We developed a process to address terrestrial wildlife species for which management for ecosystem diversity may be inadequate for providing ecological conditions capable of sustaining viable populations. The process includes (1) identifying species of conservation concern, (2) describing source habitats, and other important ecological factors, (3) organizing species into groups, (4) selecting surrogate species for each group, (5) developing surrogate species assessment models; (6) applying surrogate species assessment models to evaluate current and historical conditions, (7) developing conservation considerations, and (8) designing monitoring and adaptive management. Following the application of our species screening criteria, we identified 209 of 700 species as species of concern on National Forest System lands east of the Cascade Range in Washington state. We aggregated the 209 species of conservation concern into 10 families and 28 groups based primarily on their habitat associations (these are not phylogenetic families). We selected 32 primary surrogate species (78 percent birds, 17 percent mammals, 5 percent amphibians) for application in northeastern Washington, based on risk factors and ecological characteristics. Our assessment documented reductions in habitat capability across the assessment area compared to historical conditions. We combined management considerations for individual species with other surrogate species to address multiple species. This information may be used to inform land management planning efforts currently underway on the Okanogan-Wenatchee and Colville National Forests in northeastern Washington.

The INTERACTIVE ADVERTISING BUREAU has released its third buy-side survey of the impact of the COVID-19 CORONAVIRUS pandemic, looking at the trends from MARCH to APRIL and finding that 97% of … more

Industry insiders receive ALL ACCESS' exclusive MEDIABASE chart recap analysis in their e-mail box every MONDAY morning. How about you? This week's data from ANTHONY ACAMPORA, Partner … more

People with type 2 diabetes are at an increased risk for heart failure and many people have both diseases, which requires careful medical management.

Research Highlights: Teens who have obesity, type 2 diabetes or high systolic blood pressure show greater signs of blood vessel aging compared to healthy, normal weight teens. Thicker and stiffer blood vessels were more likely among teens that had...

Research Highlights: Middle-aged adults who walked the most steps-per-day had a 43% lower risk of diabetes and a 31% lower risk of high blood pressure, compared to people of similar age who accumulated the lowest number of daily steps. Among women, ...

Puntos destacados de la investigación: Los adultos de mediana edad que caminaron una mayor cantidad de pasos al día mostraron un 43% menos de riesgo de padecer diabetes y un 31% menos de riesgo de hipertensión arterial, en comparación con personas de...

DALLAS and ARLINGTON, April 23, 2020 — As emerging science around COVID-19 highlights elevated danger for people with diabetes, heart disease and stroke[1], the American Heart Association and the American Diabetes Association urge people living with type...

Botones para compartir de AddThis Compartir en Facebook Compartir en Twitter Compartir por correo electrónico Compartir para imprimir DALLAS y ARLINGTON, 23 de abril del 2020 — Debido a que la ciencia que emerge en torno al COVID-19...

This paper addresses the problem of identifying the graph structure of a dynamical network using measured input/output data. This problem is known as topology identification and has received considerable attention in recent literature. Most existing literature focuses on topology identification for networks with node dynamics modeled by single integrators or single-input single-output (SISO) systems. The goal of the current paper is to identify the topology of a more general class of heterogeneous networks, in which the dynamics of the nodes are modeled by general (possibly distinct) linear systems. Our two main contributions are the following. First, we establish conditions for topological identifiability, i.e., conditions under which the network topology can be uniquely reconstructed from measured data. We also specialize our results to homogeneous networks of SISO systems and we will see that such networks have quite particular identifiability properties. Secondly, we develop a topology identification method that reconstructs the network topology from input/output data. The solution of a generalized Sylvester equation will play an important role in our identification scheme.

A natural problem in the context of the coupon collector's problem is the behavior of the maximum of independent geometrically distributed random variables (with distinct parameters). This question has been addressed by Brennan et al. (British J. of Math. & CS. 8 (2015), 330-336). Here we provide explicit asymptotic expressions for the moments of that maximum, as well as of the maximum of exponential random variables with corresponding parameters. We also deal with the probability of each of the variables being the maximal one.

