Due to climate change and rising global temperatures, the glaciers had been gradually thinning. When the glacier finally gave way, it sent a colossal amount of debris tumbling into the fjord, displacing enough material to fill around 10,000 Olympic-sized pools.

The second report of the Continuous Reporting System on International Migration in the Americas was launched at the OAS, Washington on January 17 2013

SICREMI is an initiative of the Organization of American States (OAS) that aims to contribute to the promotion and development of public policies that lead to improved migration management in the Americas through the facilitation of dialogue, cooperation, institutional strengthening and access to information.

A new Rococo 2 X-ray fluorescence detector was implemented into the cryogenic sample environment at the Hard X-ray Micro/Nano-Probe beamline P06 at PETRA III, DESY, Hamburg, Germany. A four sensor-field cloverleaf design is optimized for the investigation of planar samples and operates in a backscattering geometry resulting in a large solid angle of up to 1.1 steradian. The detector, coupled with the Xspress 3 pulse processor, enables measurements at high count rates of up to 106 counts per second per sensor. The measured energy resolution of ∼129 eV (Mn Kα at 10000 counts s−1) is only minimally impaired at the highest count rates. The resulting high detection sensitivity allows for an accurate determination of trace element distributions such as in thin frozen hydrated biological specimens. First proof-of-principle measurements using continuous-movement 2D scans of frozen hydrated HeLa cells as a model system are reported to demonstrate the potential of the new detection system.

Exact and approximate mathematical formulas of equatorial aberration for powder diffraction data collected with an Si strip X-ray detector in continuous-scan integration mode are presented. An approximate formula is applied to treat the experimental data measured with a commercial powder diffractometer.

Bicontinuous cubic structures in soft matter consist of two intertwining labyrinths separated by a partitioning layer. Combining experiments, numerical modelling and techniques in differential geometry, we investigate twinning defects in bicontinuous cubic structures. We first demonstrate that a twin boundary is most likely to occur at a plane that cuts the partitioning layer almost perpendicularly, so that the perturbation caused by twinning remains minimal. This principle can be used as a criterion to identify potential twin boundaries, as demonstrated through detailed investigations of mesoporous silica crystals characterized by diamond and gyroid surfaces. We then discuss that a twin boundary can result from a stacking fault in the arrangement of inter-lamellar attachments at an early stage of structure formation. It is further shown that enhanced curvature fluctuations near the twin boundary would cost energy because of geometrical frustration, which would be eased by a crystal distortion that is experimentally observed.

A gas- and vapour-pressure control system synchronized with the continuous data acquisition of millisecond high-resolution powder diffraction measurements was developed to study structural change processes in gas storage and reaction materials such as metal organic framework compounds, zeolite and layered double hydroxide. The apparatus, which can be set up on beamline BL02B2 at SPring-8, mainly comprises a pressure control system of gases and vapour, a gas cell for a capillary sample, and six one-dimensional solid-state (MYTHEN) detectors. The pressure control system can be remotely controlled via developed software connected to a diffraction measurement system and can be operated in the closed gas and vapour line system. By using the temperature-control system on the sample, high-resolution powder diffraction data can be obtained under gas and vapour pressures ranging from 1 Pa to 130 kPa in temperatures ranging from 30 to 1473 K. This system enables one to perform automatic and high-throughput in situ X-ray powder diffraction experiments even at extremely low pressures. Furthermore, this developed system is useful for studying crystal structures during the adsorption/desorption processes, as acquired by millisecond and continuous powder diffraction measurements. The acquisition of diffraction data can be synchronized with the control of the pressure with a high frame rate of up to 100 Hz. In situ and time-resolved powder diffraction measurements are demonstrated for nanoporous Cu coordination polymer in various gas and vapour atmospheres.

Exact and approximate formulas for equatorial aberration of a continuous-scan Si strip detector are compared.

Appendices B4 and B5 of Cayron [Acta Cryst. (2019), A75, 411–437] contain equations involving the point group and the metric tensor in which the equality symbol should be substituted by the inclusion symbol.

Here are 14 of the oldest continuously inhabited cities in the world.

New Integrated Control Center (ICC) for controlling and monitoring the entire continuous casting plant

Produce High Value Biochemicals at Investor Friendly Cost Effective Capex

Paul Nunes, executive director of research at the Accenture Institute for High Performance and coauthor of "Jumping the S-Curve."

Matthew Paden, MD, discusses his Pediatric Critical Care Medicine article: Recovery of Renal Function and Survival After Continuous Renal Replacement Therapy During Extracorporeal Membrane Oxygenation.

