On 26 September 2014, the OECD Council adopted three new, five updated and one corrected OECD Test Guidelines for the testing of chemicals.

Last Sunday we said that Mike and Linda Hughes of Astley Burf, Worcestershire, had sold a plot of land to a gipsy family and villagers later felt pressured to buy it back for £100,000.

Archives, Room Use Only - E608.K47 1890

Archives, Room Use Only - CS71.V129 1947

The Smithsonian’s National Air and Space Museum recently obtained two monumental instruments on loan from NASA’s Goddard Space Flight Center.

The post New Acquisition: Corrective instruments from the Hubble Space Telescope appeared first on Smithsonian Insider.

Relativistic electron diffraction depends on linear and quadratic terms in the electric potential, the latter being neglected in the frequently used relativistically corrected Schrödinger equation. The quadratic electric potential term modifies atomic scattering amplitudes in particular for large-angle scattering and backscattering. The respective correction increases with increasing scattering angle, increasing atomic number and increasing kinetic energy. Conventional tabulations for electron scattering and its large-angle extrapolations can be amended in closed form by a universal correction based on the screened Coulomb potential squared.

Attempting to display the contents of an HDF5 file containing fixed-length UTF-8 encoded strings results in an unexpected error in MATLAB.

For example, the following code

  h5disp('myHDF5FileWithFixedLenUTF8Strings.h5')

returns this error:

Error using h5infoc
UTF-8 encoding is only supported for variable length strings.

Error in h5info (line 108)
hinfo = h5infoc(filename,location, useUtf8);

Error in h5disp>display_hdf5 (line 121)
hinfo = h5info(options.Filename,options.Location);

Error in h5disp (line 99)
display_hdf5(options);

Simulink might produce an incorrect sorted order for a model that meets all of the following conditions:

• The model contains blocks from the SoC Blockset
• The Signal logging option is selected in the model configuration set
• Signals using asynchronous sample time are configured for logging

If you try to open a text file with UTF-16 or UTF-32 encoding, the Import Tool displays a warning message stating that the encoding is not supported.  If you continue to load the file anyways, it is opened with UTF-8 encoding, and the file may not be displayed or imported as expected.This bug exists in the following release(s):
R2020a

This bug has a workaround

Interested in Upgrading?

The Debye scattering equation (DSE) is generalized and augmented in order to account for moderate texture effects, yielding the differential cross section as a function of atomic coordinates and texture coefficients subject to symmetry constraints. Implications for the evaluation of the pair distribution function (PDF) as a direct transform of powder diffraction data from textured samples are also discussed.

Despite the importance of eyesight, millions of people grapple with undiagnosed or untreated vision impairments — ranging from mild conditions to total blindness — and eye and vision health remain relatively absent from national health priority lists, says a new report from the National Academies of Sciences, Engineering, and Medicine.

Misreported fishing catches in the Baltic Sea have probably led to incorrect fishing quotas, new research suggests. The study found that total catches between 1996 and 2009 have been underestimated for a significant period, skewing quota calculations.

000
WTPZ63 KNHC 150036 CCA
TCUEP3

Hurricane Kiko Tropical Cyclone Update...Corrected
NWS National Hurricane Center Miami FL EP132019
530 PM PDT Sat Sep 14 2019

Corrected location coordinates

...HURRICANE KIKO NEAR MAJOR HURRICANE STRENGTH...

Recent satellite-based intensity estimates indicate that Hurricane
Kiko has rapidly strengthened since the last advisory. The maximum
sustained winds have increased to 110 mph (175 km/h). The higher
intensity will be reflected in the next forecast advisory, which
will be issued before 800 PM PDT.


