Amichai Feit had known Seema Jayachandran as a Twitter-famous development economist.  She became Feit’s senior thesis advisor for a policy-analysis project that included economic field research in India.

The Princeton professor's research follows elephants, wolves and urban lizards. He hosts the new PBS series, "Human Footprint."

The landmark 2022 Inflation Reduction Act (IRA) has committed nearly $400 billion to mitigating climate change. Nine research teams across the U.S, including a Princeton team led by Jesse Jenkins, have now modeled the law's effect on U.S. carbon emissions.

SPIA’s Andrew Guess and research colleagues used de-identified data from Facebook and Instagram to explore how changes in the way content was delivered affected people's attitudes and behavior.

This is the second round of Princeton Alliance for Collaborative Research (PACRI) projects partnering HBCU and Princeton researchers.

Scientists have long known that magnetic fields probably extract energy from spinning black holes — they just didn’t know how.

Professor Wendy Laura Belcher and a primarily Ethiopian team of researchers and translators have brought new insight and access to Marian miracle stories — all now available on a website.

New paper from Princeton team challenges the conventional wisdom of superconducting quantum transitions.

Two projects — one that maps the function of the brain’s neuronal network in unprecedented detail and another that combines robotics and light-based computer circuits to create safe self-driving vehicles — have been awarded funding through Princeton’s Eric and Wendy Schmidt Transformative Technology Fund.

A new report led by Emily Carter and Elizabeth Zeitler *14 offers research and policy ideas, including carbon fiber replacements for rebar in construction and titanium in high-tech applications.

Decision informed by report of the CPUC Committee on Naming.

Craig B. Arnold has been named Princeton’s first University Innovation Officer and heads the new office.

“Close Encounters: Facing the Bomb in a New Nuclear Age” is on display at SPIA’s Bernstein Gallery through Oct. 25. 

Four Princeton researchers won major awards from the National Institutes of Health to support their blue-sky research.

Xie, a materials engineer, won a 2024 Packard Fellowship for creating atomically thin materials. “Thinking and inventing down to an atomic level like Saien is doing, most spectacularly I should add, is the future,” said James Sturm, ECE department chair.

In the Class of 2028, 71.5% of students qualify for financial aid and 21.7% of the class are lower-income students eligible for federal Pell grants.

Voting registration rates among Princeton undergraduate and graduate students have more than doubled largely thanks to the program.

The Martin A. Dale '53 Fellowship provides grants for Princeton seniors to spend the year after graduation on "an independent project of extraordinary merit." Juliette Carbonnier and Collin Riggins are the latest recipients.

He reflected on literature, compassion, belonging, home and the "qualities which make us human."

I was one of the outside readers1 for a volume in Cambridge University Press’s enormous “Elements” series, The New Witches of the West, by Ethan Doyle White. (Link is to Amazon US) To find that title, go to the main … Continue reading →

In order to make AO3's rules clearer to our users, we intend to update the AO3 Terms of Service (TOS) in mid-November 2024. Once this occurs, all users will need to agree to the updated TOS to continue using AO3. The full text has been posted for public review, as well as a detailed explanation of what has (and hasn't) changed:

• AO3 Terms of Service: 2024 Update Guide
• AO3 Terms of Service: 2024 Draft
• AO3 Terms of Service FAQ: 2024 Draft

Summary of changes

As part of reorganizing the TOS for better clarity, the new TOS is structured differently than the old one. A detailed explanation of what was changed and why is available in the update guide. These are the highlights:

• We've clarified the Content Policy, but we haven't changed what works are or are not allowed. If your fanwork was allowed on AO3 before, then it is still allowed.
• The TOS has been split into three pages (General Principles, Content Policy, and Privacy Policy). This should make it easier to find what you're looking for when you want to know about a specific part of the TOS.
• We've simplified the language throughout the TOS and removed redundant or overly specific phrases and passages. When longer explanations would help to provide clarity, we've added new questions to the TOS FAQ instead.
• We've updated the descriptions of how we and our subprocessors collect and process user information (including personal information) in the Privacy Policy.
• The Abuse Policy has been generalized to provide the AO3 Policy & Abuse committee with greater flexibility to determine how to address TOS violations, while still providing protections for fanworks in accordance with AO3's mission.
• The "Underage" Archive Warning, which is used for works that depict or describe underage sex, is being renamed to "Underage Sex". This does not change the meaning of this warning or how it is enforced. When the TOS update occurs, all works with the "Underage" Archive Warning will be recategorized automatically to display the new "Underage Sex" Archive Warning label instead. If you have a work that carries the "Underage" warning and you don't want it to display the "Underage Sex" label, you can replace it with the "Creator Chose Not to Use Archive Warnings" label at any time.

