The two most abundant CaCO3 polymorphs, calcite and aragonite, are universally recognized for the richness of their morphology to which different twins make relevant contributions. The epitaxial transformation calcite ↔ aragonite has long been debated. While the twinning has been thoroughly treated, the homo-epitaxy occurring within each of these minerals has, inexplicably, been overlooked to date, both experimentally and theoretically. Twinning can be deceptive to the point where it can be mistaken for homo-epitaxy, thus making the proposed growth mechanism in the crystal aggregate wrong. Within the present work, the first aim is a theoretical investigation of the homo-epitaxies among the three {10.4}-cleavage, {01.2}-steep and {01.8}-flat rhombohedra of calcite. Accordingly, the specific adhesion energies were calculated between facing crystal forms, unequivocally showing that the {01.2}/{01.8} homo-epitaxy competes with the generation of both {01.2} and {01.8} contact twins. Secondly, the calculation of the specific adhesion energy was extended to consider homo-epitaxy for the {10.4} rhombohedron. The two-dimensional geometric lattice coincidence has been tried for the {00.1} pinacoidal form as well.

Here, a morphologically based approach is used for the in situ characterization of 3D growth rates of facetted crystals from the solution phase. Crystal images of single crystals of the β-form of l-glutamic acid are captured in situ during their growth at a relative supersaturation of 1.05 using transmission optical microscopy. The crystal growth rates estimated for both the {101} capping and {021} prismatic faces through image processing are consistent with those determined using reflection light mode [Jiang, Ma, Hazlehurst, Ilett, Jackson, Hogg & Roberts (2024). Cryst. Growth Des. 24, 3277–3288]. The growth rate in the {010} face is, for the first time, estimated from the shadow widths of the {021} prismatic faces and found to be typically about half that of the {021} prismatic faces. Analysis of the 3D shape during growth reveals that the initial needle-like crystal morphology develops during the growth process to become more tabular, associated with the Zingg factor evolving from 2.9 to 1.7 (>1). The change in relative solution supersaturation during the growth process is estimated from calculations of the crystal volume, offering an alternative approach to determine this dynamically from visual observations.

Slow-cooled CF8M duplex stainless steel is used for critical parts of the primary coolant pipes of nuclear reactors. This steel can endure severe service conditions, but it tends to become more brittle upon very long-term aging (tens of years). Therefore, it is essential to understand its specific microstructure and temporal evolution. As revealed by electron backscatter diffraction (EBSD) analyses, the microstructure consists of millimetre-scale ferritic grains within which austenite lath packets have grown with preferred crystallographic orientations concerning the parent ferritic phase far from the ferrite grain boundaries. In these lath packets where the austenite phase is nucleated, the lath morphology and crystal orientation accommodate the two ferrite orientations. Globally, the Pitsch orientation relationship appears to display the best agreement with the experimental data compared with other classical relationships. The austenite lath packets are parallel plate-shaped laths, characterized by their normal n. A novel methodology is introduced to elucidate the expected relationship between n and the crystallographic orientation given the coarse interfaces, even though n is only partly known from the observation surface, in contrast to the 3D crystal orientations measured by EBSD. The distribution of retrieved normals n is shown to be concentrated over a set of discrete orientations. Assuming that the ferrite and austenite obey the Pitsch orientation relationship, the determined lath normals are close to an invariant direction of the parent phase given by the same orientation relationship.

Presented here is an effective approach to desmearing slit ultra-small-angle neutron scattering (USANS) data, based on complementary small-angle neutron scattering (SANS) measurements, leading to a seamless merging of these data sets. The study focuses on the methodological aspects of desmearing USANS data, which can then be presented in the conventional manner of SANS, enabling a broader pool of data analysis methods. The key innovation lies in the use of smeared SANS data for extrapolating slit USANS, offering a self-consistent integrand function for desmearing with Lake's iterative method. The proposed approach is validated through experimental data on porous anodized aluminium oxide membranes, showcasing its applicability and benefits. The findings emphasize the importance of accurate desmearing for merging USANS and SANS data in the crossover q region, which is particularly crucial for complex scattering patterns.

We describe an ultra-compact setup for in situ X-ray diffraction on the inelastic X-ray scattering beamline ID20 at the European Synchrotron Radiation Facility. The main motivation for the design and construction of this setup is the increasing demand for on-the-fly sample characterization, as well as ease of navigation through a sample's phase diagram, for example subjected to high-pressure and/or high-temperature conditions. We provide technical details and demonstrate the performance of the setup.

Here, a recently commissioned five-analyzer Johann spectrometer at the Inner Shell Spectroscopy beamline (8-ID) at the National Synchrotron Light Source II (NSLS-II) is presented. Designed for hard X-ray photon-in/photon-out spectroscopy, the spectrometer achieves a resolution in the 0.5–2 eV range, depending on the element and/or emission line, providing detailed insights into the local electronic and geometric structure of materials. It serves a diverse user community, including fields such as physical, chemical, biological, environmental and materials sciences. This article details the mechanical design, alignment procedures and data-acquisition scheme of the spectrometer, with a particular focus on the continuous asynchronous data-acquisition approach that significantly enhances experimental efficiency.

