Kingdom Mugadza helps explain why Tirisano Partners are deciding to withdraw from coal.

Stonegate Center, a residential treatment facility for drugs and alcohol just west of Fort Worth, Texas, adds detox and medical stabilization to its portfolio of addiction treatment services.

Pivot Treatment and Wellness Centers Hires Recovery Expert Wayne Stewart as National Director of Business Development

Baladna announced the signing of an agreement with "Muntajat" to supply plastic raw materials used in the manufacture of milk

The organization CEOs For Cities released a widely-cited report last month titled Measuring Urban Transportation Performance: A Critique Of Mobility Measures And Synthesis (71p. PDF). Their research finds that the secret to reducing the amount of time Americans spend in peak hour traffic has more to do with how we build our cities than how we build our roads.

The report explains how the cities studied have managed to achieve shorter travel times and actually reduce the peak hour travel times. Some metropolitan areas have land use patterns and transportation systems that enable their residents to take shorter trips and minimize the burden of peak hour travel.

This runs counter to the conclusions of the Texas Transportation Institute's Urban Mobility Report year after year. The CEO For Cities document explains that the UMR approach has completely overlooked the role that variations in travel distances play in driving urban transportation problems.

In the best performing cities -- those that have achieved the shortest peak hour travel distances -- such as Chicago, Portland and Sacramento, the typical traveler spends 40 fewer hours per year in peak hour travel than the average American. Because of smart land use planning and investment in alternative transportation, Portland has seen its average trip lengths decline by 20%.

In contrast, in the most sprawling metropolitan areas, such as Nashville, Indianapolis and Raleigh, the average resident spends as much as 240 hours per year in peak period travel because travel distances are so much greater. The report's 20-page Executive Summary is titled Driven Apart: How Sprawl Is Lengthening Our Commutes And Why Misleading Mobility Measures Are Making Things Worse.

In The New Sharing Economy, a study by Latitude in collaboration with Shareable Magazine, the authors look at new opportunities for sharing.

An interesting graph (click to enlarge) plots various endeavors on a market saturation and latent demand scale. The resulting plot points fall into four quandrants, labeled:

Low Interest and Low Prior Success (e.g. bike, outdoor sporting goods)

Done Well Already (e.g. work space, storage space, food co-op)

Opportunities Still Remain (e.g. physical media, digital media)

Best New Opportunities (automobile, time/responsibilities, money lending/borrowing)

This last category, Best New Opportunities, provides the launch point for discussion of car sharing. The report notes that there's still a large amount of unfulfilled demand for car-sharing. More than half of all participants surveyed either shared vehicles casually or weren't sharing currently but expressed interest in doing so. For people who share in an organized fashion, cars and bikes were popular for sharing amongst family and close friends but weren't commonly shared outside this immediate network, relative to other categories of goods.

This intriguing and visually appealing report goes on to point out the new sharing takeaways for non-sharing businesses, including "we-based brands," the value in social and alternative currencies, and the "contagiousness" of sharing.

Finally, Transportation For America recently released a White Paper titled Smart Mobility For A 21st Century America: Strategies For Maximizing Technology To Minimize Congestion, Reduce Emissions And Increase Efficiency (39p. PDF).

It proposes that improving transportation efficiency through operational innovation is critical as our population grows and ages, budgets tighten and consumer preferences shift.

As Congress prepares to review and reauthorize the nation’s transportation program, an array of innovations that were either overlooked or did not exist at the time of previous authorizations can be incentivized.

Just as the Internet, smart phones and social media changed they way we acquire news, listen to music or connect with friends and family, these same innovations have implications for how we move around. While high-tech gadgets can be a problem when they distract motorists from driving, they open up a whole new world for people using other modes.

But what if we could manage traffic to help drivers avoid congestion before they get stuck in it? What if you always knew when the next bus was going to arrive, the closest parking space or which train car had a seat available for you? The innovative technologies and strategies outlined in the White Paper include:

Making transportation systems more efficient (e.g. ramp meters, highway advisory radio)
Providing more travel options (e.g. online databases to match up vanpool riders, car-sharing services)
Providing travelers with better, more accurate, and more connected information (e.g. computerized vehicle tracking)
Making pricing and payments more convenient and efficient (e.g. EZ passes, electronic benefits)
Reducing trips and traffic (flex-time, consolidating services online)

There is a wealth of research and literature explaining suburban sprawl and the urgent need to retrofit suburbia. However, until now there has been no single guide that directly explains how to repair typical sprawl elements.