You can read the proposed changes and comment here on this news post with any questions, suggestions, or feedback you might have about the new TOS or TOS FAQ. Comments will remain open until November 18th, 2024. After comments close, the Board of Directors for the OTW (the Organization for Transformative Works, which is AO3's parent organization) will vote on the proposed changes to the Terms of Service. If the Board votes in favor, the Terms of Service will be updated and all users will be required to agree to the new TOS to continue using AO3.

To make your opinion heard prior to the Board vote, make sure to submit your comments here before November 18th.

---

ETA: We appreciate that all of you have many ideas, but please keep in mind that the Policy & Abuse committee handles AO3 rules, not AO3 features. If you have ideas for a feature (for example, improvements you want to see to Search and Filtering), please contact the Support committee about them instead. We won't be responding to feature requests on this news post.

This is the first solo exhibition of my work! I am very pleased and honored that the La Conner Quilt & Textile Museum offered me a show in their new Local Artist Exhibit Program's first-floor Landmarks Gallery.

Every Child Should Have Her Own Tree, hand-dyed, beaded, embroidered fabric collage

I hope some of you will be able to come see my work, as well as the work of the other two featured quilt artists in the upper floor galleries.
A couple of readers have contacted me asking if the above work, or any of the other pieces will be for sale...  Nope, afraid not... exhibition only, although the museum's excellent gift shop does carry my books.

Bringing my beadwork to the Museum

Demonstration prior to the Opening on April 1st.

Exhibition closed - beadwork back home again

Rosie, The Uncaged Hen

La Conner Quilt & Textile Museum

This fabric is called Kékfestö in Hungarian, a word that roughly translates as blue-dyed or blue-dying. Producing these fabrics is a cottage industry in Hungary, which dates back several centuries. The dye is indigo; the cloth is cotton; and the long, arduous process results in a type of batik fabric. The photo above shows a small fold of each of the fabrics I bought at the blue-dyed studio shown below. (As always, please click on the photos if you'd like to see more detail.)

When in Hungary in October, 2016, my quilting/travel friend (Lunnette) and I, as guests of my Hungarian bead sister, Anna Fehér, had the very exciting experience of visiting the hand-dying studio of Miklós Kovács in the little village of Tiszakécske, SE of Budapest. The studio, located behind his home, includes two rooms, one for printing the raw cloth with a wax resist, and the second for dying the printed cloth with indigo. In front of the building, you can see rods above the deck, which are used for hanging the fabric to dry after it is dyed, and a wagon loaded with printed cloth ready to be dyed.

Meet Mr. Miklós Kovács, now in his 80s! Charming and animated, he is explaining his traditional, hand-dying process to Anna. Blue-dying has been the Kovács family's livelihood since 1878, each new generation being trained by the previous Master. It is strictly a family affair. Miklós, his wife, Margit, and their two daughters, Gabriella and Mária, currently produce about 10,000 meters of Kékfestö (blue-dyed) fabric every year. When Mr. and Mrs. Kovács retire, the business will pass to their daughters. This post shows how they turn plain white cloth into beautiful fabrics with white motifs on an indigo background.

First, they need thousands of meters of fine-quality, tightly-woven, raw cotton cloth, which is rinsed to remove impurities, then carefully ironed and rolled onto wooden rods which fit onto the printing machine. This pile of untreated cotton cloth, manufactured in Turkey, is the remainder of a big shipment purchased at the start of the year.

