The uploaded JSON file which was created via offline utility has invalid data format.. IS THE ERROR I GET EVERYTIME ON UPLOADING EVEN WHEN IM USING MSOFFICE2010 AND HAVE VALIDATED THE DATA IN XL

AFL great Dean Laidley provided several public insights into his despair in the lead-up to his shocking arrest. 

A horrific video of a Royal Enfield falling from a trailer has surfaced on the web. Watch what exactly happened!

This post explains a hidden gem in the XMLHttpRequest standard that simplifies fetching and parsing JSON data through Ajax.

A new method based on time-resolved X-ray diffraction is proposed in order to measure the elastic strain and stress during ultrasonic fatigue loading experiments. Pure Cu was chosen as an example material for the experiments using a 20 kHz ultrasonic fatigue machine mounted on the six-circle diffractometer available at the DiffAbs beamline on the SOLEIL synchrotron facility in France. A two-dimensional hybrid pixel X-ray detector (XPAD3.2) was triggered by the strain gage signal in a synchronous data acquisition scheme (pump–probe-like). The method enables studying loading cycles with a period of 50 µs, achieving a temporal resolution of 1 µs. This allows a precise reconstruction of the diffraction patterns during the loading cycles. From the diffraction patterns, the position of the peaks, their shifts and their respective broadening can be deduced. The diffraction peak shift allows the elastic lattice strain to be estimated with a resolution of ∼10−5. Stress is calculated by the self-consistent scale-transition model through which the elastic response of the material is estimated. The amplitudes of the cyclic stresses range from 40 to 120 MPa and vary linearly with respect to the displacement applied by the ultrasonic machine. Moreover, the experimental results highlight an increase of the diffraction peak broadening with the number of applied cycles.

In certain scenarios, a Subsystem Reference block changes its position. It can happen during: 

1. Loading of top model which contains the Subsystem Reference block 
2. Synchronization of Subsystem Reference block's contents
3. Converting a subsystem to Subsystem Reference block 

Today I decided to revisit a topic I covered a few years ago: loading discrete signals in a simulation.... read more >>

A CSS only 'loading' animation with no extra markup for all modern browsers.

A system for protecting an electronic device against malware includes a memory, an operating system configured to execute on the electronic device, and a below-operating-system security agent. The below-operating-system security agent is configured to trap an attempted access of a resource of the electronic device, access one or more security rules to determine whether the attempted access is indicative of malware, and operate at a level below all of the operating systems of the electronic device accessing the memory. The attempted access includes attempting to write instructions to the memory and attempting to execute the instructions.

A binary library overload instruction is received at an embedded computing device that executes a write-protected firmware build. The binary library overload instruction specifies a write-protected binary library of the write-protected firmware build to be overloaded by execution of an alternative binary library instead of the write-protected binary library of the write-protected firmware build. The alternative binary library is configured within a random access memory (RAM) storage area to execute instead of the write-protected binary library as specified in the received binary library overload instruction. The write-protected firmware build is executed using the alternative binary library instead of the write-protected binary library specified in the binary library overload instruction.

A device and method for accurately characterizing tissue impedance employs multiple electrodes at a plurality of separation distances to cancel the effects of front end loading leakage currents and electrode polarization to improve the accuracy of sensitive impedance measurements used to identify cancerous tissues. These measurements may be automated over a range of frequencies.

A rolling machine comprises parallel guides delimiting a workpiece conveying channel extending from a plurality of per se known rolling tools to a machined workpiece unloading arrangement, wherein, upstream of the workpiece unloading arrangement, one of the channel delimiting guides is operatively coupled to a structural element swingably supported by a pivot pin, the structural element being integral with the piston rod of a cylinder-piston unit slidably driving the structural element together with the channel delimiting guide, thereby providing a side unloading opening for the workpiece.

A system for loading/unloading sheets is disclosed, some of which also being of metal, and handling method thereof, serving a laser cutting center. The system includes a pair of rails (1, 2), supported at a preset height above a feeding tray (T) of the cutting center, whereon at least one Cartesian robotized hand is movably mounted, capable of moving along horizontal axes X and Y as well as along a vertical axis Z, mutually orthogonal, and including at least two bridge cranes (3, 4) sliding along the rails (1, 2) each of which supports at least one pair of robotized hands (5-8), and the robotized hands (5-8) have an electromagnetic pick-up head which may be coupled with a suction-cup device (103). Feeding tray (T) consists of bars whereon small tesserae (204) of ceramic material are fitted.

