In addition to EV batteries being reused in 7-11 stores, their minerals can also provide many raw materials needed to run our world.

The post Old Electric Vehicle Batteries Can Be Recycled into New Sources of Energy—Even Used to Power 7-11 Stores appeared first on Good News Network.

Sydney, 10, and her mom animated a kid video to suggests how schools can donate surplus protection equipment (PPE) during COVID-19 pandemic.

The post 10-Year-Old Seeks to Empower Other Kids During COVID-19 Pandemic appeared first on Good News Network.

Using CSS3 to produce a circular menu with petals on a flower.

Coal is the primary fuel source for electrical power generation in interior Alaska, with more than 600,000 tons burned annually at five different power plants. Woody biomass could be used as part of this fuel mix, offering potential environmental and economic benefits. In this research, debarked chips were cofired with locally mined coal at the Aurora Power Plant facility in downtown Fairbanks, Alaska. During two days of testing, aspen chips were successfully cofired with coal at average rates of 2.4 percent and 4.8 percent of total energy value. Combustion gases were analyzed during combustion of 100- percent coal, as well as at two different blends with aspen chips, for levels of carbon dioxide, carbon monoxide, oxygen, and nitrogen compounds. Carbon monoxide was suggested as the combustion gas most influenced by changes in woody biomass blend rate. The potential logistic and operational challenges when cofiring were also observed. Cofiring biomass at low levels in grate-combustion systems could be performed with relative ease, with only minor impacts on plant operations, including fuel storage, handling, and performance.

It's a relatively simple process to add some flair to your blog comments these days. I want to look at 6 of the best free tools and give you a quick overview of the benefits of each. Let's start with one you've likely heard of before...

For the first time, it seems, the entire world knows what it’s like to live inside my head.

For the first time, it seems, the entire world knows what it’s like to live inside my head.

Solar power is a free natural source of energy from up above, it's a gift of God, we call it the sun and it is for everyone to use. Solar cost may be much lower than you might expect.

One of the challenges of coding premium WordPress themes is the unpredictable nature of how they will be used. Compared to coding a custom website, especially one using static HTML documents where you have complete control over the markup, you have to solve problems creatively and ensure flexibility. In these cases, CSS selectors make all […]

The post The Power of CSS Selectors and How to Use Them appeared first on Web Designer Wall.

Google developer advocate Paul Kinlan has detailed his recent work on a lightweight sharing facility using a very simple intent share protocol. Web Intents began life in 2010. Now, Kinlan and company are looking for feedback. Basically, his intent tag is intended to allow users to more easily mix and match favorite plug-in capabilities, freeing Read the rest...

For the first time, it seems, the entire world knows what it’s like to live inside my head.

In this paper, we derive a formula for the sums of powers of the first $n$ positive integers that involves the hyperharmonic numbers and the Stirling numbers of the second kind. Then, using an explicit representation for the hyperharmonic numbers, we generalize this formula to the sums of powers of an arbitrary arithmetic progression. Moreover, as a by-product, we express the Bernoulli polynomials in terms of the hyperharmonic polynomials and the Stirling numbers of the second kind.

We identify the structure of the lexicographically least word avoiding 5/4-powers on the alphabet of nonnegative integers. Specifically, we show that this word has the form $p au(varphi(z) varphi^2(z) cdots)$ where $p, z$ are finite words, $varphi$ is a 6-uniform morphism, and $ au$ is a coding. This description yields a recurrence for the $i$th letter, which we use to prove that the sequence of letters is 6-regular with rank 188. More generally, we prove $k$-regularity for a sequence satisfying a recurrence of the same type.

