Understanding the structure–property relationship in electrocatalysts under working conditions is crucial for the rational design of novel and improved catalytic materials. This paper presents the Aarhus University reactor for electrochemical studies using X-rays (AUREX) operando electrocatalytic flow cell, designed as an easy-to-use versatile setup with a minimal background contribution and a uniform flow field to limit concentration polarization and handle gas formation. The cell has been employed to measure operando total scattering, diffraction and absorption spectroscopy as well as simultaneous combinations thereof on a commercial silver electrocatalyst for proof of concept. This combination of operando techniques allows for monitoring of the short-, medium- and long-range structure under working conditions, including an applied potential, liquid electrolyte and local reaction environment. The structural transformations of the Ag electrocatalyst are monitored with non-negative matrix factorization, linear combination analysis, the Pearson correlation coefficient matrix, and refinements in both real and reciprocal space. Upon application of an oxidative potential in an Ar-saturated aqueous 0.1 M KHCO3/K2CO3 electrolyte, the face-centered cubic (f.c.c.) Ag gradually transforms first to a trigonal Ag2CO3 phase, followed by the formation of a monoclinic Ag2CO3 phase. A reducing potential immediately reverts the structure to the Ag (f.c.c.) phase. Following the electrochemical-reaction-induced phase transitions is of fundamental interest and necessary for understanding and improving the stability of electrocatalysts, and the operando cell proves a versatile setup for probing this. In addition, it is demonstrated that, when studying electrochemical reactions, a high energy or short exposure time is needed to circumvent beam-induced effects.

Here, it is investigated how optical properties of single scatterers in interacting multi-particle systems influence measurable structure factors. Both particles with linear gradients of their scattering length density and core–shell structures evoke characteristic deviations between the weighted sum 〈S(Q)〉 of partial structure factors in a multi-component system and experimentally accessible measurable structure factors SM(Q). While 〈S(Q)〉 contains only the structural information of self-organizing systems, SM(Q) is additionally influenced by the optical properties of their constituents, resulting in features such as changing amplitudes, additional peaks in the low-wavevector region or splitting of higher-order maxima, which are not related to structural reasons. It is shown that these effects can be systematically categorized according to the qualitative behaviour of the form factor in the Guinier region, which enables assessing the suitability of experimentally obtained structure factors to genuinely represent the microstructure of complex systems free from any particular model assumption. Hence, a careful data analysis regarding size distribution and optical properties of single scatterers is mandatory to avoid a misinterpretation of measurable structure factors.

The two most abundant CaCO3 polymorphs, calcite and aragonite, are universally recognized for the richness of their morphology to which different twins make relevant contributions. The epitaxial transformation calcite ↔ aragonite has long been debated. While the twinning has been thoroughly treated, the homo-epitaxy occurring within each of these minerals has, inexplicably, been overlooked to date, both experimentally and theoretically. Twinning can be deceptive to the point where it can be mistaken for homo-epitaxy, thus making the proposed growth mechanism in the crystal aggregate wrong. Within the present work, the first aim is a theoretical investigation of the homo-epitaxies among the three {10.4}-cleavage, {01.2}-steep and {01.8}-flat rhombohedra of calcite. Accordingly, the specific adhesion energies were calculated between facing crystal forms, unequivocally showing that the {01.2}/{01.8} homo-epitaxy competes with the generation of both {01.2} and {01.8} contact twins. Secondly, the calculation of the specific adhesion energy was extended to consider homo-epitaxy for the {10.4} rhombohedron. The two-dimensional geometric lattice coincidence has been tried for the {00.1} pinacoidal form as well.

Here, a morphologically based approach is used for the in situ characterization of 3D growth rates of facetted crystals from the solution phase. Crystal images of single crystals of the β-form of l-glutamic acid are captured in situ during their growth at a relative supersaturation of 1.05 using transmission optical microscopy. The crystal growth rates estimated for both the {101} capping and {021} prismatic faces through image processing are consistent with those determined using reflection light mode [Jiang, Ma, Hazlehurst, Ilett, Jackson, Hogg & Roberts (2024). Cryst. Growth Des. 24, 3277–3288]. The growth rate in the {010} face is, for the first time, estimated from the shadow widths of the {021} prismatic faces and found to be typically about half that of the {021} prismatic faces. Analysis of the 3D shape during growth reveals that the initial needle-like crystal morphology develops during the growth process to become more tabular, associated with the Zingg factor evolving from 2.9 to 1.7 (>1). The change in relative solution supersaturation during the growth process is estimated from calculations of the crystal volume, offering an alternative approach to determine this dynamically from visual observations.

Slow-cooled CF8M duplex stainless steel is used for critical parts of the primary coolant pipes of nuclear reactors. This steel can endure severe service conditions, but it tends to become more brittle upon very long-term aging (tens of years). Therefore, it is essential to understand its specific microstructure and temporal evolution. As revealed by electron backscatter diffraction (EBSD) analyses, the microstructure consists of millimetre-scale ferritic grains within which austenite lath packets have grown with preferred crystallographic orientations concerning the parent ferritic phase far from the ferrite grain boundaries. In these lath packets where the austenite phase is nucleated, the lath morphology and crystal orientation accommodate the two ferrite orientations. Globally, the Pitsch orientation relationship appears to display the best agreement with the experimental data compared with other classical relationships. The austenite lath packets are parallel plate-shaped laths, characterized by their normal n. A novel methodology is introduced to elucidate the expected relationship between n and the crystallographic orientation given the coarse interfaces, even though n is only partly known from the observation surface, in contrast to the 3D crystal orientations measured by EBSD. The distribution of retrieved normals n is shown to be concentrated over a set of discrete orientations. Assuming that the ferrite and austenite obey the Pitsch orientation relationship, the determined lath normals are close to an invariant direction of the parent phase given by the same orientation relationship.

Using a 5 µm-diameter X-ray beam, we collected scanning X-ray microdiffraction in both the small-angle (SAXS) and the wide-angle (WAXS) regimes from thin sections of fixed human brain tissue from Alzheimer's subjects. The intensity of scattering in the SAXS regime of these patterns exhibits essentially no correlation with the observed intensity in the WAXS regime, indicating that the structures responsible for these two portions of the diffraction patterns, which reflect different length scales, are distinct. SAXS scattering exhibits a power-law behavior in which the log of intensity decreases linearly with the log of the scattering angle. The slope of the log–log curve is roughly proportional to the intensity in the SAXS regime and, surprisingly, inversely proportional to the intensity in the WAXS regime. We interpret these observations as being due to the presence of sub-micrometre-sized voids formed during dehydration of the fixed tissue. The SAXS intensity is due largely to scattering from these voids, while the WAXS intensity derives from the secondary structures of macromolecular material surrounding the voids. The ability to detect and map the presence of voids within thin sections of fixed tissue has the potential to provide novel information on the degradation of human brain tissue in neurodegenerative diseases.

We describe an ultra-compact setup for in situ X-ray diffraction on the inelastic X-ray scattering beamline ID20 at the European Synchrotron Radiation Facility. The main motivation for the design and construction of this setup is the increasing demand for on-the-fly sample characterization, as well as ease of navigation through a sample's phase diagram, for example subjected to high-pressure and/or high-temperature conditions. We provide technical details and demonstrate the performance of the setup.