The upgrade of the Swiss Light Source, called SLS 2.0, necessitates comprehensive updates to all 18 user front ends. This upgrade is driven by the increased power of the synchrotron beam, reduced floor space, changing source points, new safety regulations and enhanced beam properties, including a brightness increase by up to a factor of 40. While some existing front-end components are being thoroughly refurbished and upgraded for safety reasons, other components, especially those designed to tailor the new synchrotron beam, are being completely rebuilt. These new designs feature innovative and enhanced cooling systems to manage the high-power load and meet new requirements such as mechanical stability and compact footprints.

A novel in situ/operando method is introduced to measure the photon beam stability of synchrotron radiation based on orthogonal diffraction imaging of a Laue crystal/analyzer, which can decouple the energy/wavelength and Bragg angle of the photon beam using the dispersion effect in the diffraction process. The method was used to measure the energy jitter and drift of the photon beam on BL09B and BL16U at the Shanghai Synchrotron Radiation Facility. The experimental results show that this method can provide a fast way to measure the beam stability of different light sources including bending magnet and undulator with meV-level energy resolution and ms-level time response.

Geological samples are inherently multi-scale. Understanding their bulk physical and chemical properties requires characterization down to the nano-scale. A powerful technique to study the three-dimensional microstructure is X-ray tomography, but it lacks information about the chemistry of samples. To develop a methodology for measuring the multi-scale 3D microstructure of geological samples, correlative X-ray micro- and nanotomography were performed on two rocks followed by scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) analysis. The study was performed in five steps: (i) micro X-ray tomography was performed on rock sample cores, (ii) samples for nanotomography were prepared using laser milling, (iii) nanotomography was performed on the milled sub-samples, (iv) samples were mounted and polished for SEM analysis and (v) SEM imaging and compositional mapping was performed on micro and nanotomography samples for complimentary information. Correlative study performed on samples of serpentine and basalt revealed multiscale 3D structures involving both solid mineral phases and pore networks. Significant differences in the volume fraction of pores and mineral phases were also observed dependent on the imaging spatial resolution employed. This highlights the necessity for the application of such a multiscale approach for the characterization of complex aggregates such as rocks. Information acquired from the chemical mapping of different phases was also helpful in segmentation of phases that did not exhibit significant contrast in X-ray imaging. Adoption of the protocol used in this study can be broadly applied to 3D imaging studies being performed at the Advanced Light Source and other user facilities.

In synchrotron X-ray radiography, achieving high image resolution and an optimal signal-to-noise ratio (SNR) is crucial for the subsequent accurate image analysis. Traditional methods often struggle to balance these two parameters, especially in situ applications where rapid data acquisition is essential to capture specific dynamic processes. For quantitative image data analysis, using monochromatic X-rays is essential. A double multilayer monochromator (DMM) is successfully used for this aim at the BAMline, BESSY II (Helmholtz Zentrum Berlin, Germany). However, such DMMs are prone to producing an unstable horizontal stripe pattern. Such an unstable pattern renders proper signal normalization difficult and thereby causes a reduction of the SNR. We introduce a novel approach to enhance SNR while preserving resolution: dynamic tilting of the DMM. By adjusting the orientation of the DMM during the acquisition of radiographic projections, we optimize the X-ray imaging quality, thereby enhancing the SNR. The corresponding shift of the projection during this movement is corrected in post-processing. The latter correction allows a good resolution to be preserved. This dynamic tilting technique enables the homogenization of the beam profile and thereby effectively reduces noise while maintaining high resolution. We demonstrate that data captured using this proposed technique can be seamlessly integrated into the existing radiographic data workflow, as it does not need hardware modifications to classical X-ray imaging beamline setups. This facilitates further image analysis and processing using established methods.

X-ray ghost imaging with a crystal beam splitter has advantages in highly efficient imaging due to the simultaneous acquisition of signals from both the object beam and reference beam. However, beam splitting with a large field of view, uniform distribution and high correlation has been a great challenge up to now. Therefore, a dedicated beam splitter has been developed by optimizing the optical layout of a synchrotron radiation beamline and the fabrication process of a Laue crystal. A large field of view, consistent size, uniform intensity distribution and high correlation were obtained simultaneously for the two split beams. Modulated by a piece of copper foam upstream of the splitter, a correlation of 92% between the speckle fields of the object and reference beam and a Glauber function of 1.25 were achieved. Taking advantage of synthetic aperture X-ray ghost imaging (SAXGI), a circuit board of size 880 × 330 pixels was successfully imaged with high fidelity. In addition, even though 16 measurements corresponding to a sampling rate of 1% in SAXGI were used for image reconstruction, the skeleton structure of the circuit board can still be determined. In conclusion, the specially developed beam splitter is applicable for the efficient implementation of X-ray ghost imaging.