The calculations lead to expressions involving Hurwitz's zeta function at certain special points. We find here explicitly the values of the function at these points. Also, the distribution function of the maximum we deal with is closely related to the generating function of the partition function. Thus, our results (and proofs) rely on classical results pertaining to the partition function.

In this paper, we work on intra-variable handwriting, where the writing samples of an individual can vary significantly. Such within-writer variation throws a challenge for automatic writer inspection, where the state-of-the-art methods do not perform well. To deal with intra-variability, we analyze the idiosyncrasy in individual handwriting. We identify/verify the writer from highly idiosyncratic text-patches. Such patches are detected using a deep recurrent reinforcement learning-based architecture. An idiosyncratic score is assigned to every patch, which is predicted by employing deep regression analysis. For writer identification, we propose a deep neural architecture, which makes the final decision by the idiosyncratic score-induced weighted average of patch-based decisions. For writer verification, we propose two algorithms for patch-fed deep feature aggregation, which assist in authentication using a triplet network. The experiments were performed on two databases, where we obtained encouraging results.

Recent works imply that the channel pruning can be regarded as searching optimal sub-structure from unpruned networks.

However, existing works based on this observation require training and evaluating a large number of structures, which limits their application.

In this paper, we propose a novel differentiable method for channel pruning, named Differentiable Markov Channel Pruning (DMCP), to efficiently search the optimal sub-structure.

Our method is differentiable and can be directly optimized by gradient descent with respect to standard task loss and budget regularization (e.g. FLOPs constraint).

In DMCP, we model the channel pruning as a Markov process, in which each state represents for retaining the corresponding channel during pruning, and transitions between states denote the pruning process.

In the end, our method is able to implicitly select the proper number of channels in each layer by the Markov process with optimized transitions. To validate the effectiveness of our method, we perform extensive experiments on Imagenet with ResNet and MobilenetV2.

Results show our method can achieve consistent improvement than state-of-the-art pruning methods in various FLOPs settings. The code is available at https://github.com/zx55/dmcp

Recently, the Edge Computing paradigm has gained significant popularity both in industry and academia. Researchers now increasingly target to improve performance and reduce energy consumption of such devices. Some recent efforts focus on using emerging RRAM technologies for improving energy efficiency, thanks to their no leakage property and high integration density. As the complexity and dynamism of applications supported by such devices escalate, it has become difficult to maintain ideal performance by static RRAM controllers. Machine Learning provides a promising solution for this, and hence, this work focuses on extending such controllers to allow dynamic parameter updates. In this work we propose an Adaptive RRAM Variability-Aware Controller, AVAC, which periodically updates Wait Buffer and batch sizes using on-the-fly learning models and gradient ascent. AVAC allows Edge devices to adapt to different applications and their stages, to improve computation performance and reduce energy consumption. Simulations demonstrate that the proposed model can provide up to 29% increase in performance and 19% decrease in energy, compared to static controllers, using traces of real-life healthcare applications on a Raspberry-Pi based Edge deployment.

By Lauren McCauley Common Dreams In landmark agreement, California’s last remaining nuclear plant will be replaced by greenhouse-gas-free energy sources A plan to shutter the last remaining nuclear power plant in California and replace it with renewable energy is being … Continue reading →

To provide a latent variable model estimation apparatus capable of implementing the model selection at high speed even if the number of model candidates increases exponentially as the latent state number and the kind of the observation probability increase. A variational probability calculating unit 71 calculates a variational probability by maximizing a reference value that is defined as a lower bound of an approximation amount, in which Laplace approximation of a marginalized log likelihood function is performed with respect to an estimator for a complete variable. A model estimation unit 72 estimates an optimum latent variable model by estimating the kind and a parameter of the observation probability with respect to each latent state. A convergence determination unit 73 determines whether a reference value, which is used by the variational probability calculating unit 71 to calculate the variational probability, converges.

In one embodiment, a system includes a data collection system configured to collect a data from a control system by using an offline mode of operations. The system further includes a configuration management system configured to manage a hardware configuration and a software configuration for the control system based on the data. The system additionally includes a rule engine configured to use the data as input and to output a health assessment by using a rule database, and a report generator configured to provide a health assessment for the control system.

