TV Star Anushka Sen Short Film 'Sammaditthi' Is Trending On YouTube

Family, Short Film of Amitabh Bachchan, Rajnikanth, Ranbir Kapoor, Priyanka Chopra, Alia Bhatt

Winds are from the West at 24.2 gusting to 34.5 MPH (21 gusting to 30 KT). The pressure is 1012.0 mb and the humidity is 50%. The wind chill is 24. Last Updated on May 9 2020, 11:54 am EDT.

As the rest of the world is suffering from the COVID-19 pandemic, things seem to be looking up in China! The smartphone companies have moved to digital mode to launch their products.  Xiaomi is the latest to launch a new product from its Redmi brand, the Redmi Airdots S true wireless earphones. The Redmi AirDots […]

The post Redmi Airdots S Wireless Earphones Launched For Rs 1100! Is This A Gamechanger? first appeared on Trak.in . Trak.in Mobile Apps: Android | iOS.

Researchers highlight risk of asymptomatic infection, as Europe begins easing lockdown

• Coronavirus – latest updates
• See all our coronavirus coverage

More than 10 times as many people in Germany as thought may have been infected with coronavirus, researchers have said, as Italy led swathes of Europe out of lockdown and officials said the continent’s outbreak was mostly past its peak.

Researchers from Bonn University said on Monday that their preliminary study, based on fieldwork in the town of Gangelt in Heinsberg municipality, which had one of Germany’s highest death tolls, showed the risk of infection by asymptomatic carriers.

Coronavirus has infected more than 3.5 million people and caused nearly 250,000 deaths worldwide, according to the Johns Hopkins University tracker.

China’s state broadcaster CCTV attacked the US secretary of state’s “insane and evasive remarks” on the origins of the pandemic. Mike Pompeo said there was “enormous evidence” to show the virus originated in a lab in China.

As Donald Trump presses states to reopen their economies, his administration is privately projecting daily deaths will almost double to about 3,000 by 1 June, according to an internal document seen by the New York Times.

Japan’s prime minister, Shinzo Abe, extended the country’s national state of emergency to 31 May, adding that he would consider lifting it earlier if experts decided that was possible based on regional infection trends.

World leaders, with the exception of Trump, stumped up nearly €7.4bn (£6.5bn) to research Covid-19 vaccines and therapies, pledging the money would also be used to distribute any vaccine to poor countries on time and equitably.

Figures from human rights commissioner paint different picture to that provided by police

• Coronavirus – latest updates
• See all our coronavirus coverage

Reported cases of domestic violence in Russia have more than doubled during the country’s coronavirus lockdown, according to the Russian human rights commissioner, who painted a different picture to that provided by police data.

Complaints and reports made to Russian non-governmental organisations spiked from roughly 6,000 in March to more than 13,000 in April, Tatyana Moskalkova said on Tuesday. “The picture is rather non-optimistic,” the RIA Novosti news agency quoted her as saying.

Related: 'Calamitous': domestic violence set to soar by 20% during global lockdown

Related: How the killing of an abusive father by his daughters fuelled Russia's culture wars

Lewis Hamilton has said the prospect of taking part in a Formula One race without fans leaves him with an "empty feeling", but the six-time champion agreed it is better than no racing at all.

Different players, very different contracts. Some guys have deals that are shutdown-proof. Others? They have more to prove.

Michigan coach Jim Harbaugh has made an open-letter proposal suggesting more flexibility for players considering the jump from college to the NFL, including returning to college if they go undrafted.

Test chips are becoming more widespread and more complex at advanced process nodes as design teams utilize early silicon to diagnose problems prior to production. But this approach also is spurring questions about whether this approach is viable at 7nm and 5nm, due to the rising cost of prototyping advanced technology, such as mask tooling and wafer costs.

Semiconductor designers have long been making test chips to validate test structures, memory bit cells, larger memory blocks, and precision analog circuits like current mirrors, PLLs, temperature sensors, and high-speed I/Os. This has been done at 90nm, 65nm, 40nm, 32nm, 28nm, etc., so having test chips at 16nm, 7nm, or finer geometries should not be a surprise. Still, as costs rise, there is debate about whether those chips are over-used given advancements in tooling, or whether they should be utilized even more, with more advanced diagnostics built into them.