DALLAS, 1 de abril del 2020 — Algunos cardiólogos de Wuhan, China y otros países recomiendan a los pacientes con hipertensión arterial que continúen tomando sus medicamentos, aunque los efectos de algunos se hayan visto afectados por las infecciones ...

This paper describes a dataset and protocols for evaluating continuous speech separation algorithms. Most prior studies on speech separation use pre-segmented signals of artificially mixed speech utterances which are mostly emph{fully} overlapped, and the algorithms are evaluated based on signal-to-distortion ratio or similar performance metrics. However, in natural conversations, a speech signal is continuous, containing both overlapped and overlap-free components. In addition, the signal-based metrics have very weak correlations with automatic speech recognition (ASR) accuracy. We think that not only does this make it hard to assess the practical relevance of the tested algorithms, it also hinders researchers from developing systems that can be readily applied to real scenarios. In this paper, we define continuous speech separation (CSS) as a task of generating a set of non-overlapped speech signals from a extit{continuous} audio stream that contains multiple utterances that are emph{partially} overlapped by a varying degree. A new real recorded dataset, called LibriCSS, is derived from LibriSpeech by concatenating the corpus utterances to simulate a conversation and capturing the audio replays with far-field microphones. A Kaldi-based ASR evaluation protocol is also established by using a well-trained multi-conditional acoustic model. By using this dataset, several aspects of a recently proposed speaker-independent CSS algorithm are investigated. The dataset and evaluation scripts are available to facilitate the research in this direction.

In this paper we analyze a continuous version of the maximal covering location problem, in which the facilities are required to be interconnected by means of a graph structure in which two facilities are allowed to be linked if a given distance is not exceed. We provide a mathematical programming framework for the problem and different resolution strategies. First, we propose a Mixed Integer Non Linear Programming formulation, and derive properties of the problem that allow us to project the continuous variables out avoiding the nonlinear constraints, resulting in an equivalent pure integer programming formulation. Since the number of constraints in the integer programming formulation is large and the constraints are, in general, difficult to handle, we propose two branch-&-cut approaches that avoid the complete enumeration of the constraints resulting in more efficient procedures. We report the results of an extensive battery of computational experiments comparing the performance of the different approaches.

High-order entropy-stable discontinuous Galerkin (DG) methods for nonlinear conservation laws reproduce a discrete entropy inequality by combining entropy conservative finite volume fluxes with summation-by-parts (SBP) discretization matrices. In the DG context, on tensor product (quadrilateral and hexahedral) elements, SBP matrices are typically constructed by collocating at Lobatto quadrature points. Recent work has extended the construction of entropy-stable DG schemes to collocation at more accurate Gauss quadrature points.

In this work, we extend entropy-stable Gauss collocation schemes to non-conforming meshes. Entropy-stable DG schemes require computing entropy conservative numerical fluxes between volume and surface quadrature nodes. On conforming tensor product meshes where volume and surface nodes are aligned, flux evaluations are required only between "lines" of nodes. However, on non-conforming meshes, volume and surface nodes are no longer aligned, resulting in a larger number of flux evaluations. We reduce this expense by introducing an entropy-stable mortar-based treatment of non-conforming interfaces via a face-local correction term, and provide necessary conditions for high-order accuracy. Numerical experiments in both two and three dimensions confirm the stability and accuracy of this approach.

The invention relates to a method for producing nitrobenzene, in which crude nitrobenzene is first produced by nitrating benzene and said crude nitrobenzene is then washed in succession in at least one acid wash, in at least one alkaline wash and in at least one neutral wash, at least one additional wash with an aqueous solution of a potassium salt being interposed between the last alkaline wash and the first neutral wash.

The invention relates to a continuous method for producing esters, in which at least one polyol ester of formula (I) (R1—COO)mR2 (I), where R1 represents hydrogen or an optionally substituted hydrocarbon group containing 1 to 50 carbon atoms, R2 represents an optionally substituted hydrocarbon group containing 2 to 10 carbon atoms, and m represents a number from 2 to 10 and is smaller than or equal to the number of carbon atoms in R2, is reacted with at least one monohydric alcohol of formula (II) R3—OH (II), where R3 represents an optionally substituted hydrocarbon group containing 1 to 30 C atoms, using microwave radiation in a reaction tube, the longitudinal axis of which extends in the direction of propagation of the microwaves of a single-mode microwave applicator, so as to obtain at least one ester of formula (III) R1—COO—R3 (III), where R1 and R3 have the meanings indicated above.

