NASA engineers fired the engines on the X-59 research aircraft in advance of planned test flights to determine if the aircraft can reduce sonic booms and make supersonic flight over land quieter.

In an astounding sonic experience, creative director Felipe Sánchez Luna takes you on a journey through the universe as told in sound. Take a deep breath, listen closely and discover the power of sound to provide you with a new emotional understanding of the world.

Read the in depth Review of Redmi SonicBass Wireless Earphones Audio Video. Know detailed info about Redmi SonicBass Wireless Earphones configuration, design and performance quality along with pros & cons, Digit rating, verdict based on user opinions/feedback.

Russia started mass supplying its military with Zicron missiles to attempt to boost its nuclear forces.

Russian warship armed with hypersonic missiles trains in English Channel, state media reports

The books, TV, games and more that New Scientist staff have enjoyed this week

Strange volcanoes called kimberlites bring diamonds up from Earth's depths. Scientists have always struggled to understand why they switched off millions of years ago – but perhaps they didn't

Purpose Dental professionals are exposed to hazardous noise levels on a daily basis in clinical practice. The purpose of this study was to compare the hearing status of dental hygienists who utilize ultrasonic scalers in the workplace compared to age-matched control participants (non-dental hygienists) who were not exposed to ultrasonic noise.Methods A convenience sample of nineteen dental hygienists (experimental) and nineteen non-dental hygienists (control) was recruited for this study. A matched pairs design was utilized; participants in each group were matched based on age and gender to eliminate confounding variables. The testing procedure consisted of an audiologist performing a series of auditory tests including otoacoustic emissions test, pure-tone audiometry, and tympanometry on the experimental and control groups.Results In the right ear, there were notable differences from 1000 Hz – 10,000 Hz and in the left ear from 6000 Hz – 10,000 Hz, with higher hearing thresholds in the experimental group of dental hygienists. While 56% of the univariate tests conducted on how many days were worked per week showed statistical significance, the regression line slope indicated those that worked more days had better hearing statuses. The variables for years in practice for dental hygienists, how many of those years were full-time employment, and how many years the dental hygienist had used an ultrasonic scaling device, also had many significant univariate tests for the experimental group only. These variables were more likely to serve as proxies representing true noise exposure. The paired t-test between the groups demonstrated statistically significant differences between the experimental and control group at 9000 Hz in both ears.Conclusion While results from this study demonstrated various qualitative differences in hearing status of the control group (non-dental hygienists) and experimental group (dental hygienists), age was found to be the most critical variable. Furthermore, this data demonstrated differences in hearing status based on various frequencies between dental hygienists and age-matched controls that should be further explored with a larger population.

Creating engaging videos isn’t only about the visuals. So much of the appeal of good video content is about the audio, but finding (or maybe even creating) the right audio effects can be a time-consuming process. At its annual MAX conference, Adobe is showing off Project Super Sonic, an experimental prototype demo that shows how […]

© 2024 TechCrunch. All rights reserved. For personal use only.

Panasonic has unveiled the LUMIX S9, a new full-frame mirrorless camera designed specifically for content creators who value portability and ease of use. Small But Mighty The LUMIX S9 boasts the distinction of being the smallest and lightest camera in the

Manchester : Manchester University Press, [2020]

The ViewSonic LX700-4K RGB laser projector comes with claimed 100% coverage of the BT.2020 color gamut and ability to project up to 300” screen size

The Japanese electronics firm has bagged city surveillance projects in Bhopal and Ludhiana. It is now eyeing projects under Smart Cities mission in Guwahati and Jabalpur.