Modern EDA tools are very good. You can simulate and validate almost anything with certain degree of accuracy and correctness. The key to having good and accurate tools and accurate results (for simulation) is the quality of the foundry data provided. The key to having good designs (layouts) is that the DRC deck must be of high quality and accurate and must catch all the things you are not supposed to do in the layout. Most of the challenges in advanced node is in the FEOL where semiconductor physics and lithography play outsize roles. Issues that were not an issue at more mature nodes can manifest themselves as big problems at 7nm or 5nm. Process variation across the wafer and variation across a large die also present problems that were of no consequence in more mature nodes.

The real questions to be asked are as follows:

What is the role of test chips in SoC designs?

1. Do all hard IP require test chips for validation?
2. Are test chips more important at advanced nodes compared to more mature nodes?
3. Is the importance of test chip validation relative to the type of IP protocols?
4. What are the risks if I do not validate in silicon?

In complex SoC designs, there are many high-performance protocols such as LPDDR4/4x PHY, PCIe4 PHY, USB3.0 PHY, 56G/112G SerDes, etc. Each one of these IP are very complex in and by itself. If there is any chance of failure that is not detected prior to SoC (tapeout) integration, the cost of retrofit is huge. This is why the common practice is to validate each one of these complex IP in silicon before committing to use such IP in chip integration. The test chips are used to validate that the IP are properly designed and meet the functional specifications of the protocols. They are also used to validate if sufficient margins are designed into the IP to mitigate variances due to process tolerances. All high-performance hard IP go through this test chip/silicon validation process. Oftentimes, marginality is detected at this stage. In advanced nodes, it is also important to have the test chips built under different process corners. This is intended to simulate process variations in production wafers so as to maximize yields. Advanced protocols such as 112G, GDDR6, HBM2, and PCIe4 are incredibly complex and sensitive to process variations. It is almost impossible to design these circuits and try to guarantee their performance without going through the test chip route.

Besides validating performance of the IP protocols, test silicon is also used to validate robustness of ESD structures, sensitivity to latch up, and performance degradation over wide temperature ranges. All these items are more critical in advanced nodes than more mature modes. Test chips are vehicles to guarantee design integrity in bite-size chunks. It is better to deal with any potential issues in smaller blocks than to try to fix them in the final integrated SoC.

Test chips will continue to play a vital role in helping IP and SoC teams lower the risk of their designs, and assuring optimal quality and performance in the foreseeable future. They are not going away!

To read more, please visit https://semiengineering.com/test-chips-play-larger-role-at-advanced-nodes/

This is the 24th installment of The Rationalist, my column for the Times of India.

Back in the last decade, I was a cricket journalist for a few years. Then, around 12 years ago, I quit. I was jaded as hell. Every game seemed like déjà vu, nothing new, just another round on the treadmill. Although I would remember her fondly, I thought me and cricket were done.

And then I fell in love again. Cricket has changed in the last few years in glorious ways. There have been new ways of thinking about the game. There have been new ways of playing the game. Every season, new kinds of drama form, new nuances spring up into sight. This is true even of what had once seemed the dullest form of the game, one-day cricket. We are entering into a brave new world, and the team leading us there is England. No matter what happens in the World Cup final today – a single game involves a huge amount of luck – this England side are extraordinary. They are the bridge between eras, leading us into a Golden Age of Cricket.

I know that sounds hyperbolic, so let me stun you further by saying that I give the IPL credit for this. And now, having woken up you up with such a jolt on this lovely Sunday morning, let me explain.

Twenty20 cricket changed the game in two fundamental ways. Both ended up changing one-day cricket. The first was strategy.

When the first T20 games took place, teams applied an ODI template to innings-building: pinch-hit, build, slog. But this was not an optimal approach. In ODIs, teams have 11 players over 50 overs. In T20s, they have 11 players over 20 overs. The equation between resources and constraints is different. This means that the cost of a wicket goes down, and the cost of a dot ball goes up. Critically, it means that the value of aggression rises. A team need not follow the ODI template. In some instances, attacking for all 20 overs – or as I call it, ‘frontloading’ – may be optimal.

West Indies won the T20 World Cup in 2016 by doing just this, and England played similarly. And some sides began to realise was that they had been underestimating the value of aggression in one-day cricket as well.

