Projections of Alaska timber products output, the derived demand for logs and chips, and timber harvest by owner are developed by using a trend-based analysis.

A survey determined that installed dry kiln capacity in Alaska more than doubled to an estimated 220 thousand board feet (mbf) within 4 years (2000-2004). This increased ability to produce dry lumber and value-added products resulted from industry efforts to obtain federal funding to support a dry kiln grant program. This report reviews grantees' progress in implementing grantsupported projects and their impact on the production capabilities of the Alaska lumber drying industry. Data were collected in early 2005 by using a standard set of questions asked of 19 dry kiln owners. Much of the growth in drying and value-added processing capacity has been concentrated in southeast Alaska where there has been the greatest dry kiln investment. During 2004, the estimated volume of lumber dried in Alaska was 813 mbf, whereas potential annual capacity was estimated to be almost 6,600 mbf. This indicates that Alaska producers are drying just over 12 percent of their potential capacity. Factors that will increase the future production of value-added forest products in Alaska include a continuing supply of economically priced timber, the ability of the industry to support a reasonably priced grading service, and the ability of producers to move value-added products to domestic and export markets.

The condition of aquatic habitat and the health of aquatic species, particularly salmon, are a significant concern in the Pacific Northwest. Land management agencies use fish and riparian guidelines intended to maintain or improve aquatic habitat.

The kitchen cabinet industry has shown significant growth recently, with expanding residential markets, new cabinet styles, and larger kitchens. This industry represents an opportunity for small Alaska wood producers to create high-value secondary products. In response to recent trends in kitchen cabinet manufacturing and the need to identify opportunities for underutilized species, the Alaska Wood Utilization Research and Development Center has conducted numerous studies evaluating consumer preferences for Alaska's primary hardwoods-Alaska birch (Betula papyrifera var. humilis )Reg.) Fern & Raup) and red alder (Alnus rubra Bong.). These studies explored consumer preferences under a range of marketing parameters, cabinet appearances, and regional market locations. This paper summarizes these studies and offers insights into the potential market for Alaska's hardwoods as secondary wood products such as kitchen cabinets.

This report examines the growth and development of the tourism industry in Hoonah, Alaska, and its effects on community life and resource use. The report describes the gradual development of tourism in Hoonah and presents resident perceptions of tourism's effect on the natural and social environment. A multisited ethnographic approach was used featuring indepth, open-ended interviews with local residents, tourism providers, business owners, and government officials. Data were analyzed using Ethnograph, a software program used to assist in coding data based on prominent themes. Results indicate that tourism has brought changes to the lives of Hoonah residents, particularly those relying on natural resources for everyday survival. Expansion of nature-based tourism in the area surrounding Hoonah resulted in conflicts between resource users. The growth of the charter fishing fleet led to competition with commercial fishers. Nature tour operators using remote recreation sites experienced conflicts with local hunters and fishers as well as other commercial guides. The development of a cruise ship destination on private land outside of Hoonah led to shifts in use of this historic site by local residents as well as in use of other private lands used for subsistence. Findings may enable Forest Service planners to identify factors involved in the relation between tourism growth and community well-being. It also may assist small southeast Alaska communities in decisionmaking related to tourism development.

The USDA Forest Service implemented the National Visitor Use Monitoring (NVUM) program across the entire National Forest System (NFS) in calendar year 2000. The primary objective of the NVUM program is to develop reliable estimates of recreation use on NFS lands via a nationally consistent, statistically valid sampling approach. Secondary objectives of NVUM are to characterize recreation visits, collect data in support of regional economic analyses, and gauge national forest visitor satisfaction. We document and review the round 1 NVUM implementation in the USDA Forest Service Alaska Region (R-10) with examination of the R-10 prework, sample day implementation, survey completion rates, sampling at cabins, boat docks, and air carriers; and the NVUM expansion weights assigned to survey cases. Several opportunities to improve the implementation of the standard NVUM protocols in R-10 are identified.

This publication provides estimates of total softwood harvest by owner for Alaska for 1910-2006. This information is a mix of reported and estimated data. These data are being used to develop assumptions needed in forest planning by both public and private forest managers.