Next they need a print block or plate. These are made with wire pins of various diameters, which are pounded into blocks of dense wood. Here you see the many plate choices available in the Kovács studio, each yielding a different motif on the fabric. The length of each print block is the same as the width of the fabric; the width is the width of the pattern repeat, generally designed to be about 4.5 inches..

This is the end of one of the print blocks, showing how the design is formed by setting metal pins of different diameters into the wooden block.

And here is the fabric (after dying it with indigo, and removing the wax resist), which was printed with the block in the photo above it. Naturally, a half-meter of this one came home with me!

This is the machine which is used to print the motif on the raw cotton cloth with a wax resist. Mr. Kovács keeps his printing machine, built in Germany 120 years ago, in good running condition with machinist skills he learned alongside his father.

You can see the sprocket, lower right, which is adjusted to advance the fabric through the machine in increments exactly the length of the pattern repeat. For most motifs, the fabric advances 4 to 5 inches after each time the print block is applied to the fabric, thus revealing the next short stretch of un-printed cloth.

Here you can see many meters of raw cotton cloth, suspended on a metal rod at the back of the printing press. There is a leader of waste cloth stitched to the end of the roll which has been fed through the rollers of the machine to get the process started.

At the front of the printing machine, a worker swipes a tray with wax resist, which is tinted green so that it will be visible on the printed cloth. The printing block touches down on the waxed tray, picks up a coating of was, and then presses firmly against the fabric.

After being imprinted with wax resist, the fabric is wound up and down through a drying rack located behind the printing machine.

When it is dry, the printed fabric is folded and stacked until there is a sufficient quantity to begin the dying process. You can see that some of the raw cloth in this pile was pre-dyed pink, blue, or beige. After over-dying with indigo and removing the resist, the motif on these pieces will be pink, blue or beige with an indigo background, rather than the much more common white motif with an indigo background.

This close-up photo shows how the fabric looks after the wax resist (tinted green so that is shows on white cloth) is dry. This is the motif being printed while we were there. Liking the design a lot, I was very pleased to find finished fabric in this pattern available to purchase.

And this is how the cloth will look after it is dyed with indigo, the wax resist removed, and the fabric washed and ironed. As you might have already guessed, a half-meter of this one came home with me!

As we watch the cloth passing slowly through the rollers of the printing machine, Lunnette holds a scrap of dyed fabric which was tied to the machine, indicating the motif currently being printed.

At last, we get to the dye pot!  Here on the burner, a concentrated indigo dye formula is being readied to pour into the dye vat.

Don't forget to wear those heavy rubber gloves, or the skin on your hands will be tinged with blue for a long time.
Mr. Kovács gave a long, animated talk (all in Hungarian, which I only slightly comprehend) about the whole process of blue dying. You've already seen how the cloth is printed with wax resist. The next step is to dye the background.

The cloth is dyed in a vat with the indigo dye-bath at 85 degrees C., then washed to remove the wax and rinsed to remove the excess dye. After rinsing, the cloth is looped over racks to dry outdoors, which completes the dying process. Sadly, he did no dying while we were there, so I don't have pictures or first-hand experience with precisely how it is done to share with you.

However the fabric is not yet ready to use. It must be starched, dried, and then pressed using both steam and steel rollers with heavy pressure, in order to create the traditionally desirable shiny finish on the cloth. Finally, the fabric is folded onto bolts for distribution to shops and end-users.

We learned how they hand-print motifs on cloth using a template, such that after dying, the fabric can be cut out and hemmed as a finished table cloth. You can see the templates hanging on the wall. The desired template is placed over the fabric, and a pencil used to mark the registration points for lining up the printing block. Fabrics which have already been printed are stacked in front of the templates. After being dyed, this fabric will be made into table cloths and runners of various sizes.

This is a section of cloth which as been marked with a template, and hand-stamped with wax resist. After dying with indigo and removing the wax, it will be made into a rectangular table cloth with a lovely double border all the way around.

Mrs. Kovács demonstrates for us how she lines up the print block with the penciled registration marks, and then lowers it onto the fabric. With the stamp resting on the cloth, she lightly pounds it with her fist to set the wax into the fabric. It was obvious to us that carefully making each wax impression all the way around the cloth takes a lot of time and concentration. As you an see below, the results of her hand-printing are stunning!.

