For almost 40 years, Art and Nan Kellam lived off-grid on a Maine island, eschewing modern technology, but not each other.

The UP North Loop offers a unique but daunting tour through an array of wild landscapes.

Last year, they successfully hiked the entire Appalachian Trail when their daughter was just a baby.

Former Hell's Angel Tim Medvetz plays the role of motivational 'bus driver' to a group of unlikely adventurers.

A couple disappeared into mountain silence for 18 months as part of the first substantial study on the physical and emotional impacts of meditation.

A new study from the University of Tennessee looks at the multitude of ways and topics married couples argue about, with some not-so-surprising results.

John and Charlotte Henderson are celebrating their 80th wedding anniversary this month at a nursing home in Texas.

Galgopod creates a lifeline for some of the world's most tragic dogs.

Aditya and Poonam Singh are turning barren farmland in Rajasthan, India, into an unofficial tiger reserve.

Big, efficient cities. High-tech mega farms. And a new generation of nuclear power. That's how to save nature, says a new manifesto.

Flexible System Can Be Achieved with Highspeed, High-precision Remote I/O for EtherCAT(NX-ECC)

Product Information

Connecting to open industrial network standard EtherNet/IP(NX-EIC202)

New York City's swinger scene is the largest in the country, with a whopping 18,202 active members and 4,875 couples. Los Angeles and Houston are close seconds and thirds with 2,577 and 2,101 couple members respectively.

The award recognizes wedding professionals who demonstrate excellence in quality, service, responsiveness, and professionalism

The award, based on reviews by couples on WeddingWire, recognizes top wedding professionals in the United States who demonstrate excellence in quality, service, responsiveness, and professionalism

Jennifer Petriglieri, an assistant professor of organizational behavior at INSEAD, asks company leaders to consider whether they really need to relocate their high-potential employees or make them travel so much. She says moving around is particularly hard on dual-career couples. And if workers can't set boundaries around mobility and flexibility, she argues, firms lose out on talent. Petriglieri is the author of the HBR article “Talent Management and the Dual-Career Couple.”

A former Dublin, Ohio, couple has been charged with crimes related to stealing exosome-related trade secrets concerning the research, identification and treatment of a range of pediatric medical conditions announced Assistant Attorney General John C. Demers of National Security, U.S. Attorney Benjamin C. Glassman for the Southern District of Ohio, Assistant Director John Brown of the Counterintelligence division and FBI Special Agent in Charge Todd Wickerham of the Cincinnati division.

The Newtons have created ‘Britain’s best garden’ and grown a spring spectacular bursting with color in Walsall after spending lockdown tending their oasis.

The post Britain’s Best Gardening Couple Outdo Themselves With Spring Spectacular After Spending Lockdown Tending Their Oasis appeared first on Good News Network.

In this work we consider the initial-value problem associated with a coupled system of generalized Korteweg-de Vries equations. We present a relationship between the best constant for a Gagliardo-Nirenberg type inequality and a criterion for the existence of global solutions in the energy space. We prove that such a constant is directly related to the existence problem of solitary-wave solutions with minimal mass, the so called ground state solutions. To guarantee the existence of ground states we use a variational method.

This paper deals with an optimal control problem associated to the Kuramoto model describing the dynamical behavior of a network of coupled oscillators. Our aim is to design a suitable control function allowing us to steer the system to a synchronized configuration in which all the oscillators are aligned on the same phase. This control is computed via the minimization of a given cost functional associated with the dynamics considered. For this minimization, we propose a novel approach based on the combination of a standard Gradient Descent (GD) methodology with the recently-developed Random Batch Method (RBM) for the efficient numerical approximation of collective dynamics. Our simulations show that the employment of RBM improves the performances of the GD algorithm, reducing the computational complexity of the minimization process and allowing for a more efficient control calculation.

Miller and Sheffield introduced a notion of an imaginary surface as an equivalence class of pairs of simply connected proper subdomains of $mathbb{C}$ and Gaussian free fields (GFFs) on them under conformal equivalence. They considered the situation in which the conformal transformations are given by a chordal Schramm--Loewner evolution (SLE). In the present paper, we construct processes of GFF on $mathbb{H}$ (the upper half-plane) and $mathbb{O}$ (the first orthant of $mathbb{C}$) by coupling zero-boundary GFFs on these domains with stochastic log-gases defined on parts of boundaries of the domains, $mathbb{R}$ and $mathbb{R}_+$, called the Dyson model and the Bru--Wishart process, respectively, using multiple SLEs evolving in time. We prove that the obtained processes of GFF are stationary. The stationarity defines an equivalence relation between GFFs, and the pairs of time-evolutionary domains and stationary processes of GFF will be regarded as generalizations of the imaginary surfaces studied by Miller and Sheffield.