SUMMARY OF 530 PM AST...0030 UTC...INFORMATION
----------------------------------------------
LOCATION...17.0N 119.7W
ABOUT 760 MI...1225 KM WSW OF THE SOUTHERN TIP OF BAJA CALIFORNIA
MAXIMUM SUSTAINED WINDS...110 MPH...175 KM/H
PRESENT MOVEMENT...W OR 270 DEGREES AT 12 MPH...19 KM/H
MINIMUM CENTRAL PRESSURE...970 MB...28.64 INCHES

$$
Forecaster Zelinsky

000
WTNT21 KNHC 192059 CCA
TCMAT1

POST-TROPICAL CYCLONE NESTOR
FORECAST/ADVISORY NUMBER 10...CORRECTED
NWS NATIONAL HURRICANE CENTER MIAMI FL AL162019
2100 UTC SAT OCT 19 2019

CORRECTED 12 FT SEAS RADII

CHANGES IN WATCHES AND WARNINGS WITH THIS ADVISORY...

THE TROPICAL STORM WARNING HAS BEEN DISCONTINUED FOR THE GULF COAST
OF FLORIDA.

SUMMARY OF WATCHES AND WARNINGS IN EFFECT...

THERE ARE NO TROPICAL CYCLONE COASTAL WATCHES OR WARNINGS IN EFFECT.

POST-TROPICAL CYCLONE CENTER LOCATED NEAR 30.4N 84.1W AT 19/2100Z
POSITION ACCURATE WITHIN 30 NM

PRESENT MOVEMENT TOWARD THE NORTHEAST OR 55 DEGREES AT 20 KT

ESTIMATED MINIMUM CENTRAL PRESSURE 999 MB
MAX SUSTAINED WINDS 35 KT WITH GUSTS TO 45 KT.
34 KT.......210NE 0SE 0SW 0NW.
12 FT SEAS..240NE 180SE 0SW 0NW.
WINDS AND SEAS VARY GREATLY IN EACH QUADRANT. RADII IN NAUTICAL
MILES ARE THE LARGEST RADII EXPECTED ANYWHERE IN THAT QUADRANT.

REPEAT...CENTER LOCATED NEAR 30.4N 84.1W AT 19/2100Z
AT 19/1800Z CENTER WAS LOCATED NEAR 29.8N 85.0W

FORECAST VALID 20/0600Z 32.3N 81.4W...POST-TROP/EXTRATROP
MAX WIND 40 KT...GUSTS 50 KT.
34 KT...200NE 200SE 0SW 0NW.

FORECAST VALID 20/1800Z 35.0N 76.7W...POST-TROP/EXTRATROP
MAX WIND 40 KT...GUSTS 50 KT.
34 KT...200NE 200SE 0SW 0NW.

FORECAST VALID 21/0600Z 36.8N 72.0W...POST-TROP/EXTRATROP
MAX WIND 45 KT...GUSTS 55 KT.
34 KT...200NE 200SE 0SW 150NW.

FORECAST VALID 21/1800Z 36.8N 68.0W...POST-TROP/EXTRATROP
MAX WIND 40 KT...GUSTS 50 KT.
34 KT...120NE 120SE 150SW 150NW.

FORECAST VALID 22/1800Z 36.5N 65.5W...POST-TROP/EXTRATROP
MAX WIND 35 KT...GUSTS 45 KT.
34 KT...120NE 0SE 0SW 120NW.

EXTENDED OUTLOOK. NOTE...ERRORS FOR TRACK HAVE AVERAGED NEAR 150 NM
ON DAY 4 AND 175 NM ON DAY 5...AND FOR INTENSITY NEAR 15 KT EACH DAY

OUTLOOK VALID 23/1800Z...DISSIPATED

REQUEST FOR 3 HOURLY SHIP REPORTS WITHIN 300 MILES OF 30.4N 84.1W

THIS IS THE LAST FORECAST/ADVISORY ISSUED BY THE NATIONAL HURRICANE
CENTER ON NESTOR. ADDITIONAL INFORMATION ON THIS SYSTEM CAN BE
FOUND IN HIGH SEAS FORECASTS ISSUED BY THE NATIONAL WEATHER
SERVICE...UNDER AWIPS HEADER NFDHSFAT1 AND WMO HEADER FZNT01 KWBC.


$$
FORECASTER STEWART

After using the bathroom, 95 percent of people fail to wash their hands long enough to kill harmful bacteria.