Soft X-ray spectroscopy is an important technique for measuring the fundamental properties of materials. However, for measurements of samples in the sub-millimetre range, many experimental setups show limitations. Position drifts on the order of hundreds of micrometres during thermal stabilization of the system can last for hours of expensive beam time. To compensate for drifts, sample tracking and feedback systems must be used. However, in complex sample environments where sample access is very limited, many existing solutions cannot be applied. In this work, we apply a robust computer vision algorithm to automatically track and readjust the sample position in the dozens of micrometres range. Our approach is applied in a complex sample environment, where the sample is in an ultra-high vacuum chamber, surrounded by cooled thermal shields to reach sample temperatures down to 2.5 K and in the center of a superconducting split coil. Our implementation allows sample-position tracking and adjustment in the vertical direction since this is the dimension where drifts occur during sample temperature change in our setup. The approach can be easily extended to 2D. The algorithm enables a factor of ten improvement in the overlap of a series of X-ray absorption spectra in a sample with a vertical size down to 70 µm. This solution can be used in a variety of experimental stations, where optical access is available and sample access by other means is reduced.

We present first hard X-ray photoelectron spectroscopy (HAXPES) results of aqueous salt solutions and dispersions of gold nanoparticles in liquid cells equipped with specially designed microfabricated thin silicon nitride membranes, with thickness in the 15–25 nm range, mounted in a high-vacuum-compatible environment. The experiments have been performed at the HAXPES endstation of the GALAXIES beamline at the SOLEIL synchrotron radiation facility. The low-stress membranes are fabricated from 100 mm silicon wafers using standard lithography techniques. Platinum alignment marks are added to the chips hosting the membranes to facilitate the positioning of the X-ray beam on the membrane by detecting the corresponding photoemission lines. Two types of liquid cells have been used, a static one built on an Omicron-type sample holder with the liquid confined in the cell container, and a circulating liquid cell, in which the liquid can flow in order to mitigate the effects due to beam damage. We demonstrate that the membranes are mechanically robust and able to withstand 1 bar pressure difference between the liquid inside the cell and vacuum, and the intense synchrotron radiation beam during data acquisition. This opens up new opportunities for spectroscopic studies of liquids.

The neutralization of acidic solutions containing U (IV) and Ce (III) at room temperature in glove box atmosphere and in the presence of dithionite results in coprecipitation of these elements as amorphous solid solutions CexU1–xO2±y. The solubilities of the precipitates with different mole fractions (x) of Ce(OH)3 (x = 0.01 or 0.1) were determined in 1 M NaClO4 solutions between pH 2.2 and 12.8 under reducing conditions. The solids were investigated by a variety of methods (chemical analysis, SEM-EDX, XRD, XPS, XAS) to determine the nature of the solid solutions formed, their composition and the valence state of Ce and U. X-ray photoelectron spectroscopy confirmed the oxidation states of the solids both before and after the equilibration as Ce (III) and U (IV). The amorphous coprecipitates reached equilibrium relatively fast (∼1 week). The release of Ce from the coprecipitates was totally dominated by the release of uranium over the whole pH range. The Ce concentrations decrease slightly with the decrease of Ce content in the solid, suggesting that CexU1–xO2±y solids behave thermodynamically as solid solutions. The concentrations of U in equilibrium with the coprecipitate were in excellent agreement with the solubility of UO2(s) under reducing conditions reported in the literature. The conditional solubility product of Ce(OH)3 from the coprecipitate was several orders of magnitude (∼4 in the near neutral pH range and ∼18 in the acidic range) lower than that of pure Ce(OH)3(s). The activities and activity coefficients of Ce(OH)3(s) in the coprecipitate were also estimated. Activity coefficients are much less than 1, indicating that the mixing of Ce(OH)3 with UO2 is highly favorable.

Hard X-ray microscopes with 20–30 nm spatial resolution ranges are an advanced tool for the inspection of materials at the nanoscale. However, the limited efficiency of the focusing optics, for example, a Fresnel zone plate (ZP) lens, can significantly reduce the power of a nanoprobe. Despite several reports on ZP lenses that focus hard X-rays with 20 nm resolution – mainly constructed by zone-doubling techniques – a systematic investigation into the limiting factors has not been reported. We report the structural effects on the focusing and imaging efficiency of 20–30 nm-resolution ZPs, employing a modified beam-propagation method. The zone width and the duty cycle (zone width/ring pitch) were optimized to achieve maximum efficiency, and a comparative analysis of the zone materials was conducted. The optimized zone structures were used in the fabrication of Pt-hydrogen silsesquioxane (HSQ) ZPs. The highest focusing efficiency of the Pt-HSQ-ZP with a resolution of 30 nm was 10% at 7 keV and >5% in the range 6–10 keV, whereas the highest efficiency of the Pt-HSQ-ZP with a resolution of 20 nm was realized at 7 keV with an efficiency of 7.6%. Optical characterization conducted at X-ray beamlines demonstrated significant enhancement of the focusing and imaging efficiency in a broader range of hard X-rays from 5 keV to 10 keV, demonstrating the potential application in hard X-ray focusing and imaging.

