For subscriptions to liquid and overnight schemes, the regulator has revised the time to 12.30 pm, while the same for other schemes is 1 pm.

Lifting of the lockdown would release pent-up demand from incomplete repainting projects but we do not expect much new repainting work (especially in urban markets), nor a pick-up in fresh painting (construction activity).

Islamabad : Reduced human activities outside due to COVID-19 lockdown has not only contributed to the revival of nature through lowering pollution level and limiting human interference but also provided an opportunity to the migratory birds to fly freely without any threat of poaching.World...

The purchase price values Permata at 1.63 times its book value as of March 31, down from 1.77.

The post StanChart, Astra agree to reduced sale price for stake in Bank Permata appeared first on DealStreetAsia.

Explained: How coronavirus lockdown reduced Earth’s seismic noise levels  The Indian Express

Crystallographic textures, as they develop for example during cold forming, can have a significant influence on the mechanical properties of metals, such as plastic anisotropy. Textures are typically characterized by a non-uniform distribution of crystallographic orientations that can be measured by diffraction experiments like electron backscatter diffraction (EBSD). Such experimental data usually contain a large number of data points, which must be significantly reduced to be used for numerical modeling. However, the challenge in such data reduction is to preserve the important characteristics of the experimental data, while reducing the volume and preserving the computational efficiency of the numerical model. For example, in micromechanical modeling, representative volume elements (RVEs) of the real microstructure are generated and the mechanical properties of these RVEs are studied by the crystal plasticity finite element method. In this work, a new method is developed for extracting a reduced set of orientations from EBSD data containing a large number of orientations. This approach is based on the established integer approximation method and it minimizes its shortcomings. Furthermore, the L1 norm is applied as an error function; this is commonly used in texture analysis for quantitative assessment of the degree of approximation and can be used to control the convergence behavior. The method is tested on four experimental data sets to demonstrate its capabilities. This new method for the purposeful reduction of a set of orientations into equally weighted orientations is not only suitable for numerical simulation but also shows improvement in results in comparison with other available methods.

Hot spots of mercury pollution in aquatic sediments and soils can contaminate local food webs and threaten ecosystems, but cleaning them up can be expensive […]

The post Toxicity of mercury hot spots can be reduced with application of activated carbon, researchers discover appeared first on Smithsonian Insider.

Restoration of upland bog habitats by blocking drainage channels has caused concern among some sheep farmers that this will reduce the quality of grazing areas. However, UK researchers have shown that drainage does not encourage growth of plants favoured by sheep, nor do sheep use drained areas more. Therefore they conclude such restoration measures are unlikely to detrimentally affect sheep grazing.

A recent study has investigated how exposure to a variety of environmental pollutants, including heavy metals and chlorinated compounds, affects the height and body mass index (BMI) of local communities. It found that some pollutants could be causing reduced height and BMI, which can be explained in part by the pollutants??? disrupting effects on the hormonal system.

Most emissions of nitrous oxide (N2O) are linked to the use of nitrogen (N) fertiliser in agriculture, highlighting a need for agricultural management practices that reduce emissions while maintaining agronomic productivity. A new study has assessed the long-term impact of conventional tillage (CT — where soil is prepared for agriculture via mechanical agitation) and no-tillage (NT) systems on soil N2O emissions and crop productivity in rain-fed Mediterranean conditions. The findings show that, over a period of 18 years, mean yield-scaled (i.e. per unit grain yield) soil N2O emissions (YSNE) were 2.8 to 3.3 times lower under NT than CT. The researchers therefore recommend NT as a suitable strategy by which to balance agricultural productivity with lower soil N2O emissions in rain-fed Mediterranean agroecosystems.

A new study has shown that contamination of groundwater by hazardous substances contained in waste liquid from landfill sites – known as leachate - could be significantly reduced by choosing specific types of material to line the landfill reactors.

Every year many marine animals including seabirds, sea turtles and sharks are unintentionally caught as bycatch in commercial fishing gear. Recent research has demonstrated that illuminating fishing nets with ultraviolet (UV) lights can reduce sea turtle bycatch without significantly affecting the number of fish caught or their market value.

Residents living near a busy railway line in Strasbourg were found by researchers to have reduced cognitive function compared to residents in quieter areas, which may be the result of long-term exposure to night-time noise. Psychological tests suggested that they had not adapted to the noise over the years, and they did not become less affected with time.