Monitoring users on large computing platforms such as high performance computing (HPC) and cloud computing systems is non-trivial. Utilities such as process viewers provide limited insight into what users are running, due to granularity limitation, and other sources of data, such as system call tracing, can impose significant operational overhead. However, despite technical and procedural measures, instances of users abusing valuable HPC resources for personal gains have been documented in the past cite{hpcbitmine}, and systems that are open to large numbers of loosely-verified users from around the world are at risk of abuse. In this paper, we show how electrical power consumption data from an HPC platform can be used to identify what programs are executed. The intuition is that during execution, programs exhibit various patterns of CPU and memory activity. These patterns are reflected in the power consumption of the system and can be used to identify programs running. We test our approach on an HPC rack at Lawrence Berkeley National Laboratory using a variety of scientific benchmarks. Among other interesting observations, our results show that by monitoring the power consumption of an HPC rack, it is possible to identify if particular programs are running with precision up to and recall of 95\% even in noisy scenarios.

Cognitive radio is a promising technology to improve spectral efficiency. However, the secure performance of a secondary network achieved by using physical layer security techniques is limited by its transmit power and channel fading. In order to tackle this issue, a cognitive unmanned aerial vehicle (UAV) communication network is studied by exploiting the high flexibility of a UAV and the possibility of establishing line-of-sight links. The average secrecy rate of the secondary network is maximized by robustly optimizing the UAV's trajectory and transmit power. Our problem formulation takes into account two practical inaccurate location estimation cases, namely, the worst case and the outage-constrained case. In order to solve those challenging non-convex problems, an iterative algorithm based on $mathcal{S}$-Procedure is proposed for the worst case while an iterative algorithm based on Bernstein-type inequalities is proposed for the outage-constrained case. The proposed algorithms can obtain effective suboptimal solutions of the corresponding problems. Our simulation results demonstrate that the algorithm under the outage-constrained case can achieve a higher average secrecy rate with a low computational complexity compared to that of the algorithm under the worst case. Moreover, the proposed schemes can improve the secure communication performance significantly compared to other benchmark schemes.

By Jeff Mulhollem Penn State News The first harvest of 34 acres of fast-growing shrub willow from a Penn State demonstration field this winter is a milestone in developing a sustainable biomass supply for renewable energy and bio-based economic development, … Continue reading →

By Energy.Gov Annual reports analyzing the wind energy industry released today by the Energy Department show continued rapid growth in wind power installations in 2015, demonstrating market resilience and underscoring the vitality of the U.S. wind energy market on a … Continue reading →

[IMAGE-1] I started sobbing from the opening moments of A Beautiful Day in the Neighborhood, and I didn't stop crying for two hours. And then after I left the cinema and ran into a fellow film critic who had also just seen it, I literally could not manage a word of discussion without bursting into tears again.…

[IMAGE-1] I honestly don't know how people like Bryan Stevenson keep up the fight. Just Mercy is the true origin story of a literal social justice warrior, a Harvard-educated lawyer who, in the late 1980s, launched the Equal Justice Initiative in Montgomery, Alabama, to take on the neediest, most desperate cases.…

Growing up, Luke Parker played sports.…

The present invention relates to a solid composition containing calcium silicate hydrate and at least one water-swellable polymer which can form a hydrogel, and also to a process for preparing the composition, to the use thereof as a setting accelerator, and as a grinding aid in cement production. It also relates to building material mixtures which comprise the compositions.

The invention relates to glasses for use in solid laser applications, particularly short-pulsed, high peak power laser applications. In particular, the invention relates to a method for broadening the emission bandwidth of rare earth ions used as lasing ions in solid laser glass mediums, especially phosphate-based glass compositions, using Nd and Yb as co-dopants. The invention further relates to a laser system using a Nd-doped and Yb-doped phosphate laser glass, and a method of generating a laser beam pulse using such a laser system.

The invention relates to powder comprising at least one element M, at least one element A and at least one element X, in the respective proportions (n+1±ε1), 1±ε2 and n±ε3, in which: A is chosen from Cd, Al, Ga, In, Tl, Si, Ge, Sn, Pb, P, As and S;M is a transition metal;X is chosen from B, C and N;n is an integer equal to 1, 2 or 3; andε1, ε2 and ε3 independently represent a number ranging from 0 to 0.2, said powder having a mean particle size of less than 500 nm.