In one embodiment, a processor includes at least one functional block and banking logic. The banking logic may be to determine an average reliability metric associated with the at least one functional block. The banking logic may also be to, if the average reliability metric exceeds a required level, implement a reduced reliability mode in the at least one functional block, where the reduced reliability mode is associated with a reduction in the average reliability metric. Other embodiments are described and claimed.

The present inventions are related to systems and methods for data processing, and more particularly to systems and methods for variable rate coding in a data processing system.

A method and circuit arrangement utilize a low latency variable transfer network between the register files of multiple processing cores in a multi-core processor chip to support fine grained parallelism of virtual threads across multiple hardware threads. The communication of a variable over the variable transfer network may be initiated by a move from a local register in a register file of a source processing core to a variable register that is allocated to a destination hardware thread in a destination processing core, so that the destination hardware thread can then move the variable from the variable register to a local register in the destination processing core.

This disclosure relates generally to systems and methods for simulating physical active semiconductor components using in silico active semiconductor components. To simulate charge degradation effect(s) in a circuit simulation, a simulated defect signal level is produced. More specifically, the simulated defect signal level simulates at least one charge degradation effect in the in silico active semiconductor component as a function of simulation time and a simulated input signal level of a simulated input signal. As such, the charge degradation effect(s) are simulated externally with respect to the in silico active semiconductor component. In this manner, the in silico active semiconductor component does not need to be reprogrammed in order to simulate charge degradation effects.

A tunable resonator is provided that has a high Q for each resonate frequency. The tunable resonator is a MEMs tunable resonator wherein the tuner is affected by moving a moveable mass, associated with the resonating portion of the resonator, form a first position to a second position such that the moveable mass is held in the first position or second position by a detent rather than a constant electromagnet magnetic or electrostatic force applied thereon.

A memory system includes a volatile first storing unit, a nonvolatile second storing unit, and a controller. The controller performs data transfer, stores management information including a storage position of the data stored in the second storing unit into the first storing unit, and performs data management while updating the management information. The second storing unit has a management information storage area for storing management information storage information including management information in a latest state and a storage position of the management information. The storage position information is read by the controller during a startup operation of the memory system and includes a second pointer indicating a storage position of management information in a latest state in the management information storage area and a first pointer indicating a storage position of the second pointer. The first pointer is stored in a fixed area in the second storing unit and the second pointer is stored in an area excluding the fixed area in the second storing unit.

The variable domain data access control system and method described herein use the same variable domain to describe a data security model and a variable domain data model, such as a product configuration model. A variable domain is a set of resource data that can be described using a logical relationship data structure. The variable domain utilizes logical relationship expressions, such as a Boolean logic language, to define resource data in terms of parts, rules and/or attributes, and any other property that can be accessed for viewing, manipulation, or other purposes. The data security model represents an access control list (ACL) that includes security attributes as resource data and uses the same data structure and logical relationship expressions as an associated variable domain data model. An application, such as a configuration engine, can be used to create controlled access to the variable domain data model using the data security model.

Described is a bass drum foot pedal having a variable drive lever linkage with variable arc ratios connecting the foot pedal to a beater bracket. The beater bracket is formed with a mounting surface that tips a beater shaft forward to create a forward beater angle that maximizes the beater impact against a bass drum.

A vehicle powertrain has an engine, a driving shaft having a passage defined therein, a driven shaft, a pump, a hydraulic fluid reservoir, and a CVT. A driving pulley of the CVT includes a fixed sheave and a movable sheave disposed on the driving shaft for rotation therewith, a spring biasing a movable sheave away from the fixed sheave, and a CVT chamber fluidly communicating with the passage of the driving shaft. The pump supplies hydraulic fluid from the reservoir to the passage in the driving shaft. The hydraulic fluid flows from the passage to the CVT chamber to create a hydraulic pressure in the CVT chamber. The hydraulic pressure in the CVT chamber biases the movable sheave toward the fixed sheave.