The second fundamental way in which T20 cricket changed cricket was in terms of skills. The IPL and other leagues brought big money into the game. This changed incentives for budding cricketers. Relatively few people break into Test or ODI cricket, and play for their countries. A much wider pool can aspire to play T20 cricket – which also provides much more money. So it makes sense to spend the hundreds of hours you are in the nets honing T20 skills rather than Test match skills. Go to any nets practice, and you will find many more kids practising innovative aggressive strokes than playing the forward defensive.

As a result, batsmen today have a wider array of attacking strokes than earlier generations. Because every run counts more in T20 cricket, the standard of fielding has also shot up. And bowlers have also reacted to this by expanding their arsenal of tricks. Everyone has had to lift their game.

In one-day cricket, thus, two things have happened. One, there is better strategic understanding about the value of aggression. Two, batsmen are better equipped to act on the aggressive imperative. The game has continued to evolve.

Bowlers have reacted to this with greater aggression on their part, and this ongoing dialogue has been fascinating. The cricket writer Gideon Haigh once told me on my podcast that the 2015 World Cup featured a battle between T20 batting and Test match bowling.

This England team is the high watermark so far. Their aggression does not come from slogging. They bat with a combination of intent and skills that allows them to coast at 6-an-over, without needing to take too many risks. In normal conditions, thus, they can coast to 300 – any hitting they do beyond that is the bonus that takes them to 350 or 400. It’s a whole new level, illustrated by the fact that at one point a few days ago, they had seven consecutive scores of 300 to their name. Look at their scores over the last few years, in fact, and it is clear that this is the greatest batting side in the history of one-day cricket – by a margin.

There have been stumbles in this World Cup, but in the bigger picture, those are outliers. If England have a bad day in the final and New Zealand play their A-game, England might even lose today. But if Captain Morgan’s men play their A-game, they will coast to victory. New Zealand does not have those gears. No other team in the world does – for now.

But one day, they will all have to learn to play like this.

© 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic

As a leading venture capitalist in the electronics technology, as well as CEO of Cadence, Lip-Bu Tan has unique insights into ongoing changes that will impact EDA providers and users. Tan shared some of those insights in a “fireside chat” with Ed Sperling, editor in chief of Semiconductor Engineering, at the Design Automation Conference (DAC 2015) on June 9.

Topics of this discussion included industry consolidation, the need for more talent and more startups, Internet of Things (IoT) opportunities and challenges, the shift from ICs to full product development, and the challenges of advanced nodes. Following are some excerpts from this conversation, held at the DAC Pavilion theater on the exhibit floor.

Ed Sperling (left) and Lip-Bu Tan (right) discuss trends in semiconductors and EDA

Q: As you look out over the semiconductor and EDA industries these days, what worries you most?

Tan: At the top of my list is all the consolidation that is going on. Secondly, chip design complexity is increasing substantially. Time-to-market pressure is growing and advanced nodes have challenges.

The other thing I worry about is that we need to have more startups. There’s a lot of innovation that needs to happen. And this industry needs more top talent. At Cadence, we have a program to recruit over 10% of new hires every year from college graduates. We need new blood and new ideas.

Q: EDA vendors were acquiring companies for many years, but now the startups are pretty much gone. Where does the next wave of innovation come from?

Tan: I’ve been an EDA CEO for the last seven years and I really enjoy it because so much innovation is needed. System providers have very big challenges and very different needs. You have to find the opportunities and go out and provide the solutions.

The opportunities are not just in basic tools. Massive parallelism is critical, and the power challenge is huge. Time to market is critical, and for the IoT companies, cost is going to be critical. If you want to take on some good engineering challenges, this is the most exciting time.

Q: You live two lives—you’re a CEO but you’re also an investor. Where are the investments going these days and where are we likely to see new startups?

Tan: Clearly everybody is chasing the IoT. There is a lot of opportunity in the cloud, in the data center. Also, I’m a big believer in video, so I back companies that are video related. A big area is automotive. ADAS [Advanced Driver Assistance Systems] is a tremendous opportunity.

These companies can help us understand how the industry is transforming, and then we can provide solutions, either in terms of IP, tools, or the PCB. Then we need to connect from the system level down to semiconductors. I think it’s a different way to design.

Q: What happens as we start moving from companies looking to design a semiconductor to system companies who are doing things from the perspective that we have this purpose for our software?