Whatever form it takes, urban growth leads to reduced groundwater availability, according to a new study. The paper highlights the fact that urbanisation is not always sustainable and recommends that planners consider no-growth scenarios for economic development.

A study on how diet can affect water usage in the EU has concluded that a vegetarian diet is the most sustainable, but any reduction in meat consumption would be a move towards more sustainable water use.

Landfill leachate is the liquid that seeps through or out of waste deposits in landfill sites. EU regulations, such as the Landfill Directive1, have significantly reduced the volume of leachate produced, a study on leachate management in Ireland has found. Leachate, mainly from younger landfills in Ireland is, however, stronger since implementation of the legislation, and the researchers say the future treatment of leachate under stricter environmental protection regulations will continue to be a long-term concern for landfill operators and regulators.

The biodiversity and abundance of arbuscular mycorrhizal fungi — important soil organisms that can help plants to capture nutrients — is greater in organically managed soils with reduced tilling compared to conventional methods, a new Swiss study suggests. This illustrates the impacts that land management practices such as ploughing can have on soil biodiversity and the ecosystem services it provides.

A model for chemical use that involves collaboration between suppliers and end-users could benefit both parties as well as the environment, according to recent research. In a Serbian case study, a bottled water manufacturer reduced its costs, water and chemicals consumption, and production of hazardous wastewater when it collaborated with its supplier of lubricant for factory conveyor belts using the ‘Chemical Leasing’ model.

Pesticides used on agricultural land can leach into nearby surface water; this is called run-off and can harm aquatic ecosystems. This study evaluated the potential of ditches to reduce run-off, using Italy’s Po Valley as a case study. Grassy ditches were able to significantly reduce the concentration of herbicides, even during extreme flooding. The researchers therefore suggest that the promotion of vegetated ditches via agri-environment schemes would be beneficial for pesticide mitigation.

A recent study suggests that mercury deposited from the atmosphere is the main source of mercury pollution in the open oceans. Curbing mercury emissions will slowly lead to a decrease in contaminated fish, as eaten by humans, within a few years to decades after the cuts have been made, the researchers suggest.

Ammonia released by nitrogen fertilisers in Spanish agriculture could be reduced by up to 82% with only a very minimal impact on crop yield, finds new research. This could be achieved by combining optimised management of manure with the use of non-urea synthetic fertilisers.

Deposition of heavy metals and nitrogen is falling across Europe, a new study suggests. The researchers used the levels of these pollutants in mosses as indicators of how deposition has changed from 1990 to 2010. These reductions are likely to be the result of effective air pollution policies, they say.

CULPEPER — The Virginia Department of Transportation has begun rehabilitating the Route 707 (Blair Park Road) bridge over Lickinghole Creek in...

FREDERICKSBURG , Va. – An additional evening of work is required this week for an ongoing pin replacement on the Robert O. Norris Bridge, and...

FREDERICKSBURG , Va. – An additional evening of work is required this week for an ongoing pin replacement on the Robert O. Norris Bridge, and...

NOV. 12, 2018 UPDATE: All lanes of Route 3 over the Rappahannock River between Lancaster and Middlesex counties will remain open this evening, Nov....

LEESBURG – The two-lane Cochran Mill Road (Route 653) bridge over Tuscarora Creek has been reduced to one lane of alternating traffic until further...

If you have less than perfect mobility, the chances are lowering yourself into a bath-tub is out of the question. But if you have a shower that's fixed over the bath, the chances are that having a shower can be a less than easy experience too. Bathrooms can be very hazardous environments; slippery floors, bath sides or shower trays to negotiate as well as the difficulty in standing for long periods in the shower.

Grand Canyon National Park's North Rim will transition to seasonally reduced services beginning at noon on Oct. 16, 2019. Grand Canyon National Park would like to remind the public to plan accordingly if they intend to visit the North Rim after Oct. 15. https://www.nps.gov/grca/learn/news/gcnp-n-rim-transitions-to-reduced-services-2019-10-02.htm

We present a novel numerical scheme to approximate the solution map $smapsto u(s) := mathcal{L}^{-s}f$ to partial differential equations involving fractional elliptic operators. Reinterpreting $mathcal{L}^{-s}$ as interpolation operator allows us to derive an integral representation of $u(s)$ which includes solutions to parametrized reaction-diffusion problems. We propose a reduced basis strategy on top of a finite element method to approximate its integrand. Unlike prior works, we deduce the choice of snapshots for the reduced basis procedure analytically. Avoiding further discretization, the integral is interpreted in a spectral setting to evaluate the surrogate directly. Its computation boils down to a matrix approximation $L$ of the operator whose inverse is projected to a low-dimensional space, where explicit diagonalization is feasible. The universal character of the underlying $s$-independent reduced space allows the approximation of $(u(s))_{sin(0,1)}$ in its entirety. We prove exponential convergence rates and confirm the analysis with a variety of numerical examples.