Autonomous methods to align beamlines can decrease the amount of time spent on diagnostics, and also uncover better global optima leading to better beam quality. The alignment of these beamlines is a high-dimensional expensive-to-sample optimization problem involving the simultaneous treatment of many optical elements with correlated and nonlinear dynamics. Bayesian optimization is a strategy of efficient global optimization that has proved successful in similar regimes in a wide variety of beamline alignment applications, though it has typically been implemented for particular beamlines and optimization tasks. In this paper, we present a basic formulation of Bayesian inference and Gaussian process models as they relate to multi-objective Bayesian optimization, as well as the practical challenges presented by beamline alignment. We show that the same general implementation of Bayesian optimization with special consideration for beamline alignment can quickly learn the dynamics of particular beamlines in an online fashion through hyperparameter fitting with no prior information. We present the implementation of a concise software framework for beamline alignment and test it on four different optimization problems for experiments on X-ray beamlines at the National Synchrotron Light Source II and the Advanced Light Source, and an electron beam at the Accelerator Test Facility, along with benchmarking on a simulated digital twin. We discuss new applications of the framework, and the potential for a unified approach to beamline alignment at synchrotron facilities.

The Australian Synchrotron Imaging and Medical Beamline (IMBL) uses a superconducting multipole wiggler (SCMPW) source, dual crystal Laue monochromator and 135 m propagation distance to enable imaging and computed tomography (CT) studies of large samples with mono-energetic radiation. This study aimed to quantify two methods for CT dose reduction: wiggler source operation at reduced magnetic field strength, and beam modulation with spatial filters placed upstream from the sample. Transmission measurements with copper were used to indirectly quantify the influence of third harmonic radiation. Operation at lower wiggler magnetic field strength reduces dose rates by an order of magnitude, and suppresses the influence of harmonic radiation, which is of significance near 30 keV. Beam shaping filters modulate the incident beam profile for near constant transmitted signal, and offer protection to radio-sensitive surface organs: the eye lens, thyroid and female breast. Their effect is to reduce the peripheral dose and the dose to the scanned volume by about 10% for biological samples of 35–50 mm diameter and by 20–30% for samples of up to 160 mm diameter. CT dosimetry results are presented as in-air measurements that are specific to the IMBL, and as ratios to in-air measurements that may be applied to other beamlines. As CT dose calculators for small animals are yet to be developed, results presented here and in a previous study may be used to estimate absorbed dose to organs near the surface and the isocentre.

HMRC has appointed

Italy-based unicorn Satispay has announced...

InComm Payments has acquired the digital gift card provider

Foreign exchange brand Travelex has announced its partners...

The Lufthansa Group has teamed up with

Mirakl has announced its partnership with

Paymentology has entered into a referral partnership with...

Tide, a UK-based business...

The inaugural edition of the Emerging Technologies and Trends in Identity Verification (IDV), KYC, and KYB Report 2024 offers a comprehensive overview of the key technology trends and best practices in digital onboarding for consumers and businesses in 2024.

 ‘The Road Ahead: Towards Seamless Payments Interoperability’, an eBook from Thunes, Visa, and The Paypers, explores how payments interoperability is reshaping the future of cross-border transactions.

Chinese fast-fashion retailer Shein has introduced its first...

Benedict Cumberbatch in “The Courier”; Credit: LIAM DANIEL / LIONSGATE / ROADSIDE ATTRACTIONS

This content is from Southern California Public Radio. View the original story at SCPR.org.

Vera Farmiga and Patrick Wilson in "The Conjuring: The Devil Made Me Do It"; Credit: Warner Bros. Pictures

This content is from Southern California Public Radio. View the original story at SCPR.org.

Still of Rita Moreno in the documentary “Rita Moreno: Just a Girl Who Decided to Go for It.”; Credit: Roadside Attractions

This content is from Southern California Public Radio. View the original story at SCPR.org.

Canada-based fintech firm Nuvei has partnered with

Token Payment Services (TOKEN) has announced that it obtained its...

Zilch, a fintech company operating an ad-subsidised payments...

TerraPay, a global money movement company,...

US-based digital payments provider Checkout.com has...

Africhange has announced that its Nigerian branch, Currenzo,...

Thunes, a global cross-border payments platform, has announced a...

FOMO Pay, a payment institution based in Singapore, has...

Source: Darren Aftahi 11/06/2024

Roth MKM analyst Darren Aftahi, in a research report published on November 5, 2024, maintained a Buy rating on Terawulf Inc. (WULF:NASDAQ) with a price target of US$7.50. The report follows TeraWulf's October production update and insights into its HPC capacity expansion plans.

Aftahi highlighted the company's HPC capacity development, stating, "WULF gained better insight into its supply chain for delivering ~72.5MW of HPC capacity by 2Q25, with the potential to generate ~US$90M in annualized revenue with US$60M+ in profit (exit run rate). Its 2.5MW concept building is now complete, and its 20MW facility is on schedule for 1Q25."