Tan: We are extending from EDA to what we call system design enablement, and we are becoming more application driven. The application at the system level will drive the silicon design. We need to help companies look at the whole system including the power envelope and signal integrity. You don’t want to be in a position where you design a chip all the way to fabrication and then find the power is too high.

We help the customers with hardware/software co-design and co-verification. We have a design suite and a verification suite that can provide customers with high-level abstractions, as well as verify IP blocks at the system level. Then we can break things down to the component level with system constraints in mind, and drive power-aware, system-aware design.

We are starting to move into vertical markets. For example, medical is a tremendous opportunity.

Q: How does this approach change what you provide to customers?

Tan: Every year I spend time meeting with customers. I think it is very important to understand what they are trying to design, and it is also important to know the customer’s customer requirements. We might say, “Wait a minute, for this design you may want to think about power or the library you’re using.” We help them understand what foundry they should use and what process they should use. They don’t view me as a vendor—they view me as a partner.

We also work very closely with our IP and foundry partners. We work as one team—the ultimate goal is customer success.

Q: Is everybody going to say, FinFETs are beautiful, we’re going to go down to 10nm or 7nm—or is it a smaller number of companies who will continue down that path?

Tan: Some of the analog/mixed-signal companies don’t need to go that far. We love those customers—we have close to 50% of that business. But we also have customers in the graphics or processor area who are really pushing the envelope, and need to be in 16nm, 14nm, or 10nm. We work very closely with those guys to make sure they can go into FinFETs.

We always want to work with the customer to make sure they have a first-time silicon success. If you have to do a re-spin, you miss the opportunity and it’s very costly.

Q: There’s a new market that is starting to explode—IoT. How real is that world to you? Everyone talks about large numbers, but is it showing up in terms of tools?

Tan: Everybody is talking about huge profits, but a lot of the time I think it is just connecting old devices that you have. Billions of units, absolutely yes, but if you look close enough the silicon percentage of that revenue is very tiny. A lot of the profit is on the service side. So you really need to look at the service killer app you are trying to provide.

What’s most important to us in the IoT market is the IP business. That’s why we bought Tensilica—it’s programmable, so you can find the killer app more quickly. The other challenges are time to market, low power, and low cost.

Q: Where is system design enablement going? Does it expand outside the traditional market for EDA?

Tan: It’s not just about tools. IP is now 11% of our revenue. At the PCB level, we acquired a company called Sigrity, and through that we are able to drive system analysis for power, signal integrity, and thermal. And then we look at some of the verticals and provide modeling all the way from the system level to the component level. We make sure that we provide a solution to the end customer, rather than something piecemeal.

Q: What do you think DAC will look like in five years?

Tan: It’s getting smaller. We need to see more startups and innovative IP solutions. I saw a few here this year, and that’s good. We need to encourage small startups.

Q: Where do we get the people to pull this off? I don’t see too many people coming into EDA.

Tan: I talk to a lot of university students, and I tell them that this small industry is a gold mine. A lot of innovation is needed. We need them to come in [to EDA] rather than join Google or Facebook. Those are great companies, but there is a lot of fundamental physical innovation we need.

Richard Goering

Related Blog Posts

- Gary Smith at DAC 2015: How EDA Can Expand Into New Directions

- DAC 2015: Google Smart Contact Lens Project Stretches Limits of IC Design

- Q&A with Nimish Modi: Going Beyond Traditional EDA

The following is valid SystemVerilog:

module mmio
#(parameter PORTS=2,
parameter ADDR_WIDTH=30)
(input logic[ADDR_WIDTH-1:0] addr[PORTS],
output logic ben[PORTS], // Bus enable
output logic men[PORTS]); // Memory enable

always_comb begin
for(int i = 0; i < PORTS; i++) begin
ben[i] = addr[i] >= 'h20080004 && addr[i] < 'h200c0000;
men[i] = ~ben[i];
end
end

endmodule : mmio

And if you instantiate it:

mmio #(1, 30) MMIO(.addr('{scalar_addr}),
.ben('{ben}),
.men('{men}));

Genus returns an error: "Could not synthesize non-constant range values. [CDFG-231] [elaborate]" Is this just not possible in Genus or could it be caused by something else?