The invention is directed to a pulverulent compound of the formula NiaM1bM2cOx(OH)y where M1 is at least one element selected from the group consisting of Fe, Co, Zn, Cu and mixtures thereof, M2 is at least one element selected from the group consisting of Mn, Al, Cr, B, Mg, Ca, Sr, Ba, Si and mixtures thereof, 0.3≦a≦0.83, 0.1≦b≦0.5, 0.01≦c≦0.5, 0.01≦x≦0.99 and 1.01≦y≦1.99, wherein the ratio of tapped density measured in accordance with ASTM B 527 to the D50 of the particle size distribution measured in accordance with ASTM B 822 is at least 0.2 g/cm3·μm. The invention is also directed to a method for the production of the pulverulent compound and the use as a precursor material for producing lithium compounds for use in lithium secondary batteries.

The invention relates to a granulated powder intended, in particular, for the production of ceramic sintered parts, said powder having the following chemical weight composition, based on dry matter, namely: a zirconia stabiliser selected from the group containing Y2O3, Sc2O3, MgO, CaO, CeO2, and mixtures thereof, the weight content of stabiliser, based on the total zirconia and stabiliser content, being between 2% and 20% and the MgO+CaO content being less than 5% based on the total zirconia and stabiliser content; at least 1% of a first binder having a glass transition temperature less than or equal to 25° C.; 0-4% of an additional binder having a glass transition temperature greater than 25° C.; 5-50% alumina; 0-4% of a temporary additive different from the first binder and the additional binder, the total content of the first binder, the additional binder and the temporary additive being less than 9%; less than 2% impurities; and ZrO2 to make up 100%. According to the invention, the median diameter D50 of the powder is between 80 and 130 μm, the percentile D99.5 is less than 500 μm and the relative density of the granules is between 30% and 60%.

Provided is a thermosetting resin composition including an inorganic filler and a thermosetting resin matrix component, in which the inorganic filler includes secondary sintered particles each formed of primary particles of scaly boron nitride, and at least some of the secondary sintered particles each have a maximum cavity diameter of 5 μm to 80 μm. The thermosetting resin composition can be used for providing a heat conductive sheet in which electrical insulation property is kept by controlling where the defects such as voids and cracks occur and their size, and which has excellent heat conductivity.

A barrel shifter uses a sign magnitude to 2's complement converter to generate decoder signals for its cascaded multiplexer selectors. The sign input receives the shift direction and the magnitude input receives the shift amount. The sign magnitude to 2's complement converter computes an output result as a 2's complement of the shift amount using the shift direction as a sign input, assigns a first portion (most significant bit half) of the output result to a first decoder signal, and assigns a second portion (least significant bit half) of the output result to a second decoder signal. This encoding scheme allows the decoder circuits to be relatively simple, for example, 3-to-8 decoders for an implementation adapted to shift a 64-bit operand value rather than the 4-to-9 decoder required in a conventional barrel shifter, leading to faster operation, less area, and reduced power consumption.

A random number generation method and apparatus using a low-power microprocessor is provided. In the random number generation method, a low-power microprocessor determines whether external power is supplied to a random number generator. The low-power microprocessor updates an internal state of the random number generator based on a first scheme if it is determined that the external power is supplied to the random number generator. The low-power microprocessor updates the internal state of the random number generator based on a second scheme different from the first scheme if it is determined that the external power is not supplied to the random number generator.