A memory device includes a semiconductor channel, a tunnel dielectric layer located over the semiconductor channel, a first charge trap including a plurality of electrically conductive nanodots located over the tunnel dielectric layer, dielectric separation layer located over the nanodots, a second charge trap including a continuous metal layer located over the separation layer, a blocking dielectric located over the second charge trap, and a control gate located over the blocking dielectric.

A method and apparatus for method of continuously producing 1,1,1,2,3-pentafluoropropane with high yield is provided. The method includes (a) bringing a CoF3-containing cobalt fluoride in a reactor into contact with 3,3,3-trifluoropropene to produce a CoF2-containing cobalt fluoride and 1,1,1,2,3-pentafluoropropane, (b) transferring the CoF2-containing cobalt fluoride in the reactor to a regenerator and bringing the transferred CoF2-containing cobalt fluoride into contact with fluorine gas to regenerate a CoF3-containing cobalt fluoride, and (c) transferring the CoF3-containing cobalt fluoride in the regenerator to the reactor and employing the transferred CoF3-containing cobalt fluoride in Operation (a). Accordingly, the 1,1,1,2,3-pentafluoropropane can be continuously produced with high yield from the 3,3,3-trifluoropropene using a cobalt fluoride (CoF2/CoF3) as a fluid catalyst, thereby improving the reaction stability and readily adjusting the optimum conversion rate and selectivity.

A process is disclosed for producing tertiary alcohols by radical addition of secondary alcohols to alkenes. The reaction is carried out as a continuous process in the presence of an organic peroxide as a radical initiator and during a mean contact time of the reaction mixture of up to a maximum of 1 hour.

A method for continuously preparing a carboxylic acid ester is disclosed. In the method of the present invention, a vertical reactor is filled with a solid catalyst, a carboxylic acid and an alcohol are introduced into a lower part of the vertical reactor, esterification is performed to form an esterized mixture, the esterized mixture is output from an upper part of the vertical reactor, and distillation is performed to isolate the carboxylic acid ester. The method of the present invention is simple, easily controlled and environmental friendly, and has significantly high conversion rate and selectivity.

A continuous centrifuge includes: a cylindrical rotor configured to separate a specimen; a centrifuging chamber accommodating the rotor; a driving unit configured to rotate the rotor; a specimen line configured to continuously supply and discharge the specimen to and from the rotor during rotation of the rotor; and a controller configured to control the driving unit. The control unit has a cleansing mode which flows a liquid chemical through the specimen line so as to conduct sterilization and/or cleansing while rotating the rotor.

A method for tracking a user's movements between network addresses can include, subsequent to a request for a (current) network address from a user, receiving the network address and an identifier for a region associated with the network address. The method can also include locating a record that contains the identifier for the region and a time that immediately precedes the request for the network address from the user. The record may further contain a prior network address. The method can further include generating an entry for a table that includes the identifier for the region, the current network address, and the prior network address. A server computer or a client computer can generate the entry. Improved accountability and improved user profile accuracy can be obtained with the method. A data processing system readable medium can comprise code that includes instructions for carrying out the method.

A vehicle powertrain has an engine, a driving shaft having a passage defined therein, a driven shaft, a pump, a hydraulic fluid reservoir, and a CVT. A driving pulley of the CVT includes a fixed sheave and a movable sheave disposed on the driving shaft for rotation therewith, a spring biasing a movable sheave away from the fixed sheave, and a CVT chamber fluidly communicating with the passage of the driving shaft. The pump supplies hydraulic fluid from the reservoir to the passage in the driving shaft. The hydraulic fluid flows from the passage to the CVT chamber to create a hydraulic pressure in the CVT chamber. The hydraulic pressure in the CVT chamber biases the movable sheave toward the fixed sheave.

An energy harvesting system comprises a first region having a first temperature and a second region. A conduit is located at least partially within the first region. A heat engine configured for converting thermal energy to mechanical energy includes a shape memory alloy forming at least one generally continuous loop. The shape memory alloy is disposed in heat exchange contact with the first region and the second region. The shape memory alloy is driven to rotate around at least a portion of the conduit by the response of the shape memory alloy to the temperature difference between the first region and the second region. At least one pulley is driven by the rotation of the shape memory alloy, and the at least one pulley is operatively connected to a component to thereby drive the component.

