixtures thereof. The compositions can be used to provide binders for substrate materials including, for example, glass fiber.

The present disclosure provides a photoreactive synthetic regulator of protein function. The present disclosure further provides a light-regulated polypeptide that includes a subject synthetic regulator. Also provided are cells and membranes comprising a subject light-regulated polypeptide. The present disclosure further provides methods of modulating protein function, involving use of light.

The present disclosure generally relates to a HAMR head and a method for fabrication thereof. The HAMR head has a write head with a waveguide extending therethrough. A laser diode is coupled to a submount that is bonded to the write head using an adhesion layer, a solder structure, and a self-propagating multilayer alloying stack.

A method for producing highly reactive olefin polymers wherein at least 50 mol. % of the polymer chains have terminal double bonds, and a novel polymerization initiating system for accomplishing same.

An electronic component comprising a half bridge adapted for operation with an electrical load having an operating frequency is described. The half bridge comprises a first switch and a second switch each having a switching frequency, the first switch and the second switch each including a first terminal, a second terminal, and a control terminal, wherein the first terminal of the first switch and the second terminal of the second switch are both electrically connected to a node. The electronic component further includes a filter having a 3 dB roll-off frequency, the 3 dB roll-off frequency being less than the switching frequency of the switches but greater than the operating frequency of the electrical load. The first terminal of the filter is electrically coupled to the node, and the 3 dB roll-off frequency of the filter is greater than 5 kHz.

A reactive sputtering apparatus includes a chamber, a substrate holder provided in the chamber, a target holder which is provided in the chamber and configured to hold a target, a deposition shield plate which is provided in the chamber so as to form a sputtering space between the target holder and the substrate holder, and prevents a sputter particle from adhering to an inner wall of the chamber, a reactive gas introduction pipe configured to introduce a reactive gas into the sputtering space, an inert gas introduction port which introduces an inert gas into a space that falls outside the sputtering space and within the chamber, and a shielding member which prevents a sputter particle from the target mounted on the target holder from adhering to an introduction port of the reactive gas introduction pipe upon sputtering.

A container storing an anesthetic is disclosed. The container is sealed by a closure and stores a liquid anesthetic solution. The anesthetic is from 0.1% to 10% by weight of the liquid anesthetic solution. The container is made of a material that is inert to the anesthetic and the closure is made of siliconized rubber or a metal. A concentration of the anesthetic in a liquid anesthetic solution stored in the container following a predetermined time period is at least 93% of a concentration of the anesthetic in a liquid anesthetic solution before the liquid anesthetic solution is stored in the container.

A method for creating laboratory-scale reactive distillation apparatus from provided modular components is described. At least two types of modular distillation column stages are provided. A first type of modular stage comprises two physical interfaces for connection with a respective physical interface of another modular stage. A second type modular stage comprises one such physical interface. At least one type of tray is provided for insertion into the first type of modular stage. A clamping arrangement is provided for joining together two modular stages at their respective physical interfaces for connection to form a joint. The invention provides for at least three modular stages can be joined. At least one sensor or sensor array can be inserted into each modular stage. At least one controllable element can be inserted into each modular stage. The invention provides for study of traditional, advanced, and photochemical types of reactive distillation.

A breaching device that may be used to create a linear and, if desired, continuous, cut or breach in a metal structure. The cut or breach created may be non-linear in shape and not deviate from the functionality of the device. The device includes a plurality of containers joined together, such as by a metal wire or the like to form a series of cutting charges. One or more of the containers includes Reactive Material (RM) that may be ignited electronically or some other activation mechanism. The containers that do contain RM are sealed with the RM therein and preferably fabricated to be sufficiently heat resistant so that the RM is only ignited intentionally. The RM that is contained in the containers may be fired simultaneously, sequentially or in a programmed pattern, depending on the requirements of the application.

A munition is described including a reactive fragment having an energetic material dispersed in a metallic binder material. A method is also described including forming a energetic material; combining the energetic material with a metallic binder material to form a mixture; and shaping the mixture to form a reactive fragment. The munition may be in the form of a warhead, and the reactive fragment may be contained within a casing of the warhead.

An adhesive may bond a plastic bonded explosive to a metal surface. The adhesive may include a mixture of hydroxyl-terminated polybutadiene (HTPB) and isophorone di-isocyanate (IPDI) in a weight ratio in the range of about 5 to 1 to about 10 to 1. The adhesive may include a solvent and/or a catalyst.

A solids circulation system receives a gas stream containing char or other reacting solids from a first reactor. The solids circulation system includes a cyclone configured to receive the gas stream from the first reactor, a dipleg from the cyclone to a second reactor, and a riser from the second reactor which merges with the gas stream received by the cyclone. The second reactor has a dense fluid bed and converts the received materials to gaseous products. A conveying fluid transports a portion of the bed media from the second reactor through the riser to mix with the gas stream prior to cyclone entry. The bed media helps manipulate the solids that is received by the cyclone to facilitate flow of solids down the dipleg into the second reactor. The second reactor provides additional residence time, mixing and gas-solid contact for efficient conversion of char or reacting solids.