A cartridge drive apparatus includes a holder, a lock plate, and a drive unit. The holder is configured to hold a cartridge inserted therein. The lock plate is attached with respect to the holder to be movable in one of an insertion direction and a discharge direction of the cartridge and includes a locking mechanism configured to lock the cartridge. The drive unit is configured to drive the holder and the lock plate in one of the insertion direction and the discharge direction of the cartridge.

The present invention relates to a loading station for a storage frame. In the loading station, the storage frame serves for temporarily holding and transporting rod-like elements, in particular smoking rods, on which sausage-shaped products, like sausages, are stored, and comprises two side parts, wherein each side part has two supports being substantially parallel to each other and wherein the side parts are connected with each other by at least one cross beam, and horizontally arranged trays for accommodating rod-like elements. The loading station comprises at least one position defining device for defining a predetermined position of the storage frame. Moreover, at least one locking device is provided for releasably locking of the storage frame in its predetermined position.

The present invention discloses method and system for performing security monitoring on file downloading, and a non-transitory computer-readable medium that stores instructions for performing security monitoring on file downloading. The method includes upon detecting a file downloading operation, performing security detection on a downloaded file to determine whether the downloaded file is secure; if the downloaded file is secure, determining whether a downloading tool adopted when the file is downloaded is instant messenger (IM) software; and if the adopted downloading tool is IM software, modifying a filename extension of the downloaded file to ensure that the downloaded file is capable of being directly opened or run.

A loading container (10) for a washing machine (60) comprises a containing body (12) to support and position objects to be washed inside the washing machine (60) or washing devices (20, 22) containing the objects to be washed. The container (10) also comprises a base body (14), located below the containing body (12), and a rotation unit (45) to connect rotatably the base body (14) and the containing body (12) so as to allow a selective reciprocal angular positioning of the containing body (12) and the base body (14).

A combine harvester grain bulk tank and grain unloading system includes opposed bulk tank augers and an unloading auger formed in a grain bulk tank of a combine harvester. The bulk tank augers are for receiving and conveying grain through the bulk tank to the unloading auger, and the unloading auger is for receiving grain from the bulk tank augers and conveying grain to a grain unloading spout for grain unloading. A primary drive gear is coupled to the unloading auger and to an input, a secondary drive gear is drivingly coupled to the bulk tank augers, and a clutch is coupled between the primary drive gear and the secondary drive gear, which is movable between an engaged position for transferring power from the input to the unloading auger and to the bulk tank augers, and a disengaged position for isolating the bulk tank augers from the primary drive gear.

A cartridge assembly is disclosed. The cartridge assembly includes a channel and a removable assembly in releasable engagement with the channel. The removable assembly includes a cartridge body and a support plate. The cartridge body includes an engagement structure disposed adjacent a proximal end thereof. The support plate is configured to mechanically engage the cartridge body and includes an engagement structure disposed adjacent a proximal end thereof. The engagement structure of the cartridge body is configured for longitudinal alignment with the engagement structure of the support plate. The engagement structures of the cartridge body and the engagement structure of the support plate are configured to mechanically engage the engagement structure of the channel when the removable assembly is engaged with the channel.

A novel configurable integrated circuit (IC) that has several configurable circuits for configurably performing different operations is provided. During the operation of the IC, each particular configurable circuit performs a particular operation that is specified by a particular configuration data set for the particular configurable circuit. While the IC operates and a first set of configurable circuits performs a first set of operations, configuration data is loaded from the outside of the IC for configuring a second set of configurable circuits. The configurable IC includes a configuration network for rapid loading configuration data in the IC from outside of the IC. The configuration network is a pipelined network.

The present invention relates to a method for downloading a binary configuration file in a programmable circuit implemented in a device. The device comprises at least one central processing unit, a plurality of connectors, and a programmable circuit enabling all or a part of the signals received by said connectors to be processed and transmitted to at least one other circuit of the device. The device analyzes the signals present on the connectors in order to define what other devices are connected and whether the connections are operational. Then, a configuration file is selected from among a set of configuration files according to the operational connections and is downloaded from a memory of the device into the programmable circuit. The invention also relates to a device having a component programmed according to the method previously described.

A translocation-simulating loading apparatus for the gear grinding machine with the shaped grinding wheel is provided. The apparatus includes a load-receiving test piece disposed on the gear grinding machine with the shaped grinding wheel and a load-exerting component for use in loading simulation. The gear grinding machine enables linear movements along the X, Y, and Z axes, a rotary movement around the Y axis, a rotary movement C around the Z axis, and a rotary movement A around the X axis. An angle α is formed between the axis L of a ball seat of the load-exerting component and the X axis direction of a Y axis component and an angle formed between the normal line of a load receiving face a and the X direction of the coordinate system of the machine tool is α. A detection method for static stiffness distribution is provided.