A continuously variable transmission for a vehicle comprises a primary pulley, a secondary pulley, and a belt entrained around both pulleys in an opposite manner between the fixed and movable sheaves thereof. One pulley carries a selectively deployable stop that may be placed into position to mechanically limit the range of motion between the fixed and movable sheaves. This establishes an actual maximum transmission ratio that is larger than the nominal minimum transmission ratio but smaller than the nominal maximum transmission ratio achievable by the transmission during normal operation thereof. When such a transmission is used on a utility vehicle attached to a substance dispensing applicator operatively driven by the vehicle's engine, the application rate stays substantially constant despite changes in engine speed when the user keeps the transmission upshifted to the actual maximum transmission ratio set by the position of the deployed stop.

A belt-type continuously variable transmission for a vehicle includes: a primary pulley including a first fixed sheave fixed to an input shaft, and a first movable sheave relatively non-rotatable and relatively movable in axial direction to the input shaft due to spline-fitting of a female spline formed on an inner circumferential portion thereof to a male spline formed on the input shaft; a secondary pulley including a second fixed sheave fixed to an output shaft in parallel with the input shaft, and a second movable sheave relatively non-rotatable and relatively movable in the axial direction to the output shaft due to spline-fitting of a female spline formed on an inner circumferential portion thereof to a male spline formed on the output shaft; and a transmission belt, the belt-type continuously variable transmission for a vehicle disposed with at least one of a first groove width defining portion disposed on the primary pulley for defining a maximum groove width of the first pulley groove and a second groove width defining portion disposed on the secondary pulley for defining a maximum groove width of the second pulley groove, the first groove width defining portion and the second groove width defining portion being disposed on one shaft of the input shaft and the output shaft, and the other shaft having a uniform shaft diameter in an range of sliding of the first movable sheave or the second movable sheave in the axial direction except a site with the male spline formed, the other shaft being disposed on the opposite side to the one shaft.

A chain belt-type continuously variable transmission in which ratchet-type chain belts are wound on driving and driven pulley devices, each of which has a variable diameter, in order to control the shift ratio. Driving belt supports are disposed in a driving pulley device so as to radially contract and expand. Driven belt supports are disposed in a driven pulley device so as to radially contract and expand. Teeth in the front portions of the driving belt supports and the driven belt supports and teeth in the rear portions of the driving belt supports and the driven belt supports are oriented in opposite directions. Front and rear ratchet gears formed on the driving belt supports and the front and rear ratchet gears formed on the driven belt supports are oriented in opposite directions and are arranged in alternating positions without being formed at corresponding positions in a line.

A belt-driven continuously variable transmission having a downsized torque cam assembly for creating forward thrust to push a movable sheave toward a fixed sheave. The belt-driven continuously variable transmission is adapted to output a torque while changing a speed ratio continuously by altering an effective diameter position of a driving belt. The belt-driven continuously variable transmission is comprised of: an output gear, which is fitted onto the rotary shaft of the driven pulley to output the torque while being allowed to rotate relatively; a piston, which is fitted onto the rotary shaft of the driven pulley between the movable sheave and the output gear while being allowed to rotate integrally with the movable sheave and to reciprocate in an axial direction of the rotary shaft, and which increases an internal pressure of the hydraulic chamber by moving toward the movable sheave; and a torque cam assembly, which is interposed between the piston and the output gear, and which pushes the piston toward the movable sheave when the torque transmitted through the driven pulley is increased.

Disclosed herein is a method for manufacturing a screw comprising a continuous thread with a variable thread pitch, in which method a blank is rolled between two rolling dies, wherein in each rolling die a rolling profile is formed that comprises a host of curved non-parallel depressions. The depressions are designed and arranged in such a manner that during rolling no volume transport, or as little volume transport as possible, in the axial direction takes place, or a volume transport from a region of the blank where a thread section with a larger thread pitch is to be formed, to a region in which a thread section with a smaller thread pitch is to be formed takes place.

A continuously variable transmission oil composition comprising a base oil and at least one phosphorous compound in such an amount that the phosphorus in the phosphorus compound accounts for 0.005 to 0.15 mass % of the total mass of the composition and wherein the continuously variable transmission oil composition has a friction coefficient from 0.146 to 0.164 when tested according to ASTM D2714.