Developer Chris Crawford bemoans the industry's short-sighted outlook, and suggests it might be better to plant oaks than short-lived weeds. ...

Developer Chris Crawford bemoans the industry's short-sighted outlook, and suggests it might be better to plant oaks than short-lived weeds. ...

Developer and SEO/marketing teams can proactively test web pages for SEO impact

Kotak Mahindra Bank vs RBI: Bank to withdraw court case, pare promoter stake to 26%

The offering of ‘Cardless Cash Withdrawal’ from iMobile enables customers to withdraw cash securely and conveniently for everyday usage and purchases, all from the convenience of their mobile phone. Here is a look at how you can use this facility.

It is important that your correct bank account with IFSC is linked to your Universal Account Number (UAN) to receive the credit of EPF funds timely.

The PFRDA, in a circular dated April 9, 2020, has declared coronavirus infection as a critical illness that is life-threatening in nature. Accordingly, partial withdrawal from NPS has been allowed for covering expenses related to the treatment of COVID-19.

About 20% of the auto retail network, or 3,500 outlets, opened for business this week, with one-third staff to comply with social-distancing norms. As of Wednesday evening, some 50,000-60,000 employees were back at work, industry insiders said.

Cengage Learning Holdings II Inc. and McGraw-Hill Education Inc. mutually agreed to abandon their plans to merge after the Department of Justice informed the companies it had serious concerns that the proposed transaction, as structured, would harm competition.

McGraw, Richard Allen Apr 1, 1946 - May 4, 2020 Richard Allen McGraw, 74, of Port Charlotte, Florida, died on May 4, 2020. Funeral .....

On Wednesday, June 15, Grand Canyon National celebrated the completion of two years of improvements to the Mather Point and Grand Canyon Visitor Center area, and hundreds showed up to join in the celebration. https://www.nps.gov/grca/learn/news/2011-06-21_event.htm

Piers Morgan has given an update on GMB host Kate's husband Derek Draper who is battling coronavirus

TIM MCGRAW has incorporated his new BIG MACHINE RECORDS single, "I Called Mama," into an AMERICAN GREETINGS eCard for Mother's Day (5/10). The card is part of the greeting card … more

Refresh Seattle – February 2014 First off, what is Refresh? According to their website… Refresh Seattle is a community of designers and developers working to refresh the creative, technical, and professional culture of New Media endeavors in the Seattle/Puget Sound area. Promoting design, technology, usability, and standards, Refresh Seattle is a part of Refresh and […]

Get in on the hand-drawn vector illustration trend without leaving the digital realm with this fun and tropical pattern tutorial. Tutorial Details: 7 Steps for Easy Flat Work Hand-Drawn Vector Design Program: Adobe Illustrator CS6 – CC Difficulty: Intermediate Topics Covered: Design Theory, Drawing Skills, Tracing Panel Estimated Completion Time: 15 Minutes Final Image: Hand-drawn Vector […]

The post 7 Steps to Create Hand-drawn Vector Patterns appeared first on Vectips.

In this tutorial we’ll draw a funny cartoon car in a simple stylized flat car. We don’t actually need any advanced drawing skills or even a tablet to create this stylized object as we’ll be working with basic geometric shapes and the most useful tools of Adobe Illustrator. Such simple and trendy illustrations are perfect […]

The post How to Draw a Stylized Flat Car in Adobe Illustrator appeared first on Vectips.

Recent advances in deep learning have facilitated the design of speaker verification systems that directly input raw waveforms. For example, RawNet extracts speaker embeddings from raw waveforms, which simplifies the process pipeline and demonstrates competitive performance. In this study, we improve RawNet by scaling feature maps using various methods. The proposed mechanism utilizes a scale vector that adopts a sigmoid non-linear function. It refers to a vector with dimensionality equal to the number of filters in a given feature map. Using a scale vector, we propose to scale the feature map multiplicatively, additively, or both. In addition, we investigate replacing the first convolution layer with the sinc-convolution layer of SincNet. Experiments performed on the VoxCeleb1 evaluation dataset demonstrate the effectiveness of the proposed methods, and the best performing system reduces the equal error rate by half compared to the original RawNet. Expanded evaluation results obtained using the VoxCeleb1-E and VoxCeleb-H protocols marginally outperform existing state-of-the-art systems.