A new method based on time-resolved X-ray diffraction is proposed in order to measure the elastic strain and stress during ultrasonic fatigue loading experiments. Pure Cu was chosen as an example material for the experiments using a 20 kHz ultrasonic fatigue machine mounted on the six-circle diffractometer available at the DiffAbs beamline on the SOLEIL synchrotron facility in France. A two-dimensional hybrid pixel X-ray detector (XPAD3.2) was triggered by the strain gage signal in a synchronous data acquisition scheme (pump–probe-like). The method enables studying loading cycles with a period of 50 µs, achieving a temporal resolution of 1 µs. This allows a precise reconstruction of the diffraction patterns during the loading cycles. From the diffraction patterns, the position of the peaks, their shifts and their respective broadening can be deduced. The diffraction peak shift allows the elastic lattice strain to be estimated with a resolution of ∼10−5. Stress is calculated by the self-consistent scale-transition model through which the elastic response of the material is estimated. The amplitudes of the cyclic stresses range from 40 to 120 MPa and vary linearly with respect to the displacement applied by the ultrasonic machine. Moreover, the experimental results highlight an increase of the diffraction peak broadening with the number of applied cycles.

'Sonic boom' as small earthquake shakes Cornwall  ITV News

Although microscopes and image-analysis software for electron cryomicroscopy (cryo-EM) have improved dramatically in recent years, specimen-preparation methods have lagged behind. Most strategies still rely on blotting microscope grids with paper to produce a thin film of solution suitable for vitrification. This approach loses more than 99.9% of the applied sample and requires several seconds, leading to problematic air–water interface interactions for macromolecules in the resulting thin film of solution and complicating time-resolved studies. Recently developed self-wicking EM grids allow the use of small volumes of sample, with nanowires on the grid bars removing excess solution to produce a thin film within tens of milliseconds from sample application to freezing. Here, a simple cryo-EM specimen-preparation device that uses components from an ultrasonic humidifier to transfer protein solution onto a self-wicking EM grid is presented. The device is controlled by a Raspberry Pi single-board computer and all components are either widely available or can be manufactured by online services, allowing the device to be constructed in laboratories that specialize in cryo-EM rather than instrument design. The simple open-source design permits the straightforward customization of the instrument for specialized experiments.

The new study suggests that echolocation calls also serve a social function--bats listen to the ultrasonic calls of other bats to identify roost mates, bats of the same species, members of the opposite sex and intruders to their territory.

The post Scientists find ultrasonic calls of bats also serve a social function appeared first on Smithsonian Insider.

A newly discovered mechanism in the throats of mice works like a supersonic jet engine.

Electronics giant announces it will compensate workers relocating to China for the poor quality of air they will have to breathe.

NASA's huge supersonic parachute isn't ready to land astronauts on Mars just yet.

The bizarre, unexplained sounds that harmed American diplomats working in Cuba may have come from the Indies short-tailed cricket.

Compact, Through-beam, Ultrasonic Sensor(E4E2)

Let the mysteries of Egypt lead you on the path of enlightenment.

Partnership helps revitalize and empower local community

When he was putting together the latest compilation CD for his label CorpoRAT Records, Kris Martin had intended to hand out promotional discs at Boise's Treefort Music Festival, where several artists from the Spokane label were scheduled to perform, and then officially release the album in April for Record Store Day.…

You don't have to wander around the internet long before bumping into a rave review of Fiona Apple's new record Fetch the Bolt Cutters: It has inspired breathless acclaim, has already been labeled a masterwork and is notably the first new album in nearly a decade that Pitchfork has assigned a perfect 10/10 rating.…

An apparatus and method for indicating locus of an ultrasonic probe configured to transmit and receive ultrasonic waves toward a part of a subject wherein a position or movement of the ultrasonic probe is detected, and a locus of the ultrasonic probe on an image of the part of the subject is indicated according to the detected position or movement.

In designing supersonic aircrafts, a method of designing a natural laminar flow wing is provided which reduces friction drag by delaying boundary layer transition under flight conditions of actual aircrafts. A target Cp distribution on wing upper surface, suited to natural laminarization in which boundary layer transition is delayed rearward in desired Reynolds number states, is defined by a functional type having as coefficients parameters depending on each spanwise station, a sensitivity analysis employing a transition analysis method is applied to the parameters, and a search is performed for the optimum combination of parameters to delay transition rearward.