Provided is a lubricating oil composition containing a base oil which includes a mineral oil and/or a synthetic oil, and compounded therein, (A) at least one phosphorus-containing compound selected from phosphoric acid monoesters, phosphoric acid diesters and phosphorous acid monoesters, each having a C1 to C8 hydrocarbon group or groups and (B) a tertiary amine compound having C6 to C10 hydrocarbon groups as substituents thereof. The lubricating oil composition provides both a high metal to metal friction coefficient and an excellent wear resistance and is suitably used in a continuously variable transmission.

A device and method for adjusting the magnetic strength of a magnetic end effector for lift systems is described. The magnetic end effector is capable of lifting discriminate payloads by selectively varying the strength of the magnetic forces output by the magnetic end effector. An actuator can be operatively coupled to the variable strength magnet end effector, wherein the actuator is selectively actuatable to control the adjustment of the variable strength magnet. The actuator may also be configured to maintain the variable strength magnet at a desired magnetic force output strength once achieved for any given amount of time.

The relative health of data storage drives may be determined based, at least in some aspects, on data access information and/or other drive operation information. In some examples, upon receiving the operation information from a computing device, a health level of a drive may be determined. The health level determination may be based at least in part on operating information received from a client entity. Additionally, a storage space allocation instruction or operation may be determined for execution. The allocation instruction or operation determined to be performed may be based at least in part on the determined health level.

An improved skin substitute is presented comprised of a silicone layer backed up with a woven nylon fabric layer, the silicone layer possessing a regular pattern of slits that permit the porosity of the skin substitute to be adjusted by clinicians by means of applying tension to the skin substitute that differentially opens the slits. A variety of therapeutic substances can be applied to the skin substitute to promote healing, including aloe and other medicinal preparations.

A variable valve actuating apparatus includes: a first rotary member which includes a rotor fixed to one of the inner cam shaft and the outer cam shaft, and a receiving chamber formed within the first rotary member, and which is arranged to be rotated in an advance angle direction or in a retard angle direction relative to the drive rotary member by a hydraulic pressure selectively supplied to or drained from the advance angle operation chamber and the retard angle operation chamber; and a second rotary member fixed to the other of the inner cam shaft and the outer cam shaft, rotatably received within the receiving chamber of the first rotary member, and arranged to be rotated relative to the first rotary member and the drive rotary member within a predetermined angle range.

A variable valve actuating apparatus includes: a first lock recessed portion; a first lock member; a second lock recessed portion formed in the second rotary member's side; a second lock member; a first lock passage arranged to supply the hydraulic fluid, and thereby to move the first lock member out of the first lock recessed portion; and a second lock passage arranged to supply the hydraulic fluid, and thereby to move the second lock member out of the second lock recessed portion, at least a part of the first lock recessed portion and at least a part of the second lock recessed portion being disposed at a position to be projected in an axial direction when the first lock member and the second lock member are in the lock state.

A phase control apparatus in a variable cam timing (VCT) system of an engine is described herein. The phase control apparatus includes a locking pin coupled to a vane, the locking pin extending into a locking pin recess in a cover plate in a locked configuration, the locking pin and locking pin recess having a backlash and a housing at least partially enclosing the vane and spaced away from the vane forming a gap in the locked configuration.

Provided is a device for wirelessly controlling robots suitable for competition or educational purposes, the device including: an input module configured to receive commands from a human user interface, the human user interface sending signals indicative of inputs by a user to control a robot; a protocol translator configured to translate the received commands into a protocol to which the robot is responsive; a wireless output module configured to wirelessly transmit the translated commands to the robot such that the robot executes the commands.

The present invention relates to engineered multivalent and multispecific binding proteins, methods of making, and specifically to their uses in the prevention, diagnosis, and/or treatment of disease.

The present invention relates to CX3CR1-binding polypeptides, in particular polypeptides comprising specific immunoglobulin domains. The invention also relates to nucleic acids encoding such polypeptides; to methods for preparing such polypeptides; to host cells expressing or capable of expressing such polypeptides; to compositions comprising such polypeptides; and to uses of such polypeptides or such compositions, in particular for prophylactic, therapeutic and diagnostic purposes.

