A superconducting magnet coil system with high resistance to quench events includes a first coil portion (1) with a first superconducting material and a second coil portion (2) with a second superconducting material. The first superconducting material has a higher critical temperature than the second superconducting material. The first and the second coil portions are bridged by a common quench protection element (6) and together with the quench protection element form a first loop. The magnet coil system also includes a third coil portion (3) which is part of a second electrical loop with a second quench protection element (8, 8', 8″)as well as a heating element (9) which is supplied with a heating voltage in response to a quench of the third coil portion. Among the series connected coil portions (1, 2) only the second coil portion is in thermal contact with the first heating element (9).

Methods and systems for frequency-dependent fluid attenuation measurement are provided. In certain embodiments, the methods comprise: generating one or more reference acoustic signals within a reference fluid; receiving one or more reference acoustic signal reflections; determining a frequency-dependent response function based, at least in part, on the one or more reference acoustic signal reflections; generating one or more sample acoustic signals within a sample fluid; receiving one or more sample acoustic signal reflections; and determining a frequency-dependent attenuation function of the sample fluid based, at least in part, on the one or more sample acoustic signal reflections and the frequency-dependent response function.

A gyroscope includes a substrate, a first structure, a second structure and a third structure elastically coupled to the substrate and movable along a first axis. The first and second structure are arranged at opposite sides of the third structure with respect to the first axis A driving system is configured to oscillate the first and second structure along the first axis in phase with one another and in phase opposition with the third structure. The first, second and third structure are provided with respective sets of sensing electrodes, configured to be displaced along a second axis perpendicular to the first axis in response to rotations of the substrate about a third axis perpendicular to the first axis and to the second axis.

A flow speed measurement method includes conducting a heat exchange at a prescribed part of a surface of a pipe, the flow speed measurement method further includes measuring a temperature distribution in a pipe-axis-direction on the surface of the pipe in a case that the heat exchange has been conducted at the prescribed part, and the flow speed measurement method further includes determining a flow speed of a thermal fluid flowing inside the pipe, based on the temperature distribution measured.

In a method of operating a sensor assembly for a fluid tank of a motor vehicle, plural sensor elements of the sensor assembly are electrically connected to a sensor controller. The sensor controller determines measuring data from the sensor elements, and transmits the measuring data from at least some of the sensor elements separately and at least in part sequentially to a reprogrammable control unit.

Embodiments of the disclosure relate to ultrasonic inspection of turbine components. In one embodiment, a method for ultrasonic inspection of a turbine component can include mounting at least one array of transducer elements to the turbine component, (a) separately pulsing a transducer element of the at least one array of transducer elements to transmit a signal to the turbine component, (b) capturing reflected signals from the turbine component at each transducer element in the at least one array of transducer elements, repeating (a) and (b) for each of the other transducer elements in the at least one array of transducer elements, maintaining a constant relative position of the array of transducer elements with respect to the turbine component, analyzing the captured reflected signals using a computer, generating an image of the interior volume of the turbine component by reconstruction of the captured reflected signals and based at least in part on detecting an anomaly in the image of the interior volume of the turbine component, identifying at least one defect or failure in the turbine component.

A method for operating a test station (10) for portable gas-measuring devices (20) is provided. The gas-measuring device (20) is arranged in fluid-communication with the test station (10) via at least one interface (13). A flow time is set, during which the test gas (30) is fed and a waiting time is set, during which no test gas (30) is fed. After an end of the feed of the at least one test gas results of the test are analyzed. The test station (10) is configured for feeding at least one test gas (30) to the interface (13). The test station (10) for portable gas-measuring devices (20) has at least one interface (13) for the fluid-communicating arrangement of the gas-measuring device (20), and wherein the test station (10) is configured for feeding at least one test gas (30) to the interface (13).

Systems and methods are provided for calibrating and regulating the temperature of a sensor. One or more temperature adjusting devices can be provided to regulate the temperature of the sensor. One or more of the temperature adjusting devices can be provided to perform a calibration to determine a relationship between sensor bias and sensor temperature. The one or more temperature adjusting devices can be built into the sensor.

The invention provides a method for acquiring fragment ion spectra of substances in complex substance mixtures wherein a trapped ion mobility spectrometer (“TIMS”) is used as the ion mobility separation device coupled to a triple quadrupole mass filter assembly. The fragment ion spectra may be used for the identification of high numbers of proteins in complex mixtures, or for a safe quantification of some substances, by their fragment ion mass spectra in a mass spectrometer with upstream substance separator. TIMS, in particular equipped with parallel accumulation, provides the unique possibility to prolong the ion accumulation duration to find more detectable ion species without decreasing the measuring capacity for fragment ion mass spectra. The high measurement capacity for fragment ion mass spectra permits the repeated measurement of low abundance ion species such as to improve the quality of the fragment ion spectra.