Most studies on speaker verification systems focus on long-duration utterances, which are composed of sufficient phonetic information. However, the performances of these systems are known to degrade when short-duration utterances are inputted due to the lack of phonetic information as compared to the long utterances. In this paper, we propose a method that compensates for the performance degradation of speaker verification for short utterances, referred to as "crop aggregating". The proposed method adopts an ensemble-based design to improve the stability and accuracy of speaker verification systems. The proposed method segments an input utterance into several short utterances and then aggregates the segment embeddings extracted from the segmented inputs to compose a speaker embedding. Then, this method simultaneously trains the segment embeddings and the aggregated speaker embedding. In addition, we also modified the teacher-student learning method for the proposed method. Experimental results on different input duration using the VoxCeleb1 test set demonstrate that the proposed technique improves speaker verification performance by about 45.37% relatively compared to the baseline system with 1-second test utterance condition.

A data transfer control apparatus includes a transferring unit that transfers data from a transfer source memory to a transfer destination memory, according to an instruction from a first processor; and a first processor configured to detect a process execute by the first processor, determine whether transfer of the data is urgent, based on the type of the detected process, and control the transferring unit or the first processor to transfer the data, based on a determination result.

There is provided a method for producing an aqueous acrylamide solution by reacting a composition including acrylonitrile with water to produce acrylamide, in which the composition including acrylonitrile includes 3 to 15 mg of propionitrile per 1 kg of the total weight of the composition including acrylonitrile. According to the present invention, a production method with which it is possible to suppress acrylamide polymerization without lowering quality and thereby obtain a stable aqueous acrylamide solution can be provided.

A source device to provide power through a network cable and a user device is to draw power from the network cable. A database is to store a parameter associated with the user device. The source device is to access the stored parameter based on receipt of information related to the user device and is to compare at least one of a current power drawn and an additional power requested by the user device to a power limit of the user device based on the accessed parameters. The source device is to send a power message to the user device based on the comparison, the power message to relate to an amount of the power the user device is to draw.

The invention includes halichondrin B analogs having pharmaceutical activity; in some cases, crystalline forms thereof, and in some cases, halichondrin B analogs having a further utility as synthetic intermediate.

The invention relates to 17-hydroxy-17-pentafluoroethyl-estra-4,9(10)-dien-11-aryl derivatives of formula I with progesterone-antagonizing action and methods of production thereof, use thereof for the treatment and/or prevention of diseases and use thereof for producing medicinal products for the treatment and/or prevention of diseases, in particular uterine fibroids (myomata, uterine leiomyomata), endometriosis, heavy menstrual bleeding, meningiomata, hormone-dependent breast cancers and menopause-associated complaints or for fertility control and emergency contraception.

Provided is a method of producing an electrophotographic photosensitive member having improved sensitivity and capable of outputting an image having less image defects due to a ghost phenomenon not only under a normal-temperature, normal-humidity environment but also under a low-temperature, low-humidity environment as a particularly severe condition. The method of producing a gallium phthalocyanine crystal includes subjecting a gallium phthalocyanine and a specific amine compound, which are added to a solvent, to a milling treatment to perform crystal transformation of the gallium phthalocyanine. In addition, the gallium phthalocyanine crystal is used in the photosensitive layer of the electrophotographic photosensitive member.

A pattern forming method contains: (i) a step of forming a bottom anti-reflective coating on a substrate by using a first resin composition (I), (ii) a step of forming a resist film on the bottom anti-reflective coating by using a second resin composition (II), (iii) a step of exposing a multi-layered film having the bottom anti-reflective coating and the resist film, and (iv) a step of developing the bottom anti-reflective coating and the resist film in the exposed multi-layered film by using an organic solvent-containing developer to form a negative pattern.

A method of voting with your feet is disclosed. A performance of a location-based action by a player of a computer-implemented game is associated with a vote on a matter. The performance of the location-based action by the player is detected. A count of votes corresponding to the vote on the matter is incremented based on the detecting of the performance of the location-based action by the player.

A heterocyclic compound represented by Formula 1 or Formula 2 below and an organic light-emitting device including the heterocyclic compound: wherein X1, X2, and R1 through R16 are defined as in the specification.

The invention concerns a harvested crop residue chopper and distribution arrangement for a combine (10) with a straw chopper (60) with a rotor (74) that can be brought into rotation about a horizontal axis (98) with chopper blades (76) fastened thereto that define an outer envelope (96), and with at least one impeller blower (82) arranged downstream of the straw chopper (60) with impeller blades (84) that can rotate about an axis of rotation (88) that extends vertically, in which the impeller blades (84) are provided with outer edges (94) that conform to the envelope (96) of the chopper knives (76) and follow it very closely and are not in contact with it.