A control device continuously variable transmission for vehicle according to the present invention includes a continuously variable transmission mechanism capable of continuously changing a speed ratio, a sub-transmission mechanism provided in series with the continuously variable transmission mechanism, including a first gear position and a second gear position having a smaller speed ratio than the first gear position as forward gear positions and adapted to switch between the first gear position and the second gear position by selectively engaging or releasing a plurality of frictional engagement elements, and a transmission control unit wherein a vehicle is stopped with the gear position of the sub-transmission mechanism kept in the second gear position when being stopped in a state where the gear position of the sub-transmission mechanism is in the second gear position.

The present invention provides methods and pharmaceutical formulations for treating diabetic foot ulcers.

The invention relates to human medicine and to the use of epidermal growth factor (EGF) for preparing a pharmaceutical composition which is administered by infiltration into the periphery of nerve ganglia and/or trunks for the morphofunctional restoration of peripheral nerves in painful sensory-motor neuropathy as well as manifestations of ischemic neuritis. The invention also includes a composition containing EGF which can be formulated together with anesthetics or analgesics or encapsulated in microspheres and to the use thereof for the morphofunctional restoration of peripheral nerves in painful sensitive-motor-type diabetic neuropathy and the manifestations of ischemic neuritis.

The present invention provides variable mass labeling reagents, a set of the variable mass labeling reagents, and a multiplexed set of variable mass labeling reagents.

The present invention is relevant to human medicine, and, in particular, to the use of Epidermal Growth Factor (EGF) in a pharmaceutical composition, said composition is administered through infiltration at the periphery of nerve trunks and/or ganglia, for the morphofunctional restoration of peripheral nerves in painful, sensory-motor neuropathy, as well as ischemic neuritis. It is also relevant to an EGF containing composition, where this molecule can be formulated together with anesthetic or analgesic drugs, or encapsulated in microspheres, and their use for the morphofunctional restoration of peripheral nerves in painful, sensory-motor neuropathy, as well as in ischemic neuritis.

An assembly for mailing an article requiring delivery by a special service and a method for mailing same are provided. The assembly includes a return postcard and anchor portions removably attached to the return postcard. The anchor portions include adhesive that allows the anchor portions to be attached to a mailpiece. The return postcard includes a special services designator section indicative of the special service required for delivery of the mailpiece. The return postcard is integrally formed, but removably attached, such that the return postcard remains attached to the envelope until received by the addressee, at which time the return postcard may be removed. The assembly is designed to incorporate a form into the return postcard to simplify preparation of the mailpiece for delivery by the special service. Alternatively, the postcard may contain a machine readable code that aids in the delivery and tracking of the mailpiece.

Inventive embodiments are directed to components, subassemblies, systems, and/or methods for continuously variable transmissions (CVT). In one embodiment, a main axle is adapted to receive a shift rod that cooperates with a shift rod nut to actuate a ratio change in a CVT. In another embodiment, an axial force generating mechanism can include a torsion spring, a traction ring adapted to receive the torsion spring, and a roller cage retainer configured to cooperate with the traction ring to house the torsion spring. Various inventive power roller-leg assemblies can be used to facilitate shifting the ratio of a CVT. Embodiments of a hub shell and a hub cover are adapted to house components of a CVT and, in some embodiments, to cooperate with other components of the CVT to support operation and/or functionality of the CVT. Among other things, shift control interfaces and braking features for a CVT are disclosed.

Inventive embodiments are directed to components, subassemblies, systems, and/or methods for continuously variable transmissions (CVT). In one embodiment, a control system is adapted to facilitate a change in the ratio of a CVT. In another embodiment, a control system includes a stator plate configured to have a plurality of radially offset slots. Various inventive traction planet assemblies and stator plates can be used to facilitate shifting the ratio of a CVT. In some embodiments, the traction planet assemblies include planet axles configured to cooperate with the stator plate. In one embodiment, the stator plate is configured to rotate and apply a skew condition to each of the planet axles. In some embodiments, a stator driver is operably coupled to the stator plate. Embodiments of a traction sun are adapted to cooperate with other components of the CVT to support operation and/or functionality of the CVT. Among other things, shift control interfaces for a CVT are disclosed.