Here, a recently commissioned five-analyzer Johann spectrometer at the Inner Shell Spectroscopy beamline (8-ID) at the National Synchrotron Light Source II (NSLS-II) is presented. Designed for hard X-ray photon-in/photon-out spectroscopy, the spectrometer achieves a resolution in the 0.5–2 eV range, depending on the element and/or emission line, providing detailed insights into the local electronic and geometric structure of materials. It serves a diverse user community, including fields such as physical, chemical, biological, environmental and materials sciences. This article details the mechanical design, alignment procedures and data-acquisition scheme of the spectrometer, with a particular focus on the continuous asynchronous data-acquisition approach that significantly enhances experimental efficiency.

The upgrade of the Swiss Light Source, called SLS 2.0, necessitates comprehensive updates to all 18 user front ends. This upgrade is driven by the increased power of the synchrotron beam, reduced floor space, changing source points, new safety regulations and enhanced beam properties, including a brightness increase by up to a factor of 40. While some existing front-end components are being thoroughly refurbished and upgraded for safety reasons, other components, especially those designed to tailor the new synchrotron beam, are being completely rebuilt. These new designs feature innovative and enhanced cooling systems to manage the high-power load and meet new requirements such as mechanical stability and compact footprints.

High-repetition-rate free-electron lasers impose stringent requirements on the thermal deformation of beamline optics. The Shanghai HIgh-repetition-rate XFEL aNd Extreme light facility (SHINE) experiences high average thermal power and demands wavefront preservation. To deeply study the thermal field of the first reflection mirror M1 at the FEL-II beamline of SHINE, thermal analysis under a photon energy of 400 eV was executed by fluid and solid heat transfer method. According to the thermal analysis results and the reference cooling water temperature of 30 °C, the temperature of the cooling water at the flow outlet is raised by 0.15 °C, and the wall temperature of the cooling tube increases by a maximum of 0.5 °C. The maximum temperature position of the footprint centerline in the meridian direction deviates away from the central position, and this asymmetrical temperature distribution will directly affect the thermal deformation of the mirror and indirectly affect the focus spot of the beam at the sample.

A novel in situ/operando method is introduced to measure the photon beam stability of synchrotron radiation based on orthogonal diffraction imaging of a Laue crystal/analyzer, which can decouple the energy/wavelength and Bragg angle of the photon beam using the dispersion effect in the diffraction process. The method was used to measure the energy jitter and drift of the photon beam on BL09B and BL16U at the Shanghai Synchrotron Radiation Facility. The experimental results show that this method can provide a fast way to measure the beam stability of different light sources including bending magnet and undulator with meV-level energy resolution and ms-level time response.

In synchrotron X-ray radiography, achieving high image resolution and an optimal signal-to-noise ratio (SNR) is crucial for the subsequent accurate image analysis. Traditional methods often struggle to balance these two parameters, especially in situ applications where rapid data acquisition is essential to capture specific dynamic processes. For quantitative image data analysis, using monochromatic X-rays is essential. A double multilayer monochromator (DMM) is successfully used for this aim at the BAMline, BESSY II (Helmholtz Zentrum Berlin, Germany). However, such DMMs are prone to producing an unstable horizontal stripe pattern. Such an unstable pattern renders proper signal normalization difficult and thereby causes a reduction of the SNR. We introduce a novel approach to enhance SNR while preserving resolution: dynamic tilting of the DMM. By adjusting the orientation of the DMM during the acquisition of radiographic projections, we optimize the X-ray imaging quality, thereby enhancing the SNR. The corresponding shift of the projection during this movement is corrected in post-processing. The latter correction allows a good resolution to be preserved. This dynamic tilting technique enables the homogenization of the beam profile and thereby effectively reduces noise while maintaining high resolution. We demonstrate that data captured using this proposed technique can be seamlessly integrated into the existing radiographic data workflow, as it does not need hardware modifications to classical X-ray imaging beamline setups. This facilitates further image analysis and processing using established methods.

X-ray multi-projection imaging (XMPI) is an emerging experimental technique for the acquisition of rotation-free, time-resolved, volumetric information on stochastic processes. The technique is developed for high-brilliance light-source facilities, aiming to address known limitations of state-of-the-art imaging methods in the acquisition of 4D sample information, linked to their need for sample rotation. XMPI relies on a beam-splitting scheme, that illuminates a sample from multiple, angularly spaced viewpoints, and employs fast, indirect, X-ray imaging detectors for the collection of the data. This approach enables studies of previously inaccessible phenomena of industrial and societal relevance such as fractures in solids, propagation of shock waves, laser-based 3D printing, or even fast processes in the biological domain. In this work, we discuss in detail the beam-splitting scheme of XMPI. More specifically, we explore the relevant properties of X-ray splitter optics for their use in XMPI schemes, both at synchrotron insertion devices and XFEL facilities. Furthermore, we describe two distinct XMPI schemes, designed to faciliate large samples and complex sample environments. Finally, we present experimental proof of the feasibility of MHz-rate XMPI at the European XFEL. This detailed overview aims to state the challenges and the potential of XMPI and act as a stepping stone for future development of the technique.

Soft X-ray spectroscopy is an important technique for measuring the fundamental properties of materials. However, for measurements of samples in the sub-millimetre range, many experimental setups show limitations. Position drifts on the order of hundreds of micrometres during thermal stabilization of the system can last for hours of expensive beam time. To compensate for drifts, sample tracking and feedback systems must be used. However, in complex sample environments where sample access is very limited, many existing solutions cannot be applied. In this work, we apply a robust computer vision algorithm to automatically track and readjust the sample position in the dozens of micrometres range. Our approach is applied in a complex sample environment, where the sample is in an ultra-high vacuum chamber, surrounded by cooled thermal shields to reach sample temperatures down to 2.5 K and in the center of a superconducting split coil. Our implementation allows sample-position tracking and adjustment in the vertical direction since this is the dimension where drifts occur during sample temperature change in our setup. The approach can be easily extended to 2D. The algorithm enables a factor of ten improvement in the overlap of a series of X-ray absorption spectra in a sample with a vertical size down to 70 µm. This solution can be used in a variety of experimental stations, where optical access is available and sample access by other means is reduced.

The neutralization of acidic solutions containing U (IV) and Ce (III) at room temperature in glove box atmosphere and in the presence of dithionite results in coprecipitation of these elements as amorphous solid solutions CexU1–xO2±y. The solubilities of the precipitates with different mole fractions (x) of Ce(OH)3 (x = 0.01 or 0.1) were determined in 1 M NaClO4 solutions between pH 2.2 and 12.8 under reducing conditions. The solids were investigated by a variety of methods (chemical analysis, SEM-EDX, XRD, XPS, XAS) to determine the nature of the solid solutions formed, their composition and the valence state of Ce and U. X-ray photoelectron spectroscopy confirmed the oxidation states of the solids both before and after the equilibration as Ce (III) and U (IV). The amorphous coprecipitates reached equilibrium relatively fast (∼1 week). The release of Ce from the coprecipitates was totally dominated by the release of uranium over the whole pH range. The Ce concentrations decrease slightly with the decrease of Ce content in the solid, suggesting that CexU1–xO2±y solids behave thermodynamically as solid solutions. The concentrations of U in equilibrium with the coprecipitate were in excellent agreement with the solubility of UO2(s) under reducing conditions reported in the literature. The conditional solubility product of Ce(OH)3 from the coprecipitate was several orders of magnitude (∼4 in the near neutral pH range and ∼18 in the acidic range) lower than that of pure Ce(OH)3(s). The activities and activity coefficients of Ce(OH)3(s) in the coprecipitate were also estimated. Activity coefficients are much less than 1, indicating that the mixing of Ce(OH)3 with UO2 is highly favorable.