The characterization of phase dynamics in coupled oscillators offers insights into fundamental phenomena in complex systems. To describe the collective dynamics in the oscillatory system, order parameters are often used but are insufficient for identifying more specific behaviors. We therefore propose a topological approach that constructs quantitative features describing the phase evolution of oscillators. Here, the phase data are mapped into a high-dimensional space at each time point, and topological features describing the shape of the data are subsequently extracted from the mapped points. We extend these features to time-variant topological features by considering the evolution time, which serves as an additional dimension in the topological-feature space. The resulting time-variant features provide crucial insights into the time evolution of phase dynamics. We combine these features with the machine learning kernel method to characterize the multicluster synchronized dynamics at a very early stage of the evolution. Furthermore, we demonstrate the usefulness of our method for qualitatively explaining chimera states, which are states of stably coexisting coherent and incoherent groups in systems of identical phase oscillators. The experimental results show that our method is generally better than those using order parameters, especially if only data on the early-stage dynamics are available.

A High Performance Computing (HPC) node comprises a motherboard, a switch comprising eight or more ports integrated on the motherboard, and at least two processors operable to execute an HPC job, with each processor communicably coupled to the integrated switch and integrated on the motherboard.

The coupled resonator comprises a first low frequency resonator, such as a balance spring (1) and a second higher frequency resonator, such as a tuning fork (2), the two resonators (1 and 2) including permanent mechanical coupling means. Application to the regulating system of a timepiece.

An isolating decoupler comprising a shaft, a pulley journalled to the shaft, a torsion spring engaged with the pulley, a wrap spring frictionally engageable with the shaft, the torsion spring and wrap spring connected in series such that each is torsionally loaded in a winding direction, the wrap spring comprising a variable cross-section having a first cross sectional dimension and a second cross sectional dimension, and the wrap spring temporarily releasable from the shaft in an overtorque condition by contact with the pulley urging the wrap spring in an unwinding direction.

In one aspect, the invention is directed to a decoupler assembly for between an endless drive element and a shaft. The endless drive element may be, for example, an accessory drive belt from a vehicular engine. The shaft may be, for example, the input shaft of a belt-driven accessory, such as an alternator or a compressor. The decoupler assembly includes a hub that mounts to the shaft, a pulley that is rotatable with respect to the hub, a dampening spring and a clutch member. A part of the pulley is supported on a pulley support surface on the hub. There is a gap between the pulley and the pulley support surface. The gap has lubricant therein to facilitate sliding between the pulley and the pulley support surface. By eliminating the use of a polymeric bushing between pulley and the hub, there are several advantages that are provided.

An unload auger assembly for a combine harvester includes a drive coupler configured between adjacent first and second auger segments. The coupler includes a driver component and associated driver cog coupled to the first auger segment. A driven component and associated driven cog is coupled to the second auger segment. The driven cog is rotationally engaged by the driver cog to transmit rotational drive from the first auger segment to the second auger segment. A friction clutch is configured in-line between the driver component and driven component and rotationally couples the driver component to the driven up to a release torque value wherein the friction clutch disengages the driver component from the driven component.

The disclosed embodiments provide a battery pack for use with a portable electronic device. The battery pack includes a first set of cells with different capacities electrically coupled in a parallel configuration. Cells within the first set of cells may also have different thicknesses and/or dimensions. The first set of cells is arranged within the battery pack to facilitate efficient use of space within a portable electronic device. For example, the first set of cells may be arranged to accommodate components in the portable electronic device.

A cable assembly for electronic devices such as cellular telephones and music devices is disclosed. The cable assembly can comprise either one or two earpieces, each of which is configured to be received into the concha of a user's ear. The earpiece(s) can be configured so as to be held in place by at least one anatomical structure of the concha. A speaker can be in acoustic communication with each earpiece. A cable can be configured to communicate a signal representative of sound from the electronic device to each earpiece. A microphone can be permanently attached or removably attachable to the cable to facilitate use with a cellular telephone. The cable assembly can facilitate hands free operation of a cellular telephone and can facilitate listening to a music device. Other implementations and related methods are also disclosed.