When crisis hits, the jokesters come out of the woodwork. Here is what to expect.

Gefion has disagreed with the decision, as the regulator points to issues with one of the provider's reinsurance contracts.

An upcoming Christie's antiquities auction in London will feature a first-century Roman funerary plaque that has been the subject of scholarly research and drawn recent international news attention.

Take a listen to Jonathan Murray on WBAL News Now from Monday.

It is a requirement that a visa applicant must fill in or complete his or her application form in a manner that all questions are answered, and no incorrect answers are given or provided. There is also a requirement that visa applicants must not provide incorrect information during interviews with the Minister for Immigration (‘Minister’), […]

The post Visa cancelled due to incorrect information given or provided to the Department of Home Affairs appeared first on Visa Australia - Immigration Lawyers & Registered Migration Agents.

Described herein are devices, compositions, and methods for improving color discernment.

A logical operations functional block for an execution unit of a processor includes a first input data link for a first operand and a second input data link for a second operand. The execution unit includes a register connected to an error correction code detection unit. The logical operations functional block includes a look-up table configured to receive an error correction code syndrome from the error correction code detection unit. The logical operations functional block also includes a multiplexer configured to receive an output signal from the look-up table at a first input and the first operand at a second input, wherein an output of the multiplexer is coupled to the first input data link of a logical functional unit.

Embodiments of apparatus and methods for error detection and correction are described. A codeword may have a data portion and associated check bits. In embodiments, one or more error detection modules may be configured to detect a plurality of error types in the codeword. One or more error correction modules coupled with the one or more error detection modules may be further configured to correct errors of the plurality of error types once they are detected by the one or more error detection modules. Other embodiments may be described and/or claimed.

A packet transmission/reception apparatus and method is provided. The packet transmission method of the present invention includes acquiring a source payload including partial source symbols from a source block, generating a source packet including the source payload and an identifier (ID) of the source payload, generating a repair packet including a repair payload corresponding to the source payload and an ID of the repair payload, generating a Forward Error Correction (FEC) packet block including the source and repair packets, and transmitting the FEC packet block. The source payload ID includes a source payload sequence number incrementing by 1 per source packet. The packet transmission/reception method of the present invention is advantageous in improving error correction capability and network resource utilization efficiency.

The present invention discloses a method and apparatus for processing and error correction of a GFP-T superblock, where the 64 bytes of payload data of a first superblock are buffered in the first page of a two-page buffer. The flag byte is buffered in a separate buffer, and a CRC operation is performed in a separate logic element. The result of the CRC operation is checked against a single syndrome table which may indicate single- or multi-bit errors. As the payload data of the first superblock is processed and read out of the first page of the two-page buffer, the payload data of a second superblock is written into the second page of the two-page buffer to be processed and corrected.

An error control encoding system produces a codeword from a data word, where the resulting codeword includes the data word and three or more parity segments produced using the data word. The system includes a first encoder to encode the data word in two or more first data segments in order to produce two or more first parity segments, where each of the two or more first data segments includes a respective sequential portion of the data word. The system includes a second encoder to encode the data word in one or more second data segments in order to produce a corresponding one or more second parity segments, where each of the one or more second data segments includes a respective sequential portion of the data word, and each of the one or more second data segments also includes a sequential portion of the data included in a plurality of the two or more first data segments. Further, the system includes a controller configured to provide the two or more first data segments of the data word to the first encoder for encoding and to provide the one or more second data segments of the data word to the second encoder for encoding.

According to one embodiment, an audio controlling apparatus includes a first receiver configured to receive audio signal, a second receiver configured to receive environmental sound, a temporary gain calculator configured to calculate temporary gain based on environmental sound received by second receiver, a sound type determination module configured to determine sound type of main component of audio signal received by first receiver, and a gain controller configured to stabilize temporary gain that is calculated by temporary gain calculator and set gain, when it is determined that sound type of main component of audio signal received by first receiver is music.