Here is an example of a hand-stamped, indigo-dyed fabric made into a round table cloth. Obviously, it came home with me, and is perfect for my kitchen table!  This fabric is quite wide, and takes a great deal of space and time to print. Yet, the prices were very reasonable!

After spending several hours in the studio, we were invited to the house for a shopping bonanza! Fortunately, hoping ahead of time that we would be visiting a Kékfestö studio when we got to Hungary, we had saved our allowances for some months, and were prepared to shop for future quilting and sewing projects. The prices, ranging $10 to $15 per meter depending on the width, seemed very reasonable considering the quality of the fabric, and the extreme amount of work that goes into producing it.

In addition to yardage, both of us bought a table cloth and an apron. Mine is shown above.

What a totally delightful experience we had! Mr. and Mrs. Kovács are as friendly and nice as can be!  If you ever get to Hungary, you can find their fabrics and finished products in the picturesque town of Szentendre, just a short drive or train ride north of Budapest on the Danube River. Here is a website link.

To end our visit at the Kovács studio, here is a tribute photo of the elder Mr. Kovács, who during his boyhood in the 1920's was immersed in the world of his family's blue-dying business, and who continued producing Kékfestö indigo-dyed fabrics for his entire life, while training his own son to continue the trade.

Like his father, the younger Mr. Kovács has trained his daughters to continue when he retires, although I'm sure he has many more years to go, probably well into his 90s..

My last two photos in this post are a little surprise for you. Before falling in love with beading and quilting, my main passion was Hungarian folk dancing. I danced in a performance group for 10 years (and later became one of the group's choreographers), performing at many events in the Seattle area, including Bumbershoot and the Folklife Festival. We also performed at the World's Fair when it was in Vancouver, British Columbia. I and several of the other dancers in the group made most of our costumes using Hungarian fabrics and original costumes as patterns.

It was folk music and dance that first called my heart and soul into Hungary, where I have since spent a cumulative total of well over a year of my life, spaced over 14 different visits so far.

So, here you go. This is me, wearing a costume I made with Kékfestö fabric for performing the dances of the Szatmár region, located in northeastern Hungary. This photo was taken in September, 1986 at the World's Fair in Vancouver, Canada, where we performed on two separate occasions.

And this is me on stage at a festival in Redmond, WA, happy as can be, Hungarian folk music, song and dance, filling me with joy!  Michael Kappleman and I are the second couple from the left.

So you see...  Kékfestö and I go back a long way. Next, I'll be quilting with it!

*****
My apologies to Hungarians for not using the correct accent mark for the last letter of the Hungarian word Kékfestö. I spent 4 hours trying to do it, but could not get Blogger to accept anything I tried.

When my brother, Thom Atkins, visited last fall, he showed me (and a few quilting buddies) his new method for designing and constructing "scrappy improv wall quilts," a technique that turned out to be a lot of fun for me, especially given my long history with an improvisational, intuitive approach to bead embroidery.

Basically, what we did was to empty our bags or boxes of scraps onto a large table and start pawing through them, pulling out ones that appealed to us at that moment. For me it was all about color - red, magenta, fuchsia, with hints of pink, golden-yellow, orange, lavender, and dark green. All of the fabrics were in my scrap box. We had two days of Thom's demonstrations and guidance. During that time, each of us in our small group produced a unique and very pleasing "piece" or "block," measuring roughly 18 x 21 inches, the size of a fat quarter.

One of my red scraps, cut in a nice arc at one end, was the start of it all because I liked the shape and the color. Next I picked up a small strip of yellow, and held it behind the arc of red. Ooooh! Nice enough to repeat. The scrap of orange/red batik was large enough to cut a similar arc, and the strip of yellow was long enough to go behind that one too. These two arcs formed the basis of my piece.

You can see the two arcs above; the lower right was the first. The yellow strip was only about 3" wide, not enough to go all the way around the arcs, but I cut two shapes that would echo the top of each of the arcs. I layered the remaining scraps from that on top of the arcs along the vertical edges of the design. Then I put a dark green scrap behind the arcs and the yellow, which set them off nicely. The rest was just filling to the edges of the quilt with more scraps, including fussy-cut leaves and flowers.