In this application, a set of orthogonal functions is introduced whose power spectral densities are all rectangular shape. To find the orthogonal function set, it was considered that their spectrums (Fourier transforms of the functions) are either real-valued or imaginary-valued, which are corresponding to even and odd real-valued time domain signals, respectively. The time domain functions are all considered real-valued because they are actually physical signals. The shape of the power spectral densities of the signals are rectangular thus, the Haar orthogonal function set can be employed in the frequency domain to decompose them to several orthogonal functions. Based on the inverse Fourier transform of the Haar orthogonal functions, the time domain functions with rectangular power spectral densities can be determined. This is equivalent to finding the time-domain functions by taking the inverse Fourier transform of the frequency domain Walsh functions. The obtained functions are sampled and truncated to generate finite-length discrete signals. Truncation destroys the orthogonality of the signals. The Singular Value Decomposition method is used to restore the orthogonality of the truncated discrete signals.

The present invention provides a process for producing electret fine particles or coarse powder that can be uniformly electrified and exhibits excellent electrophoretic properties. Specifically, the present invention relates to the production processes (1) and (2) below:(1) A process for producing electret fine particles, comprising emulsifying a fluorine-containing material that contains a vinylidene fluoride-hexafluoropropylene-tetrafluoroethylene terpolymer in a liquid that is incompatible with the fluorine-containing material to obtain emulsified particles; and subjecting the emulsified particles to electron ray irradiation, radial ray irradiation, or corona discharge treatment.(2) A process for producing electret coarse powder, comprising subjecting a resin sheet containing a vinylidene fluoride-hexafluoropropylene-tetrafluoroethylene terpolymer to electron ray irradiation, radial ray irradiation, or corona discharge treatment to process the resin sheet into an electret resin sheet; and pulverizing the electret resin sheet.

A power steering device is mounted on a vehicle and includes a variable transmission ratio mechanism, a torque applying unit, and an applied friction torque changing unit. The torque applying unit sets an applied friction torque applied to the steering wheel and performs a control of applying the applied friction torque to the steering wheel. The applied friction torque changing unit changes the applied friction torque based on the transmission ratio of the variable transmission ratio mechanism.

In an electric powered vehicle in which vehicle driving force for reverse running is produced by a traction motor, vehicle driving force is set by a product of a base value set at least based on an accelerator opening and an amplification factor. The amplification factor is set at k1=1.0 during reverse running (V1.0 at the start of reverse running (V≧0) depending on the vehicular speed. The vehicle driving force at the start of reverse running can thereby be made larger than the vehicle driving force after the start of reverse running at the same accelerator opening.

Provided are a three-phase coaxial superconducting power cable and a structure thereof. A certain space is formed between adjacent superconducting wires of a superconducting layer (disposed at an outer portion) having more superconducting wires among a plurality of superconducting layers, and another wire is disposed in the space, or the superconducting wires of the respective superconducting layers are disposed to have different critical currents. Accordingly, a waste of superconducting wires is prevented, and the optimized three-phase coaxial superconducting power cable is provided.

In a mobile device, a bone conduction or vibration sensor is used to detect the user's speech and the resulting output is used as the source for a low power Voice Trigger (VT) circuit that can activate the Automatic Speech Recognition (ASR) of the host device. This invention is applicable to mobile devices such as wearable computers with head mounted displays, mobile phones and wireless headsets and headphones which use speech recognition for the entering of input commands and control. The speech sensor can be a bone conduction microphone used to detect sound vibrations in the skull, or a vibration sensor, used to detect sound pressure vibrations from the user's speech. This VT circuit can be independent of any audio components of the host device and can therefore be designed to consume ultra-low power. Hence, this VT circuit can be active when the host device is in a sleeping state and can be used to wake the host device on detection of speech from the user. This VT circuit will be resistant to outside noise and react solely to the user's voice.

A portable self contained light generating device which is powered by a flow of granular material falling under the influence of gravity to impinge upon and cause a paddle wheel to rotate thereby turning a small generator producing electricity to power one or more light emitting diodes for illumination. The device equipped with a multi-position power/illumination control switch and in some embodiments also provided with a battery providing supplemental power.