The design and first results of a high-transmission soft X-ray spectrometer operated at the X-SPEC double-undulator beamline of the KIT Light Source are presented. As a unique feature, particular emphasis was placed on optimizing the spectrometer transmission by maximizing the solid angle and the efficiencies of spectrometer gratings and detector. A CMOS detector, optimized for soft X-rays, allows for quantum efficiencies of 90% or above over the full energy range of the spectrometer, while simultaneously offering short readout times. Combining an optimized control system at the X-SPEC beamline with continuous energy scans (as opposed to step scans), the high transmission of the spectrometer, and the fast readout of the CMOS camera, enable the collection of entire rapid resonant inelastic soft X-ray scattering maps in less than 1 min. Series of spectra at a fixed energy can be taken with a frequency of up to 5 Hz. Furthermore, the use of higher-order reflections allows a very wide energy range (45 to 2000 eV) to be covered with only two blazed gratings, while keeping the efficiency high and the resolving power E/ΔE above 1500 and 3000 with low- and high-energy gratings, respectively.

The Takagi–Taupin equations are solved in their simplest form (zero deformation) to obtain the Bragg-diffracted and transmitted complex amplitudes. The case of plane-parallel crystal plates is discussed using a matrix model. The equations are implemented in an open-source Python library crystalpy adapted for numerical applications such as crystal reflectivity calculations and ray tracing.

Conic sections are commonly used in reflective X-ray optics. Hyperbolic mirrors can focus a converging light source and are frequently paired with elliptical or parabolic mirrors in Wolter type configurations. This paper derives the closed-form expression for a mirror-centered hyperbolic shape, with zero-slope at the origin. Combined with the slope and curvature, such an expression facilitates metrology, manufacturing and mirror-bending calculations. Previous works consider ellipses, parabolas, magnifying hyperbolas or employ lengthy approximations. Here, the exact shape function is given in terms of the mirror incidence angle and the source and image distances.

The Australian Synchrotron Imaging and Medical Beamline (IMBL) uses a superconducting multipole wiggler (SCMPW) source, dual crystal Laue monochromator and 135 m propagation distance to enable imaging and computed tomography (CT) studies of large samples with mono-energetic radiation. This study aimed to quantify two methods for CT dose reduction: wiggler source operation at reduced magnetic field strength, and beam modulation with spatial filters placed upstream from the sample. Transmission measurements with copper were used to indirectly quantify the influence of third harmonic radiation. Operation at lower wiggler magnetic field strength reduces dose rates by an order of magnitude, and suppresses the influence of harmonic radiation, which is of significance near 30 keV. Beam shaping filters modulate the incident beam profile for near constant transmitted signal, and offer protection to radio-sensitive surface organs: the eye lens, thyroid and female breast. Their effect is to reduce the peripheral dose and the dose to the scanned volume by about 10% for biological samples of 35–50 mm diameter and by 20–30% for samples of up to 160 mm diameter. CT dosimetry results are presented as in-air measurements that are specific to the IMBL, and as ratios to in-air measurements that may be applied to other beamlines. As CT dose calculators for small animals are yet to be developed, results presented here and in a previous study may be used to estimate absorbed dose to organs near the surface and the isocentre.

Abu Dhabi Islamic Bank (ADIB) has announced that...

PayPoint has announced its partnership with

Italy-based unicorn Satispay has announced...

XMDS Holding has launched XPP, a new umbrella organisation...

Tide, a UK-based business...

The inaugural edition of the Emerging Technologies and Trends in Identity Verification (IDV), KYC, and KYB Report 2024 offers a comprehensive overview of the key technology trends and best practices in digital onboarding for consumers and businesses in 2024.

The 6th edition of the Fraud Prevention in Ecommerce Report provides a thorough overview of the global fraud ecosystem.

Canada-based fintech firm Nuvei has partnered with

Payment orchestration platform FinMont has partnered with...

HSBC has launched a cross-border virtual account solution aimed at...

Token Payment Services (TOKEN) has announced that it obtained its...

Klarna has secured a deal to offload BNPL loans that it...

Mastercard has launched the Mastercard Move Commercial...

The Federal Trade Commission (FTC) has...

Zilch, a fintech company operating an ad-subsidised payments...

Germany-based fintech MODIFI has announced...

FOMO Pay, a payment institution based in Singapore, has...

Source: Darren Aftahi 11/06/2024

Roth MKM analyst Darren Aftahi, in a research report published on November 5, 2024, maintained a Buy rating on Terawulf Inc. (WULF:NASDAQ) with a price target of US$7.50. The report follows TeraWulf's October production update and insights into its HPC capacity expansion plans.

Aftahi highlighted the company's HPC capacity development, stating, "WULF gained better insight into its supply chain for delivering ~72.5MW of HPC capacity by 2Q25, with the potential to generate ~US$90M in annualized revenue with US$60M+ in profit (exit run rate). Its 2.5MW concept building is now complete, and its 20MW facility is on schedule for 1Q25."

Regarding October's production metrics, the analyst noted, "WULF mined 150 BTC in October, up 7% m/m on a comparable basis to only Lake Mariner in September (140 BTC). The ending hash rate is now 8.1 EH/s (vs. 10) from the removal of Nautilus." He added that "machine efficiency is now 22 J/TH vs. the prior combined rate of ~24.6 J/TH."

The analyst observed operational improvements, commenting, "Avg. operating hash rate was ~6.8 or ~84%, slightly ahead of prior months (although reported in aggregate). Part of this is being driven by the accelerated replacement of older miners at Lake Mariner."

The report noted that upon reinstallation of damaged miners at Lake Mariner, the hash rate would increase to approximately 8.7 EH/s, though power cost per BTC increased about 5% month over month.

Roth MKM's valuation methodology is based on an EBITDA multiple approach. Aftahi explained, "We apply a ~24x multiple to our projected FY25 adj. EBITDA of ~US$120M to arrive at our price target of US$7.50."

The analyst outlined several risk factors, including Bitcoin price volatility, regulatory changes, unproven new business segments, capital requirements, weather impacts, competition, power contracts, and reliance on third-party suppliers.

In conclusion, Roth MKM's maintenance of their Buy rating and US$7.50 price target reflects confidence in TeraWulf's operational execution and growth potential in both Bitcoin mining and HPC capacity. The share price at the time of the report of US$5.98 represents a potential return of approximately 25.4% to the analyst's target price.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

Disclosures for Roth MKM, TeraWulf Inc., November 5, 2024

Regulation Analyst Certification ("Reg AC"): The research analyst primarily responsible for the content of this report certifies the following under Reg AC: I hereby certify that all views expressed in this report accurately reflect my personal views about the subject company or companies and its or their securities. I also certify that no part of my compensation was, is or will be, directly or indirectly, related to the specific recommendations or views expressed in this report.

Disclosures: Within the last twelve months, ROTH Capital Partners, or an affiliate to ROTH Capital Partners, has received compensation for investment banking services from TeraWulf, Inc.. Shares of TeraWulf, Inc. may be subject to the Securities and Exchange Commission's Penny Stock Rules, which may set forth sales practice requirements for certain low-priced securities.

Not Covered [NC]: ROTH Capital does not publish research or have an opinion about this security. ROTH Capital Partners, LLC expects to receive or intends to seek compensation for investment banking or other business relationships with the covered companies mentioned in this report in the next three months. The material, information and facts discussed in this report other than the information regarding ROTH Capital Partners, LLC and its affiliates, are from sources believed to be reliable, but are in no way guaranteed to be complete or accurate. This report should not be used as a complete analysis of the company, industry or security discussed in the report. Additional information is available upon request. This is not, however, an offer or solicitation of the securities discussed. Any opinions or estimates in this report are subject to change without notice. An investment in the stock may involve risks and uncertainties that could cause actual results to differ materially from the forward-looking statements. Additionally, an investment in the stock may involve a high degree of risk and may not be suitable for all investors. No part of this report may be reproduced in any form without the express written permission of ROTH. Copyright 2024. Member: FINRA/SIPC.