Regarding October's production metrics, the analyst noted, "WULF mined 150 BTC in October, up 7% m/m on a comparable basis to only Lake Mariner in September (140 BTC). The ending hash rate is now 8.1 EH/s (vs. 10) from the removal of Nautilus." He added that "machine efficiency is now 22 J/TH vs. the prior combined rate of ~24.6 J/TH."

The analyst observed operational improvements, commenting, "Avg. operating hash rate was ~6.8 or ~84%, slightly ahead of prior months (although reported in aggregate). Part of this is being driven by the accelerated replacement of older miners at Lake Mariner."

The report noted that upon reinstallation of damaged miners at Lake Mariner, the hash rate would increase to approximately 8.7 EH/s, though power cost per BTC increased about 5% month over month.

Roth MKM's valuation methodology is based on an EBITDA multiple approach. Aftahi explained, "We apply a ~24x multiple to our projected FY25 adj. EBITDA of ~US$120M to arrive at our price target of US$7.50."

The analyst outlined several risk factors, including Bitcoin price volatility, regulatory changes, unproven new business segments, capital requirements, weather impacts, competition, power contracts, and reliance on third-party suppliers.

In conclusion, Roth MKM's maintenance of their Buy rating and US$7.50 price target reflects confidence in TeraWulf's operational execution and growth potential in both Bitcoin mining and HPC capacity. The share price at the time of the report of US$5.98 represents a potential return of approximately 25.4% to the analyst's target price.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

Disclosures for Roth MKM, TeraWulf Inc., November 5, 2024

Regulation Analyst Certification ("Reg AC"): The research analyst primarily responsible for the content of this report certifies the following under Reg AC: I hereby certify that all views expressed in this report accurately reflect my personal views about the subject company or companies and its or their securities. I also certify that no part of my compensation was, is or will be, directly or indirectly, related to the specific recommendations or views expressed in this report.

Disclosures: Within the last twelve months, ROTH Capital Partners, or an affiliate to ROTH Capital Partners, has received compensation for investment banking services from TeraWulf, Inc.. Shares of TeraWulf, Inc. may be subject to the Securities and Exchange Commission's Penny Stock Rules, which may set forth sales practice requirements for certain low-priced securities.

Not Covered [NC]: ROTH Capital does not publish research or have an opinion about this security. ROTH Capital Partners, LLC expects to receive or intends to seek compensation for investment banking or other business relationships with the covered companies mentioned in this report in the next three months. The material, information and facts discussed in this report other than the information regarding ROTH Capital Partners, LLC and its affiliates, are from sources believed to be reliable, but are in no way guaranteed to be complete or accurate. This report should not be used as a complete analysis of the company, industry or security discussed in the report. Additional information is available upon request. This is not, however, an offer or solicitation of the securities discussed. Any opinions or estimates in this report are subject to change without notice. An investment in the stock may involve risks and uncertainties that could cause actual results to differ materially from the forward-looking statements. Additionally, an investment in the stock may involve a high degree of risk and may not be suitable for all investors. No part of this report may be reproduced in any form without the express written permission of ROTH. Copyright 2024. Member: FINRA/SIPC.

( Companies Mentioned: WULF:NASDAQ, )

In this Saturday, Sept. 6, 2014 file photo, Paris Barclay attends the LA Premiere Screening of "Sons Of Anarchy" at TCL Chinese Theatre, in Los Angeles. A new guild study says that women and minorities were largely shut out of the ranks of TV directors again last season. In a Wednesday, Sept. 17, 2014 statement, Directors Guild President Barclay said it can be "shockingly difficult" to persuade those who control industry hiring to make even small improvements.; Credit: Paul A. Hebert/Paul A. Hebert/Invision/AP

A new guild study says women and minorities were largely shut out of the ranks of TV directors again last season.

The Directors Guild of America report released Wednesday said employers have made no significant improvement in diversity hiring for TV series in the last four years.

According to the study, white males directed the vast majority of the 3,500 cable, broadcast and high-budget online episodes made for the 2013-14 season.

The same holds true for the three previous years, according to guild findings.

In a statement, Directors Guild President Paris Barclay said it can be "shockingly difficult" to persuade those who control industry hiring to make even small improvements.

The finale of the 2013 Americana Music Association Honors and Awards show.; Credit: Folk Alley

The 2014 Americana Music Awards are Wednesday at 5 p.m. Pacific/8 p.m. Eastern. You can watch the full show live from the Ryman Auditorium in Nashville, Tenn. below, including performances by Loretta Lynn, Jackson Browne, Emmylou Harris, Patty Griffin and more.