The next step was to glue it all together along the 1/4" seam overlap, working in layers from bottom to top, and cutting away the excess fabric from the underside after each piece is glued. Cutting away the excess fabric leaves a double layer of fabric only at the seams; the rest is a single layer. The glue is Elmer's School Glue, Disappearing Purple, as shown below. It is an organic stick glue, relatively easy to sew through, repositionable, (in case you change your mind), and purple when first applied, drying to transparent (so you can see where exactly you are putting it).

Thom's method is a type of raw edge applique, typically accomplished with heat-fusible web, such as "wonder under." The typical method, given a complex, layered design such as mine, would have resulted in a thick, stiff, multi-layer surface, which would be difficult to quilt, even with a machine. In Thom's method, there is no web, and in most places only one or two layers of fabric. Like all raw edge techniques, the raw edges must be sewn down, and the resulting quilts are not very suitable for bed quilts unless there is heavy stitching over the raw edges (for example, dense, zig-zag, machine stitching).

After gluing my original (shown above) quilt top, I assembled the quilt, using a spray glue to layer the backing, batting and top. The next step was to stitch along the "seams," the overlapping, glued edge of each piece. From there, it was up to each of us as to how to finish the quilt, perhaps with machine quilting, such as stippling or contour stitches, or perhaps with beading, all of which Thom does on his quilts.

A couple of months went by after getting to the unfinished stage shown above. I liked it, but didn't know what to do with it, until one day when I was at our Senior Center, getting foot care from a trained nurse who comes a couple times a week to help those who need it. Her treatment room, about the size of a walk-in closet, has no windows. Her client faces the door to the room, a plain, wooden door.  "That door needs a quilt," I told her. The rest is history; my scrappy improv quilt, Eclipse,  hangs there now.

Only first I had to finish it. Above is the finished quilt, Eclipse. Below I'll tell you some of the finishing steps and about how I transformed it from looking flat and ordinary to sharp and textured using embroidery embellishments. Please click on the photo so you can see the details!

You might have noticed that the finished quilt is longer (better suited for hanging on a door) than the original piece. That was a challenge, although less than you might expect, because Thom had demonstrated for us how he sometimes extends the size of his quilts. In short, I roughly planned out the addition, the mock-up shown below, then created it using the same process and scraps as the original piece.


I used fusible "tape" made for butt-joining pieces of batting, to add a new piece of batting to the bottom edge of batting on the original (upper) part of the quilt. The horizontal strip of striped fabric overlaps the two parts of the quilt and the joined batting underneath. As you can see below, I added a fussy-cut flower over the striped fabric to break up the horizontal strip and visually join the two parts.


Confession time... I'm not good at machine quilting, and don't even have a proper quilting foot for my old machine (1972 Pfaff). I tried stitching around the fussy cut flowers to secure the glued edges, but failed miserably. What to do? Ah, hand-sew with embroidery stitches and floss? Yes! It took a few tries, but eventually I found stitch and thread combinations that worked.

It looked so good that I decided to add stitching and knots to the yellow arcs next. Wow! That popped the eclipse look! In the photo below, you can see bits of all the embroidery stitches I added. Not only does the embroidery provide embellishment and emphasis, it also further quilts the piece. Click the photo to see the detail and better read the stitch identification.


Here are two more detail photos of the finished quilt (without the text boxes).



Lots of fun, and I like the results! Will I do another one? Well, right now I've finally returned to my hexie project, where I'm likely to remain for many months, but after that, scrappy improv may be just what I need!

Charles (Charlie) Tennyson has been appointed Princeton’s new director of Transportation and Parking Services following a national search to fill the position. He previously served for five years as deputy director of the department.

Alban Forcione, an internationally renowned scholar of 17th-century literature of “Golden Age” Spain, the Walter S. Carpenter Jr., Professor of Language, Literature and Civilization of Spain, Emeritus, and Princeton alumnus, died Sept. 14 at age 82.