A source device to provide power through a network cable and a user device is to draw power from the network cable. A database is to store a parameter associated with the user device. The source device is to access the stored parameter based on receipt of information related to the user device and is to compare at least one of a current power drawn and an additional power requested by the user device to a power limit of the user device based on the accessed parameters. The source device is to send a power message to the user device based on the comparison, the power message to relate to an amount of the power the user device is to draw.

The disclosure discloses a power management method, for setting a power supply arrangement of an electronic device intelligently, comprising providing at least two sensors, corresponding to at least one threshold respectively; detecting a state of the electronic device for generating a detecting signal respectively; comparing the at least two detecting signals with the at least one threshold corresponding to the at least two sensors respectively; generating at least two situation signals when the at least two detecting signals meet the at least one threshold corresponding to the at least two sensors respectively; looking up a look-up table according to the at least two detecting signals for generating a control command; and writing in at least one independent bit of a register according to the control command for changing or maintaining a power supply arrangement of at least one peripheral component.

A power-saving network management server, which is coupled to a network system including a network device and manages a state of power to the network device, wherein the power-saving network management server is configured to: store network configuration information and task allocation information; determine starting or stopping of the power supply to the port of the network device based on the updated network configuration information and task allocation information; store a determination result of the starting or stopping of the power supply to the port as a port determination result; and control the power supply to the port of the network device based on the port determination result.

An energy management system has an application storage, an application executing unit, a plurality of network interfaces, a policy setting unit configured to set whether each application should be permitted to access each of the network interfaces, a policy storage configured to store identification information for each application set by the policy setting unit, and access permit/inhibit information showing whether the application is permitted to access each of the network interfaces, an I/F management unit managing a correspondence relationship between a network address and each of the network interfaces, and to specify a network interface used by the application executed by the application executing unit, and an access controller configured to judge whether the application executed by the application executing unit is permitted to access the network interface to be used thereby, based on the access permit/inhibit information stored in the policy storage.

A method and apparatus for power-efficiency management in a virtualized cluster system. The virtualized cluster system includes a front-end physical host and at least one back-end physical host, and each of the at least one back-end physical host comprises at least one virtual machine and a virtual machine manager. Flow characteristics of the virtualized cluster system are detected at a regular time cycle, then a power-efficiency management policy is generated for each of the at least one back-end physical host based on the detected flow characteristics, and finally the power-efficiency management policies are performed. The method can detect the real-time flow characteristics of the virtualized cluster system and make the power-efficiency management policies thereupon to control the power consumption of the system and perform admission control on the whole flow, thereby realizing optimal power saving while meeting the quality of service requirements.

A power controller can set the power state of a processor bridge based on which processor modules are in a communicative state. In addition, for a power state where selected processor modules are expected to be non-communicative, the power controller can set the supplied voltage to have a reduced voltage guard band as compared to other power states. These power management techniques can reduce the power consumed by the processor.

Power consumption in a microprocessor platform is managed by setting a peak power level for power consumed by a multi-core microprocessor platform executing multi-threaded applications. The multi-core microprocessor platform contains a plurality of physical cores, and each physical core is configurable into a plurality of logical cores. A simultaneous multithreading level in at least one physical core is adjusted by changing the number of logical cores on that physical core in response to a power consumption level of the multi-core microprocessor platform exceeding the peak power level. Performance and power data based on simultaneous multi-threading levels are used in selecting the physical core to be adjusted.

We report methods, integrated circuit devices, and fabrication processes relating to power management transitions of multiple compute units sharing a cache. One method includes indicating that a first compute unit of a plurality of compute units of an integrated circuit device is attempting to enter a low power state, determining if the first compute unit is the only compute unit of the plurality in a normal power state, and in response to determining the first compute unit is the only compute unit in the normal power state: saving a state of a shared cache unit of the integrated circuit device, flushing at least a portion of a cache of the shared cache unit, repeating the flushing until either a second compute unit exits the low power state or the cache is completely flushed, and permitting the first compute unit to enter the low power state.