The invention concerns soluble and antigenic HTLV p24 variants that can be fused to chaperones and their use in diagnostic applications such as immunoassays for detecting antibodies against HTLV-I or HTLV-II in an isolated biological sample. In particular, the invention relates to a soluble HTLV-I or HTLV-II p24 antigen comprising either the N- or the C-terminal domain of p24 and lacking the other domain. Moreover, the invention covers recombinant DNA molecules encoding these HTLV-I and -II fusion antigens as well as their recombinant production using expression vectors and host cells transformed with such expression vectors. In addition, the invention focuses on compositions of these HTLV p24 antigens with HTLV gp21 antigen and on an immunoassay method for detection of HTLV antibodies using the antigens of the invention. Also the use of HTLV p24 antigens in an in vitro diagnostic assay as well as a reagent kit for detection of anti-HTLV-antibodies comprising said HTLV antigens is encompassed.

The present invention relates to an optical clear resin and a method for producing a liquid optical clear photo-curable adhesive.

The plasmas of diabetic or uremic patients and of those receiving peritoneal dialysis treatment have increased levels of the glucose-derived dicarbonyl metabolites like methylglyoxal (MGO), glyoxal (GO), and 3-deoxyglucosone (3-DG). The elevated dicarbonyl levels can contribute to the development of painful neuropathies. Here, we used stimulated immunoreactive Calcitonin Gene–Related Peptide (iCGRP) release as a measure of nociceptor activation, and we found that each dicarbonyl metabolite induces a concentration-, TRPA1-, and Ca2+-dependent iCGRP release. MGO, GO, and 3-DG were about equally potent in the millimolar range. We hypothesized that another dicarbonyl, 3,4-dideoxyglucosone-3-ene (3,4-DGE), which is present in peritoneal dialysis (PD) solutions after heat sterilization, activates nociceptors. We also showed that at body temperatures 3,4-DGE is formed from 3-DG and that concentrations of 3,4-DGE in the micromolar range effectively induced iCGRP release from isolated murine skin. In a novel preparation of the isolated parietal peritoneum PD fluid or 3,4-DGE alone, at concentrations found in PD solutions, stimulated iCGRP release. We also tested whether inflammatory tissue conditions synergize with dicarbonyls to induce iCGRP release from isolated skin. Application of MGO together with bradykinin or prostaglandin E2 resulted in an overadditive effect on iCGRP release, whereas MGO applied at a pH of 5.2 resulted in reduced release, probably due to an MGO-mediated inhibition of transient receptor potential (TRP) V1 receptors. These results indicate that several reactive dicarbonyls activate nociceptors and potentiate inflammatory mediators. Our findings underline the roles of dicarbonyls and TRPA1 receptors in causing pain during diabetes or renal disease.

Philip L. Ross
Dec 1, 2004; 3:1154-1169
Research

The plasmas of diabetic or uremic patients and of those receiving peritoneal dialysis treatment have increased levels of the glucose-derived dicarbonyl metabolites like methylglyoxal (MGO), glyoxal (GO), and 3-deoxyglucosone (3-DG). The elevated dicarbonyl levels can contribute to the development of painful neuropathies. Here, we used stimulated immunoreactive Calcitonin Gene–Related Peptide (iCGRP) release as a measure of nociceptor activation, and we found that each dicarbonyl metabolite induces a concentration-, TRPA1-, and Ca2+-dependent iCGRP release. MGO, GO, and 3-DG were about equally potent in the millimolar range. We hypothesized that another dicarbonyl, 3,4-dideoxyglucosone-3-ene (3,4-DGE), which is present in peritoneal dialysis (PD) solutions after heat sterilization, activates nociceptors. We also showed that at body temperatures 3,4-DGE is formed from 3-DG and that concentrations of 3,4-DGE in the micromolar range effectively induced iCGRP release from isolated murine skin. In a novel preparation of the isolated parietal peritoneum PD fluid or 3,4-DGE alone, at concentrations found in PD solutions, stimulated iCGRP release. We also tested whether inflammatory tissue conditions synergize with dicarbonyls to induce iCGRP release from isolated skin. Application of MGO together with bradykinin or prostaglandin E2 resulted in an overadditive effect on iCGRP release, whereas MGO applied at a pH of 5.2 resulted in reduced release, probably due to an MGO-mediated inhibition of transient receptor potential (TRP) V1 receptors. These results indicate that several reactive dicarbonyls activate nociceptors and potentiate inflammatory mediators. Our findings underline the roles of dicarbonyls and TRPA1 receptors in causing pain during diabetes or renal disease.

Katalin Susztak
Jan 1, 2006; 55:225-233
Complications

Dilys J. Freeman
May 1, 2002; 51:1596-1600
Complications

T Inoguchi
Nov 1, 2000; 49:1939-1945
Articles