The present invention provides an apparatus for enhancing Q factor of an inductor. The apparatus includes a negative resistance generator coupled to the inductor for providing a negative resistance, and a bias circuit coupled to the negative resistance generator for biasing the negative resistance generator.

A directional coupler includes in a laminate block, a first main line, a first sub-line, a second sub-line, and a second main line sequentially provided in a lamination direction of layers. Further, each of the first main line, the first sub-line, the second sub-line, and the second main line is divided into at least two divided coil conductors. Furthermore, at least two divided ground conductors are provided between the first sub-line and the second sub-line.

A three dimensional (3D) branchline coupler using through silicon vias (TSV), methods of manufacturing the same and design structures are disclosed. The method includes forming a first waveguide structure in a first dielectric material. The method further includes forming a second waveguide structure in a second dielectric material. The method further includes forming through silicon vias through a substrate formed between the first dielectric material and the second dielectric material, which connects the first waveguide structure to the second waveguide structure.

Disclosed is a coupler comprising a first structure, a first shaft rotatably supported by the first structure, a second structure supporting the first structure, and a moving device configured to move the first structure relative to the second structure.

A method is disclosed for controlling at least one machining device which is coupled to a machine tool by means of an encoder signal, the machine tool having at least one motion control device. In order to improve the accuracy of the encoder connection, at least one additional variable which characterizes the transport is digitally transmitted from the motion control device to the at least one machining device and is used to correct the encoder signal.

This disclosure relates generally to radio frequency (RF) amplification devices and methods of limiting an RF signal current. Embodiments of the RF amplification device include an RF amplification circuit and a feedback circuit. The RF amplification circuit is configured to amplify an RF input signal so as to generate an amplified RF signal that provides an RF signal current with a current magnitude. The feedback circuit is used to limit the RF signal current. In particular, a thermal sense element in the feedback circuit is configured to generate a sense current, and thermal conduction from the RF amplification circuit sets a sense current level of the sense current as being indicative of the current magnitude of the RF signal current. To limit the RF signal current, the feedback circuit decreases the current magnitude of the RF signal current in response to the sense current level reaching a trigger current level.

A sensor coupler adapted to operatively connect a sensor to a piston-cylinder assembly. The sensor coupler includes a first end member and a second end member. The first end member is disposed on a port of the piston-cylinder assembly, in communication with the sensor, and the second end member is disposed in a cylinder chamber of the piston-cylinder assembly. Further, one or more cables are extending between the first end member and the second end member. The one or more cables are configured to transmit signals indicative of a position of a piston in the piston-cylinder assembly to the sensor. The sensor coupler further includes a biasing member to connect the first end member and the second end member.

This invention consists of a coupling device by means of which the shafts of a sulky used in harness horse racing can be quickly and easily attached to or detached from the harness of the horse. It consists primarily of a metal framework, which is part of the harness, into which is inserted the end of each shaft wherein it is held by a spring loaded pin which passes through the framework and the free end of the shaft. The shaft is released simply by pulling the pin out of the shaft end; when released, the pin returns to the locking position until it is pulled up again to reinsert the shaft.

A coupler body for a railcar coupler, said coupler body comprising at least one central datum feature that does not wear during coupler use.

An adapter coupler (1) for adapting couplings of different design, wherein the adapter coupler (1) comprises a first connecting mechanism for releasably connecting the adapter coupler (1) to a first coupling, a second connecting mechanism for releasably connecting the adapter coupler (1) to the drawhook (50) of a second coupling, and a coupler housing (2) for connecting the first connecting mechanism to the second connecting mechanism, and wherein the second connecting mechanism comprises a tension yoke (8) with which to engage with the drawhook (50) of the second coupling. The adapter coupler (1) having a mechanism for height centering, comprising a drawbar eye (14) connected to the coupler housing (2), wherein the drawbar eye (14) is arranged and configured relative the tension yoke (8) such that upon the adapter coupler (1) being inserted into the jaw of the drawhook (50) of the second coupling, the drawhook (50) can engage in one joint process with both the accommodation formed by the tension yoke (8) as well as with the drawbar eye (14).