A method and apparatus for controlling a dose of extreme ultraviolet (EUV) radiation generated by a laser produced plasma (LPP) EUV light source. In one embodiment, a running total of the EUV energy generated over a predetermined number of laser pulses is measured; once that number of pulses is exceeded, the energy from the pulse immediately preceding the most recent predetermined number of pulses is dropped from the running total, so that the running total is from the most recent predetermined number of pulses. If the running total of the EUV energy exceeds a target dose, the next pulse is caused to not hit a droplet. This avoids the unwanted side effects of various prior art solutions, such as needing to miss many droplets in a row, or requiring the laser pulses to be shortened or reduced in power as in other prior art solutions.

Disclosed is an apparatus configured for collection and sterilization of expectorates. According to the embodiments of the invention, the apparatus includes a receptacle having an interior space defined by a bottom wall, and one or more side walls, an opening at a top portion for selectively receiving a separator for the expectorates to pass therethrough and be received at the interior space, and a power source, one or more light sources, such as ultraviolet (UV) light source radiating rays of sufficient wavelengths capable of sterilizing the expectorates received at the interior space, a reflective source surrounding the interior space of the receptacle for substantially reflecting the radiated rays throughout the interior space to effectively sterilize the expectorates received at the interior space, and a receptacle lid removably engaging the separator to close the opening at the top portion of the receptacle.

The present invention generally relates to fluorescent marking compositions and their use to determine whether a surface has been cleaned. More particularly, the marking compositions comprise fluorescent polymers.

A spectrometer module comprising a plurality of separate electronic circuit modules is disclosed. Each separate electronic module comprises an integrated sensor circuit including a light sensitive area occupying part of an area of the integrated sensor circuit, the integrated sensor circuit being arranged to detect incident light. In one aspect, the plurality of separate electronic circuit modules includes a group of adjacent electronic circuit modules. The light sensitive areas of the electronic circuit modules in the group are so arranged on the respective integrated sensor circuits that the group of adjacent electronic circuit modules is mounted so that the light sensitive areas thereof are arranged in vicinity to each other. The spectrometer module includes an optical module, which is common to said plurality of separate electronic circuit modules and arranged to direct incident light towards the light sensitive areas of each of said electronic circuit modules.

Measuring system for measuring the properties of an organic material, e.g. meat, comprising a light source unit emitting light within at least one chosen range of wavelengths, the light source unit being coupled to a light guide in a ferrule being adapted to be introduced into said material, the system also comprising detector means for being adapted to receive light within said at least two wavelength ranges comprised within said emitted range of wavelengths, having passed through a chosen length in said material, and analyzing means for evaluating the condition of the material based on the measured absorption in the material in said at least two ranges of wavelengths

An analyser 10 for identifying or verifying or otherwise characterising a liquid based drug sample 16 comprising: an electromagnetic radiation source 11 for emitting electromagnetic radiation 14a in at least one beam at a sample 16, the electromagnetic radiation comprising at least two different wavelengths, a sample detector 17 that detects affected electromagnetic radiation resulting from the emitted electromagnetic radiation affected by the sample, and a processor 18 for identifying or verifying the sample from the detected affected electromagnetic radiation, wherein each wavelength or at least two of the wavelengths is between substantially 1300 nm and 2000 nm, and each wavelength or at least two of the wavelengths is in the vicinity of the wavelength(s) of (or within a region spanning) a spectral characteristic in the liquid spectrum between substantially 1300 nm and 2000 nm.

The present disclosure provides a ray calibration device and a working method thereof, and a radiation imaging system and a working method thereof, and belongs to the field of radiation imaging technology. The present disclosure can solve the problems that the existing calibration devices have low calibration efficiency and require relatively large spaces. The ray calibration device of the present disclosure includes a driving part, a cam part and a calibration part, wherein the calibration part is located below the cam part; the driving part is adapted to drive the cam part to rotate; and the cam part is adapted to exert a force on the calibration part to enable the calibration part to move into a ray area downwards.

A mass spectrometer is disclosed comprising a first ion trap or ion guide, a single ion mobility spectrometer or separator stage and a second ion trap or ion guide arranged downstream of the ion mobility spectrometer or separator. In a mode of operation ions from the second ion trap or ion guide are passed from the second ion trap or ion guide back upstream to the ion mobility spectrometer or separator.