Cadence pulled a fast one at DAC 2018, almost like a bait and switch. We advertised a hands-on workshop to learn about Accellera Portable Stimulus Specification (PSS) v1.0. But we made participants compete head to head, for prizes, and their pride! T...(read more)

Everyone keeps talking about “the cloud” this and “the cloud” that these days—but you’re a semiconductor designer. Everyone keeps saying “the cloud” is revolutionizing all aspects of electronics design—but what does it mean for you? Cadence's own Tom Hackett discussed this in a presentation at the Cadence Theater during DAC 2019.

What people refer to as “the cloud” is commonly divided into three categories: Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and software as a Service (SaaS). With IaaS, you bring your own software—i.e. loading your owned or appropriately licensed tools onto cloud hardware that you rent by the minute. This service is available from providers like Google Cloud Platform, Amazon Web Service, and Microsoft Azure. In PaaS (also available from the major cloud providers), you create your own offering using capabilities and a software design environment provided by the cloud vendor that makes subsequent scaling and distribution really easy because the service was “born in the cloud”.  Lastly, there’s SaaS, where the cloud is used to access and manage functionality and data without requiring users to set up or manage any of the underlying infrastructure used to provide it.  SaaS companies like Workday and Salesforce deliver their value in this manner.  The Cadence Cloud portfolio makes use of both IaaS and SaaS, depending on the customers’ interest.  Cadence doesn’t have PaaS offerings because our customers don’t create their own EDA software from building blocks that Cadence provides.

All of these designations are great, but you’re a semiconductor designer. Presumably you use Workday or some similar software, or have in the past when you were an intern, but what about all of your tools? Those aren’t on the cloud.

Wait—actually, they are.

Using EDA tools in the cloud allows you to address complexity and data explosion issues you would have to simply struggle through before. Since you don’t have to worry about having the compute-power on-site, you can use way more power than you could before. You may be wary about this new generation of cloud-based tools, but don’t worry: the old rules of cloud computing no longer apply. Cloud capacity is far larger than it used to be, and it’s more secure. Updates to scheduling software means that resource competition isn’t as big of a deal anymore. Clouds today have nearly unlimited capacity—they’re so large that you don’t ever need to worry about running out of space.

The vast increase in raw compute available to designers through the cloud makes something like automotive functional safety verification, previously an extremely long verification task, doable in a reasonable time frame. With the cloud, it’s easy to scale the amount of compute you’re using to fit your task—whether it’s an automotive functional safety-related design or a small one.

Nowadays, the Cadence Cloud Portfolio brings you the best and brightest in cloud technology. No matter what your use case is, the Cadence Cloud Portfolio has a solution that works for you. You can even access the Palladium Cloud, allowing you to try out the benefits of an accelerator without having to buy one.

Cloud computing is the future of EDA. See the future here.

Hello, i am a student who is studying Allegro tool with SKILL.

I have a question about SKILL axlSegDelayAndZ0. The reference says this function "returns the delay and impedance of a cline segment."

I want to know how many components does this tool consider when calculating timing delay from the length. 

How steep is input signal's rise transition? Is rise transition shape isosceles trapezoid or differential increasing shape?

Also, if it is a multi fan-out, the rise transition time will be different net by net. How can this tool can calculate in this case?

I want to hear answers about these questions.

Thank you for reading this long boring questions, and i will be waiting for answers.

This is the 24th installment of The Rationalist, my column for the Times of India.

Back in the last decade, I was a cricket journalist for a few years. Then, around 12 years ago, I quit. I was jaded as hell. Every game seemed like déjà vu, nothing new, just another round on the treadmill. Although I would remember her fondly, I thought me and cricket were done.

And then I fell in love again. Cricket has changed in the last few years in glorious ways. There have been new ways of thinking about the game. There have been new ways of playing the game. Every season, new kinds of drama form, new nuances spring up into sight. This is true even of what had once seemed the dullest form of the game, one-day cricket. We are entering into a brave new world, and the team leading us there is England. No matter what happens in the World Cup final today – a single game involves a huge amount of luck – this England side are extraordinary. They are the bridge between eras, leading us into a Golden Age of Cricket.

I know that sounds hyperbolic, so let me stun you further by saying that I give the IPL credit for this. And now, having woken up you up with such a jolt on this lovely Sunday morning, let me explain.

Twenty20 cricket changed the game in two fundamental ways. Both ended up changing one-day cricket. The first was strategy.