( Companies Mentioned: WULF:NASDAQ, )

Source: Streetwise Reports 11/06/2024

Terawulf Inc. (WULF:NASDAQ) has reported its October 2024 production and operations. The report included significant advancements in self-mining with an operational capacity reaching 8.1 exahash per second (EH/s). This marks a 62% increase from the prior year. The company mined a total of 150 bitcoins during the month, averaging approximately 4.8 bitcoins per day, at a power cost of US$36,789 per bitcoin mined or about US$0.048 per kWh (kilowatt-hour). To improve efficiency, TeraWulf continued its miner refresh program at its Lake Mariner facility, replacing older models with upgraded S19 XP miners following its sale of interest in the Nautilus Cryptomine facility, which enabled additional hardware acquisitions.

Focusing on high-performance computing (HPC) infrastructure, TeraWulf's aim is to establish 72.5 MW HPC hosting capacity at Lake Mariner by Q2 2025. October's operational hash rate averaged 6.8 EH/s, with adjustments made for demand response events and performance optimization measures to enhance profitability. Construction on the company's 20 MW HPC hosting facility, CB-1, remains on schedule for Q1 2025, and a larger 50 MW HPC facility, CB-2, is expected by Q2 2025. The recent sale of TeraWulf's equity interest in Nautilus and new financing through convertible notes are anticipated to support these growth initiatives.

Sean Farrell, Senior Vice President of Operations at TeraWulf, explained in the press release, "October marked another productive month, with TeraWulf mining 150 bitcoin and sustaining an average daily production of around 5 bitcoin . . . In line with our previously outlined plans, we are accelerating the transition to more efficient mining hardware by replacing older miners at Lake Mariner with S19 XP models. We are also working closely with Bitmain's warranty department on a recovery plan to repair and replace 1.5 EH of mining equipment with a target completion by the end of the year. Furthermore, we have established a dedicated Business Development and Performance Optimization team focused on integrating advanced IT and software solutions to improve our operational hash rate and overall efficiency. Building 5, which has been designed to handle higher heat exhaust of the latest generation miners, remains on track to be operational in Q1 2025."

Why Crypto Mining?

The cryptocurrency mining sector has seen recent momentum, bolstered by the U.S. election results and the evolving landscape for Bitcoin. As Benzinga reported on November 6, bitcoin mining stocks experienced notable gains following the U.S. presidential election, which led to Bitcoin reaching record highs. The outcome was anticipated to benefit U.S.-focused mining companies as pro-crypto policies, including a preference for domestic bitcoin production, gained prominence. Benzinga noted that Trump had previously expressed support for more bitcoin mining within the U.S., a stance that influenced broader market optimism in the days following his election.

On November 4, Yahoo! Finance highlighted the growing trend among Bitcoin miners to integrate artificial intelligence (AI) to power a "new industrial revolution." As described by Rob Nelson, who emphasized the impact of cryptocurrency mining as a vehicle for both economic and technological change. This trend has driven miners to secure deals within the AI sector, given the synergies in computational power required for both cryptocurrency and AI initiatives. Nelson projected that this cross-industry expansion could have far-reaching effects, creating value for both miners and AI-focused enterprises.

Additionally, a November 6 report from Time explored the significance of the recent Presidential election outcome for the crypto industry's future regulatory environment. According to Time, Trump's support for the industry included ambitions to boost the country's bitcoin mining footprint, which aligned with crypto PACs' efforts to secure pro-crypto candidates. The article reported that these advocacy groups saw the election as an opportunity to reshape crypto regulation and encourage growth in U.S.-based bitcoin mining.

TeraWulf's Catalysts

TeraWulf's recent initiatives set a foundation for further growth and operational efficiency. According to the company's investor presentation, the sale of its 25% equity interest in the Nautilus facility enhances liquidity. This enables TeraWulf to reinvest in its flagship Lake Mariner site for both HPC and AI expansion.

The transaction also reduces exposure to the expiring Nautilus 2¢ power contract by 2027, positioning the company to benefit from projected power price increases at Lake Mariner. This strategic realignment is anticipated to improve fleet efficiency, with an upgraded mining fleet targeting 13 EH/s by Q1 2025, supported by the deployment of next-gen S21 Pro miners.

What Experts Are Saying...

On November 5, 2024, Roth MKM analyst Darren Aftahi assigned TeraWulf a "Buy" rating and set a price target of US$7.50. Roth highlighted optimism around the company's expansion and potential in high-performance computing (HPC) and bitcoin mining. Roth noted that TeraWulf's planned 72.5 MW of HPC capacity by Q2 2025 could generate annualized revenue of approximately US$90 million, with over US$60 million in profit. [OWNERSHIP_CHART-11184]

The report highlighted the completion of TeraWulf's initial 2.5 MW HPC project and its upcoming 20 MW facility, which remains on track for Q1 2025. Roth analysts pointed to the operational progress at TeraWulf's Lake Mariner facility, emphasizing the company's improvements in mining efficiency with new S19 XP models, which brought its machine efficiency to 22 J/TH.

Ownership and Share Structure

According to Refinitiv, management and insiders hold 6.67% of TeraWulf. Of them, Co-founder, COO, and CTO Nazar M. Khan holds the most, with 4.43%.

Strategic investors hold 21.37%. Of them, Riesling Power LLC holds the most at 5.23%, Baryshore Capital LLC holds 4.77%, Revolve Capital LLC has 4.67%, Opportunity Four of Parabolic Ventures owns 2.46%, and Lake Harriet Holdings LLC has 1.90%.

Institutions have 45.11%. The largest holders there are The Vanguard Group at 6.12%, BlackRock Instituional Trust with 4.22%, Two Sigma Investments LP at 2.28%, Beryl Capital Management LLC holds 1.74%, and Geode Capital Management LLC has 1.66%. The rest is retail.

TeraWulf has a market cap of US$2,375.93 million and 275.29 million free float shares. Their 52-week range is US$ 0.8911 - 7.28.
Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1) James Guttman wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.

2) This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

( Companies Mentioned: WULF:NASDAQ, )

Source: Scott Searle 11/08/2024

Gogo Inc. (GOGO:NASDAQ) reported its Q3/24 financial results, and they slightly exceeded expectations, reported Scott Searle, managing director at Roth MKM, in a Nov. 5 research note.

The company provides in-flight connectivity services to business aviation markets through its North American terrestrial air-to-ground network.

137% Potential Return

Roth maintained its target price of US$15.50 per share on Gogo, noted Searle.

"We believe this provides a reasonable 12-plus-month target given the expected impact from two major new product cycles as we enter 2025," he wrote, referring to Galileo, the company's global inflight broadband service, and its 5G product line.

In comparison, the company's share price at the time of the report was about US$6.55 per share. From this price, the return to target reflects 137% upside.

Gogo remains a Buy.

Quarter's Highlights

Searle reported that Gogo's Q3/24 service revenue was a beat. At US$81.9 million (US$81.9M), it was slightly higher than that in Q2/24 and driven by modestly better-than-expected aircraft online, Searle reported. This revenue exceeded Roth's estimate by about US$300,000.

Also of note, Galileo is on track to launch in Q4/24, and Gogo continues to grow its portfolio of supplemental type certificates and partners around the world.