Wood has become an important energy alternative in Alaska, particularly in rural areas where liquid fuel costs can be substantial. In some cases, wood fuel is readily available to communities, increasing the attractiveness of wood energy. Wood energy systems in rural Alaska can also lead to employment gains as well as benefits to local cash economies. Many Alaska villages are now considering wood as a fuel source for community heating, several have completed feasibility studies, and others are moving forward with design and construction activities. Cordwood is readily available in many regions of Alaska, although not always in commercial quantities. However, for many small-scale applications, efficient cordwood systems could be a viable energy option. In this paper, we provide a qualitative review of factors such as wood fuel availability, cordwood system size, wood fuel cost, wood quality, labor, fuel drying, and underground piping. Other general observations are noted, based on case studies of operating cordwood systems in Alaska.

Many stands in southeast Alaska harvested since 1950, especially where there has been a high degree of disturbance of mineral soil, have regenerated to red alder (Alnus rubra Bong.) and are now approaching maturity. The availability of red alder raises questions addressed in this study about the recovery of lumber from this resource. Information in this study was obtained from trees estimated to be 46 years old on a site outside of Ketchikan. Rates of recovery using a thin-kerf portable band mill were higher than those reported by larger production mills in Washington and Oregon. Grade yields of the Alaska material are comparable to those attained in other regions. This study determined that there were no significant differences in material characteristics that would set this Alaska log resource apart from red alder in the other regions of North America. The potential value of the products is sufficient to allow production in Alaska for use in the manufacturing of value-added products within the state or shipment of finished lumber to domestic or export markets.

Based on an in-grade testing program, the Ketchikan Wood Technology Center has registered three proprietary grademarks for Alaska species of hemlock (Tsuga heteraphylla (Raf.) Sarg.), yellow-cedar (Chamaecyparis nootkatensis (D. Don) Spach), and spruce (combined Sitka spruce [Picea sitchensis (Bong.) Carr.] and white spruce [Picea glauca (Moench) Voss]). The Ketchikan Wood Technology Center conducted tests to establish glulam beam manufacturing specifications. In conjunction with this program, there is a need to measure the market for glulam beams in Alaska. The purpose of this research was to compare Alaska residential builder adoption rates of glulam beams and other engineered wood products to those of the continental United States. The results showed that a higher percentage of Alaska builders use glulam beams compared with builders in the rest of the United States.

Population growth in Oregon, Washington, and Alaska is expected to increase demand for outdoor recreation on public land. This trend will be tempered by changes in the sociodemographic composition of the population. Among sociodemographic characteristics, different ages and incomes correspond to different participation rates. Although older Americans are participating more, participation is still lower among this group for active pursuits. Hence, as the population ages, demand for passive activities may increase. Low-income people participate at a much lower rate than higher income people in outdoor recreation, and the growing disparity between the wealthy and poor may create inequities in opportunities for participation. State recreation planning documents for Oregon, Washington, and Alaska have identified this issue as a significant concern for recreation providers. Another important factor in recreation trends in the region is ethnicity: different ethnic groups participate in outdoor recreation at different rates, exhibit some different preferences for specific activities, and use recreation sites in different ways. In Alaska, the number of Asian/Pacific Islanders is expected to quadruple by 2025; in Oregon, the Hispanic population may triple by 2025; and in Washington, both these segments of the population may double.

The Cooperative Alaska Forest Inventory (CAFI) is a comprehensive database of boreal forest conditions and dynamics in Alaska. The CAFI consists of fieldgathered information from numerous permanent sample plots distributed across interior and south-central Alaska including the Kenai Peninsula. The CAFI currently has 570 permanent sample plots on 190 sites representing a wide variety of growing conditions. New plots are being added to the inventory annually. To date, over 60 percent of the permanent sample plots have been remeasured and approximately 20 percent have been remeasured three times. Repeated periodic inventories on CAFI permanent sample plots provide valuable long-term information for modeling of forest dynamics such as growth and yield. Periodic remeasurements can also be used to test and monitor large-scale environmental and climate change.

This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products.

This paper analyzes patterns of forest products trade between Asia and Alaska.