Further improvements are proposed in the second part of this investigation to avoid inversion of $L$. Instead, we directly project the matrix to the reduced space, where its negative fractional power is evaluated. A numerical comparison with the predecessor highlights its competitive performance.

We empirically evaluate an undervolting technique, i.e., underscaling the circuit supply voltage below the nominal level, to improve the power-efficiency of Convolutional Neural Network (CNN) accelerators mapped to Field Programmable Gate Arrays (FPGAs). Undervolting below a safe voltage level can lead to timing faults due to excessive circuit latency increase. We evaluate the reliability-power trade-off for such accelerators. Specifically, we experimentally study the reduced-voltage operation of multiple components of real FPGAs, characterize the corresponding reliability behavior of CNN accelerators, propose techniques to minimize the drawbacks of reduced-voltage operation, and combine undervolting with architectural CNN optimization techniques, i.e., quantization and pruning. We investigate the effect of environmental temperature on the reliability-power trade-off of such accelerators. We perform experiments on three identical samples of modern Xilinx ZCU102 FPGA platforms with five state-of-the-art image classification CNN benchmarks. This approach allows us to study the effects of our undervolting technique for both software and hardware variability. We achieve more than 3X power-efficiency (GOPs/W) gain via undervolting. 2.6X of this gain is the result of eliminating the voltage guardband region, i.e., the safe voltage region below the nominal level that is set by FPGA vendor to ensure correct functionality in worst-case environmental and circuit conditions. 43% of the power-efficiency gain is due to further undervolting below the guardband, which comes at the cost of accuracy loss in the CNN accelerator. We evaluate an effective frequency underscaling technique that prevents this accuracy loss, and find that it reduces the power-efficiency gain from 43% to 25%.

Disclosed is a process for preparing an aryloxyalkylene amine compound via an aminoethylation reaction comprising: a) reacting an aromatic hydroxyl compound in the presence of a basic catalyst with a 2-oxazolidinone compound of the formula II to form an intermediate reaction product; wherein R3 is selected from the group consisting of hydrogen or lower alkyl having 1 to 6 carbon atoms, R4 is selected from the group consisting of hydrogen, straight or branched chain alkyl having from one to six carbon atoms, phenyl, alkaryl, or arylalkyl; and b) reacting the intermediate product of step a) with a polyalkylene polyamine.

Method of extracting syngas between the zone in a furnace where oxygen-starved combustion of biomass occurs and the zone in the furnace where secondary air is added to complete combustion, conditioning and cleaning the extracted syngas, and delivering it in a metered amount to the oxidizer or upstream of the oxidizer to reduce or eliminate the need for additional fossil fuels once the oxidizer has achieved its operating temperature. The gasifier or furnace burns solid waste and produces a syngas containing relatively high levels of CO, which is extracted from the furnace, conditioned, and introduced into an RTO as a fuel source. In certain embodiments, no extraction of syngas from the furnace takes place; the furnace conditions are manipulated so that normally undesirable levels of CO and other VOC's remain in the process stream. The heat from the furnace is used as intended (e.g., to heat a dryer), the stream is conditioned, and ultimately proceeds to a downstream RTO. Since the gas stream remains rich in CO and VOC's, its fuel value in the RTO is substantially higher than otherwise would be the case.

A sine wave generator for a Direct Digital Synthesizer (DDS) converts a digital phase input into a digital sine wave output. Sine values and slopes are stored in read-only memory (ROM) for coarse upper phase bits in a first quadrant. A quadrant folder and phase splitter reflects and inverts values from the first quadrant to generate amplitudes for all four quadrants. Each sine value and slope is stored for a range of lower phase bits. A Delta bit separates upper and lower phase bits. Delta conditionally inverts the lower phase bits, the sine value, and the final polarity. A reduced AND logic array multiplies the slope by the conditionally inverted lower phase bits. A reconstructed ADD logic array then adds the conditionally inverted sine value. The conditionally inverted polarity is added to generate the final sine value. Sine generation logic is streamlined with conditional inversion based on the Delta bit.