The new producing artistic director of the theater and music theater season at the arts center sat for an interview for our ‘What I think’ series.

Jacques R. Fresco, the emeritus Damon B. Pfeiffer Professor in the Life Sciences and an emeritus professor of molecular biology, died on Dec. 5. He served on Princeton's faculty for 53 years before retiring in July 2013.

Arden helped usher computers into widespread use and played a key role in establishing Princeton's Department of Computer Science.

Hale Freeman Trotter, an emeritus professor of mathematics, died at 91 at his home in Princeton, New Jersey.

Austin Newton, a founding member of the Department of Molecular Biology, established a new experimental system and mentored generations of undergraduates, graduate students and postdoctoral fellows. He died May 13 in Princeton at age 85.

The book joins others by Princeton faculty on The New Yorker list of the year’s best. Jarrett gives a talk at Labyrinth Books on Thursday, Nov. 3.

Hisashi Kobayashi, whose steady leadership as dean guided Princeton's School of Engineering and Applied Science through a rapid expansion of programs and facilities in the late 1980s and early 1990s, died on March 9. He was 84.

Morgan's paper on plate tectonics revolutionized the field of geology in the late 1960s. He taught at Princeton from 1966 to 2004.

Hubbard, the top-ranking information technology administrator at the Georgia Institute of Technology, will join the University in January.

Lisk taught biology at Princeton for 30 years before transferring to emeritus status in 1990.

Join the Study Abroad team at Princeton to learn about undergraduate summer study abroad opportunities!

Exhibition co-curated by Princeton professor Deana Lawson and Michael Famighetti, editor-in-chief of Aperture magazine. Featuring work by 23 artists who explore the poetics of photography, its instability, and its latent potential. Hurley Gallery open daily 10 AM - 8 PM. Gallery closed 11/28-12/1 for Thanksgiving; reopens 12/2-5.

Exhibition co-curated by Princeton professor Deana Lawson and Michael Famighetti, editor-in-chief of Aperture magazine. Featuring work by 23 artists who explore the poetics of photography, its instability, and its latent potential. Hurley Gallery open daily 10 AM - 8 PM.

Men's Ice Hockey vs Ohio State

Exhibition co-curated by Princeton professor Deana Lawson and Michael Famighetti, editor-in-chief of Aperture magazine. Featuring work by 23 artists who explore the poetics of photography, its instability, and its latent potential. Hurley Gallery open daily 10 AM - 8 PM.

Men's Ice Hockey vs Ohio State

Exhibition co-curated by Princeton professor Deana Lawson and Michael Famighetti, editor-in-chief of Aperture magazine. Featuring work by 23 artists who explore the poetics of photography, its instability, and its latent potential. Hurley Gallery open daily 10 AM - 8 PM.

Learn the fundamentals of finance in at our accessible and engaging lectures! Whether you want to get prepared for finance recruiting or just are curious about investing, our sessions will give you a technical education and an understanding of how investing works. Tiger Investments is Princeton’s oldest investment club. As conveyed by our mission statement, financial education rooted in fundamental analysis and equity research are at the heart of our organization. Our curriculum can be found here https://tigerinvestments.princeton.edu/education/

Exhibition co-curated by Princeton professor Deana Lawson and Michael Famighetti, editor-in-chief of Aperture magazine. Featuring work by 23 artists who explore the poetics of photography, its instability, and its latent potential. Hurley Gallery open daily 10 AM - 8 PM.

Exhibition co-curated by Princeton professor Deana Lawson and Michael Famighetti, editor-in-chief of Aperture magazine. Featuring work by 23 artists who explore the poetics of photography, its instability, and its latent potential. Hurley Gallery open daily 10 AM - 8 PM. Gallery closed 11/28-12/1 for Thanksgiving; reopens 12/2-5.

Exhibition co-curated by Princeton professor Deana Lawson and Michael Famighetti, editor-in-chief of Aperture magazine. Featuring work by 23 artists who explore the poetics of photography, its instability, and its latent potential. Hurley Gallery open daily 10 AM - 8 PM. Gallery closed 11/28-12/1 for Thanksgiving; reopens 12/2-5.