There is provided an ultrasonic cancer treatment enhancer and cell killer that can significantly improve the effect of treating cancer by ultrasonic irradiation while ensuring a high level of safety. The ultrasonic cancer treatment enhancer and cell killer comprise metal semiconductor particles and can be activated upon ultrasonic irradiation to kill or destruct cancer cells.

A method and devices comprise a low frequency high energy ultrasound system having at least one sonotrode projecting into a reactor vessel through which the liquid passes via at least one inlet orifice and at least one outlet orifice. To avoid cavitation at the sonotrode, in a close region of the oscillation-transducing sonotrode surface a pressure/amplitude combination close to or above the pressure-amplitude characteristic line is generated at which considerably reduced or no cavitation occurs and in the adjacent region in the vessel at least in a region and at least at times a pressure/amplitude combination is maintained below the pressure-amplitude characteristic line at which cavitation is generated. A device has an inlet orifice arranged such that the liquid impacts directly onto the oscillation-transducing sonotrode surface, and is shaped that in the close region of the oscillation-transducing sonotrode surface a pressure close to or above the pressure-amplitude characteristic line prevails.

The present invention discloses a high intensity ultrasonic treatment method and apparatus that is used in conjunction with an existing commercial dough or batter mixer to enhance the rheological, aeration and textural properties of the dough or batter. This change in properties is a result of the phenomenon of acoustic cavitation induced in the dough or batter by treatment with high intensity ultrasonic waves. The present invention discloses a mixing bowl (20) of an existing mixer system that is preloaded with dough or batter, the bowl (20) is located at the center of an ultrasonic bath tank (101) filled with a working fluid. The effect of ultra-sonic waves with power levels above 1 kW can be observed over the entire or partial mixing period of the dough or batter. The ultra-sonic waves of the present invention are generated by a plurality of ultrasonic wave generators (104A, 104B) and piezoelectric transducers (1) mounted on a stainless steel tank (101). The electrical energy received in each transducer (1) will be converted into appropriate mechanical expansion and contractions in the piezoelectric ceramics of the transducer (1) thus leading to pressure waves being transmitted to the dough or batter to be mixed. The generation and transmission of high intensity ultrasonic waves to the dough or batter affects its rheological, aeration and textural properties.

A machining system that includes an ultrasonic machining assembly, wherein the ultrasonic machining assembly further includes a machining tool; a collet adapted to receive the machining tool; and an ultrasonic transducer, wherein the ultrasonic transducer is operative to transmit acoustical vibrations to the machining tool; and a machining apparatus, wherein the machining apparatus is adapted to receive and secure the ultrasonic machining assembly, and wherein the machining apparatus is operative to transmit torque to the machining tool by applying rotary motion to the ultrasonic machining assembly.

The present invention relates generally to an ultrasonic stimulating pet toy and, more specifically, to a mouse-like pet toy comprising a sound chip assembly that emits ultrasonic vocalizations that replicate those studied in mice. The instant abstract is neither intended to define the invention disclosed in this specification nor intended to limit the scope of the invention in any way.

A system for tire distillation including an upper chamber, a first conveyor configured to transport a tire through the upper chamber, a lower chamber located beneath the upper chamber, the lower chamber that includes an ultrasonic purge chamber configured to radiate the tire with ultrasonic radiation, a microwave radiation chamber configured to radiate the tire with microwave radiation, and a second conveyor configured to transport the tire from the ultrasonic purge chamber to the microwave radiation chamber. The system further includes a vacuum system configured to maintain an atmosphere in the ultrasonic purge chamber and the microwave radiation chamber under a vacuum wherein the tire is preheated during conveyance through the upper chamber from heat produced in the lower chamber.