A continuously variable transmission for a vehicle comprises a primary pulley, a secondary pulley, and a belt entrained around both pulleys in an opposite manner between the fixed and movable sheaves thereof. One pulley carries a selectively deployable stop that may be placed into position to mechanically limit the range of motion between the fixed and movable sheaves. This establishes an actual maximum transmission ratio that is larger than the nominal minimum transmission ratio but smaller than the nominal maximum transmission ratio achievable by the transmission during normal operation thereof. When such a transmission is used on a utility vehicle attached to a substance dispensing applicator operatively driven by the vehicle's engine, the application rate stays substantially constant despite changes in engine speed when the user keeps the transmission upshifted to the actual maximum transmission ratio set by the position of the deployed stop.

A belt-type continuously variable transmission for a vehicle includes: a primary pulley including a first fixed sheave fixed to an input shaft, and a first movable sheave relatively non-rotatable and relatively movable in axial direction to the input shaft due to spline-fitting of a female spline formed on an inner circumferential portion thereof to a male spline formed on the input shaft; a secondary pulley including a second fixed sheave fixed to an output shaft in parallel with the input shaft, and a second movable sheave relatively non-rotatable and relatively movable in the axial direction to the output shaft due to spline-fitting of a female spline formed on an inner circumferential portion thereof to a male spline formed on the output shaft; and a transmission belt, the belt-type continuously variable transmission for a vehicle disposed with at least one of a first groove width defining portion disposed on the primary pulley for defining a maximum groove width of the first pulley groove and a second groove width defining portion disposed on the secondary pulley for defining a maximum groove width of the second pulley groove, the first groove width defining portion and the second groove width defining portion being disposed on one shaft of the input shaft and the output shaft, and the other shaft having a uniform shaft diameter in an range of sliding of the first movable sheave or the second movable sheave in the axial direction except a site with the male spline formed, the other shaft being disposed on the opposite side to the one shaft.

A belt-driven continuously variable transmission having a downsized torque cam assembly for creating forward thrust to push a movable sheave toward a fixed sheave. The belt-driven continuously variable transmission is adapted to output a torque while changing a speed ratio continuously by altering an effective diameter position of a driving belt. The belt-driven continuously variable transmission is comprised of: an output gear, which is fitted onto the rotary shaft of the driven pulley to output the torque while being allowed to rotate relatively; a piston, which is fitted onto the rotary shaft of the driven pulley between the movable sheave and the output gear while being allowed to rotate integrally with the movable sheave and to reciprocate in an axial direction of the rotary shaft, and which increases an internal pressure of the hydraulic chamber by moving toward the movable sheave; and a torque cam assembly, which is interposed between the piston and the output gear, and which pushes the piston toward the movable sheave when the torque transmitted through the driven pulley is increased.

A machine for continuous casting of pre-mortared masonry panels includes a rotatable continuous mold for continuously forming pre-mortared masonry panels and an application system for applying polymeric material to the continuous mold as the continuous mold rotates. The machine also includes a brick setter system for setting bricks onto the polymeric material as the continuous mold rotates. The machine further includes a cutting device for cutting the bricks and polymeric material into panels to form the pre-mortared masonry panels.

A continuously variable transmission oil composition comprising a base oil and at least one phosphorous compound in such an amount that the phosphorus in the phosphorus compound accounts for 0.005 to 0.15 mass % of the total mass of the composition and wherein the continuously variable transmission oil composition has a friction coefficient from 0.146 to 0.164 when tested according to ASTM D2714.

Provided is a lubricating oil composition containing a base oil which includes a mineral oil and/or a synthetic oil, and compounded therein, (A) at least one phosphorus-containing compound selected from phosphoric acid monoesters, phosphoric acid diesters and phosphorous acid monoesters, each having a C1 to C8 hydrocarbon group or groups and (B) a tertiary amine compound having C6 to C10 hydrocarbon groups as substituents thereof. The lubricating oil composition provides both a high metal to metal friction coefficient and an excellent wear resistance and is suitably used in a continuously variable transmission.

A modular process for organosolv fractionation of lignocellulosic feedstocks into component parts and further processing of said component parts into one or more of a de-lignified cellulose stream, a sugar stream, small-chain alcohol streams and four structurally distinct classes of lignin derivatives. The modular process comprises a first processing module configured for digesting lignocellulosic feedstocks with an organic solvent thereby producing a cellulosic solids fraction and a liquid fraction, a second processing module configured for recovering small-chain alcohols and optionally a first class of lignin derivatives from the cellulosic solids fraction, a third processing module configured for recovering from the liquid fraction at least one of a second class and a third class of lignin derivatives or mixtures thereof, and waste stream comprising a fourth class of lignin derivatives. The fourth processing module may optionally recover the fourth class of lignin derivatives.