Aerial counts, in-person interviews, and mail-in questionnaires were used to survey sport fish use during the coho salmon (Oncorhynchus kisutch Walbaum) season on the Copper River Delta, Alaska from 2002 through 2006. Angler counts provided an index of use on individual streams and were used to develop a spatial database exhibiting patterns of use. In-person interviews and mail-in questionnaires were used to determine the effort, catch, and harvest of coho salmon by both local residents of Cordova and nonresident anglers.

This study considered three aspects of residential wood energy use in Alaska: current conditions and fuel consumption, knowledge and attitudes, and future use and conditions. We found that heating oil was the primary fuel for home heating in southeast and interior Alaska, whereas natural gas was used most often in south-central Alaska (Anchorage). Firewood heating played a much more important role as a secondary (vs. primary) heating source in all regions of Alaska. In interior Alaska, there was a somewhat greater interest in the use of wood energy compared to other regions. Likewise, consumption of fossil fuels was considerably greater in interior Alaska.

This study's objective was to document and describe the current seedling bank of Sitka spruce (Picea sitchensis (Bong.) Carr.) and western hemlock (Tsuga heterophylla (Raf.) Sarg.) stands in southeast Alaska that were partially cut between 1900 and 1984.

This report highlights key findings from the most recent (2004–2008) data collected by the Forest Inventory and Analysis program across all ownerships in southeast and south-central Alaska. We present basic resource information such as forest area, ownership, volume, biomass, carbon sequestration, growth, and mortality; structure and function topics such as vegetation and lichen diversity and forest age distribution; disturbance topics such as insects and diseases, yellow-cedar decline, fire, and invasive plants; and information about the forest products industry in Alaska, the potential of young growth for timber supply, biofuels, and nontimber forest products. The appendixes describe inventory methods and design in detail and provide summary tables of data and statistical error for the forest characteristics sampled.

The Environmental Protection Agency (EPA) has formally declared that greenhouse gases (GHG) pose a threat to public health and the environment. This is significant because it gives the executive branch the authority to impose carbon regulations on carbon-emitting entities. United States GHG emissions have increased by approximately 17 percent between 1990 and 2007, and the EPA now has the authority to design regulation to reverse this trend.

Traditionally, there has been a strong forest products trade between Alaska and Asia. This trade relationship has developed owing to Alaska's proximity to Asia and, in the past, an abundance of high-quality timber. Although forest products markets in North America remain soft, markets in Asia are growing. However, to benefit from Asia's growing forest products market, it is important to understand the concepts of global shipping including containerization, intermodal transport, non vessel operating common carriers, and freight forwarders. One key development that could have a major impact on Alaska's forest products trade is the opening of the Port of Prince Rupert (British Columbia) in 2007. The Port of Prince Rupert ships lumber, logs, and wood pellets to Asia and is much closer to southeast Alaska than are the ports of Seattle and Tacoma. The Prince Rupert port is also 1 day closer to Asia. Despite Prince Rupert's proximity to Alaska, however, there is still no regularly scheduled barge service between the Port of Prince Rupert and southeast Alaska. Potential connections that may develop are examined in this paper. This paper also examines the changing concepts of global shipping and how they affect Alaska's forest products industry.

This report documents the results from the first “5-year” round of understory responses to the Tongass-Wide Young-Growth Studies (TWYGS) treatments, especially in relation to their effects on food resources for black-tailed deer (Odocoileus hemionus sitkensis). Responses of understory vegetation to precommercial silviculture experiments after their first 4 to 8 years posttreatment were analyzed with the Forage Resource Evaluation System for Habitat (FRESH)-Deer model. The studies were conducted in western hemlock (Tsuga heterophylla)-Sitka spruce (Picea sitchensis) young-growth forests in southeast Alaska. All four TWYGS experiments were studied: (I) planting of red alder (Alnus rubra) within 1- to 5-year-old stands; (II) precommercial thinning at narrow and wide spacings (549 and 331 trees per hectare, respectively) in 15- to 25-year-old stands; (III) precommercial thinning at medium spacing (420 trees per hectare) with and without pruning in 25- to 35-yearold stands; and (IV) precommercial thinning at wide spacing (203 trees per hectare) with and without slash treatment versus thinning by girdling in >35-year-old stands. All experiments also included untreated control stands of identical age. FRESHDeer was used to evaluate the implications for deer habitat in terms of forage resources (species-specific biomass, digestible protein, and digestible dry matter) relative to deer metabolic requirements in summer (at two levels of requirements—maintenance only vs. lactation) and in winter (at six levels of snow depth).