A Look Ahead

Gogo's outlook for 2024 of US$400-410M encompasses consensus' estimate, noted Searle. The company, though, has "pulled long-term guidance ahead of the Satcom Direct [acquisition] closing."

Roth expects Galileo and 5G will lead recovery, expected in late 2025.

In other news, noted Searle, Gogo Chairman and Chief Executive Officer Oakleigh Thorne will present at Roth's NYC Tech Event on Nov. 20.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. Doresa Banning wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an independent contractor.
2. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

Disclosures for Roth MKM, Gogo Inc., November 5, 2024

Regulation Analyst Certification ("Reg AC"): The research analyst primarily responsible for the content of this report certifies the following under Reg AC: I hereby certify that all views expressed in this report accurately reflect my personal views about the subject company or companies and its or their securities. I also certify that no part of my compensation was, is or will be, directly or indirectly, related to the specific recommendations or views expressed in this report.

Disclosures: ROTH makes a market in shares of Gogo, Inc. and as such, buys and sells from customers on a principal basis.

ROTH Capital Partners, LLC expects to receive or intends to seek compensation for investment banking or other business relationships with the covered companies mentioned in this report in the next three months. The material, information and facts discussed in this report other than the information regarding ROTH Capital Partners, LLC and its affiliates, are from sources believed to be reliable, but are in no way guaranteed to be complete or accurate. This report should not be used as a complete analysis of the company, industry or security discussed in the report. Additional information is available upon request. This is not, however, an offer or solicitation of the securities discussed. Any opinions or estimates in this report are subject to change without notice. An investment in the stock may involve risks and uncertainties that could cause actual results to differ materially from the forward-looking statements. Additionally, an investment in the stock may involve a high degree of risk and may not be suitable for all investors. No part of this report may be reproduced in any form without the express written permission of ROTH. Copyright 2024. Member: FINRA/SIPC.

( Companies Mentioned: GOGO:NASDAQ, )

Source: Rob Goff 11/11/2024

Volatus Aerospace Inc. (TSXV:FLT; OTCQX:TAKOF:ABBA.F) secured CA$2.8 million (CA$2.8M) through a private placement after having recently completed a financing package for CA$15M, reported Ventum Capital Markets analyst Rob Goff in a Nov. 6 research note. Volatus provides aerial intelligence solutions using drones and other aircraft systems, including inspections, surveillance, design, and sales.

"We believe the two financing rounds should be positively rewarded by investors for the financial flexibility they bring to Volatus, while the commitment of the two debt partners represents a strong validation," Goff wrote.

192% Return Implied

Goff reiterated Ventum's target price on the Canadian aircraft solutions provider of CA$0.38 per share. In comparison, it was trading at the time of the report at CA$0.13 per share. From this price, the return to target is 192%.

Volatus is a Buy.

Plans for Using the Funds

Goff discussed the private placement and Volatus' intended uses of it. For the offering, a total of 19,766,000 units was sold at CA$0.14 apiece. Each unit consists of one common Volatus voting share and one common Volatus voting share purchase warrant. With each warrant, the holder may purchase one Volatus common share for CA$0.20 per warrant share during the 24 months after the close of the raise.

"We believe the equity and debt financing will allow Volatus to invest in working capital to support higher equipment sales," an advantage its smaller peers do not have, Goff wrote.

The company expects to fund about CA$9–12M in unmet equipment sales demand, so Goff forecasts it will designate CA$3–4M to this purpose, to purchase working capital. Other uses of the proceeds are for research and development, capital expenditures and inventory.

Goff reported that Volatus wants to leverage every incremental CA$1M of invested working capital into about CA$3–4M of incremental equipment sales annually, aiming for gross profit margins of about 25% and modest incremental operating costs.

Volatus plans to use proceeds from the debt raise to back pay the outstanding CA$6M senior loan it has with a major Canadian bank. The company also intends to open a new secured line of credit to support anticipated growth. Current debt related to its fleet financing is about CA$5M.

Opportunities for Growth

With more balance sheet flexibility, Goff wrote, Volatus may pursue longer-term contracts with utilities and pipelines for inspection services using unmanned and manned fleets. This would position the company to become a leader in this specific market.

Volatus can monetize its portfolio of drones and landing stations. The U.S.' initiatives and intention to reduce use of Chinese-manufactured products could help drive this expansion. The company has third-party manufacturing capabilities to significantly boost its equipment sales.

"We anticipate that Volatus will leverage its unique software, network, and equipment capabilities, stewarded by an experienced and commercially focused leadership team," Goff wrote.

Future Financial Expectations

Goff discussed forecasts for merger synergies, EBITDA, and revenue. As for initial efficiencies achieved from Volatus' merger with Drone Delivery Canada, they should be seen in Volatus' Q4/24 and Q1/25 financial results, Goff wrote. Already, the company has exceeded CA$2.6M in cost synergies and expects to surpass CA$3M in the near term. By 2026, the company estimates revenue synergies will be about CA$5M-plus and will include initial traction gained from business-to-business cargo delivery.

Looking to 2025, Ventum expects Volatus to turn EBITDA break even in Q2/25 and produce CA$5.7M in positive EBITDA in 2025 versus Volatus' estimate of CA$10M-plus, Goff reported. Ventum estimates that Volatus will generate CA$60.3M in revenue in full-year 2025, less than Volatus' guidance of CA$70M+.

"We anticipate that Volatus will leverage its unique software, network, and equipment capabilities, stewarded by an experienced and commercially focused leadership team," wrote Goff.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. Doresa Banning wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an independent contractor.
2. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

Disclosures for Ventum Capital Markets, Volatus Aerospace Inc., November 6, 2024

Analyst Certification I, Rob Goff, hereby certify that all of the views expressed in this report accurately reflect my personal views about the subject securities or issuers. I also certify that no part of my compensation was, is, or will be, directly or indirectly related to the specific recommendations or views expressed in this report. I am the research analyst primarily responsible for preparing this report.

Research Disclosures

1. Ventum Financial Corp. and its affiliates’ holdings in the subject company’s securities, in aggregate exceeds 1% of each company’s issued and outstanding securities.
2. Ventum Financial Corp. and/or its affiliates have received compensation for investment banking services for the subject company over the preceding 12- month period.
3. Ventum Financial Corp. and/or its affiliates expect to receive or intend to seek compensation for investment banking services from the subject company.
4. Ventum Financial Corp. and/or its affiliates have managed or co-managed a public offering of securities for the subject company in the past 12 months.

General Disclosure The affiliates of Ventum Financial Corp. are Ventum Financial (US) Corp., Ventum Financial Services Corp., and Ventum Capital Corp. Analysts are compensated through a combined base salary and bonus payout system. The bonus payout is amongst other factors determined by revenue generated directly or indirectly from various departments including Investment Banking. Evaluation is largely on an activity-based system that includes some of the following criteria: reports generated, timeliness, performance of recommendations, knowledge of industry, quality of research and investment guidance, and client feedback. Analysts and all other Research staff are not directly compensated for specific Investment Banking transactions. None of the material, nor its content, nor any copy of it, may be altered in any way, transmitted to, copied or distributed to any other party, without the prior express written permission of Ventum Financial Corp. Ventum Financial Corp.’s policies and procedures regarding dissemination of research, stock rating and target price changes can be reviewed on our corporate website at www.ventumfinancial.com (Research: Research and Conflict Disclosure).