The present invention provides a shaft high temperature continuous graphitizing furnace comprising a furnace body comprising a feeding inlet and a discharging outlet, an electrode pair, a cooling system and a discharging device; the furnace body is designed to be a shaft cylindrical structure; the electrode pair is provided within the furnace body and comprise an upper electrode and a lower electrode, the upper electrode is located below the feeding inlet, and an umbrella or cone table shape electric field having a lower cross section area greater than its upper cross section area arises between the upper electrode and eh lower electrode; and the cooling system is located between the lower electrode and the discharging outlet. For the shaft high temperature continuous graphitizing furnace of the present invention, a perpendicularly placed column electrode is used as the upper electrode, a horizontally placed circular hollow electrode is used as the lower electrode, an umbrella high temperature area is formed between the electrode pair, and the natural flow law of an object is used to have materials pass a high temperature graphitizing area and then discharged, which ensures the quality of the product.

A control device continuously variable transmission for vehicle according to the present invention includes a continuously variable transmission mechanism capable of continuously changing a speed ratio, a sub-transmission mechanism provided in series with the continuously variable transmission mechanism, including a first gear position and a second gear position having a smaller speed ratio than the first gear position as forward gear positions and adapted to switch between the first gear position and the second gear position by selectively engaging or releasing a plurality of frictional engagement elements, and a transmission control unit wherein a vehicle is stopped with the gear position of the sub-transmission mechanism kept in the second gear position when being stopped in a state where the gear position of the sub-transmission mechanism is in the second gear position.

Inventive embodiments are directed to components, subassemblies, systems, and/or methods for continuously variable transmissions (CVT). In one embodiment, a main axle is adapted to receive a shift rod that cooperates with a shift rod nut to actuate a ratio change in a CVT. In another embodiment, an axial force generating mechanism can include a torsion spring, a traction ring adapted to receive the torsion spring, and a roller cage retainer configured to cooperate with the traction ring to house the torsion spring. Various inventive power roller-leg assemblies can be used to facilitate shifting the ratio of a CVT. Embodiments of a hub shell and a hub cover are adapted to house components of a CVT and, in some embodiments, to cooperate with other components of the CVT to support operation and/or functionality of the CVT. Among other things, shift control interfaces and braking features for a CVT are disclosed.

Inventive embodiments are directed to components, subassemblies, systems, and/or methods for continuously variable transmissions (CVT). In one embodiment, a control system is adapted to facilitate a change in the ratio of a CVT. In another embodiment, a control system includes a stator plate configured to have a plurality of radially offset slots. Various inventive traction planet assemblies and stator plates can be used to facilitate shifting the ratio of a CVT. In some embodiments, the traction planet assemblies include planet axles configured to cooperate with the stator plate. In one embodiment, the stator plate is configured to rotate and apply a skew condition to each of the planet axles. In some embodiments, a stator driver is operably coupled to the stator plate. Embodiments of a traction sun are adapted to cooperate with other components of the CVT to support operation and/or functionality of the CVT. Among other things, shift control interfaces for a CVT are disclosed.

Inventive embodiments are directed to components, subassemblies, systems, and/or methods for infinitely variable transmissions (IVT). In one embodiment, a control system is adapted to facilitate a change in the ratio of an IVT. In another embodiment, a control system includes a carrier member configured to have a number of radially offset slots. Various inventive carrier members and carrier drivers can be used to facilitate shifting the ratio of an IVT. In some embodiments, the traction planet assemblies include planet axles configured to cooperate with the carrier members. In one embodiment, the carrier member is configured to rotate and apply a skew condition to each of the planet axles. In some embodiments, a carrier member is operably coupled to a carrier driver. In some embodiments, the carrier member is configured to couple to a source of rotational power. Among other things, shift control interfaces for an IVT are disclosed.

A toroidal continuously variable transmission includes: an input disk; an output disk; a plurality of power rollers; a plurality of trunnions; an oil pump; a pressing hydraulic mechanism that moves and brings the input disk and output disk closer to each other; a shifting hydraulic mechanism that moves the trunnions forward and rearward; and a hydraulic control device that controls the pressing hydraulic mechanism and the shifting hydraulic mechanism by oil pressure. The hydraulic control device has an oil pressure regulation unit that sets an oil pressure in a shifting hydraulic line that is a hydraulic source of the shifting hydraulic mechanism to an oil pressure at which shifting control can be performed by the shifting hydraulic mechanism till the transmission of power between the input disk and output disk is interrupted when the operation of the oil pump is stopped.