Systems and methods for processing magnetic resonance imaging (MRI) data are provided. A method includes receiving MRI data comprising a plurality of k-space points and deriving a plurality of image data sets based on the MRI data, each of the plurality of MRI image sets obtained by zeroing a different one of the plurality of k-space points. The method further includes computing image space metric values for each of the plurality of image data sets and adjusting a portion of the MRI data associated with ones of the image space metric values that fail to meet a threshold value to yield adjusted MRI data.

A device for detecting a cardiac event is disclosed. Detection of an event is based on a test applied to a parameter whose value varies according to heart rate. Both the parameter value and heart rate (RR interval) are filtered with an exponential average filter. From these filtered values, the average change in the parameter and the RR interval are also computed with an exponential average filter. Before computing the average change in the parameter, large changes in the parameter over short times, which may be caused by body position shifts, are attenuated are removed, so that the average change represents an average of small/smooth changes in the parameter's value that are characteristic of acute ischemia, one of the cardiac events that may be detected. The test to detect the cardiac event depends on the heart rate, the difference between the parameter's value and its upper and lower normal values, and its average change over time, adjusted for heart rate changes. The upper and lower normal parameter values as a function of heart rate are determined from long term stored data of the filtered RR values and parameter values. Hysteeresis related data and transitory deviations from normal (e.g. vasospasm related data) are excluded from the computation of normal upper and lower parameter bounds.

A method and apparatus for exposure correction in scanners are disclosed. In the method, exposure is corrected for pixels received in an image sensor array. Exposure time is tracked for the incoming pixel data and a calibration factor is determined for correcting the gain, and the calibration factor is adjusted based on the tracked exposure time. In the apparatus, a scanner includes an illumination source and a sensor for receiving pixel data. Using values stored in a memory, circuitry is provided for determining a calibration factor, for tracking exposure time for the pixel data and for adjusting the pixel data based on the calibration factor and exposure time.

The claimed invention provides an improved posture correction tool in the form of a table to be used by chiropractic practitioners to treat mechanical disorders of the spine and musculoskeletal system. The improved posture correction tool provides a plurality of pads to support the various major areas of the body and has built in drop capability and adjustment capability for the pelvic pad, the lumbar pad, the thoracic pad and the head and cervical area. The claimed invention also has a novel cervical support.

An orthopedic device for correcting abnormalities in the wrist, hand, fingers and thumb of a newborn baby comprises a lightweight glove shaped semi rigid shell constructed and dimensioned to fit a newborn baby within a few hours of birth. A wrist or lower arm and hand engaging portion are rotatably connected and adjustable in one millimeter increments. The adjustments are made with no more than one millimeter correction per 24 hour period. The shell includes a wrist and lower forearm engaging portion, a hand engaging portion and a finger engaging portion and is adjustable for rotationally clockwise or counterclockwise about the longitudinal axis of the lower arm bone. Further adjustments may be made to rotate the fingers upwardly or downwardly, to the left or right and rotationally and/or rotational movement between the hand and lower arm. The invention also contemplates an orthopedic method for correcting skeletal abnormalities of the wrist, hand, fingers and thumb of a newborn baby.

A vision correction method for establishing the position of a tool center point (TCP) for a robot manipulator includes the steps of: defining a preset position of the TCP; defining a preset coordinate system TG with the preset position of the TCP as its origin; capturing a two-dimensional picture of the preset coordinate system TG to establish a visual coordinate system TV; calculating a scaling ratio λ of the vision coordinate system TV relative to the preset coordinate system TG; rotating the TCP relative to axes of the preset coordinate system TG; capturing pictures of the TCP prior to and after rotation; calculating the deviation ΔP between the preset position and actual position of the TCP; correcting the preset position and corresponding coordinate system TG using ΔP, and repeating the rotation through correction steps until ΔP is less than or equal to a maximum allowable deviation of the robot manipulator.