Participants of all Canadian Marketplaces. Members: Canadian Investment Regulatory Organization, Canadian Investor Protection Fund and AdvantageBC International Business Centre - Vancouver. Estimates and projections contained herein are our own and are based on assumptions which we believe to be reasonable. Information presented herein, while obtained from sources we believe to be reliable, is not guaranteed either as to accuracy or completeness, nor in providing it does Ventum Financial Corp. assume any responsibility or liability. This information is given as of the date appearing on this report, and Ventum Financial Corp. assumes no obligation to update the information or advise on further developments relating to securities. Ventum Financial Corp. and its aೀiliates, as well as their respective partners, directors, shareholders, and employees may have a position in the securities mentioned herein and may make purchases and/or sales from time to time. Ventum Financial Corp. may act, or may have acted in the past, as a ೃnancial advisor, ೃscal agent or underwriter for certain of the companies mentioned herein and may receive, or may have received, a remuneration for their services from those companies. This report is not to be construed as an oೀer to sell, or the solicitation of an oೀer to buy, securities and is intended for distribution only in those jurisdictions where Ventum Financial Corp. is registered as an advisor or a dealer in securities. Any distribution or dissemination of this report in any other jurisdiction is strictly prohibited. Ventum Financial Corp. is a Canadian broker-dealer and is not subject to the standards or requirements of MiFID II. Readers of Ventum Financial Corp. research in the applicable jurisdictions should make their own eೀorts to ensure MiFID II compliance. For further disclosure information, reader is referred to the disclosure section of our website

( Companies Mentioned: TSXV:FLT;OTCQX:TAKOF:ABBA.F), )

Keyshia Cole performs during the 4th annual BET Honors at the Warner Theatre on Jan. 15, 2011 in Washington, DC.; Credit: Kris Connor/Getty Images

Police say Grammy-nominated R&B singer Keyshia Cole has been arrested on suspicion of battery after an altercation early Friday morning in Los Angeles.

Los Angeles police officer Nuria Vanegas says Cole was arrested around 5 a.m. after someone initiated a private person's arrest. The 32-year-old was booked on suspicion of battery and released from custody Friday afternoon.

Police did not release any further details about the incident.

An email message sent to Cole's publicist was not immediately returned.

Cole's second album, 2007's "Just Like You," produced the songs "Let It Go," ''I Remember" and "Heaven Sent."

We explore a special class of periodic graphs, ladder graphs, whose edges can coincide when embedded vertices are moved. Many of these exhibit additional non-crystallographic graph symmetries.

The general equation of the δ direct methods is established and applied in its difference form to the definition of one of the two residuals that constitute the SMAR phasing algorithm. These two residuals use the absolute value of ρ and/or the zero conversion of negative Fourier ripples (≥50% of the unit-cell volume). Alternatively, when solved for ρ, the general equation provides a simple derivation of the already known δM tangent formula.

We enumerate the 55083357 iso-edge subdivisions of six-dimensional translational lattices. We report on the use of the method of canonical forms that allows us to apply hashing techniques used in modern databases.

Source: Streetwise Reports 10/22/2024

Canter Resources Corp. (CRC:CSE; CNRCF:OTC; 601:FRA) has completed its acquisition of the Railroad Valley lithium-boron claims (RV project). The RV project claim block shares a common border with land controlled by 3 Proton Lithium (3PL), a private critical mineral explorer in Railroad Valley. Canter intends to complete follow-up sampling at the project in the fourth quarter of 2024, 164 kilometers from their exploration base in Tonopah, Nevada.

In the company news release, Joness Lang, CEO of Canter Resources, commented on the acquisition, stating, "We are excited to have expanded our lithium-boron exploration footprint in Nevada with this strategic acquisition in a highly prospective, yet underexplored area. While our primary focus remains on advancing our flagship Columbus project, we see value in adding low-cost, high-potential projects that strengthen our portfolio and align with our long-term growth strategy."

Lithium-Boron Market Trends and Opportunities

Visual Capitalist reported on September 29 that cobalt, a critical mineral used in battery production, had "gained significant attention in recent years due to its wide range of commercial, industrial, and military applications." The growing demand for cobalt in the electric vehicle (EV) sector was highlighted, with "the EV sector accounting for 40% of the global cobalt market," reinforcing its importance in the global transition to electrification. Additionally, 87% of China's cobalt consumption was "dedicated to the lithium-ion battery industry."

On October 1, Ahead of the Herd emphasized a favorable environment for risk assets, noting, "The combination of interest-rate cuts from the Federal Reserve, resilient economic growth, and the un-inversion of the yield curve" as contributing factors. The S&P/TSX Global Mining Index gained 14% since September 6, marking its biggest jump of the year, with central banks cutting interest rates and the U.S. signaling more battery metal funding. Ahead of the Herd also stated that "majors, mid-tiers, and juniors all looked ripe for a rebound" in this risk-tolerant environment.

On October 8, Forbes reported that "a 50% rise in the price of a downtrodden lithium producer has boosted investor hopes that a revival in the battery metal is possible" after two difficult years of oversupply and low prices. Lithium was "once the hottest metal in the commodity sector" and had begun showing "signs of recovery as investor interest picks up again." Despite the downturn, the long-term outlook for lithium remained strong, with Forbes emphasizing its essential role "for the future of electric vehicles and battery technology."

According to Barry Dawes of Martin Place Securities that same day, "the lithium market is showing strong signs of upturn," with the possibility of "lithium shortages post-2027," highlighting the sector's future growth potential.

Canter's Catalysts Driving Growth

As outlined in their investor presentation, Canter Resources' Railroad Valley acquisition aligns with the company's strategy of expanding its critical minerals portfolio at a low cost while leveraging geological similarities to proven lithium-producing regions. The Railroad Valley project holds promise due to its favorable geological features, such as volcanic calderas and closed-basin characteristics, which are known to enhance lithium and boron concentration.

According to the company's investor presentation, this acquisition bolsters Canter's portfolio as it continues to focus on the Columbus project. The upcoming follow-up sampling and the planned Q4 2024 exploration at the Railroad Valley site further demonstrate the company's commitment to expanding its exploration activities. Canter's continued exploration efforts are expected to provide the data necessary to identify lithium-boron deposits across its portfolio, enhancing long-term growth potential.

Analysts On Canter

*According to Technical Analyst Clive Maund, who issued an opinion on October 16, Canter Resources Corp. was viewed as an "Immediate Strong Buy." Maund pointed out that the company's stock was priced at "some 8% of its price at its late 2023 peak," making it a highly favorable entry point. He emphasized that despite the severe bear market in lithium, Canter had made "considerable progress" on its projects, which positioned the company to benefit as lithium prices stabilized. Maund highlighted that Canter's Columbus Basin Project, located in a region with favorable geology, "looks set to provide a 'kicker' for the stock," especially following positive Phase II drilling results.

On October 15, Jeff Clark from The Gold Advisor also shared a positive assessment of Canter Resources. Clark noted that the company had reported "significant findings from its Phase II Geoprobe drilling program" at the Columbus Project, including the highest boron concentration to date and consistent lithium values. He highlighted Canter's potential to make a major discovery at Columbus, particularly due to the structural similarities between this project and other successful lithium-boron operations in the region. Clark added that Canter's "low-cost shallow drilling" had laid the foundation for a deeper and more extensive exploration phase. He affirmed that Canter's market cap of CA$3.85M represented an "incredible bargain" considering the company's potential.

In What is Chen Buying? What is Chen Selling?, published on October 16, analyst Chen Lin provided a positive outlook on Canter Resources' drilling results. He highlighted that Phase II drilling at the Columbus Lithium-Boron Project returned "the highest dissolved boron concentration to date," which further underscored the project's potential. Lin emphasized the promising geochemical similarities between Canter's Columbus Basin and other major lithium-boron-producing regions, stating that these results "bolster the company’s hypothesis" and position Canter as a key player in the critical minerals market. [OWNERSHIP_CHART-10988]

Ownership and Share Structure

According to the company, managers and insiders own about 9.6% of Canter Resources, and strategic investors (including the founding group and Michael Gentile & Advisors) own about 12%.