Techniques are described that includes using a memory to store data within a system. The techniques include lowering a supply voltage applied to said memory and ceasing use of the memory to store data within the system. The techniques further include reading values from the memory with the supply voltage being lowered. The techniques further include determining a radiation level from an amount of corrupted ones of the values.

Embodiments of the present invention provide a protective device including a sliding door and a housing, together forming a closed space, wherein, a guide rail is provided on the housing, and the sliding door is slidable along the guide rail to open or close the closed space. In addition, embodiments of the present invention also provide a laser Raman safety inspection apparatus including the abovementioned protective device.

A method of mass spectrometry is disclosed that comprises acquiring mass spectral data during a single experimental run or acquisition of a mass spectrometer and determining a first time T during the single experimental run or acquisition for calibrating the mass spectrometer. The step of determining the first time T further comprises determining a time when the mass spectral data being acquired during the single experimental run or acquisition is equal to or below a threshold. The mass spectrometer is then calibrated by introducing calibrant or lockmass ions at the first time T.

Superconducting nanowire avalanche photodetectors (SNAPs) have using meandering nanowires to detect incident photons. When a superconducting nanowire absorbs a photon, it switches from a superconducting state to a resistive state, producing a change in voltage that can be measured across the nanowire. A SNAP may include multiple nanowires in order to increase the fill factor of the SNAP's active area and the SNAP's detection efficiency. But using multiple meandering nanowires to achieve high fill-factor in SNAPs can lead to current crowding at bends in the nanowires. This current crowding degrades SNAP performance by decreasing the switching current, which the current at which the nanowire transitions from a superconducting state to a resistive state. Fortunately, staggering the bends in the nanowires reduces current crowding, increasing the nanowire switching current, which in turn increases the SNAP dynamic range.

A method that includes clarifying a thin stillage product in a mechanical processor to produce a fine suspended solids stream and a clarified thin stillage is provided. The method further includes providing the thin stillage product and the clarified thin stillage, separately or in a combined stream, to one or more evaporators to produce one or more reduced suspended solids streams, each stream having a reduced amount of suspended solids and a lower viscosity as compared to process streams having a comparable total solids content but containing a higher amount of suspended solids. The method can further included further processing of one or more of the reduced suspended solids streams to produce a bio-oil product.

Measurements are taken of moisture, BTU/lb (British Thermal Units per pound), ash, forms of sulfur, volatile material, grindability, and absorption properties of any of a wide variety of mine-run solid fuels. Using that information, a dry electromagnetic process technology has been developed that can be controlled and monitored to selectively alter and enhance metallurgical solid fuel properties. Specific changes include altering the mechanical structure and chemical composition of solid fuels such as coal, coal coke or petroleum coke, increasing the BTU/lb to optimum levels, decreasing all forms of sulfur, and decreasing ash, while maintaining the BTU/lb of the fuels. A new family of solid fuel designer coals not found in nature can be produced via these methods and apparatus.

A method for improving performance of fuel injectors, and a method for cleaning fuel injectors for an internal combustion engine. The methods include operating the engine on a fuel composition comprising a major amount of fuel and from about 1 to about 200 ppm by weight based on a total weight of the fuel of a reaction product of (i) a hydrocarbyl substituted compound containing at least one tertiary amino group and (ii) a halogen substituted C2-C8 carboxylic acid, ester, amide, or salt thereof, wherein the reaction product as made is substantially devoid of free anion species.

The present invention provides novel techniques for controlling the output of a distillation sub-process by controlling, using model predictive control, the temperature of steam used in the distillation sub-process, wherein the steam is generated in a milling and cooking sub-process. In particular, the present techniques are presented in the context of biofuel production, wherein the temperature of a cook tube generated in a milling and cooking sub-process may be controlled to optimize the energy utilization in the ethanol/water separation of a side stripper column, which uses the cook flash steam as an energy source. However, the present techniques may also be applied to other suitable applications, such as liquor processing, where steam generated in a different process may be used in a distillation process to help separate water from the liquor.

The present invention is directed to a degradation composition, methods and kits for degrading organic pollutants comprising reduced copper based nanoparticles-polymer complex (Cu-NPs) and an oxidant.

Described herein is a graphene material based membrane that provides selective resistance for solutes or gas while providing water permeability. A selectively permeable membrane comprising graphene oxide, reduced graphene oxide, and also functionalized or crosslinked between the graphene, that provides enhanced salt separation from water or gas permeability resistance, methods for making such membranes, and methods of using the membranes for dehydrating or removing solutes from water are also described.