A work hanging apparatus includes a hanger line continuously conveying hangers each having a hook, a robot that has a hand with which a work having a hole is held and transfers the held work to a hanging location set in the hanger line, a controller controlling a movement of the hand to catch the hook of one of the hangers with the hole of the held work at the hanging location, a hole deviation detector that detects a positional deviation of the hole of the work, an attitude deviation detector that detects an attitudinal deviation of the hanger, and a corrector that corrects the movement of the hand according to the positional and attitudinal deviations.

A work hanging apparatus includes a hanger line continuously conveying hangers each having a hook, a robot that has a hand with which a work having a hole is held and transfers the held work to a hanging location set in the hanger line, a controller controlling a movement of the hand to catch the hook of one of the hangers with the hole of the held work at the hanging location, a hole deviation detector that detects a positional deviation of the hole of the work, an attitude deviation detector that detects an attitudinal deviation of the hanger, and a corrector that corrects the movement of the hand according to the positional and attitudinal deviations.

A clutch mechanism for a tape dispenser, for example, includes a first reel, a second reel, a biasing element, and a friction element. The first and second reels are rotatably disposed on first and second shafts. The biasing element is disposed between the second reel and second shaft such that the second reel is movable in a radial direction between first and second positions relative to the second shaft and the biasing element biases the second reel into the first position. The friction element extends around the first and second reels and arranged to generate a first normal force acting on the second reel when the second reel is in a first position, relative to the second shaft, and a second normal force acting on the second reel when the second reel is in a second position, relative to the second shaft.

A platform application and methods of operation that integrate both native and third-party modules into an integrated environment on an inmate computing device is disclosed. Third-party modules or systems are applications meant to operate independent from the platform application. Information is communicated between the platform application and third-party module or system to add audit, alarm and other functions across all modules or systems controlled by the platform software. The third-party module or system is audited to allow triggering of rules that cause remedial action to be taken. Triggers can be on actions not monitored by a particular third-party module or system.

An image forming device includes a photoreceptor drum including a target surface that is scanned in a main scanning direction and a sub-scanning direction, an exposure head including a plurality of light emitting segments aligned in parallel to the main scanning direction, an exposure driving unit which selectively drives the plural light emitting segments, a storing unit which stores a profile where the respective positions of the plural light emitting segments correspond to a correction amount from the main scanning direction toward the sub-scanning direction at every position, and a correcting unit which smoothes a local change of the correction amount in the profile.

An apparatus includes a case capable of receiving a plurality of capacitive elements, each capacitor element having at least two capacitors, and each capacitor having a capacitive value. The apparatus also includes a cover assembly with a peripheral edge secured to the case. The cover assembly includes, for each of the plurality of capacitive elements, a cover terminal that extends upwardly from the cover assembly generally at a central region of the cover assembly. Each cover terminal is connected to one of the at least two capacitors of the respective one of the plurality of capacitive elements. The cover assembly also includes, for each of the plurality of capacitive elements, a cover terminal that extends upwardly from the cover assembly at a position spaced apart from the cover terminal generally at the central region of the cover assembly.

The CPU acquires the output of an angular velocity sensor and performs image shake correction. An angle 1 calculating unit integrates a signal from which an offset component is removed to calculate an angle 1. An angular velocity subtraction amount calculating unit calculates an angular velocity subtraction amount based on a signal obtained by subtracting a first offset from the output of the angular velocity sensor and a signal obtained by subtracting a second offset from the output of the angle 2 calculating unit. An angle 2 calculating unit integrates a signal obtained by subtracting the angular velocity subtraction amount from the output of the angular velocity sensor to calculate an angle 2. The CPU performs image shake correction based on the angle 1 prior to operation of a release SW, whereas the CPU performs image shake correction based on the angle 2 after operation of the release SW.

In an embodiment, a processor-readable medium stores code representing instructions that when executed by a processor cause the processor to receive sheet length data for two paper sheets of a same standard dimension passing consecutively through a printing device. The processor calculates a length difference between the two paper sheets, and when the length difference exceeds a two-sheet threshold, it initiates an alignment correction cycle in a paper finishing device.