A method for ultrasonically inspecting components with wavy or uneven surfaces. A multi-element array ultrasonic transducer is operated with a substantial fluid layer, such as water, between the array transducer and the component surface. This fluid layer may be maintained by immersing the component in liquid or by using a captive couplant column between the probe and the component surface. The component is scanned, measuring the two dimensional surface profile using either a mechanical stylus, laser, or ultrasonic technique. Once an accurate surface profile of the component's surface has been obtained, data processing parameters are calculated for processing the ultrasonic signals reflected from the interior of the component that eliminate beam distortion effects and reflector mis-location that would otherwise occur due to the uneven surfaces.

A system is provided for inspecting a workpiece that includes a workpiece defect and a workpiece surface. The system includes a laser pointer connected to an ultrasonic inspection system. The ultrasonic inspection system includes an ultrasonic transducer that directs sound waves to the workpiece defect, where the sound waves contact the workpiece surface at a workpiece surface location. The laser pointer directs a laser beam against the workpiece surface to visually annunciate the workpiece surface location.

An ultrasonic sensor includes: a substrate; an ultrasonic transducer disposed on the substrate, and configured and arranged to transmit ultrasonic waves that propagate as plane waves in a direction orthogonal to a surface of the substrate; an acoustic refracting part contacting the ultrasonic transducer, and configured and arranged to refract the ultrasonic waves transmitted from the ultrasonic transducer; an elastically deformable elastic portion contacting the acoustic refracting part; and an ultrasonic reflecting member disposed within the elastic portion, and configured and arranged to reflect the ultrasonic waves. The acoustic refracting part is configured and arranged to refract, toward the ultrasonic reflecting member, the ultrasonic waves transmitted from the ultrasonic transducer.

A method for ultrasonically inspecting components with wavy or uneven surfaces. A multi-element array ultrasonic transducer is operated with a substantial fluid layer, such as water, between the array transducer and the component surface. This fluid layer may be maintained by immersing the component in liquid or by using a captive couplant column between the probe and the component surface. The component is scanned, measuring the two dimensional surface profile using either a mechanical stylus, laser, or ultrasonic technique. Once an accurate surface profile of the component's surface has been obtained, data processing parameters are calculated for processing the ultrasonic signals reflected from the interior of the component that eliminate beam distortion effects and reflector mis-location that would otherwise occur due to the uneven surfaces.

An ultrasonic-rotary composite atomization mechanism comprises a housing and an ultrasonic unit passing through the housing and free to rotate with respect to the housing. A dynamic unit is installed in a position of the ultrasonic unit, which is corresponding to the housing, to drive the ultrasonic unit to rotate with respect to the housing. The ultrasonic unit includes a material supply channel, a vibration member disposed in the ultrasonic unit, and a vibration-rotation cup connected with the material supply channel. The material supply channel carries a liquid into the vibration-rotation cup. The dynamic unit and vibration member operate simultaneously to make the vibration-rotation cup rotate at high speed and vibrate ultrasonically. Thus is generated a synergistic effect: the ultrasonic vibration uses inertia force to break the cohesion and disperse the liquid, and the high-speed rotation generates centrifugal force to atomize the liquid.

An ultrasonic measurement system and a measurement method thereof are disclosed. The system includes a subsystem summarization processing device, and at least two measurement subsystems mounted on different regions to be measured, each measurement subsystem includes a primary measurement sensor and a secondary measurement sensor, the primary measurement sensor includes a first housing, and a first transduction element, a measurement processing element and a signal control element mounted within the first housing respectively, the signal control element is coupled to the first transduction element and the measurement processing element respectively, the first transduction element is mounted on a bottom end surface of the first housing, the secondary measurement sensor includes a second housing and a second transduction element mounted on a bottom end surface of the second housing, the second transduction element is coupled to the signal control element, and the measurement processing element of each of the measurement subsystems is coupled to the subsystem summarization processing device respectively. The measurement accuracy can be improved by implementing the present invention.