Read a full list of the nominees below:

Album of the Year

• Build Me Up From Bones by Sarah Jarosz
• The Lights From The Chemical Plant by Robert Ellis
• The River And The Thread by Rosanne Cash
• Southeastern by Jason Isbell

Artist of the Year

• Rosanne Cash
• Rodney Crowell
• Robert Ellis
• Jason Isbell

Duo/Group of the Year

• The Avett Brothers
• The Devil Makes Three
• Hard Working Americans
• Lake Street Dive
• The Milk Carton Kids

Song of the Year

• "Cover Me Up" by Jason Isbell
• "A Feather's Not A Bird" by Rosanne Cash
• "Ohio" by Patty Griffin
• "Only Lies" by Robert Ellis

Emerging Act of the Year

• Hurray For The Riff Raff
• Parker Millsap
• St. Paul & The Broken Bones

Graphic novelist and artist Charles Burns, at the Mohn Broadcast Center, 9/18/2014. He's just completed his trilogy with the new book Sugar Skull.; Credit: John Rabe

Graphic novelist Charles Burns stopped by the Mohn Broadcast Center to talk with Off-Ramp host John Rabe about "Sugar Skull," which completes the trilogy that includes "X'ed Out" and "The Hive."  He's doing a signing tonight (Thurday, Sept. 18) at Skylight Books, 1818 N. Vermont Avenue in Los Feliz.

Why the trilogy? Burns says, "I had finished another book, "Black Hole," which was this very long graphic novel, all in black and white, and I wanted to do something in color, so I conceived a series of books, based on a series of my life, late '70s, the Punk Era. It started that way, and then it turned into something else."

RELATED: Miniaturist Alan Wolfson, or "Honey! I shrunk the strip club!"

The look of Burns' books:

... is drawn from one of his childhood favorites, the Belgian Tintin, who had all sorts of politically incorrect adventures:

"It's called the clear-line school of comics. And it's exactly what it sounds like: very clear lines, but perfectly rendered in color."

If there's more shadow in Burns' books than in Herge's, that's because the lines between good and bad, dark and light, reality and unreality are blurrier in Burns. The trilogy moves back and forth in time and place, including between the normal world and a bizarre world in which a character named Johnny 23 struggles with many of the same issues the protagonist in the real world, Doug, faces... including a pregnant girlfriend.

(From Sugar Skull, by Charles Burns. )

Are they two separate stories or Doug's subconscious world? Burns won't say. "That's for the reader to figure out. I don't really ever clearly explain those things at all, and I like to leave those things open. Interpretation is great, as far as I'm concerned."

Burns turns 59 on Sept. 27. How does he like approaching 60? "As far as the day-to-day landscape, things are more settled in. But as far as my sweltering, swelling, itching brain, that hasn't changed at all unfortunately."

Lisa Emery, left, and Lois Smith are in the world premiere of Jordan Harrison’s “Marjorie Prime” at the Center Theatre Group/Mark Taper Forum. ; Credit: Craig Schwartz

Lois Smith has had a long and varied acting career. She made her Broadway debut in 1952 and three years later was cast opposite James Dean in “East of Eden.” She was in “Five Easy Pieces” with Jack Nicholson and — more recently — she had a role on HBO’s “True Blood.”

Now, the 83-year-old Smith is starring at the Mark Taper Forum in the world premiere of “Marjorie Prime” — a play by Jordan Harrison about aging, memory and artificial intelligence.

Smith spoke with The Frame's John Horn about the play and her role.

Interview Highlights

Smith on how "Marjorie Prime" addresses the notion of memory

"One character at some point says, 'I don't know what memory's made of. Is it sedimentary layers?' The play [is] not a meditation, but a riff, perhaps, on that subject. Jordan [Harrison, the playwright] said at some point, 'This play is the intersection of perhaps humanity and technology.' The play takes place a bit in the future. Not a long time — we'll all recognize ourselves very well — but that's one of its surprises."

Smith on the evolution of becoming a character

"It's been extremely interesting. I suppose in every play [the process] deepens and stretches out. This one, no doubt about it...it's elusive in a lot of ways and I think, 'Oh good, I'm getting there, I'm finding out.' And then I think, 'Oh, farther to go.'" 

Smith on how audience members of different ages react to the play's take on aging

"One friend saw it in regards to [her] mother, who's becoming forgetful. [That] mother saw her own very aged father. They laughed about what they each brought up, because they had just been sitting at the same performance of the same play."

Smith on her role, which isn't too physically taxing

"I'm not doing much walking around. I walk on, I walk off, I walk on — and that's about it. I sometimes say, 'It's almost as good as a bed part,' because I spend time in a recliner, which is pretty nice."

Kevin Smith with a room full of his own strain of pot, created for his new film, "Tusk." ; Credit: James Kim/KPCC

When Kevin Smith records his podcast, Smodcast, he says, "I'm usually blazed." Which, if you've heard the episode where Smith comes up with the entire story for his new film, "Tusk," it should come as no surprise.

The film is about a man who takes another man hostage and turns him into a walrus. While the movie itself doesn't mention or include any weed, Smith thought medical marijuana would be a nice complement to the viewing experience. 

A24, the film distribution company, came to Smith with a marketing idea: create strains of weed for the film. Smith thought it was genius. Buds and Roses — a cannabis dispensary in Studio City — was approached by Smith and his team to make medical marijuana specifically for the film. The dispensary came up with two strains called "Mr. Tusk" and "White Walrus." 