A printing device is provided with a print die storage rack, a pickup head, a print head, and a printing surface. The print die storage rack is adapted to hold a multitude of print dies. The pickup head is provided to move one or more print dies to and from the storage rack and the print head. The print head is adapted to hold one or more print dies and move them between the pickup head and the printing surface. The printing surface is provided to hold and secure print media. The device is capable of any form of printing, embossing, debossing, foil stamping and the like. A method of printing is also provided.

A cloud computing system for object location, object identification, object picking, object picking by line, object loading onto one or more transport devices, or object delivery that can include using a cloud based server comprising a cloud based processor in communication with a cloud based data storage. The cloud based server can be in communication with at least one mobile processor in communication with a mobile data storage and a display. The method can also include sending instructions to an operator from the cloud based computer to a mobile processor associated with an operator to instruct the operator to perform a logistics operation. The logistic operation can include one or more of object location, object identification, object picking, object picking by line, object loading onto one or more transport devices, and object delivery.

In the present disclosure, there is disclosed a communication device including a pre-loading module configured to retrieve a first and a second set of flyer image tiles from a flyer image tile set stored in memory, the first set of flyer image tiles being associated with the most zoomed-out state and the second set of flyer image tiles being associated with a zoom level of a current viewport. The pre-loading module is further configured to associate the first set of flyer image tiles with an underlay viewport. The communication device further includes a display configured to display the first set of flyer image tiles in the underlay viewport that are visible in the current viewport and overlay the second set of flyer image tiles visible in the current viewport onto the first set of flyer image tiles.

A tuft carrier loading apparatus (10) for loading individual tufts (17) into tuft retention sites (9a) spaced along an elongate tuft carrier (9). The apparatus (10) includes a guide for guiding longitudinal movement of the tuft carrier along a path of travel and a plurality of individually and selectively operable tuft feeders (50) spaced along the path of travel, each tuft feeder (50) being operable when selected to feed an individual tuft to a tuft retention site (9a) of the tuft carrier (9). A driver (70) is drivingly connected to the tuft carrier (9) for moving the tuft carrier (9) along the path of travel, the driver (70) being operable to intermittently move the tuft carrier (9) through a series of successive positions whereat predefined tuft retention sites (9a) are moved temporarily into registry with each tuft feeder (50). A controller (60) is provided for controlling selection of the tuft feeders (50), the controller (60) being operable to actuate selected tuft feeders (50) to feed tufts to those tuft retention sites (9a) in registry therewith whilst the carrier (9) is located at each successive position. A detector is associated with each tuft retention site (9a) to detect the presence of a tuft. The driver (70), on detection of an absent tuft in a tuft retention site (9a) following actuation of one or more selected tuft feeders (50) resulting in failure to feed a tuft to the absent tuft retention site (9a), is operable to move the tuft carrier (9) into a position whereat the absent tuft retention site (9a) is moved temporarily back into registry with the or one selected tuft feeder (50) and the controller (60) re-actuates the selected tuft feeder (50) to feed a tuft to the absent tuft retention site (9a).

An assembly for collapsing a self-expanding prosthetic heart valve includes a compression member, a support member and a constricting member. The compression member has a tapered wall between its first open end and its second open end, the tapered wall defining an open space adapted to receive the valve. The support member has a base and a recess adapted to receive an end of the valve. The support member and the compression member are movable toward one another to compress the valve and push it through a relatively small aperture in the second open end of the compression member. The second end of the constricting member is sized to receive the compressed valve from the second open end of the compression member for loading into a delivery device.

A wire loading magazine for a twist attachment device includes a magazine assembly adapted to carry a supply of attachment wire segments and a wire loading assembly carried by the magazine assembly and adapted to individually and sequentially load the attachment wire segments from the magazine assembly into the twist attachment device.

A cable-driven liner loading system for loading of an invertible liner onto a trailer bed and unloading the invertible liner from the trailer bed. A movable trolley is supported between a pair of tracks defined by C-shaped members. The movable trolley is actuated by a cable system that is driven by a winch and a set of pulleys, permitting the movable trolley to move along an axis of the trailer bed to facilitate loading of the invertible liner in a serpentine-like manner.