An apparatus and a method are provided for an application specific fuel filter that is configured to prevent particulates from entering the fuel system of a motor vehicle, the fuel filter comprising a hollow canister comprising a length and diameter; a first end comprising a fuel inlet; a second end comprising a fuel outlet; a filter element comprising a plurality of pleats; and a rolled seam.

The present disclosure relates to the technical field of degradation of persistent pollutants and discloses a method for efficiently degrading a perfluorinated compound (PFC), through which the problems of harsh reaction conditions and less high defluorination rate existing in prior-art methods for degrading PFCs are solved. In the present disclosure, a 3-indoleacetic acid (IAA) solution is irradiated with 254 nm UV light to generate hydrated electrons, with which the PFC are degraded by reduction under an aerobic condition, where an organo-modified montmorillonite is added to provide a reaction microzone, so the degradation and defluorination effects of the hydrated electrons for the PFC are greatly improved. The method for degrading a PFC according to the present disclosure is not affected by the pH of and the dissolved oxygen in the solution and less affected by the humic substances in a water body, thereby overcoming the defects in existing methods for degrading PFCs with hydrated electrons while the degradation efficiency is ensured. Therefore, the present disclosure is of great application value.

Disclosed herein are methods for reducing fouling caused by process water present within a water recycling loop of a pyrolysis plant. The process water includes water, a pygas, and in some cases pygas byproducts. Fouling is caused by phase separation and accumulation of materials from the process water on equipment surfaces. The method includes applying a total of about 5 ppm to 500 ppm of one or more antifouling polymers to the process water to form a treated process water. The one or more antifouling polymers are selected from the group consisting of copolymers of unsaturated fatty acids, primary diamines, and acrylic acid; copolymers of methacrylamidopropyl trimethylammonium chloride with acrylic acid and/or acrylamide; copolymers of ethylene glycol and propylene glycol; and blends of two or more thereof.

'Don’t build technology for Mordor.' On Saturday at Peter Thiel’s San Francisco home overlooking the Bay, protesters demonstrated against a collaboration between Immigration and Customs Enforcement and Palantir Technologies, a data-mining firm that Thiel co-founded. As reported in The Intercept, ICE will be using a new Palantir product called Investigative Case Management to to aid in its expanded deportation mission.…

Recently, a video where a woman called the police on a Black family who was barbecuing at Lake Merritt went viral, and several local and national outlets published pieces on the outraging incident.…

And her joys as well, in an entertaining biodoc of film critic Pauline Kael. It's hard to believe from today's vantage point, but the liveliest, most intelligent cultural discussions in late-20th-century America — as well as some of the finest writing —- were about the movies. And the leading voice in most of those discussions belonged to a woman from Berkeley, Pauline Kael.…

Beanpole sees post-WWII Russia through the eyes of two emotionally drained women. The scene is the former Leningrad in 1945, a few weeks after the close of World War II. The characters in Kantemir Balagov’s Beanpole are what’s left after the horrendous two-and-a-half-year siege of the city by the German invaders, in which some 800,000 civilians perished from cold and hunger.…

This Mexico City taquero serves tacos and tortas sure to satisfy soccer stars. Most gym-goers have a favorite post-workout meal. Some swear by chocolate milk with its blend of sugar, protein, and fat, while others swear by cottage cheese, oatmeal, or smoothies.…

The chamber of commerce is maintaining a list of local eateries still open for business. The Oakland Chamber of Commerce has compiled a list of more than 175 Oakland restaurants offering takeout or home delivery. The City of Alameda had a similar idea, and has created a website listing about 85 restaurants.…

The present invention relates to in vitro methods of assessing the susceptibility or responsiveness of a subject to the treatment with an epidermal growth factor receptor (EGFR) inhibitor/antagonist, wherein the subject has been diagnosed or suspected of suffering from inflammation-associated. These methods comprise determining the level of expression of EGFR in myeloid cells in a sample from the subject, wherein an expression of EGFR in the myeloid cells is indicative of the subject being susceptible to the treatment with an EGFR inhibitor/antagonist. The invention also relates to EGFR inhibitors/antagonists for use in the treatment or amelioration of inflammation-associated cancer. The invention furthermore provides in vitro methods of prognosing the survival time, progression-free survival time or disease course of a subject that has been diagnosed or suspected of suffering from from inflammation-associated cancer. In addition thereto, the invention relates to in vitro diagnostic methods of assessing the proneness of a subject to develop inflammation-associated cancer in which the expression of EGFR is determined in myeloid cells from the subject.