Described herein are methods and systems for providing corrective maintenance using global knowledge sharing. A method to provide corrective maintenance with a CM system includes performing a query to generate a ranking of fixable causes based on factors (e.g., symptoms, configuration, test). The ranking may be determined based on a fixable cause percent match with the factors. The ranking of fixable causes may be associated with one or more solutions for each fixable cause. The ranking can be updated based on performing tests or solutions.

A path display apparatus includes a first position command acquiring unit that acquires first position command for motors, a first position feedback acquiring unit that acquires first position feedback of each of the motors, a correction data acquiring unit that acquires correction data generated for each of the motors, a second position command calculating unit that subtracts the correction data from the first position command to calculate a second position command, a second position feedback calculating unit that subtracts the correction data from the first position feedback to calculate second position feedback, a command path display unit that displays a command path of the tip point of the tool, based on the second position command; and a feedback path display unit that displays a feedback path of the tip point of the tool, based on the second position feedback.

A method is provided. The method includes acquiring a first dataset at a first energy spectrum and a second dataset at a second energy spectrum. The method also includes extracting a metal artifact correction signal using the first dataset and the second dataset or using a first reconstructed image and a second reconstructed image generated respectively from the first and the second datasets. The method further includes performing metal artifact correction on the first reconstructed image using the metal artifact correction signal to generate a first corrected image.

A video processing circuit detects a risk boundary that is a part of a boundary between a dark pixel and a bright pixel, and is determined in accordance with the tilt azimuth of liquid crystal molecules from a boundary changed over the previous frame to the current frame and, for at least one side of dark pixels and bright pixels brought into contact with the detected risk boundary, corrects a video signal designating the application voltage of a liquid crystal element corresponding to the pixel of the frame brought into contact with the risk boundary out of a plurality of frames from the current frame to k frames (here, k is a natural number) following the current frame such that a lateral direction electric field generated between the dark pixel and the bright pixel decreases.

Generating a corrected electronic record of a locate and/or marking operation. The operation comprises locating and/or identifying, using a physical locate mark, presence or absence of an underground facility within a dig area. At least a portion of the dig area may be excavated or disturbed. First information relating to a location of the facility and/or the mark is received. Based at least in part on the first information, the location of the facility and/or the mark is represented to generate an electronic visual representation of the operation. Second information relating to a corrected location of the facility and/or the mark is received. Based at least in part on the second information, the corrected location is represented to generate a corrected electronic visual representation of the operation. Third information relating to the corrected representation of the operation is transmitted and/or stored to generate the corrected electronic record of the operation.

Provided is an A/D converter including an input terminal, a reference signal line for supplying a reference signal which changes temporally, a comparator, a correction capacitor connected to an inverting input terminal of the comparator; and an output circuit which outputs digital data corresponding to an analog signal input to the input terminal. In a first state in which a total voltage of a first analog signal and an offset voltage of the comparator is held in the correction capacitor, a second analog signal input to the input terminal is supplied to a non-inverting input terminal of the comparator, and the second analog signal or the total voltage is changed using the reference signal, thereby outputting, from the output circuit, digital data.

A system of investigating aberrations in a charged particle lens system, wherein a charged particle beam is directed from a multitude of directions through a pivot point on a sample stage. An image figure is recorded for each of multiple focus settings at each beam direction setting, creating a set of registered images. This set of images is compared to reference images to derive aberrations present in the lens system without the use of an amorphous sample present.

An apparatus of correcting belt-meandering for a secondary battery is disclosed. In one embodiment, the apparatus includes i) upper and lower rollers configured to receive a base material therebetween, wherein the base material comprises positive and negative electrode materials and an insulating material interposed between the electrode materials and ii) a driver portion configured to rotate the upper and lower rollers such that the base material is transferred in a first direction during the rotation. The apparatus may also include i) a support portion configured to support shafts of the driver portion and the upper and lower rollers and ii) a transverse moving mechanism configured to move the support portion in a second direction substantially perpendicular to the first direction.