Methods, apparatus, systems, and kits for loading paintballs into a feed tube of a paintball gun are disclosed. A loader includes a chamber for holding paintballs, a feed mechanism having a rotational feeder within the chamber that feeds paintballs from the chamber along a feed channel when rotating to fill the feed tube, and a drive mechanism that drives the rotational feeder of the feed mechanism, ceases to drive the rotational feeder responsive to stoppage of the rotational feeder, and periodically attempts to rotate the stopped rotational feeder. Paintballs are loaded from a loader into a feed tube of a paintball gun by driving a rotational feeder within the loader, the rotational feeder configured within the loader to feed paintballs into the feed tube when rotating, ceasing to drive the rotational feeder responsive to stoppage of the rotational feeder, and periodically attempting to rotate the stopped rotational feeder.

A magazine for an air gun is provided with first and second shells; an internal passage; a rotatable shaft including a lengthwise groove on a surface, and a transverse slot on the surface communicating with the groove; a pulley rotatably put on the shaft and having both ends rotatably secured to the first and second shells respectively; a ratchet mechanism mounted on the pulley; a pin inserted into the pulley to dispose in one end of the groove; a line having one end wound on the pulley, the line extending through the passage to have an other end engaged with a projectile support in the passage; a spring put on the line and biased between the pulley and the projectile support; and a spring biased knob disposed on an outer surface of the first shell and secured to the shaft.

Monorail vehicle that travels on a non-featured rail with substantial profile variation and controls roll attitude, lateral location, and loading through judicious placement of the vehicle's center of gravity without using springs or suspensions. The vehicle has a bogie for engaging the non-featured rail so the center of gravity has a lateral offset r1 from the rail centerline to produce a roll moment Nr determined by vehicle's mass and value of r1. The center of gravity also has a vertical offset r2. The bogie uses first and second assemblies for engaging the rail to produce a pair of surface normal reaction forces to thus control roll attitude and loading by the placement of the center of gravity, thereby enabling accurate alignment of the monorail vehicle.

A ride vehicle loading interface system to allow guests in wheelchairs to access a ride vehicle and enjoy a ride attraction. The loading interface system includes a plurality of associated ride vehicles moving on a track. At least one ride vehicle including a tray extendable from and retractable into the ride vehicle through an opening, the tray for receiving a wheelchair and for allowing the wheelchair to be positioned in the ride vehicle. The ride vehicle loading interface system including a loading platform moving at about the same rate as the ride vehicle during loading and unloading.

An apparatus for feeding a plurality of stacked currency bills into a currency handling device. The apparatus may comprise an input receptacle being configured to receive a plurality of stacked currency bills, the receptacle having a first side and a second opposing side, a front end, and an opposing back end. The apparatus further may comprise a first paddle rail disposed adjacent the first side and a first paddle assembly slidably coupled to the first paddle rail, the first paddle assembly having a portion configured to contact a stack of a plurality of bills residing in the input receptacle. The apparatus further may comprise a first resilient member coupled to the first paddle assembly, the first resilient member being configured to bias the first paddle assembly towards the front end of the receptacle, the first resilient member being configured to cause the first paddle assembly to move in a direction toward the front end of the input receptacle at a first average rate of speed when unrestrained and undamped. The apparatus further may comprise a first damping mechanism configured to slow the unrestrained, average rate of speed the first paddle assembly from the first average rate of speed to a second average rate of speed which is less the first average rate of speed.

The loading device according to the invention comprises a magazine for receiving at least one printing plate and transferring it from the magazine to the plate cylinder. It also comprises at least one guide rail to guide a printing plate during transfer thereof by cooperation with a notch of a front edge of the printing plate, the notch sliding along the guide rail during the transfer.

A loading machine for feeding a receiver includes, but is not limited to, a drum cam that is configured to rotate. The drum cam includes, but is not limited to, a first cam path, and a second cam path. A rammer subassembly is positioned proximate the drum cam. The rammer subassembly includes, but is not limited to, a first member that is configured to engage the first cam path and to move longitudinally with respect to the drum cam upon a rotation of the drum cam, and a second member that is configured to telescopically engage the first member and further configured to engage the second cam path and telescopically move with respect to the first member upon the rotation of the drum cam.

A hand operated press for reloading metal rifle cartridges including indicating means for providing for an operator of the press discrete indications of the different forces that can be manually applied through the drive mechanism during use of the press to crimp the second end of a cartridge against a bullet in the cartridge to allow the operator to use one of those indications to manually apply the same force to form essentially the same degree of crimp of the second ends of identical cartridges against identical bullets in the cartridges.