When the first T20 games took place, teams applied an ODI template to innings-building: pinch-hit, build, slog. But this was not an optimal approach. In ODIs, teams have 11 players over 50 overs. In T20s, they have 11 players over 20 overs. The equation between resources and constraints is different. This means that the cost of a wicket goes down, and the cost of a dot ball goes up. Critically, it means that the value of aggression rises. A team need not follow the ODI template. In some instances, attacking for all 20 overs – or as I call it, ‘frontloading’ – may be optimal.

West Indies won the T20 World Cup in 2016 by doing just this, and England played similarly. And some sides began to realise was that they had been underestimating the value of aggression in one-day cricket as well.

The second fundamental way in which T20 cricket changed cricket was in terms of skills. The IPL and other leagues brought big money into the game. This changed incentives for budding cricketers. Relatively few people break into Test or ODI cricket, and play for their countries. A much wider pool can aspire to play T20 cricket – which also provides much more money. So it makes sense to spend the hundreds of hours you are in the nets honing T20 skills rather than Test match skills. Go to any nets practice, and you will find many more kids practising innovative aggressive strokes than playing the forward defensive.

As a result, batsmen today have a wider array of attacking strokes than earlier generations. Because every run counts more in T20 cricket, the standard of fielding has also shot up. And bowlers have also reacted to this by expanding their arsenal of tricks. Everyone has had to lift their game.

In one-day cricket, thus, two things have happened. One, there is better strategic understanding about the value of aggression. Two, batsmen are better equipped to act on the aggressive imperative. The game has continued to evolve.

Bowlers have reacted to this with greater aggression on their part, and this ongoing dialogue has been fascinating. The cricket writer Gideon Haigh once told me on my podcast that the 2015 World Cup featured a battle between T20 batting and Test match bowling.

This England team is the high watermark so far. Their aggression does not come from slogging. They bat with a combination of intent and skills that allows them to coast at 6-an-over, without needing to take too many risks. In normal conditions, thus, they can coast to 300 – any hitting they do beyond that is the bonus that takes them to 350 or 400. It’s a whole new level, illustrated by the fact that at one point a few days ago, they had seven consecutive scores of 300 to their name. Look at their scores over the last few years, in fact, and it is clear that this is the greatest batting side in the history of one-day cricket – by a margin.

There have been stumbles in this World Cup, but in the bigger picture, those are outliers. If England have a bad day in the final and New Zealand play their A-game, England might even lose today. But if Captain Morgan’s men play their A-game, they will coast to victory. New Zealand does not have those gears. No other team in the world does – for now.

But one day, they will all have to learn to play like this.

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

Greeting to all:

I am new in this tool, only 2 weeks. Trying to create a new Via with smaller size drill hole from exiting 13 mils size to 10 mils size. I got the message as imaged below. Any advise what to do?  Thanks in advance.

Key Findings:  Nearly 100% of SoCs are mixed-signal to some extent.  Every one of these could benefit from the use of a metrics-driven unified verification methodology for mixed-signal (MD-UVM-MS), but the modeling step is the biggest hurdle to overcome.  Without the magical models, the process breaks down for lack of performance, or holes in the chip verification.

In the last installment of The Low Road, we were at the mixed-signal verification party. While no one talked about it, we all saw it: The party was raging and everyone was having a great time, but they were all dancing around that big elephant right in the middle of the room. For mixed-signal verification, that elephant is named Modeling.

To get to a fully verified SoC, the analog portions of the design have to run orders of magnitude faster than the speediest SPICE engine available. That means an abstraction of the behavior must be created. It puts a lot of people off when you tell them they have to do something extra to get done with something sooner. Guess what, it couldn’t be more true. If you want to keep dancing around like the elephant isn’t there, then enjoy your day. If you want to see about clearing the pachyderm from the dance floor, you’ll want to read on a little more….

Figure 1: The elephant in the room: who’s going to create the model?

 Whose job is it?

Modeling analog/mixed-signal behavior for use in SoC verification seems like the ultimate hot potato.  The analog team that creates the IP blocks says it doesn't have the expertise in digital verification to create a high-performance model. The digital designers say they don’t understand anything but ones and zeroes. The verification team, usually digitally-centric by background, are stuck in the middle (and have historically said “I just use the collateral from the design teams to do my job; I don’t create it”).