A method to detect prostate cancer comprising contacting a sample of prostate cells from the patient with a set of detectably labeled probes under hybridization conditions and determining the presence of chromosomal abnormalities in prostate tumor tissue, PIN (intra-epithelial neoplasia), histologically benign tissue and benign prostatic hyperplasia (BPH); a method to combine immunofluorescence and FISH (IF-FISH) to facilitate the assessment of chromosomal abnormalities; a set of probes; and a kit comprising the set of probes and instructions for diagnosing prostate cancer in a patient.

The diagnosis of male infertility is based predominantly on the results of standard semen analysis for concentration, total motility, progressive motility, volume, pH, viscosity and/or morphology. When sperm enter the female reproductive tract, they must undergo a series of physiological changes, known as capacitation, in order to fertilize an egg. This process involves plasma membrane changes that occur in response to stimuli within the female tract. These changes include removal of sterols and redistribution of the ganglioside GM1. Semen analysis identifies only half the cases of male infertility due to standard semen analysis providing little information on sperm functional competence. Previous data demonstrated that localization of the ganglioside, GM1, identifies sub-populations of sperm capable of undergoing the functional maturation process known as capacitation and tracks strongly with fertility.

In sporadic Alzheimer's disease, neurofibrillary lesion formation is preceded by extensive post-translational modification of the microtubule associated protein tau. Immunoassays have been developed recently that detect tau in biological specimens, thus providing a means for pre-mortem diagnosis of Alzheimer's disease, which has remained elusive. These assays have been improved by the analysis of relevant post-translational modifications, such as phosphorylation, however opportunity for improvement remains. The present invention addresses this issue by disclosing synthetic methylated peptides derived from the tau protein of paired helical filaments and non-diseased control brain. Alzheimer's disease specificity is provided by the presence or absence of methyl moieties on lysine residues and differences between mono-, di-, and tri-methylation. The methylated peptide is useful as an antigen and a binding partner for identifying compounds that interact with the peptide and the methylated tau protein, including antibodies that can distinguish non-diseased brain from that affected by Alzheimer's disease. The resulting antibodies are useful diagnostically and therapeutically. The compounds that specifically bind to methylated tau proteins are useful for eliminating abnormally methylated tau.

People for the Ethical Treatment of Animals sent UC Berkeley chancellor Carol Christ a letter today requesting permission to place a banner on the university's famous clocktower that reads "It's High Time We Went Vegan. PETA."…

Benchmark Pizzeria in Old Oakland has closed permanently.

A notice now posted at the restaurant's website, addressed "to our Friends, Regulars, and Supporters," reads:

"We have made the very tough decision to close Benchmark Oakland permanently.…

A method and system for cooling a device (preferably a micro-device), comprising cooling the device by using a lower critical solution temperature (LCST) mixture. Enhancement of heat transfer rates is achieved during phase separation of a two-component system (two-component mixture) with a LCST. Convective heat transfer rates in small diameter pipes and over a vertical (hot) plate are demonstrated.

A package includes a conductive pad, with a plurality of openings penetrating through the conductive pad. A dielectric layer encircles the conductive pad. The dielectric layer has portions filling the plurality of openings. An Under-Bump Metallurgy (UBM) includes a via portion extending into the dielectric layer to contact the conductive pad. A solder region is overlying and contacting the UBM. An integrated passive device is bonded to the UBM through the solder region.

CHRISTINE Cassell (letters 28th April) asks a pertinent question when she enquires where the responsibility for the problem with PPEs for front line NHS workers lies.

More rose-tinted views of the EU: the EU not falling apart?

The achievement of 75 years without any wars between European countries is unprecedented in history.

Bandcamp is waiving their fees, so we're going to spotlight and promote you, our community members.

The post Operation: Help DJTT Artists – submit your Bandcamp project and we’ll promote you. appeared first on DJ TechTools.

Now how can I be more of a “guy” for my boyfriend? My boyfriend and I were having relationship issues until we tried something new: pegging. He wanted to try it, but he was afraid and sometimes said the idea disgusted him.…

The Town’s soccer franchise returns to the pitch this weekend with a new head coach and other fresh faces, kicking off its second season in front of Oakland's loud, loyal fans at Laney College. Last year, professional soccer planted seeds in Oakland. This year, fans hope to see them bloom into something beautiful, preferably with lots of wins on the Laney College pitch.…