A work hanging apparatus includes a hanger line continuously conveying hangers each having a hook, a robot that has a hand with which a work having a hole is held and transfers the held work to a hanging location set in the hanger line, a controller controlling a movement of the hand to catch the hook of one of the hangers with the hole of the held work at the hanging location, a hole deviation detector that detects a positional deviation of the hole of the work, an attitude deviation detector that detects an attitudinal deviation of the hanger, and a corrector that corrects the movement of the hand according to the positional and attitudinal deviations.

A cabinet structure for a switchgear assembly. The cabinet structure includes a cabinet having upper and lower vents and a breaker cradle for holding a circuit breaker having primary disconnects for connecting the circuit breaker to bus bars. The cabinet further includes an air passageway located between the upper and lower vents, wherein the air passageway extends vertically through the primary disconnects and the cabinet. Further, the cabinet includes a fan module having at least one fan for drawing outside air through the lower vent, the air passageway and the primary disconnects for cooling the primary disconnects.

The present invention provides a raw material for forming a strontium-containing thin film of a cyclopentadienyl-based strontium compound, which is in the liquid state at room temperature to 50° C., can be purified by distillation, present as a monomer, has high vapor pressure, and suitable for mass production, and a process for preparing the same. Sr[C5(CH3)4(C3H7)]2 is prepared by reacting Na[C5(CH3)4(C3H7)]2 or K[C5(CH3)4(C3H7)]2 with SrI2 in THF to produce a THF adduct of Sr[C5(CH3)4(C3H7)]2; evaporating THF and extracting the residue with toluene to give a toluene solution; evaporating toluene and drying the residue under reduced pressure; and heating to 100 to 160° C. in vacuo to dissociate and remove THF and distilling.

A method of preparing soybean mixed powder comprising a soybean powder having properties wherein formation of agglomerate is small when the powder is added to water and then heated with stirring to dissolve the powder.

An image sensing and printing digital camera device includes a housing defining a slot for receiving a printed instruction card having printed thereon an array of dots representing a programming script, the housing further storing therein a roll of print media; an area image sensor for sensing an image and generating pixel data representing the image; a linear image sensor for scanning the array of dots on the card and converting the array of dots into a data signal; a microcontroller provided in the housing, the microcontroller for decoding the data signal into the programming script and applying the programming script on the pixel data; and a printing mechanism for printing the pixel data, having applied thereto the programming script, on the roll of print media. The microcontroller integrates on a single chip a VLIW processor, a printhead interface, and an output buffer effecting communication between the VLIW processor and the printhead interface.

To suppress malfunctions in a shift register circuit. A shift register having a plurality of flip-flop circuits is provided. The flip-flop circuit includes a transistor 11, a transistor 12, a transistor 13, a transistor 14, and a transistor 15. When the transistor 13 or the transistor 14 is turned on in a non-selection period, the potential of a node A is set, so that the node A is prevented from entering into a floating state.

The present invention provides an electroconductive sheet and a touch panel which do not impair visibility in a vicinity of an electrode terminal in a sensing region. In an electroconductive sheet which has an electrode pattern constructed of a metal thin wire and an electrode terminal that is electrically connected to an end of the electrode pattern, a transmittance of the electrode pattern is 83% or more, and when the transmittance of the electrode pattern is represented by a %, a transmittance of the electrode terminal is controlled to be (a-20)% or more and (a-3)% or less.

A pressurized water nuclear reactor (PWR) includes a once through steam generator (OTSG) disposed in a generally cylindrical pressure vessel and a divider plate spaced apart from the open end of a central riser. A sealing portion of the pressure vessel and the divider plate define an integral pressurizer volume that is separated by the divider plate from the remaining interior volume of the pressure vessel. An internal control rod drive mechanism (CRDM) has all mechanical and electromagnetomotive components including at least a motor and a lead screw disposed inside the pressure vessel. Optionally CRDM units are staggered at two or more different levels such that no two neighboring CRDM units are at the same level. Internal primary coolant pumps have all mechanical and electromagnetomotive components including at least a motor and at least one impeller disposed inside the pressure vessel. Optionally, the pumps and/or CRDM are arranged below the OTSG.