The investors with the largest stake are all insiders. They are CEO and Director Joness Lang with 3.38%, Director and Strategic Adviser Warwick Smith with 2.14%, Director and Technical Adviser Kenneth Cunningham with 1.95%, Chief Financial Officer Alnesh Mohan with 0.97%, and Director and Technical Adviser Eric Saderholm with 0.58%, and Gentile, who owns about 4% personally.

Four institutions or funds, including Euro Pacific Asset Management, collectively hold 3%. Retail investors own the remaining.

The Canadian explorer has 51.29 million outstanding shares, 46.41 million free float traded shares with a CA$4.11 million market cap.

Over the past 52 weeks, Canter has traded between CA$0.07 and CA$0.99 per share.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. As of the date of this article, officers and/or employees of Streetwise Reports LLC (including members of their household) own securities of Canter Resources Corp.
2. James Guttman wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.
3. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

* Disclosure for the quote from the Clive Maund article published on October 16, 2024

1. For the quoted article (published on October 16, 2024), the Company has paid Street Smart, an affiliate of Streetwise Reports, US$2,500.
2. Author Certification and Compensation: [Clive Maund of clivemaund.com] is being compensated as an independent contractor by Street Smart, an affiliate of Streetwise Reports, for writing the article quoted. Maund received his UK Technical Analysts’ Diploma in 1989. The recommendations and opinions expressed in the article accurately reflect the personal, independent, and objective views of the author regarding any and all of the designated securities discussed. No part of the compensation received by the author was, is, or will be directly or indirectly related to the specific recommendations or views expressed

Clivemaund.com Disclosures

The quoted article represents the opinion and analysis of Mr. Maund, based on data available to him, at the time of writing. Mr. Maund's opinions are his own, and are not a recommendation or an offer to buy or sell securities. As trading and investing in any financial markets may involve serious risk of loss, Mr. Maund recommends that you consult with a qualified investment advisor, one licensed by appropriate regulatory agencies in your legal jurisdiction and do your own due diligence and research when making any kind of a transaction with financial ramifications. Although a qualified and experienced stock market analyst, Clive Maund is not a Registered Securities Advisor. Therefore Mr. Maund's opinions on the market and stocks cannot be only be construed as a recommendation or solicitation to buy and sell securities.

( Companies Mentioned: CRC:CSE; CNRCF:OTC; 601:FRA, )

Source: Streetwise Reports 10/28/2024

Atlas Lithium Corp. (ATLX:NASDAQ) announced that it has received the operational permit for its Neves Project. This marks a significant milestone for the company's ambitions in lithium production. The permit, approved by the Minas Gerais government in Brazil, allows Atlas Lithium to assemble and operate its processing plant, develop open-pit mining operations, and produce lithium concentrate. The unanimously voted October 25 decision officially progressed with the publication in Minas Gerais' government gazette the following day.

The Neves Project permit, a comprehensive triphasic license (LI/LP/LO), enables a more streamlined development, encompassing initial, installation, and operating permissions.

"Permitting is widely considered the most critical risk in any mining project," said Atlas Lithium CEO Marc Fogassa in the news release. The company's success in obtaining this permit underscores its commitment to sustainable, responsible operations in Brazil's "Lithium Valley."

The Allure of The Lithium Market

According to Visual Capitalist on September 29, battery metal prices have recently "struggled as a surge in new production overwhelmed demand." However, with battery demand projected to increase ninefold by 2040, companies positioned to produce high-quality lithium concentrate, such as Atlas Lithium, are likely to see enhanced market relevance as the demand trajectory for lithium-ion batteries strengthens significantly over the coming decades.

Jake Sekelsky from Alliance Global Partners reaffirmed his "Buy" rating for Atlas Lithium, setting a price target of US$45.00.

As Forbes wrote on October 8, 2024, recent industry dynamics have shown that "a 50% rise in the price of a downtrodden lithium producer has boosted investor hopes that a revival in the battery metal is possible after two grim years of oversupply and low prices."

This improvement in lithium prices reflects a broader trend that may positively impact companies like Atlas Lithium, whose operational progress aligns with the gradual sector recovery. The recent permitting for Atlas Lithium's Neves Project positions it to capitalize on these trends as it advances its lithium production capabilities.

On that same day, Barry Dawes of Martin Place Securities commented that "the lithium market is showing strong signs of upturn," anticipating "lithium shortages post-2027." This outlook emphasizes the sector's potential for heightened demand and supply constraints, which is particularly beneficial for projects advancing toward production. Atlas Lithium's strategy, which includes a modular processing plant and environmentally responsible operations, underscores the company's readiness to meet this anticipated demand.

What's Driving Atlas Forward?

Atlas Lithium's Neves Project's recent permit positions the company to advance toward its production goals with key environmental and operational clearances in place. According to the company's September 2024 investor presentation, this approval aligns with an expedited project timeline and enhances the company's potential to become a low-cost lithium concentrate producer. With Brazil's favorable mining conditions and Atlas Lithium's established partnerships with Tier 1 global companies, the Neves Project is poised for cost-effective operations and market alignment.

Atlas's modular processing plant, currently in the final pre-shipment stage, also demonstrates a strategic focus on efficiency and ESG standards. This advanced plant is set for rapid assembly and installation. It reflects Atlas Lithium's intention to minimize environmental impact and expedite production ramp-up, contributing to a streamlined path toward production in Brazil's burgeoning lithium sector.

Analysts On Atlas

Jake Sekelsky from Alliance Global Partners reaffirmed his "Buy" rating for Atlas Lithium, setting a price target of US$45.00. He described the recent operational permit issuance for the Neves Project as a "significant de-risking event," emphasizing that this milestone positions the project to move forward with construction and operations. Sekelsky highlighted that the approval "marks the final step in the permitting process" and grants Atlas Lithium the authorization to proceed with assembling its processing facility and initiating open-pit mining operations. This development aligns with a clear production path, with Sekelsky noting that the project is now at "shovel-ready status," a critical advancement toward fulfilling Atlas Lithium's strategic objectives. [OWNERSHIP_CHART-11040]

Sekelsky also pointed to the current market environment for lithium, expressing optimism regarding "signs of an upcoming recovery" in lithium prices. He interpreted recent merger and acquisition activities within the sector, including other acquisitions in Brazil's Lithium Valley, as indicators that larger players anticipate a rebound. Sekelsky remarked that this resurgence could benefit advanced hard-rock lithium projects, such as Neves, which "continue to command attention from potential suitors."

Ownership and Share Structure

About 34% of Atlas Lithium is owned by management and insiders. About 11% of the shareholders are institutional. Strategic partners hold another 12%. The rest, about 43%, is retail.

Top shareholders include Waratah Capital Advisors Ltd. with 4.34%, Mitsui & Co. Ltd. with 12.27%, and Candace Shira Associates LLC with 1.39%, according to Reuters.

Its market cap is about US$165 million. It trades in a 52-week range of US$34 and US$6.25.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1) James Guttman wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.

2) This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

( Companies Mentioned: ATLX:NASDAQ, )

Source: Streetwise Reports 10/31/2024

American Salars Lithium Inc. (USLI:CSE; USLIF:OTC; Z3P:FWB; A3E2NY:WKN) announced it has signed a mineral claims purchase agreement with an arm's length vendor to acquire 100% of the Lac Simard South Project in Quebec.