The U.S. Forest Service's Pacific Northwest Research Station today released a new report that outlines a climate adaptation strategy for yellow-cedar in Alaska.

Stem decays of living trees, known also as heart rots, are essential elements of wildlife habitat, especially for cavity-nesting birds and mammals. Stem decays are common features of old-growth forests of coastal Alaska, but are generally absent in young, managed forests. We offer several strategies for maintaining or restoring fungal stem decay in these managed forests that can be used to enhance specific types of wildlife habitat.

This report traces the flow of timber harvested in Alaska during calendar year 2011, describes the composition and operations of the state’s primary forest products industry, and quantifies volumes and uses of wood fiber.

A conservation and management strategy for yellow-cedar in Alaska is presented in the context of climate change.

Sitka, Alaska, has substantial hydroelectric resources, limited driving distances, and a conservation-minded community, all suggesting strong opportunities for achieving a low community carbon footprint.

If you’re a local businessperson, an entrepreneur, a tribal partner, a community organizer; a decision-maker for a school district, college, or hospital; a government leader; a project developer; an industry leader; or an equipment manufacturer, the Alaska Community Handbook will be helpful to you.

Over the past decade, wood-energy use in Alaska has grown dramatically.

Over the past decade, the use of wood for thermal energy in Alaska has grown significantly. Since 2000, nearly 30 new thermal wood-energy installations in Alaska have been established.

Efforts to amend the Tongass National Forest Land Management Plan have necessitated the development of several management scenarios to assist with planning efforts.

This book is intended to help people better understand how wood energy is helping to revitalize rural Alaskan communities by reducing energy costs, creating jobs, and helping to educate the next generation.

Southeast Alaska is a remote area, located approximately 700 miles north of Seattle, Washington. Most of the region’s goods are imported by barge, creating logistical and economic challenges not faced by many other parts of the United States. In this context, we used life cycle assessment (LCA) to evaluate the potential environmental impact on global warming potential (GWP) of converting home heating systems from heating oil to wood pellets in southeast Alaska. Once the current level (status quo) was established, we evaluated imported pellet utilization at 20-, 40- and 100-percent penetration into the residential heating oil markets. We also modeled local production of wood pellets in southeast Alaska, assuming a 20-percent penetration. Our research found that reductions in GWP resulting from the conversion to wood pellets ranged from 10 to 51 percent, with the greatest reductions being associated with the highest levels of imported pellets. The scenario of producing wood pellets in southeast Alaska to meet local needs had a reduction in GWP of 14 percent (versus the status quo).

This research models a wood pellet heating system at the Tlingit-Haida Regional Housing Authority in Juneau, Alaska, used to provide thermal energy to a 929-m2 warehouse, as an alternative to a heating system that burns more costly fossil fuels. Research objectives were to evaluate project economics of the pellet system and to conduct cost:benefit analysis on key variables (initial capital cost, fuel oil cost, and wood pellet cost). Economic results of interest included net present value, payback, internal rate of return, and cost:benefit ratio. Monte Carlo simulations were conducted using RETScreen software with the parameters of heating oil cost, wood pellet cost, fuel price escalation, and heating load. Cost:benefit analysis was conducted for capital cost versus wood fuel cost and also versus alternative fuel cost. This research found that economic performance was favorable over a wide range of normal operating conditions, even when paying a relatively high price for wood fuel. A pellet production facility in southeast Alaska could lead to lower wood fuel costs and even more favorable regional economics.

Coal is the primary fuel source for electrical power generation in interior Alaska, with more than 600,000 tons burned annually at five different power plants. Woody biomass could be used as part of this fuel mix, offering potential environmental and economic benefits. In this research, debarked chips were cofired with locally mined coal at the Aurora Power Plant facility in downtown Fairbanks, Alaska. During two days of testing, aspen chips were successfully cofired with coal at average rates of 2.4 percent and 4.8 percent of total energy value. Combustion gases were analyzed during combustion of 100- percent coal, as well as at two different blends with aspen chips, for levels of carbon dioxide, carbon monoxide, oxygen, and nitrogen compounds. Carbon monoxide was suggested as the combustion gas most influenced by changes in woody biomass blend rate. The potential logistic and operational challenges when cofiring were also observed. Cofiring biomass at low levels in grate-combustion systems could be performed with relative ease, with only minor impacts on plant operations, including fuel storage, handling, and performance.