In one aspect, the invention relates to a method of loading exosomes with oligonucleotide cargo, by incubating an oligonucleotide comprising one or more hydrophobic modifications with a population of exosomes for a period of time sufficient to allow loading of the exosomes with the oligonucleotide. Exosomes loaded with hydrophobic ally modified oligonucleotide cargo, and uses thereof, are also provided.

A weight loading system for fitness equipments includes a fitness equipment support, a rally rope, a motor, a motor driving and a motor control unit. The motor is a permanent magnet brushless DC motor with an external rotor structure, and the motor includes a stator mounted onto the fitness equipment support and an external rotor sheathed on the stator and rotatable with respect to the stator, and the rally rope is wound around the external rotor of the motor, and an end of the rally rope is coupled to the external rotor of the motor, and the other end of the rally rope is coupled to the power driving mechanism of the fitness equipment; the power driving mechanism is provided for driving the external rotor of the motor through the rally rope to rotate and generate a rally, and the motor control unit controls the motor to rotate in an opposite direction through the motor driving module, so as to produce a load force opposite to the rally. The weight loading system for fitness equipments structure is simple, lightweight, and achieves the effect of a stepless weight control.

A mobile loading dock for a vehicle including a load-bearing, fixed frame with a support plate connected to diagonal supports and horizontal support members. The dock has a planar ramp member with an underside including a wheel assembly. The assembly has a tension spring and hydraulic member attached to the underside. The tension spring exerts a pulling force and the hydraulic member exerts a pushing force. The combined forces are directionally disposed to erect the assembly when the lower end of the dock is raised from a resting position in contact with the ground surface to a mobile position.

An apparatus includes a processing apparatus that processes raw material in an airtight state, an accommodation section that accommodates the raw material, a first feeding path that is provided outside the processing apparatus and receives the raw material from the accommodation section, and a second feeding path having upstream and downstream ends that are outside and inside the processing apparatus, respectively. The second feeding path receives the raw material from the first feeding path. The apparatus also includes a joint section that separates and joins the first path and the second path, and a closing section that is positioned in the second path closer to the processing apparatus than the joint section and maintains the processing apparatus, and the second path in an airtight state when the joint section separates the first path and the second path.

A device is provided for collapsing a stented bioprosthetic valve, including first section and second sections, each spanning between first and second ends of the device. The second section of the device is associated with the first section to at least partially enclose an internal cavity formed by the first and second sections, the internal cavity tapering from an open insertion portion at a first end of the device to an open exit portion at a second end of the device. The insertion portion has a larger dimension than the exit portion. When the first section and second section are substantially enclosing the internal cavity, a stented bioprosthetic valve may be inserted into the insertion portion and collapsed as it is moved toward and through the exit portion. The valve may then be loaded on an apparatus for insertion into the body.

The application relates to freight loading systems for transporting freight items. Corresponding freight loading system comprises a freight deck having a plurality of freight handling devices, a control device which is communicatively connected to the freight handling devices in order to handle at least one freight item on the freight deck, and a remote control, which is communicatively connected to the control device in order to output control signals to the control device. The control device is intended to comprise a position determination unit for determining a remote control position on the freight deck and/or the orientation of the remote control, wherein the control unit is designed to select a number of freight handling devices and drive same depending on the control signals received and the remote control position and/or orientation of the remote control. This allows easier control of the freight items on the freight deck.

A center loading assembly for a conveyor belt having a carriage support attached to a belt conveyor main frame and having a carriage within the carriage support. The carriage has a center member with side members extending at an angle therefrom, each having an upward extension. The upward extensions have side rollers and conveyor belt covering skirts and keep the conveyor belt centered between the conveyor belt covering skirts. The carriage support has vertical bearings to support the carriage and side bearings to hold the carriage on the vertical bearings. The carriage and conveyor belt covering skirts follow a trough angle of the conveyor belt as the conveyor belt shifts. Material deposited onto the conveyor belt is deflected to the center portion of the conveyor belt by the conveyor belt covering skirts.

A mobile platform has a separate and independent linear actuator pivotally connected near each opposite end of the platform where there is a contact limit switch that when triggered by contact with the side of a flatbed, stops movement of the actuator, and thus stops movement of the platform, toward the side of the flatbed. Because each of the two actuators is pivotally connected to its respective end of the platform and moves independently of the other, each end of the platform can stop moving toward the flatbed before or after, depending on how the flatbed is misaligned, the other end of the platform stops moving toward the flatbed. In this way the platform self-aligns to the alignment of the flatbed and avoids the need to reposition a flatbed that is not precisely aligned parallel to the central axis of the loading bay.