The more than 3,600-hectare project covers 64 claim blocks contiguous to projects owned by Sayona Mining Ltd. and Refined Metals Corp.'s Lac Simard property that sampled 2.1% lithium (4.52% lithium oxide or Li2O) and 5.88% tantalum oxide (Ta2O5), the company said.

"This is the company's entry point into Quebec with the intention of building a strategic portfolio of hard rock lithium projects to complement our lithium brine assets," Director and Chief Executive Officer R. Nick Horsley said. "The company's long-term belief in a lithium price rebound is steadfast and now is the time to build a multi-jurisdictional lithium company."

The Lac Simard South project is about 80 kilometers southwest of Sayona’s Authier lithium project and spans the townships of Beauneville, Clérion, Delbreuil, and ChabertIt, and is accessible by gravel road off Route 117 near the municipality of Cadillac, American Salars said.

"The claims in the eastern sector are accessible by a network of logging roads; the southern and western sectors are accessible by boat or all-terrain vehicle and has very little overburden," the company said in a release.

American Salars said it will begin planning for a work program to identify targets and test areas at the project, which is in an "active lithium exploration, production, and processing region of mining-friendly Quebec."

Located nearby is Sayona's Abitibi Hub — made up of its North American, Authier, and Tansim lithium projects — which boasts a "staggering aggregate measured and indicated resource of 111 million tonnes grading 1.14% lithium, the largest lithium resource in Quebec," American Salars said.

The company also noted the lithium hub's accessibility provides relatively lower exploration costs than James Bay, and the area has a fully operating lithium concentrator and a planned lithium carbonate/hydroxide conversion plant.

Additional Projects Being Reviewed, Co. Says

Under the agreement, American Salars is acquiring a 100% interest in the Lac Simard South project by issuing 50,000 common shares to the vendor, Quartier Mineral Ltd of Quebec.

The company said additional lithium projects are still being reviewed and will be subject to further disclosure once due diligence is completed and any deals are completed.

"Our primary objective remains the acquisition of low-cost lithium brine assets in Argentina while expanding our existing NI 43-101 lithium brine resources," Horsley has said. "We believe that Quebec-based hard rock lithium assets can now be acquired at deeply discounted prices and advanced with critical mineral flow through financing incentives in anticipation of the next lithium rally."

Technical Analyst Clive Maund wrote that the entire "San Emidio Desert basin is a highly prospective lithium exploration zone."

The company's existing portfolio of lithium deposits includes two NI 43-101-compliant Inferred Mineral Resource Estimates (MREs) consisting of 457,000 tonnes of lithium carbonate equivalent (LCE) at the Candela 2 Lithium Brine Project and a shared MRE at the Pocitos 1 Lithium Brine Project consisting of 760,000 tonnes LCE. The Pocitos MRE is shared with the neighboring Pocitos 2 property, which is not under contract or owned by American Salars, but the company noted that none of the drilling that makes up a partial basis for the MRE took place on the Pocitos 2 block. Both brine projects are located in Salta Province, Argentina.

Major mining company Rio Tino recently invested in Argentina by acquiring Argentina lithium producer Arcadium Lithium for US$6.7 billion, making the company the world's third-largest lithium producer.

American Salars also recently released assay results from soil samples collected during its Phase 1 exploration program at its 100%-owned Black Rock South lithium project close to Tesla's Gigafactory in Nevada. Out of 38 samples, 33 recorded lithium concentration of more than 100 parts per million (ppm) or higher, the company said. The highest grade was 180.5 ppm with an average grade of 131 ppm across the 33 samples of the surface of the property.

'Basing Process' Underway for Commodity

Technical Analyst Clive Maund wrote that the entire "San Emidio Desert basin is a highly prospective lithium exploration zone."*

"After a massive speculative runup in 2020 and especially in 2021, the lithium price fell victim to a severe bear market that ran from mid-2022 through the end of 2023," Maund wrote. "By the end of last year, this bear market had exhausted itself, and a basing process began that has continued up to the present."

Black Rock South is also 215 miles northwest of the United States' only producing lithium mine, the Silver Peak lithium brine mine owned by Albermarle.

The Catalyst: Experts Predict Recovery

Lithium is critical in the energy transition for its use in batteries for electric vehicles (EVs) and other application and is also used in electronics, medicine, and other industries.

While prices have slumped this year after EV sales didn't hit predicted marks, many experts believe the market will recover.

According to a report by Grand View Research, market size for the metal was estimated at US$31.75 billion last year and is projected to grow at a compound annual growth rate (CAGR) of 17.7% from this year through 2030.

"The automotive application segment is expected to witness substantial growth, driven by stringent regulations imposed by government bodies on ICE automakers to reduce carbon dioxide emissions from vehicles," researchers at Grand View said. "This has shifted the interest of automakers toward producing EVs, which is anticipated to benefit the demand for lithium and related products."

EVs and battery storage primarily will fuel future growth of the lithium market, Marin Katusa of Katusa Research wrote recently. He pointed out that all major electric vehicle batteries require lithium, about 1.55 pounds per kilowatt hour of battery capacity, on average.[OWNERSHIP_CHART-11095]

"I think the data speaks for itself that there's more growth and opportunity on the horizon," Katusa wrote.

The consensus among market analysts points to a recovery in lithium prices in the fourth quarter of 2024, Fastmarkets reported.

Ownership and Share Structure

American Salars said it has 28.8 million shares outstanding and 5.5 million warrants, according to the company.

As for insiders, the CEO Horsley owns about 1.83 million, or about 7.37%, with 4666,666 warrants. Strategic investor Hillcrest Merchant Partners owns 1 million shares or 4.03%. There are no institutional investors, and the rest is retail.

Its market cap is CA$4.79 million. It trades in a 52-week range of CA$0.45 and CA$0.08.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. American Salars Lithium Inc.has a consulting relationship with Street Smart an affiliate of Streetwise Reports. Street Smart Clients pay a monthly consulting fee between US$8,000 and US$20,000.
2. As of the date of this article, officers and/or employees of Streetwise Reports LLC (including members of their household) own securities of American Salars Lithium Inc.
3. Steve Sobek wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.
4. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

* Disclosure for the quote from the Clive Maund source June 17, 2024

1. For the quote (sourced on June 17, 2024), the Company has paid Street Smart, an affiliate of Streetwise Reports, US$1,500.
2. Author Certification and Compensation: [Clive Maund of clivemaund.com] is being compensated as an independent contractor by Street Smart, an affiliate of Streetwise Reports, for writing the article quoted. Maund received his UK Technical Analysts’ Diploma in 1989. The recommendations and opinions expressed in the article accurately reflect the personal, independent, and objective views of the author regarding any and all of the designated securities discussed. No part of the compensation received by the author was, is, or will be directly or indirectly related to the specific recommendations or views expressed.

Clivemaund.com Disclosures

The quoted article represents the opinion and analysis of Mr. Maund, based on data available to him, at the time of writing. Mr. Maund's opinions are his own, and are not a recommendation or an offer to buy or sell securities. As trading and investing in any financial markets may involve serious risk of loss, Mr. Maund recommends that you consult with a qualified investment advisor, one licensed by appropriate regulatory agencies in your legal jurisdiction and do your own due diligence and research when making any kind of a transaction with financial ramifications. Although a qualified and experienced stock market analyst, Clive Maund is not a Registered Securities Advisor. Therefore Mr. Maund's opinions on the market and stocks cannot be only be construed as a recommendation or solicitation to buy and sell securities.

( Companies Mentioned: USLI:CSE; USLIF:OTC; Z3P:FWB; A3E2NY:WKN, )