If there is an SoC verification team, then ensuring that the entire chip is verified ultimately rests upon their shoulders, whether or not they get all of the models they need from the various design teams for the project. That means that if a chip does not work because of a modeling error, it ought to point back to the verification team. If not, is it just a “systemic error” not accounted for in the methodology? That seems like a bad answer.

That all makes the most valuable guy in the room the engineer, whose knowledge spans the three worlds of analog, digital, and verification. There are a growing number of “mixed-signal verification engineers” found on SoC verification teams. Having a specialist appears to be the best approach to getting the job done, and done right.

So, my vote is for the verification team to step up and incorporate the expertise required to do a complete job of SoC verification, analog included. (I know my popularity probably did not soar with the attendees of DVCON with that statement, but the job has to get done).

It’s a game of trade-offs

The difference in computations required for continuous time versus discrete time behavior is orders of magnitude (as seen in Figure 2 below). The essential detail versus runtime tradeoff is a key enabler of verification techniques like software-driven testbenches. Abstraction is a lossy process, so care must be taken to fully understand the loss and test those elements in the appropriate domain (continuous time, frequency, etc.).

Figure 2: Modeling is required for performance

AFE for instance

The traditional separation of baseband and analog front-end (AFE) chips has shifted for the past several years. Advances in process technology, analog-to-digital converters, and the desire for cost reduction have driven both a re-architecting and re-partitioning of the long-standing baseband/AFE solution. By moving more digital processing to the AFE, lower cost architectures can be created, as well as reducing those 130 or so PCB traces between the chips.

There is lots of good scholarly work from a few years back on this subject, such as Digital Compensation of Dynamic Acquisition Errors at the Front-End of ADCS and Digital Compensation for Analog Front-Ends: A New Approach to Wireless Transceiver Design.

Figure 3: AFE evolution from first reference (Parastoo)

The digital calibration and compensation can be achieved by the introduction of a programmable solution. This is in fact the most popular approach amongst the mobile crowd today. By using a microcontroller, the software algorithms become adaptable to process-related issues and modifications to protocol standards.

However, for the SoC verification team, their job just got a whole lot harder. To determine if the interplay of the digital control and the analog function is working correctly, the software algorithms must be simulated on the combination of the two. That is, here is a classic case of inseparable mixed-signal verification.

So, what needs to be in the model is the big question. And the answer is, a lot. For this example, the main sources of dynamic error at the front-end of ADCs are critical for the non-linear digital filtering that is highly frequency dependent. The correction scheme must be verified to show that the nonlinearities are cancelled across the entire bandwidth of the ADC. 

This all means lots of simulation. It means that the right level of detail must be retained to ensure the integrity of the verification process. This means that domain experience must be added to the list of expertise of that mixed-signal verification engineer.

Back to the pachyderm

There is a lot more to say on this subject, and lots will be said in future posts. The important starting point is the recognition that the potential flaw in the system needs to be examined. It needs to be examined by a specialist.  Maybe a second opinion from the application domain is needed too.

So, put that cute little elephant on your desk as a reminder that the beast can be tamed.

Steve Carlson

Related stories

- It’s Late, But the Party is Just Getting Started

visit News18 Urdu for latest news, breaking news, news headlines and updates from Kalhandi on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Thane on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Kishanganj on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Chandigarh on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Jhansi on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Burhanpur on politics, sports, entertainment, cricket, crime and more.

Rajasthanમાં BSFના વધુ 12 જવાન પોઝિટિવ, STC સેન્ટરમાં હતા ક્વોરોન્ટાઇન

visit News18 Urdu for latest news, breaking news, news headlines and updates from Khandwa on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Jehanabad on politics, sports, entertainment, cricket, crime and more.

visit News18 Gujarati for latest news, breaking news, news headlines and updates from Chansma on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Thanjavur on politics, sports, entertainment, cricket, crime and more.

visit News18 Gujarati for latest news, breaking news, news headlines and updates from Lakhani on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Jhanjhar on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Changalang on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Darbhanga on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Chandauli on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Pathanamthitta on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Chandrapur on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Dhanbad on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Shahjahanpur on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Hanumangarh on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Bhandara on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Hoshangabad on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Buldhana on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Chandel on politics, sports, entertainment, cricket, crime and more.

visit News18 Urdu for latest news, breaking news, news headlines and updates from Churachandpur on politics, sports, entertainment, cricket, crime and more.