Six of nine nonnative boreal conifers in three genera (Abies, Larix, and Pinus) regenerated in 11 to 31 years after they were introduced to mainland Alaska. Lodgepole pine (Pinus contorta var. latifolia Engel.) and the Siberian larches (Larix sibirica Ledeb. and L. sukaczewii N. Dyl.) were the most widely introduced species and will likely be the first nonnative conifers to naturalize. Siberian larch grew up to six times more stem volume than white spruce in the first 40 years on upland sites, but was susceptible to the larch sawfly and a blue stain pathogen carried by bark beetles. On productive sites, lodgepole pine appeared to grow more stem wood than white spruce for about 35 years after planting. Snowshoe hares and moose were the most serious pests of the nonnative conifers. Balsam fir (Abies balsamea (L.) Mill.) was the only species to regenerate in an established moss understory. Growth and age relationships were negative for all adequately sampled nonnative conifers and positive for native white spruce (Picea glauca (Moench) Voss). Data were insufficient to assess niche availability for commercial-use of productive nonnative conifers in mixed stands in Alaska. Survey results indicate that introduction and naturalization of noninvasive tree species may improve the diversity, stability, and productivity of managed forest ecosystems.

Another AM station is proposing to run testing of all-digital broadcasting, with BRIAN R. WALSH filing an STA request to operate Oldies WIOE-A/FORT WAYNE in full-time HD RADIO MA3 mode with … more

For Keagan Johnson and his family, the decision to play football at the University of Iowa was theirs. A personal decision that set a course for a fairly massive three or four or five years. When...

CEDAR RAPIDS
Sally Stejskal, 78, died Thursday, May 7, 2020. Brosh Chapel and The Avacentre, Cedar Rapids.

Summer is in full swing here in the states! It’s a perfect time to grab your skateboard and go cruising. Today we’re going to learn how to design flat skateboards and colorful vector longboards in Adobe Illustrator! We’ll be working with Clipping Masks, Stroke, and Pathfinder panel. Let’s get started! Tutorial Details Program: Adobe Illustrator CC Difficulty: […]

The post 10 Step Tutorial: How to Design Flat Skateboards Using Adobe Illustrator appeared first on Vectips.

For this years fishing trip to Alaska, I opted to upgrade my GoPro to a Panasonic GH-5 with Leica 12-60mm lense package at the local Best Buy. This would then accompany the Mavic drone footage. We had a couple sunny days for flying the drone, but really surprised how good the GH-5 footage turned out […]

The aim of this paper is to obtain a generalized CK-extension theorem in superspace for the bi-axial Dirac operator. In the classical commuting case, this result can be written as a power series of Bessel type of certain differential operators acting on a single initial function. In the superspace setting, novel structures appear in the cases of negative even superdimensions. In these cases, the CK-extension depends on two initial functions on which two power series of differential operators act. These series are not only of Bessel type but they give rise to an additional structure in terms of Appell polynomials. This pattern also is present in the structure of the Pizzetti formula, which describes integration over the supersphere in terms of differential operators. We make this relation explicit by studying the decomposition of the generalized CK-extension into plane waves integrated over the supersphere. Moreover, these results are applied to obtain a decomposition of the Cauchy kernel in superspace into monogenic plane waves, which shall be useful for inverting the super Radon transform.

A skateboard is provided having a transparent deck. First and second wheel assemblies are attached to the front and rear portion of the skateboard, respectively. The wheel assemblies each include a truck and two wheels. Each respective wheel comprises a wheel covering having a translucent surface and a wheel interior defined by a rotational axis and the wheel covering. The wheel interior houses a wheel generator configured to generate electricity and light emitting devices electrically coupled to the wheel generator that emit light when the wheel generator generates electricity. The skateboard also has a graphics layer on the top surface of the deck that is illuminated by the light emitting devices. The graphics layer comprises an adhesive surface having a graphic printed thereon and an adhesive applied thereon. The adhesive surface is adhesively affixed to the top or bottom surface of the transparent or translucent plastic deck.