A mating cam coupler device includes a coupler head having a first lateral portion and a second lateral portion. A male cam is associated with the first lateral portion. A male cam locking mechanism is disposed within the first lateral portion and is operably connected with the male cam. A female cam is associated with the second lateral portion. A female cam locking mechanism is disposed within the second lateral portion and is operably connected with the female cam. The male cam is positioned to engage the female cam of an opposing coupler and the female cam is positioned to engage the male cam of the opposing coupler and operation of the male cam locking mechanism is triggered by engagement of the male cam with the opposing female cam and operation of the female cam locking mechanism is triggered by engagement of the female cam with the opposing male cam.

A finger core for forming the front part of a knuckle for a railcar, said finger core comprising a single opening to form a single rib at the horizontal center line of the resulting knuckle.

A method for casting a thrower for a railcar coupler includes creating a mold box that is vertically parted in halves, each half defining a side of a thrower cavity and that includes at least a portion of a sprue at a location above the thrower cavity, the thrower cavity also being oriented vertically; pouring molten metal into the mold box through the sprue and into the thrower cavity while the mold is oriented vertically; and shaking out the mold box to release the thrower after the thrower has cooled. Creating the mold box may be executed through a cold shell process. The halves of the mold box may include reflective images of the sides of two thrower cavities and an ingate connected between the sprue and one of the two thrower cavities.

A coupler yoke and a coupler draft gear are used in the field of carriages of a railway and aim at solving the problems of lower strength, low safety and reliability and the like in the prior art. The coupler yoke comprises a hollow yoke body with the cross section being in a long concentric-square shape, the inner side surface of the one end of the hollow yoke body is a bearing surface, and at least part of the heavy loading area of the bearing surface protrudes outwards relatively to the end surface of the light loading area. The coupler yoke is used for connecting couplers between the carriages of a train, so that the carriages are connected to form the train for transmitting the tractive force in the transportation; the distribution pattern of the existing bearing surface is changed due to the arrangement of a middle groove.

A core assembly for forming the interior spaces of a railcar coupler knuckle has a first transition section between the C-10 portion of the core and the finger portion of the core. The first transition section has a first side, a second side, a third side and a fourth side and the first and second sides form the vertical axis of the first transition section and the third and fourth sides form the horizontal axis of said first transition section. The vertical axis of the first transition section has a height along a horizontal plane of the vertical axis of at least 2.5″ and the horizontal axis of said first transition section has a width along a vertical plane of the horizontal axis of at least 0.925″.

An energy absorbing coupler for railway vehicles includes a coupler anchor, a coupler mechanism supported to the coupler anchor by a deformation tube and draft gear element, and a plurality of energy absorbing devices associated with the coupler anchor. The energy absorbing devices each include two mating components in frictional engagement with one another. Sliding movement between contacting surfaces of the two components occurs when energy is applied to the coupler mechanism, thereby creating friction and dissipating the applied energy at least in part in the form of heat. The two mating components may include a male part, such as a mounting bolt, in mating engagement within a female part, such as a collar. An inside diameter of the collar may be slightly smaller than an outside diameter of the mounting bolt to create a press-fit engagement.

A method for manufacturing a railcar coupler knuckle includes providing a first mold section having internal walls defining at least in part perimeter boundaries of a first coupler knuckle mold cavity. The method includes providing a second mold section having internal walls defining at least in part perimeter boundaries of a second coupler knuckle mold cavity. The second coupler mold cavity of the second mold section is offset from the first coupler mold cavity of the first mold section. The method includes closing the first and second mold sections and at least partially filling the first and second coupler knuckle mold cavities with a molten alloy, the molten alloy solidifying after filling to form the coupler knuckle.

A model railroad car coupler assembly comprises a coupler with an upper shank having a coupler knuckle at a distal portion and a flat proximal portion, a lower shank having a coupler thumb at a distal portion and a flat proximal portion, and a coil spring terminating in first and second end portions, with a first turn of the coupler spring interlocked with the upper shank and a second turn interlocked with the lower shank. A mounting box has a circular mounting post that accepts circular openings in the shanks permitting them to rotate relative to each other between a closed coupled position and an open uncoupling position. The spring end portions engage the mounting box to bias the shanks into their coupled position. The knuckle carries a ferrous actuating pin that cooperates with a magnetic pad along a track to rotate the upper shank into its open position.

A method of casting a core includes the steps of preparing a first half of a corebox, preparing a second half of a corebox such that the parting line of a core formed from the first and second coreboxes runs along the vertical axis of the core.

An improved coupler body having an area of increased material in the upper lock chamber.