The present invention is directed to processes for the recovery of ethanol from a crude ethanol product obtained from the hydrogenation of acetic acid using a low energy process. The crude ethanol product is separated in one or more columns. At least one of the columns is operated at a controlled pressure to enhance separation of ethanol and organics. In one embodiment, there are at least two columns that operate at controlled pressures.

A leakage power control vector is loaded into existing test scan chain elements for application to circuit elements of a circuit in which the leakage currents are to be controlled. The vector is designed to configure the circuit elements into states in which leakage currents are reduced. A multiplexer selects the power control vector for loading into the scan chain elements, and a clock generator clocks the configuration vector into the scan chain elements. A sleep mode detector may be provided to configure the multiplexer to select the power control vector and to operate the clock generator to clock the power control vector into the scan chain elements when a sleep mode of the circuit is detected.

The present invention relates to methods for safe and efficient use of hydrogen and oxygen in ozonolysis operations. The invention also relates to an ozonolysis process involving elements of both reductive and oxidative ozonolysis which are integrated in a continuous process. In one embodiment, the ozonolysis process of the present invention uses hydrogen and/or oxygen generated from water and electricity, which may be recycled to generate water and/or electricity.

An object of the present invention is to provide a substance characterized by ability to reduce oxidized coenzyme Q10 and ability to stabilize reduced coenzyme Q10, which contains nutrients, has a favorable taste, and is excellent in general versatility, and a method for using the same. The present invention relates to a method for producing reduced coenzyme Q10 comprising reducing oxidized coenzyme Q10 with a particular amino acid. The present invention also relates to a method for stabilizing reduced coenzyme Q10 in the presence of a particular amino acid and a composition stabilized by the method.

Described are embodiments of an invention for a method and a tool to produce a textured surface on the retention tab of a storage cell. The tool has a form that fits within the storage cell. The form has a hard material with a hard surface with contacts a surface of the retention tab within the storage cell. The movement of the hard surface across the surface of the retention tab produces a textured surface on the retention tab. The textured interface between a notch of a data storage cartridge and a retention tab of a storage cell provides a consistent and low friction force that retains the data storage cartridge within the cell but allows the accessor to easily remove the data storage cartridge when needed.

Techniques are provided for increasing spectral efficiency over data channels in a storage or communication system. In some embodiments, data may be encoded and transmitted over multiple channels. The transmitted data from the multiple channels may be considered together as a channel bundle, thereby increasing the edge transitions of the group of signals to improve clock recovery and reduce coding constraints. In some embodiments, the channel bit size is reduced to maximize data rates based on the reduced coding constraints. Furthermore, the channel bundle has only one channel with timing markers, so that a receiver may receive information from the channel bundle and recover clocking based on the timing markers in the one channel.

A system according to one embodiment includes at least two write transducers for writing to a magnetic medium; and a low reluctance path from a first pole of a first of the write transducers to a second pole of a second of the write transducers. In another embodiment, either 1) the first pole of the first write transducer and the second pole of the second write transducer are positioned close enough to each other that a low reluctance path is present from the first pole of the first write transducer to the second pole of the second write transducer, or 2) a magnetic strap extends between the first pole of the first write transducer and the second pole of the second write transducer thereby creating a low reluctance path therebetween.

A machined ceramic article having an initial surface defect density and an initial surface roughness is provided. The machined ceramic article is heated to a temperature range between about 1000° C. and about 1800° C. at a ramping rate of about 0.1° C. per minute to about 20° C. per minute. The machined ceramic article is heat-treated in air atmosphere. The machined ceramic article is heat treated at one or more temperatures within the temperature range for a duration of up to about 24 hours. The machined ceramic article is then cooled at the ramping rate, wherein after the heat treatment the machined ceramic article has a reduced surface defect density and a reduced surface roughness.

The subject invention pertains to matrix metalloproteinase (MMP) inhibitors that exhibit an IC50 of below 10−4M against MMP and have substantially no activity against non-MMP metalloproteinase-related events. The MMP inhibitors of the invention have reduced side-effects, especially with respect to joint pain.