A pressurized water reactor (PWR) includes a vertical cylindrical pressure vessel having a lower portion containing a nuclear reactor core and a vessel head defining an internal pressurizer. A reactor coolant pump (RCP) mounted on the vessel head includes an impeller inside the pressure vessel, a pump motor outside the pressure vessel, and a vertical drive shaft connecting the motor and impeller. The drive shaft does not pass through the internal pressurizer. A central riser may be disposed concentrically inside the pressure vessel, and the RCP impels primary coolant downward into a downcomer annulus between the central ser and the pressure vessel. A steam generator may be disposed in the downcomer annulus and spaced apart from with the impeller by an outlet plenum, A manway may access the outlet plenum so tube plugging can be performed on the steam generator via access through the manway without removing the RCP.

A ramp for launching an object at a target is provided, the ramp having: a release mechanism mounted to the ramp for movement between a first position and a second position, wherein the release mechanism is configured to retain the object with respect to the ramp when it is in the first position and wherein the release mechanism is configured to release the object when the release mechanism is in the second position; and wherein the release mechanism further comprises an arm member pivotally mounted to the ramp and the arm member has a plurality of features each spaced from each other and extending from the arm member above a surface of the ramp when the release mechanism is in the first position.

An apparatus is for shuffling a plurality of playing cards used in gaming. The apparatus includes a card support adapted to support the unshuffled cards on-edge. An exciter is also included, and is adapted to impart vibrational action to the supported cards. Cards drop in a random fashion such as by controlling the relative position of the cards and passage through one or more card slots in a card rest. In at least some of the apparatuses, a medial card receiver is adapted to receive at least one card dropped from the card support and to retain the at least one received card to substantially block the card slot to prevent further cards from dropping. A positioner is preferably included to change a relative position of the unshuffled deck and card slots though which the cards drop.

A flexible tubular item having an outer flexible section of hollow tubing with a first end and a second end, a flexible wire positioned within the hollow tubing, a flexible paint layer covering an exterior surface of the flexible wire, and a viscous liquid contained within the hollow tubing. The hollow tubing is a transparent vinyl tube. The flexible wire is copper wire having a bend resistance greater than the bend resistance of the hollow tubing. The liquid is mineral oil filling the area around the flexible wire within the hollow tubing. Ball members are affixed in liquid-tight relationship within the first and second ends of the hollow tubing. These ball members are acrylic spheres having a diameter greater than the interior diameter of the hollow tubing.

A simple manufacturing method for an organic electroluminescent panel in which organic electroluminescent elements are arranged and sealed by a sealing adhesive. The electroluminescent panel has excellent sealing properties and excellent durability as a result of the organic electroluminescent elements being adhered to one another by a heat-curable adhesive. The manufacturing method is for an organic electroluminescent panel in which at least a first electrode, an organic functional layer containing a light-emitting layer, an organic electroluminescent element having a second electrode, and a sealing substrate are bonded together on a substrate by the heat-curable adhesive. The method includes forming a heat-curable adhesive layer on the sealing substrate, subjecting the heat-curable adhesive layer formed on the sealing substrate to pre-heating treatment, bonding the pre-heated heat-curable adhesive layer to the organic electroluminescent element, and subjecting the heat-curable adhesive layer to heat curing, in the given order.

A cabinet drawer includes a molded drawer floor having a central portion including at least one depression, each depression having a bottom wall and a sidewall having an inner surface and an outer surface. A flange extends outwardly from an upper edge of each depression. A plurality of webs extends outward from each depression outer surface for connection with a drawer slide system. A peripheral edge of the flange includes a plurality of deflectable tabs for coupling to a surrounding fence without the use of fasteners. The fence includes a skirt portion extending downward from the drawer floor flange to hide any drawer slide mechanism coupling the drawer floor to any underlying base.

Systems, methods and apparatus are provided through which in some implementations an expandable or adjustable snap-in cam or other friction device having a mechanically lockable drawer, shelf or divider in a cabinet, pantry, kitchen cupboard mount includes no screws or other permanent mounting.

A drawer assembly includes a carrier frame and a sliding basket mounted in the carrier frame and movable in forward-backward direction relative to the carrier frame. The carrier frame includes a front open frame, a rear open frame, a first supporting rod and a second supporting rod. The first and second supporting rods are respectively connected between the front open frame and the rear open frame. The sliding basket includes a first limiter member disposed at one lateral side relative to the first supporting rod and defining a first concave portion and a first stop portion connected to the first concave portion. The first stop portion is disposed at the bottom side of the first supporting rod. Thus, the sliding basket is escaping out of the carrier frame in upward direction.