We met up with the director at Buds and Roses to see why the green substance was a perfect pairing for the film: 

Interview Highlights:

Smith knows that some people enjoy going to the movies stoned: 

"This movie, out of all movies, seems like a real head trip of a flick. So if they have their medical marijuana card, by all means, enjoy the movie. Don't feel the need to go back if you don't remember anything. It's not a gimmick to make them go twice or anything. But in a world where people are gonna smoke medicinal marijuana, having a 'Tusk' sticker on there just makes me smile. Kind of makes sense for this movie." 

How Fleetwood Mac and weed helped his writing:

"I put on Fleetwood Mac's 'Tusk' over and over on repeat and would just sit there and blaze while I wrote. And you know, I blaze in the way that I used to smoke cigarettes. So, I'll light it and put it in an ashtray, let it burn and stuff. So it fills the room like incense if you will. But, yeah, for a movie like 'Tusk,' I guess you gotta be pretty stoned to make the guy-who-makes-a-guy-into-a-walrus movie. And I'm kinda glad I did. It's weird. People are calling it the best movie I've ever made and I was like, 'Well, this is the only one I made stoned.' So I'm like, 'Guess what I'm doing, kids!'"

Smith used to be against drugs: 

"I smoked weed in my life, but I would never consider myself a stoner. In fact, I still had the '80s [attitude] lingering, 'Just say no,' and,  you know, 'Oh my lord! It's a drug!' It wasn't until I became older — age 38 — when I started smoking weed on a regular basis. I was like, 'This is not a drug. This is ridiculous! It grows in the Earth.' So once I got past the bias that was pounded into us in the '80s, suddenly I was like, 'Heavens. I like who I am here.' It doesn't make you a better person, kids. It doesn't make you more creative. What it does is it kind of knocks fear on its ass. You face your fears a little better." 

Disclaimer: Smith wants you to know that he does not endorse marijuana for anyone under 21:

"Kids, teenagers... I'm talking to you. The teenage brain is stunted by marijuana smoking so you guys have to wait 'til you're older. I didn't start smoking 'til I was 38 years old. I'm not saying wait 'til then. That was a stupid mistake on my behalf. But wait until you're legit. Wait until you're 21 before you start smoking." 

We explore a special class of periodic graphs, ladder graphs, whose edges can coincide when embedded vertices are moved. Many of these exhibit additional non-crystallographic graph symmetries.

The general equation of the δ direct methods is established and applied in its difference form to the definition of one of the two residuals that constitute the SMAR phasing algorithm. These two residuals use the absolute value of ρ and/or the zero conversion of negative Fourier ripples (≥50% of the unit-cell volume). Alternatively, when solved for ρ, the general equation provides a simple derivation of the already known δM tangent formula.

Source: Streetwise Reports 10/18/2024

American Salars Lithium Inc. (USLI:CSE; USLIF:OTC; Z3P:FWB; A3E2NY:WKN) announced it is strategically reviewing multiple Canadian mineral properties prospective for lithium close to recent pegmatite, or hard-rock, lithium discoveries.

The first project under review is about 150 kilometers north of Matagami, where there is a small town with a rail link to much of James Bay, and has the Billy Diamond Highway running through it.

American Salars said it's close to Q2 Metals Corp. (QTWOTSX-V; OTCQB:QUEXF) Cisco Lithium Project, which reported drill intercepts of 215.6 meters at 1.69% Li2O, including 64.6 meters at 2.29%. Also nearby are multiple projects owned by Sayona Mining Ltd (SYA:ASX), which is currently Canada's only lithium producer.

"Our primary objective remains the acquisition of low-cost lithium brine assets in Argentina while expanding our existing NI 43-101 lithium brine resources," said Chief Executive Officer and Director R. Nick Horsley. "We believe that Quebec-based hard rock lithium assets can now be acquired at deeply discounted prices and advanced with critical mineral flow through financing incentives in anticipation of the next lithium rally."

American Salars said it is reviewing additional projects close to Sayona, which will be subject to disclosure "once due diligence is completed and a deal is completed." The company stressed that its "intent to acquire property and current strategic review does not necessarily mean that a transaction will occur."

Current Assets Also in Argentina, Nevada

The company's existing portfolio of lithium deposits includes two NI 43-101-compliant Inferred Mineral Resource Estimates (MREs) consisting of 457,000 tonnes of lithium carbonate equivalent (LCE) at the Candela 2 Lithium Brine Project and a shared MRE at the Pocitos 1 Lithium Brine Project consisting of 760,000 tonnes LCE. The Pocitos MRE is shared with the neighboring Pocitos 2 property, which is not under contract or owned by American Salars, but the company noted that none of the drilling that makes up a partial basis for the MRE took place on the Pocitos 2 block. Both brine projects are located in Salta Province, Argentina.

Major mining company Rio Tino recently invested in Argentina by acquiring Argentina lithium producer Arcadium Lithium for US$6.7 billion, making the company the world's third-largest lithium producer.

American Salars recently released assay results from soil samples collected during its Phase 1 exploration program at its 100%-owned Black Rock South lithium project close to Tesla's Gigafactory in Nevada.