An ice skate blade guard comprises a device for limiting/preventing falls and injury on the ice when skate blade guards are inadvertently left on when the skater enters the ice. At least one longitudinally-extending bar, blade, or other member provided on the bottom of the guard is sufficiently narrow, sharp, and/or with sharp or biting side edge(s) to bite-into the ice, upon incipient sideways movement, due to the member(s) being biased against the ice and/or due to weight of the wearer. The member(s) prevent sideways slipping, but allow forward movement. The slip-prevention member(s) may be movable in/on the guard and biased downward relative to the main body. In some versions, the slip-prevention blade(s) are fixed to the guard, rigidly and non-movably protruding from the bottom of the guard.

A skate blade dryer is provided for removing moisture from a skate blade after use to prevent rust, discoloration, pitting, and premature dulling of the skate blade. The dryer includes a housing having an interior, a top, and a front face. A blower is positioned in the interior of the housing. A conduit extends from the housing. The conduit includes a slot configured for receiving a skate blade coupled to a skate boot. The blower has an output port in fluid communication with the conduit for directing air flow through the conduit.

A skate squaring device includes a main frame having a slot to receive a skate blade. The main frame is designed to attach to a portion of a skate sharpening fixture such that calibration lines on the main frame are perpendicular to a centerline axis of a body of the skate blade when mounted in the holder. A magnetic angle is attached to the end of the skate blade and positioned adjacent a face of the main frame having the calibration lines to determine if the skate blade edge is square.

A hand ice skating mechanism in conjunction with an athletic protective mechanism utilizing a glove portion including a front portion and a rear portion, wherein the rear portion includes a blade retaining portion and a blade assembly in communication with the blade retaining portion.

Lumote is a dreamy puzzle platforming game created by the tiny team of Luminawesome. Composer and sound designer Paul Ruskay describes it as "a science fair project" because they designed a completely new way of generating the graphics with a program that's normally used to place the music at the appropriate moment in a game. The art style is flowy, and as the little blobby Lumote moves through the world interacting with the various flowers and little "dumb-bats," or batteries, the whole environment feels like it's underwater. Paul used that as inspiration, as well as the way nature films are shot and edited to create his playful, ambient soundtrack. Paul says he was thrilled to have a chance to add music and sound design to the genre of puzzle platformers, including games he really admires, like Portal. He says working on this soundtrack felt like unexplored territory, as it did when he wrote the music for the iconic Homeworld series of games. Paul's soundtrack is available with the

As the COVID-19 pandemic began to pick up in Alaska, Dr. Anne Zink, the state's chief medical officer, faced a difficult choice. Should she continue in-person meetings and nightly briefings with Republican Gov. Mike Dunleavy? Or should she opt for a more socially distant form of engagement? Zink chose the latter, saying she wanted to model the behavior that she has been appealing to residents to follow. She now appears at Dunleavy's briefings by video. And over the past two months, she has become a trusted voice as she urges Alaskans to follow the strict social distancing and other public health guidelines adopted by the state administration — which doctors groups have credited with keeping the state's COVID-19 numbers among the lowest in the country. Zink, who has a Facebook fan club and a #ThinkLikeZink hashtag , isn't the only public health official to acquire a cultlike following during the pandemic: Dr. Anthony Fauci, the federal infectious disease expert, has inspired a Saturday

As the COVID-19 pandemic began to pick up in Alaska, Dr. Anne Zink, the state's chief medical officer, faced a difficult choice. Should she continue in-person meetings and nightly briefings with Republican Gov. Mike Dunleavy? Or should she opt for a more socially distant form of engagement? Zink chose the latter, saying she wanted to model the behavior that she has been appealing to residents to follow. She now appears at Dunleavy's briefings by video. And over the past two months, she has become a trusted voice as she urges Alaskans to follow the strict social distancing and other public health guidelines adopted by the state administration — which doctors groups have credited with keeping the state's COVID-19 numbers among the lowest in the country. Zink, who has a Facebook fan club and a #ThinkLikeZink hashtag , isn't the only public health official to acquire a cultlike following during the pandemic: Dr. Anthony Fauci, the federal infectious disease expert, has inspired a Saturday