According to an embodiment, a control system includes a detector, an estimating unit, a determining unit, and a controller. The detector detects an idle state. The estimating unit estimates an idle period. When the idle state is detected, the determining unit determines whether a first power consumption when writeback of data which needs to be written back to a main storage device is performed and supply of power to a cache memory is stopped, is larger than a second power consumption when writeback of the data is not performed and supply of power is continued for the idle period. The controller stops the supply of power to the cache memory when the first power consumption is determined to be smaller than the second power consumption and continues the supply of power when the first power consumption is determined to be larger than the second power consumption.

An SOC implements a security enclave processor (SEP). The SEP may include a processor and one or more security peripherals. The SEP may be isolated from the rest of the SOC (e.g. one or more central processing units (CPUs) in the SOC, or application processors (APs) in the SOC). Access to the SEP may be strictly controlled by hardware. For example, a mechanism in which the CPUs/APs can only access a mailbox location in the SEP is described. The CPU/AP may write a message to the mailbox, which the SEP may read and respond to. The SEP may include one or more of the following in some embodiments: secure key management using wrapping keys, SEP control of boot and/or power management, and separate trust zones in memory.

An integrated-circuit memory controller outputs to a memory device a first signal in a first state to enable operation of synchronous data transmission and reception circuits within the memory device. A transaction queue within the memory controller stores memory read and write requests that, to be serviced, require operation of the synchronous data transmission and reception circuits, respectively, within the memory device. Power control circuitry within the memory controller determines that the transaction queue has reached a predetermined state and, in response, outputs the first signal to the memory device in a second state to disable operation of the synchronous data transmission and reception circuits within the memory device.

Techniques are described to transmit commands to a display device. The commands can be transmitted in header byte fields of secondary data packets. The commands can be used to cause a target device to capture a frame, enter or exit self refresh mode, or reduce power use of a connection. In addition, a request to exit main link standby mode can cause the target enter training mode without explicit command to exit main link standby mode.

There is provided a power management apparatus including: a managed appliance registering unit carrying out authentication on an electronic appliance connected to a power network and registering an electronic appliance for which the authentication has succeeded as a managed appliance, a control unit controlling operation of the managed appliance and supplying of power to the managed appliance, a managed appliance information acquiring unit acquiring, from the managed appliance, as managed appliance information, at least any of appliance information including identification information that is unique to the electronic appliance, information indicating an operation state of the electronic appliance, information indicating an usage state of the electronic appliance and power information of the electronic appliance, and an appliance state judging unit judging a state of the managed appliance based on the managed appliance information acquired by the managed appliance information acquiring unit.

A method is disclosed for generating a mass spectrum, e.g. for Fourier transform mass spectrometry, having improved resolving power. The method includes steps of acquiring a plurality of mass spectra from a mass spectrometer using image current detection determining the centroids of at least some of the peaks which have a sufficient signal-to-noise (S/N) ratio so that the variation of the centroid of each such peak from the plurality of mass spectra is significantly lower than the full-width at half-maximum, dM, of the peak in the m/z domain; and generating a histogram of the centroids determined from the plurality of acquired mass spectra thereby forming a composite mass spectrum. The resultant composite mass spectrum comprises peaks having full-width at half-maximum, dMC, significantly narrower than the peak width, dM, of the corresponding peaks in the plurality of acquired mass spectra.

A method for calculating efficiency of a power supply system includes: displaying a parameter selection interface on the display unit for selecting power supply parameters and transmission line parameters. Obtaining power supply parameters and transmission line parameters selected by the user via the parameter selection interface when determining the user has finished the selection. Determining a efficiency of a selected power supply of the power supply parameters according to the relationship table, and calculating a sum efficiency according to the obtained power supply parameters and the transmission line parameters and the efficiency of the selected power supply. And calculating a total efficiency of the power supply system according to each sum efficiency when determining that all of the power supplies of the power supply system have been selected.