Technical Analyst Clive Maund wrote that the entire "San Emidio Desert basin is a highly prospective lithium exploration zone and is about 38 kilometers long and up to 11 kilometers wide at the widest point, with the central playa measuring about 8.5 kilometers north-south and 4.5 kilometers east-west."

Out of 38 samples, 33 recorded lithium concentration of more than 100 parts per million (ppm) or higher, the company said. The highest grade was 180.5 ppm with an average grade of 131 ppm across the 33 samples of the surface of the property.

Technical Analyst Clive Maund wrote that the entire "San Emidio Desert basin is a highly prospective lithium exploration zone and is about 38 kilometers long and up to 11 kilometers wide at the widest point, with the central playa measuring about 8.5 kilometers north-south and 4.5 kilometers east-west."*

"After a massive speculative runup in 2020 and especially in 2021, the lithium price fell victim to a severe bear market that ran from mid-2022 through the end of 2023," Maund continued. "By the end of last year, this bear market had exhausted itself, and a basing process began that has continued up to the present."

In addition to its location near the Gigafactory, Black Rock South is 93 miles southwest of Thacker and 215 miles northwest of the United States' only producing lithium mine, the Silver Peak lithium brine mine owned by Albermarle.

The Catalyst: More Growth Coming

Lithium is critical in the energy transition for its use in batteries for EVs and other applications. It also is used in electronics, medicine and other industries.

According to a report by Grand View Research, market size for the metal was estimated at US$31.75 billion last year and is projected to grow at a compound annual growth rate (CAGR) of 17.7% from this year through 2030.

"The automotive application segment is expected to witness substantial growth, driven by stringent regulations imposed by government bodies on ICE automakers to reduce carbon dioxide emissions from vehicles," researchers at Grand View said. "This has shifted the interest of automakers toward producing EVs, which is anticipated to benefit the demand for lithium and related products."

EVs and battery storage primarily will fuel future growth of the lithium market, Marin Katusa of Katusa Research wrote recently. He pointed out that all major electric vehicle batteries require lithium, about 1.55 pounds per kilowatt hour of battery capacity, on average.

"I think the data speaks for itself that there's more growth and opportunity on the horizon," Katusa wrote.

According to FastMarkets, prices for the metal have fallen over the past 18 months as weaker demand improved availability. However, this "has done little to deter the appetite for expansion," raw battery materials analyst Jordan Roberts told the publication.[OWNERSHIP_CHART-11095]

The consensus among market analysts points to a recovery in lithium prices in the fourth quarter of 2024, Fastmarkets reported.

"This optimism is grounded in expectations of increased activity . . . to meet end of year targets, strong battery production seen in March and April finally filtering through upstream and low inventory levels necessitating restocking," the website noted.

Ownership and Share Structure

American Salars said it has 28.8 million shares outstanding and 5.5 million warrants, according to the company.

As for insiders, the CEO Horsley owns about 1.83 million, or about 7.37%, with 4666,666 warrants. Strategic investor Hillcrest Merchant Partners owns 1 million shares or 4.03%. There are no institutional investors, and the rest is retail.

Its market cap is CA$4.79 million. It trades in a 52-week range of CA$0.45 and CA$0.08.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. American Salars Lithium Inc. has a consulting relationship with Street Smart an affiliate of Streetwise Reports. Street Smart Clients pay a monthly consulting fee between US$8,000 and US$20,000.
2. As of the date of this article, officers and/or employees of Streetwise Reports LLC (including members of their household) own securities of American Salars Lithium Inc.
3. Steve Sobek wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.
4. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

* Disclosure for the quote from the Clive Maund source June 17, 2024

1. For the quote (sourced on June 17, 2024), the Company has paid Street Smart, an affiliate of Streetwise Reports, US$1,500.
2. Author Certification and Compensation: [Clive Maund of clivemaund.com] is being compensated as an independent contractor by Street Smart, an affiliate of Streetwise Reports, for writing the article quoted. Maund received his UK Technical Analysts’ Diploma in 1989. The recommendations and opinions expressed in the article accurately reflect the personal, independent, and objective views of the author regarding any and all of the designated securities discussed. No part of the compensation received by the author was, is, or will be directly or indirectly related to the specific recommendations or views expressed.

Clivemaund.com Disclosures

The quoted article represents the opinion and analysis of Mr. Maund, based on data available to him, at the time of writing. Mr. Maund's opinions are his own, and are not a recommendation or an offer to buy or sell securities. As trading and investing in any financial markets may involve serious risk of loss, Mr. Maund recommends that you consult with a qualified investment advisor, one licensed by appropriate regulatory agencies in your legal jurisdiction and do your own due diligence and research when making any kind of a transaction with financial ramifications. Although a qualified and experienced stock market analyst, Clive Maund is not a Registered Securities Advisor. Therefore Mr. Maund's opinions on the market and stocks cannot be only be construed as a recommendation or solicitation to buy and sell securities.

( Companies Mentioned: USLI:CSE; USLIF:OTC; Z3P:FWB; A3E2NY:WKN, )